2BWEV-C17Magnetic Wireless Car Charger with TEC Cooling

Rev 1/26/2023 Shenzhen Weilai Shenniao Technology Co., Ltd. Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: June 29, 2026 Ref: Attestation Statements Part 2.911(d)(5)(i) Filing FCC ID: 2BWEV-C17 [Shenzhen Weilai Shenniao Technology Co., Ltd.] certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. [Shenzhen Weilai Shenniao Technology Co., Ltd.] certifies that the equipment for which authorization is sought does not include cybersecurity or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors and assignees, including equipment with integrated Kaspersky Lab, Inc. (or any of its successors and assignees) cybersecurity or anti-virus software pursuant to DA-24-886 and KDB 986446 D01 Covered Equipment Guidance section B(2a). Device is inherently compliant based on hardware limitations or software controls. or A Software Bill of Materials (SBOM) is provided to the TCB for review, and The end-user or third parties cannot install additional software on this device. Sincerely, (Applicant signature) (Applicant printed name) honglin liu Rev 1/26/2023 Shenzhen Weilai Shenniao Technology Co., Ltd. Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: June 29, 2026 Ref: Attestation Statements Part 2.911(d)(5)(ii) Filing FCC ID: 2BWEV-C17 [Shenzhen Weilai Shenniao Technology Co., Ltd.] certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Sincerely, (Applicant signature) (Applicant printed name) honglin liu

Shenzhen Weilai Shenniao Technology Co., Ltd. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: July 6, 2026 Subject; Request for Confidentiality FCC ID: 2BWEV-C17 To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure Software Security Requirements for UNII devices In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: honglin liu Title: manager

Effective Date: April 2, 2020 QSF 7.6.4-8 – Agent Authorization Letter Template Page 1 of 1 Revision Date: Revision: 0 Shenzhen Weilai Shenniao Technology Co., Ltd. Date: June 29, 2026 Product Model Number: C17 FCC ID: 2BWEV-C17 To whom it may concern, Re: Product Certification Representative Authorization Letter We authorize QAI Laboratories Ltd. 3980 North Fraser Way, Burnaby B.C. Canada V5J 5K5 to act on our behalf on all matters concerning the above named equipment. This shall include the following:  Testing  Approval applications and procedures We declare that QAI Laboratories Ltd. is allowed to forward all information related to the approval project to the applied certification body and to the notification entities and to discuss any issues concerning the approval application. Any and all acts carried out by QAI Laboratories Ltd. on our behalf shall have the same effect as acts of our own. By: Contact Listed on FCC Wesbite Title: manager Email: [email protected] Telephone: 18575502206 On behalf of: Shenzhen Weilai Shenniao Technology Co., Ltd.

Ext Photos Model: C17 Photo 1 Photo 2 Photo 3 Photo 4 Photo 5 Photo 6 Photo 7 Photo 8

Parameter color: Black version - Pantone 480c Gold version - Pantone 480c

Int Photos Model: C17 Photo 1 Photo 2 ANT Photo 3 Photo 4

- Page 1 of 11 - Report No.: HB20260601002E-02 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com RF EXPOSURE Test Report Product: Magnetic Wireless Car Charger with TEC Cooling Trade Mark: miisso Model Number: C17 FCC ID: 2BWEV-C17 Prepared for Shenzhen Weilai Shenniao Technology Co., Ltd. 1301, Building C, Excellence Baozhong Times Square Phase II. Bao'an District, Shenzhen Prepared by Shenzhen HongBiao Certification& Testing Co., Ltd Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen, China Tel.: +86-755-2998 9321 Fax.: +86-755-2998 5110 Website: http://www.sz-hongbiao.com - Page 2 of 11 - Report No.: HB20260601002E-02 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com Table of Contents 1 GENERAL DESCRIPTION ..................................................................................................................................... 5 1.1 DESCRIPTION OF EUT ................................................................................................................................................ 5 1.2 TEST MODE .............................................................................................................................................................. 5 1.3 TEST SETUP .............................................................................................................................................................. 5 1.4 ANCILLARY EQUIPMENT .............................................................................................................................................. 5 2 TEST FACILITIES AND ACCREDITATIONS .............................................................................................................. 6 2.1 TEST LABORATORY ..................................................................................................................................................... 6 2.2 ENVIRONMENTAL CONDITIONS ..................................................................................................................................... 6 2.3 MEASUREMENT UNCERTAINTY ..................................................................................................................................... 6 2.4 TEST SOFTWARE ........................................................................................................................................................ 6 3 LIST OF TEST EQUIPMENT .................................................................................................................................. 7 4 RF EXPOSURE..................................................................................................................................................... 8 4.1 MAXIMUM PERMISSIBLE EXPOSURE .............................................................................................................................. 8 4.1.1. Limit ............................................................................................................................................................ 8 4.1.2. Test Procedures ........................................................................................................................................... 8 4.1.3. Test Setup .................................................................................................................................................... 8 4.1.4. Test Result ................................................................................................................................................... 8 5 PHOTOGRAPHS OF THE TEST SETUP ..................................................................................................................11 - Page 3 of 11 - Report No.: HB20260601002E-02 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com TEST RESULT CERTIFICATION Applicant’s Name ................. : Shenzhen Weilai Shenniao Technology Co., Ltd. Address ................................. : 1301, Building C, Excellence Baozhong Times Square Phase II. Bao'an District, Shenzhen Manufacturer's Name .......... : Shenzhen Weilai Shenniao Technology Co., Ltd. Address ................................. : 1301, Building C, Excellence Baozhong Times Square Phase II. Bao'an District, Shenzhen Product description Product name ........................ : Magnetic Wireless Car Charger with TEC Cooling Model Number ....................... : C17 Standards ............................. : FCC CFR 47 PART 1 , 1.1310 Test procedure ....................... : KDB 680106 D01 Wireless Power Transfer v04 This device described above has been tested by Shenzhen HongBiao Certification& Testing Co., Ltd and the test results show that the equipment under test (EUT) is in compliance with the EMC requirements. And it is applicable only to the tested sample identified in the report. Date of Test ........................................... : Date (s) of performance of tests ............. : June 01, 2026~June 29, 2026 Test Result .............................................. : Pass Testing Engineer : ( Z o e Su) Technical Manager : (M i n g L i u) Authorized Signatory : (L e o S u) - Page 4 of 11 - Report No.: HB20260601002E-02 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com Revision History Revised No. Da…

Text truncated - open the document above for the full version.

Shenzhen Chenxing Electronic Technology Co., Ltd. Company Name: Shenzhen Chenxing Electronic Technology Co., Ltd. Factory Address: Building 1, New Kecheng Science and Technology Industrial Park, No. 51 Daobao Road, Xin'an Street, Bao'an District, Shenzhen City 产 品 规 格 书 PRODU CT SPECIFICATION FOR APPROVAL 客 户 名 称： CUSTOMER Mingjing Tian 产 品 名 称： PRODUCT NAME transmitting coil 物 料 编 码： PART No. 产 品 规 格： PRODUCT SPEC Measurement specification: 8.1uH ± 10% Magnetic sheet specification: 43.5*5.3*0.8 dual slots + 15*0.8 small round piece Wire specification: Enamel wire 0.08*80*11Ts (inner diameter 21.8mm/outer diameter 39.3mm) Output wire length: 10mm 8mm heat-resistant tape / ordinary adhesive (44*22) 日期： DATE September 24, 2024 版 本 型 号： VERSION REV 1.0 版本 Revision 变更内容 Modi fied Content 责任人 Principle 日期 Date 备注 Note REV 1.0 first releaseXue Lei 2024-09-24 制定/P REPARED BY审核/C HECKED BY核准/A PPROVED BY 客户认可签名及盖章 Aut horized signatur e & compa ny chop 产 品 规 格 SPECIFICATION 一、product size Disk diameter A 43.5±0.5mm Outer diameter of the coil B 39.3±1mm Inner diameter of the coil C Product thickness 21.8±0.5mm D Outlining length <2.2mm E Welding rod length 8mm±2mm F 3±1mm Diameter of the opening on the magnetic disk G 5±0.3mm Disk thickness 0.8±0.05mm Disk shape Circular double groove High-temperature adhesive tape width 8mm Backsheet thickness Regular double-sided adhesive tape （44*22） Small magnetic spacer plate 15*0.8 Regular double-sided adhesive tape Shenzhen Chenxing Electronic Technology Co., Ltd. Small magnetic spacer plate 二、schematic diagram 三、Winding parameters 端子 TERMINAL 线径 WIRE 圈数 Turns 绕线方向 Winding Direction SF Enamel-coated wire, 0.08 * 80P 11TsCCW 四、电气特性： 温度TEMPERATURE:25±10°C,湿度RELATIVE HUMIDITY:65±20% 项目 ITEM 端子 TERMINAL 标准 SPECIFICATION 测试条件 TEST FREQUENCY 测试仪器 TEST EQUIPMENTS IND.S-F 8.1uH±10% 100KHz/1.0VLCZ METER 1062B 五、 Product physical picture Shenzhen Chenxing Electronic Technology Co., Ltd.

- Page 1 of 28 - Report No.: HB20260601002E-01 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com Test Report Product: Magnetic Wireless Car Charger with TEC Cooling Trade Mark: miisso Model Number: C17 FCC ID: 2BWEV-C17 Prepared for Shenzhen Weilai Shenniao Technology Co., Ltd. 1301, Building C, Excellence Baozhong Times Square Phase II. Bao'an District, Shenzhen Prepared by Shenzhen HongBiao Certification& Testing Co., Ltd Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen, China Tel.: +86-755-2998 9321 Fax.: +86-755-2998 5110 Website: http://www.sz-hongbiao.com - Page 2 of 28 - Report No.: HB20260601002E-01 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com Table of Contents 1 GENERAL DESCRIPTION ..................................................................................................................................... 5 1.1 DESCRIPTION OF EUT ................................................................................................................................................ 5 1.2 TEST MODE .............................................................................................................................................................. 5 1.3 TEST SETUP .............................................................................................................................................................. 6 1.4 POWER SETTING CONFIGURATION PARAMETERS ............................................................................................................... 6 1.5 ANCILLARY EQUIPMENT .............................................................................................................................................. 6 2 SUMMARY OF TEST RESULT ............................................................................................................................... 7 3 TEST FACILITIES AND ACCREDITATIONS .............................................................................................................. 8 3.1 TEST LABORATORY ..................................................................................................................................................... 8 3.2 ENVIRONMENTAL CONDITIONS ..................................................................................................................................... 8 3.3 MEASUREMENT UNCERTAINTY ..................................................................................................................................... 8 3.4 TEST SOFTWARE ........................................................................................................................................................ 9 4 LIST OF TEST EQUIPMENT .................................................................................................................................10 5 TEST ITEM AND RESULTS ...................................................................................................................................12 5.1 ANTENNA REQUIREMENT .......................................................................................................................................... 12 5.2 CONDUCTED EMISSION ............................................................................................................................................. 13 5.3 RADIATED EMISSION ................................................................................................................................................ 15 5.4 OCCUPIED BANDWIDTH ............................................................................................................................................ 20 6 PHOTOGRAPHS OF THE TEST SETUP ..................................................................................................................22 7 PHOTOGRAPHS OF THE EUT..............................................................................................................................23 - Page 3 of 28 - Report No.: HB20260601002E-01 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com TEST RESULT CERTIFICATION Applicant’s Name ................. : Shenzhen Weilai Shenniao Technology Co., Ltd. Address ................................. : 1301, Building C, Excellence Baozhong Times Square Phase II. Bao'an District, Shenzhen Manufacturer's Name .......... : Shenzhen Weilai Shenniao Technology Co., Ltd. Address ................................. : 1301, Building C, Excellence Baozhong Times Square Phase II. Bao'an District, Shenzhen Product description Product name ........................ : Magnetic Wireless Car Charger with TEC Cooling Model Number ....................... : C17 Standards ............................. : FCC Part 15C Test procedure ....................... : IEEE/ANSI C63.10-2020+Cor. 1-2023 This device described above has been tested by Shenzhen HongBiao Certification& Testing Co., Ltd and the test results show that the equipment under test (EUT) is in compliance with the EMC requirements. And it is applicable only to the tested sample identified in the report. Date of Test ........................................... : Date (s) of performance of tests ............. : June 01, 2026~June 29, 2026 Test Result .............................................. : Pass Testing Engineer : ( Z o e Su) Technical Manager : (M i n g Liu) Authorized Signatory : (L e o S u) - Page 4 of 28 - Report No.: HB20260601002E…

Text truncated - open the document above for the full version.

Photographs of the Test Setup Model: C17 Radiated Emission Below 30MHz Radiated Emission Above 30MHz MPE