2BWKL-WXC18Wireless charger

1.If the indicator ring is steadily lit in purple, the product is in standby mode. ワイヤレス充電器 4折5页折好55*77mm LED Indicator Status 2.When the indicator ring is slowly breathing, the product is charging. 3.If the indicator light flashes rapidly, it indicates that the product is in a fault alert state . Possible causes include foreign objects, misalignment of the smartphone's magnetic attachment position, or abnormal input voltage. In this case, please remove any foreign objects and readjust the position, or replace the charging adapter with a compatible one. Wireless Charging Compatibility *15W and Below Wireless Charging: Compatible Models: iPhone 16e and newer models (including iPhone 16e).Examples: iPhone 16e, iPhone 15 Pro Max, iPhone 15 Pro, and other older models. *25W Wireless Charging: Compatible Models:Models above the iPhone 16e (excludingiPhone 16e).Examples: iPhone 16, iPhone 17, and other newer models. *Note If you are using an iPhone 16 series device or newer, you need to update your device to iOS 26 or later. Once updated, you can use a Qi 2.2 charger for 25W fast charging. To check for updates, follow these steps: "Settings" > "General" > "Software Update" Frequently Asked Questions & Solutions *Issue: Slow charging speed or failure to reach 25W. Please check the following: **1. Check iOS VersionEnsure your device has been updated to iOS 26 or later. **2. Check Charger CompatibilityMake sure the charger you are using has an output of 30W or higher and supports the following charging protocol: **3. Check Battery LevelIf your smartphone's battery level is above 50%, the battery optimization feature may reduce the charging speed. This is normal behavior. Type-C adapters from well-known brands (such as Apple and Anker) are compatible. Please do not use uncertified chargers or power banks, or those with falsely advertised specifications. Charging ProtocolVoltage Wireless Charging Output Power 0-7.5W(MAX)9VPD/QC ) 12V PD/QC 0-15W(MAX 0-25W(MAX) 3.3-16V PPS PPS 0-25W(MAX) 3.3-21V 0-25W(MAX) 5-20V AVS Package Contents 1 x 25W Wireless Charger 1 x User Manual Important Notes MagSafe compatible, compatible with cases up to 6mm thick *1. Power AdapterA power adapter is not included with this product. Please prepare one separately. For optimal charging performance, we recommend using a 30W or higher Type-C power adapter. *2. Phone Case CompatibilityThis product is compatible with MagSafe phone cases. However, thicker cases may reduce charging speed. For the best experience, we recommend using an official MagSafe phone case. Please note that non-MagSafe cases from other manufacturers may weaken the magnetic attraction. Usage Precautions *1. High-Power Adapter RecommendedFor optimal performance, use a 30W or higher power adapter. *2. Foreign Object DetectionThis product features foreign object detection. If a foreign object is detected, power output will automatically shut off for safety. *3. Input Over-Current and Over-Voltage ProtectionThis product is equipped with input over-current and over-voltage protection. If used improperly, it may automatically power off or reduce output. Please check for any abnormalities or incorrect usage. *4. Operating EnvironmentUse this product in ambient temperatures between 0–25°C. Do not use it underwater, near fire, or in high-temperatur e (above 40°C) or low-temperature (below -20°C ) environments. Keep out of reach of children. *5. CleaningClean the surface with a dry, soft cloth. Do not use chemicals, soaps, or detergents. *6. Warranty ExclusionsThe warranty does not cover personal injury or product damage caused by improper use or storage. Please follow these precautions to ensure safe use of this product. Note (Precautions for Use) The MagSafe magnetic alignment position on the iPhone is fixed. This product can attach directly to it. Whenever possible, do not use a protective case. Connect your iPhone directly to our magnetic wireless charger for the best charging experience. Secondly, we recommend using an original MagSafe-compatible case (without a rotating stand). Please avoid using the following types of phone cases and accessories: 360° rotating stand cases with built-in phone stands. MagSafe magnetic rings that you have installed yourself. Using these accessories may result in slower charging speeds or overheating. Please be assured that this phenomenon is not directly caused by quality issues with our charger. The stand on the above-mentioned phone case is too thick and too wide, which may interfere with the current of the charging coil. If you encounter such a situation, please replace the phone case immediately or remove the case before attaching the charger. Similarly, magnetic rings that are too thick or improperly installed may also interfere with the current of the charging coil. Customer Support 1.Please send your order number to the following email address or WhatsApp contact. We offer a 2-year warranty. Email address:[email protected] QR code: Note: If you are unable to scan the WhatsApp QR code, please contact us via email. 2.If you do not receive a reply through your preferred contact method (email or WhatsApp) , please try the other method. Also, please check your spam folder. 3.Please do not use email addresses from mobile carriers (e.g., AT&T Mail, Comcast) to send your message. Otherwise, your email may not be delivered. 4.We regularly hold discount promotions and new product trial events. × FCC Caution: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, p…

Text truncated - open the document above for the full version.

1/1 USAgentforServiceofProcessLETTEROFATTESTATION TO: OfficeofEngineeringTechnology FederalCommunicationsCommission 7435OaklandMillsRoad Columbia,MD21046 USAgentforServiceofProcess: CompanyName:HOPEKCORPORATIONINC Address:16755CoyoteBushDrUnit84,SanDiego,CA92127UnitedStates FRN:0034562900 ContactName:YangyangXu TelephoneNo:(561)875-9826 E-mail:[email protected] ThisletteristoconfirmthattheUSAgentforServiceofProcessacceptsresponsibilitytoactas alocalrepresentativeonbehalfofShenzhenXinboruiTechnologyCo.,Ltd TheUSAgentforServiceofProcessisawareofandagreestocomplywiththerequirements outlinedintheFCCEquipmentAuthorizationProgram,ReportandOrderFCC22-84,andclause §2.911. Applicant: CompanyName:ShenzhenXinboruiTechnologyCo.,Ltd ProductDescription:Wirelesscharger FRN:0038529715 GranteeCode:2BWKL FCCID:2BWKL-WXC18 ContactName:FuZhu Address:402,4thFloor,BuildingE,BaifuliIndustrialPark,Shanghenglang,DalangStreet, LonghuaDistrict,Shenzhen TelephoneNo:15012730373 E-mail:[email protected] TheApplicantisawareofandagreestocomplywiththerequirementsoutlinedintheFCC EquipmentAuthorizationProgram,ReportandOrderFCC22-84,andclause§2.911. ThisAgreementisvaliduntil(Permanentlyvalid). Date:2026/07/02 Applicant’sName: ShenzhenXinboruiTechnologyCo.,Ltd USAgentforServiceofProcess’sName: HOPEKCORPORATIONINC Title:CEOTitle:Manager SignatureSignature

Rev 1/26/2023 Shenzhen Xinborui Technology Co., Ltd Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: June 16, 2026 Ref: Attestation Statements Part 2.911(d)(5)(i) Filing FCC ID: 2BWKL-WXC18 [Shenzhen Xinborui Technology Co., Ltd] certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. [Shenzhen Xinborui Technology Co., Ltd] certifies that the equipment for which authorization is sought does not include cybersecurity or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors and assignees, including equipment with integrated Kaspersky Lab, Inc. (or any of its successors and assignees) cybersecurity or anti-virus software pursuant to DA-24-886 and KDB 986446 D01 Covered Equipment Guidance section B(2a). Device is inherently compliant based on hardware limitations or software controls. or A Software Bill of Materials (SBOM) is provided to the TCB for review, and The end-user or third parties cannot install additional software on this device. Sincerely, (Applicant signature) (Applicant printed name) Fu Zhu Rev 1/26/2023 Shenzhen Xinborui Technology Co., Ltd Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: June 16, 2026 Ref: Attestation Statements Part 2.911(d)(5)(ii) Filing FCC ID: 2BWKL-WXC18 [Shenzhen Xinborui Technology Co., Ltd] certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Sincerely, (Applicant signature) (Applicant printed name) Fu Zhu

Shenzhen Xinborui Technology Co., Ltd Family models declaration letter June 16, 2026 We Shenzhen Xinborui Technology Co., Ltd Of 402, 4th Floor, Building E, Baifuli Industrial Park, Shanghenglang, Dalang Street, Longhua District, Shenzhen Declare under our sole responsibility that the product FCC ID: 2BWKL-WXC18 Product: Wireless charger Model Number: WXC18, WXC19, WXC20, WXC21, WXC22, WXC23 All the models are the same circuit and module, except the appearance colour and model No.. Fu Zhu/ CEO E-mail : [email protected] Phone : 15012730373 Fax : 15012730373 Address : 402, 4th Floor, Building E, Baifuli Industrial Park, Shanghenglang, Dalang Street, Longhua District, Shenzhen

Shenzhen Xinborui Technology Co., Ltd Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: July 2, 2026 Subject; Request for Confidentiality FCC ID: 2BWKL-WXC18 To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure Software Security Requirements for UNII devices In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: Fu Zhu Title: CEO

Effective Date: April 2, 2020 QSF 7.6.4-8 – Agent Authorization Letter Template Page 1 of 1 Revision Date: Revision: 0 Shenzhen Xinborui Technology Co., Ltd Date: June 16, 2026 Product Model Number: WXC18, WXC19, WXC20, WXC21, WXC22, WXC23 FCC ID: 2BWKL-WXC18 To whom it may concern, Re: Product Certification Representative Authorization Letter We authorize QAI Laboratories Ltd. 3980 North Fraser Way, Burnaby B.C. Canada V5J 5K5 to act on our behalf on all matters concerning the above named equipment. This shall include the following:  Testing  Approval applications and procedures We declare that QAI Laboratories Ltd. is allowed to forward all information related to the approval project to the applied certification body and to the notification entities and to discuss any issues concerning the approval application. Any and all acts carried out by QAI Laboratories Ltd. on our behalf shall have the same effect as acts of our own. By: Contact Listed on FCC Wesbite Title: CEO Email: [email protected] Telephone: 15012730373 On behalf of: Shenzhen Xinborui Technology Co., Ltd

Ext Photos Model: WXC18 Photo 1 Photo 2 Photo 3 Photo 4 Photo 5 Photo 6

The back of the product

Int Photos Model: WXC18 Photo 1 Photo 2 Photo 3 Photo 4 Photo 5 Photo 6 Photo 7 Photo 8 ANT

- Page 1 of 11 - Report No.: HB20260610004E-02 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com RF EXPOSURE Test Report Product: Wireless charger Trade Mark: FEEKI Model Number: WXC18 FCC ID: 2BWKL-WXC18 Prepared for Shenzhen Xinborui Technology Co., Ltd 402, 4th Floor, Building E, Baifuli Industrial Park, Shanghenglang, Dalang Street, Longhua District, Shenzhen Prepared by Shenzhen HongBiao Certification& Testing Co., Ltd Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen, China Tel.: +86-755-2998 9321 Fax.: +86-755-2998 5110 Website: http://www.sz-hongbiao.com - Page 2 of 11 - Report No.: HB20260610004E-02 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com Table of Contents 1 GENERAL DESCRIPTION ..................................................................................................................................... 5 1.1 DESCRIPTION OF EUT ................................................................................................................................................ 5 1.2 TEST MODE .............................................................................................................................................................. 5 1.3 TEST SETUP .............................................................................................................................................................. 5 1.4 ANCILLARY EQUIPMENT .............................................................................................................................................. 5 2 TEST FACILITIES AND ACCREDITATIONS .............................................................................................................. 6 2.1 TEST LABORATORY ..................................................................................................................................................... 6 2.2 ENVIRONMENTAL CONDITIONS ..................................................................................................................................... 6 2.3 MEASUREMENT UNCERTAINTY ..................................................................................................................................... 6 2.4 TEST SOFTWARE ........................................................................................................................................................ 6 3 LIST OF TEST EQUIPMENT .................................................................................................................................. 7 4 RF EXPOSURE..................................................................................................................................................... 8 4.1 MAXIMUM PERMISSIBLE EXPOSURE .............................................................................................................................. 8 4.1.1. Limit ............................................................................................................................................................ 8 4.1.2. Test Procedures ........................................................................................................................................... 8 4.1.3. Test Setup .................................................................................................................................................... 8 4.1.4. Test Result ................................................................................................................................................... 8 5 PHOTOGRAPHS OF THE TEST SETUP ..................................................................................................................11 - Page 3 of 11 - Report No.: HB20260610004E-02 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com TEST RESULT CERTIFICATION Applicant’s Name ................. : Shenzhen Xinborui Technology Co., Ltd Address ................................. : 402, 4th Floor, Building E, Baifuli Industrial Park, Shanghenglang, Dalang Street, Longhua District, Shenzhen Manufacturer's Name .......... : Shenzhen Xinborui Technology Co., Ltd Address ................................. : 402, 4th Floor, Building E, Baifuli Industrial Park, Shanghenglang, Dalang Street, Longhua District, Shenzhen Product description Product name ........................ : Wireless charger Model Number ....................... : WXC18 Standards ............................. : FCC CFR 47 PART 1 , 1.1310 Test procedure ....................... : KDB 680106 D01 Wireless Power Transfer v04 This device described above has been tested by Shenzhen HongBiao Certification& Testing Co., Ltd and the test results show that the equipment under test (EUT) is in compliance with the EMC requirements. And it is applicable only to the tested sample identified in the report. Date of Test ........................................... : Date (s) of performance of tests ............. : June 10, 2026~June 16, 2026 Test Result .............................................. : Pass Testing Engineer : ( Z o e Su) Technical Manager : (M i n g L i u) Authorized Signatory : (L e o S u) - Page 4 of 11 - Report No.: HB20260610004E-02 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com Revision History Revised No. Date of Issu…

Text truncated - open the document above for the full version.

- Page 1 of 32 - Report No.: HB20260610004E-01 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com Test Report Product: Wireless charger Trade Mark: FEEKI Model Number: WXC18 FCC ID: 2BWKL-WXC18 Prepared for Shenzhen Xinborui Technology Co., Ltd 402, 4th Floor, Building E, Baifuli Industrial Park, Shanghenglang, Dalang Street, Longhua District, Shenzhen Prepared by Shenzhen HongBiao Certification& Testing Co., Ltd Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen, China Tel.: +86-755-2998 9321 Fax.: +86-755-2998 5110 Website: http://www.sz-hongbiao.com - Page 2 of 32 - Report No.: HB20260610004E-01 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com Table of Contents 1 GENERAL DESCRIPTION ..................................................................................................................................... 5 1.1 DESCRIPTION OF EUT ................................................................................................................................................ 5 1.2 TEST MODE .............................................................................................................................................................. 5 1.3 TEST SETUP .............................................................................................................................................................. 6 1.4 POWER SETTING CONFIGURATION PARAMETERS ............................................................................................................... 6 1.5 ANCILLARY EQUIPMENT .............................................................................................................................................. 6 2 SUMMARY OF TEST RESULT ............................................................................................................................... 7 3 TEST FACILITIES AND ACCREDITATIONS .............................................................................................................. 8 3.1 TEST LABORATORY ..................................................................................................................................................... 8 3.2 ENVIRONMENTAL CONDITIONS ..................................................................................................................................... 8 3.3 MEASUREMENT UNCERTAINTY ..................................................................................................................................... 8 3.4 TEST SOFTWARE ........................................................................................................................................................ 9 4 LIST OF TEST EQUIPMENT .................................................................................................................................10 5 TEST ITEM AND RESULTS ...................................................................................................................................12 5.1 ANTENNA REQUIREMENT .......................................................................................................................................... 12 5.2 CONDUCTED EMISSION ............................................................................................................................................. 13 5.3 RADIATED EMISSION ................................................................................................................................................ 17 5.4 OCCUPIED BANDWIDTH ............................................................................................................................................ 22 6 PHOTOGRAPHS OF THE TEST SETUP ..................................................................................................................24 7 PHOTOGRAPHS OF THE EUT..............................................................................................................................26 - Page 3 of 32 - Report No.: HB20260610004E-01 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com TEST RESULT CERTIFICATION Applicant’s Name ................. : Shenzhen Xinborui Technology Co., Ltd Address ................................. : 402, 4th Floor, Building E, Baifuli Industrial Park, Shanghenglang, Dalang Street, Longhua District, Shenzhen Manufacturer's Name .......... : Shenzhen Xinborui Technology Co., Ltd Address ................................. : 402, 4th Floor, Building E, Baifuli Industrial Park, Shanghenglang, Dalang Street, Longhua District, Shenzhen Product description Product name ........................ : Wireless charger Model Number ....................... : WXC18 Standards ............................. : FCC Part 15C Test procedure ....................... : IEEE/ANSI C63.10-2020+Cor. 1-2023 This device described above has been tested by Shenzhen HongBiao Certification& Testing Co., Ltd and the test results show that the equipment under test (EUT) is in compliance with the EMC requirements. And it is applicable only to the tested sample identified in the report. Date of Test ........................................... : Date (s) of performance of tests ............. : June 10, 2026~June 16, 2026 Test Result .............................................. : Pass Testing Engineer : ( Z o e Su) Technical Manager : (M i n g Liu) Authorized Signatory : (L e o S u) - Page 4 of 32 - Report No.: HB20260610004E-01 Add:Ro…

Text truncated - open the document above for the full version.

SPECIFICATION FOR APPROVAL 1.MECHANICAL DIMENSION (UNIT:mm) 2.SCHEMATICS: Note: 0.08 * 80 shares / 11 turns / add 20 in the middle / 1.0 magnet sheet ABC D2EHI 42.5±0.0520.5±0.5 0.8±0.0640±34±22.5MAX 3.WINDING： STE P START-FINISHWIRE TYPETURNSTAPE RE M AR N1S-F silk-covered wire ⌀ 0.08*80 2UEW 11TS (Ref) 4.ELECTRICAL SPECIFICATION: ITEMLDCR temperature HI-POT TES T CON Coil with magnetic sheet S-F Normal temperature 100KHz,0.25V AT 25°C SPEC 8.1uH±10% 67mΩ Max0-80°C 5.BILF OF MATERIAL： NO.ITEMMATERIAL SPECIFICATIONMANUFACTURER SGS NO. 1 Hot air line Hot air line: 0.08 * 80 strands NANJINGJINNINGCO,LT D 2 Lead-free tin rod Lead-free tin rod QIAODO 3 magnetic sheet 42.5*0.8 mang anese-zinc hard magnetic sheet with L-sh aped slot TAIYI CO.,LTD 4 glue Yellow Glue 999 LIANCHENG CO.,LTD 5 high-temperature adhesive tape 3mm wide heat-resistant adhesive tape CUDAK CO.,LTD 6 gum ⌀ 41.8*0.1CUDAK CO.,LTD 7 PART NO TITLE ELECT AP DRA 何 Shenzhen Xinborui Technology Co., Ltd 402, 4th Floor, Building E, Baifuli Industrial Park, Shanghenglang, Dalang Street, Longhua District, Shenzhen

Photographs of the Test Setup Model: WXC18 Radiated Emission Below 30MHz Radiated Emission Above 30MHz Conducted emission MPE