2BWWJ-TK-E180Computer

factory This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC warning: Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

U.S.AgentDesignationforServiceofProcess (ApplicantandU.S.AgentareSeparateParties) TO:FederalCommunicationsCommission 7435OaklandMillsRoad Columbia,MD21046 ATTENTION:FCCCertification–Section2.911(d)(7)Information DesignatedU.S.Agent CompanyName:AlpacaTecInc Address:1337MassachusettsAveSUITE315,ARLINGTON,MA02476US FRN:0038616249 ContactName:YimengWang Tel.:5515019720 Email:[email protected] Thisletteristoconfirmthatwe(“theDesignatedU.S.Agent)haveacceptedtheresponsibilitytoactasthe DesignatedU.S.AgentforServiceofProcessasrequiredbysection47CFR2.911(d)(7)onbehalfofthe Applicantnotedbelow. U.S.AgentSignature: Date:2026/07/30 Signedby(PrintedName/Title):YimengWang/Manager TheApplicantacknowledgesthattheymustmaintainanagentfornolessthanoneyearafterterminatingall marketingandimportationORtheconclusionofanyCommission-relatedproceedinginvolvingthe equipment.TheapplicantfurtheracknowledgestheirresponsibilitytoinformtheFCCwheneverthe DesignatedU.S.Agentinformationabovechanges. Applicant Companyname:AlpacaTecInc GranteeCode:2BWWJ FCCID:2BWWJ-TK-E180 ContactName:YimengWang StreetAddress:1337MassachusettsAveSUITE315,ARLINGTON,MA02476US TelephoneNo:5515019720 Email:[email protected] FRN:0038616249 ApplicantSignature: Date:2026/07/30 Signedby(PrintedName/Title):YimengWang/Manager

AlpacaTecInc 2026/07/30 EurofinsElectricalandElectronicTestingNA,Inc. 914WestPatapscoAvenue Baltimore,MD21230 RE:AttestationStatementsPart2.911(d)(5)(i)requestfor2BWWJ-TK-E180 [ AlpacaTecInc ](“theapplicant”)certifiesthattheequipmentforwhichauthorization issoughtisnot“covered”equipmentprohibitedfromreceivinganequipment authorizationpursuanttosection2.903oftheFCCrules. Wealsocertifythat,asofthedateofthefilingoftheapplication,theequipmentdoes notutilizecyber-securityoranti-virussoftwarefromKasperskyLab,Inc,oranyofits successorsandassignees,whichisalsoonthe“coveredlist”. Sincerely, Name:YimengWang/Manager AlpacaTecInc 2026/07/30 EurofinsElectricalandElectronicTestingNA,Inc. 914WestPatapscoAvenue Baltimore,MD21230 RE:AttestationStatementsPart2.911(d)(5)(ii)requestfor2BWWJ-TK-E180 [ AlpacaTecInc ](“theapplicant”)certifiesthat,asofthedateofthefilingofthe application,theapplicantisnotidentifiedontheCoveredListasanentityproducing “covered”equipment. Sincerely, Name:YimengWang/Manager

Declaration on model difference We the undersigned hereby confirm that any of our production units bearing the following model numbers are identical in circuitry and electrical, mechanical and physical construction; The difference lies in the model name and color. Production name Trade name Model no. Computer N/A TK-E180,AL11,AL14, AL15,AL16,AL17,AL18,AL21,AL11A,AL14A,AL15 A,AL16A, AL17A,AL18A,AL21A,TK-E140i,TK- E156,TK-E160,TK-E150U,TK-E140U Confirmed by: Alpaca Tec Inc Signature: Date: 2026/07/31 Name: Yimeng Wang Title: Manager Company: Alpaca Tec Inc

AlpacaTecInc 2026/07/30 EurofinsElectricalandElectronicTestingNA,Inc. 914W.PatapscoAvenue Baltimore,MD21230 USA RE:CONFIDENTIALITYREQUESTFOR ProductName:Computer FCCID:2BWWJ-TK-E180 Model(s):TK-E180,AL11,AL14,AL15,AL16,AL17,AL18,AL21,AL11A,AL14A, AL15A,AL16A,AL17A,AL18A,AL21A,TK-E140i,TK-E156,TK-E160,TK-E150U, TK-E140U ToWhomItMayConcern: Thisletterservesasanofficialrequestforconfidentialityundersections0.457and0.459 ofCFR47.Wehaverequestedthatthe -BlockDiagram -Schematics -OperationalDescription -FCCNIISoftwareSecurityInfo requiredtobesubmittedwiththisapplicationbepermanentlywithheldfrompublic review. Theabovematerialscontaintradesecretsandproprietaryinformationnotcustomarily releasedtothepublic.Thepublicdisclosureofthesematerialsmaybeharmfultothe applicantandprovideunjustifiedbenefitstoitscompetitors. Pleasecontactmeifthereisanyinformationyoumayneed. Sincerely, Client’ssignature: Client’sname/title:YimengWang/Manager Contactinformation/address:AlpacaTecInc/1337MassachusettsAveSUITE315, ARLINGTON,MA02476US

Alpaca Tec Inc 2026/07/30 Eurofins Electrical and Electronic Testing NA, Inc. 914 W. Patapsco Avenue Baltimore, MD 21230 USA RE: LETTER OF AGENT AUTHORIZATION Product Name: Computer FCC ID: 2BWWJ-TK-E180 Model(s): TK-E180,AL11,AL14, AL15,AL16,AL17,AL18,AL21,AL11A,AL14A, AL15A,AL16A, AL17A,AL18A,AL21A,TK-E140i,TK-E156,TK-E160,TK-E150U, TK-E140U To Whom It May Concern: We, the undersigned, hereby authorize Shenzhen BCTC Technology Co., Ltd. to act on our behalf in all matters relating to application for equipment authorization, including the signing of all documents relating to these matters. We also hereby certify that no party to the application authorized hereunder is subject to the denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C.853(a). This agreement expires one year from the current date. Sincerely, Client’s signature: Client’s name / title : Yimeng Wang/Manager Contact information / address: Alpaca Tec Inc/1337 Massachusetts Ave SUITE 315, ARLINGTON, MA 02476 US

External Photos

Size:50mm*30mm Labeling Process: Fragile paper substrate +Permanent strong adhesive +Laser-etched marking Model:TK-E180 FCC ID:2BWWJ-TK-E180 label position

Internal Photos WIFI ANT B BT/WIFI ANT A

FCC ID: 2BWWJ-TK-E180 Portable device According to § 15.247(i) and § 1.1307(b)(1), systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy level in excess of the Commission’s guidelines. According to KDB447498 D01 General RF Exposure Guidance V06 The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] * [√f(GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR, where f(GHz) is the RF channel transmit frequency in GHz； Power and distance are rounded to the nearest mW and mm before calculation； The result is rounded to one decimal place for comparison； The test exclusions are applicable only when the minimum test separation distance is ≤ 50 mm and for transmission frequencies between 100 MHz and 6 GHz. When the minimum test separation distance is < 5 mm, a distance of 5 mm is applied to determine SAR test exclusion. We use 5mm as separation distance to calculate. Maximum measured transmitter power: Mode Channel Freq. (MHz) Max Transmit Power (dBm) Max tune-up power (dBm) Result calculation 1-g SAR BT 2402 4.26 5.0 0.98 3.0 WIFI 5G 5190 5.03 6.0 1.81 3.0 Conclusion: BT and WIFI 5G can transmit simultaneously, For the max result : 0.98+1.81=2.79≤ 3.0 for 1-g SAR extremity SAR, No SAR is required.

No.：BCTC/KJ-RF-ICT-001 Page 1 of 54 Edition：B.1 TEST REPORT Shenzhen BCTC Technology Co., Ltd. Report No.: BCTC2606051300-1E Applicant: Alpaca Tec Inc Product Name: Computer Test Model: TK-E180 Tested Date: 2026-06-26 to 2026-08-07 Issued Date: 2026-08-07 Report No.: BCTC2606051300-1E No.：BCTC/KJ-RF-ICT-001 Page 2 of 54 Edition：B.1 FCC ID:2BWWJ-TK-E180 The test report is effective only with both signature and specialized stamp.This result(s) shown in this report refer only to the sample(s) tested. Without written approval of Shenzhen BCTC Technology Co., Ltd, this report can’t be reproduced except in full.The tested sample(s) and the sample information are provided by the client. Product Name: Computer Trademark: ALPACATEC Model/Type Ref.: TK-E180,AL11,AL14, AL15,AL16,AL17,AL18,AL21,AL11A,AL14A,AL15A,AL16A, AL17A,AL18A,AL21A,TK-E140i,TK-E156,TK-E160,TK-E150U,TK-E140U Prepared For: Alpaca Tec Inc Address: 1337 Massachusetts Ave SUITE 315, ARLINGTON, MA 02476 US Manufacturer: Shenzhen Great Asia Electronic Co.,Ltd. Address: 3rd Floor, Building 5, Gonglian Fuji Innovation Park, No. 58 Ping'an Road,Dafu Community, Guanlan, Longhua District, Shenzhen Prepared By: Shenzhen BCTC Technology Co., Ltd. Address: Room 101M, Unit 1, Building1, Pengyuan, No.18, Lilang Road, Shanglilang, Nanwan Subdistrict, Longgang District, Shenzhen, Guangdong, China. Sample Received Date: 2026-06-26 Sample tested Date: 2026-06-26 to 2026-08-07 Report No.: BCTC2606051300-1E Test Standards: 47 CFR Part 15 Subpart C （clause 15.247） ANSI C63.10-2020 Test Results: PASS Remark: This is Bluetooth BLE radio test report. Prepared by : Reviewer by : Approved by: Mike Zheng Louis Zeng Sewen Guo Report No.: BCTC2606051300-1E No.：BCTC/KJ-RF-ICT-001 Page 3 of 54 Edition：B.1 Table of Content Test Report Declaration Page 1. Version .................................................................................................................. 5 2. Test Summary ....................................................................................................... 6 3. Measurement Uncertainty ..................................................................................... 7 4. Product Information And Test Setup ..................................................................... 8 4.1 Product Information ............................................................................................... 8 4.2 Test Setup Configuration ...................................................................................... 9 4.3 Support Equipment ............................................................................................... 9 4.4 Channel List ........................................................................................................ 10 4.5 Test Mode ........................................................................................................... 10 4.6 Table Of Parameters Of Text Software Setting ................................................... 10 5. Test Facility And Test Instrument Used ............................................................... 11 5.1 Test Facility ......................................................................................................... 11 5.2 Test Instrument Used .......................................................................................... 11 6. Conducted Emissions .......................................................................................... 14 6.1 Block Diagram Of Test Setup .............................................................................. 14 6.2 Limit .................................................................................................................... 14 6.3 Test procedure .................................................................................................... 14 6.4 EUT Operating Conditions .................................................................................. 14 6.5 Test Result ............................................................................................................ 15 7. Radiated Emissions ............................................................................................. 17 7.1 Block Diagram Of Test Setup .............................................................................. 17 7.2 Limit .................................................................................................................... 18 7.3 Test procedure .................................................................................................... 19 7.4 EUT operating Conditions ................................................................................... 20 7.5 Test Result .......................................................................................................... 21 8. Radiated Band Emission Measurement and Restricted Bands Of Operation ...... 25 8.1 Block Diagram Of Test Setup .............................................................................. 25 8.2 Limit .................................................................................................................... 25 8.3 Test Procedure ................................................................................................... 26 8.4 EUT Operating Conditions .................................................................................. 26 8.5 Test Result .......................................................................................................... 27 9. Power Spectral Density Test ............................................................................... 28 9.1 Block Diagram Of Test Setup .............................................................................. 28 9.2 Limit .................................................................................................................... 28 9.3 Test procedure .................................................................................................... 28 9.4 EUT Operating Condi…

Text truncated - open the document above for the full version.

No.：BCTC/KJ-RF-ICT-001 Page 1 of 145 Edition：B.1 TEST REPORT Shenzhen BCTC Technology Co., Ltd. Report No.: BCTC2606051300-3E Applicant: Alpaca Tec Inc Product Name: Computer Test Model: TK-E180 Tested Date: 2026-06-26 to 2026-08-07 Issued Date: 2026-08-07 Report No.: BCTC2606051300-3E No.：BCTC/KJ-RF-ICT-001 Page 2 of 145 Edition：B.1 FCC ID: 2BWWJ-TK-E180 The test report is effective only with both signature and specialized stamp.This result(s) shown in this report refer only to the sample(s) tested. Without written approval of Shenzhen BCTC Technology Co., Ltd, this report can’t be reproduced except in full.The tested sample(s) and the sample information are provided by the client. Product Name: Computer Trademark: ALPACATEC Model/Type Reference: TK-E180,AL11,AL14, AL15,AL16,AL17,AL18,AL21,AL11A,AL14A,AL15A,AL16A, AL17A,AL18A,AL21A,TK-E140i,TK-E156,TK-E160,TK-E150U,TK-E140U Prepared For: Alpaca Tec Inc Address: 1337 Massachusetts Ave SUITE 315, ARLINGTON, MA 02476 US Manufacturer: Shenzhen Great Asia Electronic Co.,Ltd. Address: 3rd Floor, Building 5, Gonglian Fuji Innovation Park, No. 58 Ping'an Road,Dafu Community, Guanlan, Longhua District, Shenzhen Prepared By: Shenzhen BCTC Technology Co., Ltd. Address: Room 101M, Unit 1, Building1, Pengyuan, No.18, Lilang Road, Shanglilang, Nanwan Subdistrict, Longgang District, Shenzhen, Guangdong, China. Sample Received Date: 2026-06-26 Sample Tested Date: 2026-06-26 to 2026-08-07 Report No.: BCTC2606051300-3E Test Standards: 47 CFR Part 15 Subpart C (clause 15.247) ANSI C63.10-2020 Test Results: PASS Remark: This is WIFI-2.4GHz band radio test report. Prepared by : Reviewer by : Approved by: Mike Zheng Louis Zeng Sewen Guo Report No.: BCTC2606051300-3E No.：BCTC/KJ-RF-ICT-001 Page 3 of 145 Edition：B.1 Table of Content Test Report Declaration Page 1. Version .................................................................................................................. 5 2. Test Summary ....................................................................................................... 6 3. Measurement Uncertainty ..................................................................................... 7 4. Product Information and Test Setup ...................................................................... 8 4.2 Test Setup Configuration ...................................................................................... 9 4.3 Support Equipment ............................................................................................... 9 4.4 Channel List ........................................................................................................ 10 4.5 Test Mode ........................................................................................................... 10 4.6 Table Of Parameters Of Text Software Setting ................................................... 11 4.7 Antenna ............................................................................................................... 11 5. Test Facility And Test Instrument Used ............................................................... 13 5.1 Test Facility ......................................................................................................... 13 5.2 Test Instrument Used .......................................................................................... 13 6. Conducted Emissions .......................................................................................... 16 6.1 Block Diagram Of Test Setup .............................................................................. 16 6.2 Limit .................................................................................................................... 16 6.3 Test procedure .................................................................................................... 16 6.4 EUT operating Conditions ................................................................................... 16 6.5 Test Result .......................................................................................................... 17 7. Radiated Emissions ............................................................................................. 19 7.1 Block Diagram Of Test Setup .............................................................................. 19 7.2 Limit .................................................................................................................... 20 7.3 Test procedure .................................................................................................... 21 7.4 EUT Operating Conditions .................................................................................. 22 7.5 Test Result .......................................................................................................... 22 8. Radiated Band Emission Measurement and Restricted Bands Of Operation ...... 31 8.1 Block Diagram Of Test Setup .............................................................................. 31 8.2 Limit .................................................................................................................... 31 8.3 Test procedure .................................................................................................... 32 8.4 EUT Operating Conditions .................................................................................. 32 8.5 Test Result .......................................................................................................... 33 9. Power Spectral Density Test ............................................................................... 36 9.1 Block Diagram Of Test Setup .............................................................................. 36 9.2 Limit .................................................................................................................... 36 9.3 Test procedure .................................................................................................... 36 9.4 EU…

Text truncated - open the document above for the full version.

Report No.: BCTC2606051300-3E No.：BCTC/KJ-RF-ICT-001 Page 73 of 145 Edition：B.1 -6dB Bandwidth NVNT n40 2437MHz Ant B -6dB Bandwidth NVNT n40 2452MHz Ant B Report No.: BCTC2606051300-3E No.：BCTC/KJ-RF-ICT-001 Page 74 of 145 Edition：B.1 -6dB Bandwidth NVNT ax20 2412MHz Ant B -6dB Bandwidth NVNT ax20 2437MHz Ant B Report No.: BCTC2606051300-3E No.：BCTC/KJ-RF-ICT-001 Page 75 of 145 Edition：B.1 -6dB Bandwidth NVNT ax20 2462MHz Ant B -6dB Bandwidth NVNT ax40 2422MHz Ant B Report No.: BCTC2606051300-3E No.：BCTC/KJ-RF-ICT-001 Page 76 of 145 Edition：B.1 -6dB Bandwidth NVNT ax40 2437MHz Ant B -6dB Bandwidth NVNT ax40 2452MHz Ant B Report No.: BCTC2606051300-3E No.：BCTC/KJ-RF-ICT-001 Page 77 of 145 Edition：B.1 11. Peak Output Power Test 11.1 Block Diagram Of Test Setup 11.2 Limit FCC Part15 (15.247) , Subpart C Section Test Item Limit Frequency Range (MHz) Result 15.247(b)(3) Peak Output Power 1 watt or 30dBm 2400-2483.5 PASS 11.3 Test Procedure a. The EUT was directly connected to the Power meter 11.4 EUT Operating Conditions The EUT tested system was configured as the statements of 4.6 Unless otherwise a special operating condition is specified in the follows during the testing. Note: Power Spectral Density(dBm)=Reading+Cable Loss Report No.: BCTC2606051300-3E No.：BCTC/KJ-RF-ICT-001 Page 78 of 145 Edition：B.1 11.5 Test Result Temperature: 23.6°C Relative Humidity: 50% Pressure: 101KPa Test Voltage: DC 11.4V Test Mode Frequency(MHz) Ant A Maximum Conducted Output Power(PK) (dBm) Ant B Maximum Conducted Output Power(PK) (dBm) Limit (dBm) 802.11b 2412 2.69 2.84 30 2437 2.65 2.67 30 2462 2.24 2.22 30 802.11g 2412 1.92 2.03 30 2437 2.07 1.74 30 2462 1.85 1.71 30 802.11n20 2412 1.46 1.99 30 2437 1.87 1.79 30 2462 1.83 1.58 30 802.11n40 2422 0.93 0.62 30 2437 1.35 1.05 30 2452 0.94 0.95 30 802.11ax20 2412 1.91 1.97 30 2437 1.84 1.42 30 2462 1.54 1.47 30 802.11ax40 2422 1.34 1.05 30 2437 1.51 1.37 30 2452 1.11 1.16 30 Report No.: BCTC2606051300-3E No.：BCTC/KJ-RF-ICT-001 Page 79 of 145 Edition：B.1 For 2T2R Test Mode Frequency(MHz) Maximum Conducted Output Power(PK) (dBm) Limit (dBm) Result 802.11n20 2412 4.74 30 PASS 2437 4.84 30 PASS 2462 4.72 30 PASS 802.11n40 2422 3.79 30 PASS 2437 4.21 30 PASS 2452 3.96 30 PASS 802.11ax20 2412 4.95 30 PASS 2437 4.65 30 PASS 2462 4.52 30 PASS 802.11ax40 2422 4.21 30 PASS 2437 4.45 30 PASS 2452 4.15 30 PASS Report No.: BCTC2606051300-3E No.：BCTC/KJ-RF-ICT-001 Page 80 of 145 Edition：B.1 12. 100 kHz Bandwidth Of Frequency Band Edge 12.1 Block Diagram Of Test Setup 12.2 Limit In any 100 kHz bandwidth outside the frequency band in which the spread spectrum intentional radiator is operating, the radio frequency power that is produced by the intentional radiator shall be at least 20 dB below that in the 100 kHz bandwidth within the band that contains the highest level of the desired power, based on either an RF conducted or a radiated measurement. 12.3 Test Procedure Using the following spectrum analyzer setting: a) Set the RBW = 100KHz. b) Set the VBW = 300KHz. c) Sweep time = auto couple. d) Detector function = peak. e) Trace mode = max hold. f) Allow trace to fully stabilize.. 12.4 EUT Operating Conditions The EUT tested system was configured as the statements of 4.6 Unless otherwise a special operating condition is specified in the follows during the testing. Note: Power Spectral Density(dBm)=Reading+Cable Loss Report No.: BCTC2606051300-3E No.：BCTC/KJ-RF-ICT-001 Page 81 of 145 Edition：B.1 12.5 Test Result Ant A Test Graphs Band Edge NVNT b 2412MHz Ant A Ref Band Edge NVNT b 2412MHz Ant A Emission Report No.: BCTC2606051300-3E No.：BCTC/KJ-RF-ICT-001 Page 82 of 145 Edition：B.1 Band Edge NVNT b 2462MHz Ant A Ref Band Edge NVNT b 2462MHz Ant A Emission Report No.: BCTC2606051300-3E No.：BCTC/KJ-RF-ICT-001 Page 83 of 145 Edition：B.1 Band Edge NVNT g 2412MHz Ant A Ref Band Edge NVNT g 2412MHz Ant A Emission Report No.: BCTC2606051300-3E No.：BCTC/KJ-RF-ICT-001 Page 84 of 145 Edition：B.1 Band Edge NVNT g 2462MHz Ant A Ref Band Edge NVNT g 2462MHz Ant A Emission Report No.: BCTC2606051300-3E No.：BCTC/KJ-RF-ICT-001 Page 85 of 145 Edition：B.1 Band Edge NVNT n20 2412MHz Ant A Ref Band Edge NVNT n20 2412MHz Ant A Emission Report No.: BCTC2606051300-3E No.：BCTC/KJ-RF-ICT-001 Page 86 of 145 Edition：B.1 Band Edge NVNT n20 2462MHz Ant A Ref Band Edge NVNT n20 2462MHz Ant A Emission Report No.: BCTC2606051300-3E No.：BCTC/KJ-RF-ICT-001 Page 87 of 145 Edition：B.1 Band Edge NVNT n40 2422MHz Ant A Ref Band Edge NVNT n40 2422MHz Ant A Emission Report No.: BCTC2606051300-3E No.：BCTC/KJ-RF-ICT-001 Page 88 of 145 Edition：B.1 Band Edge NVNT n40 2452MHz Ant A Ref Band Edge NVNT n40 2452MHz Ant A Emission Report No.: BCTC2606051300-3E No.：BCTC/KJ-RF-ICT-001 Page 89 of 145 Edition：B.1 Band Edge NVNT ax20 2412MHz Ant A Ref Band Edge NVNT ax20 2412MHz Ant A Emission Report No.: BCTC2606051300-3E No.：BCTC/KJ-RF-ICT-001 Page 90 of 145 Edition：B.1 Band Edge NVNT ax20 2462MHz Ant A Ref Band Edge NVNT ax20 2462MHz Ant A Emission Report No.: BCTC2606051300-3E No.：BCTC/KJ-RF-ICT-001 Page 91 of 145 Edition：B.1 Band Edge NVNT ax40 2422MHz Ant A Ref Band Edge NVNT ax40 2422MHz Ant A Emission Report No.: BCTC2606051300-3E No.：BCTC/KJ-RF-ICT-001 Page 92 of 145 Edition：B.1 Band Edge NVNT ax40 2452MHz Ant A Ref Band Edge NVNT ax40 2452MHz Ant A Emission Report No.: BCTC2606051300-3E No.：BCTC/KJ-RF-ICT-001 Page 93 of 145 Edition：B.1 Conducted RF Spurious Emission Test Graphs Tx. Spurious NVNT b 2412MHz Ant A Ref Tx. Spurious NVNT b 2412MHz Ant A Emission Report No.: BCTC2606051300-3E No.：BCTC/KJ-RF-ICT-001 Page 94 of 145 Edition：B.1 Tx. Spurious NVNT b 2437MHz Ant A Ref Tx. Spurious NVNT b 2437MHz Ant A Emission Report No.: BCTC2606051300-3E No.：BCTC/KJ-RF-ICT-001 Page 95 of 145 Edition：B.1 Tx. Spurious NVNT b 2462MHz Ant A Ref Tx. Spurious NVNT b 2462MHz Ant A Emission Report No.: BCTC2606051300-3E No.：BCTC/KJ-RF-ICT-001 Page 96 of 145 Edition：B.1 Tx. Spurious NVNT g 2412MHz Ant A Ref Tx. Spurious NVNT g 2412MHz Ant…

Text truncated - open the document above for the full version.

Report No.: BCTC2606051300-3E No.：BCTC/KJ-RF-ICT-001 Page 123 of 145 Edition：B.1 Conducted RF Spurious Emission Test Graphs Tx. Spurious NVNT b 2412MHz Ant B Ref Tx. Spurious NVNT b 2412MHz Ant B Emission Report No.: BCTC2606051300-3E No.：BCTC/KJ-RF-ICT-001 Page 124 of 145 Edition：B.1 Tx. Spurious NVNT b 2437MHz Ant B Ref Tx. Spurious NVNT b 2437MHz Ant B Emission Report No.: BCTC2606051300-3E No.：BCTC/KJ-RF-ICT-001 Page 125 of 145 Edition：B.1 Tx. Spurious NVNT b 2462MHz Ant B Ref Tx. Spurious NVNT b 2462MHz Ant B Emission Report No.: BCTC2606051300-3E No.：BCTC/KJ-RF-ICT-001 Page 126 of 145 Edition：B.1 Tx. Spurious NVNT g 2412MHz Ant B Ref Tx. Spurious NVNT g 2412MHz Ant B Emission Report No.: BCTC2606051300-3E No.：BCTC/KJ-RF-ICT-001 Page 127 of 145 Edition：B.1 Tx. Spurious NVNT g 2437MHz Ant B Ref Tx. Spurious NVNT g 2437MHz Ant B Emission Report No.: BCTC2606051300-3E No.：BCTC/KJ-RF-ICT-001 Page 128 of 145 Edition：B.1 Tx. Spurious NVNT g 2462MHz Ant B Ref Tx. Spurious NVNT g 2462MHz Ant B Emission Report No.: BCTC2606051300-3E No.：BCTC/KJ-RF-ICT-001 Page 129 of 145 Edition：B.1 Tx. Spurious NVNT n20 2412MHz Ant B Ref Tx. Spurious NVNT n20 2412MHz Ant B Emission Report No.: BCTC2606051300-3E No.：BCTC/KJ-RF-ICT-001 Page 130 of 145 Edition：B.1 Tx. Spurious NVNT n20 2437MHz Ant B Ref Tx. Spurious NVNT n20 2437MHz Ant B Emission Report No.: BCTC2606051300-3E No.：BCTC/KJ-RF-ICT-001 Page 131 of 145 Edition：B.1 Tx. Spurious NVNT n20 2462MHz Ant B Ref Tx. Spurious NVNT n20 2462MHz Ant B Emission Report No.: BCTC2606051300-3E No.：BCTC/KJ-RF-ICT-001 Page 132 of 145 Edition：B.1 Tx. Spurious NVNT n40 2422MHz Ant B Ref Tx. Spurious NVNT n40 2422MHz Ant B Emission Report No.: BCTC2606051300-3E No.：BCTC/KJ-RF-ICT-001 Page 133 of 145 Edition：B.1 Tx. Spurious NVNT n40 2437MHz Ant B Ref Tx. Spurious NVNT n40 2437MHz Ant B Emission Report No.: BCTC2606051300-3E No.：BCTC/KJ-RF-ICT-001 Page 134 of 145 Edition：B.1 Tx. Spurious NVNT n40 2452MHz Ant B Ref Tx. Spurious NVNT n40 2452MHz Ant B Emission Report No.: BCTC2606051300-3E No.：BCTC/KJ-RF-ICT-001 Page 135 of 145 Edition：B.1 Tx. Spurious NVNT ax20 2412MHz Ant B Ref Tx. Spurious NVNT ax20 2412MHz Ant B Emission Report No.: BCTC2606051300-3E No.：BCTC/KJ-RF-ICT-001 Page 136 of 145 Edition：B.1 Tx. Spurious NVNT ax20 2437MHz Ant B Ref Tx. Spurious NVNT ax20 2437MHz Ant B Emission Report No.: BCTC2606051300-3E No.：BCTC/KJ-RF-ICT-001 Page 137 of 145 Edition：B.1 Tx. Spurious NVNT ax20 2462MHz Ant B Ref Tx. Spurious NVNT ax20 2462MHz Ant B Emission Report No.: BCTC2606051300-3E No.：BCTC/KJ-RF-ICT-001 Page 138 of 145 Edition：B.1 Tx. Spurious NVNT ax40 2422MHz Ant B Ref Tx. Spurious NVNT ax40 2422MHz Ant B Emission Report No.: BCTC2606051300-3E No.：BCTC/KJ-RF-ICT-001 Page 139 of 145 Edition：B.1 Tx. Spurious NVNT ax40 2437MHz Ant B Ref Tx. Spurious NVNT ax40 2437MHz Ant B Emission Report No.: BCTC2606051300-3E No.：BCTC/KJ-RF-ICT-001 Page 140 of 145 Edition：B.1 Tx. Spurious NVNT ax40 2452MHz Ant B Ref Tx. Spurious NVNT ax40 2452MHz Ant B Emission Report No.: BCTC2606051300-3E No.：BCTC/KJ-RF-ICT-001 Page 141 of 145 Edition：B.1 13. Duty Cycle Of Test Signal 13.1 Standard Requirement Pre-analysis Check: While conducting average power measurement, duty cycle of each mode shall be checked to ensure its duty cycle in order to compensate for the loss due to insufficient ratio of duty cycle. All duty cycle is pre-scanned, and result as obtained below shows only the most representative ones where duty cycle is conducted as the given transmission with given virtual operation that expresses the percentage. 13.2 Formula Duty Cycle = Ton / (Ton+Toff) 13.3 Test Procedure 1.Set span = Zero 2. RBW = 8MHz 3. VBW = 8MHz, 4. Detector = Peak 13.4 Test Result Condition Mode…

Text truncated - open the document above for the full version.