2BWK2-ZC101Emitter

PRODUCT ILLUSTRATION PRODUCT PARAMETERS APPLICATION MODE Note: The above parameter information is for reference only. The actual site shall prevail. If you have any technical questions, please consult Zhihu Qiju Co., Ltd. ZC51-D800-16-F2/D1 DC24V±10% 16 ModelInput voltage Number of channels DC24V/36W Motor output*2 DC24V/352W LED lamp output 20*5.5*5.5CM Product size ZC101 ZC101-16PZC101-16P 16 CR2450（3V） Model Number of channels Battery Type ≤10MW Transmit power -20°C~55°C Working temperature -20°C~75°C Working temperature 135*40*8MM Product size Transmit signal F1、F2： Represent overturned louver 01-CC： Represents windproof roller shutter Overturning the louver Lights Windproof roller blind Cut frequency (long press to cut CC)Lights Downward Stop Uplink 16 Cut frequency (long press to cut CC) Lights Downward Stop Uplink 16 24V Motor LED Light strip Wireless control windproof roller blind 24V Motor Remote ControlSolar Rain Sense FQ15-2PFemale end hole pattern (medium) Brown wire (motor) Blue Line (Motor-) FQ15-2PFemale end hole pattern (medium) Brown wire (motor) Blue Line (Motor-) FQ18-2PFemale end hole type (large） Brown line (light strip) Blue line (strip-) FQ18-2PMale end hole type (large) Blue wire (24V power supply-) Brown wire (24V power supply) ZC51-D800-16-F2/D1 S1S2 CR2450 Code key 2：AOK 1：DOOYA DC waterproof power supply Gazebo embedded control panel ZC101 Instructions for use OPERATION MODE (Rain sense only controls overturning louver) Rain sense and controller pair code Press the code key Delete code successfully Delete code Panel Any Channel Press and hold the Stop and Down keys for 8 seconds Panel LCD screen "LE" flash 3 Solution Channel Restore Channel 16 Press and hold the "light key" "cut frequency" for 5 seconds 16 CC Dial to 1 Remote control code Code success Code success (The remote controller needs to dial the code to select the manufacturer, and then switch the frequency to the CC code before the receiver can forward and control the roller shutter.) Windproof roller shutter pair code The motor is energized to enter the code Press remote control S1-S1-up S1S2 CR2450 Panel any channel press "stop key" 5 seconds Panel any channel press "stop key" 5 seconds Cut the frequency to CC, and then press the up key. Note: 1. Only CC channel has the forwarding function. 2. Other multi-frequency transmitter, please cut to F1 pair code. DOOYA Motor Remote control dial code selection manufacturers Panel LCD screen "LE" slow flash Remote control starts from channel 1 Refer to motor instructions Refer to motor instructions Panel LCD screen "LE" flash 3 Panel LCD screen "LE" slow flash Panel LCD screen "LE" flash 3 Panel LCD screen "LE" flash 3 Dial to 2 Motor key to enter the code Press the remote control to go up S1S2 CR2450 AOK Motor Remote control dial code selection manufacturers Remote control starts from channel 1 Commutation success Shutter motor commutation Panel Any Channel Press and hold the Up and Down keys for 5 seconds 03 Lock Channel Select Channel Press and hold the "light key" "cut frequency" for 5 seconds 03 Note: 1. If the remote control LCD screen, switch to CF group control, press and hold the "light key" and "cut frequency" for 5 seconds, and lock frequency 01-CC channel. 2. If the LCD screen of the remote controller is cut to F1 state, press and hold the "light key" and "cut frequency" for 5 seconds to lock the frequency F2-CF channel. Note: 1. If the remote control LCD screen, switch to CF group control, press and hold the "light key" and "cut frequency" for 5 seconds, and the frequency is 01-CC channel. 2. If the LCD screen of the remote controller is cut to F1 state, press and hold the "light key" and "cut frequency" for 5 seconds to decast the F2-CF channel.

LocalRepresentativeLetter ForCertificationServiceintheUSA FederalCommunicationsCommission EquipmentAuthorizationDivision,ApplicationProcessingBranch 7435OaklandMillsRoad Columbia,MD21048 Towhomitmayconcern PursuanttoSection2.911(d)(7),oftheCommission’sRules(47C.F.R.)weattestasfollowsfor theproductlistedbelow: FCCIDModelname 2BWK2-ZC101ZC101 Weherebyacknowledgeasfollows: i.bothsigneesconfirmthatthepointofcontactacceptsresponsibilitytoactasaUS- AmericanRepresentativeonbehalfoftheapplicant ii.thepointofcontactprovidesthephysicalU.S.addressandemailaslistedbelow iii.bothpartiesmaintaintherequirementsofthisagreementwithoutexpirationdate US-AmericanPointofContactApplicant/ApprovalHolder SignatureSignature CompanyName:FCCUSAgent,LLCShenzhenTigerControlSystem Co.,Ltd. FRN:00334028840038530424 ContactName:TimPayneQIANGLUO Address:3722IllinoisAvenue,SaintCharles, IL,60174,USA 3/F,Bldg6,JingdingTechPk,2 JindongAve,BaolongSt, Longgang,Shenzhen,China Phone:708-571-314813480991845 Email:[email protected]

Covered Equipment Attestation Letter For Certification Service in the USA Federal Communications Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 To whom it may concern Pursuant to Section 2.911(d)(5)(i)-(ii) of the Commission’s Rules (47 C.F.R.) we attest as follows for the product listed below: FCC ID Model name 2BWK2-ZC101 ZC101, ZC101-01, ZC101-02, ZC101-16, ZC101-01P, ZC101-01P-FSK, ZC101-16P(F1), ZC101-16P-FSK, ZC101-16PM(F1), ZC101- 16PM(F2), ZC101-16PM-FSK, ZC101-16P- ALL, ZC101-16PM-ALL, ZC101-01T, ZC101- 16T, ZC101-01D, ZC101-02D, ZC101-16D We, Applicant Company Name: Shenzhen Tiger Control System Co., Ltd. Address: 3/F, Bldg6, Jingding Tech Pk, 2 Jindong Ave, Baolong St, Longgang, Shenzhen, China Phone: +86-13418545574 certify that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. This includes the cybersecurity and anti-virus software produced or provided by Kaspersky Lab, Inc. or any of ist successors and assignees. We certify that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. If you have any questions, please feel free to contact us at the address shown below. Sincerely, 2026-06-15 Signature Date Name / Title: QIANG LUO / Manager Company: Shenzhen Tiger Control System Co., Ltd. Address: 3/F, Bldg6, Jingding Tech Pk, 2 Jindong Ave, Baolong St, Longgang, Shenzhen, China Phone: +86-13418545574 Fax: N/A E-Mail: [email protected]

Due Diligence Letter For Certification Service in the USA Federal Communications Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 To whom it may concern FCC ID Model name 2BWK2-ZC101 ZC101, ZC101-01, ZC101-02, ZC101-16, ZC101-01P, ZC101-01P-FSK, ZC101-16P(F1), ZC101-16P-FSK, ZC101-16PM(F1), ZC101- 16PM(F2), ZC101-16PM-FSK, ZC101-16P- ALL, ZC101-16PM-ALL, ZC101-01T, ZC101- 16T, ZC101-01D, ZC101-02D, ZC101-16D Pursuant to KDB 986446 D01 Covered Equipment Guidance the evaluation of the product above shows compliance for the following reasons: Compliance Evaluation process Results Inherent compliance The chipset(s) used is not capable of running the cybersecurity and/or anti-virus software Compliance The memory used does not allow the running the cybersecurity and/or anti-virus software Compliance The storage capacity does not allow the running the cybersecurity and/or anti-virus software Compliance The operating system used is not capable of running the cybersecurity and/or anti-virus software Compliance No inherent compliance Based on software bill of material Based on scan for running software on the device Based on filesystem scan for cybersecurity and/or anti-virus software The equipment for which authorization is sought complies with the rules and fulfils the requirements as detailed in the above mentioned KDB. Evaluation performed by Company Name: Shenzhen Global Test Service Co., Ltd. Contact Name: Peter Xiao Address: Room No. 101, Building 1, and Room No. 101, Building 3, No. 88 Jinkang Road, Jinsha Community, Kengzi Sub-district, Pingshan District, Shenzhen City, Guangdong, China Phone: +86-75528717088 Email: [email protected] Date: 2026-06-16 Signature:

2BWK2-ZC101Confidentiality Request Letter For Certification Service in the USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 To whom it may concern Pursuant to Paragraphs §0.457 and 0.459 of the Commission’s Rules (47 C.F.R.) and Section §552(b)(4) of the Freedom of Information Act, we request confidentiality for the documentation of the following products: FCC ID Model name 2BWK2-ZC101 ZC101, ZC101-01, ZC101-02, ZC101-16, ZC101-01P, ZC101-01P-FSK, ZC101-16P(F1), ZC101-16P-FSK, ZC101- 16PM(F1), ZC101-16PM(F2), ZC101-16PM-FSK, ZC101- 16P-ALL, ZC101-16PM-ALL, ZC101-01T, ZC101-16T, ZC101-01D, ZC101-02D, ZC101-16D For the products listed above, we request permanent confidentiality for all applicable exhibits as there are: • the Operational Description • the Block Diagram • the Schematics • the Part List • the Tune up Procedure The above listed exhibits contain trade secrets and proprietary information that could be of benefit to our competitors. If you have any questions, please feel free to contact us at the address shown below. Sincerely, 2026-06-15 Signature Date Name / Title: QIANG LUO / Manager Company: Shenzhen Tiger Control System Co., Ltd. Address: 3/F, Bldg6, Jingding Tech Pk, 2 Jindong Ave, Baolong St, Longgang, Shenzhen, China Phone: +86-13418545574 Fax: N/A E-Mail: [email protected]

Shenzhen Tiger Control System Co., Ltd. 3/F, Bldg6, Jingding Tech Pk, 2 Jindong Ave, Baolong St, Longgang, Shenzhen, China Date: June 15, 2026 FCC ID: 2BWK2-ZC101 Model Number: ZC101, ZC101-01, ZC101-02, ZC101-16, ZC101-01P, ZC101-01P-FSK, ZC101-16P(F1), ZC101-16P-FSK, ZC101-16PM(F1), ZC101-16PM(F2), ZC101-16PM-FSK, ZC101-16P-ALL, ZC101-16PM-ALL, ZC101-01T, ZC101-16T, ZC101-01D, ZC101-02D, ZC101-16D To: Federal Communication Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21048 To Whom It May Concern, We, Shenzhen Tiger Control System Co., Ltd. hereby declare that our product (Emitter) Model Number: ZC101, ZC101-01, ZC101-02, ZC101-16, ZC101-01P, ZC101-01P-FSK, ZC101-16P(F1), ZC101-16P-FSK, ZC101-16PM(F1), ZC101-16PM(F2), ZC101-16PM-FSK, ZC101-16P-ALL, ZC101-16PM-ALL, ZC101-01T, ZC101-16T, ZC101-01D, ZC101-02D, ZC101-16D board, Schematic, Hardware version, Software version, structure and internal photos are same, named differently due to marketing purposes. Should you have any questions or comments regarding this matter, please have my best attention. Sincerely, (Signed) Name / Title: QIANG LUO / Manager Company: Shenzhen Tiger Control System Co., Ltd. Address: 3/F, Bldg6, Jingding Tech Pk, 2 Jindong Ave, Baolong St, Longgang, Shenzhen, China Phone: +86-13418545574 Fax: N/A E-Mail: [email protected]

FCCID:2BWK2-ZC101 Fig.1 Fig.2 FCCID:2BWK2-ZC101 Fig.3 Fig.4 FCCID:2BWK2-ZC101 Fig.5 Fig.6

_____________________________________________________________________________________________________ LABELANDLOCATION (Size:L2.0cmx2.0cm) productname：Emitter Model:ZC101 TradeMark： Input:DC3.0V FCCID:2BWK2-ZC101 LabelLocation

FCCID:2BWK2-ZC101 Fig.1 Fig.2 FCCID:2BWK2-ZC101 Fig.3 Fig.4 SRDAntenna FCCID:2BWK2-ZC101 Fig.5 Fig.6 FCCID:2BWK2-ZC101 Fig.7 Fig.8

ShenzhenGlobalTestServiceCo.,Ltd. RoomNo.101,Building1,andRoomNo.101,Building3,No.88JinkangRoad,JinshaCommunity, KengziSub-district,PingshanDistrict,ShenzhenCity,Guangdong,China RFExposureevaluation ReportReferenceNo........................: FCCID..................................................: GTS20260422010-1-06 2BWK2-ZC101 Compiledby (position+printedname+signature)..:FileadministratorsJinghuaXiao Supervisedby (position+printedname+signature)..:TestEngineerEvanOuyang Approvedby (position+printedname+signature) .. : ManagerJasonHu Dateofissue.........................................:Jun.01,2026 RepresentativeLaboratoryName . :ShenzhenGlobalTestServiceCo.,Ltd. Address ................................................. : RoomNo.101,Building1,andRoomNo.101,Building3,No.88 JinkangRoad,JinshaCommunity,KengziSub-district,Pingshan District,ShenzhenCity,Guangdong,China,China Applicant’sname ............................... :ShenzhenTigerControlSystemCo.,Ltd. Address.................................................:3/F,Bldg6,JingdingTechPk,2JindongAve,BaolongSt,Longgang, Shenzhen,China Testspecification..............................: Standard ................................................ : 47CFR§1.1310 47CFR§2.1093 KDB447498D01GeneralRFExposureGuidancev06 TRFOriginator......................................:ShenzhenGlobalTestServiceCo.,Ltd. MasterTRF...........................................:Dated2014-12 ShenzhenGlobalTestServiceCo.,Ltd.Allrightsreserved. Thispublicationmaybereproducedinwholeorinpartfornon-commercialpurposesaslongasthe ShenzhenGlobalTestServiceCo.,Ltd.isacknowledgedascopyrightownerandsourceofthematerial. ShenzhenGlobalTestServiceCo.,Ltd.takesnoresponsibilityforandwillnotassumeliabilityfordamages resultingfromthereader'sinterpretationofthereproducedmaterialduetoitsplacementandcontext. Testitemdescription........................:Emitter TradeMark ............................................ : Manufacturer.........................................:ShenzhenTigerControlSystemCo.,Ltd. Model/Typereference ......................... :ZC101 ListedModels......................................:Seethepage2 Exposurecategory...............................:Generalpopulation/uncontrolledenvironment EUTType .............................................. :Portable HardwareVersion ............................... :N/A SoftwareVersion..................................: N/A Rating.....................................................:DC3.0VFrombattery Result ..................................................... :PASS ReportNo.:GTS20260422010-1-06Page 2 of 7 TESTREPORT TestReportNo.: GTS20260422010-1-06 Jun.01,2026 ______________________________________________________________________________________________ Dateofissue EquipmentunderTest:Emitter Model/Type:ZC101 Listedmodel: ZC101-01,ZC101-02,ZC101-16,ZC101-01P,ZC101-01P-FSK, ZC101-16P(F1),ZC101-16P-FSK,ZC101-16PM(F1), ZC101-16PM(F2),ZC101-16PM-FSK,ZC101-16P-ALL, ZC101-16PM-ALL,ZC101-01T,ZC101-16T,ZC101-01D, ZC101-02D,ZC101-16D Applicant :ShenzhenTigerControlSystemCo.,Ltd. Address : 3/F,Bldg6,JingdingTechPk,2JindongAve,BaolongSt, Longgang,Shenzhen,China Manufacturer :ShenzhenTigerControlSystemCo.,Ltd. Address : 3/F,Bldg6,JingdingTechPk,2JindongAve,BaolongSt, Longgang,Shenzhen,China TestResult:PASS Thetestreportmerelycorrespondstothetestsample. Itisnotpermittedtocopyextractsofthesetestresultwithoutthewrittenpermissionofthetest laboratory. ReportNo.:GTS20260422010-1-06Page 3 of 7 Contents 1.SUMMARY...............................................................................................................................................4 1.1.ProductDescription....................................................................................................................................4 2.TESTENVIRONMENT.......................................................................................................................5 2.1.Addressofthetestlaboratory...................................................................................................................5 2.2.TestFacility..................................................................................................................................................5 2.3.Environmentalconditions...........................................................................................................................5 2.4.Statementofthemeasurementuncertainty.............................................................................................5 3.METHODOFMEASUREMENT.....................................................................................................6 3.1.ApplicableStandard....................................................................................................................................6 3.2.EvaluationMethodandLimit......................................................................................................................6 4.CONDUCTEDPOWERRESULTS...............................................................................................7 5.MANUFACTURINGTOLERANCE...............................................................................................7 6.EVALUATIONRESULTS.................................................................................................................7 6.1.StandaloneEvaluation................................................................................................................................7 7.CONCLUSION........................................................................................................................................7 ReportNo.:GTS20260422010-1-06Page 4 of 7 1.SUMMARY 1.1.ProductDescription ProductName:Emitter TradeMark: Model/Typereference:ZC101 ListModel: ZC101-01,ZC101-02,ZC101-16,ZC101-01P,ZC101-01P-FSK,ZC101- 16P(F1),ZC101-16P-FSK,ZC101-16PM(F1),ZC101-16PM(F2),ZC101- 16PM-FSK,ZC101-16P-ALL,ZC101-16PM-ALL,ZC101-01T,ZC101-16T, ZC101-01D,ZC101-02D,ZC101-16D ModelDecla…

Text truncated - open the document above for the full version.

ManufacturerShenzhenTigerControlSystemCo.,Ltd. Address3/F,Bldg6,JingdingTechPk,2Jindong Ave,BaolongSt,Longgang,Shenzhen, China Model ZC101 Antennatype InternalAntenna 1.Testequipmentandconditions: 1.1.NetworkAnalyzer 1.2.Communicationtestequipment 1.3.Testsystem 1.4.Matchingcircuit 2.Antennadrawing（mm）: We statement that All measurements were performed radiated and therefore additional antenna gain documentation is not required.

Shenzhen Global Test Service Co.,Ltd. Room No. 101, Building 1, and Room No. 101, Building 3, No. 88 Jinkang Road, Jinsha Community, Kengzi Sub-district, Pingshan District, Shenzhen City, Guangdong, China FCC PART 15 SUBPART C TEST REPORT FCC PART 15.231 Report Reference No. ..................... : FCC ID............................................. : GTS20260422010-1-05 2BWK2-ZC101 Compiled by ( position+printed name+signature) . : File administrators Jinghua Xiao Supervised by ( position+printed name+signature) . : Test Engineer Evan Ouyang Approved by ( position+printed name+signature) . : Manager Jason Hu Date of issue .................................... : Jun.01, 2026 Representative Laboratory Name . : Shenzhen Global Test Service Co.,Ltd. Address ............................................ : Room No. 101, Building 1, and Room No. 101, Building 3, No. 88 Jinkang Road, Jinsha Community, Kengzi Sub-district, Pingshan District, Shenzhen City, Guangdong, China Applicant’s name ............................ : Shenzhen Tiger Control System Co., Ltd. Address ............................................ : 3/F, Bldg6, Jingding Tech Pk, 2 Jindong Ave, Baolong St, Longgang, Shenzhen, China Test specification ........................... : Standard ........................................... : FCC Part 15.231 TRF Originator .................................. : Shenzhen Global Test Service Co.,Ltd. Master TRF ...................................... : Dated 2014-12 Shenzhen Global Test Service Co.,Ltd. All rights reserved. This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen Global Test Service Co.,Ltd. is acknowledged as copyright owner and source of the material. Shenzhen Global Test Service Co.,Ltd. takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. Test item description ..................... : Emitter Trade Mark ....................................... : Manufacturer .................................... : Shenzhen Tiger Control System Co., Ltd. Model/Type reference ...................... : ZC101 Listed Models .................................. : See the page 2 Modulation Type ............................... : OOK, FSK Operation Frequency ........................ : From 433.9375MHz Hardware Version ............................ : N/A Software Version .............................. : N/A Rating ............................................... : DC 3.0V by battery Result ............................................... : PASS Report No.: GTS20260422010-1-05 Page 2 of 35 T E S T R E P O R T Test Report No. : GTS20260422010-1-05 Jun.01, 2026 ______________________________________________________________________________________________ Date of issue Equipment under Test : Emitter Model /Type : ZC101 Listed model : ZC101-01, ZC101-02, ZC101-16, ZC101-01P, ZC101-01P-FSK, ZC101-16P(F1), ZC101-16P-FSK, ZC101-16PM(F1), ZC101-16PM(F2), ZC101-16PM-FSK, ZC101-16P-ALL, ZC101-16PM-ALL, ZC101-01T, ZC101-16T, ZC101-01D, ZC101-02D, ZC101-16D Applicant : Shenzhen Tiger Control System Co., Ltd. Address : 3/F, Bldg6, Jingding Tech Pk, 2 Jindong Ave, Baolong St, Longgang, Shenzhen, China Manufacturer : Shenzhen Tiger Control System Co., Ltd. Address : 3/F, Bldg6, Jingding Tech Pk, 2 Jindong Ave, Baolong St, Longgang, Shenzhen, China Test Result: PASS The test report merely corresponds to the test sample. It is not permitted to copy extracts of these test result without the written permission of the test laboratory. Report No.: GTS20260422010-1-05 Page 3 of 35 Contents 1. TEST STANDARDS ......................................................................................................................................... 4 2. SUMMARY ....................................................................................................................................................... 5 2.1. General Remarks ................................................................................................................................... 5 2.2. Product Description ................................................................................................................................ 5 2.3. Equipment Under Test ........................................................................................................................... 6 2.4. Short description of the Equipment under Test (EUT) ........................................................................... 6 2.5. EUT operation mode .............................................................................................................................. 6 2.6. Block Diagram of Test Setup ................................................................................................................. 6 2.7. EUT Exercise Software .......................................................................................................................... 7 2.8. Special Accessories ............................................................................................................................... 7 2.9. External I/O Cable .................................................................................................................................. 7 2.10. Related Submittal(s) / Grant (s) ........................................................................................................... 7 2.11. Modifications ........................................................................................................................................ 7 3. TEST ENVIRONMENT ..................................................................................................................................... 8 3.1. Address of the test laboratory ................................................................................................................ 8 3.2. Test Facility ..…

Text truncated - open the document above for the full version.

FCCID:2BWK2-ZC101 _______________________________________________________________________________________________ Page1of2 1.TESTSETUPPHOTOGRAPHS PhotoofRadiatedEmissionsMeasurement Fig.1 Fig.2 FCCID:2BWK2-ZC101 _______________________________________________________________________________________________ Page2of2 Fig.3