2BW9T-AMOS-03AMOS TastySounds Wireless Audio Lollipop with BT

AMOS SWEETS INC. Rev 1/26/2023 To: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 08/11/2026 Ref: Attestation Statements Part 2.911(d)(7) Filing FCC ID: 2BW9T-AMOS-03 [AMOS SWEETS INC.] (“the applicant”) certifies that, as of the date of the filing of the application, (AMOS SWEETS INC.) is our designated U.S. agent for service of process for the above referenced FCC ID. [AMOS SWEETS INC.] accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. (AMOS SWEETS INC.) accepts, as of the date of the filing of the application, the obligation of the designated U.S. agent for service of process for the above referenced FCC ID. Designated U.S. Agent Information: Name: AMOS SWEETS INC. Address: 732 S 6TH ST, STE R, LAS VEGAS, NEVADA, USA Contact Person: Harry Hai Tel.: +86 0755-33916888 extend 8008 Email: [email protected] FRN: 0038674925 Sincerely, [Insert U.S. agent company name] AMOS SWEETS INC. (U.S. agent company name printed name) Harry Hai (U.S. agent company name signature) [Insert applicant name] AMOS SWEETS INC. (Applicant printed name) Harry Hai (Applicant signature)

1、Label content and size： 2、Label Position:

Project No.: ZKT-260730L2046E-2 Page 1 of 8 RF EXPOSURE EVALUATION FCC ID:2BW9T-AMOS-03 Report Number. .............................. : ZKT-260730L2046E-2 Date of Test ......................................... July. 11, 2026 to Aug. 03, 2026 Date of issue ..................................... : Aug. 03, 2026 Total number of pages ....................... 8 Test Result ...................................... : PASS Testing Laboratory. ........................ : Shenzhen ZKT Technology Co., Ltd. Address ........................................... : 1/F, No. 101, Building B, No. 6, Tangwei Community Industrial Avenue, Fuhai Street, Bao'an District, Shenzhen, China Applicant's name ......................... : AMOS SWEETS INC. Address ........................................... : 732 S 6TH ST, STE R, LAS VEGAS, NEVADA, USA Manufacturer's name ................... : AMOS SWEETS INC. Address ........................................... : 732 S 6TH ST, STE R, LAS VEGAS, NEVADA, USA Test specification: Standard ........................................... : FCC 47CFR §2.1091 KDB 447498 D01 General RF Exposure Guidance v06 Test procedure ................................. : / Non-standard test method .............. : N/A Test Report Form No. .................... : TRF-EL-112_V0 Test Report Form(s) Originator .... : ZKT Testing Master TRF ................................... : Dated: 2021-04-22 This device described above has been tested by ZKT, and the test results show that the equipment under test (EUT) is in compliance with the FCC requirements. And it is applicable only to the tested sample identified in the report. This report shall not be reproduced except in full, without the written approval of ZKT, this document may be altered or revised by ZKT, personal only, and shall be noted in the revision of the document. Product name ................................. : AMOS TastySounds Wireless Audio Lollipop Trademark ....................................... : AMOS Model/Type reference ....................... : AMOS-03 Ratings .............................................. : Input: DC 5V Project No.: ZKT-260730L2046E-2 Page 2 of 8 Testing procedure and testing location: Testing Laboratory ..................................... : Shenzhen ZKT Technology Co., Ltd. Address ...................................................... :1/F, No. 101, Building B, No. 6, Tangwei Community Industrial Avenue, Fuhai Street, Bao'an District, Shenzhen, China Jim Liu Tested by (name + signature) .................... : Jackson Fang Reviewer (name + signature) ..................... : Lake Xie Approved (name + signature) .................... : Project No.: ZKT-260730L2046E-2 Page 3 of 8 Table of Contents Page 1. VERSION ............................................................... 4 2. TEST FACILITY .......................................................... 5 3.GENERAL DESCRIPTION OF EUT ......................................... 6 Project No.: ZKT-260730L2046E-2 Page 4 of 8 1. Version Report No. Version Description Approved ZKT-260730L2046E-2 Rev.01 Initial issue of report Aug. 03, 2026 Project No.: ZKT-260730L2046E-2 Page 5 of 8 2. TEST FACILITY Shenzhen ZKT Technology Co., Ltd. Add. : 1/F, No. 101, Building B, No. 6, Tangwei Community Industrial Avenue, Fuhai Street, Bao'an District, Shenzhen, China FCC Test Firm Registration Number: 927491 Designation Number: CN1431 IC Registered No.: 27033 CAB identifier: CN0110 Project No.: ZKT-260730L2046E-2 Page 6 of 8 3.GENERAL DESCRIPTION OF EUT Product Name: AMOS TastySounds Wireless Audio Lollipop Trade Mark: AMOS Model No.: AMOS-03 Serial No.: N/A Model Different.: N/A Hardware Version: V2.2 Software Version: V1 Sample(s) Status: Engineer sample Sample Number: ZKT-260730L2046 Channel numbers: 79 Operation Frequency: 2402MHz~2480MHz Modulation technology: GFSK, π/4-DQPSK, 8DPSK(3Mbps) Antenna Type: SMD Antenna gain: 2.7dBi Power Supply: Input: DC 5V Battery Capacity: Model: 400930 Brand: N/A Rated Voltage: 3.7V Capacity: 80mAh Note1: For a more detailed features description, please refer to the manufacturer’s specifications or the User's Manual. Note2: The EUT's all information provided by client. Project No.: ZKT-260730L2046E-2 Page 7 of 8 According to KDB 447498 D01 General RF Exposure Guidance v06 and part 2.1093, Unless specifically required by the published RF exposure KDB procedures, standalone 1-g head or body and 10-g extremity SAR evaluation for general population exposure conditions, by measurement or numerical simulation, is not required when the corresponding SAR Test Exclusion Threshold condition(s), listed below, is (are) satisfied. For 100 MHz to 6 GHz and test separation distances ≤ 50 mm, the 1-g and 10-g SAR test exclusion thresholds are determined by the following: [(max. power of channel, including tune-up tolerance, mW) / (min. test separation distance, mm)] * [√f (GHz) ] ≤ 3.0 for 1-g SAR, and ≤ 7.5 for 10-g extremity SAR, where f (GHz) is the RF channel transmit frequency in GHz Power and distance are rounded to the nearest mW and mm before calculation The result is rounded to one decimal place for comparison Project No.: ZKT-260730L2046E-2 Page 8 of 8 Here, For BLE RF Function output power (dBm) Max Tune Up Power (dBm) Max Tune Up Power (dBm) BT -3.95 -4±1 -3 Mode Frequency Antenna Distance RF output power including tune up (dBm) SAR Test Exclusion Threshold SAR Test Exclusion Estimated SAR GHz mm dBm mw 8DPSK(BT) 2.48 5 -3 0.501 0.158 Yes / Conclusion: 1. [(max. power of channel, including tune-up tolerance, mW) / (min. test separation distance, mm)] * [√f(GHz)] < 3.0. 2. SAR Test Exclusion Thresholds is 3.0 for separation distance 5mm. Therefore, SAR test is not required.

2.4GHz 3216 Chip Antenna: RANT1206F245S5 _ Application: WLAN,802.11b/g,Bluetooth,WLAN,etc... Features SMD,highreliability,ultraImpact,Omni-directional... PartnumberInformation RANT1206F245S (A)(B)(C)(D)(E) ElectricalSpecificatio 5 (F) n DimensionandTerminalConfiguration No.TerminalName 1Feeding/GNG 2GND/Feeding (A)ProductTypeChipAntenna (B)SizeCode 3.2x1.6mm( ± 0.1mm) (C)MaterialHighKmaterial (D)Frequency2.4~2.5GHz (E)FeedingmodePIFA&SingleFeeding (F)AntennatypeType=7 WorkingFrequencyRange2400~2500MHz Bandwidth120MHz(Min.) PeakGain2.7dBi(Typ.) Impedance50Ohm Returnloss10dB(Min) PolarizationLinear AzimuthBeamwidthOmni-directional OperationTemperature(°C)-40~85°C ResistancetoSolderingHeats 10sec.(@280°C) TerminationNi/Au(Leadless) Dimension(mm) L W T 3.20±0.10 1.60±0.10 0.45±0.10 咏成國際科技有限公司 RAIN International Technology Co., Ltd. 電話 :13530576606 TEL: 13530576606 Building A, Ruite Science Park, Guwu District, Shenzhen City 2.4GHz 3216 Chip Antenna: RANT1206F245S5 _ 1 EvaluationBoardReference PCBDimensionUnit:mm ReturnLoss&Radiation 1206 1206 2.4GHz 3216 Chip Antenna: RANT1206F245S5 _ 2.4GHz 3216 Chip Antenna: RANT1206F245S5 _ TapingSpecifications ReelandTapingSpecification ReelSpecification TYPESIZEABCD 16087”4K/Reel 4.0±0.5 4.0±213.5±0.5178±2 TappingSpecification PackagingTypeABWEFGHTψDP PaperType1608 1.90±0.203.50±0.208.0±0.201.75±0.103.5±0.054.0±0.102.0±0.050.75±0.10 1.50±0.10 4.0±0.1 _ 2.4GHz 3216 Chip Antenna: RANT1206F245S5 Reliability Table TestItemProcedure Requirements CeramicType Remark (Reference) Electrical Characterization Fulfilltheelectrical specification UserSpec. Thermal Shock 1.Preconditioning: 50±10°C/1hr,thenkeepfor24±1hrsatroomtemp. 2.Initialmeasure:Spec:referInitialspec. 3.Rapidchangeoftemperaturetest: -30°Cto+85°C;100cycles; 15minutesatLowercategorytemperature; 15minutesatUppercategorytemperature. NoVisibleDamage. Fulfilltheelectrical specification. MIL-STD-202 107 Temperature Cycling 1.Initialmeasure:Spec:referInitialspec. 2.100Cycles(-30°Cto+85°C),SoakMode=1(2Cycle/hours). 3.Measurementat24±2Hoursaftertestcondition. NoVisibleDamage. Fulfilltheelectrical specification. JESD22 JA104 HighTemperature Exposure 1.Initialmeasure:Spec:referInitialspec. 2.Unpowered;500hours@T=+85°C. 3.Measurementat24±2hoursaftertest. NoVisibleDamage. Fulfilltheelectrical specification. MIL-STD-202 108 LowTemperature Storage 1.Initialmeasure:Spec:referInitialspec. 2.Unpowered:500hours@T=-30°C. 3.Measurementat24±2hoursaftertest. NoVisibleDamage. Fulfilltheelectrical specification. MIL-STD-202 108 Solderability (SMDBottomSide) Dippingmethod: a.Temperature:235±5°C b.Dippingtime:3±0.5s Thesoldershouldcover over95%ofthecritical areaofbottomside. IEC60384-21/22 4.10 SolderingHeat Resistance (RSH) Preheatingtemperature:150±10°C. Preheatingtime:1~2min. Soldertemperature:260±5°C. Dippingtime:5±0.5s NoVisibleDamage.IEC60384-21/22 4.10 Vibration5g'sfor20min.,12cycleseachof3orientations Note:Use8"X5"PCB.031"thick7securepointson,onelong sideand2securepointsatcornersofoppositesides.Parts mountedwithin2"fromanysecurepoint.Testfrom10-2000 Hz. NoVisibleDamage.MIL-STD-202 Method204 Mechanical Shock Threeshocksineachdirectionshallbeappliedalongthethree mutuallyperpendicularaxesofthetestspecimen(18shocks) Peakvalue:1,500g’s Duration:0.5ms Velocitychange:15.4ft/s Waveform:Half-sine NoVisibleDamage.MIL-STD-202 Method213 Humidity Bias 1.Humidity:85%R.H.,Temperature:85±2°C. 2.Time:500±24hours. 3.Measurementat24±2hrsaftertestcondition. NoVisibleDamage. Fulfilltheelectrical specification. MIL-STD-202 Method106 2.4GHz 1206 Chip Antenna: RANT1206F245S5 _ Board Flex (SMD) 1.Mountingmethod: IR-Reflow.PCBSize(L:100×W:40×T:1.6mm) 2.Applytheloadindirectionofthearrowuntilbendingreaches 2mm. NoVisibleDamage.AEC-Q200 005 AdhesionForceof1.8Kgfor60seconds.NoVisibleDamage Magnificationof20Xor greatermaybeemployed forinspectionofthe mechanicalintegrityofthe devicebodyterminalsand body/terminaljunction. AEC-Q200 006 Physical Dimension Anyapplicablemethodusingx10magnification,micrometers, calipers,gauges,contourprojectors,orothermeasuring equipment,capableofdeterminingtheactualspecimen dimensions. Inaccordancewith specification. JESD22 JB100 RevisionHistory RevisionDateContent 12019/03/01NewDatasheet 22020/02/22Add2Dradiationcharacteristic

Project No.: ZKT-260730L2046E-1 Page 1 of 140 FCC Part 15CTest Report FCC ID:2BW9T-AMOS-03 Report Number. .............................. : ZKT-260730L2046E-1 Date of Test .........................................July 11, 2026 to Aug. 03, 2026 Date of issue ..................................... : Aug. 03, 2026 Total number of pages ....................... 140 Test Result ...................................... : PASS Testing Laboratory. ........................ : Shenzhen ZKT Technology Co., Ltd. Address ........................................... : 1/F, No. 101, Building B, No. 6, Tangwei Community Industrial Avenue, Fuhai Street, Bao'an District, Shenzhen, China Applicant's name ......................... : AMOS SWEETS INC. Address ........................................... : 732 S 6TH ST, STE R, LAS VEGAS, NEVADA, USA Manufacturer's name ................... : AMOS SWEETS INC. Address ........................................... : 732 S 6TH ST, STE R, LAS VEGAS, NEVADA, USA Test specification: Standard ........................................... : FCC CFR Title 47 Part 15 Subpart C Section 15.247 ANSI C63.10-2020+Cor 1-2023 Test procedure ................................. : / Non-standard test method .............. : N/A Test Report Form No. .................... : TRF-EL-112_V0 Test Report Form(s) Originator .... : ZKT Testing Master TRF ................................... : Dated: 2021-04-22 This device described above has been tested by ZKT, and the test results show that the equipment under test (EUT) is in compliance with the FCC requirements. And it is applicable only to the tested sample identified in the report. This report shall not be reproduced except in full, without the written approval of ZKT, this document may be altered or revised by ZKT, personal only, and shall be noted in the revision of the document. Product name ................................. : AMOS TastySounds Wireless Audio Lollipop Trademark ....................................... : AMOS Model/Type reference ....................... : AMOS-03 Ratings .............................................. : Input: DC 5V Project No.: ZKT-260730L2046E-1 Page 2 of 140 Testing procedure and testing location: Testing Laboratory ..................................... :Shenzhen ZKT Technology Co., Ltd. Address ...................................................... :1/F, No. 101, Building B, No. 6, Tangwei Community Industrial Avenue, Fuhai Street, Bao'an District, Shenzhen, China Jim Liu Tested by (name + signature) .................... : Jackson Fang Reviewer (name + signature) ..................... : Lake Xie Approved (name + signature) .................... : Project No.: ZKT-260730L2046E-1 Page 3 of 140 Table of Contents Page 1. VERSION ............................................................... 5 2. TEST SUMMARY ........................................................ 6 2.1 TEST FACILITY ......................................................... 7 2.2 MEASUREMENT UNCERTAINTY ......................................... 7 3. GENERAL INFORMATION ................................................ 8 3.1 GENERAL DESCRIPTION OF EUT ........................................ 8 3.2 Test Setup Configuration ................................................. 10 3.3 Support Equipment ...................................................... 10 3.4 Test Mode ............................................................. 11 3.5 EQUIPMENTS LIST FOR ALL TEST ITEMS ................................ 12 4. EMC EMISSION TEST ................................................... 14 4.1 Conducted emissions .................................................... 14 4.1.1 POWER LINE CONDUCTED EMISSION Limits ........................... 14 4.1.2 TEST PROCEDURE ................................................... 14 4.1.3 DEVIATION FROM TEST STANDARD ................................... 14 4.1.4 TEST SETUP ......................................................... 15 4.1.5 EUT OPERATING CONDITIONS ........................................ 15 4.1.6 Test Result ........................................................... 16 4.2 Radiated emissions ..................................................... 18 4.2.1 Radiated Emission Limits ............................................... 18 4.2.2 TEST PROCEDURE ................................................... 18 4.2.3 DEVIATION FROM TEST STANDARD ................................... 19 4.2.4 TEST SETUP ......................................................... 19 4.2.5 EUT OPERATING CONDITIONS ........................................ 20 4.2.6 TEST RESULTS ...................................................... 21 5. EMISSIONS AT RESTRICTED BAND ..................................... 63 5.1 Test Requirement: ...................................................... 63 5.2 TEST PROCEDURE .................................................... 63 5.3 DEVIATION FROM TEST STANDARD .................................... 64 5.4 TEST SETUP .......................................................... 64 5.5 TEST RESULT ......................................................... 64 6. CONDUCTED BAND EDGE AND SPURIOUS EMISSION .................... 65 6.1 Limit ................................................................... 65 6.2 Test Setup ............................................................. 65 6.3 Test procedure ......................................................... 65 6.4 DEVIATION FROM STANDARD .......................................... 65 6.5 Test Result ............................................................. 65 7. 20DB BANDWIDTH ..................................................... 66 7.1 Test Setup ............................................................. 66 7.2 Limit ................................................................... 66 7.3 Test procedure ......................................................... 66 7.4 DEVIATION FROM STANDARD .......................................... 66 7.5 Test Result .................…

Text truncated - open the document above for the full version.