2BW6P-VL7-01Car Stereo

Car Stereo CarPlay wired + wireless (optional) RADIO Power Supply Voltage Max Current Consumption Max Output Power SPECIFICATION 12~14.4V DC, Negative Ground 15A 4X60W Voltaje de la fuente de alimentación Consumo de corriente máximo Potencia máxima de salida ESPECIFICACIÓN 12~14,4 V CC, tierra negativa 15A 4X60W Напряжение питания Максимальное потребление тока Максимальная выходная мощность СПЕЦИФИКАЦИЯ 12~14,4 В пост. тока, минусовая земля 15А 4X60 Вт Operation Manual ESPAÑOL Русский ENGLISH FRANÇAIS DEUTSCH ITALIANO Tension d'alimentation Consommation de courant maximale Puissance de sortie maximale SPÉCIFICATION 12 ~ 14,4 V CC, masse négative 15A 4X60W Stromversorgungsspannung Maximaler Stromverbrauch Maximale Ausgangsleistung SPEZIFIKATION 12~14,4 V DC, negative Masse 15A 4X60W Tensione di alimentazione Massimo consumo di corrente Potenza di uscita massima SPECIFICA 12~14,4 V CC, terra negativa 15A 4X60W Ver.20250621 Car Stereo CarPlay wired + wireless (optional) 1605. Model: VL7-01 REAR INTERFACE DESCRIPTIONREAR INTERFACE DESCRIPTION * The yellow line B+ keeps the power on and the machine has a memory function. * 8 speaker cables, each cable can not be grounded, can not be shared, can not touch the line, otherwise there will be no sound output, output sound distortion, machine fever and so on. * When the yellow line B+ and the red line ACC have a 12V positive power at the same time, the unit can be turned on normally. 1 2 FUSE Video Output 1 External microphone Left Audio Output Right Audio Output CVBS Input Radio Antenna Reversing Video Input Video Output 2 USB Port (Only some model has) ENGLISHENGLISH L-OUT R-OUT V-OUT1 V-OUT2 CVBSIN CAMINANT MIC IN If the camera is not installed, please do not connect the REVERSE/BACK cable to any place. otherwise the machine will automatically enter the reverse mode, which will cause the machine to fail. Reverse Video Input pink Red (Reverse) Red Black Red Rear view camera Connected This part is installed at the rear of the car. B (GND) Reverse light REVERSING CAMERA INSTALLATION METHOD CAMIN A B LEARNING STEERING WHEEL CONTROLS KEY(Brown) B GND(Black) Source Reset Confirm Example: Press and hold a button on the steering wheel of the original car and find the button icon corresponding to the function of the button on the steering wheel. Click the icon to change the color, learning is successful. Red Black Blue Green Brown Yellow Pink Orange Ignition Switch +12V Ground wire B- Radio Antenna Illuminate B Steering wheel control Power Supply +12V Reversing camera Parking brake cable + - ACC GND ANT ILLUMINATION KEY BATTERY REVERSE BRAKE Green Green/black striped White White/black striped Gray Gray/black striped Purple Purple/black striped Front speaker Front speaker Rear speaker Rear speaker A 3 4 Apple CarPlay wired , wireless(optional) Android Auto wired , wireless(optional) This feature is not supported in all countries, and “Google Play” services need to be available locally. 2. A mobile phone with Android 6.0 or higher must be used. Must use a valid data cable connection. 4. First turn on the Bluetooth and wifi functions of the mobile phone, Wireless connection: and then connect the Bluetooth. Then it will automatically enter the Android Auto interface. (Note: The signal is transmitted through wifi at this time, so even if the Bluetooth function is turned off, it will be transmitted normally. When the wifi function is turned off, Android Auto will be disconnected.) 1. Need to download and install “Android Auto” software in “Google Play”. 3. Wired connection: Just connect the USB data cable, and then it will automatically enter the Android Auto interface. 2. Wireless connection: first turn on the bluetooth and wifi functions of the mobile phone, and then connect the bluetooth. Then it will automatically enter the CarPlay interface. (Note: The signal is transmitted through wifi at this time, so even if the Bluetooth function is turned off, it will be transmitted normally. When the wifi function is turned off, CarPlay will be disconnected.) 1. Wired connection: Just connect the USB data cable, and then it will automatically enter the CarPlay interface. ENGLISHENGLISH PHONELINK FUNCTION 1 2 3 4 56 3. When connecting to an Android phone, click to enter the Android auto interface. 1. When connected to an iPhone, click to enter the CarPlay interface. 2. When connected to an iPhone, click to enter mirroring mode. 5. Select the default mode when connecting to an Apple phone. 6. Select the default mode when connecting to an Android phone. 4. When connected to an Android phone, click to enter mirroring mode. BLUETOOTH CONNECTION XXXX XXXX XXXX 1 2 3 4 56 1 2 3 1 2 XXXX XXXX 3. “XXXX” is the name of the successfully paired mobile phone. 1. “XXXX” is Bluetooth name. 2. “XXXX” is Pairing password. UI1 UI2 (Some models)(Some models) UI1 UI2 (Some models)(Some models) 5 6 SPECIFICATION REMOTE CONTROL FUNCTION MUTE MODE MENU VOL+ VOL- ENT 123 456 789 0 1 2 3 4 5 6 7 8 9 12 11 10 1. Mute On/off 2. Mode: Switch mode 3. Power On/off 4. Volume + 5. Enter; Play / Pause 6. Next Track 7. Volume - 8. End Call 9. Number Button 10. Menu 11. Previous Track 12. Answer Call NOTE: 2. If the remote control does not work, please remove the batteries, wipe them and then put them back. Generally, it can be used normally. If it still does not work, it may be that the remote control battery is low. Please replace the remote control battery. 1. Before using the remote control, please install two AAA batteries. ENGLISHENGLISH Power Supply Voltage Max Current Consumption Max Output Power System setup password 12~14.4V DC, Negative Ground 15A 4X60W “113266" When the device is plugged into the iPhone, the content of the phone screen will be projected onto the car screen. iPHONE Mirrorlink NO Touch input Android Mirrorlink When using an Android device, after connecting the USB data cable, you will be prompted to install the APP software. After installation, Plug the data cable again, it…

Text truncated - open the document above for the full version.

ShenzhenTenglinElectronicsCo.,Ltd. CoveredEquipmentCertificationAttestationLetter 7/20/2026 FederalCommunicationsCommission AuthorizationandEvaluationDivision 7435OaklandMillsRoad Columbia,MD21046 USA ATTN.:ReviewingEngineer FCCID:2BW6P-VL7-01 ShenzhenTenglinElectronicsCo.,Ltd.(“theapplicant”)certifiesthattheequipmentfor whichauthorizationissoughtisnot“covered”equipmentprohibitedfromreceivingan equipmentauthorizationpursuanttosection2.903oftheFCCrules. Note:Iftheequipmentforwhichtheapplicantseeksauthorizationisproducedbyanyof theentitiesidentifiedonthecurrentCoveredList,theapplicantshouldincludean explanationonwhytheequipmentisnot“covered”equipment. ShenzhenTenglinElectronicsCo.,Ltd.(“theapplicant”)certifiesthat,asofthedateof thefilingoftheapplication,theapplicantisnotidentifiedontheCoveredList(asa specificallynamedentityoranyofitssubsidiariesoraffiliates)asanentityproducing “covered”equipment. ShenzhenTenglinElectronicsCo.,Ltd.(“theapplicant”)certifiesthattheequipmentfor whichauthorizationissoughtdoesnotincludecybersecurityoranti-virussoftware producedorprovidedbyKasperskyLab,Inc.oranyofitssuccessorsandassignees, includingequipmentwithintegratedKasperskyLab,Inc.(oranyofitssuccessorsand assignees)cybersecurityoranti-virussoftwarepursuanttoDA-24-886andKDB986446 D01CoveredEquipmentGuidancesectionB(2a). Signed: Printedname:FanYe Title:Manager CompanyName:ShenzhenTenglinElectronicsCo.,Ltd. Date:7/20/2026

ShenzhenTenglinElectronicsCo.,Ltd. FederalCommunicationsCommission AuthorizationandEvaluationDivision EquipmentAuthorizationBranch 7435OaklandMillsRoad Columbia,MD21046 [2026.07.20] U.S.AgentDesignation [ShenzhenTenglinElectronicsCo.,Ltd.]acknowledgestheirconsentforthefollowingcontactlocatedinthe UnitedStatestoactastheiragentforserviceofprocessfortheequipmentforwhichauthorizationissought(FCC ID:2BW6P-VL7-01): NameandcompanyofU.S.agent:[GLOCERTSTECHNOLOGYINC] PhysicalU.S.addressofagent:[19784SUNKISSEDRIDGEDR,RIVERSIDE,CA92507] FRNofU.S.agent:[0036339737] EmailaddressofU.S.agent:[[email protected]] TelephoneofU.S.agent:(626)588-8039 [GLOCERTSTECHNOLOGYINC]acknowledgestheirobligationtoacceptserviceofprocessonbehalfof [ShenzhenTenglinElectronicsCo.,Ltd.]. [ShenzhenTenglinElectronicsCo.,Ltd.]withtheFRN[0038666236]acceptsitsobligationtomaintainanagent forserviceofprocessintheUnitedStatesfornolessthan1yearaftereitherthegranteehaspermanently terminatedallmarketingandimportationoftheapplicableequipmentwithintheU.S.,ortheconclusionofany Commission-relatedadministrativeorjudicialproceedinginvolvingtheequipment,whicheverislater. Bysigningthisform,weconfirmtheaboveandthatweareawareoftheapplicationrequirementslistedunder§ 2.911(d)(7). TheinformationprovidedinthisletterisbasedonthereferencedrulepartsofTitle47oftheCFRaswellasKDB 986446D01. Sincerely, SignatureSignature [FanYe][HuiyingFan] [Manager][Director] [ShenzhenTenglinElectronicsCo.,Ltd.][GLOCERTSTECHNOLOGYINC]

ShenzhenTenglinElectronicsCo.,Ltd. Date:2026-07-20 FederalCommunicationsCommission Authorization&EvaluationDivision 7345OaklandMillsRoad Columbia,Maryland21046 RE:LETTEROFAGENTAUTHORIZATION FCCID:2BW6P-VL7-01 ToWhomItMayConcern: We,theundersigned,herebyauthorizeComplianceTesting,LLCtoactonourbehalfinallmatters relatingtoapplicationforequipmentauthorization,includingthesigningofalldocumentsrelatingto thesematters. Wealsoherebycertifythatnopartytotheapplicationauthorizedhereunderissubjecttothedenialof benefits,includingFCCbenefits,pursuanttoSection5301oftheAnti-DrugAbuseActof1988,21 U.S.C.853(a). Signature PrintedName:FanYe Company:ShenzhenTenglinElectronicsCo.,Ltd. JobTitle:Manager Email:[email protected] Telephone:13266768928

ShenzhenTenglinElectronicsCo.,Ltd. RequestforLong-TermConfidentialityLetter-FCC Date:2026-07-20 FederalCommunicationsCommission AuthorizationandEvaluationDivision 7435OaklandMillsRoad Columbia,Maryland21046 Re:RequestforLong-Termconfidentiality FCCID:2BW6P-VL7-01 Towhomitmayconcern, Weherebyrespectfullyrequestthatundertheprovisionof47CFR0.459and0.457(d)the documentslistedbelowandattachedwiththisapplicationforcertificationbeprovidedwithLong- Termconfidentialstatus.  Schematics OperationalDescription FrequencyBlockDiagrams SOFTWARESECURITYREQUIREMENTSFORU-NIIDEVICES Anyexhibit/informationforwhichwehaverequestedconfidentiality,butwhichmaynotbe accordedsuchtreatmentbytheFCC,shouldbereturnedtous. Thedocumentslistedabovecontaintradesecretsthataretreatedasconfidentialbyus. Substantialcompetitiveharmtouscouldresultshouldtheybemadeavailabletothepublic. Sincerelyyours, Signature PrintedName:FanYe Company:ShenzhenTenglinElectronicsCo.,Ltd. JobTitle:Manager Email:[email protected] Telephone:13266768928

ReportNo.:BKC26063631FE-7 ExternalPhotos Model:VL7-01 ReportNo.:BKC26063631FE-7 ReportNo.:BKC26063631FE-7 ReportNo.:BKC26063631FE-7

FCCID:2BW6P-VL7-01 1.5CM 0.5CM

ReportNo.:BKC26063631FE-8 InternalPhotos Model:VL7-01 ReportNo.:BKC26063631FE-8 ReportNo.:BKC26063631FE-8 ReportNo.:BKC26063631FE-8 ReportNo.:BKC26063631FE-8 ReportNo.:BKC26063631FE-8 ReportNo.:BKC26063631FE-8 ReportNo.:BKC26063631FE-8 ※※※※※ENDOFREPORT※※※※※

FCCID:2BW6P-VL7-01 RFExposureEvaluation AccordingtoKDB447498D01GeneralRFExposureGuidancev06andpart2.1091，Unlessspecifically requiredbythepublishedRFexposureKDBprocedures,standalone1-gheadorbodyand10-gextremity SARevaluationforgeneralpopulationexposureconditions,bymeasurementornumericalsimulation,isnot requiredwhenthecorrespondingSARTestExclusionThresholdcondition(s),listedbelow,is(are)satisfied. Limits Thecriterialistedinthefollowingtableshallbeusedtoevaluatetheenvironmentimpactofhumanexposure toradiofrequency(RF)radiationasspecifiedin1.1307(b) LimitsforMaximumPermissibleExposure(MPE) Frequencyrange (MHz) Electricfield strength (V/m) Magneticfieldstrength (A/m) Powerdensity (mW/cm 2 ) Averagingtime (minutes) (A)LimitsforOccupational/ControlledExposures 0.3–3.06141.63*(100)6 3.0–301842/f4.89/f*(900/f 2 )6 30–30061.40.1631.06 300–1500f/3006 1500–100,00056 (B)LimitsforGeneralPopulation/UncontrolledExposure 0.3–1.346141.63*(100)30 1.34–30824/f2.19/f*(180/f 2 )30 30–30027.50.0730.230 300–1500f/150030 1500–100,0001.030 f=frequencyinMHz Friistransmissionformula:Pd=(Pout*G)/(4*pi*r 2 ) Where Pd=powerdensityinmW/cm 2 ,Pout=outputpowertoantennainmW; G=gainofantennainlinearscale,Pi=3.1416; R=distancebetweenobservationpointandcenteroftheradiatorincm PdidthelimitofMPE,1mW/cm 2 .Ifweknowthemaximumgainoftheantennaandthetotalpowerinputto theantenna,throughthecalculation,wewillknowthedistancerwheretheMPElimitisreached. TestProcedure SoftwareprovidedbyclientenabledtheEUTtotransmitandreceivedataatlowest,middleandhighest channelindividually. TestResultofRFExposureEvaluation Mode Frequency (MHz) Antenna Gain (dBi) Antenna Gain (numeric) Max conducted power Output power to antenna (mW) Power Densityat R=20cm (mW/cm 2 ) Limit (mW/cm 2 ) Result BT240201.0002.451.760.000351PASS BLE240201.0001.111.290.000261PASS 2.4GWIFI24121.421.38711.6814.720.004061PASS 5GWIFI U-NII-1 51901.441.39310.8612.190.003381PASS 5GWIFI U-NII-3 58251.441.39313.3821.780.006041PASS Remark: 1.BT&BLEantennagain=0dBi 2.2.4GWIFIantennagain=1.42dBi 3.5GWIFIantennagain=1.44dBi. 4.BT&BLEcantransmitsimultaneouslywith2.4GWiFiand5GWiFi: 0.00035/1+0.00026/1+0.00406/1+0.00338/1+0.00604/1=0.01409<1.

Report ShenzhenTenglinElectronicsCo.,Ltd. Model:VL7-01 FCCID:2BW6P-VL7-01 1.DutyCycle ConditionModeFrequency(MHz)AntennaDutyCycle(%)CorrectionFactor(dB)1/T(kHz) NVNTb2412Ant110000 NVNTb2437Ant110000 NVNTb2462Ant110000 NVNTg2412Ant110000 NVNTg2437Ant110000 NVNTg2462Ant110000 NVNTn202412Ant110000 NVNTn202437Ant110000 NVNTn202462Ant110000 NVNTn402422Ant110000 NVNTn402437Ant110000 NVNTn402452Ant110000 Report DutyCycleNVNTb2412MHzAnt1 DutyCycleNVNTb2437MHzAnt1 Report DutyCycleNVNTb2462MHzAnt1 DutyCycleNVNTg2412MHzAnt1 Report DutyCycleNVNTg2437MHzAnt1 DutyCycleNVNTg2462MHzAnt1 Report DutyCycleNVNTn202412MHzAnt1 DutyCycleNVNTn202437MHzAnt1 Report DutyCycleNVNTn202462MHzAnt1 DutyCycleNVNTn402422MHzAnt1 Report DutyCycleNVNTn402437MHzAnt1 DutyCycleNVNTn402452MHzAnt1 Report 2.MaximumAverageConductedOutputPower ConditionModeFrequency (MHz) AntennaConductedPower (dBm) DutyFactor (dB) TotalPower (dBm) Limit (dBm) Verdict NVNTb2412Ant111.50011.5030Pass NVNTb2437Ant111.15011.1530Pass NVNTb2462Ant110.69010.6930Pass NVNTg2412Ant111.68011.6830Pass NVNTg2437Ant111.16011.1630Pass NVNTg2462Ant110.74010.7430Pass NVNTn202412Ant111.22011.2230Pass NVNTn202437Ant111.12011.1230Pass NVNTn202462Ant110.69010.6930Pass NVNTn402422Ant111.21011.2130Pass NVNTn402437Ant111.12011.1230Pass NVNTn402452Ant110.97010.9730Pass Report AveragePowerNVNTb2412MHzAnt1 AveragePowerNVNTb2437MHzAnt1 Report AveragePowerNVNTb2462MHzAnt1 AveragePowerNVNTg2412MHzAnt1 Report AveragePowerNVNTg2437MHzAnt1 AveragePowerNVNTg2462MHzAnt1 Report AveragePowerNVNTn202412MHzAnt1 AveragePowerNVNTn202437MHzAnt1 Report AveragePowerNVNTn202462MHzAnt1 AveragePowerNVNTn402422MHzAnt1 Report AveragePowerNVNTn402437MHzAnt1 AveragePowerNVNTn402452MHzAnt1 Report 3.-6dBBandwidth ConditionModeFrequency(MHz)Antenna-6dBBandwidth(MHz)Limit-6dBBandwidth(MHz)Verdict NVNTb2412Ant110.160.5Pass NVNTb2437Ant110.150.5Pass NVNTb2462Ant110.150.5Pass NVNTg2412Ant116.400.5Pass NVNTg2437Ant116.460.5Pass NVNTg2462Ant116.400.5Pass NVNTn202412Ant117.600.5Pass NVNTn202437Ant117.640.5Pass NVNTn202462Ant117.640.5Pass NVNTn402422Ant136.180.5Pass NVNTn402437Ant136.250.5Pass NVNTn402452Ant136.280.5Pass Report -6dBBandwidthNVNTb2412MHzAnt1 -6dBBandwidthNVNTb2437MHzAnt1 Report -6dBBandwidthNVNTb2462MHzAnt1 -6dBBandwidthNVNTg2412MHzAnt1 Report -6dBBandwidthNVNTg2437MHzAnt1 -6dBBandwidthNVNTg2462MHzAnt1 Report -6dBBandwidthNVNTn202412MHzAnt1 -6dBBandwidthNVNTn202437MHzAnt1 Report -6dBBandwidthNVNTn202462MHzAnt1 -6dBBandwidthNVNTn402422MHzAnt1 Report -6dBBandwidthNVNTn402437MHzAnt1 -6dBBandwidthNVNTn402452MHzAnt1 Report 4.OccupiedChannelBandwidth ConditionModeFrequency(MHz)Antenna99%OBW(MHz) NVNTb2412Ant115.027 NVNTb2437Ant115.015 NVNTb2462Ant115.037 NVNTg2412Ant116.549 NVNTg2437Ant116.582 NVNTg2462Ant116.555 NVNTn202412Ant117.705 NVNTn202437Ant117.696 NVNTn202462Ant117.718 NVNTn402422Ant136.254 NVNTn402437Ant136.254 NVNTn402452Ant136.226 Report OBWNVNTb2412MHzAnt1 OBWNVNTb2437MHzAnt1 Report OBWNVNTb2462MHzAnt1 OBWNVNTg2412MHzAnt1 Report OBWNVNTg2437MHzAnt1 OBWNVNTg2462MHzAnt1 Report OBWNVNTn202412MHzAnt1 OBWNVNTn202437MHzAnt1 Report OBWNVNTn202462MHzAnt1 OBWNVNTn402422MHzAnt1 Report OBWNVNTn402437MHzAnt1 OBWNVNTn402452MHzAnt1 Report 5.MaximumPowerSpectralDensityLevel ConditionModeFrequency (MHz) AntennaConductedPSD (dBm/100kHz) DutyFactor (dB) TotalPSD (dBm/100kHz) Limit (dBm/3kHz) Verdict NVNTb2412Ant1-6.110-6.118Pass NVNTb2437Ant1-6.430-6.438Pass NVNTb2462Ant1-7.010-7.018Pass NVNTg2412Ant1-7.850-7.858Pass NVNTg2437Ant1-8.740-8.748Pass NVNTg2462Ant1-8.870-8.878Pass NVNTn202412Ant1-8.890-8.898Pass NVNTn202437Ant1-9.120-9.128Pass NVNTn202462Ant1-9.680-9.688Pass NVNTn402422Ant1-12.130-12.138Pass NVNTn402437Ant1-11.860-11.868Pass NVNTn402452Ant1-12.240-12.248Pass Report PSDNVNTb2412MHzAnt1 PSDNVNTb2437MHzAnt1 Report PSDNVNTb2462MHzAnt1 PSDNVNTg2412MHzAnt1 Report PSDNVNTg2437MHzAnt1 PSDNVNTg2462MHzAnt1 Report PSDNVNTn202412MHzAnt1 PSDNVNTn202437MHzAnt1 Report PSDNVNTn202462MHzAnt1 PSDNVNTn402422MHzAnt1 Report PSDNVNTn402437MHzAnt1 PSDNVNTn402452MHzAnt1 Report 6.BandEdge ConditionModeFrequency(MHz)AntennaMaxValue(dBc)Limit(dBc)Verdict NVNTb2412Ant1-43.06-30Pass NVNTb2462Ant1-56.52-30Pass NVNTg2412Ant1-37.13-30Pass NVNTg2462Ant1-51.37-30Pass NVNTn202412Ant1-37.17-30Pass NVNTn202462Ant1-50.15-30Pass NVNTn402422Ant1-36.49-30Pass NVNTn402452Ant1-43.92-30Pass Report BandEdgeNVNTb2412MHzAnt1Ref BandEdgeNVNTb2412MHzAnt1Emission Report BandEdgeNVNTb2462MHzAnt1Ref BandEdgeNVNTb2462MHzAnt1Emission Report BandEdgeNVNTg2412MHzAnt1Ref BandEdgeNVNTg2412MHzAnt1Emission Report BandEdgeNVNTg2462MHzAnt1Ref BandEdgeNVNTg2462MHzAnt1Emission Report BandEdgeNVNTn202412MHzAnt1Ref BandEdgeNVNTn202412MHzAnt1Emission Report BandEdgeNVNTn202462MHzAnt1Ref BandEdgeNVNTn202462MHzAnt1Emission Report BandEdgeNVNTn402422MHzAnt1Ref BandEdgeNVNTn402422MHzAnt1Emission Report BandEdgeNVNTn402452MHzAnt1Ref BandEdgeNVNTn402452MHzAnt1Emission Report 7.ConductedRFSpuriousEmission ConditionModeFrequency(MHz)AntennaMaxValue(dBc)Limit(dBc)Verdict NVNTb2412Ant1-43.51-30Pass NVNTb2437Ant1-43.56-30Pass NVNTb2462Ant1-43.56-30Pass NVNTg2412Ant1-39.71-30Pass NVNTg2437Ant1-39.77-30Pass NVNTg2462Ant1-38.41-30Pass NVNTn202412Ant1-38.77-30Pass NVNTn202437Ant1-39.74-30Pass NVNTn202462Ant1-37.25-30Pass NVNTn402422Ant1-36.56-30Pass NVNTn402437Ant1-35.99-30Pass NVNTn402452Ant1-36.32-30Pass Report Tx.SpuriousNVNTb2412MHzAnt1Ref Tx.SpuriousNVNTb2412MHzAnt1Emission Report Tx.SpuriousNVNTb2437MHzAnt1Ref Tx.SpuriousNVNTb2437MHzAnt1Emission Report Tx.SpuriousNVNTb2462MHzAnt1Ref Tx.SpuriousNVNTb2462MHzAnt1Emission Report Tx.SpuriousNVNTg2412MHzAnt1Ref Tx.SpuriousNVNTg2412MHzAnt1Emission Report Tx.SpuriousNVNTg2437MHzAnt1Ref Tx.SpuriousNVNTg2437MHzAnt1Emission

ShenzhenBKCTestingCo.,Ltd.ReportNo.:BKC26063631FE-3 TestReportTel:4000-875-3820755-84829082Web:Http://www.bkc-lab.comPage1of28 TESTREPORT Applicant:ShenzhenTenglinElectronicsCo.,Ltd. Address: 2F,RoomB061,BaoluAutoPartsCenter,195Chuangye2ndRd, Xin’an,Bao’an,Shenzhen,China Manufacturer:DongguanHangyiElectronicTechnologyCo.,Ltd. Address: Room02,4/F,BuildingF,No.170JinxiaotangHuancunRoad, ZhutangVillage,FenggangTown,Dongguan,Guangdong,China. ProductName:CarStereo ModelNumber:VL7-01 Trademark:orelvixo FCCID:2BW6P-VL7-01 TestDate: Jun.29,2026-Jul.10,2026 DateofReport: Jul.20,2026 TestResult: ThisdevicedescribedabovehasbeentestedbyBKC,andthetest resultsshowthattheequipmentundertest(EUT)isincompliance withtheStandardrequirements.Anditisapplicableonlytothetested sampleidentifiedinthereport. TestProcedureUsed: Standards:FCCCFRTitle47Part15SubpartCSection15.247 ANSI C63.10-2020+Cor.1-2023 Preparedby(TestEngineer): CareyZheng Reviewer(Supervisor): CaseyWang Approved(Manager): JerryLiao ShenzhenBKCTestingCo.,Ltd.ReportNo.:BKC26063631FE-3 TestReportTel:4000-875-3820755-84829082Web:Http://www.bkc-lab.comPage2of28 TABLEOFCONTENT 1.GeneralInformation......................................................................................5 1.1.Customerbasicinformation........................................................................................................................5 1.2.DescriptionofDevice(EUT).......................................................................................................................5 1.3.ChannelList..................................................................................................................................................5 1.4.Summaryoftestresult................................................................................................................................6 1.5.SpecialAccessoriesandAuxiliaryEquipment........................................................................................6 1.6.Testmode......................................................................................................................................................6 1.7.BlockDiagram...............................................................................................................................................7 1.8.Testconfiguration.........................................................................................................................................7 1.9.TestConditions.............................................................................................................................................7 1.10.MeasurementUncertainty(95%confidencelevels,k=2)....................................................................7 1.11.TestFacility..................................................................................................................................................8 1.12.TestEquipment...........................................................................................................................................9 2.Conductedemissionatthemainsterminalstest....................................10 2.1.Limit..............................................................................................................................................................10 2.2.TestSetup....................................................................................................................................................10 2.3.TestProcedure............................................................................................................................................10 2.4.TestResult...................................................................................................................................................10 3.RadiatedSpuriousEmissions...................................................................11 3.1.TestProcedure............................................................................................................................................11 3.2.Limit..............................................................................................................................................................12 3.3.TestSetup....................................................................................................................................................13 3.4.TestResult...................................................................................................................................................15 4.ConductedSpuriousEmissions................................................................20 4.1.Limit..............................................................................................................................................................20 4.2.TestSetup....................................................................................................................................................20 4.3.TestProcedure............................................................................................................................................20 4.4.TestResult...................................................................................................................................................20 5.BandEdgeMeasurement...........................................................................21 5.1.Limit..............................................................................................................................................................21 5.2.Testsetup....................................................................................................................................................21 5.3.TestProcedure............................................................................................................................................21 5.4.TestResult...................................................................…

Text truncated - open the document above for the full version.

Report ShenzhenTenglinElectronicsCo.,Ltd. Model:VL7-01 FCCID:2BW6P-VL7-01 1.MaximumPeakConductedOutputPower ConditionModeFrequency(MHz)AntennaConductedPower(dBm)TotalPower(dBm)Limit(dBm)Verdict NVNTBLE1M2402Ant11.111.1130Pass NVNTBLE1M2440Ant10.160.1630Pass NVNTBLE1M2480Ant1-1.41-1.4130Pass Report PeakPowerNVNTBLE1M2402MHzAnt1 PeakPowerNVNTBLE1M2440MHzAnt1 Report PeakPowerNVNTBLE1M2480MHzAnt1 Report 2.-6dBBandwidth ConditionModeFrequency(MHz)Antenna-6dBBandwidth(MHz)Limit-6dBBandwidth(MHz)Verdict NVNTBLE1M2402Ant10.6480.5Pass NVNTBLE1M2440Ant10.6510.5Pass NVNTBLE1M2480Ant10.6490.5Pass Report -6dBBandwidthNVNTBLE1M2402MHzAnt1 -6dBBandwidthNVNTBLE1M2440MHzAnt1 Report -6dBBandwidthNVNTBLE1M2480MHzAnt1 Report 3.OccupiedChannelBandwidth ConditionModeFrequency(MHz)Antenna99%OBW(MHz) NVNTBLE1M2402Ant11.009 NVNTBLE1M2440Ant11.010 NVNTBLE1M2480Ant11.012 Report OBWNVNTBLE1M2402MHzAnt1 OBWNVNTBLE1M2440MHzAnt1 Report OBWNVNTBLE1M2480MHzAnt1 Report 4.MaximumPowerSpectralDensityLevel ConditionModeFrequency (MHz) AntennaConductedPSD (dBm/3kHz) TotalPSD (dBm/3kHz) Limit (dBm/3kHz) Verdict NVNTBLE1M2402Ant1-14.71-14.718Pass NVNTBLE1M2440Ant1-15.52-15.528Pass NVNTBLE1M2480Ant1-17-178Pass Report PSDNVNTBLE1M2402MHzAnt1 PSDNVNTBLE1M2440MHzAnt1 Report PSDNVNTBLE1M2480MHzAnt1 Report 5.BandEdge ConditionModeFrequency(MHz)AntennaMaxValue(dBc)Limit(dBc)Verdict NVNTBLE1M2402Ant1-46.55-20Pass NVNTBLE1M2480Ant1-53.8-20Pass Report BandEdgeNVNTBLE1M2402MHzAnt1Ref BandEdgeNVNTBLE1M2402MHzAnt1Emission Report BandEdgeNVNTBLE1M2480MHzAnt1Ref BandEdgeNVNTBLE1M2480MHzAnt1Emission Report 6.ConductedRFSpuriousEmission ConditionModeFrequency(MHz)AntennaMaxValue(dBc)Limit(dBc)Verdict NVNTBLE1M2402Ant1-34.26-20Pass NVNTBLE1M2440Ant1-29.51-20Pass NVNTBLE1M2480Ant1-30.09-20Pass Report Tx.SpuriousNVNTBLE1M2402MHzAnt1Ref Tx.SpuriousNVNTBLE1M2402MHzAnt1Emission Report Tx.SpuriousNVNTBLE1M2440MHzAnt1Ref Tx.SpuriousNVNTBLE1M2440MHzAnt1Emission Report Tx.SpuriousNVNTBLE1M2480MHzAnt1Ref Tx.SpuriousNVNTBLE1M2480MHzAnt1Emission

ShenzhenBKCTestingCo.,Ltd.ReportNo.:BKC26063631FE-2 TestReportTel:4000-875-3820755-84829082Web:Http://www.bkc-lab.comPage1of30 TESTREPORT Applicant:ShenzhenTenglinElectronicsCo.,Ltd. Address: 2F,RoomB061,BaoluAutoPartsCenter,195Chuangye2ndRd, Xin’an,Bao’an,Shenzhen,China Manufacturer:DongguanHangyiElectronicTechnologyCo.,Ltd. Address: Room02,4/F,BuildingF,No.170JinxiaotangHuancunRoad, ZhutangVillage,FenggangTown,Dongguan,Guangdong,China. ProductName:CarStereo ModelNumber:VL7-01 Trademark:orelvixo FCCID:2BW6P-VL7-01 TestDate: Jun.29,2026-Jul.10,2026 DateofReport: Jul.20,2026 TestResult: ThisdevicedescribedabovehasbeentestedbyBKC,andthetest resultsshowthattheequipmentundertest(EUT)isincompliance withtheStandardrequirements.Anditisapplicableonlytothetested sampleidentifiedinthereport. TestProcedureUsed: Standards:FCCCFRTitle47Part15SubpartCSection15.247 ANSI C63.10-2020+Cor.1-2023 Preparedby(TestEngineer): CareyZheng Approved(Manager): CaseyWang Approved(Manager): JerryLiao ShenzhenBKCTestingCo.,Ltd.ReportNo.:BKC26063631FE-2 TestReportTel:4000-875-3820755-84829082Web:Http://www.bkc-lab.comPage2of30 TABLEOFCONTENT 1.GeneralInformation......................................................................................5 1.1.Customerbasicinformation........................................................................................................................5 1.2.DescriptionofDevice(EUT).......................................................................................................................5 1.3.ChannelList..................................................................................................................................................5 1.4.Summaryoftestresult................................................................................................................................6 1.5.SpecialAccessoriesandAuxiliaryEquipment........................................................................................6 1.6.Testconfiguration.........................................................................................................................................6 1.7.Testmode......................................................................................................................................................6 1.8.BlockDiagram...............................................................................................................................................7 1.9.TestConditions.............................................................................................................................................7 1.10.MeasurementUncertainty(95%confidencelevels,k=2)....................................................................7 1.11.TestFacility..................................................................................................................................................8 1.12.TestEquipment.........................................................................................................................…

Text truncated - open the document above for the full version.