2BWGR-APF030405Automatic Pet Feeder

TCB CALL página 1 File FCC ID: 2BWGR-APF030405 Please upload an exhibit that explains how does the TCB verify the new agent information: 1- Is the address of the agent a valid physical US mailing address (not a US post office box, not a virtual mailbox, not P.O. Boxes, not a vacant lot, not a public building, etc.) ○ We have checked if the address exists in a real and potential building (Google maps) + official US register, after this verification and the evidence below we can guarantee the following: not a US post office box not a virtual mailbox not P.O. Boxes not a vacant lot not a public building(note) ► We checked the FCC FRN Search based on the information provided by the grantee. On the official register from : https://apps.dos.ny.gov/publicInquiry/EntityDisplay Google: TCB CALL página 2 State of New York department of State: TCB CALL página 3 TCB CALL página 4 ► CONCLUSION by TCB: The ASOP defined and provided by grantee is VALID and confirmed. Therefore the exhibit "C5266091_X23_Ed1_US_Agent_Letter" included in the file is ok. 2- Is the agent physically located at that valid US address such that the agent can be legally served at that address? Yes , check above 3- Has the listed agent clearly agreed in writing to serve as the agent for the grantee at that address? Yes, it is included in the exhibit "C5266091_X23_Ed1_US_Agent_Letter"

ShenzhenHaidegeTechnologyCo.,Ltd ReferenceNo.2026UL0254 2.911(d)(7)USAAgentv1.3 Section2.911(d)(7)USAAgentforServiceofProcess Companyname:ShenzhenHaidegeTechnologyCo.,Ltd FCCID:2BWGR-APF030405 ContactName:GuangzhengJi Address:13A13,No.51,PingxinNorthRd.,ShangmuguComm.,PinghuSt., LonggangDist.,Shenzhen,CHINA TelephoneNo:13829160136 Email:[email protected] 2.911(d)(7)USADesignatedAgentforServiceofProcess We,[ShenzhenHaidegeTechnologyCo.,Ltd](“theapplicant”)designate[TTS MARKETINC.] NOTE1 forthepurposeofacceptingserviceofprocessonbehalfofthe applicant. Applicantconsent:WeAcknowledgeourconsenttoacceptserviceofprocessinthe UnitedStatesformattersrelatedtotheapplicableequipment,andatthephysicalU.S. addressandemailaddressofthedesignatedagentandacknowledgeour acceptanceofourobligationtomaintainanagentforserviceofprocessintheUnited Statesfornolessthanoneyearaftereitherthegranteehaspermanentlyterminated allmarketingandimportationoftheapplicableequipmentwithintheU.S.,orthe conclusionofanyCommission-relatedadministrativeorjudicialproceedinginvolving theequipment,whicheverislater. Agentobligation:WeAcknowledgeourobligationtoacceptserviceofprocessinthe UnitedStatesformattersrelatedtotheapplicableequipmentatourphysicalU.S. addressandemailaddressfornolessthanoneyearaftereitherthegranteehas permanentlyterminatedallmarketingandimportationoftheapplicableequipment withintheU.S.,ortheconclusionofanyCommission-relatedadministrativeorjudicial proceedinginvolvingtheequipment,whicheverislater. USAAgent Companyname:TTSMARKETINC. Address:1178BroadwaySte324,NewYork, NY10001,USA FRN:0036806057 ContactName:MaverickLim TelephoneNo: ： 001-(646)305-2908 Email:[email protected] Applicant Companyname:ShenzhenHaidege TechnologyCo.,Ltd Address:13A13,No.51,PingxinNorth Rd.,ShangmuguComm.,PinghuSt., LonggangDist.,Shenzhen,CHINA FCCRegistrationNumber(FRN): 13829160136 FCCGranteeCode:2BWGR ShenzhenHaidegeTechnologyCo.,Ltd ReferenceNo.2026UL0254 2.911(d)(7)USAAgentv1.3 ContactName:GuangzhengJi TelephoneNo:13829160136 Email:[email protected] Signature: Title:Manager Signature: Title:Manager Date:2026.08.20Date:2026.08.20 NOTE1:AnapplicantlocatedintheUnitedStatesmaydesignateitselfastheagentforservice ofprocess. Reference;FederalRegisterdocument2022-28263publishedon02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-nation al-security-threats-to-the-communications-supply-chain-through-the

Attestation Statement. Old Code: C5266091 24 New Code: 00015544 Ed.3 Change reason: FRN is added to the Applicant information section. 1/1 TO: Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 The Commission adopted rules that prohibit equipment authorization for “covered” telecommunications equipment and video surveillance equipment produced by entities identified on the Commission’s Covered List 1 , which is periodically updated. See the Covered List for more details. This Attestation Statement is to confirm that we follow the Section 2.911(d)(5)(i)-(ii) Applicant Company name: Shenzhen Haidege Technology Co., Ltd Grantee code: 2BWGR FCC ID: 2BWGR-APF030405 FRN: 0038500997 Contact Name: Guangzheng Ji Address: 13A13, No. 51, Pingxin North Rd., Shangmugu Comm., Pinghu St., Longgang Dist.,Shenzhen,CHINA Fax No: 13829160136 Email: [email protected] i. [Shenzhen Haidege Technology Co., Ltd] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. The applicant must sign this certification. ii. [Shenzhen Haidege Technology Co., Ltd] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant [is not] (as a specifically named entity or any of its subsidiaries or affiliates) identified on the Covered List as an entity producing “covered” equipment. The applicant must sign this certification. [Shenzhen Haidege Technology Co., Ltd] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant [is not] identified on the Covered List as an entity producing “covered” equipment . Date: 2026/08/13 Applicant’s Name: Guangzheng Ji Title: Manager Signature The Commission’s Covered List is published by the Public Safety and Homeland Security Bureau and posted on the Commission’s website. This Covered List, which is periodically updated, identifies particular equipment, produced by particular entities, that constitutes “covered” equipment. https://www.fcc.gov/supplychain/coveredlist

Shenzhen Haidege Technology Co., Ltd Code 00018768 Ed. 1 Device Automatic Pet Feeder Company name Shenzhen Haidege Technology Co., Ltd Grantee code 2BWGR FCC ID 2BWGR-APF030405 FRN 0038500997 Contact name Guangzheng Ji Address 13A13, No. 51, Pingxin North Rd., Shangmugu Comm., Pinghu St., Longgang Dist.,Shenzhen,CHINA Telephone number 13829160136 E-mail [email protected] Chipset/module information Chip: RTL8720DN-48P Crystal Oscillator:40MHz Operating System (if applicable) N/A Storage Capacity (hard drive or other permanent memory storage, if applicable) N/A 2 Item 1. The device is able to install software/program installation? ☐ Yes, go to Item 2. ☒ No. In this case, the rest of the items do not apply. The device cannot support installation of Kaspersky cybersecurity or anti-virus software. Item 2. Technical Requirements for Kaspersky Cybersecurity Software: # General Requirements (For all Devices) Yes / No or N/A Comments 1 Internet connection for activation and updates (For all Operating Systems) N/A # General Requirements (For Windows Devices) Yes / No or N/A Comments 1 Storage: 1500 MB free space on the hard drive N/A 2 Operating System: Microsoft Windows 8, 8.1, 10 & 11 Home / Pro / Enterprise Microsoft Windows 7 Starter / Home Basic & Premium / Professional / Ultimate SP1 or higher N/A 3 Processor: 1 GHz or higher (P846 or x64) N/A 4 Memory (RAM)1 GB (32-bit) or 2 GB (64-bit) N/A 5 Screen Resolution: Minimum resolution of 1024 x 768 N/A # General Requirements (For macOS devices) Yes / No or N/A Comments 1 Operating System macOS® 13 – 14 N/A 2 Memory (RAM)4 GB N/A 3 Storage: 3455 MB free space on the hard drive N/A 3 # General Requirements (For Android Devices) Yes / No or N/A Comments 1 Storage: 150 MB free space N/A 2 Operating System: Android™ 10 – 14 N/A 3 Screen Resolution: Minimum resolution of 320 x 480 N/A # General Requirements (for iOS devices) Yes / No or N/A Comments 1 Storage: 150 MB free space N/A 2 Operating System: iOS® 17 N/A # General Requirements (For Linux system) Yes / No or N/A Comments 1 Hard drive: 1 GB of free space N/A 2 CPU: Intel Pentium 1 GHz or higher N/A 3 RAM: 1 GB N/A 4 Minimum software requirements: AlmaLinux OS 8 or later; AlterOS 7.5 or later; Astra Linux Common Edition 2.12 or later; CentOS 6.7 or later; Debian GNU/Linux 10.0 or later; EulerOS 2.0 or later; Oracle Linux 7.3 or later ; Red Hat Enterprise Linux 6.7 or later ; Rocky Linux 8.5 or later ; N/A 4 SUSE Linux Enterprise Server 12.5 or later; Ubuntu 12.04 or later ; Uncom OS Home / Business / Education / Enterprise 2.2 or later; ALT Linux Workstaton / Workstation K / Server / Education 8 or later; ROSA Linux Workstation / Server 12 or later ; RED OS 7.3 and later ; After reviewed the technical requirements, is the device capable of supporting the installation of Kaspersky software? ☐ Yes, go to Item 3. ☒ No. In this case, the rest of the items do not apply. The device cannot support installation of Kaspersky software Item 3. Connectivity Capabilities: # Physical Interface Purpose Justification 1 1 # Wireless Interface Purpose Justification 1 1 After the review of this items, the device: ☒ Cannot support installation of any cybersecurity or anti-virus software on the covered list. ☐ Potentially can operate with any cybersecurity or anti-virus software on the covered list – additional third-party proof is provided to demonstrate compliance with requirements as of 2.911(d)5(i),(ii) – “Proof of Compliance with Covered List Software Requirements” of this document applies 1 The justification field is used to justify why the software cannot be received through that interface. Check the annex for more indications. 5 Signature: Name: Guangzheng Ji Date: 2026/08/13

Shenzhen Haidege Technology Co., Ltd Product Similarity Declaration Product name: Automatic Pet Feeder Model: APF03, APF04, APF05 FCC ID: 2BWGR-APF030405 We (Shenzhen Haidege Technology Co., Ltd) hereby state that all the models are electrically identical, including the same software parameters and hardware designs (such as circuit design, PCB layout, RF module/circuit, antenna type and antenna position, components on the PCB, etc.), the same mechanical structure and design (including product casing, materials, etc). The difference is merely the difference are the model name, appearance and accessories. Model appearance APF03 APF04 APF05 Signature: Name: Guangzheng Ji Title: Manager Place, date In China, 2026.08.14

C 5266091_X10_Ed.2 1/1 < Shenzhen Haidege Technology Co., Ltd > Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Date: 2026.08.13 Subject: Request for Confidentiality FCC ID: 2BWGR-APF030405 To Whom It May Concern, Pursuant t o t he provisions of Sections 0.457 and 0.459 of Commission's r ules (47CFR0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure. Exhibits Long-Term Confidentiality Short-Term Confidentiality NOTE 2 ID Label/Location No No Attestation Statement No No External Photos No ☐ Block Diagram ☒ ☐ Schematics ☒ ☐ Test Report No No Test Setup Photos No ☐ User’s Manual ☐ NOTE 1 ☐ Internal Photos ☐ NOTE 1 ☐ Parts List / Tune Up ☐ ☐ RF Exposure Info No No Operational Description ☒ ☐ Cover Letter(s) No No SDR Software / Security Info ☒ No NOTE 1: Long-Term Confidentiality may be permitted under special conditions (See II. LONG-TERM CONFIDENTIALITY, Section 3 of KDB 726920, use last in force) NOTE 2: Short-Term Confidentiality can be requested for a maximum of 180 days from the date of the grant. Above mentioned document contains detailed system and equipment description are considered as proprietary i nformation i n operation of t he equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In case of short-term Confidentiality, the applicant requests the exhibits selected above are withheld from public view for a period of ______ days from the date of the Grant of Equipment Authorization and prior to marketing. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. C5266091_X10_Ed.2 1/1 Sincerely, Signature: Name: Guangzheng Ji Title: Manager

C5266091_X8_Ed.1 1/1 Letter of Authorization Company: Shenzhen Haidege Technology Co., Ltd Address: 13A13, No. 51, Pingxin North Rd., Shangmugu Comm., Pinghu St., Longgang Dist.,Shenzhen,CHINA Product Name: Automatic Pet Feeder Model Number: APF03, APF04, APF05 FCC Identifier: 2BWGR-APF030405 We authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, to act on our behalf on all matters concerning the above named equipment. Any individual within LGAI Technological Center S.A. is authorized to act on our behalf and take action on the application. We declare that authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by LGAI Technological Center S.A. on our behalf shall have the same effect as acts of our own. Name: Guangzheng Ji Date: 2026.08.13 Title: Manager Signature of applicant:

Page 1 of 11 FCC ID: 2BWGR-APF030405 External Photo Model: APF03 Page 2 of 11 Page 3 of 11 Page 4 of 11 Model: APF04 Page 5 of 11 Page 6 of 11 Page 7 of 11 Page 8 of 11 Model: APF05 Page 9 of 11 Page 10 of 11 Page 11 of 11

FCC ID: 2BWGR-APF030405 Internal Photo Model: APF03 Model: APF04 Model: APF05 PCB view for APF03, APF04, APF05 Antenna

Page 1 of 2 FCC ID: 2BWGR-APF030405 RF Exposure Evaluation According to KDB 447498 D01 General RF Exposure Guidance v06 and part 2.1091，Unless specifically required by the published RF exposure KDB procedures, standalone 1-g head or body and 10-g extremity SAR evaluation for general population exposure conditions, by measurement or numerical simulation, is not required when the corresponding SAR Test Exclusion Threshold condition(s), listed below, is (are) satisfied. Limits The criteria listed in the following table shall be used to evaluate the environment impact of human exposure to radio frequency (RF) radiation as specified in 1.1307(b) Limits for Maximum Permissible Exposure (MPE) Frequency range (MHz) Electric field strength (V/m) Magnetic field strength (A/m) Power density (mW/cm 2 ) Averaging time (minutes) (A) Limits for Occupational/Controlled Exposures 0.3–3.0 614 1.63 *(100) 6 3.0–30 1842/f 4.89/f *(900/f 2 ) 6 30–300 61.4 0.163 1.0 6 300–1500 f/300 6 1500–100,000 5 6 (B) Limits for General Population/Uncontrolled Exposure 0.3–1.34 614 1.63 *(100) 30 1.34–30 824/f 2.19/f *(180/f 2 ) 30 30–300 27.5 0.073 0.2 30 300–1500 f/1500 30 1500–100,000 1.0 30 f = frequency in MHz Friis transmission formula: Pd = (Pout*G)/(4*pi*r 2 ) Where Pd = power density in mW/cm 2 , Pout = output power to antenna in mW; G = gain of antenna in linear scale, Pi = 3.1416; R = distance between observation point and center of the radiator in cm Pd id the limit of MPE, 1 mW/cm 2 . If we know the maximum gain of the antenna and the total power input to the antenna, through the calculation, we will know the distance r where the MPE limit is reached. Test Procedure Software provided by client enabled the EUT to transmit and receive data at lowest, middle and highest channel individually. Page 2 of 2 Test Result of RF Exposure Evaluation WIFI 2.4G gain 1.95 dBi WIFI 5G gain (U-NII-1) 1.97 dBi WIFI 5G gain (U-NII-3) -0.76 dBi Wifi 2.4G: modulation Channel Freq. (MHz) Measured power (dBm) Tune-up power (dBm) Max tune-up power (dBm) Antenna Gain Numeric Evaluation result (mW/cm2 ) Power density Limits (mW/cm 2 ) 802.11b 2412 17.02 ±1 18.02 1.57 0.019757 1 2437 17.99 ±1 18.99 1.57 0.024702 1 2462 17.91 ±1 18.91 1.57 0.024251 1 802.11g 2412 20.68 ±1 21.68 1.57 0.045891 1 2437 20.32 ±1 21.32 1.57 0.042241 1 2462 20.5 ±1 21.50 1.57 0.044028 1 802.11n20 2412 20.54 ±1 21.54 1.57 0.044435 1 2437 20.33 ±1 21.33 1.57 0.042338 1 2462 20.32 ±1 21.32 1.57 0.042241 1 802.11n40 2422 20.5 ±1 21.50 1.57 0.044028 1 2437 20.45 ±1 21.45 1.57 0.043524 1 2452 20.54 ±1 21.54 1.57 0.044435 1 WIFI 5G: Frequency range Channel Freq. (MHz) Measured power (dBm) Tune-up power (dBm) Max tune-up power (dBm) Antenna Gain Numeric Evaluation result (mW/cm2 ) Power density Limits (mW/cm 2 ) UNII-1 802.11a 9.57 ±1 10.57 1.57 0.003571 1 802.11n 9.71 ±1 10.71 1.57 0.003687 1 UNII-3 802.11a 10.11 ±1 11.11 0.84 0.002156 1 802.11n 9.27 ±1 10.27 0.84 0.001777 1 The worst-case situation is 0.045891 which is less than “1”, This confirmed that the device comply with FCC 1.1310 MPE limit.

ShenzhenBKCTestingCo.,Ltd.ReportNo.:BKC26063550FE-1 TestReportTel:4000-875-3820755-84829082Web:Http://www.bkc-lab.comPage1of59 TESTREPORT Applicant:ShenzhenHaidegeTechnologyCo.,Ltd Address: 13A13,No.51,PingxinNorthRd.,ShangmuguComm.,PinghuSt., LonggangDist.,Shenzhen,CHINA Manufacturer:ShenzhenHaidegeTechnologyCo.,Ltd Address: 13A13,No.51,PingxinNorthRd.,ShangmuguComm.,PinghuSt., LonggangDist.,Shenzhen,CHINA Factory:ShenzhenHaidegeTechnologyCo.,Ltd Address: 13A13,No.51,PingxinNorthRd.,ShangmuguComm.,PinghuSt., LonggangDist.,Shenzhen,CHINA ProductName: AutomaticPetFeeder ModelNumber: APF03,APF04,APF05 Trademark: / FCCID:2BWGR-APF030405 TestDate: May.08,2026–Aug.18,2026 DateofReport: Aug.18,2026 TestResult: ThisdevicedescribedabovehasbeentestedbyBKC,andthetest resultsshowthattheequipmentundertest(EUT)isincompliance withtheStandardrequirements.Anditisapplicableonlytothetested sampleidentifiedinthereport. TestProcedureUsed: Standards:FCCCFRTitle47Part15SubpartCSection15.247 ANSIC63.10-2020+Cor.1-2023+C63.10a-2024+Erratato C63.10a-2024 Preparedby(TestEngineer): CareyZheng Reviewer(Supervisor): CaseyWang Approved(Manager): JerryLiao ShenzhenBKCTestingCo.,Ltd.ReportNo.:BKC26063550FE-1 TestReportTel:4000-875-3820755-84829082Web:Http://www.bkc-lab.comPage2of59 TABLEOFCONTENT 1.GeneralInformation......................................................................................4 1.1.DescriptionofDevice(EUT).......................................................................................................................4 1.2.ChannelList..................................................................................................................................................4 1.3.Summaryoftestresult................................................................................................................................4 1.4.SpecialAccessoriesandAuxiliaryEquipment........................................................................................5 1.5.Testmode......................................................................................................................................................5 1.6.BlockDiagram...............................................................................................................................................5 1.7.TestConditions.............................................................................................................................................6 1.8.MeasurementUncertainty(95%confidencelevels,k=2)......................................................................6 1.9.TestFacility....................................................................................................................................................6 1.10.TestEquipment...........................................................................................................................................7 2.Conductedemissionatthemainsterminalstest......................................9 2.1.Limit................................................................................................................................................................9 2.2.TestSetup......................................................................................................................................................9 2.3.TestProcedure..............................................................................................................................................9 2.4.TestResult...................................................................................................................................................10 3.RadiatedSpuriousEmissions...................................................................12 3.1.Limit..............................................................................................................................................................12 3.2.TestSetup....................................................................................................................................................13 3.3.TestProcedure............................................................................................................................................15 3.4.TestResult...................................................................................................................................................16 4.ConductedSpuriousEmissions................................................................21 4.1.Limit..............................................................................................................................................................21 4.2.TestSetup....................................................................................................................................................21 4.3.TestProcedure............................................................................................................................................21 4.4.TestResult...................................................................................................................................................21 5.BandEdgeMeasurement...........................................................................34 5.1.Limit..............................................................................................................................................................34 5.2.Testsetup....................................................................................................................................................34 5.3.TestProcedure............................................................................................................................................34 5.4.TestResult...................................................................................................................................................34 6.-6dBBandwidthand99%BandwidthMeasurement.........................…

Text truncated - open the document above for the full version.

Shenzhen South Star Technology Co. Ltd. Shanghai South Star Technology Co. Ltd. SPECIFICATION FOR APPROVAL CUSTOMER : PART NAME : PART NO. : NDX NO. : REV. : Shenzhen southstar technology.co.,LTD 深圳市南斗星科技有限公司 Address：No.1606,Build C6,HengFeng industrial city,xixiang street,baoan district,Shenzhen Shenzhen southstar technology co., LTD. Shanghai branch 深圳市南斗星科技有限公司上海分公司 103B, Build10, No.198 Zhang Heng Road , Pudong New Area,Shanghai TUYA WBR3D PCB Antenna 2.4G/5.8G Antenna Assembly Specification(With housing) 1.Electrical Properties 1.1 Frequecy band.............................................2.4G/5GHz 1.2 Impedance.......................................................50Ω Norminal 2.Physical Propertie 1.3 VSWR ................................................................ ...<2 1.4 Radiation................................................................Omni 1.5 Gain(Peak).............................................................2.6dBi 1.6 Polarization............................................................Linear 1.7Admitted Power.....................................................1W 1.8 Connector...............................................................MHF s 2.1 Working Temperature.........................................-20°C~+65°C 2.2 Storage Temperature...........................................-30°C~+75°C Shenzhen South Star Technology Co. Ltd. 103B, Build10, No.198 Zhang Heng Road , Pudong New Area,Shanghai Antenna Design Document NumberNDX-1908020 Released Date20/08/2019 AuthorMingchao Zhang Review ByZhongyi Zhao Shenzhen South Star Technology Co. Ltd. 103B, Build10, No.198 Zhang Heng Road , Pudong New Area,Shanghai Revised History DateVersionRevised Recored 20/08/20191.00 1st Released Shenzhen South Star Technology Co. Ltd. 103B, Build10, No.198 Zhang Heng Road , Pudong New Area,Shanghai 1.Antennas' setup and enviroment With housing PCB Antenna Shenzhen South Star Technology Co. Ltd. 103B, Build10, No.198 Zhang Heng Road , Pudong New Area,Shanghai 2.Analyzer Measurement 2.1 Ant 2.4G -5.8G S11 VSWR Shenzhen South Star Technology Co. Ltd. 103B, Build10, No.198 Zhang Heng Road , Pudong New Area,Shanghai 3.Gain & Patterns test results 3.1 Measurement setting-XYZ Shenzhen South Star Technology Co. Ltd. 103B, Build10, No.198 Zhang Heng Road , Pudong New Area,Shanghai 3.2 Ant 2.4G 3D Patterns Shenzhen South Star Technology Co. Ltd. 103B, Build10, No.198 Zhang Heng Road , Pudong New Area,Shanghai 3.2 Ant 5G 3D Patterns Shenzhen South Star Technology Co. Ltd. 103B, Build10, No.198 Zhang Heng Road , Pudong New Area,Shanghai 3.2 Ant 2.4G 2D Patterns Shenzhen South Star Technology Co. Ltd. 103B, Build10, No.198 Zhang Heng Road , Pudong New Area,Shanghai 3.2 Ant 5G 2D Patterns Shenzhen South Star Technology Co. Ltd. 103B, Build10, No.198 Zhang Heng Road , Pudong New Area,Shanghai 4. Peak Gain & Efficiency FreqEffiEffiGain (MHz)(%)(dB)(dBi) 240021.72-6.630.47 241024.64-6.081.17 242027.86-5.551.95 243026.18-5.821.71 244024.58-6.091.5 245023.27-6.331.17 246024.25-6.151.22 247021.7-6.630.55 248019.44-7.11-0.22 249016.86-7.73-1.02 510032.86-4.831.22 520039.24-4.061.97 530032.14-4.931.08 540054.54-2.632.64 550033.93-4.691.6 560034.27-4.650.65 570030.77-5.12-0.76 580035.7-4.47-0.84

FCC ID: 2BWGR-APF030405 Test Photo