2BVRE-DIY-RGBLED Lights

User's manual III Thank you for choosing our products. Please read the instructions carefully before using this product. Its strongly recommended that you keep this user manual for reference. Indoor use only 2. Security Information •This product is not a toy. Keep out of reach of infants and children •For indoor use only •This product is for decorative purposes only and is not suitable for general household lighting •Never throw this product into fire •Do not place this product in excessively hot environments •Please dispose of this product properly according to local regulations •Do not disassemble this product •Clean the product with a dry, soft cloth only •Do not immerse the product in water •Disconnect the power supply or remove batteries before cleaning or maintenance •Store the product in a cool and dry place when not in use 3. Maintenance and upkeep 1. Product Information •Manufacturer Contact Information: [email protected] •Intended Use/Product Function: For decoration •EU Authorized Representative Name & Address ELING ITALIA S.R.L. E-mail: [email protected] ITALY Milano (MI) - Via Del Lauro 9 CAP 20121 LEXIA AVVOCATI EC REP ELINGEN LTD E-mail: [email protected] 2 Frederick Street, Kings Cross, London, WC1X 0ND, UK REP UK TTT Representative LLC E-mail: [email protected] 2450 Colorado Avenue, Suite 100E, Santa Monica, CA 90404, United States REP US REPTUR TTT REPRESENTATIVE DANISMANLIK LIMITED SIRKETI E-mail: [email protected] ESENTEPE MAH. BUYUKDERE CAD. LOFT RESIDANCE NO:201 IC KAPI NO:40 SISLI /ISTANBUL •UK Authorized Representative Name & Address •US Authorized Representative Name & Address •TUR Authorized Representative Name & Address •Manufacturer Name: Zhongshan Mingtuo Lighting Co., Ltd •Address: 9th Floor, Building 3, No. 41 Industrial Avenue Middle, Baofeng Community, Xiaolan Town, Zhongshan City, Guangdong, China •Product Name: LED Lights •Model Number: DIY-RGB 2. Align the other end of the connector with the slot on the hex block, press to lock, then assemble into your desired shape 3. Take out the LED strip, peel off the sticker on the back, and stick it along the back of the hexagonal squares one by one, as shown in the picture W ON RGB OFF Night Speed+Mode 1H 2H Speed-   1 Brightness +/- On/ Off Static Mode Timming Dynamic mode adjustment Music sync color change Scan this QR code to download the APP and control the lights. 1. Align the connector with the slot on the hexagon, press to lock, and then cut double-sided tape to place it on the connector Notice Please assemble strictly according to the drawings This product uses 2 AAA batteries for remote control, and the remote control does not come with a battery 4. Installation Instructions 4. Peel off the stickers from the double-sided tape one by one, then attach the product to your desired location •Do not dispose of discarded electronic products with household waste •Please recycle them at locations with recycling facilities •For recycling advice, please consult your local authorities or retailers 5. Recycling Instructions 6. Troubleshooting instructions problemPossible CauseSolution The light is not on Power not connected Check the power connection Remote control faulty Lights flashing Some lights faulty The battery is dead Loose connection Product damage Replacement battery Ensure all connections are secure Stop using and dispose of properly Caution: The user is cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with a minimum distance of 20cm between To maintain compliance with FCC s RF Exposure guidelines, This equipment should be installed and operated with minimum distance between 20cm the radiator and your body: Use only the supplied antenna. the radiator and your body. “Information to User”

1/1 USAgentforServiceofProcessLETTEROFATTESTATION TO: OfficeofEngineeringTechnology FederalCommunicationsCommission 7435OaklandMillsRoad Columbia,MD21046 USAgentforServiceofProcess: CompanyName:HOPEKCORPORATIONINC Address:16755CoyoteBushDrUnit84,SanDiego,CA92127UnitedStates FRN:0034562900 ContactName:PeterDavis TelephoneNo:(561)875-9826 E-mail:[email protected] ThisletteristoconfirmthattheUSAgentforServiceofProcessacceptsresponsibilitytoactas alocalrepresentativeonbehalfofZhongshanMingtuoLightingCo.,Ltd TheUSAgentforServiceofProcessisawareofandagreestocomplywiththerequirements outlinedintheFCCEquipmentAuthorizationProgram,ReportandOrderFCC22-84,andclause §2.911. Applicant: CompanyName:ZhongshanMingtuoLightingCo.,Ltd ProductDescription:LEDLights FRN:0038325502 GranteeCode:2BVRE FCCID:2BVRE-DIY-RGB ContactName:JunlinHuang Address:9thFloor,Building3,No.41IndustrialAvenueMiddle,BaofengCommunity,Xiaolan Town,ZhongshanCity,Guangdong,China TelephoneNo:15915353916 E-mail:[email protected] TheApplicantisawareofandagreestocomplywiththerequirementsoutlinedintheFCC EquipmentAuthorizationProgram,ReportandOrderFCC22-84,andclause§2.911. ThisAgreementisvaliduntil(Permanentlyvalid). Date:2026/4/27 Applicant’sName: ZhongshanMingtuoLightingCo.,Ltd USAgentforServiceofProcess’sName: HOPEKCORPORATIONINC Title:managerTitle:Manager SignatureSignature

Rev 1/26/2023 Zhongshan Mingtuo Lighting Co., Ltd Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: Apr. 21, 2026 Ref: Attestation Statements Part 2.911(d)(5)(i) Filing FCC ID: 2BVRE-DIY-RGB [Zhongshan Mingtuo Lighting Co., Ltd] certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. [Zhongshan Mingtuo Lighting Co., Ltd] certifies that the equipment for which authorization is sought does not include cybersecurity or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors and assignees, including equipment with integrated Kaspersky Lab, Inc. (or any of its successors and assignees) cybersecurity or anti-virus software pursuant to DA-24-886 and KDB 986446 D01 Covered Equipment Guidance section B(2a). Device is inherently compliant based on hardware limitations or software controls. or A Software Bill of Materials (SBOM) is provided to the TCB for review, and The end-user or third parties cannot install additional software on this device. Sincerely, (Applicant signature) (Applicant printed name) Junlin Huang Rev 1/26/2023 Zhongshan Mingtuo Lighting Co., Ltd Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: Apr. 21, 2026 Ref: Attestation Statements Part 2.911(d)(5)(ii) Filing FCC ID: 2BVRE-DIY-RGB [Zhongshan Mingtuo Lighting Co., Ltd] certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Sincerely, (Applicant signature) (Applicant printed name) Junlin Huang

Zhongshan Mingtuo Lighting Co., Ltd Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: April 27, 2026 Subject; Request for Confidentiality FCC ID: 2BVRE-DIY-RGB To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure Software Security Requirements for UNII devices In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: Junlin Huang Title: manager

Effective Date: April 2, 2020 QSF 7.6.4-8 – Agent Authorization Letter Template Page 1 of 1 Revision Date: Revision: 0 Zhongshan Mingtuo Lighting Co., Ltd Date: Apr. 21, 2026 Product Model Number: DIY-RGB To whom it may concern, Re: Product Certification Representative Authorization Letter We authorize QAI Laboratories Ltd. 3980 North Fraser Way, Burnaby B.C. Canada V5J 5K5 to act on our behalf on all matters concerning the above named equipment. This shall include the following:  Testing  Approval applications and procedures We declare that QAI Laboratories Ltd. is allowed to forward all information related to the approval project to the applied certification body and to the notification entities and to discuss any issues concerning the approval application. Any and all acts carried out by QAI Laboratories Ltd. on our behalf shall have the same effect as acts of our own. By: Contact Listed on FCC Wesbite Title: manager Email: [email protected] Telephone: 15915353916 On behalf of: Zhongshan Mingtuo Lighting Co., Ltd

Ext Photos Model: DIY-RGB Photo 1 Photo 2 Photo 3 Photo 4 Photo 5 Photo 6 Photo 7

MADE IN CHINA FCC ID: 2B Model: DIY-RGB VRE-DIY-RGB Batch Number: BJ2025 32mm 11mm

Int Photos Model: DIY-RGB Photo 1 Photo 2 Photo 3 Photo 4 ANT

- Page 1 of 9 - Report No.: HB20260416006E-02 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com RF EXPOSURE Test Report Product: LED Lights Trade Mark: N/A Model Number: DIY-RGB FCC ID: 2BVRE-DIY-RGB Prepared for Zhongshan Mingtuo Lighting Co., Ltd 9th Floor, Building 3, No. 41 Industrial Avenue Middle, Baofeng Community, Xiaolan Town, Zhongshan City, Guangdong, China Prepared by Shenzhen HongBiao Certification& Testing Co., Ltd Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen, China Tel.: +86-755-2998 9321 Fax.: +86-755-2998 5110 Website: http://www.sz-hongbiao.com - Page 2 of 9 - Report No.: HB20260416006E-02 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com Table of Contents 1 GENERAL DESCRIPTION ..................................................................................................................................... 5 1.1 DESCRIPTION OF EUT ................................................................................................................................................ 5 1.2 TEST MODE .............................................................................................................................................................. 5 1.3 TEST SETUP .............................................................................................................................................................. 5 1.4 ANCILLARY EQUIPMENT .............................................................................................................................................. 5 2 TEST FACILITIES AND ACCREDITATIONS .............................................................................................................. 6 2.1 TEST LABORATORY ..................................................................................................................................................... 6 2.2 ENVIRONMENTAL CONDITIONS ..................................................................................................................................... 6 2.3 MEASUREMENT UNCERTAINTY ..................................................................................................................................... 6 2.4 TEST SOFTWARE ........................................................................................................................................................ 6 3 LIST OF TEST EQUIPMENT .................................................................................................................................. 7 4 RF EXPOSURE..................................................................................................................................................... 8 4.1 STANDALONE SAR TEST EXCLUSION CONSIDERATIONS........................................................................................................ 8 4.1.1. Limit ............................................................................................................................................................ 8 4.1.2. Test Procedures ........................................................................................................................................... 8 4.1.3. Test Result ................................................................................................................................................... 9 - Page 3 of 9 - Report No.: HB20260416006E-02 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com TEST RESULT CERTIFICATION Applicant’s Name ................. : Zhongshan Mingtuo Lighting Co., Ltd Address ................................. : 9th Floor, Building 3, No. 41 Industrial Avenue Middle, Baofeng Community, Xiaolan Town, Zhongshan City, Guangdong, China Manufacturer's Name .......... : Zhongshan Mingtuo Lighting Co., Ltd Address ................................. : 9th Floor, Building 3, No. 41 Industrial Avenue Middle, Baofeng Community, Xiaolan Town, Zhongshan City, Guangdong, China Product description Product name ........................ : LED Lights Model Number ....................... : DIY-RGB Standards ............................. : FCC CFR 47 PART 1 , 1.1310 Test procedure ....................... : KDB 447498 D01 General RF Exposure Guidance v06 This device described above has been tested by Shenzhen HongBiao Certification& Testing Co., Ltd and the test results show that the equipment under test (EUT) is in compliance with the EMC requirements. And it is applicable only to the tested sample identified in the report. Date of Test ........................................... : Date (s) of performance of tests ............. : Apr. 16, 2026~Apr. 21, 2026 Test Result .............................................. : Pass Testing Engineer : ( Z o e Su) Technical Manager : (M i n g L i u) Authorized Signatory : (L e o S u) - Page 4 of 9 - Report No.: HB20260416006E-02 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com Revision History Revised No. Date of Issue Description 01 Apr. 21, 2026 Original - Page 5 of 9 - Report No.: HB20260416006E-02 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.c…

Text truncated - open the document above for the full version.

- Page 1 of 45 - Report No.:HB20260416006E-01 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com Test Report Product: LED Lights Trade Mark: N/A Model Number: DIY-RGB FCC ID: 2BVRE-DIY-RGB Prepared for Zhongshan Mingtuo Lighting Co., Ltd 9th Floor, Building 3, No. 41 Industrial Avenue Middle, Baofeng Community, Xiaolan Town, Zhongshan City, Guangdong, China Prepared by Shenzhen HongBiao Certification& Testing Co., Ltd Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen, China Tel.: +86-755-2998 9321 Fax.: +86-755-2998 5110 Website: http://www.sz-hongbiao.com - Page 2 of 45 - Report No.:HB20260416006E-01 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com Table of Contents 1 GENERAL DESCRIPTION ..................................................................................................................................... 6 1.1 DESCRIPTION OF EUT ................................................................................................................................................ 6 1.2 TEST MODE .............................................................................................................................................................. 6 1.3 OPERATION CHANNEL LIST ........................................................................................................................................... 7 1.4 TEST SETUP .............................................................................................................................................................. 7 1.5 POWER SETTING CONFIGURATION PARAMETERS ............................................................................................................... 7 1.6 ANCILLARY EQUIPMENT .............................................................................................................................................. 7 2 SUMMARY OF TEST RESULT ............................................................................................................................... 8 3 TEST FACILITIES AND ACCREDITATIONS .............................................................................................................. 9 3.1 TEST LABORATORY ..................................................................................................................................................... 9 3.2 ENVIRONMENTAL CONDITIONS ..................................................................................................................................... 9 3.3 MEASUREMENT UNCERTAINTY ..................................................................................................................................... 9 3.4 TEST SOFTWARE ...................................................................................................................................................... 10 4 LIST OF TEST EQUIPMENT .................................................................................................................................11 5 TEST ITEM AND RESULTS ...................................................................................................................................13 5.1 ANTENNA REQUIREMENT .......................................................................................................................................... 13 5.1.1 Standard Requirement ............................................................................................................................. 13 5.1.2 Test Result ................................................................................................................................................. 13 5.2 CONDUCTED EMISSION ............................................................................................................................................. 14 5.2.1 Limits ........................................................................................................................................................ 14 5.2.2 Test Procedures ......................................................................................................................................... 14 5.2.3 Test Setup .................................................................................................................................................. 15 5.2.4 Test Result ................................................................................................................................................. 15 5.3 RADIATED EMISSION ................................................................................................................................................ 18 5.3.1 Limits ........................................................................................................................................................ 18 5.3.2 Test Procedures ......................................................................................................................................... 18 5.3.3 Test Setup .................................................................................................................................................. 18 5.3.4 Test Result ................................................................................................................................................. 19 5.3.5 Band Edge - Radiated ............................................................................................................................... 23 5.3.6 Spurious emission in band 1000MHz-25000MHz ................................................................…

Text truncated - open the document above for the full version.

Antenna describe 1. Antenna describe: Antenna type PCB Antenna Make name/model name PDT-002 Antenna gain 0dBi Frequency range 2.4GHZ-2.483GHZ Connector type direct Laboratory Name: DONGGUANG XIAOKE INDUSTRLES.CO.,LTD Laboratory Address: NO. 227, DONGCHENG SECTION, GUANDONG ROAD, DONGCHENG STREET, DONGGUAN CITY,CHINA 2.External view drawing: Picture of antenna Antenna Dimensions L1 2.30 mm L2 1.20 mm L3 1.95 mm W1 0.35 mm W2 0.35 mm D1 1.25 mm D2 1.80 mm D3 0.50 mm 3.Antenna Radiation Pattern Radiation [email protected] Total Average Gain: - 0.475 dbi 0 45 90 135 180 235 270 315 Phi Gain - 0.2 - 0.3 - 0.8 - 0.5 - 0.2 - 0.5 - 0.8 - 0.5 Radiation [email protected] Total Average Gain: - 0.275 dbi 0 45 90 135 180 235 270 315 Phi Gain 0 - 0.2 - 0.4 - 0.6 - 0.1 - 0.3 - 0.6 - 0.4 Radiation [email protected] Total Average Gain: - 0.237 dbi 0 45 90 135 180 235 2 70 315 Phi Gain 0 - 0.2 - 0.3 - 0.5 0 - 0.3 - 0.6 - 0.2

Photographs of the Test Setup Model: DIY-RGB Radiated Emission Below 1GHz Radiated Emission Above 1GHz Conducted emission