2BVNN-SMARTCORE100SmartCore

2BVNN-SMARTCORE100 User Manual Rev 1.0 May 11, 2026 Lumenly Lamps Inc., Proprietary 251 Little Falls Dr, Wilmington, DE 19808 Copyright © 2026 Lumenly Lamps Inc. All rights reserved. 2BVNN-SMARTCORE100 User Manual Lumenly Lamps Inc., Proprietary Rev 1.0 Contents 1. About this User Manual ....................................................................................................................... 3 2. Introduction ......................................................................................................................................... 4 2.1 Product Features ................................................................................................................................. 4 2.2 Fully integrated Linux Module ..................................................................................................... 5 3. Module Integration Instructions .......................................................................................................... 6 3.1 Pin Assignment ............................................................................................................................ 6 4. FCC Information ................................................................................................................................... 9 4.1 FCC RF Exposure Requirements ................................................................................................... 9 4.2 FCC Regulations ........................................................................................................................... 9 2BVNN-SMARTCORE100 User Manual Lumenly Lamps Inc., Proprietary Rev 1.0 1. About this User Manual This document is intended to provide the usage of module 2BVNN-SMARTCORE100. 1 2BVNN-SMARTCORE100 User Manual Lumenly Lamps Inc., Proprietary Rev 1.0 2. Introduction 2BVNN-SMARTCORE100 is a generic compact WiFi (2.4GHz and 5GHz) and Bluetooth Low Energy (BLE) module for large variety of IoT applications requiring full Linux Operating System (Ubuntu). 2BVNN- SMARTCORE100 is based on Allwinner Qual-core ARM Cortex SoC (H616), Nordic WiFi chipset (nRF7002) and Nordic BLE chipset (nRF5340). 2.1 Product Features • Qual-Core 64-bit ARM Cortex A53 processor • Support Trustzone • Support Linux Operating System (Ubuntu) • Support 2.4GHz & 5GHz • Support 802.11a, 802.11b, 802.11g, 802.11ac (20MHz), 802.11ax (20MHz), 802.11n (20MHz) • Up to 86Mbps PHY WiFi throughput • Supports WiFi WEP/WPA/WPA2/WPA3 Personal/WPA3 Enterprise • Supports STA, AP, WiFi Direct mode • Support BLE v5.2 (Up to 1Mbps) 2 2BVNN-SMARTCORE100 User Manual Lumenly Lamps Inc., Proprietary Rev 1.0 2.2 Fully integrated Linux Module 2BVNN-SMARTCORE100 has fully integrated all wireless features into Linux Operating System, Ubuntu 20.04. Users are not allowed to modify the built-in Operating System. Users can develop any Linux application, which would run on the module. 3 2BVNN-SMARTCORE100 User Manual Lumenly Lamps Inc., Proprietary Rev 1.0 3. Module Integration Instructions With the following pinout of the module, module schematic and the H616 datasheet, the module integrator can design the host device with this module. 3.1 Pin Assignment Pin Name Description J1 SDC0-D0 J2 SDC0-D1 J3 SDC0-D2 J4 SDC0-D3 J5 SDC0-CMD J6 SDC0-CLK J7 SDA-PMIC J8 SCL-PMIC J9 3.3V 4 2BVNN-SMARTCORE100 User Manual Lumenly Lamps Inc., Proprietary Rev 1.0 J10 GND J11 5V IN J12 GND J13 USB0-J616_P J14 USB0-H616_N J15 GND J16 USB-H616_P J17 USB-H616_N J18 GND 19 CPUX-UTX 20 CPUX-URX 21 GND 22 I2C-3-SCL 23 I2C-3-SDA 24 I2C-0-SCL 25 I2C-0-SDA 26 I2C-1-SCL 27 I2C-1-SDA 28 I2C-2-SCL 29 I2C-2-SDA 30 UART2-TX 31 UART2-RX 32 SPI-0-SCLK 33 SPI-0-MOSI 5 2BVNN-SMARTCORE100 User Manual Lumenly Lamps Inc., Proprietary Rev 1.0 34 SPI-0-CS 35 SPI-0-MISO 36 PWM-2 37 PWM-1 38 AP-RESET 39 GPIO-1 40 GPIO-2 41 GPIO-3 42 GPIO-4 6 Antenna Type BT ANT Antenna Gain:2.8dBi WiFi ANT 1 WiFi ANT 2 2.4G Wifi Antenna Gain:2.8dBi 2.4G Wifi Antenna Gain:2.8dBi 5.1G Wifi Antenna Gain:2.07dBi 5.8G Wifi Antenna Gain:4.0 5.1G Wifi Antenna Gain:4.0 5.8G Wifi Antenna Gain:1.72dBi dBi dBi This module is intended for OEM integrators only. Per FCC KDB 996369 D03 OEM Manual v01 guidance, the following conditions must be strictly followed when using this certified module: KDB 996369 D03 OEM Manual v01 rule sections: 2.3 Summarize the specific operational use conditions The module is tested for standalone mobile RF exposure use condition. Any other usage conditions such as co-location with other transmitter(s) or being used in a portable condition will need a separate reassessment through a class II permissive change application or new 2.2 List of applicable FCC rules This module has been tested for compliance to FCC part15.247/Part 15.407 certification. 2.6 RF exposure considerations This equipment complies with FCC mobile radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body. If the module is installed in a portable host, a separate SAR evaluation is 2.4Single module proceduresThe EUT was tested inside a specific platform (model: SmartCore 100)andSingle modular app roval for this specific platform. 2.5Antenna 1: Dipole Antenna; Antenna 2: Chip Antenna. Antennadesigns Not applicable required to confirm compliance with relevant FCC portable RF exposure rules. 2.7 Antennas The following antennas have been certified for use with this module; antennas of the same type with equal or lower gain may also be used with this module. The antenna must be installed such that 20 cm can be maintained between the antenna and users. Antenna TypeAntenna 1: Dipole Antenna;Antenna 2: Chip Antenna. 2.8 Label and compliance information The final end product must be labeled in a visible area with the following: “Contains FCC ID: 2BVNN-SMARTCORE100 ”.The grantee'sFCC ID can be used only when all FCC compliance requirements are met. 8 2.9 Information on t…

Text truncated - open the document above for the full version.

Rev1/26/2023 (LumenlyLampsInc) FederalCommunicationsCommission AuthorizationandEvaluationDivision 7435OaklandMillsRoad Columbia,MD21046 USA Date: May25,2026 Ref:AttestationStatementsPart2.911(d)(5)(i)Filing FCCID:2BVNN-SMARTCORE100 [LumenlyLampsInc]certifiesthattheequipmentforwhichauthorizationissoughtisnot “covered”equipmentprohibitedfromreceivinganequipmentauthorizationpursuanttosection 2.903oftheFCCrules. [LumenlyLampsInc]certifiesthattheequipmentforwhichauthorizationissoughtdoesnot includecybersecurityoranti-virussoftwareproducedorprovidedbyKasperskyLab,Inc.orany ofitssuccessorsandassignees,includingequipmentwithintegratedKasperskyLab,Inc.(orany ofitssuccessorsandassignees)cybersecurityoranti-virussoftwarepursuanttoDA-24-886and KDB986446D01CoveredEquipmentGuidancesectionB(2a). Deviceisinherentlycompliantbasedonhardwarelimitationsorsoftwarecontrols. or ASoftwareBillofMaterials(SBOM)isprovidedtotheTCBforreview,and Theend-userorthirdpartiescannotinstalladditionalsoftwareonthisdevice. Sincerely, (Applicantsignature) (Applicantprintedname)KennyFok Rev1/26/2023 (LumenlyLampsInc) FederalCommunicationsCommission AuthorizationandEvaluationDivision 7435OaklandMillsRoad Columbia,MD21046 USA Date: May25,2026 Ref:AttestationStatementsPart2.911(d)(5)(ii)Filing FCCID:2BVNN-SMARTCORE100 [LumenlyLampsInc]certifiesthat,asofthedateofthefilingoftheapplication,theapplicantis notidentifiedontheCoveredList(asaspecificallynamedentityoranyofitssubsidiariesor affiliates)asanentityproducing“covered”equipment. Sincerely, (Applicantsignature) (Applicantprintedname)KennyFok

LumenlyLampsInc FederalCommunicationsCommission EquipmentAuthorizationDivision 7435OaklandMillsRoad Columbia,MD21046 USA Date:May25,2026 Subject;ModularTransmitterApplication Companyname:LumenlyLampsInc FCCID:2BVNN-SMARTCORE100 DearSir/Madam, ThisletterincludestheFCCapplicationrequirementsforModularTransmitter ApprovalRequestfor;- FCCKDB996369D01‘ModuleCertificationGuidev02;and FCCKDB996369D03OEMManualv01 Inaccordancewith47CFR15.212ModularTransmittersandKDB996369D01 ‘ModuleEquipAuthGuidev02’.FCCID ： 2BVNN-SMARTCORE100hasbeen examinedagainstthefollowingrequirements. Requirementper15.212andKDB996369D01ExplanationfromGrantee (donotwriteyes/no,butexplainwhyproduct complies/howitisachieved) Theradioelementsmusthavetheradiofrequencycircuitry shielded.Physicalcomponentsandtuningcapacitor(s)maybe locatedexternaltotheshield,butmustbeonthemoduleassembly. Usetheshieldingcover Themodulemusthavebufferedmodulation/datainputstoensure thatthedevicewillcomplywithPart15requirementswithanytype ofinputsignal. Yes,Allinputstothemodulesarebuffered throughlogicormicroprocessorinputs. Themodulemustcontainpowersupplyregulationonthemodule. Yes,Alowdropoutregulatorisusedfor modularpowersupplyregulation. Themodulemustcontainapermanentlyattachedantenna,or containauniqueantennaconnector,andbemarketedandoperated onlywithspecificantenna(s),per§§15.203,15.204(b),15.204(c), 15.212(a),2.929(b). Yes,Deviceisequippedwithuniqueantenna connector. Themodulemustdemonstratecomplianceinastand-alone configuration. Yes,distancebetweenmodularandallAEs arelongerthan20cm，refertosetupphoto. ThemodulemustbelabeledwithitspermanentlyaffixedFCCID label,oruseanelectronicdisplay(seeKDBPublication784748). Yes,Themodularhasapermanentfixed label,andbelowstatementwaslistedinthe UserManual;Thehostdevicemustbelabeled todisplaytheFCCIDofthemoduleContains FCCID:2BVNN-SMARTCORE100 Themodulemustcomplywithallspecificrulesapplicabletothe transmitter,includingalltheconditionsprovidedintheintegration instructionsbythegrantee. Yes,Themodulecomplywithallspecificrules applicabletothetransmitterincludingallthe conditionsprovidedintheintegration instructionsbythegrantee,Refertotestreport andusermanual ThemodulemustcomplywithRFexposurerequirements Yes,TransmittermeetsMPEcalculationof47 CFR1.1307.RefertoMPEReportsandRefer tomodularinstallationmanual IntegrationInstructionsforhostproductmanufacturers ThefollowingitemsaresubmittedinsupportofapplicationforModularTransmitter FCCIDasnotedaboveasrequiredbytheFCCKDB996369D03OEMManualv01. Theseitemsareprovidedasintegrationinstructionsforhostproductmanufacturers (e.g.,OEMinstructionmanual)tousewhenintegratingamoduleinahostproduct. AnyrequirementsthatarenotapplicabletotheModuleareasindicatedbelow. SummaryofrequirementsandChecklist.RefertotheKDBfordescriptionofthecomplete requirements; KDB Ref Sect RequirementsofKDB996369D03UserManualPage Numberreference 2.2ListofapplicableFCCrules8 2.3Summarizethespecificoperationaluseconditions8 2.4Limitedmoduleprocedures8 2.5Traceantennadesigns8 2.6RFexposureconsiderations8 2.7Antennas8 2.8Labelandcomplianceinformation8 2.9Informationontestmodesandadditionaltesting requirements 9 2.10Additionaltesting,Part15SubpartBdisclaimer9 Name:KennyFokDate:April25,2026 Title:Manager Signatureofapplicant：

LumenlyLampsInc Date：May25,2026 ProductModelNumber:SmartCore100 FCCID：2BVNN-SMARTCORE100 Towhomitmayconcern, Re:ProductCertificationRepresentativeAuthorizationLetter WeauthorizeQAILaboratoriesLtd.3980NorthFraserWay,BurnabyB.C. CanadaV5J5K5toactonourbehalfonallmattersconcerningtheabove namedequipment. Thisshallincludethefollowing: Testing Approvalapplicationsandprocedures WedeclarethatQAILaboratoriesLtd.isallowedtoforwardallinformation relatedtotheapprovalprojecttotheappliedcertificationbodyandtothe notificationentitiesandtodiscussanyissuesconcerningtheapproval application.AnyandallactscarriedoutbyQAILaboratoriesLtd.onour behalfshallhavethesameeffectasactsofourown. By: ContactListedonFCCWesbite Title:Manager Email:[email protected] Telephone:(858)480-1028 Onbehalfof:LumenlyLampsInc

LumenlyLampsInc OfficeofEngineeringTechnology FederalCommunicationsCommission 7435OaklandMillsRoad Columbia,MD21046 USA Date:May25,2026 Subject;RequestforConfidentiality FCCID:2BVNN-SMARTCORE100 ToWhomItMayConcern, PursuanttotheprovisionsoftheCommission’srulesTitle47Sections§0.457and§0.459,we arerequestingtheCommissiontowithholdthefollowingattachment(s)asconfidential documentsfrompublicdisclosureindefinitely. Thesedocumentscontaindetailedsystemandequipmentdescriptionsandareconsideredas proprietaryinformationinoperationoftheequipment.Thepublicdisclosureofthese documentsmightbeharmfultoourcompanyandwouldgivecompetitorsanunfairadvantage inthemarket. SchematicDiagram BlockDiagram PartsList OperationalDescription Tune-upProcedure SoftwareSecurityRequirementsforUNIIdevices Inadditionaltoabovementioneddocuments,inordertocomplywiththemarketingregulations inTitle47CFR§2.803andtheimportationrulesinTitle47CFR§2.1204,whileensuringthat businesssensitiveinformationremainsconfidentialuntiltheactualmarketingofnewly authorizeddevices,werequestShortTermConfidentialityofthefollowingattachment(s); ExternalPhotos TestSetupPhotos InternalPhotos UserManual For45days,pursuanttoPublicNoticeDA04-1705. OR For180dayspursuanttoKDB726920D01. Itisourunderstandingthatallmeasurementtestreports,FCCIDlabelformatand correspondenceduringthecertificationreviewprocesscannotbegrantedasconfidential documentsandthisinformationwillbeavailableforpublicreviewoncethegrantofequipment authorizationisissued. Sincerely, Signature: Name:KennyFok Title:Manager

ReportNo.:AB26040428 Page 1 of 2 AppendixBEUTExternalPhotos WIFIANT1 WIFIANT2 BTANT ReportNo.:AB26040428 Page 2 of 2

LabelandInformation FCCLabelSample Size:0.5cm*0.5cm FCCLabelSpecifications TextisBlackincolorandisjustified.Labelsareprintedinindelibleinkonpermanentadhesivebacking orsilk-screenedontotheEUTorshallbeaffixedataconspicuouslocationontheEUT.WheretheEUT isconstructedintwoormoresectionsconnectedbywiresandmarketedtogether,theabovestatement isrequiredtobeaffixedonlytothemaincontrolunit.WhentheEUTissosmallorforsuchusethatitis notpracticabletoplacethestatementonit,theaboveinformationshallbeplacedinaprominentlocation intheinstructionmanualorpamphletsuppliedtotheuseror,alternatively,shallbeplacedonthe containerinwhichthedeviceismarketed. FCCLabelLocation FCCID:2BVNN-SMARTCORE100

ReportNo.:AB26040428 Page1of2 AppendixCInternalPhotos ReportNo.:AB26040428 Page2of2

ReportNo.:AB26040428FW04 AiboStandardTechnology(Shenzhen)Co.,Ltd. 101,BuildingB,TuoriNewEnergyIndustrialPark,High-techPark,TianliaoCommunity,YutangStreet, GuangmingDistrict,ShenzhenCity,GuangdongProvince,China Tel.:+8675585250797E-mail:[email protected]:www.aibonorm.com FCCTESTREPORT ReportNo..............................................: AB26040428FW04 FCCID...................................................:2BVNN-SMARTCORE100 Applicant................................................:LumenlyLampsInc Address.................................................:251LittleFallsDr,Wilmington,DE19808 Manufacturer......................................: eSmartTechInc. Address..............................................: 16835WBernardoDr.,Suite205,SanDiegoCA92127 ProductName ...................................... : SmartCore TradeMark............................................: / TestModel.............................................: SmartCore100 AdditionalModel(s) .............................. : / Standard ................................................ : FCCPart2(Section2.1091) KDB447498D01v06 IEEEC95.1 DateofReceipt....................................:2026.04.23 DateofIssue........................................:2026.05.09 TestResult............................................:Pass Compiledby: (PrintedName+Signature) HuaijieLi Supervisedby: (PrintedName+Signature) DavidHuang Approvedby: (PrintedName+Signature) JayLiu TestingLaboratoryName ................... :AiboStandardTechnology(Shenzhen)Co.,Ltd. Address ................................................. :101,BuildingB,TuoriNewEnergyIndustrialPark,High-techPark, TianliaoCommunity,YutangStreet,GuangmingDistrict,Shenzhen City,GuangdongProvince,China Thistestreportmaybeduplicatedcompletelyforlegalusewiththeapprovaloftheapplicant.Itshouldnotbe reproducedexceptinfull,withoutthewrittenapprovalofourlaboratory.Theclientshouldnotuseittoclaim productendorsementbyAibo.Thetestresultsinthereportonlyapplytothetestedsample.Thetestreport shallbeinvalidwithoutallthesignaturesoftestingengineers,reviewerandapprover.Anyobjectionsmustbe raisedtoAibowithin15dayssincethedatewhenthereportisreceived.Itwillnotbetakenintoconsideration beyondthislimit.Thetestreportmerelycorrespondtothetestsample. ReportNo.:AB26040428FW04 Page2of9 AiboStandardTechnology(Shenzhen)Co.,Ltd FCCTESTREPORT TestResultPositive Thetestreportmerelycorrespondstothetestsample. Itisnotpermittedtocopyextractsofthesetestresultwithoutthewrittenpermissionofthetestlaboratory. EUT......................................... : SmartCore TestModel.............................. : SmartCore100 Applicant...............................:LumenlyLampsInc Address...................................:251LittleFallsDr,Wilmington,DE19808 Manufacturer......................... : eSmartTechInc. Address...................................: 16835WBernardoDr.,Suite205,SanDiegoCA92127 ReportNo.:AB26040428FW04 Page3of9 AiboStandardTechnology(Shenzhen)Co.,Ltd REPORTVERSION VersionNo.IssueDateDescription 012026.05.09InitialIssue ReportNo.:AB26040428FW04 Page4of9 AiboStandardTechnology(Shenzhen)Co.,Ltd TABLEOFCONTENTS 1.GENERALINFORMATION.........................................................................................................................................5 1.1.GENERALDESCRIPTIONOFEUT.........................................................................................................................5 1.2.DESCRIPTIONOFTESTFACILITY........................................................................................................................7 2.RFEXPOSUREEVALUATION...................................................................................................................................8 2.1LIMIT.................................................................................................................................................................................8 2.2EVALUATIONRESULT......................................................................................................................................................9 ReportNo.:AB26040428FW04 Page5of9 AiboStandardTechnology(Shenzhen)Co.,Ltd 1.GENERALINFORMATION 1.1.GENERALDESCRIPTIONOFEUT ProductName:SmartCore TradeMark:/ TestModel:SmartCore100 AdditionalModel(s): / HardwareVersion:/ SoftwareVersion:/ PowerSupply:DC5V/1.2A EUTSupportsFunction: (Providedbythecustomer) 2.4GHzISMBands TestSample(s)Number: AB26040428-01(EngineerSample) AB26040428-02(NormalSample) RadioSpecificationSubjecttothisReport BluetoothVersion:BluetoothLE FrequencyRange:2402MHz~2480MHz ModulationType:GFSK ChannelSpacing:2MHz ChannelNumber(s):40 AntennaType:Chipantenna AntennaGain:2.8dBi RadioSpecificationSubjecttothisReport RadioSpecification:IEEE802.11b/g/n/ax FrequencyRange:2412MHz~2462MHzforIEEE802.11b/g/n(HT20)/ax(HE20) ModulationType: IEEE802.11b:DSSS(CCK,DQPSK,DBPSK) IEEE802.11g:OFDM(64-QAM,16-QAM,QPSK,BPSK) IEEE802.11n(HT20):OFDM(64-QAM,16-QAM,QPSK,BPSK) IEEE802.11ax(HE20):OFDM(1024-QAM,256-QAM,64-QAM,16-QAM, QPSK,BPSK) ChannelSpacing:5MHz ChannelNumber(s):11ChannelsforIEEE802.11b/g/n(HT20)/ax(HE20) AntennaType: Antenna1:DipoleAntenna; Antenna2:ChipAntenna. AntennaGain: ANT1:1.27dBi ANT2:2.8dBi RadioSpecificationSubjecttothisReport RadioSpecification:IEEE802.11a/n/ac/ax FrequencyRange:5180MHz~5240MHzforU-NIIBand1 ReportNo.:AB26040428FW04 Page6of9 AiboStandardTechnology(Shenzhen)Co.,Ltd 5745MHz~5825MHzforU-NIIBand3 ModulationType: IEEE802.11a:OFDM(64QAM,16QAM,QPSK,BPSK) IEEE802.11n:OFDM(64-QAM,16-QAM,QPSK,BPSK) IEEE802.11ac:OFDM(256QAM,64QAM,16QAM,QPSK,BPSK) IEEE802.11ax:OFDM(1024QAM,256QAM,64QAM,16QAM,QPSK, BPSK) ChannelSpacing: IEEE802.11a/n(HT20)/ac(VHT20)/ax(HE20):20MHz ChannelNumber(s):U-NIIBand1: 4forIEEE802.11a/n(HT20)/ac(VHT20)/ax(HE20) U-NIIBand3: 5forIEEE802.11a/n(HT20)/ac(VHT20)/ax(HE20) AntennaType: Antenna1:Dipoleantenna Antenna2:Chipantenna AntennaGain: U-NIIBand1: ANT1:2.07dBi ANT2:4.0dBi U-NIIBand3: ANT1:1.72dBi ANT2:4.0dBi TPCF…

Text truncated - open the document above for the full version.

P/N: 2450AD14A5500001T Legacy P/N: 2450AD14A5500 Doc# 36S0021A Page 1 of 14 / Revision 4.0 Datasheet: 2450AD14A5500001T johansontechnology.com 4001 Calle Tecate • Camarillo, CA 93012, USA • +1.805-389-1166 2024 Johanson Technology, Inc. All Rights Reserved Dual Band 2.44 and 5.5 GHz RF Chip Antenna •2.4 – 2.48 and 5.15 – 5.85 GHz pass band •IEEE 802.11, Wi-Fi, WLAN, IoT •Mini SMD, EIA 0603 •Corner mount •RoHS compliant and AEC-Q200 Qualified available Johanson Technology, Inc. (JTI) miniature RF ceramic chip antennas are made using Low Temperature Co-fired Ceramic (LTCC) technology which has the ability to embed low and high dielectric constants inside our antenna. This enables our components to have high detuning resilience and stability over extreme temperatures (~2ppm). General Specifications 1 2 Maximum Ratings 1 Typical value represents average measurement at 25°C. Min./Max. values represent measurements over specified operating temperature. 2 Peak and Average Gains measured on Johanson’s evaluation board P/N 2450AD14A5500001CE2. Passband Frequency (MHz) 2400 - 2480 5150 - 5850 Impedance (Ω) 50 50 Return Loss (dB) 7.2 Typ. (2.7 Min.) 9.5 Typ. (3.9 Min.) Peak Gain (dBi) 2.8 Typ. 4.0 Typ. Average Gain (dBi) -3.5 Typ.-2.5 Typ. Average Radiated Efficiency (%) – EVB1 5382 Average Radiated Efficiency (%) – EVB2 58 72 Power Capacity (W) 2 Max. (CW) Operating Temperature (°C) -40 to +85 Recommended Storage Conditions post-installation (°C) -40 to +85 Recommended Storage Conditions and Period for Unused T&R Product 45% - 75% RH +5 to +35 °C 18 Months Max. PCB Corner Recommended mounting locations for this antenna P/N: 2450AD14A5500001T Legacy P/N: 2450AD14A5500 Doc# 36S0021A Page 2 of 14 / Revision 4.0 Datasheet: 2450AD14A5500001T johansontechnology.com 4001 Calle Tecate • Camarillo, CA 93012, USA • +1.805-389-1166 2024 Johanson Technology, Inc. All Rights Reserved Mechanical Dimensions Terminal Configuration 3 4 3 Terminals 2 and 4 have two pads each, and both terminals can function as Feed. NC ("No Connect") terminals must be soldered down to the landing pad for proper operation. 4 The termination type is Nickel Tin. Go to: https://www.johansontechnology.com/ipcsoldering-profile for Typical Soldering Profile. Pin Number Function Scenario 1 Scenario 2 1 GND GND 2 Feed NC 3 NC NC 4 NC Feed Bottom view Top view (looking "through" the component) Side view ② ① ③ ④ e f a d c b g h T W L L 0.063 ± 0.004 1.60 ± 0.10 W 0.031 ± 0.004 0.80 ± 0.10 T 0.016 0.40 a 0.003 ± 0.004 0.086 ± 0.10 b 0.008 0.208 c 0.008 ± 0.001 0.20 ± 0.03 d 0.003 ± 0.001 0.085 ± 0.03 e 0.008 ± 0.002 0.215 ± 0.05 f 0.010 ± 0.002 0.25 ± 0.05 g 0.006 0.15 h 0.008 ± 0.001 0.20 ± 0.03 Min. Max. Min. Min. I nches Millimeters Max. Min. P/N: 2450AD14A5500001T Legacy P/N: 2450AD14A5500 Doc# 36S0021A Page 3 of 14 / Revision 4.0 Datasheet: 2450AD14A5500001T johansontechnology.com 4001 Calle Tecate • Camarillo, CA 93012, USA • +1.805-389-1166 2024 Johanson Technology, Inc. All Rights Reserved 0.25 1.0nH 5.8 3 0.65 4.1 0.35 0.21 0.3 0.29 0.15 0.5 0.6 0.45 0.4 1.1 0.15 0.6 3.5 1.43 Floating Floating 0.15 Evaluation Board and Recommended Mounting Configuration 1 (P/N 2450AD14A5500001CE1) – 70x40mm (Scenario 1) Top View JTI P/Ns for Matching Network 5 Inductor (1.0nH): LRC0402CS1N0GV001T *Note: Ground Vias are highly recommended to have better antenna efficiency. 5 It is recommended that the designer leave available slots for a "pi" (or shunt-series-shunt) network. The antenna matching network values above are used when the antenna is mounted on Johanson's evaluation board. The optimal matching values will vary depending on the layout, thickness, material, etc. Go to: https://www.johansontechnology.com/tuning for more information. 8 70 40 5 All units in mm Ground Clearance 50Ω Feed Line Ground Vias* Antenna Matching Network 50Ω GCPW This section should be clear of all metal layers (antenna clearance area) Antenna Matching Network Ground Vias* Land Solder Resist Vias to the other side of the PCB (see bottom layout below) P/N: 2450AD14A5500001T Legacy P/N: 2450AD14A5500 Doc# 36S0021A Page 4 of 14 / Revision 4.0 Datasheet: 2450AD14A5500001T johansontechnology.com 4001 Calle Tecate • Camarillo, CA 93012, USA • +1.805-389-1166 2024 Johanson Technology, Inc. All Rights Reserved Bottom View *Note: Ground Vias are highly recommended to have better antenna efficiency. If you’d like the CAD PCB layout or have any questions, contact our application engineers at https://www.johansontechnology.com/ask-a-question 4.1 0.65 0.25 5.66 2.2 0.14 Not Connected! Vias to the other side of the PCB Ground Vias* P/N: 2450AD14A5500001T Legacy P/N: 2450AD14A5500 Doc# 36S0021A Page 5 of 14 / Revision 4.0 Datasheet: 2450AD14A5500001T johansontechnology.com 4001 Calle Tecate • Camarillo, CA 93012, USA • +1.805-389-1166 2024 Johanson Technology, Inc. All Rights Reserved Evaluation Board Typical Return Loss Measurement (P/N 2450AD14A5500001CE1) 2.5 3.0 3.5 4.0 4.5 5.0 5.5 2.0 6.0 -20 -15 -10 -5 -25 0 freq, GHz dB(S(1,1)) Readout m129 Readout m130 Readout m131 Readout m132 Readout m133 Readout m134 m129 freq= dB(S(1,1))=-18.254 2.442GHz m130 freq= dB(S(1,1))=-7.250 2.400GHz m131 freq= dB(S(1,1))=-8.854 2.484GHz m132 freq= dB(S(1,1))=-9.557 5.150GHz m133 freq= dB(S(1,1))=-20.673 5.500GHz m134 freq= dB(S(1,1))=-10.013 5.850GHz freq (2.000GHz to 6.000GHz) S(1,1) Readout m128 Readout m135 m128 freq= S(1,1)=0.122 / 95.014 impedance = 47.527 + j11.753 2.442GHz m135 freq= S(1,1)=0.093 / 81.368 impedance = 50.543 + j9.329 5.500GHz 2.5 3.0 3.5 4.0 4.5 5.0 5.5 2.0 6.0 -20 -15 -10 -5 -25 0 freq, GHz dB(S(1,1)) Readout m129 Readout m130 Readout m131 Readout m132 Readout m133 Readout m134 m129 freq= dB(S(1,1))=-18.254 2.442GHz m130 freq= dB(S(1,1))=-7.250 2.400GHz m131 freq= dB(S(1,1))=-8.854 2.484GHz m132 freq= dB(S(1,1))=-9.557 5.150GHz m133 freq= dB(S(1,1))=-20.673 5.500GHz m134 freq= dB(S(1,1))=-10.013 5.850GHz freq (2.000GHz to 6.000GHz) S(1,1) Readout m128 Readout m135 m128 freq= S…

Text truncated - open the document above for the full version.

P/N: 2450AT18B0100001E Legacy P/N: 2450AT18B100 Doc# 36S0021A Page 1 of 6 / Revision 5.0 Datasheet: 2450AT18B0100001E johansontechnology.com 4001 Calle Tecate • Camarillo, CA 93012, USA • +1.805-389-1166 2024 Johanson Technology, Inc. All Rights Reserved 2.45 GHz RF Chip Antenna • 2.4 – 2.5 GHz Operational frequency • Bluetooth, WLAN • SMD, EIA 1206 • Corner mount • RoHS compliant Johanson Technology, Inc. (JTI) miniature RF ceramic chip antennas are made using Low Temperature Co-fired Ceramic (LTCC) technology which has the ability to embed low and high dielectric constants inside our antenna. This enables our components to have high detuning resilience and stability over extreme temperatures (~2ppm). General Specifications 1 2 Maximum Ratings 1 Typical value represents average measurement at 25°C. Min./Max. values represent measurements over specified operating temperature. 2 General specifications measured on Johanson’s evaluation board P/N 2450AT18B0100001CE1. Operational Frequency (MHz) 2400 - 2500 Impedance (Ω) 50 Return Loss (dB) 9.5 Min. Peak Gain (dBi) 2.8 Typ. Average Gain (dBi) 0.0 Typ. Average Radiated Efficiency (%) 75 Power Capacity (W) 3 Max. (CW) Operating Temperature (°C) -40 to +125 Recommended Storage Conditions post-installation (°C) -40 to +125 Recommended Storage Conditions and Period for Unused T&R Product 45% - 75% RH +5 to +35 °C 18 Months Max. PCB Corner Recommended mounting locations for this antenna P/N: 2450AT18B0100001E Legacy P/N: 2450AT18B100 Doc# 36S0021A Page 2 of 6 / Revision 5.0 Datasheet: 2450AT18B0100001E johansontechnology.com 4001 Calle Tecate • Camarillo, CA 93012, USA • +1.805-389-1166 2024 Johanson Technology, Inc. All Rights Reserved Mechanical Dimensions Terminal Configuration 3 3 The termination type is Nickel Tin. Go to: https://www.johansontechnology.com/ipcsoldering-profile for Typical Soldering Profile.  This terminal must be soldered for anchoring and mechanical stability. Pin Number Function 1 Feed 2 NC  Bottom view Top view Side view ② ① a a L W T L0.126±0.0083.20±0.20 W0.063±0.0081.60±0.20 T0.0511.30 a0.020±0.0120.50±0.30 I nchesMillimeters +0.10/-0.20 +0.004/-0.008 P/N: 2450AT18B0100001E Legacy P/N: 2450AT18B100 Doc# 36S0021A Page 3 of 6 / Revision 5.0 Datasheet: 2450AT18B0100001E johansontechnology.com 4001 Calle Tecate • Camarillo, CA 93012, USA • +1.805-389-1166 2024 Johanson Technology, Inc. All Rights Reserved Evaluation Board and Recommended Mounting Configuration (P/N 2450AT18B0100001CE1) *Note: Ground Vias are highly recommended to have better antenna efficiency. JTI P/N’s for Matching Network 4 Capacitor (1.2pF): QSCF500Q1R2B1GV001T Inductor (2.7nH): LRC0402CS2N7GV001T Inductor (3.3nH): LRC0402CS3N3GV001T If you’d like the CAD PCB layout or have any questions, contact our application engineers at https://www.johansontechnology.com/ask-a-question 4 It is recommended that the designer leave available slots for a "tee" (or series-shunt-series) network. The antenna matching network values above are used when antenna is mounted on Johanson's evaluation board. The matching values on client’s PCB will be different, depending on the layout, thickness, material, etc. Go to: https://www.johansontechnology.com/tuning and see how to obtain the new values. 2.6 4.2 1.6 1.9 0.4 2.7nH 1.2pF 3.3nH ) ) 13.5 6.5 39.5 6.5 4 All units in mm 50Ω Feed Line Ground Vias* Ground Clearance Antenna Matching Network 50Ω GCPW Antenna Matching Network GND Plane GND Plane P/N: 2450AT18B0100001E Legacy P/N: 2450AT18B100 Doc# 36S0021A Page 4 of 6 / Revision 5.0 Datasheet: 2450AT18B0100001E johansontechnology.com 4001 Calle Tecate • Camarillo, CA 93012, USA • +1.805-389-1166 2024 Johanson Technology, Inc. All Rights Reserved Evaluation Board Typical Return Loss Measurement (P/N 2450AT18B0100001CE1) Evaluation Board Typical 2D Radiation Patterns @2450 MHz (P/N 2450AT18B0100001CE1) +X +Y -X -Y +Z +X -Z -X +Z -Z -Y +Y -Y +Z (0°) +Y (90°) -Z -X +Z (0°) -Z +X (90°) -X -Y …

Text truncated - open the document above for the full version.