2BWRR-VS6621S40Wi-Fi 6 & Bluetooth Combo Module

00012160_X9_Ed.3 1/1 SHENZHEN YUNSU INTERNET TECHNOLOGY CO.,LTD. Modular Transmitter Approval Request Federal Communications Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 Company name: SHENZHEN YUNSU INTERNET TECHNOLOGY CO.,LTD. FCC ID: 2BWRR-VS6621S40 Gentlemen, In accordance with 47CFR 15.212 Modular Transmitters and KDB 996369 D01 ‘Module Certification Guide v04r02’. FCC ID: 2BWRR-VS6621S40 has been examined against the following requirements. Items to be covered by Single modular transmitters. Requirement per 15.212 and KDB 996369 D01 ‘Modular Certification Guide v04r02 Y/N Comments/ Explanation from Grantee (Explain why product complies/how it is achieved) 1. The radio elements must have the radio frequency circuitry shielded. Physical components and tuning capacitor(s) may be located external to the shield, but must be on the module assembly Y Has RF shielding. 2. The module must have buffered modulation/data inputs to ensure that the device will comply with Part 15 requirements with any type of input signal Y The modular have buffered modulation/data inputs. 3. The module must contain power supply regulation on the module Y The modular transmitter have its own power supply regulation. 4. The module must contain a permanently attached antenna, or contain a unique antenna connector, and be marketed and operated only with specific antenna(s), per Sections 15.203, 15.204(b), 15.204(c), 15.212(a), 2.929(b) Y The antenna adopts trace antenna design with special interface. 5. The module must demonstrate compliance in a stand-alone configuration Y The module was tested in a stand- alone configuration, please refer to the Setup Photo for the detail 6. The module must be labelled with its permanently affixed FCC ID label, or use an electronic display (See KDB Publication 784748 about labelling requirements) Y Please refer to label sample exhibit - host labelling is described in integration manual 7. The module must comply with all specific rules applicable to the transmitter including all the conditions provided in the integration instructions by the grantee Y The required FCC rule has been fulfilled and all the instructions for the maintaining compliance have been clearly stated in the User Manual. 8. The module must comply with RF exposure requirements Y The MPE evaluation with 20cm distance restriction is submitted for the compliance of RF Exposure requirement. 00012160_X9_Ed.3 1/1 Items to be covered by Split modular transmitters. Requirement per 15.212 and KDB 996369 D01 ‘Modular Certification Guide v04 Y/N Comments/ Explanation from Grantee (Explain why product complies/how it is achieved) 9. Split modular transmitters must meet all the requirements of a single modular in above item1 and 5 for single modular approval requirements. N Not applicable 10. Only the radio front end must be shielded. The physical crystal and tuning capacitors may be located external to the shielded radio elements. The interface between the split sections of the modular system must be digital with a minimum signaling amplitude of 150 mV peak- to-peak. N Not applicable 11. Control information and other data may be exchanged between the transmitter control elements and radio front end. N Not applicable 12. The sections of a split modular transmitter must be tested installed in a host device(s) similar to that which is representative of the platform(s) intended for use. N Not applicable 13. Manufacturers must ensure that only transmitter control elements and radio front end components that have been approved together are capable of operating together. The transmitter module must not operate unless it has verified that the installed transmitter control elements and radio front end have been authorized together. Manufacturers may use means including, but not limited to, coding in hardware and electronic signatures in software to meet these requirements, and must describe the methods in their application for equipment authorization. N Not applicable A limited modular approval (LMA) may be granted for single or split modular transmitters that comply partially with requirements above. Name: taohua deng Date: 2026-07-01 Title: purchaser Signature of applicant

Attestation Statement. Old Code: C5266091 24 New Code: 00015544 Ed.3 Change reason: FRN is added to the Applicant information section. 1/1 SHENZHEN YUNSU INTERNET TECHNOLOGY CO.,LTD. TO: Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 The Commission adopted rules that prohibit equipment authorization for “covered” telecommunications equipment and video surveillance equipment produced by entities identified on the Commission’s Covered List 1 , which is periodically updated. See the Covered List for more details. This Attestation Statement is to confirm that we follow the Section 2.911(d)(5)(i)-(ii) Applicant Company name: SHENZHEN YUNSU INTERNET TECHNOLOGY CO.,LTD. Grantee code: 2BWRR FCC ID: 2BWRR-VS6621S40 FRN: 0038581542 Contact Name: taohua deng Address: Room 502, Block A, Building 1, Shen International Vanke Hefeng Xuan, No.2 Minzhi Avenue, Minxin Community, Minzhi Subdistrict, Longhua District, Shenzhen City, China Telephone No: 13713569154 Fax No: N/A Email: [email protected] i. [SHENZHEN YUNSU INTERNET TECHNOLOGY CO.,LTD.] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. The applicant must sign this certification. ii. [SHENZHEN YUNSU INTERNET TECHNOLOGY CO.,LTD.] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant [is not] (as a specifically named entity or any of its subsidiaries or affiliates) identified on the Covered List as an entity producing “covered” equipment. The applicant must sign this certification. [SHENZHEN YUNSU INTERNET TECHNOLOGY CO.,LTD.] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant [is not] identified on the Covered List as an entity producing “covered” equipment . Date: 2026/07/01 Applicant’s Name: taohua deng Title: purchaser Signature 1 The Commission’s Covered List is published by the Public Safety and Homeland Security Bureau and posted on the Commission’s website. This Covered List, which is periodically updated, identifies particular equipment, produced by particular entities, that constitutes “covered” equipment. https://www.fcc.gov/supplychain/coveredlist

SHENZHEN YUNSU INTERNET TECHNOLOGY CO.,LTD. Code 00018768 Ed. 1 Item 1. The device is able to install software/program installation? ☐ Yes, go to Item 2. ☒ No. In this case, the rest of the items do not apply. The device cannot support installation of Kaspersky cybersecurity or anti-virus software. Item 2. Technical Requirements for Kaspersky Cybersecurity Software: # General Requirements (For all Devices) Yes / No or N/A Comments 1 Internet connection for activation and updates (For all Operating Systems) N/A # General Requirements (For Windows Devices) Yes / No or N/A Comments 1 Storage: 1500 MB free space on the hard drive N/A Device Wi-Fi 6 & Bluetooth Combo Module Company name SHENZHEN YUNSU INTERNET TECHNOLOGY CO.,LTD. Grantee code 2BWRR FCC ID 2BWRR-VS6621S40 FRN 0038581542 Contact name taohua deng Address Room 502, Block A, Building 1, Shen International Vanke Hefeng Xuan, No.2 Minzhi Avenue, Minxin Community, Minzhi Subdistrict, Longhua District, Shenzhen City, China Telephone number 13713569154 E-mail [email protected] Chipset/module information SWT6621-SH Operating System (if applicable) N/A Storage Capacity (hard drive or other permanent memory storage, if applicable) N/A 2 2 Operating System: Microsoft Windows 8, 8.1, 10 & 11 Home / Pro / Enterprise Microsoft Windows 7 Starter / Home Basic & Premium / Professional / Ultimate SP1 or higher N/A 3 Processor: 1 GHz or higher (x86 or x64) N/A 4 Memory (RAM)1 GB (32-bit) or 2 GB (64-bit) N/A 5 Screen Resolution: Minimum resolution of 1024 x 768 N/A # General Requirements (For macOS devices) Yes / No or N/A Comments 1 Operating System macOS® 13 – 14 N/A 2 Memory (RAM)4 GB N/A 3 Storage: 3455 MB free space on the hard drive N/A # General Requirements (For Android Devices) Yes / No or N/A Comments 1 Storage: 150 MB free space N/A 2 Operating System: Android™ 10 – 14 N/A 3 Screen Resolution: Minimum resolution of 320 x 480 N/A # General Requirements (for iOS devices) Yes / No or N/A Comments 1 Storage: 150 MB free space N/A 2 Operating System: iOS® 17 N/A # General Requirements (For Linux system) Yes / No or N/A Comments 1 Hard drive: 1 GB of free space N/A 2 CPU: Intel Pentium 1 GHz or higher N/A 3 3 RAM: 1 GB N/A 4 Minimum software requirements: AlmaLinux OS 8 or later; AlterOS 7.5 or later; Astra Linux Common Edition 2.12 or later; CentOS 6.7 or later; Debian GNU/Linux 10.0 or later; EulerOS 2.0 or later; Oracle Linux 7.3 or later ; Red Hat Enterprise Linux 6.7 or later ; Rocky Linux 8.5 or later ; SUSE Linux Enterprise Server 12.5 or later; Ubuntu 12.04 or later ; Uncom OS Home / Business / Education / Enterprise 2.2 or later; ALT Linux Workstaton / Workstation K / Server / Education 8 or later; ROSA Linux Workstation / Server 12 or later ; RED OS 7.3 and later ; N/A After reviewed the technical requirements, is the device capable of supporting the installation of Kaspersky software? ☐ Yes, go to Item 3. ☒ No. In this case, the rest of the items do not apply. The device cannot support installation of Kaspersky software Item 3. Connectivity Capabilities: # Physical Interface Purpose Justification 1 1 The justification field is used to justify why the software cannot be received through that interface. Check the annex for more indications. 4 1 # Wireless Interface Purpose Justification 1 1 2 After the review of this items, the device: ☒ Cannot support installation of any cybersecurity or anti-virus software on the covered list. ☐ Potentially can operate with any cybersecurity or anti-virus software on the covered list – additional third- party proof is provided to demonstrate compliance with requirements as of 2.911(d)5(i),(ii) – “Proof of Compliance with Covered List Software Requirements” of this document applies Signature: Name: taohua deng Date: 2026/07/01

TCB CALL página 1 File FCC ID: 2BWRR-VS6621S40 Please upload an exhibit that explains how does the TCB verify the new agent information: 1- Is the address of the agent a valid physical US mailing address (not a US post office box, not a virtual mailbox, not P.O. Boxes, not a vacant lot, not a public building, etc.) ○ We have checked if the address exists in a real and potential building (Google maps) + official US register, after this verification and the evidence below we can guarantee the following: not a US post office box not a virtual mailbox not P.O. Boxes not a vacant lot not a public building(note) ► We checked the FCC FRN Search based on the information provided by the grantee. On the official register from : Search | coloradosos.gov TCB CALL página 2 TCB CALL página 3 TCB CALL página 4 TCB CALL página 5 ► CONCLUSION by TCB: The ASOP defined and provided by grantee is VALID and confirmed. Therefore the exhibit "C5266091_X23_Ed1_US_Agent_Letter" included in the file is ok. 2- Is the agent physically located at that valid US address such that the agent can be legally served at that address? Yes , check above 3- Has the listed agent clearly agreed in writing to serve as the agent for the grantee at that address? Yes, it is included in the exhibit "C5266091_X23_Ed1_US_Agent_Letter" >

C5266091_X10_Ed.2 1/1 SHENZHENYUNSUINTERNETTECHNOLOGYCO.,LTD. OfficeofEngineeringTechnology FederalCommunicationsCommission 7435OaklandMillsRoad Columbia,MD21046 Date:2026-07-01 Subject:RequestforConfidentiality FCCID:2BWRR-VS6621S40 ToWhomItMayConcern, PursuanttotheprovisionsofSections0.457and0.459ofCommission'srules (47CFR0.457,0.459),wearerequestingtheCommissiontowithholdthefollowing attachment(s)asconfidentialdocumentfrompublicdisclosure. ExhibitsLong-Term Confidentiality Short-TermConfidentiality NOTE2 IDLabel/LocationNoNo AttestationStatementNoNo ExternalPhotosNo ☒ BlockDiagram ☒☐ Schematics ☒☐ TestReportNoNo TestSetupPhotosNo ☒ User’sManual ☐ NOTE 1 ☒ InternalPhotos ☐ NOTE 1 ☒ PartsList/TuneUp ☐☐ RFExposureInfoNoNo OperationalDescription ☒☐ CoverLetter(s)NoNo SDRSoftware/SecurityInfo ☒ No NOTE1:Long-TermConfidentialitymaybepermittedunderspecialconditions(SeeII.LONG-TERMCONFIDENTIALITY,Section3of KDB726920,uselastinforce) NOTE2:Short-TermConfidentialitycanberequestedforamaximumof180daysfromthedateofthegrant. Abovementioneddocumentcontainsdetailedsystemandequipmentdescriptionare consideredasproprietaryinformationinoperationoftheequipment.Thepublic disclosureofabovedocumentsmightbeharmfultoourcompanyandwouldgive competitoranunfairadvantageinthemarket. Incaseofshort-termConfidentiality,theapplicantrequeststheexhibitsselectedabove arewithheldfrompublicviewforaperiodof___180___daysfromthedateofthe GrantofEquipmentAuthorizationandpriortomarketing. Itisourunderstandingthatallmeasurementtestreports,FCCIDlabelformatand correspondentduringcertificationreviewprocesscannotbegrantedasconfidential documentsandthoseinformationwillbeavailableforpublicreviewoncethegrantof equipmentauthorizationisissued. C5266091_X10_Ed.2 1/1 Sincerely, Name:Taohuadeng Title:purchaser 2026/7/1

C5266091_X8_Ed.1 1/1 Letter of Authorization SHENZHEN YUNSU INTERNET TECHNOLOGY CO.,LTD. Company: SHENZHEN YUNSU INTERNET TECHNOLOGY CO.,LTD. Address: Room 502, Block A, Building 1, Shen International Vanke Hefeng Xuan, No.2 Minzhi Avenue, Minxin Community, Minzhi Subdistrict, Longhua District, Shenzhen City, China Product Name: Wi-Fi 6 & Bluetooth Combo Module Model Number: VS6621S40 FCC Identifier: 2BWRR-VS6621S40 We authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, to act on our behalf on all matters concerning the above named equipment. Any individual within LGAI Technological Center S.A. is authorized to act on our behalf and take action on the application. We declare that authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by LGAI Technological Center S.A. on our behalf shall have the same effect as acts of our own. Name: taohua deng Date: 2026.07.01 Title: purchaser Signature of applicant:

C5266091_X13_Ed.1 1/1 <SHENZHENYUNSUINTERNETTECHNOLOGYCO.,LTD.> FCCSoftwareConfigurationControlDeclaration Date:July1,2026 FederalCommunicationsCommission AuthorizationandEvaluationDivision 7435OaklandMillsRoad Columbia,MD21046 Attn:OETDept. Product:Wi-Fi6&BluetoothComboModule ModelNumber:VS6621S40 RegardingFCCCountryCodeSelectionguidelinesidentifiedinKDB594280. “Allapplicationsforequipmentauthorizationfortransmittersthatcanhaveradio parameters,orothertechnicalparameters,reportedtotheCommissionsetby softwaremusthaveanattestationindicatingthatnothirdpartywillhavesoftware, orconfigurationcontrol,toprogramthedeviceoutofcomplianceofthetechnical rulesunderwhichithasbeencertified.” Wedeclarethatnothirdpartywillhavesoftware,orconfigurationcontrol,to programthedeviceoutofcomplianceofthetechnicalrulesunderwhichithas beencertified. Signatureofapplicant Name:Taohuadeng Title:purchaser

LabelLocationOnEUT Confirmtheuseofrealappearancephotosasreferences Label:(Size:1cm*0.5cm) FCCID:2BWRR-VS6621S40

MAXIMUMPERMISSIBLEEXPOSURE KDB447498D01MobileandPortableDevicesRFExposureProceduresand EquipmentAuthorizationPoliciesv06. 2.1091Radiofrequencyradiationexposureevaluation:mobiledevices. AccordingtoFCC1.1310:Thecriterialistedinthefollowingtableshallbeused toevaluatetheenvironmentimpactofhumanexposuretoradiofrequency(RF) Radiationasspecifiedin§1.1307(b) EUTSpecification FCCID2BWRR-VS6621S40 EUTWi-Fi6&BluetoothComboModule Frequencyband(Operating)BT:2.402GHz~2.480GHz WLAN:2.412GHz~2.462GHz RLAN:5.180GHz~5.240GHz RLAN:5.260GHz~5.320GHz RLAN: 5.500 GHz~ 5.700 GHz RLAN:5.745GHz~5.825GHz Others: DevicecategoryPortable(<20cmseparation) Mobile(>20cmseparation) Others___ ExposureclassificationOccupational/Controlledexposure GeneralPopulation/Uncontrolledexposure AntennadiversitySingleantenna Multipleantennas Txdiversity Rxdiversity Tx/Rxdiversity Antennagain(Max)BT/WiFi2.4G:1.88dBi WiFi5.2G：1.87dBi WiFi5.3G：1.82dBi WiFi5.6G：1.84dBi WiFi5.8G：1.76dBi EvaluationappliedMPEEvaluation SAREvaluation LimitsforMaximumPermissibleExposure(MPE) Frequency Range(MHz) ElectricField Strength(V/m) MagneticField Strength(A/m) Power Density(mW/cm 2 ) AverageTime (A)LimitsforOccupational/ControlExposures 300-1500----F/3006 1500-100000----56 (B)LimitsforGeneralPopulation/UncontrolExposures 300-1500----F/150030 1500-100000----130 Friistransmissionformula:Pd=(Pout*G)\(4*pi*R2) Where Pd=PowerdensityinmW/cm 2 Pout=outputpowertoantennainMw G=gainofantennainlinearscale Pi=3.1416 R=distancebetweenobservationpointandcenteroftheradiatorincm PdthelimitofMPE.Ifweknowthemaximumgainoftheantennaandtotalpowerinputto theantenna,throughthecalculation,wewillknowthedistancewheretheMPElimitis reached. MeasurementResult OperatingMode Maximum output power (dBm) Tuneup tolerance (dBm) Max.Tuneup Power (dBm) Antenna Gain (dBi) Power densityat 20cm (mW/cm 2 ) Power density Limits (mW/cm 2 ) BDR+EDR3.243.24±14.241.880.00081 BLE7.527.52±18.521.880.00221 WiFi2.4G13.9913.99±114.991.880.00971 WiFi5.2G15.815.8±116.801.870.01471 WiFi5.3G14.5314.53±115.531.820.01081 WiFi5.6G16.7516.75±117.751.840.01811 WiFi5.8G14.3714.37±115.371.760.01031 Note:BT&WiFicannotsupportsimultaneoustransmission.

Page 1 of 78 FCC Test Report Report No.:1812C60314312504 Applicant: SHENZHEN YUNSU INTERNET TECHNOLOGY CO.,LTD. Address: Room 502, Block A, Building 1, Shen International Vanke Hefeng Xuan, No.2 Minzhi Avenue, Minxin Community, Minzhi Subdistrict, Longhua District, Shenzhen City, China Product Name:Wi-Fi 6 & Bluetooth Combo Module Report Date:2026-07-01 Shenzhen Anbotek Compliance Laboratory Limited #检测章# #资质章# #报告二维码# Report No.:1812C60314312504Page 2 of 78 FCC ID: 2BWRR-VS6621S40 Contents 1. General Information ...............................................................................................................................6 1.1. Client Information ........................................................................................................................6 1.2. Description of Device (EUT) ........................................................................................................6 1.3. Auxiliary Equipment Used During Test........................................................................................8 1.4. Operation channel list..................................................................................................................8 1.5. Description of Test Mode(s) ......................................................................................................10 1.6. Measurement Uncertainty .........................................................................................................10 1.7. Additional Instructions ...............................................................................................................11 1.8. Test Summary ...........................................................................................................................13 1.9. Description of Test Facility ........................................................................................................14 1.10. Disclaimer................................................................................................................................14 1.11. Test Equipment List.................................................................................................................15 2. Conducted Emission at AC power line ................................................................................................17 2.1. EUT Operation ..........................................................................................................................17 2.2. Test Setup .................................................................................................................................17 2.3. Test Data ...................................................................................................................................18 3. Duty Cycle ...........................................................................................................................................26 3.1. EUT Operation ..........................................................................................................................26 3.2. Test Setup .................................................................................................................................26 3.3. Test Data ...................................................................................................................................26 4. Emission bandwidth and occupied bandwidth .....................................................................................27 4.1. EUT Operation ..........................................................................................................................28 4.2. Test Setup .................................................................................................................................29 4.3. Test Data ...................................................................................................................................29 5. Maximum conducted output power......................................................................................................30 5.1. EUT Operation ..........................................................................................................................30 5.2. Test Setup .................................................................................................................................31 5.3. Test Data ...................................................................................................................................31 6. Power spectral density ........................................................................................................................32 6.1. EUT Operation ..........................................................................................................................32 6.2. Test Setup .................................................................................................................................33 6.3. Test Data ...................................................................................................................................33 7. Frequency stability...............................................................................................................................34 7.1. EUT Operation ..........................................................................................................................34 7.2. Test Setup .................................................................................................................................35 7.3. Test Data ...................................................................................................................................35 8. Channel Move Time, Channel Closing Transmission Time.................................................................36 8.1. EUT Operation ..........................................................................................................................37 8.2. Test Setup .......…

Text truncated - open the document above for the full version.

ConfirmationofSample TheMainAntennaSampleConfirmation Manufacturer:SHENZHEN YUNSU INTERNET TECHNOLOGY CO.,LTD. Address:3rd Floor, Building D, Tongfang Kexing Science Park, No.11 Langshan Road, North Hi-Tech Park, Nanshan District, Shenzhen City Customer Project Name X9- Dual-band WIFI antenna 2025-12-16 Date S1566-0 Project NO. 1 Note PCB+ coaxial line s 2.4G&5.8 Frequency Range G RFEnginee Designed By r StructuralEngineer EngineeringManage Checked By r Client’s Approval SHENZHEN YUNSU INTERNET TECHNOLOGY CO.,LTD. ConfirmationofSample 第 2 页 / 共计 8 页 CCover ...................................................................1 catalogue ................................................................2 1. Overview of the specification sheet 32. Electrical performance ..........3 2.1. Antenna frequency band ...............................................3 2.2. Matching circuit .....................................................3 2.3. Standing wave diagram of antenna SWR+SMITH............................3 2.4. Antenna efficiency ...................................................3 2.5. Directional diagram............................................. 4, 5, 6 3. Structural drawings catalogue ...................................................7 ConfirmationofSample 1.Specification description This specification describes the status of the SNF-WIFI-001 internal antenna with a frequency band of 2400MHz-2500MHz 5150MHz-5850MHz 2. Antenna appearance 3.1. Antenna frequency b 3. Electrical performance and antennae 2.4G 2400~2500MHz 5150-5850MH working frequency z The original motherboard matching has not been changed 3.3An t e n n a st a ndi n g wave di a g r a m 3.2.match circuit Log mag+SMith ConfirmationofSample 3.4 antenna effeciency FreqEffiGainFreqEffiGain (MHz)(%)(dBi)(MHz)(%)(dBi) 240052.741.7514054.461.84 241053.611.78520055.571.87 242053.841.84524054.411.82 243053.991.88530054.011.79 244052.361.67534053.791.76 245052.161.65540054.031.8 246051.121.61544055.451.84 247052.981.73550054.411.81 248052.271.68554053.141.73 249052.971.74560053.821.77 250051.741.63564053.311.75 570052.241.7 574052.31.71 580052.711.72 584053.511.76 3.5directional diagram 2400MHz ConfirmationofSample 2450MHz 2500MHz ConfirmationofSample 5140MHz 5500MHz 5500MHz ConfirmationofSample 5840MHz ConfirmationofSample 4.structural drawings

ReportNo.:1812C60314312504-01 Page 1 of 244 AppendixTestData ReportNo.:1812C60314312504-01TestSampleNo.:1-2-2 StartTestDate:2026-6-8FinishTestDate:2026-6-12 TestEngineer:Auditor: Temperature:22.5 °C RelativeHumidity:66% Pressure:101kPa AppendixA1:26dBBandwidth TestResult TestModeAntennaFrequency[MHz] 26db EBW [MHz] FL[MHz]FH[MHz]Limit[MHz]Verdict 11AAnt1518020.1205170.1205190.240------ 11AAnt1522019.8405210.1205229.960------ 11AAnt1524019.9605229.9605249.920------ 11AAnt1526019.9605250.0405270.000------ 11AAnt1530019.9605290.0405310.000------ 11AAnt1532019.6805310.1205329.800------ 11AAnt1550020.0005490.0405510.040------ 11AAnt1558019.8405570.0005589.840------ 11AAnt1570020.1205690.0005710.120------ 11AAnt1574519.8805734.9605754.840------ 11AAnt1578519.9205774.9205794.840------ 11AAnt1582519.9605814.9605834.920------ 11N20SISOAnt1518019.8805170.0005189.880------ 11N20SISOAnt1522020.2805209.7205230.000------ 11N20SISOAnt1524020.0805229.9605250.040------ 11N20SISOAnt1526020.1605249.9205270.080------ 11N20SISOAnt1530020.1205289.8805310.000------ 11N20SISOAnt1532020.2005309.9205330.120------ 11N20SISOAnt1550020.1205489.9205510.040------ 11N20SISOAnt1558020.2405569.8405590.080------ 11N20SISOAnt1570020.0405689.9605710.000------ 11N20SISOAnt1574520.0805734.8405754.920------ 11N20SISOAnt1578520.3205774.7205795.040------ ReportNo.:1812C60314312504-01 Page 2 of 244 11N20SISOAnt1582520.0805814.9205835.000------ 11N40SISOAnt1519039.6805170.3205210.000------ 11N40SISOAnt1523039.5205210.4005249.920------ 11N40SISOAnt1527039.6805250.2405289.920------ 11N40SISOAnt1531039.6805290.1605329.840------ 11N40SISOAnt1551039.6005490.2405529.840------ 11N40SISOAnt1555039.6005530.2405569.840------ 11N40SISOAnt1567039.6005650.1605689.760------ 11N40SISOAnt1575539.7605735.0005774.760------ 11N40SISOAnt1579539.8405775.0005814.840------ 11AC20SISOAnt1518021.8405169.0405190.880------ 11AC20SISOAnt1522021.9605208.9605230.920------ 11AC20SISOAnt1524021.8805228.9205250.800------ 11AC20SISOAnt1526022.0405248.9205270.960------ 11AC20SISOAnt1530021.8405289.0405310.880------ 11AC20SISOAnt1532021.9605308.9205330.880------ 11AC20SISOAnt1550021.9205489.0405510.960------ 11AC20SISOAnt1558022.0005568.9605590.960------ 11AC20SISOAnt1570021.8805689.0405710.920------ 11AC20SISOAnt1574522.1205733.7605755.880------ 11AC20SISOAnt1578521.8405773.9605795.800------ 11AC20SISOAnt1582522.2005813.8405836.040------ 11AC40SISOAnt1519039.8405170.0805209.920------ 11AC40SISOAnt1523039.4405210.4805249.920------ 11AC40SISOAnt1527039.4405250.3205289.760------ 11AC40SISOAnt1531039.5205290.2405329.760------ 11AC40SISOAnt1551039.5205490.3205529.840------ 11AC40SISOAnt1555039.6005530.2405569.840------ 11AC40SISOAnt1567039.6005650.1605689.760------ 11AC40SISOAnt1575539.5205735.2405774.760------ 11AC40SISOAnt1579539.6005775.2405814.840------ 11AX20SISOAnt1518020.6405169.6805190.320------ 11AX20SISOAnt1522020.6405209.6805230.320------ 11AX20SISOAnt1524020.5605229.7205250.280------ 11AX20SISOAnt1526020.5205249.8005270.320------ 11AX20SISOAnt1530020.4805289.6805310.160------ 11AX20SISOAnt1532020.7205309.6405330.360------ 11AX20SISOAnt1550020.6405489.7205510.360------ 11AX20SISOAnt1558020.6005569.8005590.400------ 11AX20SISOAnt1570020.6005689.7205710.320------ 11AX20SISOAnt1574520.4005734.7605755.160------ 11AX20SISOAnt1578520.5605774.7205795.280------ ReportNo.:1812C60314312504-01 Page 3 of 244 11AX20SISOAnt1582520.5205814.8005835.320------ 11AX40SISOAnt1519040.4805169.9205210.400------ 11AX40SISOAnt1523040.0005210.0805250.080------ 11AX40SISOAnt1527040.0005250.0005290.000------ 11AX40SISOAnt1531039.9205290.0805330.000------ 11AX40SISOAnt1551040.0805490.0005530.080------ 11AX40SISOAnt1555039.9205530.0005569.920------ 11AX40SISOAnt1567040.0005650.0005690.000------ 11AX40SISOAnt1575540.1605734.8405775.000------ …

Text truncated - open the document above for the full version.