2BWIX-ZX-RF12JRemote control

User Manual 1、 The left button controls the light's on and off, while the right button cycles through color temperature shortcuts: 3000K–5000K–6500K. 2、 These two buttons represent color temperature, indicating a decrease and an increase in color temperature respectively. 3、，These two buttons represent the power of the lamp, allowing you to adjust the increase and decrease of the power respectively. 4、 Press this button, regardless of whether the lamp is on or off, when you press the button, the lamp will return to its maximum power and the highest color temperature. 5、 These three buttons: 1H indicates that the light will automatically turn off after 1 hour of the set time; 4H means it will turn off after 4 hours of the set time; 8H means it will turn off after 8 hours of the set time. 6、 These two indicate the cancellation of functions. 7、Pairing: Press and hold for a long time before powering on. ；Disassembly: Press and hold for a long time before powering on. FCC statement This device complies with Part 15 of the FCC rules. Operation is subject to thefollowing two conditions: 1) This device may not cause interference. 2) This device must accept any interference, including interference that may causeundesired operation of the device. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in particular installation, lf this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: --Reorient or relocate the receiving antenna. --Increase the separation between the equipment and receiver. --Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. --Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. FCC Radiation Exposure Statement This device complies with FCC RF radiation exposure limits set forth for an uncontrolled environment.

Guangdong Moore Technology Co Ltd Covered Equipment Certification Attestation Letter 6/17/2026 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA ATTN.: Reviewing Engineer FCC ID: 2BWIX-ZX-RF12J Guangdong Moore Technology Co Ltd (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Note: If the equipment for which the applicant seeks authorization is produced by any of the entities identified on the current Covered List, the applicant should include an explanation on why the equipment is not “covered” equipment. Guangdong Moore Technology Co Ltd (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Guangdong Moore Technology Co Ltd (“the applicant”) certifies that the equipment for which authorization is sought does not include cybersecurity or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors and assignees, including equipment with integrated Kaspersky Lab, Inc. (or any of its successors and assignees) cybersecurity or anti-virus software pursuant to DA-24-886 and KDB 986446 D01 Covered Equipment Guidance section B(2a). <Signature> Name: Jianshan Lin Title: Manager Applicant Company: Guangdong Moore Technology Co Ltd Date: 6/17/2026

Guangdong Moore Technology Co Ltd * the applicant must designate a contact located in the United States for purposes of acting as the applicant’s agent for service of process, regardless of whether the applicant is a domestic or foreign entity. An applicant located in the United States may designate itself as the agent for service of process. U.S. Agent Designation for Service of Process - Certification Attestation Letter 7/2/2026 TO: Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 ATTN.: Reviewing Engineer FCC ID: 2BWIX-ZX-RF12J FRN of applicant: 0038520904 Per section 2.911(d)(7) of the FCC rules, [Guangdong Moore Technology Co Ltd] (“the applicant”) certifies that the equipment for which authorization is sought is designated to the following U.S. agent* for service of process: Company Name: CELLT INC. FCC Registration Number (FRN): 0036412567 Physical U.S. Company Address: 1401 21ST ST # 12958 SACRAMENTO, CA 95811, USA Contact Person: Thompson Lim Agent Email Address: [email protected] The above contact person accepts the obligation for service of process. The applicant accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Applicant Signed: Signed: Printed name: Jianshan Lin Title: Manager Company Name: Guangdong Moore Technology Co Ltd Date: 7/2/2026 Agent Signed (if different from Applicant): Signed: Printed name: Thompson Lim Title: Manager Company Name: CELLT INC. Date: 7/2/2026

DATE: 2026.06.17 Federal Communications Commission Authorization & Evaluation Division 7345 Oakland Mills Road Columbia, Maryland 21046 Authority to Act as Age nt On our behalf, I appoint Dongguan New Testing Centre Co., Ltd; 1F & 3F, No. 1 the 1st North Industry Road Songshan Lake Science & Technology Park Dongguan, People’s Republic of China 523808 (Name of Agent company name and address) to act as our agent in the preparation of this application for equipment certification. I certify that submitted documents properly describe the device or system for which equipment certification is sought. I also certify that each unit manufactured, imported or marketed, as defined in the Federal Communications Commission’s regulations will have affixed to it a label identical to that submitted for approval with this application. For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for certification, still resides with Guangdong Moore Technology Co Ltd；Building 39-1, No. 1, Huizhi Road Daze Town, Xinhui District,Jiangmen,Guangdong (Applicant Name and address) <Signature> Name: Jianshan Lin Title: Manager Applicant Company: Guangdong Moore Technology Co Ltd

Date 2026.06.17 Federal Communications Commission Authorization & Evaluation Division 7345 Oakland Mills Road Columbia, Maryland 21046 RE: LETTER OF AGENT AUTHORIZATION To Whom It May Concern: We, the undersigned, hereby authorize Compliance Testing, LLC to act on our behalf in all matters relating to application for equipment authorization, including the signing of all documents relating to these matters. We also hereby certify that no party to the application authorized hereunder is subject to the denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C.853(a). Sincerely, <Signature> Name: Jianshan Lin Title: Manager Applicant Company: Guangdong Moore Technology Co Ltd

DATE 2026.06.17 Equipment Autorisation Division Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: 2BWIX-ZX-RF12J Product Name: Remote control Request for Confidentiality Pursuant to Sections 0.457 and 0.459 of the commission’s rules, we hereby request that the following documents be held confidential: (List here the documents for which you are seeking confidentiality – for example ...)  Schematics  Block diagram  Operation description These materials contain trade secrets and proprietary information and are not customarily released to the public. The public disclosure of this information might be harmful to the company and provide unjustified benefits to our competitors. <Signature> Name: Jianshan Lin Title: Manager Applicant Company: Guangdong Moore Technology Co Ltd

Label and Label Locaion Remote control Model: ZX-RF12J FCC ID: 2BWIX-ZX-RF12J

Internal Photos Antenna

RF Exposure evaluation According to 447498 D04 Interim General RF Exposure Guidance v01 2.1.2 1-mW Test Exemption Per §1.1307(b)(3)(i)(A), a single RF source is exempt RF device (from the requirement to show data demonstrating compliance to RF exposure limits, as previously mentioned) if the available maximum time- averaged power is no more than 1 mW, regardless of separation distance. eirp = pt x gt = (EXd) 2 /30 where: pt = transmitter output power in watts, gt = numeric gain of the transmitting antenna (unitless), E = electric field strength in V/m, --- 10 ((dBuV/m)/20) /10 6 d = measurement distance in meters (m)---3m So pt = (EXd) 2 /30 x gt Field strength = 75.08dBμV/m @3m Antenna gain=0dBi So EIRP=75.08-95.2+4.7=-15.42dBm 10^-15.42=0.0287 mW<1 mW Then SAR evaluation is not required

4 .15 cm 2 .50 cm 4 .15 cm 0 .50 cm 0 .50 cm 2 . 16 cm 2.72cm

Page 1 / 27 No.:NTC-ER2508023 FCC TEST REPORT Report No..................................... : NTC-ER2605015 Applicant’s name ......................... : Guangdong Moore Technology Co Ltd Addre ss ....................................... : Building 39-1, No. 1, Huizhi Road Daze Town, Xinhui District,Jiangmen,Guangdong DONGGUAN NEW TESTING CENTRE CO., LTD ◎Address: 1F & 3F, No. 1 the 1st North Industry Road Songshan Lake Science & Technology Park Dongguan, People’s Republic of China 523808 Tel: +86-769-22212079 Web: http://www.ntc-cert.com E-mail: [email protected] Page 1 / 27 No.: NTC-ER2605015 TABLE OF CONTENTS 1. SUMMARY ........................................................................................................................................ 4 1.1. Test Standards............................................................................................................................ 4 1.2. Test Description ......................................................................................................................... 4 2. Test Facility ....................................................................................................................................... 5 3. GENERAL INFORMATION ................................................................................................................... 6 3.1. Environmental conditions ........................................................................................................... 6 3.2. General Description of EUT ......................................................................................................... 6 3.3. Related Submittal(s) / Grant (s) ................................................................................................... 6 3.4. Modifications ............................................................................................................................. 6 3.5. Equipments Used During The Test ............................................................................................... 7 4. TEST CONDITIONS AND RESULTS........................................................................................................ 8 4.1. Conducted Emission (AC Main) .................................................................................................... 8 4.2. Radiated Emission ...................................................................................................................... 9 4.3. 20dB Bandwidth ....................................................................................................................... 19 4.4. Deactivation Time..................................................................................................................... 20 4.5. Antenna Requirement............................................................................................................... 21 5. Test Setup Photos of the EUT........................................................................................................... 22 6. External and Internal Photos of the EUT........................................................................................... 23 Dongguan New Testing Centre Co., Ltd E-mail： [email protected] 1F & 3F, No. 1 the 1st North Industry Road Songshan Lake Science & Technology Park Dongguan, People’s Republic of China 523808 Page 2 / 27 No.: NTC-ER2605015 TEST REPORT DECLARE Test Standard Used: FCC Rules and Regulations Part 15 Subpart C 15.231, ANSI C63.10:2020. We Declare: The equipment described above is tested by Dongguan New Testing Centre Co., Ltd and in the configuration tested the equipment complied with the standards specified above. The test results are contained in this test report and Dongguan New Testing Centre Co., Ltd is assumed of full responsibility for the accuracy and completeness of these tests. After test and evaluation, our opinion is that the equipment provided for test compliance with the requirement of the above FCC standards. Report No.: NTC-ER2605015 Date of Test: Jun.08,2026 to Jun.09,2026 Date of Report: Jun.09,2026 Prepared By: Approved By: ___________________ ______________________ Taylor Chen/Engineer Dave Gao/LAB Manager Note: This report applies to above tested sample only. This report shall not be reproduced in parts without written approval of Dongguan New Testing Centre Co., Ltd FCC ID : 2BWIX-ZX-RF12J Applicant : Guangdong Moore Technology Co Ltd Address : Building 39-1, No. 1, Huizhi Road Daze Town, Xinhui District,Jiangmen,Guangdong Equipment under Test : Remote control Model/Type reference : ZX-RF12J List Model(s) N/A Trade Mark : N/A Manufacturer : Guangdong Moore Technology Co Ltd Address : Building 39-1, No. 1, Huizhi Road Daze Town, Xinhui District,Jiangmen,Guangdong Test Laboratory : Dongguan New Testing Centre Co., Ltd CAB identifier : CN1264 Address : 1F & 3F, No. 1 the 1st North Industry Road Songshan Lake Science & Technology Park Dongguan, People’s Republic of China 523808 Dongguan New Testing Centre Co., Ltd E-mail： [email protected] 1F & 3F, No. 1 the 1st North Industry Road Songshan Lake Science & Technology Park Dongguan, People’s Republic of China 523808 Page 3 / 27 No.: NTC-ER2605015 ** Modified History ** Version Description Issued Data Report No. Remark Version 1.0 Initial Test Report Release 2026-06-09 NTC-ER2605015 Dave Gao Dongguan New Testing Centre Co., Ltd E-mail： [email protected] 1F & 3F, No. 1 the 1st North Industry Road Songshan Lake Science & Technology Park Dongguan, People’s Republic of China 523808 Page 4 / 27 No.: NTC-ER2605015 1. SUMMARY 1.1. Test Standards The tests were performed according to following standards: FCC Rules Part 15.231: Periodic operation in the band 40.66-40.70 MHz and above 70 MHz. ANSI C63.10:2020 : American National Standard for Testing Unlicensed Wireless Devices 1.2. Test Description FCC and IC Requirements FCC Part 15.207 Conducted Emission N/A FCC Part 15.231(a)(1) Automatically Deactivate PASS FCC Part 15…

Text truncated - open the document above for the full version.

Photos of radiated emission test 30MHz – 1GHz Photos of radiated emission test Above 1GHz