2BW8G-SN-SZ08BVibration Plate

2726 FRFR ITFR 3617 DEIT 1637 ITDE DEES 746 ESEN 476 ENES 458 ENES 548 ESEN 494 ENES 1835 ITDE 2528 FRFR 3815 DEIT 1439 ITDE 42 43 43-44 45-47 48-49 50 51 51 1142 ESEN 32 33 33-34 35-37 38-39 40 41 41 3221 DEIT 22 23 23-24 25-27 28-29 30 31 31 3122 FRFR 12 13 13-14 15-17 18-19 20 21 21 1241 ITDE EN 2924 FRFR 2033 ITDE 4013 DEIT 350 ESEN 512 2 3 3-4 5-7 8-9 10 11 11 ENES 4310 ENESENEN 944 ES DEEN 3419 IT PAGE: English Deutsch Français Italiano Español 1 1-11 12-21 22-31 32-41 42-51 30 FRFR 23 ����.�.�� 蓝牙 Customer Service & Support Thank you for purchasing our product! If you have any questions about the product, need operational guidance, or encounter any quality issues, please feel free to contact us via the following email address. Our professional customer service team is here to assist you. Customer service email: [email protected] To help us process your inquiry more efficiently, please include your Order ID or Product Serial Number in your email. 445*346*16mm 445*346*16mm 445*346*16mm 445*346*16mm 445*346*16mm SZJ-SZ08B 5.0/6.0kg SZJ-SZ08B 5.0/6.0kg SZJ-SZ08B 5.0/6.0kg SZJ-SZ08B 5.0/6.0kg SZJ-SZ08B 5.0/6.0kg FCC Caution. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular i nstallation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.-Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

WuyiCanhongFitnessEquipmentCo.,Ltd. CoveredEquipmentCertificationAttestationLetter 7/21/2026 NemkoNorthAmerica,Inc. 303RiverRoad Ottawa K1V1H2 Canada ATTN.:ReviewingEngineer FCCID:2BW8G-SN-SZ08B WuyiCanhongFitnessEquipmentCo.,Ltd.(“theapplicant”)certifiesthattheequipment forwhichauthorizationissoughtisnot“covered”equipmentprohibitedfromreceivingan equipmentauthorizationpursuanttosection2.903oftheFCCrules. Note:Iftheequipmentforwhichtheapplicantseeksauthorizationisproducedby anyoftheentitiesidentifiedonthecurrentCoveredList,theapplicantshould includeanexplanationonwhytheequipmentisnot“covered”equipment. WuyiCanhongFitnessEquipmentCo.,Ltd.(“theapplicant”)certifiesthat,asofthedate ofthefilingoftheapplication,theapplicantisnotidentifiedontheCoveredListasan entityproducing“covered”equipment. WuyiCanhongFitnessEquipmentCo.,Ltd.(“theapplicant”)certifiesthattheequipment forwhichauthorizationissoughtdoesnotincludecybersecurityoranti-virussoftware producedorprovidedbyKasperskyLab,Inc.oranyofitssuccessorsandassignees, includingequipmentwithintegratedKasperskyLab,Inc.(oranyofitssuccessorsand assignees)cybersecurityoranti-virussoftwarepursuanttoDA-24-886andKDB986446 D01CoveredEquipmentGuidancesectionB(2a). Signed: Printedname:HaiYongDuan Title:GeneralManager CompanyName:WuyiCanhongFitnessEquipmentCo.,Ltd. Date:7/21/2026

WuyiCanhongFitnessEquipmentCo.,Ltd. 7/21/2026 NemkoNorthAmerica,Inc. 303RiverRoad Ottawa,Ontario,Canada K1V1H2 REQUESTFORCONFIDENTIALITY-FCC FCCID:2BW8G-SN-SZ08B PursuanttoSections0.457(d)(1)(ii)and0.459oftheCommission’sRulesandFCCGuidance document726920,weherebyrequestconfidentialtreatmentofinformationaccompanyingthis applicationasoutlinedbelow: PERMANENTLONG-TERMCONFIDENTIALITY: Schematics BlockDiagrams TheoryofOperation Theaboveinformationcontainstradesecretsandproprietaryinformationnotcustomarilyreleasedto thepublic.Thepublicdisclosureofthisinformationmightbeharmfultotheapplicantandprovide unjustifiedbenefitstoitscompetitors.TheApplicantunderstandsthatpursuanttoRule0.457(d)(1)(ii), disclosureofthisApplicationandallaccompanyingmaterialswillnotbemadebeforethedateofthe GrantforthisApplication. Sincerely, Signed: Printedname:HaiYongDuan Title:GeneralManager

WuyiCanhongFitnessEquipmentCo.,Ltd. ProductSimilarityDeclaration Productname:VibrationPlate Modelname:SN-SZ08B,SN-SZ10B,SN-SZ12B,SN-SZ02B FCCID:2BW8G-SN-SZ08B We(WuyiCanhongFitnessEquipmentCo.,Ltd.)herebystatethat allthemodelsareelectricalidenticalincludingthesamesoftware parameter(circuitdesign,PCBLayout,RFmodule/circuit, antennatype(s)andantennalocation,componentsonPCB,etc.,), Thepanelshape,colorandtexture,andpowerbuttonaredifferent. Detaileddescriptionasfollows: Model Photos SN-SZ08B SN-SZ10B SN-SZ12B SN-SZ02B WuyiCanhongFitnessEquipmentCo.,Ltd. Signature: Printedname:HaiYongDuan Title:GeneralManager CompanyName:WuyiCanhongFitnessEquipmentCo.,Ltd. Date:July31,2026

FCCID:2BW8G-SN-SZ08B FCCID:2BW8G-SN-SZ08B FCCID:2BW8G-SN-SZ08B FCCID:2BW8G-SN-SZ08B FCCID:2BW8G-SN-SZ08B FCCID:2BW8G-SN-SZ08B

LabelandLabelLocation FCC ID: 2BW8G-SN-SZ08B

FCCID:2BW8G-SN-SZ08B FCCID:2BW8G-SN-SZ08B FCCID:2BW8G-SN-SZ08B FCCID:2BW8G-SN-SZ08B FCCID:2BW8G-SN-SZ08B FCCID:2BW8G-SN-SZ08B

Page 1 of 2 RF EXPOSURE EVALUATION FCC ID: 2BW8G-SN-SZ08B Product Name : Vibration Plate Model Name : SN-SZ08B, SN-SZ10B, SN-SZ12B, SN-SZ02B Bluetooth Version : BT BDR+EDR Operating frequency : 2402-2480MHz Numbers of Channel : 79 channels for BDR+EDR Antenna Type : PCB antenna Antenna Gain : 2.27 dBi Type of Modulation : GFSK, Π/4-DQPSK,8DPSK For DSS Power supply : Input: AC 110V~ 60Hz 200W Hardware Version : N/A Software Version : N/A Page 2 of 2 Standard Requirement According to § 15.247(i) and § 1.1307b(1), systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy levels in excess of the Commission’s guidelines. See KDB 447498 D01 General RF Exposure Guidance v06, section 4. 3. 1. The 1-g and 10-g SAR test exclusion thresholds for 100MHz to 6GHz at test separation distances ≤ 50mm are determined by: [ (max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)]*[ √f(GHz)] ≤3.0 for 1-g SAR and ≤7.5 for 10-g SAR extremity SAR, where ⚫ f(GHz) is the RF channel transmit frequency in GHz ⚫ Power and distance are rounded to the nearest mW and mm before calculation ⚫ The result is rounded to one decimal place for comparison. The test exclusions are applicable only when the minimum test separation distance is ≤ 50mm and for transmission frequencies between 100MHz and 6GHz. When the minimum test separation distance is <5mm, a distance of 5mm is applied to determine SAR test exclusion. Routine SAR evaluation refers to that specifically required by § 2.1093, using measurements or computer simulation. When routine SAR evaluation is not required, portable transmitters with output power greater than the applicable low threshold require SAR evaluation to quality for TCB approval. Channel (MHz) Maximum output power (dBm) Tune up tolerance (dBm) Max Tune Up Power (mW) Distance (mm) Calculation results Limit Operating Mode 2441 4.31 4.31±1 3.396253 5 1.061241 3 3DH5 According to KDB 447498, The device only support BT function, and no simultaneous SAR measurement is required. Signature Simon Pu Manager Date: 2026-07-17

2.4G-2.48G Test report on PCB antenna SPECIFICATIONS Frequency（MHz）2400-2480 PeakGain（dBi）2.27 AverageGain（dBi）＞0 VSWR＜1.9 Impedance（Ω）50Ω AntennaTypePlannarInvertedFonboard PolarizationLinear Test environment: Zhongke Guoji anechoic chamber testing system Antenna physical dimensions Z X Y Manufacture's name: Shenzhen Chaoyue High-Tech Electronics Co., Ltd. Address: Room A409, Block B, Western Silicon Valley, No. 5010 Baoan Avenue, Baoan District, Shenzhen Antenna passive S-parameters: 驻波比（ VSWR ）、回波损耗（ ReturnLoss ） and Smith's circular chart Frequency（MHz）Gain（dBi）Effciency（% Antenna efficiency and gain ）AverageGain（dBi）Efficiency（dB） 24001.4863.36%-2.73-1.98 24101.2557.22%-3.40-2.43 24200.6054.48%-3.43-2.64 2430-0.0648.04%-3.91-3.18 2440-0.0945.16%-4.20-3.45 24500.3649.24%-3.56-3.08 24601.0854.75%-3.10-2.62 24701.5554.67%-2.97-2.62 24802.2764.19%-2.25-1.93 Average0.9454.57%-3.28-2.66 Peak2.2764.19%-2.25-1.93 Antenna 2400MHz 2D-Theta Pattern Antenna 2440MHz 2D-Theta Pattern Antenna 2480MHz 2D-Theta Pattern Antenna 2400MHz 2D-Phi Pattern Antenna 2440MHz 2D-Phi Pattern Antenna 2480MHz 2D-Phi Pattern Antenna 2400MHz 3D-Total Pattern Antenna 2440MHz 3D-Total Pattern Antenna 2480MHz 3D-Total Pattern

Report No.: PTC26050722703E-FC01 Page 1 of 91 FCC TEST REPORT FCC ID: 2BW8G-SN-SZ08B Product : Vibration Plate Model Name : SN-SZ08B, SN-SZ10B, SN-SZ12B, SN-SZ02B Brand : N/A Report No. : PTC26050722703E-FC01 Prepared for Wuyi Canhong Fitness Equipment Co., Ltd. No. 29, Yingchun Avenue, Baihua Mountain Industrial Zone, Wuyi County (west of Yulan Road), opposite Qingchuangzhi Gu Industrial Park 10-4 Prepared by Precise Testing & Certification Co., Ltd. Building 1, No. 6, Tongxin Road, Dongcheng Street, Dongguan, Guangdong, China Report No.: PTC26050722703E-FC01 Page 2 of 91 1 TEST RESULT CERTIFICATION Applicant’s name : Wuyi Canhong Fitness Equipment Co., Ltd. Address : No. 29, Yingchun Avenue, Baihua Mountain Industrial Zone, Wuyi County (west of Yulan Road), opposite Qingchuangzhi Gu Industrial Park 10-4 Manufacture's name : Wuyi Canhong Fitness Equipment Co., Ltd. Address : No. 29, Yingchun Avenue, Baihua Mountain Industrial Zone, Wuyi County (west of Yulan Road), opposite Qingchuangzhi Gu Industrial Park 10-4 Product name : Vibration Plate Model name : SN-SZ08B,SN-SZ10B,SN-SZ12B,SN-SZ02B Standards : FCC CFR47 Part 15 Section 15.247 Test procedure : ANSI C63.10-2020 Test Date : May. 25, 2026 to Jul. 09, 2026 Date of Issue : Jul. 17, 2026 This device described above has been tested by PTC, and the test results show that the equipment under test (EUT) is in compliance with the FCC requirements. And it is applicable only to the tested sample identified in the report. This report shall not be reproduced except in full, without the written approval of PTC, this document may be altered or revised by PTC, personal only, and shall be noted in the revision of the document. Test Engineer: Jack zhou / Engineer Technical Manager: Simon Pu / Manager Report No.: PTC26050722703E-FC01 Page 3 of 91 Contents Page 1 TEST RESULT CERTIFICATION .............................................................................................................................. 2 2 TEST SUMMARY ......................................................................................................................................................... 5 3 TEST FACILITY ............................................................................................................................................................ 5 4 GENERAL INFORMATION ........................................................................................................................................ 6 4.1 GENERAL DESCRIPTION OF E.U.T. .................................................................................................................... 6 4.2 TEST MODE ........................................................................................................................................................ 7 5 EQUIPMENT DURING TEST ..................................................................................................................................... 9 5.1 EQUIPMENTS LIST............................................................................................................................................... 9 5.2 MEASUREMENT UNCERTAINTY ......................................................................................................................... 11 5.3 DESCRIPTION OF SUPPORT UNITS ................................................................................................................... 12 6 CONDUCTED EMISSION ......................................................................................................................................... 13 6.1 E.U.T. OPERATION ........................................................................................................................................... 13 6.2 EUT SETUP ...................................................................................................................................................... 13 6.3 TEST SET-UP (BLOCK DIAGRAM OF CONFIGURATION) .................................................................................. 14 6.4 MEASUREMENT PROCEDURE: .......................................................................................................................... 14 6.5 CONDUCTED EMISSION LIMIT ........................................................................................................................... 14 6.6 MEASUREMENT DESCRIPTION .......................................................................................................................... 14 6.7 CONDUCTED EMISSION TEST RESULT ............................................................................................................. 14 7 RADIATED SPURIOUS EMISSIONS ..................................................................................................................... 17 7.1 EUT OPERATION .............................................................................................................................................. 17 7.2 TEST SETUP ..................................................................................................................................................... 18 7.3 SPECTRUM ANALYZER SETUP .......................................................................................................................... 19 7.4 TEST PROCEDURE ............................................................................................................................................ 20 7.5 SUMMARY OF TEST RESULTS .......................................................................................................................... 21 8 MAXIMUM PEAK OUTPUT POWER TEST .......................................................................................................... 28 8.1 TEST STANDARD AND LIMIT .............................................................................................................................. 28 8.2 TEST SETUP .............................................…

Text truncated - open the document above for the full version.

FCCID:2BW8G-SN-SZ08B ConductedEmissions RadiatedSpuriousEmissions From30MHz-1000MHz FCCID:2BW8G-SN-SZ08B TestfrequencyfromAbove1GHz