2BW7J-FZ1212Fuzozo,FuzozoTAMI-US,FuzozoWUWA-US,FuzozoPOLU-US,FuzozoFIFI-US,FuzozoMUKU-US

Fuzozo User Manual www.fuzozo.net Name: Address: Email: Phone Number (with country code): S/N : Place of Purchase: Date of Purchase: Manufacturer: Robopoet Technology Hong Kong Limited Website: www.fuzozo.net WARRANTY CARD User InformationProduct Information Email: [email protected] PACKAGE CONTENTS Fuzozo Lanyard User Manual Charging Cable x1x1 x1 x1 x1 x1 Fuzozo Nurture Guide x1x1 User Manual Fuzozo Stickers Fur Brush Fuzozo Stickers Fuzozo Nurture Guide Identity Card INSTRUCTIONS Note: Once the product is connected to the network and a digital life has been activated, the 7-day unconditional return policy no longer applies. 1. 2. 3. 4. Scan the QR code or search for “Fuzozo” in your mobile app store to download the app. Open the app and follow the prompts to create your Fuzozo’s “digital life”. Follow the app prompts to interact with your Fuzozo, build a‹inity, and unlock more skills. Adjust your Fuzozo’s volume and eye screen brightness through the app. App Download and Use Thank you for purchasing a Fuzozo product. The content referenced herein relates to your safety, legal rights, and responsibilities. This disclaimer may be updated from time to time. Please visit the o‹icial Fuzozo website at www.fuzozo.net for the latest prod- uct information. By using this product, you acknowledge that you have carefully read the disclaimer and precautions, and that you understand, agree to, and accept all terms and conditions set forth in this disclaimer and safety guide. You undertake to use this product properly, in appropri- ate environments, and for legitimate purposes. You further undertake to assume full responsibility for your use of this product and any consequences that may arise. You agree to comply with the terms herein, including health and safety notices, as well as any related terms, policies, and guidelines established by Fuzozo. Failure to use the product properly or to follow the safety guide instructions, resulting in property damage or personal injury, shall not be the responsibili- ty of Fuzozo. Please note that your use of products, services, applica- tions, or other content provided by third parties through Fuzozo (referred to as “Third-Party Content”) is subject to the relevant policies, regulations, and agreements of those third parties. In the event of any conflict between such third-party policies, regulations, or agreements WARNINGS Disclaimer Do not use, store, or charge this product in direct sunlight, near heat sources, or in high-temperature environments. Store the product in a cool, dry place. This product contains a lithium ba™ery. Avoid impact, crushing, or puncturing. Only use a standard charger rated at 5V2A that complies with national CCC certification (sold sepa- rately) to charge this product. Adult supervision is required during charging. Discontinue use immediately if the product becomes abnormally hot. This product is not waterproof. Do not immerse in water or expose to liquids. This product is intended for collection and use by persons aged 18 and above. Do not give to children under 18 years of age. This product contains small and sharp accessories — use with care. Keep pack- aging bags away from young children to prevent them from playing with them. Minors aged 18 and 1. 2. 3. 4. 5. 6. and this disclaimer and safety guide, this disclaimer and safety guide shall prevail. Under no circumstances shall Fuzozo be considered the licensor of Third-Party Content, nor shall Fuzozo make any representations or warranties regarding Third-Party Content, or assume any responsi- bility or liability for any content or functionality contained in Third-Party Content. 1. 2. Power On: When the device is o‹, press and hold the Power bu™on on the right side of the charging port on the back for 2 seconds. The eyes will light up to indicate the device has powered on successfully. Power O‹: Press and hold the Power bu™on on the back for 2 seconds. The eyes will turn o‹ to indicate the device has powered o‹ successfully. 2 sec Power On/O„ Network Setup This device supports cellular data and is also compatible with Wi-Fi (2.4 GHz) for network setup. Choose the appropriate method based on your usage scenario. Cellular Data Setup: Double-press the Power bu™on to activate the cellular data network. Once activated, the device is ready for normal use. If the cellular data connection fails, please contact Support. 1. Wi-Fi Setup: You can manually add a Wi-Fi network in the app’s Se™ings menu to initiate Wi-Fi connection. 2. Network Se™ings Wi-Fi Network Enhancement Configure Network Fuzozo APP above must obtain explicit consent from their guardian before using this product, and must use it under the guardian’s accompaniment or super- vision. Guardians should fully understand the product instructions, operating procedures, and safety risks. This packaging and manual contain important information. Please retain for future reference. Read the instructions before use to avoid damage, malfunction, or injury caused by improper operation. This product contains AI interactive function only for entertainment purposes. AI responses are not real human consultation and may have inaccura- cies. Do NOT rely on AI guidance for emergency, medical, legal or safety critical ma™ers. 7. 8. Warranty Exclusions The warranty policy does not apply to products under any of the following circumstances: Product returns and exchanges can only be processed at the original point of purchase. Please keep this warranty card in a safe place. Do not alter or deface it. For Fuzozo warranty service terms, please contact: [email protected]. 2. 3. 4. The warranty period has expired. Damage caused by human factors, such as physical damage or liquid ingress. Unauthorized disassembly or firmware modifica- tion by personnel not authorized by Fuzozo. Damage caused by force majeure. Resale of your product or purchase from any unof- ficial or unauthorized channel. Use of the product in violation of any applicable law or your…

Text truncated - open the document above for the full version.

Report No.: BTL-FCC SAR-1-2607C252 Report Version: R00 Page 1 of 36 FCC SAR Test Report FCC ID: 2BW7J-FZ1212 Project No. : 2607C252 Equipment : Fuzozo,FuzozoTAMI-US,FuzozoWUWA-US,FuzozoPOLU-US,Fuzozo FIFI-US,FuzozoMUKU-US Brand Name : Fuzozo Model Name : FZ1212 Date of Receipt : Jul. 27, 2026 Date of Test : Jul. 27, 2026 ~ Aug. 19, 2026 Issued Date : Aug. 20, 2026 Test Sample : Engineering Sample No.: DG920260727153 Standard(s) : Please refer to page 2. Applicant : Robopoet Tech Co., Limited Address : 789 Huafa Road, Xuhui District,Shanghai City Manufacturer : Robopoet Tech Co., Limited Address : 789 Huafa Road, Xuhui District,Shanghai City Factory : CTTech Co., Ltd Address : Xinli plant, No.l South Side of Xinhua Avenue,Tongqiao Town, Zhongkai High Tech Zone, Huizhou City The above equipment has been tested and found compliance with the requirement of the relative standards by BTL Inc. (Dongguan). Prepared by : Justin Huang Approved by : Herbort Liu No.3, Jinshagang 1st Road, Dalang, Dongguan, Guangdong People’s Republic of China. Te l : + 8 6-769-8318-3000 Web: www.newbtl.com Service mail: [email protected] Report No.: BTL-FCC SAR-1-2607C252 Report Version: R00 Page 2 of 36 Standard(s) : IEEE Std C95.1:2019 IEEE Standard for Safety Levels with Respect to Human Exposure to Electric, Magnetic, and Electromagnetic Fields, 0 kHz to 300 GHz IEEE Std 1528 TM -2013 lEEE Recommended Practice for Determining the Peak Spatial-Average Specific Absorption Rate (SAR) in the Human Head from Wireless Communications Devices: Measurement Techniques KDB447498 D01 General RF Exposure Guidance v06 KDB865664 D01 SAR measurement 100 MHz to 6 GHz v01r04 Test method : KDB865664 D02 SAR Reporting v01r02 KDB941225 D05 SAR for LTE Devices v02r05 KDB248227 D01 802.11 Wi-Fi SAR v02r02 KDB690783 D01 SAR Listings on Grants v01r03 Report No.: BTL-FCC SAR-1-2607C252 Report Version: R00 Page 3 of 36 Declaration BTL represents to the client that testing is done in accordance with standard procedures as applicable and that test instruments used has been calibrated with standards traceable to international standard(s) and/or national standard(s). BTL's reports apply only to the specific samples tested under conditions. It is manufacturer’s responsibility to ensure that additional production units of this model are manufactured with the identical electrical and mechanical components. BTL assumes no responsibility for the data provided by the customer, any statements, inferences or generalizations drawn by the customer or others from the reports issued by BTL. The report must not be used by the client to claim product certification, approval, or endorsement by A2LA or any agency of the U.S. Government. This report is the confidential property of the client. As a mutual protection to the clients, the public and ourselves, the test report shall not be reproduced, except in full, without our written approval. BTL’s laboratory quality assurance procedures are in compliance with the ISO/IEC 17025: 2017 requirements, and accredited by the conformity assessment authorities listed in this test report. BTL is not responsible for the sampling stage, so the results only apply to the sample as received. The information, data and test plan are provided by manufacturer which may affect the validity of results, so it i s manufacturer’s responsibility to ensure that the apparatus meets the essential requirements of applied standards and in all the possible configurations as representative of its intended use. Limitation For the use of the authority's logo is limited unless the Test Standard(s)/Scope(s)/Item(s) mentioned in this test report is (are) included in the conformity assessment authorities acceptance respective. Please note that the measurement uncertainty is provided for informational purpose only and are not use in determining the Pass/Fail results. Report No.: BTL-FCC SAR-1-2607C252 Report Version: R00 Page 4 of 36 Table of Contents Page REVISION HISTORY 6 1 . GENERAL INFORMATION 7 1.1 STATEMENT OF COMPLIANCE 7 1.2 LABORATORY ENVIRONMENT 7 1.3 GENERAL DESCRIPTION OF EUT 8 1.4 MAIN TEST INSTRUMENTS 10 2 . RF EMISSIONS MEASUREMENT 11 2.1 TEST FACILITY 11 2.2 MEASUREMENT UNCERTAINTY 11 3 . SAR MEASUREMENTS SYSTEM CONFIGURATION 12 3.1 SAR MEASUREMENT SET-UP 12 3.1.1 TEST SETUP LAYOUT 12 3.2 DASY E-FIELD PROBE SYSTEM 13 3.2.1 PROBE SPECIFICATION 13 3.2.2 E-FIELD PROBE CALIBRATION 14 3.2.3 OTHER TEST EQUIPMENT 15 3.2.4 SCANNING PROCEDURE 16 4 . SYSTEM VERIFICATION PROCEDURE 18 4.1 TISSUE VERIFICATION 18 4.2 SYSTEM CHECK 19 4.3 SYSTEM CHECK PROCEDURE 19 5 . OPERATIONAL CONDITIONS DURING TEST 20 5.1 GENERAL DESCRIPTION OF TEST PROCEDURES 20 5.2 SAR TEST CONFIGURATION 20 5.2.1 LTE TEST CONFIGURATION 20 5.2.2 WIFI TEST CONFIGURATION 24 5.3 TEST POSITION 25 5.3.1 BODY-WORN TEST CONFIGURATION 25 6 . TEST RESULT 26 6.1 CONDUCTED POWER RESULTS 26 6.2 SAR TEST RESULTS 27 6.2.1 SAR MEASUREMENT RESULT OF BODY-WORN 28 6.3 MULTIPLE TRANSMITTER EVALUATION 33 APPENDIX 34 Report No.: BTL-FCC SAR-1-2607C252 Report Version: R00 Page 5 of 36 Table of Contents Page 1. TEST LAYOUT 34 Appendix A. SAR Plots of System Verification Appendix B. SAR Plots of SAR Measurement Appendix C. Calibration Certificate Appendix D. Photographs of the Test Set-Up Appendix E. Conducted power measurement result Report No.: BTL-FCC SAR-1-2607C252 Report Version: R00 Page 6 of 36 REVISION HISTORY Report No. Version Description Issued Date Note BTL-FCC SAR-1-2607C252 R00 Original Report. Aug. 20, 2026 Valid Report No.: BTL-FCC SAR-1-2607C252 Report Version: R00 Page 7 of 36 1. GENERAL INFORMATION 1.1 STATEMENT OF COMPLIANCE Mode Highest Reported Body-worn SAR-1g (W/kg) LTE B2 0.635 LTE B4 0.620 LTE B5 0.431 LTE B7 1.184 LTE B12 0.206 LTE B13 0.277 LTE B14 0.328 LTE B17 0.181 LTE B25 0.454 LTE B26 0.315 LTE B38 0.506 LTE B41 1.023 LTE B66 0.651 WLAN 2.4G 0.481 Bluetooth 0.043 Note: 1) The device is in compliance with Specific Absorption Rate (SAR) for general population uncontro…

Text truncated - open the document above for the full version.

Setup Photographs Radiated Band edge and Spurious Emission BT+2.4GWIFI: Page 2 of 4 4G: Page 3 of 4 NFC: Page 4 of 4 AC Power Line Conducted Emission

SPECIFICATION FOR APPROVAL/产品承认书 Customer Name 客户名称： 上海珞亨智能科技有限公司 Customer P/N. 客户料号： Product Description 产品描述： BGS P/N 博格斯料号 AI玩具WIFI天线 ： Manufacturer 制造商 LBZ-001B ： 深圳市博格斯通信技术有限公司 Approve Date 承认日期： 2026年6月16日 BGS Sign and Seal/供应商签章Customer Sign and Seal/客户签章 Change the content/变更内容Version/版本Date/日期 初版RA2026/6/16 Note: 1. After the electronic file or paper file that has been stamped by BGS and was provided to the customer,, the customer need to sign the paper or electronic file of the approval back to BGS before place the formal order to BGS. If there is no formal change or change notice, BGS acqu iesce that the customer approvel and accept this specification of product . 注：1、博格斯已经盖章的电子档或是纸质档提供给需求方后，请需求方在下达正式订单给博格斯前,将承认书 纸质档或电子档回签给博格斯，如没有正式的变更或是更改通知，则博格斯默认为需求方认可并接受规格书所 述产品。 2. The relevant intellectual property rights of this product are owned by Shenzhen Bogesi Communication Technology Co., Ltd. Without the permission of our BGS, please do not apply for patent rights for this product in other names, and please do not disclose this product and related information to others or provide to third-party for viewing and use. 2、本产品相关知识产权归深圳市博格斯通信技术有限公司所有，未经我司许可，请不要以其他名义就本产品 进行专利权的申请，请不要将本产品及相关资料泄露给他人或提供第三方阅览使用。 地址:深圳市高新技术产业园中区科技中一路19号赛百诺基因治疗园B栋3楼308 电话/传真:0755-86525983/0755-86539353 Directory/目录 Cover/封面------------------------------------------------------------1 Directory/目录--------------------------------------------------------2 Antenna Specification/天线技术参数------------------------------------3 Antenna Picture And Installation Instructions/天线图片及安装说明------4 Test Report/测试报告------------------------------------------------5-7 Finished Product Drawing/成品图---------------------------------------8 Packaging Diagram/包装图----------------------------------------------9 ROHS Report/ROHS报告--------------------------------------------------10 1.Antenna Specification/天线技术参数 1.1: Electrical Specification/电气特性 Freq.Range/频段范围（MHz） Impedance/阻抗（Ω 2400-2500 ）50 VSWR/驻波比≤3 Directional/辐射方向Omni directional Polarization/极化方式Linear Peak Gain/峰值增益（dBi） 2400-2500MHz;1.85dBi 1.2: Mechanical Specification/机械指标 Material/材质FPC+同轴线 RF Cable Type/射频线型号N/A Connector Type/连接器类型N/A 1.3: Environmental Specification/环境指标 Operation temp/工作温度-40°C～+85°C Long Term Storage temp/长期储存温度-40°C～+85°C 2.Antenna Picture And Installation Instructions/天线图片及安装说明 2.1: AntennaPictureandInstallationInstructions/天线图片及安装说明 3.Test Report/测试报告 3.1: The matching circuits/匹配电路 3.2: Antenna efficiency and gain/天线效率与增益 3.3:Antennaefficiencyandgain/天线效率与增益

TRF No.: 04-E001-0B TRF Originator: GTG TRF Date: 2023-12-13 Web: www.gtggroup.com E-mail: [email protected] Tel.: 86-400 755 8988 CFR 47 FCC PART 15 SUBPART C TEST REPORT For Fuzozo,FuzozoTAMI-US,FuzozoWUWA-US,FuzozoPOLU-US,FuzozoFIFI- US,FuzozoMUKU-US MODEL NUMBER: FZ1212 REPORT NUMBER: E04A26070506F01002 ISSUE DATE: August 18, 2026 FCC ID: 2BW7J-FZ1212 Prepared for Robopoet Tech Co., Limited 789 Huafa Road, Xuhui District, Shanghai City Prepared by Guangdong Global Testing Technology Co., Ltd. Room 101-105, 203-210, Building 1, No.2, Keji 8 Road, Songshan Lake Park, Dongguan city, Guangdong, People’s Republic of China, 523808 This report is based on a single evaluation of the submitted sample(s) of the above mentioned product, it does not imply an assessment of the production of the products. This report shall not be reproduced, except in full, without the written approval of Guangdong Global Testing Technology Co., Ltd. REPORT NO.: E04A26070506F01002 Page 2 of 45 TRF No.: 04-E001-0B Global Testing , Great Quality. Revision History Rev. Issue Date Revisions Revised By V0 August 18, 2026 Initial Issue REPORT NO.: E04A26070506F01002 Page 3 of 45 TRF No.: 04-E001-0B Global Testing , Great Quality. Summary of Test Results Test Item Clause Limit/Requirement Result Antenna Requirement N/A FCC Part 15.203/15.247 (c) RSS-GEN Clause 6.8 Pass AC Power Line Conducted Emission ANSI C63.10-2020, Clause 6.2 FCC Part 15.207 RSS-GEN Clause 8.8 Pass Conducted Output Power ANSI C63.10-2020, Clause 11.9.1.2 FCC Part 15.247 (b)(3) RSS-247 Clause 6.3.2 Pass 6dB Bandwidth and 99% Occupied Bandwidth ANSI C63.10-2020, Clause 11.8.1 or 11.8.2 FCC Part 15.247 (a)(2) RSS-247 Clause 6.3.1(a) ISED RSS-Gen Clause 6.7 Pass Power Spectral Density ANSI C63.10-2020, Clause 11.10.2 FCC Part 15.247 (e) RSS-247 Clause 6.3.1(b) Pass Conducted Band edge and spurious emission ANSI C63.10-2020, Clause 11.11 FCC Part 15.247(d) RSS-247 Clause 6.6 Pass Radiated Band edge and Spurious Emission ANSI C63.10-2020, Clause 11.12 FCC Part 15.247(d) FCC Part 15.205/15.209 RSS-247 Clause 6.6 RSS-GEN Clause 8.9 Pass Duty Cycle ANSI C63.10-2020, Clause 11.6 None; for reporting purposes only. Pass Note: 1. For ISED, this report is also performed according to ANSI C63.10-2020 + Cor.1-2023 + C63.10a-2024 + Errata to C63.10a-2024 standards. 2. N/A: In this whole report not applicable. *This test report is only published to and used by the applicant, and it is not for evidence purpose in China. *The measurement result for the sample received is <Pass> according to < CFR 47 FCC PART 15 SUBPART C, ISED RSS-247 Issue 4> when <Accuracy Method> decision rule is applied. REPORT NO.: E04A26070506F01002 Page 4 of 45 TRF No.: 04-E001-0B Global Testing , Great Quality. CONTENTS 1. ATTESTATION OF TEST RESULTS ..................................................................................... 5 2. TEST METHODOLOGY ......................................................................................................... 6 3. FACILITIES AND ACCREDITATION ..................................................................................... 6 4. CALIBRATION AND UNCERTAINTY ................................................................................... 7 4.1. MEASURING INSTRUMENT CALIBRATION ........................................................... 7 4.2. MEASUREMENT UNCERTAINTY ............................................................................ 7 5. EQUIPMENT UNDER TEST .................................................................................................. 8 5.1. DESCRIPTION OF EUT ........................................................................................... 8 5.2. CHANNEL LIST ........................................................................................................ 8 5.3. MAXIMUM CONDUCTED OUTPUT POWER ........................................................... 9 5.4. TEST CHANNEL CONFIGURATION ........................................................................ 9 5.5. THE WORSE CASE POWER SETTING PARAMETER ............................................ 9 5.6. DESCRIPTION OF AVAILABLE ANTENNAS ........................................................... 9 5.7. SUPPORT UNITS FOR SYSTEM TEST ................................................................. 10 5.8. SETUP DIAGRAM .................................................................................................. 10 6. MEASURING EQUIPMENT AND SOFTWARE USED......................................................... 11 7. ANTENNA PORT TEST RESULTS ..................................................................................... 13 7.1. Conducted Output Power ........................................................................................ 13 7.2. 6dB Bandwidth and 99% Occupied Bandwidth ....................................................... 14 7.3. Power Spectral Density ........................................................................................... 16 7.4. Conducted Band edge and spurious emission ........................................................ 17 7.5. Duty Cycle .............................................................................................................. 19 8. RADIATED TEST RESULTS ............................................................................................... 20 8.1. Radiated Band edge and Spurious Emission .......................................................... 26 9. ANTENNA REQUIREMENT ................................................................................................ 40 10. AC POWER LINE CONDUCTED EMISSION ......................................................... 42 11. TEST DATA - APPENDIX B ................................................................................... 45 REPORT NO.: E04A26070506F01002 Page 5 of 45 TRF No.: 04-E001-0B Global Testing , Great Quality. 1. ATTESTATION OF TEST RESULTS Applicant Information Company Name: Robopoet Tech Co., Lim…

Text truncated - open the document above for the full version.

TRF No.: 04-E001-0B TRF Originator: GTG TRF Date: 2023-12-13 Web: www.gtggroup.com E-mail: [email protected] Tel.: 86-400 755 8988 CFR 47 FCC PART 15 SUBPART C TEST REPORT For Fuzozo,FuzozoTAMI-US,FuzozoWUWA-US,FuzozoPOLU-US,FuzozoFIFI- US,FuzozoMUKU-US MODEL NUMBER: FZ1212 REPORT NUMBER: E04A26070506F01001 ISSUE DATE: August 18, 2026 FCC ID: 2BW7J-FZ1212 Prepared for Robopoet Tech Co., Limited 789 Huafa Road, Xuhui District, Shanghai City Prepared by Guangdong Global Testing Technology Co., Ltd. Room 101-105, 203-210, Building 1, No.2, Keji 8 Road, Songshan Lake Park, Dongguan city, Guangdong, People’s Republic of China, 523808 This report is based on a single evaluation of the submitted sample(s) of the above mentioned product, it does not imply an assessment of the production of the products. This report shall not be reproduced, except in full, without the written approval of Guangdong Global Testing Technology Co., Ltd. REPORT NO.: E04A26070506F01001 Page 2 of 51 TRF No.: 04-E001-0B Global Testing , Great Quality. Revision History Rev. Issue Date Revisions Revised By V0 August 18, 2026 Initial Issue REPORT NO.: E04A26070506F01001 Page 3 of 51 TRF No.: 04-E001-0B Global Testing , Great Quality. Summary of Test Results Test Item Clause Limit/Requirement Result Antenna Requirement N/A FCC Part 15.203/15.247 (c) RSS-GEN Clause 6.8 Pass AC Power Line Conducted Emission ANSI C63.10-2020, Clause 6.2 FCC Part 15.207 RSS-GEN Clause 8.8 Pass Conducted Output Power ANSI C63.10-2020, Clause 11.9.2.3.2 FCC Part 15.247 (b)(3) RSS-247 Clause 6.3.2 Pass 6dB Bandwidth and 99% Occupied Bandwidth ANSI C63.10-2020, Clause 11.8.1 or 11.8.2 FCC Part 15.247 (a)(2) RSS-247 Clause 6.3.1(a) ISED RSS-Gen Clause 6.7 Pass Power Spectral Density ANSI C63.10-2020, Clause 11.10.5 FCC Part 15.247 (e) RSS-247 Clause 6.3.1(b) Pass Conducted Band edge and spurious emission ANSI C63.10-2020, Clause 11.11 FCC Part 15.247(d) RSS-247 Clause 6.6 Pass Radiated Band edge and Spurious Emission ANSI C63.10-2020, Clause 11.12 FCC Part 15.247(d) FCC Part 15.205/15.209 RSS-247 Clause 6.6 RSS-GEN Clause 8.9 Pass Duty Cycle ANSI C63.10-2020, Clause 11.6 None; for reporting purposes only. Pass Note: 1. This report is also performed according to ANSI C63.10-2020 + Cor.1-2023 + C63.10a-2024 + Errata to C63.10a-2024 standards. 2. N/A: In this whole report not applicable. *This test report is only published to and used by the applicant, and it is not for evidence purpose in China. *The measurement result for the sample received is <Pass> according to <CFR 47 FCC PART 15 SUBPART C, RSS-247 Issue 4> when <Accuracy Method> decision rule is applied. REPORT NO.: E04A26070506F01001 Page 4 of 51 TRF No.: 04-E001-0B Global Testing , Great Quality. CONTENTS 1. ATTESTATION OF TEST RESULTS ..................................................................................... 5 2. TEST METHODOLOGY ......................................................................................................... 6 3. FACILITIES AND ACCREDITATION ..................................................................................... 6 4. CALIBRATION AND UNCERTAINTY ................................................................................... 7 4.1. MEASURING INSTRUMENT CALIBRATION ........................................................... 7 4.2. MEASUREMENT UNCERTAINTY ............................................................................ 7 5. EQUIPMENT UNDER TEST .................................................................................................. 8 5.1. DESCRIPTION OF EUT ........................................................................................... 8 5.2. CHANNEL LIST ........................................................................................................ 9 5.3. MAXIMUM CONDUCTED OUTPUT POWER ........................................................... 9 5.4. TEST CHANNEL CONFIGURATION ........................................................................ 9 5.5. THE WORSE CASE POWER SETTING PARAMETER .......................................... 10 5.6. DESCRIPTION OF AVAILABLE ANTENNAS ......................................................... 10 5.7. SUPPORT UNITS FOR SYSTEM TEST ................................................................. 11 5.8. SETUP DIAGRAM .................................................................................................. 11 6. MEASURING EQUIPMENT AND SOFTWARE USED......................................................... 12 7. ANTENNA PORT TEST RESULTS ..................................................................................... 14 7.1. Conducted Output Power ........................................................................................ 14 7.2. 6dB Bandwidth and 99% Occupied Bandwidth ....................................................... 15 7.3. Power Spectral Density ........................................................................................... 17 7.4. Conducted Band edge and spurious emission ........................................................ 18 7.5. Duty Cycle .............................................................................................................. 20 8. RADIATED TEST RESULTS ............................................................................................... 21 8.1. Radiated Band edge and Spurious Emission .......................................................... 28 9. ANTENNA REQUIREMENT ................................................................................................ 46 10. AC POWER LINE CONDUCTED EMISSION ......................................................... 48 11. TEST DATA - APPENDIX A ................................................................................... 51 REPORT NO.: E04A26070506F01001 Page 5 of 51 TRF No.: 04-E001-0B Global Testing , Great Quality. 1. ATTESTATION OF TEST RESULTS Applicant Information Company Name: Robopoet Tech Co., Limited Address: 78…

Text truncated - open the document above for the full version.

Duty Cycle Condition Mode Frequency (MHz) Antenna Duty Cycle (%) Correction Factor (dB) 1/T (kHz) NVNT BLE 1M 2402 Ant1 100 0 0 NVNT BLE 1M 2440 Ant1 100 0 0 NVNT BLE 1M 2480 Ant1 100 0 0 NVNT BLE 2M 2402 Ant1 100 0 0 NVNT BLE 2M 2440 Ant1 100 0 0 NVNT BLE 2M 2480 Ant1 100 0 0 2 / 32 Duty Cycle NVNT BLE 1M 2402MHz Ant1 Duty Cycle NVNT BLE 1M 2440MHz Ant1 3 / 32 Duty Cycle NVNT BLE 1M 2480MHz Ant1 Duty Cycle NVNT BLE 2M 2402MHz Ant1 4 / 32 Duty Cycle NVNT BLE 2M 2440MHz Ant1 Duty Cycle NVNT BLE 2M 2480MHz Ant1 5 / 32 Maximum Peak Conducted Output Power Condition Mode Frequency (MHz) Antenna Conducted Power (dBm) Conducted Power (W) Limit Conducted(dBm) Verdict NVNT BLE 1M 2402 Ant1 2.01 0.00159 30 Pass NVNT BLE 1M 2440 Ant1 2.85 0.00193 30 Pass NVNT BLE 1M 2480 Ant1 3.71 0.00235 30 Pass NVNT BLE 2M 2402 Ant1 1.87 0.00154 30 Pass NVNT BLE 2M 2440 Ant1 2.83 0.00192 30 Pass NVNT BLE 2M 2480 Ant1 3.67 0.00233 30 Pass 6 / 32 Peak Power NVNT BLE 1M 2402MHz Ant1 Peak Power NVNT BLE 1M 2440MHz Ant1 7 / 32 Peak Power NVNT BLE 1M 2480MHz Ant1 Peak Power NVNT BLE 2M 2402MHz Ant1 8 / 32 Peak Power NVNT BLE 2M 2440MHz Ant1 Peak Power NVNT BLE 2M 2480MHz Ant1 9 / 32 -6dB Bandwidth Condition Mode Frequency (MHz) Antenna -6 dB Bandwidth (MHz) Limit -6 dB Bandwidth (MHz) Verdict NVNT BLE 1M 2402 Ant1 0.6948 0.5 Pass NVNT BLE 1M 2440 Ant1 0.695 0.5 Pass NVNT BLE 1M 2480 Ant1 0.6798 0.5 Pass NVNT BLE 2M 2402 Ant1 1.35 0.5 Pass NVNT BLE 2M 2440 Ant1 1.347 0.5 Pass NVNT BLE 2M 2480 Ant1 1.341 0.5 Pass 10 / 32 -6dB Bandwidth NVNT BLE 1M 2402MHz Ant1 -6dB Bandwidth NVNT BLE 1M 2440MHz Ant1 11 / 32 -6dB Bandwidth NVNT BLE 1M 2480MHz Ant1 -6dB Bandwidth NVNT BLE 2M 2402MHz Ant1 12 / 32 -6dB Bandwidth NVNT BLE 2M 2440MHz Ant1 -6dB Bandwidth NVNT BLE 2M 2480MHz Ant1 13 / 32 Occupied Channel Bandwidth Condition Mode Frequency (MHz) Antenna 99% OBW (MHz) NVNT BLE 1M 2402 Ant1 1.0351 NVNT BLE 1M 2440 Ant1 1.0354 NVNT BLE 1M 2480 Ant1 1.0327 NVNT BLE 2M 2402 Ant1 2.0679 NVNT BLE 2M 2440 Ant1 2.0667 NVNT BLE 2M 2480 Ant1 2.068 14 / 32 OBW NVNT BLE 1M 2402MHz Ant1 OBW NVNT BLE 1M 2440MHz Ant1 15 / 32 OBW NVNT BLE 1M 2480MHz Ant1 OBW NVNT BLE 2M 2402MHz Ant1 16 / 32 OBW NVNT BLE 2M 2440MHz Ant1 OBW NVNT BLE 2M 2480MHz Ant1 17 / 32 Maximum Power Spectral Density Level Condition Mode Frequency (MHz) Antenna Conducted PSD (dBm/3kHz) Limit (dBm/3kHz) Verdict NVNT BLE 1M 2402 Ant1 -13.96 8 Pass NVNT BLE 1M 2440 Ant1 -13.15 8 Pass NVNT BLE 1M 2480 Ant1 -12.2 8 Pass NVNT BLE 2M 2402 Ant1 -18.51 8 Pass NVNT BLE 2M 2440 Ant1 -17.53 8 Pass NVNT BLE 2M 2480 Ant1 -16.61 8 Pass 18 / 32 PSD NVNT BLE 1M 2402MHz Ant1 PSD NVNT BLE 1M 2440MHz Ant1 19 / 32 PSD NVNT BLE 1M 2480MHz Ant1 PSD NVNT BLE 2M 2402MHz Ant1 20 / 32 PSD NVNT BLE 2M 2440MHz Ant1 PSD NVNT BLE 2M 2480MHz Ant1 21 / 32 Band Edge Condition Mode Frequency (MHz) Antenna Max Value (dBc) Limit (dBc) Verdict NVNT BLE 1M 2402 Ant1 -52.76 -20 Pass NVNT BLE 1M 2480 Ant1 -53.52 -20 Pass NVNT BLE 2M 2402 Ant1 -33.89 -20 Pass NVNT BLE 2M 2480 Ant1 -52.52 -20 Pass 22 / 32 Band Edge NVNT BLE 1M 2402MHz Ant1 Ref Band Edge NVNT BLE 1M 2402MHz Ant1 Emission 23 / 32 Band Edge NVNT BLE 1M 2480MHz Ant1 Ref Band Edge NVNT BLE 1M 2480MHz Ant1 Emission 24 / 32 Band Edge NVNT BLE 2M 2402MHz Ant1 Ref Band Edge NVNT BLE 2M 2402MHz Ant1 Emission 25 / 32 Band Edge NV…

Text truncated - open the document above for the full version.