2BWQ2-Q8Projector

App Store In the App Store, applications can be installed with one click, and they can be used directly after installation. Our company also brings the applications to the market, enabling users to obtain and use them easily and conveniently. Networking Setting Language Setting Other Setting BT Setting Settings - Networking Setting - WIFI setting, WIFI select objective WIFI ID and input password to connect internet. Settings - Language Setting, enter to setup language and select input method. Setting - Other Setting, enter to get Application setting, Factory Reset Setting, and Developer opinions. Projection Setting Setting - Projector setting, enter to setup projection mode, keystone correction. Date And Time Setting Setting - Date And Time Setting, enter to setup timezone, timeformat, dateformat, date and time. Wireless Screen Safety instructionsDisclaim FCC Statement Ensure that Android devices(phone,pad,ect)are in the same local wireless LAN with these devices Please pay attention to important information related to the operation and maintenance of the projector. You should read this information carefully to avoid problems. Following safety instructions will increase the life of projector. Please consult the qualified personnel for installation and repair services, and do not use damaged wires, accessories and other peripherals. Projector should be kept away from flammable, explosive, strong electromagnetic interference (large radar stations, power stations, substations),etc. Strong ambient light (avoid direct sunlight), etc. Do not cover projector vents. Please use the original power adapter. 2Keep adequate ventilation and make sure vents are not covered to avoid projector overheating 2When projector is working, please do not look directly into the lens, the strong light will flash your eyes and cause slight pain. Do not bend or drag the power cord. Do not put power cord under projector or any heavy objects. Do not cover other soft materials on power cord. Do not heat the power cord. Avoid touching power adaptor with wet hands. This manual is general instructions, The pictures and functions in this manual should subject to the actual product. Our company is devoting to improve product performance, we reserve the right to modify product functions and interface described in this manual without notice. Please keep your device properly. We are not responsible for any loss caused by wrong operation of software/hardware oг repairing or any other reasons. We are not responsible for any loss of any third party claims. This manual has been carefully checked by professional engineer, please understand for any inevitable omissions. 1.This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference. (2)This device must accept any interference received, including interference that may cause undesired operation. 2.Changes or modifications not expressly approved by the party responsible for compliance could void the user?s authority to operate the equipment. Note:This equipment has been tested and found to comply with the limits for a class B digital device,pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequence energy and,if not installed and used in accordance with the instructions,may cause harmful interference to radio communications.However,there is no guarantee that interference will not occur in a particular installation.if this equipmemt does cause harmful interference to radio or television reception,which can be determined by turning the equipment off and on,the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. lncrease the separation between the equipment and receiver. Connect the equipment into an autlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement, This equipment should be installed and operated with a minumum distance of 20cm between the radiator and your body. (ZX- EN-HY 30020241012) Operations en Devices: Home ScreenApplicationsScreenCastOpen ScreenCast serviceTurn on the phone mirroringConnection. After connecting projector to other output device, enter HDMI or Audio/Video. Signal TM Audio Setting Setting . Audio setting, enter to adjust volume. Settings - BT setting, BT click Refresh Device and choose objective device to pair. Settings Enter to setup Networking, Bluetooth, Language, Other Setting, Projection,Audio,Date And Time Air inlet Lens HDMI Quick Installation Guide ROTATE Smart Projector BluetoothCatalogue ��*���mm

Rev1/26/2023 YingShidaiIntelligentTechnology(Shenzhen)Co.,Ltd. FederalCommunicationsCommission AuthorizationandEvaluationDivision 7435OaklandMillsRoad Columbia,MD21046 USA Date:2026-08-14 Ref:AttestationStatementsPart2.911(d)(5)(i)Filing FCCID:2BWQ2-Q8 YingShidaiIntelligentTechnology(Shenzhen)Co.,Ltd.certifiesthattheequipmentforwhich authorizationissoughtisnot“covered”equipmentprohibitedfromreceivinganequipment authorizationpursuanttosection2.903oftheFCCrules. YingShidaiIntelligentTechnology(Shenzhen)Co.,Ltd. certifiesthattheequipmentforwhich authorizationissoughtdoesnotincludecybersecurityoranti-virussoftwareproducedorprovidedby KasperskyLab,Inc.oranyofitssuccessorsandassignees,includingequipmentwithintegratedKaspersky Lab,Inc.(oranyofitssuccessorsandassignees)cybersecurityoranti-virussoftwarepursuanttoDA-24- 886andKDB986446D01CoveredEquipmentGuidancesectionB(2a). Deviceisinherentlycompliantbasedonhardwarelimitationsorsoftwarecontrols. or ASoftwareBillofMaterials(SBOM)isprovidedtotheTCBforreview,and Theend-userorthirdpartiescannotinstalladditionalsoftwareonthisdevice. Sincerely, (Applicantsignature) (Applicantprintedname)QiuMiaoQing Rev1/26/2023 YingShidaiIntelligentTechnology(Shenzhen)Co.,Ltd. FederalCommunicationsCommission AuthorizationandEvaluationDivision 7435OaklandMillsRoad Columbia,MD21046 USA Date:2026-08-14 Ref:AttestationStatementsPart2.911(d)(5)(ii)Filing FCCID:2BWQ2-Q8 YingShidaiIntelligentTechnology(Shenzhen)Co.,Ltd. certifiesthat,asofthedateofthefiling oftheapplication,theapplicantisnotidentifiedontheCoveredList(asaspecificallynamedentityor anyofitssubsidiariesoraffiliates)asanentityproducing“covered”equipment. Sincerely, (Applicantsignature) (Applicantprintedname) QiuMiaoQing

YingShidaiIntelligentTechnology(Shenzhen)Co.,Ltd. ProductSimilarityDeclaration EUTDescription:Projector ModelNo.:Q8 SeriesModel:Q7,Q9,Q10,Q11,Q12,Q13 FCCID:2BWQ2-Q8 We(YingShidaiIntelligentTechnology(Shenzhen)Co.,Ltd.) herebystatethatallthemodelsareelectricalidenticalincluding thesamesoftwareparameterandhardwaredesign(i.e.,circuit design,PCBLayout,RFmodule/circuit,antennatype(s)and antennalocation,componentsonPCB,etc.,),samemechanical structureanddesign(includingproductenclosure,materials,etc.,), theonlydifferenceisthemodelnameandcolor. Signature: Name:QiuMiaoQing Title:Manager Place,date:Aug.11,2026

YingShidaiIntelligentTechnology(Shenzhen)Co., Ltd. Date：2026-08-14 ProductModelNumber:Q8,Q7,Q9,Q10,Q11,Q12,Q13 FCCID：2BWQ2-Q8 Towhomitmayconcern, Re:ProductCertificationRepresentativeAuthorizationLetter WeauthorizeQAILaboratoriesLtd.3980NorthFraserWay,BurnabyB.C. CanadaV5J5K5toactonourbehalfonallmattersconcerningtheabove namedequipment. Thisshallincludethefollowing: Testing Approvalapplicationsandprocedures WedeclarethatQAILaboratoriesLtd.isallowedtoforwardallinformation relatedtotheapprovalprojecttotheappliedcertificationbodyandtothe notificationentitiesandtodiscussanyissuesconcerningtheapproval application.AnyandallactscarriedoutbyQAILaboratoriesLtd.onour behalfshallhavethesameeffectasactsofourown. By:QiuMiaoQing ContactListedonFCCWesbite Title:Manager Email:[email protected] Telephone:18923474571 Onbehalfof:YingShidaiIntelligentTechnology(Shenzhen)Co.,Ltd.

YingShidaiIntelligentTechnology(Shenzhen)Co., Ltd. OfficeofEngineeringTechnology FederalCommunicationsCommission 7435OaklandMillsRoad Columbia,MD21046 USA Date:August14,2026 Subject;RequestforConfidentiality FCCID:2BWQ2-Q8 ToWhomItMayConcern, PursuanttotheprovisionsoftheCommission’srulesTitle47Sections§0.457and§0.459,we arerequestingtheCommissiontowithholdthefollowingattachment(s)asconfidential documentsfrompublicdisclosureindefinitely. Thesedocumentscontaindetailedsystemandequipmentdescriptionsandareconsideredas proprietaryinformationinoperationoftheequipment.Thepublicdisclosureofthese documentsmightbeharmfultoourcompanyandwouldgivecompetitorsanunfairadvantage inthemarket. SchematicDiagram BlockDiagram PartsList OperationalDescription Tune-upProcedure SoftwareSecurityRequirementsforUNIIdevices Inadditionaltoabovementioneddocuments,inordertocomplywiththemarketingregulations inTitle47CFR§2.803andtheimportationrulesinTitle47CFR§2.1204,whileensuringthat businesssensitiveinformationremainsconfidentialuntiltheactualmarketingofnewly authorizeddevices,werequestShortTermConfidentialityofthefollowingattachment(s); ExternalPhotos TestSetupPhotos InternalPhotos UserManual For45days,pursuanttoPublicNoticeDA04-1705. OR For180dayspursuanttoKDB726920D01. Itisourunderstandingthatallmeasurementtestreports,FCCIDlabelformatand correspondenceduringthecertificationreviewprocesscannotbegrantedasconfidential documentsandthisinformationwillbeavailableforpublicreviewoncethegrantofequipment authorizationisissued. Sincerely, Signature: Name:QiuMiaoQing Title: Manager

Page1of4 ReportNo.:FCS202606348 Externalphotos Photo1 Photo2 Page2of4 ReportNo.:FCS202606348 Photo3 Photo4 Page3of4 ReportNo.:FCS202606348 Photo5 Photo6 Page4of4 ReportNo.:FCS202606348 Photo7

LabelandLabelLocation FCCID:2BWQ2-Q8 ThisdevicecomplieswithPart15oftheFCCRules. Operationissubjecttothefollowingtwoconditions: (1)Thisdevicemaynotcauseharmfulinterference; (2)Thisdevicemustacceptanyinterferencereceived, includinginterferencethatmaycauseundesired operation. L*W:4cm*3cm labelandwhitefont

Page1of2ReportNo.:FCS202606348 Internalphotos Photo1 Photo2 Page2of2ReportNo.:FCS202606348 Photo3 Photo4 ANT

Page1of2ReportNo.:FCS202606348 FCCRFExposure EUTDescription:Projector ModelNo.:Q8 SeriesModel:Q7,Q9,Q10,Q11,Q12,Q13 FCCID:2BWQ2-Q8 Equipmenttype:mobiledevice RFExposureEvaluation Limits Thecriterialistedinthefollowingtableshallbeusedtoevaluatetheenvironmentimpactofhuman exposuretoradiofrequency(RF)radiationasspecifiedin1.1307(b) LimitsforMaximumPermissibleExposure(MPE) Frequencyrange (MHz) Electricfield strength (V/m) Magneticfieldstrength (A/m) Powerdensity (mW/cm 2 ) Averagingtime (minutes) (A)LimitsforOccupational/ControlledExposures 0.3–3.06141.63*(100)6 3.0–30 1842/f4.89/f *(900/f 2 ) 6 30–30061.40.1631.06 300–1500f/3006 1500–100,000 5 6 (B)LimitsforGeneralPopulation/UncontrolledExposure 0.3–1.346141.63*(100)30 1.34–30 824/f2.19/f *(180/f 2 ) 30 30–30027.50.0730.230 300–1500f/150030 1500–100,0001.030 f=frequencyinMHz Friistransmissionformula:Pd=(Pout*G)/(4*pi*r 2 ) Where Pd=powerdensityinmW/cm 2 ,Pout=outputpowertoantennain mW;G=gainofantennainlinearscale,Pi=3.1416; R=distancebetweenobservationpointandcenteroftheradiatorincm PdidthelimitofMPE,1mW/cm 2 .Ifweknowthemaximumgainoftheantennaandthetotalpower inputtotheantenna,throughthecalculation,wewillknowthedistancerwheretheMPElimitis reached. TestProcedure SoftwareprovidedbyclientenabledtheEUTtotransmitandreceivedataatlowest,middleandhighest channelindividually. Page2of2ReportNo.:FCS202606348 FluxComplianceServiceLaboratory Room105FloorBaohaoTechnologyBuilding1NO.15GongyeWestRoadHi-TechIndustrial,SongshanlakeDongguan Tel:769-27280901Fax:769-27280901http://www.FCS-lab.com TestResultofRFExposureEvaluation BLE TestModel Conductedpower (dBm) Maxtune-up (mW) Antenna Gain(dBi) Min.distance (cm) ResultLimit 2402 2.49 1.77422.23200.0005898 1.0 2440 2.44 1.75392.23200.0005831 1.0 2480 2.78 1.89672.23200.0006306 1.0 2.4Gwifi TestModel Conductedpower (dBm) Maxtune-up (mW) Antenna Gain(dBi) Min.distance (cm) ResultLimit 802.11b4.172.61222.23200.0008684 1.0 802.11g4.442.77972.23200.0009241 1.0 802.11n204.312.69772.23200.0008969 1.0 5.8Gwifi TestModel Conductedpower (dBm) Maxtune-up (mW) Antenna Gain(dBi) Min.distance (cm) ResultLimit 802.11a2.671.84933.92200.000907254 1.0 802.11n202.661.84503.92200.000905168 1.0 802.11n402.011.58853.92200.000779344 1.0 802.11ac2 0 2.331.71003.92200.000838937 1.0 802.11ac4 0 2.341.71403.92200.000840871 1.0 802.11ac8 0 2.421.74583.92200.000856503 1.0 Conclusion:NoSARisrequired

Page 1 of 43 ReportNo.:FCS202606348W01 FluxComplianceServiceLaboratory Room105FloorBaohaoTechnologyBuilding1NO.15GongyeWestRoadHi-TechIndustrial,SongshanlakeDongguan Tel:0769-27280901Fax:0769-27280901http://www.FCS-lab.com FCCTestReport ReportNo:FCS202606348W01 Issuedfor Applicant: YingShidaiIntelligentTechnology(Shenzhen)Co.,Ltd. Address: Via301Building8,HuafengScienceandTechnologyPark,No. 535,FengtanAvenue,TangweiCommunity,FuhaiStreet,Bao'an District,ShenzhenCity ProductName: Projector BrandName: N/A ModelName: Q8 SeriesModel: Q7,Q9,Q10,Q11,Q12,Q13 FCCID: 2BWQ2-Q8 IssuedBy:FluxComplianceServiceLaboratory Add:Room105FloorBaohaoTechnologyBuilding1NO.15GongyeWestRoadHi-Tech Industrial,SongshanlakeDongguan Tel:0769-27280901Fax:0769-27280901http://www.FCS-lab.com Page 2 of 43 ReportNo.:FCS202606348W01 FluxComplianceServiceLaboratory Room105FloorBaohaoTechnologyBuilding1NO.15GongyeWestRoadHi-TechIndustrial,SongshanlakeDongguan Tel:0769-27280901Fax:0769-27280901http://www.FCS-lab.com TESTRESULTCERTIFICATION Applicant’sName......................: YingShidaiIntelligentTechnology(Shenzhen)Co.,Ltd. Address......................................: Via301Building8,HuafengScienceandTechnologyPark,No.535, FengtanAvenue,TangweiCommunity,FuhaiStreet,Bao'anDistrict, ShenzhenCity Manufacture'sName................: YingShidaiIntelligentTechnology(Shenzhen)Co.,Ltd. Address ...................................... : Via301Building8,HuafengScienceandTechnologyPark,No.535, FengtanAvenue,TangweiCommunity,FuhaiStreet,Bao'anDistrict, ShenzhenCity ProductDescription ProductName ........................... : Projector BrandName...............................: N/A ModelName .............................. : Q8 SeriesModel .............................. : pleaserefertothefirstpageofthereport TestStandards..........................: FCCRulesandRegulationsPart15SubpartC,Section247 TestProcedure..........................: ANSIC63.10-2020+Cor.1-2023+C63.10a-2024+Erratato C63.10a-2024 ThisdevicedescribedabovehasbeentestedbyFluxComplianceServiceLaboratory,thetestresults showthattheequipmentundertest(EUT)isincompliancewiththeFCCrequirements.Anditis applicableonlytothetestedsampleidentifiedinthereport. Thisreportshallnotbereproducedexceptinfull,withoutthewrittenapprovalofFluxCompliance ServiceLaboratory,thisdocumentmaybealteredorrevisedbyFluxComplianceServiceLaboratory, personalonly,andshallbenotedintherevisionofthedocument.. DateofTest..................................: Date(s)ofperformanceoftests.:June25,2026~July8,2026 DateofIssue ................................. :July8,2026 TestResult ..................................... :Pass Testedby: (orangeOuYang) Reviewedby : (Jaydne) Approvedby: (JackWang) Page 3 of 43 ReportNo.:FCS202606348W01 FluxComplianceServiceLaboratory Room105FloorBaohaoTechnologyBuilding1NO.15GongyeWestRoadHi-TechIndustrial,SongshanlakeDongguan Tel:0769-27280901Fax:0769-27280901http://www.FCS-lab.com TableofContentsPage 1.SUMMARYOFTESTRESULTS..............................................................................................6 1.1TESTFACTORY................................................................................................................7 1.2MEASUREMENTUNCERTAINTY.....................................................................................7 2.GENERALINFORMATION.......................................................................................................8 2.1GENERALDESCRIPTIONOFTHEEUT..........................................................................8 2.2BLOCKDIGRAMSHOWINGTHECONFIGURATIONOFSYSTEMTESTED.............10 2.3DESCRIPTIONOFNECESSARYACCESSORIESANDSUPPORTUNITS.................11 2.4EQUIPMENTSLIST.........................................................................................................12 3.6DBBANDWIDTH..................................................................................................................13 3.1Limit..................................................................................................................................13 3.2TestProcedure.................................................................................................................13 3.3Testsetup.........................................................................................................................13 3.4Testresults.......................................................................................................................13 4.CONDUCTEDOUTPUTPOWER...........................................................................................17 4.1LIMIT................................................................................................................................17 4.2TESTPROCEDURE........................................................................................................17 4.3TESTSETUP...................................................................................................................17 4.4TESTRESULTS...............................................................................................................17 5.BANDEDGEANDSPURIOUS(CONDUCTED)....................................................................18 5.1LIMIT................................................................................................................................18 5.2TESTPROCEDURE........................................................................................................18 5.3TESTSETUP...................................................................................................................18 5.4TESTRESULTS...............................................................................................................19 ORIGINALTESTDATA..........................................................................................................19 6.POWERSPECTRALDENSITY..............................................................................................23 6.1LIMIT..........…

Text truncated - open the document above for the full version.

FCCTestReport ReportNo:FCS202606348W02 Issuedfor Applicant: YingShidaiIntelligentTechnology(Shenzhen)Co.,Ltd. Address: Via301Building8,HuafengScienceandTechnologyPark,No. 535,FengtanAvenue,TangweiCommunity,FuhaiStreet,Bao'an District,ShenzhenCity ProductName: Projector BrandName: N/A ModelName: Q8 SeriesModel: Q7,Q9,Q10,Q11,Q12,Q13 FCCID: 2BWQ2-Q8 IssuedBy:FluxComplianceServiceLaboratory Add:Room105FloorBaohaoTechnologyBuilding1NO.15GongyeWestRoadHi-Tech Industrial,SongshanlakeDongguan Tel:769-27280901Fax:769-27280901http://www.FCS-lab.com FluxComplianceServiceLaboratory Room105FloorBaohaoTechnologyBuilding1NO.15GongyeWestRoadHi-TechIndustrial,SongshanlakeDongguan Tel:769-27280901Fax:769-27280901http://www.FCS-lab.com Page2of57ReportNo.:FCS202606348W02 TESTRESULTCERTIFICATION Applicant’sName ...................... : YingShidaiIntelligentTechnology(Shenzhen)Co.,Ltd. Address ...................................... : Via301Building8,HuafengScienceandTechnologyPark,No.535, FengtanAvenue,TangweiCommunity,FuhaiStreet,Bao'anDistrict, ShenzhenCity Manufacture'sName................: YingShidaiIntelligentTechnology(Shenzhen)Co.,Ltd. Address......................................: Via301Building8,HuafengScienceandTechnologyPark,No.535, FengtanAvenue,TangweiCommunity,FuhaiStreet,Bao'anDistrict, ShenzhenCity ProductDescription ProductName...........................: Projector BrandName.............................: N/A ModelName .............................. : Q8 SeriesModel..............................: pleaserefertothefirstpageofthereport TestStandards..........................:FCCRulesandRegulationsPart15SubpartC,Section247 TestProcedure..........................: ANSIC63.10-2020+Cor.1-2023+C63.10a-2024+Erratato C63.10a-2024 ThisdevicedescribedabovehasbeentestedbyFluxComplianceServiceLaboratory,thetestresults showthattheequipmentundertest(EUT)isincompliancewiththeFCCrequirements.Anditis applicableonlytothetestedsampleidentifiedinthereport. Thisreportshallnotbereproducedexceptinfull,withoutthewrittenapprovalofFluxCompliance ServiceLaboratory,thisdocumentmaybealteredorrevisedbyFluxComplianceServiceLaboratory, personalonly,andshallbenotedintherevisionofthedocument.. DateofTest .................................. : Date(s)ofperformanceoftests . :June25,2026~July8,2026 DateofIssue ................................. :July8,2026 TestResult.....................................:Pass Testedby: (orangeOuYang) Reviewedby : (Jayden) Approvedby: (JackWang) FluxComplianceServiceLaboratory Room105FloorBaohaoTechnologyBuilding1NO.15GongyeWestRoadHi-TechIndustrial,SongshanlakeDongguan Tel:769-27280901Fax:769-27280901http://www.FCS-lab.com Page3of57ReportNo.:FCS202606348W02 TableofContentsPage 1.SUMMARYOFTESTRESULTS..............................................................................................6 1.1TESTFACTORY................................................................................................................7 1.2MEASUREMENTUNCERTAINTY.....................................................................................7 2.GENERALINFORMATION.......................................................................................................8 2.1GENERALDESCRIPTIONOFTHEEUT..........................................................................8 2.2BLOCKDIGRAMSHOWINGTHECONFIGURATIONOFSYSTEMTESTED.............10 2.3DESCRIPTIONOFNECESSARYACCESSORIESANDSUPPORTUNITS.................11 2.4EQUIPMENTSLIST.........................................................................................................12 3.6DBBANDWIDTH..................................................................................................................13 3.1Limit..................................................................................................................................13 3.2TestProcedure.................................................................................................................13 3.3Testsetup.........................................................................................................................13 3.4Testresults.......................................................................................................................14 4.CONDUCTEDOUTPUTPOWER...........................................................................................20 4.1limit...................................................................................................................................20 4.2testprocedure..................................................................................................................20 4.3TESTSETUP...................................................................................................................20 4.5testresults........................................................................................................................20 5.POWERSPECTRALDENSITY..............................................................................................21 5.1LIMIT................................................................................................................................21 5.2TESTPROCEDURE........................................................................................................21 5.3TESTSETUP...................................................................................................................21 5.4TESTRESULTS...............................................................................................................22 5.5originaltestdata...............................................................................................................23 6.Bandedgeandspurious(conducted).................................................................................28 6.1LIMIT................................................................................................................................28 6.2TESTPROCEDURE............................................................…

Text truncated - open the document above for the full version.

ShenzhenShunchengdaTechnologyCo., Ltd. SHUNDACHENGTECHNOLOGYCO.,LTD CompanyAddress:4F,BuildingB5,XinfuIndustrialPark,ChongqingRoad,FuyongTown,BaoanDistrict,Shenzhen Tel:0755-27211658Fax:0755-29485750 ProductTechnicalSpecificationDocument SPECIFICATION ProductModelPARTNO:LA31H2450/5500-A33Customer PartNumberCUSTOMERPARTNO: CustomerConfirmationCUSTOMERAPROVEDBY: ConfirmationDateAPPROVEDDATE: B5Building,4thFloor,XinfuIndustrialPark,Chongqing Road,FuyongTown,Bao'anDistrict,Shenzhen No.4/F,BuildingB5,XinfuIndustrialPark,ChongqingRoad,FuyongTown, Bao ' anDistrict,Shenzhen TEL：0755-27211658FAX：0755-29485750 Preparedby: WongChung-po Checkedby: FuXuerong ApprovedBy: ChenHuaming SampleSubmissionDate:FormedOn ProductVersion|DocumentVer- sion (V1.6) ShenzhenShunchengdaTechnologyCo., Ltd. SHUNDACHENGTECHNOLOGYCO.,LTD CompanyAddress:4thFloor,BuildingB5,XinfuIndustrialPark,ChongqingRoad,FuyongTown,Bao'anDistrict, ShenzhenTel:0755-27211658Fax:0755- 29485750 catalogue Tableofcontents SpecificationVersionChangeRecords–VersionReorganizationTrackRecord .......................................................................................3 1.IntroductionOverview ............................................................4 2.ModelPartNumber ...............................................................4 3.Externaldimensionsandtestboardpaddimensions(Dimensions) ...4～5 4.TestCircuitandMatchingCircuit:EvaluationBoardandMatchingCircuits .............................................................................................5 5.ElectricalProperties ...............................................................6 6.CharacteristicCurve...............................................................6 7.DirectionalMap:RadiationPattern..........................................7~10 8.Allowableerrorafterreliabilitytesting:Post-ReliabilityTolerance.........11 9.ReliabilityTest(DependabilityTest) ....................................11～12 10.Reflowsolderingtemperature–Standardconditionsforreflowsoldering ... ..........................................................................................12 11.PackagingSize:DimensionsandSpecifications ..............................13 ShenzhenShunchengdaTe- chnologyCo.,Ltd. SHUNDACHENGTECHNOLOGYCO.,LTD CompanyAddress:4thFloor,BuildingB5,XinfuIndustrialPark,ChongqingRoad,FuyongTown,BaoanDistrict, ShenzhenTel:0755-27211658Fax:0755- 29485750 ProductSpecification DocumentVersionCha- ngeHistoryVersionHist- oryTrackRecord Version Number ChangeRecordRejigger Fiction Prepared Approve DateDate V1.0 Initialissue CaiZhuang LuGuanyu 2015.12.16 V1.1 Changeproductsizetolerancevalue LuoChan- gwei LuGuanyu 2017.05.24 V1.2 Amendthecontentofthereliabilitytest descriptionsinsections8.1to8.4 PanFeng LuGuanyu 2017.11.07 V1.3 Thepackagingsizediagramillustrateshowthe productisplacedonthecarriertape. PanFeng LuGuanyu 2018.01.10 V1.4 CorrectthecontentofReliabilityProject9.4 Updatethediagramofthereflowsoldering temperaturecurve Correction11.3:Theproductstorageconditi- onsareMSL:1 PanFeng LuGuanyu 2018.06.08 V1.5 Bottomview:Addadashedlinemarkertothe bottomelectrodediagram PanFeng LuGuanyu 2019.06.18 V1.6 Instructionsforaddingagroundwiretothe solderpadsizediagram PanFeng LuGuanyu 2019.06.27 CompanyAddress:4thFloor,BuildingB5,XinfuIndustrialPark,ChongqingRoad,FuyongTown,BaoanDistrict, ShenzhenTel:0755-27211658Fax:0755- 29485750 Remarks： 1、Whenmodifyingaproduct'selectricalperformancespecifications,theversionnumbermustbe updated(e.g.,fromV1.0toV2.0,V3.0,etc.). 2、Whenchangingproducttestingmethods(includingreliabilitytestconditions)orusageconditions, updatetheversionnumberwithaseriessuffix(e.g.,V1.0toV1.1,V1.2,etc.). ShenzhenShunchengdaTechnologyCo., Ltd. SHUNDACHENGTECHNOLOGYCO.,LTD CompanyAddress:4F,BuildingB5,XinfuIndustrialPark,ChongqingRoad,FuyongTown,BaoanDistrict,Shenzhen Tel:0755-27211658Fax:0755-29485750 1.OverviewINTRODUCTION The"Jiali"microwavemultilayerceramicantennaLAseriesisdesignedforcompact SMDchipapplicationsinWLAN,WiFi,Bluetooth,PHS,mobilemulti-frequencyantennas, FMsystems,andotherapplications. "GLEAD"MicrowaveMulti-LayerCeramicAntennaLAseriesaredesignedtobeused inWLAN、WiFi、Bluetooth、PHS、Multiple-bandMobilephoneantenna,FM,etcand compactsizeSMDchipdesign. 2.ModelPartNumber LA31H2450/5500-A33 ProductName,NumberA33/ProductName:A33 AntennaFrequency:2450MHz/5500MHz;Product DesignStructure:H-type/ViaDesignSeries ProductSize:3.2×1.6×1.2 Multi-layerantenna 3.ExternaldimensionsandtestboardpaddimensionsDimensions(Unit:mm) Symbol LWT abc Dimensions3.2±0.21.6±0.21.2±0.10.5±0.10.7±0.11.0±0.1 ShenzhenShunchengdaTechnologyCo.,Ltd. SHUNDACHENGTECHNOLOGYCO.,LTD CompanyAddress:4F,BuildingB5,XinfuIndustrialPark,ChongqingRoad,FuyongTown,BaoanDistrict,ShenzhenTel: 0755-27211658Fax:0755-29485750 Thewidthofthegroundwiremayvaryinactualuse 4.TestCircuitandMatchingCircuitEvaluationBoardandMatchingCircuits 0.8pF ShenzhenShunchengdaTechnologyCo.,Ltd. SHUNDACHENGTECHNOLOGYCO.,LTD CompanyAddress:4F,BuildingB5,XinfuIndustrialPark,ChongqingRoad,FuyongTown,BaoanDistrict,ShenzhenTel: 0755-27211658Fax:0755-29485750 5.ElectricalPerformanceElectricalCharacteristics No. Item(Project)Specifications(Characteristics) 5.1 FrequencyRange 2400~2500MHz/5150~5850MHz (Withmatchingcircuittest)AfterMatching 2450MHz/5500MHz 5.2 BandWidth:Passbandwidth 100MHz(typ.)/800MHz(typ.)…

Text truncated - open the document above for the full version.