2BWLC-LIM-EP15MSPBLimitless Ultra 15,000mAh Power Bank

Ultra 15,000mAh Power Bank Quick Start Guide ™ AC Plug, Retractable Cables, Built-In Adapters, WHAT’S INCLUDED • (1) Ultra 15,000mAh Power Bank • (1) Type-C to Lightning® Adapter • (1) Type-C to Micro Adapter • (1) Magnetic Ring • (1) Faux Leather Case & Carrying Strap COMPONENTS Digital Display 2x Retractable Type-C Cables Wireless Magnetic Charger Type-C to Micro Adapter Slide-Out Phone Stand Type-C to Lightning® Adapter Retractable AC Plug Flashlight / Power Button 1. 2. 3. 4. 5. 6. 7. 8. Kickstand Adapter Storage (on Each Side) Flashlight 2x USB Ports Magnetic Ring 9. 10. 11. 12. 13. Select your compatible charging method from below and connect the Ultra 15,000mAh Power Bank to a device. The device will automatically begin to charge. See back for compatibility list. •Built-In Cables •Adapter (Lightning® / Micro) •Wireless Magnetic Charger •USB Ports CHARGING YOUR DEVICE 3 4 1 2 5 6 7 8 9 10 13 11 12 Fast-Charging Icon: You'll see a green lightning bolt icon when a device capable of fast-charging is connected to the Power Bank using the USB Ports, Built-In Cables or the Wireless Magnetic Charger. Keep in mind that some devices might not display this green icon, but they will still receive the fastest charging speed the Power Bank can deliver and the device can accept. Extending / Retracting the Type-C Cable: Extend the Cable and connect the Type-C end to a compatible device. T he device will begin to charge. The Retractable Cable can stop at any point and then pull again to retract. When not in use, ensure the cable is fully retracted to prevent damage or tangling. NOTE: Do not over ext end the cable. Doing so may damage the Power Bank. Charging a Device via Type-C to Lightning® / Micro Adapter: Locate the Retractable Type-C Cable. Plug the Type-C end directly into the Adapter opening (located in the cable slot). Attach the Adapter to the Type-C connector, then plug it into your device. The device will begin to charge. Adapter Storage Charging via Wireless Magnetic Charger: Place your MagSafe® compatible phone directly onto the Wireless Magnetic Charger. The phone will automatically align magnetically and begin charging. The Magnetic Wireless Charger supports both portrait and landscape viewing modes. NOTE: the Phone Stand is NOT required to use the magnetic charging feature. For phones that are not MagSafe® compatible, use the included Magnetic Ring to enable magnetic attachment. ▪Step 1: Clean the back of your phone or phone case before installation. ▪Step 2: Remove the adhesive backing from the Magnetic Ring. ▪Step 3: Align the Ring in the center of your phone or case and press firmly. ▪Step 4: Allow the adhesive to fully bond before use, then proceed to charge a phone. Once installed, the phone can magnetically attach to the Wireless Magnetic Charger for wireless charging in both portrait and landscape mode. USING THE MAGNETIC RING Recharging the Power Bank: Extend the AC Plug and connect to a wall outlet. The Digital Battery Level Indicator will blink while charging until it reaches 100%. A green Fast-Charging Icon will appear once plugged into the wall. NOTE: Only the second digit blinks while charging the Power Bank. Checking the Battery Level: Press the Power Button to show the current battery capacity on the Digital Display or, you can check the Battery Level by connecting a device. IMPORTANT: For best performance, install the Magnetic Ring on the outside of the phone case. Thick cases or metal accessories may interfere with charging performance. Repositioning the Ring after installation may reduce adhesive strength. Charging via USB Ports: Connect a compatible USB charging cable directly into one of the USB output ports located on the Power Bank. Once connected, charging will begin automatically. Step 1Step 2Step 3Step 4 Pr es s and hold the Flashlight / Power Button to turn the Flashlight on. Continuously click the Power Button to scan through the modes (Standard | S.O.S. | Strobe), or pres s and hold to shut o the Flashlight. USING THE FLASHLIGHT USING THE PHONE HOLDER & KICKSTAND Open the Magnetic Kickstand using the inset on the back of the Power Bank. Slide out the Phone Holder on the bottom. Kickstand Adapter Storage (on Each Side) Flashlight 2x USB Ports Magnetic Ring 9. 10. 11. 12. 13. Charging via Wireless Magnetic Charger: Place your MagSafe® compatible phone directly onto the Wireless Magnetic Charger. The phone will automatically align magnetically and begin charging. The Magnetic Wireless Charger supports both portrait and landscape viewing modes. NOTE: the Phone Stand is NOT required to use the magnetic charging feature. WAIVER & RELEASE By using the Limitless Ultra 15,000mAh Power Bank, you hereby agree that Limitless Innovations, Inc., an Illinois corporation and its aliates (“Limitless”) shall have no liability for any losses associated with property damage, personal injury or loss of life that are incurred by you or by any third party in connection with or relating in any manner whatsoever to your use of the Limitless Ultra 15,000mAh Power Bank. By using the Limitless Ultra 15,000mAh Power Bank, you hereby agree at all times to comply fully with all safety warnings, operating instructions and general safety information in this user manual. By using the Limitless Ultra 15,000mAh Power Bank, you further agree to hold harmless Limitless, (and Limitless’ ocers, directors, shareholders and employees) in connection with any losses sustained by you (including, without limitation, losses arising in whole or in part from property damage, personal injury or loss of life) relating in any manner whatsoever to your use of the Limitless Ultra 15,000mAh Power Bank. COMPATIBILITY Type-C: Galaxy S phones: Galaxy S23, S23+, S23 Ultra, S22, S22+, S22 Ultra, S21 5G, S21+ 5G, S21 Ultra 5G, S20 5G, S20+ 5G, S20 Ultra 5G, S10e, S10, S10+, S10 5G, S8, S8+, S9, S9+ | Galaxy Fold phones: Z Fold, Z Fold2, Z Fold3, Z Fold4, Z Flip, Z Flip 5G, Z Flip3 5G, and Z Flip4 | Galaxy Note p…

Text truncated - open the document above for the full version.

LIMITLESSINNOVATIONS,INC. CoveredEquipmentCertificationAttestationLetter 6/13/2026 FederalCommunicationsCommission AuthorizationandEvaluationDivision 7435OaklandMillsRoad Columbia,MD21046 USA ATTN.:ReviewingEngineer FCCID:2BWLC-LIM-EP15MSPB LIMITLESSINNOVATIONS,INC.(“theapplicant”)certifiesthattheequipmentforwhich authorizationissoughtisnot“covered”equipmentprohibitedfromreceivingan equipmentauthorizationpursuanttosection2.903oftheFCCrules. Note:Iftheequipmentforwhichtheapplicantseeksauthorizationisproducedby anyoftheentitiesidentifiedonthecurrentCoveredList,theapplicantshould includeanexplanationonwhytheequipmentisnot“covered”equipment. LIMITLESSINNOVATIONS,INC.(“theapplicant”)certifiesthat,asofthedateofthe filingoftheapplication,theapplicantisnotidentifiedontheCoveredList(asa specificallynamedentityoranyofitssubsidiariesoraffiliates)asanentityproducing “covered”equipment. LIMITLESSINNOVATIONS,INC.(“theapplicant”)certifiesthattheequipmentforwhich authorizationissoughtdoesnotincludecybersecurityoranti-virussoftwareproducedor providedbyKasperskyLab,Inc.oranyofitssuccessorsandassignees,including equipmentwithintegratedKasperskyLab,Inc.(oranyofitssuccessorsandassignees) cybersecurityoranti-virussoftwarepursuanttoDA-24-886andKDB986446D01 CoveredEquipmentGuidancesectionB(2a). <Signature> Name:RJHoeffleur Title:DirectorofOperations Company:LIMITLESSINNOVATIONS,INC.

LIMITLESSINNOVATIONS,INC. * theapplicantmustdesignateacontactlocatedintheUnitedStatesforpurposesofactingasthe applicant’sagentforserviceofprocess,regardlessofwhethertheapplicantisadomesticorforeign entity.AnapplicantlocatedintheUnitedStatesmaydesignateitselfastheagentforserviceofprocess. U.S.AgentDesignationforServiceofProcess- CertificationAttestationLetter 4/24/2026 TO:FederalCommunicationsCommission 7435OaklandMillsRoad Columbia,MD21046 ATTN.:ReviewingEngineer FCCID:2BWLC-LIM-EP15MSPB FRNofapplicant:0038530648 Persection2.911(d)(7)oftheFCCrules,[ LIMITLESSINNOVATIONS,INC. ](“theapplicant”) certifiesthattheequipmentforwhichauthorizationissoughtisdesignatedtothefollowingU.S. agent*forserviceofprocess: CompanyName:LIMITLESSINNOVATIONS,INC. FCCRegistrationNumber(FRN):0038530648 PhysicalU.S.CompanyAddress:265ExchangeDr,CrystalLake,lL60014 ContactPerson: RJHoeffleur AgentEmailAddress:[email protected] Theabovecontactpersonacceptstheobligationforserviceofprocess. Theapplicantacceptstomaintainanagentfornolessthanoneyearafterthegranteehas terminatedallmarketingandimportationortheconclusionofanyCommission-related proceedinginvolvingtheequipment. ApplicantSigned: Signed: Printedname:RJHoeffleur Title:DirectorofOperations CompanyName:LIMITLESSINNOVATIONS, INC. Date:6/15/2026 AgentSigned(ifdifferentfromApplicant): Signed: Printedname:RJHoeffleur Title: DirectorofOperations CompanyName:LIMITLESSINNOVATIONS, INC. Date:6/15/2026

LIMITLESSINNOVATIONS,INC. DATE:June13,2026 FederalCommunicationsCommission Authorization&EvaluationDivision 7345OaklandMillsRoad Columbia,Maryland21046 AuthoritytoActasAgent Onourbehalf,IappointBTFTestingLab(Shenzhen)Co.,Ltd.(Plant101,201and301,Building1, Block2,TantouIndustrialPark,TantouCommunity,SonggangStreet,Bao'anDistrict, Shenzhen,Guangdong,China)toactasouragentinthepreparationofthisapplicationfor equipmentcertification.Icertifythatsubmitteddocumentsproperlydescribethedeviceor systemforwhichequipmentcertificationissought.Ialsocertifythateachunit manufactured,importedormarketed,asdefinedintheFederalCommunications Commission’sregulationswillhaveaffixedtoitalabelidenticaltothatsubmittedfor approvalwiththisapplication. Forinstanceswhereourauthorizedagentsignstheapplicationforcertificationonour behalf,Iacknowledgethatallresponsibilityforcomplyingwiththetermsandconditions forcertification,stillresideswithLIMITLESSINNOVATIONS,INC.(265 ExchangeDr,CrystalLake,lL60014) <Signature> Name:RJHoeffleur Title:DirectorofOperations Company:LIMITLESSINNOVATIONS,INC.

Date:June13,2026 FederalCommunicationsCommission Authorization&EvaluationDivision 7345OaklandMillsRoad Columbia,Maryland21046 RE:LETTEROFAGENTAUTHORIZATION ToWhomItMayConcern: We,theundersigned,herebyauthorizeComplianceTesting,LLCtoactonourbehalfinallmatters relatingtoapplicationforequipmentauthorization,includingthesigningofalldocumentsrelatingto thesematters. Wealsoherebycertifythatnopartytotheapplicationauthorizedhereunderissubjecttothedenialof benefits,includingFCCbenefits,pursuanttoSection5301oftheAnti-DrugAbuseActof1988,21 U.S.C.853(a). Sincerely, <Signature> Name:RJHoeffleur Title:DirectorofOperations Company:LIMITLESSINNOVATIONS,INC.

DATE:June13,2026 EquipmentAutorisationDivision FederalCommunicationsCommission 7435OaklandMillsRoad Columbia,MD21046 FCCID:2BWLC-LIM-EP15MSPB ProductName:LimitlessUltra15,000mAhPowerBank RequestforConfidentiality PursuanttoSections0.457and0.459ofthecommission’srules,weherebyrequestthat thefollowingdocumentsbeheldconfidential: (Listherethedocumentsforwhichyouareseekingconfidentiality–forexample...)  Schematics Blockdiagram Operationdescription Thesematerialscontaintradesecretsandproprietaryinformationandarenot customarilyreleasedtothepublic.Thepublicdisclosureofthisinformationmightbe harmfultothecompanyandprovideunjustifiedbenefitstoourcompetitors. <Signature> Name:RJHoeffleur Title:DirectorofOperations Company:LIMITLESSINNOVATIONS,INC.

DifferencesDeclaration Towhomconcern, WecompanyLIMITLESSINNOVATIONS,INC. Herebydeclares: Theproductmodel(s) LIM-EP15MSPB-M106,LIM-EP15MSPB-M087,LIM-EP15MSPB-M122,LIM-EP15MSPB-M018,LIM-EP15MSPB- M088,LIM-EP15MSPB-M123,BND-SP15MSPB-M001,BND-SP15MSPB-M124,BND-SP15MSPB-M051,BND-SP1 5MSPB-M017,BND-SP15MSPB-M126,BND-SP15MSPB-M125areidenticalinthePCBlayout,electronic schematicandantennawithLIM-EP15MSPB-M001,onlydifferentinmodelnamesandcolor. Sincerelyyours, <Signature> Name:RJHoeffleur Title:DirectorofOperations Company:LIMITLESSINNOVATIONS,INC. FCCID:2BWLC-LIM-EP15MSPB

FCCID:2BWLC-LIM-EP15MSPBReportNumber:BTF260427R00601 TotalorpartialreproductionofthisdocumentwithoutpermissionoftheLaboratoryisnotallowed.Page1of4 BTFTestingLab(Shenzhen)Co.,Ltd. Plant101,201and301,Building1,Block2,TantouIndustrialPark,TantouCommunity,SonggangStreet,Bao'anDistrict,Shenzhen, Guangdong,China Email:[email protected]:+86-755-23146130http://www.btf-lab.comVersion:1/00 AppendixIIExternalPhotos FCCID:2BWLC-LIM-EP15MSPBReportNumber:BTF260427R00601 TotalorpartialreproductionofthisdocumentwithoutpermissionoftheLaboratoryisnotallowed.Page2of4 BTFTestingLab(Shenzhen)Co.,Ltd. Plant101,201and301,Building1,Block2,TantouIndustrialPark,TantouCommunity,SonggangStreet,Bao'anDistrict,Shenzhen, Guangdong,China Email:[email protected]:+86-755-23146130http://www.btf-lab.comVersion:1/00 FCCID:2BWLC-LIM-EP15MSPBReportNumber:BTF260427R00601 TotalorpartialreproductionofthisdocumentwithoutpermissionoftheLaboratoryisnotallowed.Page3of4 BTFTestingLab(Shenzhen)Co.,Ltd. Plant101,201and301,Building1,Block2,TantouIndustrialPark,TantouCommunity,SonggangStreet,Bao'anDistrict,Shenzhen, Guangdong,China Email:[email protected]:+86-755-23146130http://www.btf-lab.comVersion:1/00 FCCID:2BWLC-LIM-EP15MSPBReportNumber:BTF260427R00601 TotalorpartialreproductionofthisdocumentwithoutpermissionoftheLaboratoryisnotallowed.Page4of4 BTFTestingLab(Shenzhen)Co.,Ltd. Plant101,201and301,Building1,Block2,TantouIndustrialPark,TantouCommunity,SonggangStreet,Bao'anDistrict,Shenzhen, Guangdong,China Email:[email protected]:+86-755-23146130http://www.btf-lab.comVersion:1/00

Label&Location LabelSizeL*W:50mm*20mm FCCID:2BWLC-LIM-EP15MSPB

FCCID:2BWLC-LIM-EP15MSPBReportNumber:BTF260427R00601 TotalorpartialreproductionofthisdocumentwithoutpermissionoftheLaboratoryisnotallowed.Page1of4 BTFTestingLab(Shenzhen)Co.,Ltd. Plant101,201and301,Building1,Block2,TantouIndustrialPark,TantouCommunity,SonggangStreet,Bao'anDistrict,Shenzhen, Guangdong,China Email:[email protected]:+86-755-23146130http://www.btf-lab.comVersion:1/00 AppendixIIIInternalPhotos CoilAntenna FCCID:2BWLC-LIM-EP15MSPBReportNumber:BTF260427R00601 TotalorpartialreproductionofthisdocumentwithoutpermissionoftheLaboratoryisnotallowed.Page2of4 BTFTestingLab(Shenzhen)Co.,Ltd. Plant101,201and301,Building1,Block2,TantouIndustrialPark,TantouCommunity,SonggangStreet,Bao'anDistrict,Shenzhen, Guangdong,China Email:[email protected]:+86-755-23146130http://www.btf-lab.comVersion:1/00 FCCID:2BWLC-LIM-EP15MSPBReportNumber:BTF260427R00601 TotalorpartialreproductionofthisdocumentwithoutpermissionoftheLaboratoryisnotallowed.Page3of4 BTFTestingLab(Shenzhen)Co.,Ltd. Plant101,201and301,Building1,Block2,TantouIndustrialPark,TantouCommunity,SonggangStreet,Bao'anDistrict,Shenzhen, Guangdong,China Email:[email protected]:+86-755-23146130http://www.btf-lab.comVersion:1/00 FCCID:2BWLC-LIM-EP15MSPBReportNumber:BTF260427R00601 TotalorpartialreproductionofthisdocumentwithoutpermissionoftheLaboratoryisnotallowed.Page4of4 BTFTestingLab(Shenzhen)Co.,Ltd. Plant101,201and301,Building1,Block2,TantouIndustrialPark,TantouCommunity,SonggangStreet,Bao'anDistrict,Shenzhen, Guangdong,China Email:[email protected]:+86-755-23146130http://www.btf-lab.comVersion:1/00

Total or partial reproduction of this document without permission of the Laboratory is not allowed. Page 1 of 18 BTF Testing Lab (Shenzhen) Co., Ltd. Plant 101, 201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, Guangdon g, China Email: [email protected] Tel: +86-755-23146130 http://www.btf-lab.com Version: 1/00 Health Test Report For Applicant name: LIMITLESS INNOVATIONS, INC. Address: 265 Exchange Dr, Crystal Lake, lL 60014 EUT name: Limitless Ultra 15,000mAh Power Bank Brand name: LIMITLESS,BOUNDLESS Model number: LIM-EP15MSPB-M001 Series model number: LIM-EP15MSPB-M106,LIM-EP15MSPB-M087,LIM-EP15MSPB- M122,LIM-EP15MSPB-M018,LIM-EP15MSPB-M088,LIM- EP15MSPB-M123,BND-SP15MSPB-M001,BND-SP15MSPB- M124,BND-SP15MSPB-M051,BND-SP15MSPB-M017,BND- SP15MSPB-M126,BND-SP15MSPB-M125 FCC ID: 2BWLC-LIM-EP15MSPB Issued By Company name: BTF Testing Lab (Shenzhen) Co., Ltd. Address: Plant 101, 201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, Guangdong, China Report number: BTF260427R00602 Test standards: 47 CFR Part 1 Subpart I Section 1.1310 Test conclusion: Pass Date of sample receipt: 2026-04-27 Test date: 2026-04-28 to 2026-06-10 Date of issue: 2026-06-11 Prepared by: Approved by: Chris Liu/Project engineer Ryan.CJ /EMC manager Note: All the test results in this report only related to the testing samples. Which can be duplicated completely for the legal use with approval of applicant; it shall not be reproduced except in full without the written approval of BTF Testing Lab (Shenzhen) Co., Ltd., All the objections should be raised within thirty days from the date of issue. To validate the report, you can contact us. Report Number: BTF260427R00602 Total or partial reproduction of this document without permission of the Laboratory is not allowed. Page 2 of 18 BTF Testing Lab (Shenzhen) Co., Ltd. Plant 101, 201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, Guangdon g, China Email: [email protected] Tel: +86-755-23146130 http://www.btf-lab.com Version: 1/00 Revision History Version Issue date Revisions content R_V0 2026-06-11 Original Report Number: BTF260427R00602 Total or partial reproduction of this document without permission of the Laboratory is not allowed. Page 3 of 18 BTF Testing Lab (Shenzhen) Co., Ltd. Plant 101, 201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, Guangdon g, China Email: [email protected] Tel: +86-755-23146130 http://www.btf-lab.com Version: 1/00 Table of Contents 1 Introduction ........................................................................................................................................................... 4 1.1 Laboratory Location ................................................................................................................................... 4 1.2 Laboratory Facility ..................................................................................................................................... 4 1.3 Announcement ........................................................................................................................................... 4 2 Product Information ............................................................................................................................................. 5 2.1 Application Information .............................................................................................................................. 5 2.2 Manufacturer Information ........................................................................................................................... 5 2.3 Factory Information .................................................................................................................................... 5 2.4 General Description of Equipment under Test (EUT) ................................................................................ 5 2.5 Technical Information ................................................................................................................................ 5 3 Test Equipment List ............................................................................................................................................. 6 4 Applied Reference Documents ........................................................................................................................... 6 5 Test Auxiliary Equipment .................................................................................................................................... 6 6 Test Requirement ................................................................................................................................................. 7 7 Test Settings ......................................................................................................................................................... 8 8 Exposure Assessment ......................................................................................................................................... 9 8.1 E-Field Strength Test Date ........................................................................................................................ 9 8.2 H-Field Strength Test Date: ..................................................................................................................... 10 8.3 Estimated Model ...................................................................................................................................... 12 8.4 Comparison of evaluation data and test data .......................................................................................... 14 9 Test Setup Photos ...................................................................................................................…

Text truncated - open the document above for the full version.

Total or partial reproduction of this document without permission of the Laboratory is not allowed. Page 1 of 26 BTF Testing Lab (Shenzhen) Co., Ltd. Plant 101, 201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, Guangdon g, China Email: [email protected] Tel: +86-755-23146130 http://www.btf-lab.com Version: 1/00 Health Test Report For Applicant name: LIMITLESS INNOVATIONS, INC. Address: 265 Exchange Dr, Crystal Lake, lL 60014 EUT name: Limitless Ultra 15,000mAh Power Bank Brand name: LIMITLESS,BOUNDLESS Model number: LIM-EP15MSPB-M001 Series model number: LIM-EP15MSPB-M106,LIM-EP15MSPB-M087,LIM-EP15MSPB- M122,LIM-EP15MSPB-M018,LIM-EP15MSPB-M088,LIM- EP15MSPB-M123,BND-SP15MSPB-M001,BND-SP15MSPB- M124,BND-SP15MSPB-M051,BND-SP15MSPB-M017,BND- SP15MSPB-M126,BND-SP15MSPB-M125 FCC ID: 2BWLC-LIM-EP15MSPB Issued By Company name: BTF Testing Lab (Shenzhen) Co., Ltd. Address: Plant 101, 201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, Guangdong, China Report number: BTF260427R00601 Test standards: FCC CFR Title 47 Part 15 Subpart C Test conclusion: Pass Date of sample receipt: 2026-04-27 Test date: 2026-04-28 to 2026-06-10 Date of issue: 2026-06-11 Prepared by: Approved by: Chris Liu/Project engineer Ryan.CJ /EMC manager Note: All the test results in this report only related to the testing samples. Which can be duplicated completely for the legal use with approval of applicant; it shall not be reproduced except in full without the written approval of BTF Testing Lab (Shenzhen) Co., Ltd., All the objections should be raised within thirty days from the date of issue. To validate the report, you can contact us. Report Number: BTF260427R00601 Total or partial reproduction of this document without permission of the Laboratory is not allowed. Page 2 of 26 BTF Testing Lab (Shenzhen) Co., Ltd. Plant 101, 201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, Guangdon g, China Email: [email protected] Tel: +86-755-23146130 http://www.btf-lab.com Version: 1/00 Revision History Version Issue date Revisions content R_V0 2026-06-11 Original Report Number: BTF260427R00601 Total or partial reproduction of this document without permission of the Laboratory is not allowed. Page 3 of 26 BTF Testing Lab (Shenzhen) Co., Ltd. Plant 101, 201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, Guangdon g, China Email: [email protected] Tel: +86-755-23146130 http://www.btf-lab.com Version: 1/00 Table of Contents 1 Introduction ............................................................................................................................................................... 4 1.1 Laboratory Location .......................................................................................................................................... 4 1.2 Laboratory Facility ............................................................................................................................................ 4 1.3 Announcement ................................................................................................................................................. 4 2 Product Information ................................................................................................................................................. 5 2.1 Application Information ..................................................................................................................................... 5 2.2 Manufacturer Information ................................................................................................................................. 5 2.3 Factory Information .......................................................................................................................................... 5 2.4 General Description of Equipment under Test (EUT) ...................................................................................... 5 2.5 Technical Information ....................................................................................................................................... 5 3 Test Information ........................................................................................................................................................ 6 3.1 Test Standards ................................................................................................................................................. 6 3.2 Summary of Test .............................................................................................................................................. 6 3.3 Uncertainty of Test ........................................................................................................................................... 6 3.4 Additions to, deviations, or exclusions from the method .................................................................................. 6 3.5 Test Auxiliary Equipment .................................................................................................................................. 6 3.6 Test Equipment List .......................................................................................................................................... 7 4 Test Configuration .................................................................................................................................................... 9 4.1 Environment Condition ..................................................................................................................................... 9 4.2 Test mode ......................................................................................................................................................... 9 5 Technical requirement…

Text truncated - open the document above for the full version.

FCCID:2BWLC-LIM-EP15MSPBReportNumber:BTF260427R00601 TotalorpartialreproductionofthisdocumentwithoutpermissionoftheLaboratoryisnotallowed.Page1of2 BTFTestingLab(Shenzhen)Co.,Ltd. Plant101,201and301,Building1,Block2,TantouIndustrialPark,TantouCommunity,SonggangStreet,Bao'anDistrict,Shenzhen, Guangdong,China Email:[email protected]:+86-755-23146130http://www.btf-lab.comVersion:1/00 AppendixITestSetupPhotos EmissionsinNon-restrictedFrequencyBands(30MHz–1GHz) EmissionsinNon-restrictedFrequencyBands(Blow30MHz) FCCID:2BWLC-LIM-EP15MSPBReportNumber:BTF260427R00601 TotalorpartialreproductionofthisdocumentwithoutpermissionoftheLaboratoryisnotallowed.Page2of2 BTFTestingLab(Shenzhen)Co.,Ltd. Plant101,201and301,Building1,Block2,TantouIndustrialPark,TantouCommunity,SonggangStreet,Bao'anDistrict,Shenzhen, Guangdong,China Email:[email protected]:+86-755-23146130http://www.btf-lab.comVersion:1/00 ACPowerLineConductedEmission