2BVQU-JDSMARTJD-A19-9W-RC

50% Brightness:6000K Decrease Color Temperature (down to 3000K) Natural Light Mode (100% Brightness, Indicator Light One-Hour Timer 4000K) Power On/Off Increase Brightness Increase Color Temperature (up to Three-Step Color Temperature 3000-4000-6000K 50% Brightness:3000K 6000K) Decrease Brightness 30% Brightness:3000K 50 % Brightness: 4000K Reset to Factory Settings: 1. Turn the bulb on-off twice within 3 seconds. When the bulb flashes once, it indicates factory reset (100 % brightness, 3000K). on-off for 2 cycles FCCWARNING Thisdevicecomplieswithpart15oftheFCCRules.Operationissubjecttoth efollowingtwoconditions:(1)Thisdevicemaynotcauseharmfulinterference, and(2)thisdevicemustacceptanyinterferencereceived,includinginterfere ncethatmaycauseundesiredoperation. FCCwarning: AnyChangesormodificationsnotexpresslyapprovedbythepartyresponsibl eforcompliancecouldvoidtheuser'sauthoritytooperatetheequipment. Note:Thisequipmenthasbeentestedandfoundtocomplywiththelimitsfor aClassBdigitaldevice,pursuanttopart15oftheFCCRules.Theselimitsar edesignedtoprovidereasonableprotectionagainstharmfulinterferenceina residentialinstallation.Thisequipmentgeneratesusesandcanradiateradiof requencyenergyand,ifnotinstalledandusedinaccordancewiththeinstructi ons,maycauseharmfulinterferencetoradiocommunications.However,there is no guarantee that interference will not occur in a particular installation. If thi s equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is enc ouraged to try to correct the interference by one or more of the following meas ures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which t he receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement. The device can be used exposure condition without restriction.

Apr 2026

Jiangsu JD Smart Electrical Appliance Co., Ltd. 2.911 (d)(5)(i) Equipment Type Attestation v1.2 Section 2.911(d)(5)(i) Certification – Equipment Type Company name: Jiangsu JD Smart Electrical Appliance Co., Ltd. Address: 1-3 F, building a 5, new town industrial park, north of Lianyungang, China Product Name: JD-A19-9W-RC Model Number(s): JD-A19-9W-RC FCC ID: 2BVQU-JDSMART 2.911(d)(5)(i) Equipment Type We, Jiangsu JD Smart Electrical Appliance Co., Ltd.certify that the equipment for which authorization is sought through certification is not:  Prohibited from receiving an equipment authorization pursuant to § 2.903; of the FCC rules.  Identified as an equipment type in the “Covered List” NOTE 1 Yours sincerely, Signature: Name: MENGHWEN GAO Date: 2026/05/13 Title: Sales Manager Company name: Jiangsu JD Smart Electrical Appliance Co., Ltd. NOTE 1 “Covered List”; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References; 1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the

Jiangsu JD Smart Electrical Appliance Co., Ltd. 2.911 (d)(5)(ii) Applicant Attestation v1.3 Section 2.911(d)(5)(ii) Certification – Applicant (Covered List ) Company name: Jiangsu JD Smart Electrical Appliance Co., Ltd. Address: 1-3 F, building a 5, new town industrial park, north of Lianyungang, China Product Name: JD-A19-9W-RC Model Number(s): JD-A19-9W-RC FCC ID: 2BVQU-JDSMART 2.911(d)(5)(ii) Applicant filing We, Jiangsu JD Smart Electrical Appliance Co., Ltd.certify that, as of the date of the filing of the application, the applicant is not on the “Covered List” NOTE 1 , established pursuant to § 1.50002 of this chapter, as an entity producing covered communications equipment. Yours sincerely, Signature: Name: MENGHWEN GAO Date: 2026/05/13 Title: Sales Manager Company name: Jiangsu JD Smart Electrical Appliance Co., Ltd. NOTE 1 “Covered List”; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References; 1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the

Jiangsu JD Smart Electrical Appliance Co., Ltd. Agent Authorization Company: Jiangsu JD Smart Electrical Appliance Co., Ltd. Address: 1-3 F, building a 5, new town industrial park, north of Lianyungang, China Product Name: JD-A19-9W-RC Model Number(s): JD-A19-9W-RC FCC ID: 2BVQU-JDSMART We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature: Date: 2026/05/13 Name: MENGHWEN GAO Title: Sales Manager Company: Jiangsu JD Smart Electrical Appliance Co., Ltd.

Jiangsu JD Smart Electrical Appliance Co., Ltd. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2025/05/13 Subject; Request for Confidentiality FCC ID: 2BVQU-JDSMART To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Operational Description In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuantto KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: MENGHWEN GAO Title: Sales Manager

External Photos

20*10mm Label Location FCC ID: 2BVQU-JDSMART

Internal Photos Antenna

The test results presented in this report relate only to the object tested. This report shall not be reproduced, except in full, without the written approval of the ShenZhen STS Test Services Co., Ltd. MPE Report Report No.: STS2604425H01 Issued for Jiangsu JD Smart Electrical Appliance Co. , Ltd. 1-3 F, building a 5, new town industrial park, north of Lianyungang, China Product Name: JD-A19-9W-RC Brand Name: N/A Model Name: JD-A19-9W-RC Series Model(s): N/A FCC ID: 2BVQU-JDSMART Test Standards: FCC 47CFR §2.1093 Page 2 of 8 Report No.: STS2604425H01 TEST REPORT Applicant’s Name ................. : Jiangsu JD Smart Electrical Appliance Co. , Ltd. Address ................................. : 1-3 F, building a 5, new town industrial park, north of Lianyungang, China Manufacturer's Name ........... : Jiangsu JD Smart Electrical Appliance Co. , Ltd. Address ................................. : 1-3 F, building a 5, new town industrial park, north of Lianyungang, China Product Description Product Name ........................ : JD-A19-9W-RC Brand Name .......................... : N/A Model Name .......................... : JD-A19-9W-RC Series Model(s) ...................... : N/A Test Standards ..................... : FCC 47CFR §2.1093 447498 D01 Interim General RF Exposure Guidance v06 The test results presented in this report relate only to the object tested. This report shall not be reproduced, except in full, without the written approval of the ShenZhen STS Test Services Co., Ltd. Date of Test ........................................... : Date of receipt of test item ...................... : 2026-04-16 Date (s) of performance of tests ............. : 2026-04-17 to 2026-05-08 Date of Issue .......................................... : 2026-05-12 Test Result .............................................. : Pass Testing Engineer : (Aaron Bu) Technical Manager : (Skylar Li) Authorized Signatory : (Bovey Yang) Page 3 of 8 Report No.: STS2604425H01 TABLE OF CONTENTS 1. GENERAL INFORMATION 5 1.1 GENERAL DESCRIPTION OF THE EUT 5 1.2 TEST FACTORY 5 2. FCC 47CFR §2.1093 REQUIREMENT 6 2.1 TEST STANDARDS 6 2.2 LIMIT 6 2.3 TEST RESULT 8 Page 4 of 8 Report No.: STS2604425H01 Revision History Rev. Issue Date Report No. Effect Page Contents 00 2026-05-12 STS2604425H01 ALL Initial Issue Page 5 of 8 Report No.: STS2604425H01 1. GENERAL INFORMATION 1.1 GENERAL DESCRIPTION OF THE EUT Product Name JD-A19-9W-RC Brand Name N/A Model Name JD-A19-9W-RC Series Model(s) N/A Product Description The EUT is JD-A19-9W-RC Operation Frequency: 2445 MHz Modulation Type: GFSK Antenna gain: -6.08dBi Antenna Designation: PCB antenna Power Rating DC 3V 1.2 TEST FACTORY SHENZHEN STS TEST SERVICES CO., LTD Add. : 101, Building B, Zhuoke Science Park, No.190 Chongqing Road, ZhanChengShequ, Fuhai Sub-District, Bao’an District, Shenzhen, Guang Dong, China FCC test Firm Registration Number: 625569 IC test Firm Registration Number: 12108A A2LA Certificate No.: 4338.01 Page 6 of 8 Report No.: STS2604425H01 2. FCC 47CFR §2.1093 REQUIREMENT 2.1 TEST STANDARDS The limit for Maximum Permissible Exposure (MPE) specified in KDB 447498 D01 General RF Exposure Guidance v06 is followed. The gain of the antennas used in the product is extracted from the Antenna data sheets provided and also the maximum total power input to the antenna is measured. Through the Friis transmission formula and the maximum gain of the antenna, we can calculate the distance, away from the product, where the limit of MPE is reached. Although the Friis Transmission formula is far field assumption, the calculated result of that is an over-prediction for near field power density. It is taken as worst case to specify the safety range. 2.2 LIMIT Approximate SAR Test Exclusion Power Thresholds at Selected Frequencies and Test Separation Distances are illustrated in the following Table. Page 7 of 8 Report No.: STS2604425H01 The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] • [√f(GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR,where f(GHz) is the RF channel transmit frequency in GHz. Power and distance are rounded to the nearest mW and mm before calculation The result is rounded to one decimal place for comparison The test exclusions are applicable only when the minimum test separation distance is ≤ 50 mm and for transmission frequencies between 100 MHz and 6 GHz. When the minimum test separation distance is < 5 mm, a distance of 5 mm is applied to determine SAR test exclusion. Page 8 of 8 Report No.: STS2604425H01 2.3 TEST RESULT Maximum measured transmitter power. Worst Case Mode frequency Maximum Output Power Tune up tolerance Max Tune up GHz dBm dBm dBm GFSK 2.445 3.25 3±1 4 Evaluation Result Mode Frequency Antenna Distance RF output power including tune up (dBm) SAR Test Exclusion Threshold SAR Test Exclusion Estimated SAR GHz mm dBm mw GFSK 2.445 5 4 2.51 0.10474 Yes / Note: 1. Remark: The worst case gain of the antenna is -6.08dBi. 2. Threshold at which no SAR required is 0.10474≤ 3.0 for 1-g SAR, Separation distance ≤ 5mm. ※※※※※END OF THE REPORT※※※※※

标迪电路技术 ( 深圳）有 限公司Biody CircuitTechnology (Shenzhen)Co., Ltd. Frequency （ MHz ）： 2445 Gain （ dBi ）： -6.08 Antenna Type ： PCB Impedance （ Ω ）： 50 Test Results Frequency/Mhz Gain （ dBi ） Efficiency (%) 2445 -6.08 24.66

The test results presented in this report relate only to the object tested. This report shall not be reproduced, except in full, without the written approval of the Shenzhen STS Test Services Co., Ltd. Radio Test Report Report No.: STS2604425W01 Issued for Jiangsu JD Smart Electrical Appliance Co. , Ltd. 1-3 F, building a 5, new town industrial park, north of Lianyungang, China Product Name: JD-A19-9W-RC Brand Name: N/A Model Name: JD-A19-9W-RC Series Model(s): N/A FCC ID: 2BVQU-JDSMART Test Standards: FCC Part15.247 Page 2 of 36 Report No.: STS2604425W01 TEST REPORT Applicant’s Name ................. : Jiangsu JD Smart Electrical Appliance Co. , Ltd. Address ................................. : 1-3 F, building a 5, new town industrial park, north of Lianyungang, China Manufacturer's Name .......... : Jiangsu JD Smart Electrical Appliance Co. , Ltd. Address ................................. : 1-3 F, building a 5, new town industrial park, north of Lianyungang, China Product Description Product Name ....................... : JD-A19-9W-RC Brand Name .......................... : N/A Model Name .......................... : ... : JD-A19-9W-RC Series Model(s) .................... : N/A Test Standards ..................... : FCC Part15.247 Test Procedure ...................... : ANSI C63.10-2020 This device described above has been tested by STS, the test results show that the equipment under test (EUT) is in compliance with the FCC requirements. And it is applicable only to the tested sample identified in the report. The test results presented in this report relate only to the object tested. This report shall not be reproduced, except in full, without the written approval of the Shenzhen STS Test Services Co., Ltd. Date of Test ........................................... : Date of receipt of test item ..................... : 2026-04-16 Date (s) of performance of tests ............. : 2026-04-17 to 2026-05-08 Date of Issue .......................................... : 2026-05-12 Test Result.............................................. : Pass Testing Engineer : Technical Manager : Authorized Signatory : Page 3 of 36 Report No.: STS2604425W01 Table of Contents Page 1. SUMMARY OF TEST RESULTS 6 1.1 TEST FACTORY 7 1.2 MEASUREMENT UNCERTAINTY 7 2. GENERAL INFORMATION 8 2.1 GENERAL DESCRIPTION OF THE EUT 8 2.2 DESCRIPTION OF THE TEST MODES 9 2.3 TEST SOFTWARE AND POWER LEVEL 10 2.4 BLOCK DIAGRAM SHOWING THE CONFIGURATION OF SYSTEM TESTED 10 2.5 DESCRIPTION OF NECESSARY ACCESSORIES AND SUPPORT UNITS 11 2.6 EQUIPMENTS LIST 12 RF RADIATION TEST EQUIPMENT 12 3. EMC EMISSION TEST 13 3.1 CONDUCTED EMISSION MEASUREMENT 13 3.2 TEST PROCEDURE 14 3.3 TEST SETUP 14 3.4 EUT OPERATING CONDITIONS 14 3.5 TEST RESULTS 14 4. RADIATED EMISSION MEASUREMENT 15 4.1 RADIATED EMISSION LIMITS 15 4.2 TEST PROCEDURE 17 4.3 TEST SETUP 18 4.4 EUT OPERATING CONDITIONS 18 4.5 FIELD STRENGTH CALCULATION 19 4.6 TEST RESULTS 20 5. CONDUCTED SPURIOUS & BAND EDGE EMISSION 25 5.1 LIMIT 25 5.2 TEST PROCEDURE 25 5.3 TEST SETUP 25 5.4 EUT OPERATION CONDITIONS 25 5.5 TEST RESULTS 25 6. POWER SPECTRAL DENSITY TEST 26 6.1 LIMIT 26 Page 4 of 36 Report No.: STS2604425W01 Table of Contents Page 6.2 TEST PROCEDURE 26 6.3 TEST SETUP 26 6.4 EUT OPERATION CONDITIONS 26 6.5 TEST RESULTS 26 7. BANDWIDTH TEST 27 7.1 LIMIT 27 7.2 TEST PROCEDURE 27 7.3 TEST SETUP 27 7.4 EUT OPERATION CONDITIONS 27 7.5 TEST RESULTS 27 8. PEAK OUTPUT POWER TEST 28 8.1 LIMIT 28 8.2 TEST PROCEDURE 28 8.3 TEST SETUP 28 8.4 EUT OPERATION CONDITIONS 28 8.5 TEST RESULTS 28 9. ANTENNA REQUIREMENT 29 9.1 STANDARD REQUIREMENT 29 9.2 EUT ANTENNA 29 APPENDIX 1-TEST DATA 30 MAXIMUM CONDUCTED OUTPUT POWER 30 -6DB BANDWIDTH 31 OCCUPIED CHANNEL BANDWIDTH 32 MAXIMUM POWER SPECTRAL DENSITY LEVEL 33 BAND EDGE 34 CONDUCTED RF SPURIOUS EMISSION 35 APPENDIX 2- EUT TEST PHOTO 36 Page 5 of 36 Report No.: STS2604425W01 Revision History Rev. Issue Date Report No. Effect Page Contents 00 2026-05-12 STS2604425W01 ALL Initial Issue Page 6 of 36 Report No.: STS2604425W01 1. SUMMARY OF TEST RESULTS Test procedures according to the technical standards: KDB 558074 D01 15.247 Meas Guidance v05r02. FCC Part 15.247,Subpart C Standard Section Test Item Judgment Remark 15.207 Conducted Emission N/A -- 15.247 (a)(2) 6dB Bandwidth PASS -- 15.247 (b)(3) Output Power PASS -- 15.209 Radiated Spurious Emission PASS -- 15.247 (d) Conducted Spurious & Band Edge Emission PASS -- 15.247 (e) Power Spectral Density PASS -- 15.205 Restricted bands of operation PASS -- Part 15.247(d)/ Part 15.209(a) Band Edge Emission PASS -- 15.203 Antenna Requirement PASS -- Note: (1) ‘N/A’ denotes test is not applicable in this Test Report. (2) All tests are according to ANSI C63.10-2020. Page 7 of 36 Report No.: STS2604425W01 1.1 TEST FACTORY SHENZHEN STS TEST SERVICES CO., LTD Add. : 101, Building B, Zhuoke Science Park, No.190 Chongqing Road, ZhanChengShequ, Fuhai Sub-District, Bao’an District, Shenzhen, Guang Dong, China FCC test Firm Registration Number: 625569 IC test Firm Registration Number: 12108A A2LA Certificate No.: 4338.01 1.2 MEASUREMENT UNCERTAINTY The reported uncertainty of measurement y ± U, where expended uncertainty U is based on a standard uncertainty multiplied by a coverage factor of k=2, providing a level of confidence of approximately 95 %. No. Item Uncertainty 1 RF output power, conducted ±0.751dB 2 Unwanted Emissions, conducted ±2.888dB 3 All emissions, radiated 9K-30MHz ±2.48dB 4 All emissions, radiated 30M-1GHz ±2.52dB 5 All emissions, radiated 1G-18GHz ±3.48dB 6 All emissions, radiated>18GHz ±4.18dB 7 Conducted Emission (9KHz-150KHz) ±2.48dB 8 Conducted Emission (150KHz-30MHz) ±2.52dB 9 Occupied Channel Bandwidth ±3.6% 10 Power Spectral Density, conducted ±1.214dB 11 Duty Cycle ±3.2% Page 8 of 36 Report No.: STS2604425W01 2. GENERAL INFORMATION 2.1 GENERAL DESCRIPTION OF THE EUT Product Name JD-A19-9W-RC Brand Name N/A Model Name JD-A19-9W-RC Series Model(s) N/A Model Difference N/A Product Description The …

Text truncated - open the document above for the full version.

The test results presented in this report relate only to the object tested. This report shall not be reproduced, except in full, without the written approval of the Shenzhen STS Test Services Co., Ltd. Radio Test Report Report No.: STS2604425W01 Issued for Jiangsu JD Smart Electrical Appliance Co. , Ltd. 1-3 F, building a 5, new town industrial park, north of Lianyungang, China Product Name: JD-A19-9W-RC Brand Name: N/A Model Name: JD-A19-9W-RC Series Model(s): N/A FCC ID: 2BVQU-JDSMART Test Standards: FCC Part15.247 Page 2 of 37 Report No.: STS2604425W01 TEST REPORT Applicant’s Name ................. : Jiangsu JD Smart Electrical Appliance Co. , Ltd. Address ................................. : 1-3 F, building a 5, new town industrial park, north of Lianyungang, China Manufacturer's Name .......... : Jiangsu JD Smart Electrical Appliance Co. , Ltd. Address ................................. : 1-3 F, building a 5, new town industrial park, north of Lianyungang, China Product Description Product Name ....................... : JD-A19-9W-RC Brand Name .......................... : N/A Model Name .......................... : ... : JD-A19-9W-RC Series Model(s) .................... : N/A Test Standards ..................... : FCC Part15.247 Test Procedure ...................... : ANSI C63.10-2020 This device described above has been tested by STS, the test results show that the equipment under test (EUT) is in compliance with the FCC requirements. And it is applicable only to the tested sample identified in the report. The test results presented in this report relate only to the object tested. This report shall not be reproduced, except in full, without the written approval of the Shenzhen STS Test Services Co., Ltd. Date of Test ........................................... : Date of receipt of test item ..................... : 2026-04-16 Date (s) of performance of tests ............. : 2026-04-17 to 2026-05-08 Date of Issue .......................................... : 2026-05-12 Test Result.............................................. : Pass Testing Engineer : (Aaron Bu) Technical Manager : (Skylar Li) Authorized Signatory : (Bovey Yang) Page 3 of 37 Report No.: STS2604425W01 Table of Contents Page 1. SUMMARY OF TEST RESULTS 6 1.1 TEST FACTORY 7 1.2 MEASUREMENT UNCERTAINTY 7 2. GENERAL INFORMATION 8 2.1 GENERAL DESCRIPTION OF THE EUT 8 2.2 DESCRIPTION OF THE TEST MODES 9 2.3 TEST SOFTWARE AND POWER LEVEL 10 2.4 BLOCK DIAGRAM SHOWING THE CONFIGURATION OF SYSTEM TESTED 10 2.5 DESCRIPTION OF NECESSARY ACCESSORIES AND SUPPORT UNITS 11 2.6 EQUIPMENTS LIST 12 RF RADIATION TEST EQUIPMENT 12 3. EMC EMISSION TEST 13 3.1 CONDUCTED EMISSION MEASUREMENT 13 3.2 TEST PROCEDURE 14 3.3 TEST SETUP 14 3.4 EUT OPERATING CONDITIONS 14 3.5 TEST RESULTS 14 4. RADIATED EMISSION MEASUREMENT 15 4.1 RADIATED EMISSION LIMITS 15 4.2 TEST PROCEDURE 17 4.3 TEST SETUP 18 4.4 EUT OPERATING CONDITIONS 18 4.5 FIELD STRENGTH CALCULATION 19 4.6 TEST RESULTS 20 5. CONDUCTED SPURIOUS & BAND EDGE EMISSION 25 5.1 LIMIT 25 5.2 TEST PROCEDURE 25 5.3 TEST SETUP 25 5.4 EUT OPERATION CONDITIONS 25 5.5 TEST RESULTS 25 6. POWER SPECTRAL DENSITY TEST 26 6.1 LIMIT 26 6.2 TEST PROCEDURE 26 Page 4 of 37 Report No.: STS2604425W01 Table of Contents Page 6.3 TEST SETUP 26 6.4 EUT OPERATION CONDITIONS 26 6.5 TEST RESULTS 26 7. BANDWIDTH TEST 27 7.1 LIMIT 27 7.2 TEST PROCEDURE 27 7.3 TEST SETUP 27 7.4 EUT OPERATION CONDITIONS 27 7.5 TEST RESULTS 27 8. PEAK OUTPUT POWER TEST 28 8.1 LIMIT 28 8.2 TEST PROCEDURE 28 8.3 TEST SETUP 28 8.4 EUT OPERATION CONDITIONS 28 8.5 TEST RESULTS 28 9. ANTENNA REQUIREMENT 29 9.1 STANDARD REQUIREMENT 29 9.2 EUT ANTENNA 29 APPENDIX 1-TEST DATA 30 MAXIMUM CONDUCTED OUTPUT POWER 30 -6DB BANDWIDTH 31 OCCUPIED CHANNEL BANDWIDTH 32 MAXIMUM POWER SPECTRAL DENSITY LEVEL 33 BAND EDGE 34 CONDUCTED RF SPURIOUS EMISSION 36 APPENDIX 2- EUT TEST PHOTO 37 Page 5 of 37 Report No.: STS2604425W01 Revision History Rev. Issue Date Report No. Effect Page Contents 00 2026-05-12 STS2604425W01 ALL Initial Issue Page 6 of 37 Report No.: STS2604425W01 1. SUMMARY OF TEST RESULTS Test procedures according to the technical standards: KDB 558074 D01 15.247 Meas Guidance v05r02. FCC Part 15.247,Subpart C Standard Section Test Item Judgment Remark 15.207 Conducted Emission N/A -- 15.247 (a)(2) 6dB Bandwidth PASS -- 15.247 (b)(3) Output Power PASS -- 15.209 Radiated Spurious Emission PASS -- 15.247 (d) Conducted Spurious & Band Edge Emission PASS -- 15.247 (e) Power Spectral Density PASS -- 15.205 Restricted bands of operation PASS -- Part 15.247(d)/ Part 15.209(a) Band Edge Emission PASS -- 15.203 Antenna Requirement PASS -- Note: (1) ‘N/A’ denotes test is not applicable in this Test Report. (2) All tests are according to ANSI C63.10-2020. Page 7 of 37 Report No.: STS2604425W01 1.1 TEST FACTORY SHENZHEN STS TEST SERVICES CO., LTD Add. : 101, Building B, Zhuoke Science Park, No.190 Chongqing Road, ZhanChengShequ, Fuhai Sub-District, Bao’an District, Shenzhen, Guang Dong, China FCC test Firm Registration Number: 625569 IC test Firm Registration Number: 12108A A2LA Certificate No.: 4338.01 1.2 MEASUREMENT UNCERTAINTY The reported uncertainty of measurement y ± U, where expended uncertainty U is based on a standard uncertainty multiplied by a coverage factor of k=2, providing a level of confidence of approximately 95 %. No. Item Uncertainty 1 RF output power, conducted ±0.751dB 2 Unwanted Emissions, conducted ±2.888dB 3 All emissions, radiated 9K-30MHz ±2.48dB 4 All emissions, radiated 30M-1GHz ±2.52dB 5 All emissions, radiated 1G-18GHz ±3.48dB 6 All emissions, radiated>18GHz ±4.18dB 7 Conducted Emission (9KHz-150KHz) ±2.48dB 8 Conducted Emission (150KHz-30MHz) ±2.52dB 9 Occupied Channel Bandwidth ±3.6% 10 Power Spectral Density, conducted ±1.214dB 11 Duty Cycle ±3.2% Page 8 of 37 Report No.: STS2604425W01 2. GENERAL INFORMATION 2.1 GENERAL DESCRIPTION OF THE EUT Product Name JD-A19-9W-RC Brand Name N/A Model Name JD-A19-9W-RC Series Model(s) N/A Model Dif…

Text truncated - open the document above for the full version.

Page 1 of 2 FCC ID: 2BVQU-JDSMART Setup photo RE (Below 1GHz) RE (Above 1GHz) Page 2 of 2 FCC ID: 2BVQU-JDSMART RF Conducted Test