2BVYY-C2-317-003Remote Control (handheld)

SPECIFICATIONS Voltage 12V / 24V Power Consumption 33w Raw Lumen Output 5700Lm Effective Lumen Output 2100Lm Prak beam intensity 200,000cd Prak beam distance 446m Rotatation 360° Tilt 110° Wireless range 70m Housing material PC Lens material PC IP Rating IPX6 Operating Temperatures -30 °C~ +60 °C Remote Specifications C2-317-003 C2-317-004 Voltage 3V(AAA1.5Vx2) 12V / 24V Wireless range 70m 70m Housing material ASA ASA Operating Temperatures -10 °C~ +40 °C -30 °C~ +40 °C C2-317 Remote Control LED Search Lights IMPORTANT! READ THESE INSTRUCTIONS BEFORE INSTALLING AND USING THIS PRODUCT. Introduction The spotlight uses a super bright that can illuminate objects up to 1,460 ft away. It is IP56 Weatherproof rated for extreme environments, with a UV weather resistant housing and fully enclosed tilt function driven by quiet motors that can withstand extreme temperatures (-22°F to 140°F or -30°C to 60°C). It has been designed and tested to withstand the harsh marine environments including high humidity, salt water spray, shock. Precision circuitry allows for remarkable aiming and tracking with two speed choices. OPERATION FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. FCC Caution: To ensure continued compliance, any changes or modifications not expressly approved by the party responsible for compliance may void the user's authority to operate this equipment. NOTE: This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help.

Covered list attestation FCC application letter Kiwa Page 1 of 2 RF_755_03 06-06-2024 Certification Application Attestation Statements <Company name> SHIN CHIN INDUSTRIAL CO., LTD. <FRN:> 0038390159 <adress> No. 128, Cheng Pei 1st Road, Yung Kang Dist., <ZIP / Postcode> 71042 <city> <country> Tainan City , Taiwan Subject: FCC ID: <add here> 2BVYY-C2-317-003 To Whom It May Concern: Statement for 47 CFR section 2.911(d)(5)(i) [SHIN CHIN INDUSTRIAL CO., LTD.] certifies that as of the date of the application the equipment for which authorization is sought is not “covered” equipment 1 prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. If the equipment for which the applicant seeks authorization is produced by any of the entities identified on the current Covered List, including affiliates or subsidiaries of the named companies, the applicant must include an explanation on why the equipment is not “covered” equipment. Additional Explanation: [SHIN CHIN INDUSTRIAL CO., LTD.] ("the applicant") certifies that the equipment for which authorization is sought does not include cybersecurity or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors and assignees, including equipment with integrated Kaspersky Lab, Inc. (or any of its successors and assignees) cybersecurity or anti-virus software pursuant to DA-24-886 and KDB 986446 D01 Covered Equipment Guidance section B(2a).” Statement for 47 CFR section 2.911(d)(5)(ii) [SHIN CHIN INDUSTRIAL CO., LTD.] (“the applicant”) certifies that, as of the date of the filing of this application, the applicant - is / - is not (3) identified on the Covered List as an entity producing “covered” equipment. Date: 2026/06/02 City: Tainan City Name (2) : Tom Huang Function: QA Section Chief 1 - The Commission’s Covered List is published by the Public Safety and Homeland Security Bureau and posted on the Commission’s website. This Covered List, which is periodically updated, identifies particular equipment, produced by particular entities, that constitutes “covered” equipment. https://www.fcc.gov/supplychain/coveredlist . (2): For FCC it must be the Grantee Code “owner” or the authorized agent. (3): double click on the appropriate box and select ‘’checked” then “OK” Covered list attestation FCC application letter Kiwa Page 2 of 2 RF_755_03 06-06-2024 Telephone number: 886-6-2532181 Email address: [email protected] Signature: Revision Record Sheet: Revision Section number Page number Date Remark(s) issued by 01 07-02-2023 1 st version RvM 02 1 15-02-2023 Changed Applicant to Company and added “Subject: FCC ID: “ RvdM 03 1 06-06-2024 FRN added at certification application and included [SHIN CHIN INDUSTRIAL CO., LTD.] for the statements RvdM Issued/modified by : Richard van de Meer Function : Certification assessor Revision : 03 Date : 06-06-2024 Verified by : Willem Jan Jong Function : Team Lead Date : 06-06-2024 Released by : Axel Gase Function : Manager Quality Assurance Date of release: : 06-06-2024

FCC, Request for non-disclosure Date: 18-08-2025 RF_501, Issue 12 Page 1 of 2 Company Name: SHIN CHIN INDUSTRIAL CO., LTD. Address: No. 128, Cheng Pei 1st Road, Yung Kang Dist., City: Tainan City Country: Taiwan To: Kiwa Netherlands B.V., Dept. FCC TCB Wilmersdorf 50 7327 AC Apeldoorn The Netherlands Subject: Request for confidentiality FCC ID: 2BVYY-C2-317-003 Reference number: XXXXXX Dear FCC TCB, 1. Long-Term Confidentiality Pursuant to 47 CFR Section 0.459(a) & (b), we hereby requests non-disclosure and confidential treatment of the following materials submitted in support of FCC certification application: Bill(s) of Material Block Diagrams Operational Description Schematic Diagrams Tune-up Procedure Above materials contain secrets, proprietary and technical information, which would customarily be guarded from competitors under 47 CFR, section 0.457(d)(2). Disclosure or publication or any portion of this company confidential material to other parties could cause substantial competitive harm and provide unjustified benefits for competitors. 2. Short-Term Confidentiality (STC) Pursuant to Public Notice DA 04-1705 of the Commission’s policy, in order to comply with the marketing regulations in 47 CFR §2.803 and the importation rules in 47 CFR §2.1204, applicant hereby requests Short-Term Confidential treatment of the following materials (See notes below): Internal Photos User’s Manual Test Set-up Photos External Photos Justification: Date: 2026/06/02 Name and signature of applicant: Tom Huang Notes: 1) A document or type of document can only have ONE type of confidentiality! 2) Short-Term confidentiality is in principle for 45 days from date of grant; it can be extended max 3 times (total time 180 days max.)! The planned date should state in the RF731 application form. 3) FCC must be informed when marketing begins earlier. 4) Release takes place automatically thus extension must be requested in time. Telefication does not remind you of this! 5) Request for extension or for release must be received by Kiwa NL B.V. at least 7 days before date of actual marketing or before expiration of the STC period FCC, Request for non-disclosure Date: 18-08-2025 RF_501, Issue 12 Page 2 of 2 Revision Record Sheet: Revision Section number Page number Date Remark(s) issued by 10 1 02-01-2023 History sheet added AG 11 1 & 2 23-06-2023 Corrected date and page# WJJ 12 all 18-08-2025 Kiwa logo change AG Issued/modified by : Axel Gase Function : Manager Quality Assurance Revision : 12 Date : 18-08-2025 Verified by : Willem Jan Jong Function : Team Lead Date : 18-08-2025 Released by : Axel Gase Function : Manager Quality Assurance Date of release: : 18-08-2025

RF_160_06 Declaration of Authorisation Date of issue 13-08-2025 (On manufacturer’s company letter heading) Declaration of Authorization We Name: SHIN CHIN INDUSTRIAL CO., LTD. Address: No. 128, Cheng Pei 1st Road, Yung Kang Dist., City: Tainan City. Country: Taiwan. Declare that: Name Representative of agent: Daphne Liang (1) Agent Company name: SGS Compliance Certification Services Inc. Address: No. 168, Ln. 523, Sec. 3, Zhongzheng Rd., City: Rende Dist., Tainan City, 717017, Country Taiwan is authorized to apply for Certification of the following product(s): Product description: Remote control (handheld). Type designation: C2-317-003. Trademark: SCI. Validity/ expiry date on our behalf. Date: 2026/06/02.. City: Tainan City .. Name: Tom Huang.. (2) Function: QA Section chief............................... Signature: . Notes: (1): Required for FCC application (2): For FCC it must be the Grantee Code “owner” or the authorized agent. Revision Record Sheet: Revision Section number Page number Date Remark(s) issued by 05 1 02-01-2023 History sheet added AG 06 all 13-08-2025 Kiwa logo change AG Issued/modified by : Axel Gase Function : Manager Quality Assurance Revision : 06 Date : 13-08-2025 Verified by : Willem Jan Jong Function : Team Lead Date : 13-08-2025 Released by : Axel Gase Function : Manager Quality Assurance Date of release: : 13-08-2025

Page: 44 / 50 Report No.: TMTN2605000431NR Ref. No.: Rev.: 00 10. APPENDIX 2 PHOTOGRAPHS OF EUT External Photo Model: C2-317-003 Page: 45 / 50 Report No.: TMTN2605000431NR Ref. No.: Rev.: 00

圖 號 C2-317-24_W C2-317-24AE 顏 色 白 色 灰 色 雷雕 ID 、顏色、控制器及生產序號之代碼 C2-317-003 3V DC, 0.2A 雷雕 Logo 、規格、安規 20 10 FCC ID: 2BVYY-C2-317-003

Page: 46 / 50 Report No.: TMTN2605000431NR Ref. No.: Rev.: 00 Internal Photo Page: 47 / 50 Report No.: TMTN2605000431NR Ref. No.: Rev.: 00 Page: 48 / 50 Report No.: TMTN2605000431NR Ref. No.: Rev.: 00 Page: 49 / 50 Report No.: TMTN2605000431NR Ref. No.: Rev.: 00 Page: 50 / 50 Report No.: TMTN2605000431NR Ref. No.: Rev.: 00

This document cannot be reproduced except in full, without prior written approval of the Company. 本報告未經本公司書面許可，不可部份複製。 Project No.: TM-2605000065P FCC ID: 2BVYY-C2-317-003 Page: 1 / 1 Report No.: TMWK2605002042KS Rev.: 00 According to 447498 D04 Interim General RF Exposure Guidance v01 section 2.1.2, the available maximum time-average power not exceeding 1 mW is exempt from the test. Max. Average Electric Field: 76.34 dBμV/m@3m Max. Average EIRP power: -18.89 dBm Antenna gain: -0.66 dBi. Max. Average power:-18.89-(-0.66)=-18.23 dBm Max. Tune-up power:-18 dBm=0.02 mW This product is exempt from testing because its maximum time-averaged power does not exceed 1 mW. Note: The Max. tune-up power is determined based on the average electric field strength reported in test report TMTN2605000431NR for the purpose of test exclusion.

Project No: TM-2605000065P FCC ID: 2BVYY-C2-317-003 Page: 1 / 50 Report No.: TMTN2605000431NR Rev.: 00 No. 168, Ln. 523, Sec. 3, Zhongzheng Rd., Rende Dist., Tainan City, 717017, Taiwan /台南市仁德區中正路三段523巷168號 t:(886-6) 5802-201 f:(886-6) 5802-202 www.sgs.com.tw Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 除非另有說明，此報告結果僅對測試之樣品負責，同時此樣品僅保留90天。本報告未經本公司書面許可，不可部份複製。 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of client’s instruction, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced, except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Compliance Certification Services Inc. 程智科技股份有限公司 Member of the SGS Group FCC 47 CFR PART 15 SUBPART C ANSI C63.10: 2020 TEST REPORT For Remote Control (handheld) Model: C2-317-003 Brand: SCI Test Report Number: TMTN2605000431NR Issued to SHIN CHIN INDUSTRIAL CO., LTD. No. 128, Cheng Pei 1st Rd., Yung Kang Dist., Tainan City 71042, Taiwan, R.O.C. Issued by Compliance Certification Services Inc. Tainan Lab. No. 168, Ln. 523, Sec. 3, Zhongzheng Rd., Rende Dist., Tainan Cit y, 717017, Taiwan Issued Date: July 22, 2026 Note: This report shall not be reproduced except in full, without the written approval of Compliance Certification Services Inc. This document may be altered or revised by Compliance Certification Services Inc. personnel only, and shall be noted in the revision section of the document. Page: 2 / 50 Report No.: TMTN2605000431NR Ref. No.: Rev.: 00 REVISION HISTORY Rev. Issue Date Revisions Effect Page Revised By 00 July 22, 2026 Initial Issue ALL Gina Lin Page: 3 / 50 Report No.: TMTN2605000431NR Ref. No.: Rev.: 00 TABLE OF CONTENTS 1. TEST RESULT CERTIFICATION ........................................................................ 4 2. TEST RESULT SUMMARY ................................................................................. 5 3. EUT DESCRIPTION ............................................................................................. 6 4. TEST METHODOLOGY ....................................................................................... 7 4.1 EUT CONFIGURATION ............................................................................... 7 4.2 EUT EXERCISE ........................................................................................... 7 4.3 GENERAL TEST PROCEDURES ................................................................ 7 4.4 FCC PART 15.205 RESTRICTED BANDS OF OPERATIONS .................... 8 4.5 DESCRIPTION OF TEST MODES ............................................................... 8 5. INSTRUMENT CALIBRATION ............................................................................ 9 5.1 MEASURING INSTRUMENT CALIBRATION ............................................... 9 5.2 MEASUREMENT EQUIPMENT USED ......................................................... 9 5.3 MEASUREMENT UNCERTAINTY ............................................................. 10 6. FACILITIES AND ACCREDITATIONS .............................................................. 11 6.1 FACILITIES................................................................................................. 11 6.2 EQUIPMENT .............................................................................................. 11 6.3 TABLE OF ACCREDITATIONS AND LISTINGS ........................................ 11 6.4 TABLE OF ACCREDITATIONS AND LISTINGS ........................................ 12 7. SETUP OF EQUIPMENT UNDER TEST ........................................................... 13 7.1 SETUP CONFIGURATION OF EUT ........................................................... 13 7.2 SUPPORT EQUIPMENT ............................................................................ 13 7.3 EUT OPERATING CONDITION ................................................................. 13 8. FCC PART 15.231 REQUIREMENTS ................................................................ 14 8.1 99% BANDWIDTH ...................................................................................... 14 8.2 20dB BANDWIDTH ..................................................................................... 16 8.3 LIMIT OF TRANSMISSION TIME ............................................................... 18 8.4 DUTY CYCLE ............................................................................................. 20 8.5 RADIATED EMISSIONS ............................................................................. 23 8.6 POWERLINE CONDUCTED EMISSIONS ................................................. 38 9. APPENDIX 1 PHOTOGRAPHS OF TEST SETUP ............................................ 39 10. APPENDIX 2 PHOTOGRAPHS OF EUT ........................................................... 44 Page: 4 / 50 Report No.: TMTN2605000431NR Ref. No.: Rev.: 00 1. TEST RESULT CERTIFICATION Product: Remote Control (handheld) Model: C2-317-003 Data Applies To: N/A Brand Name: SCI Applicant: SHIN CHIN INDUSTRIAL CO., LTD. No. 128, Cheng Pei 1st Rd., Yung Kang Dist., Tainan City 71042, Taiwan, R.O.C…

Text truncated - open the document above for the full version.

Specification of Antenna Model No.： C2-317-39 Antenna Type： PCB Antenna Antenna Operation Frequency：433.20~433.95MHz Length Closed： N/A Length Open： L: 24.7mm*W:7mm Diameter： N/A No. of element： N/A Antenna Gain： -0.66dBi Total Resistance： 2.52Ω Temperature： -30°C ~ 40°C Antenna Pattern：

Page: 39 / 50 Report No.: TMTN2605000431NR Ref. No.: Rev.: 00 9. APPENDIX 1 PHOTOGRAPHS OF TEST SETUP RADIATED EMISSION MEASUREMENT SETUP Below 1GHz (9kHZ-30MHz) Page: 40 / 50 Report No.: TMTN2605000431NR Ref. No.: Rev.: 00 Below 1GHz (30MHZ-1GHz) Page: 41 / 50 Report No.: TMTN2605000431NR Ref. No.: Rev.: 00 Page: 42 / 50 Report No.: TMTN2605000431NR Ref. No.: Rev.: 00 RADIATED RF MEASUREMENT SETUP Above 1GHz Page: 43 / 50 Report No.: TMTN2605000431NR Ref. No.: Rev.: 00