2BWZY-PD-D35Magnetic Wireless Charger

Magnetic Wireless Charger Model:PD-D35 FCC ID:2BWZY-PD-D35 SKUs:PD-D36(1M),PD-D37(1.8M),SW-140(3 M) What'sintheBox ● Magnetic wireless charger(HBK-W006) ● [NOTE:Required 35W USB- C power adapternot included] Speci fi cations Weight Input Output Devices ● 25W MAX Product ● Charges iPhone12 and beyond ● AirpodsPro,AirPodsPro2,AirPods Gen3 ●Any other MagSafe, Qi1 or Qi2 capable phone Overview Charging 1. Magnetic charging connector with a smooth surface feel 2. High-quality ABS plastic base 3. USB-C input Tips Magnetic wireless charger features a magnetic charger.To begin charging, Just install it and attach it to the corresponding magnet position on the back of the phone Works with MagSafe,iPhone 12 and later. Size ● 62.5.0g ●58 x 8 ●1800mm (includingcable) ●30W Disposal of Product and Packaging Packaging:All paper and cardboard based materials may be placed in a recycling bin. Any plastic or foam components are not recyclable and should be disposed of with other landfill waste. Product:Should your product become damaged or defective,and is no longer covered under warranty,please responsibly dispose of the product at your locale-waste collec tioncenter.If ane-waste collection center is unavailable to you please contact us at [email protected] and we will accept your used device back for responsible disposal. Warranty All products come with a 1-year limited warranty. This warranty covers manufacturing defects in materials and workmanship, and excludes failures resulting from normal wear and tear, misuse, abuse, or unauthorized product modification. If your product malfunctions within the warranty period, we will replace it with a brand-new unit. We cannot guarantee that your requested style or model will be in stock when processing your warranty claim. However, we will offer a proper solution and you will not be left without recourse. Should this occur, please contact us via email at [email protected]. We will provide the best feasible solution for you. For full details of our warranty policy, please visit our warranty page. We shall not be liable for any losses arising from the use of this product. This warranty does not cover the repair or replacement of other electronic devices or any personal belongings. Contact [email protected] Legal FCC Statement NOTE:This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: •Reorient or relocate the receiving antenna. •Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit di ff erent from that to which the receiver is connected. •Consult the dealer or an experienced radio/TV technician for help. RF Exposure Warning Statements: FCC Radiation Exposure Statment This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.This equipment should be installed and operated with a minimum distance of 20cm between the radiator and you body. Statement for IC This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innova tion,Science and Economic Development Canadaslicence-exemptRSS(s).Operation is subject to the following two conditions: 1This device may not cause interference. 2This device mus taccept any interference,including interference that may cause undesired operation of the device. Lémetteur/récepteur exempt de licence contenu dans leprésent appareil est conforme aux CNR dInnovation,Sciences et Développement économique Canada applicables aux appareils radio exempts de licence.Lexploitation est autorisée aux deux conditions suiva ntes: 1Lappareil ne doit pas produire de brouillage; 2Lappareil doit accepter tout brouillage radioélectrique subi,même si le brouillage est susceptible den compromettre le fonctionnement. Radio Frequency Exposure Statement for IC This equipment complies with IC exposure limits set forth for an uncontrolled environment.This equipment shall be installed and operated with minimum distance 10cm between the radiator and body. Cet équipement est conforme aux limites dexposition IC dénies pour un environnement non contrôlé.Cet équipement doit êtreinstallé et utilisé avec une distance minimale de 10 cm entre le radiateur et la carrosserie.

1/1 USAgentforServiceofProcessLETTEROFATTESTATION TO: OfficeofEngineeringTechnology FederalCommunicationsCommission 7435OaklandMillsRoad Columbia,MD21046 USAgentforServiceofProcess: CompanyName:HOPEKCORPORATIONINC Address:16755CoyoteBushDrUnit84,SanDiego,CA92127UnitedStates FRN:0034562900 ContactName:YangyangXu TelephoneNo:(561)875-9826 E-mail:[email protected] ThisletteristoconfirmthattheUSAgentforServiceofProcessacceptsresponsibilitytoactas alocalrepresentativeonbehalfofHongKongHengruidaInternationalCo.,Limited TheUSAgentforServiceofProcessisawareofandagreestocomplywiththerequirements outlinedintheFCCEquipmentAuthorizationProgram,ReportandOrderFCC22-84,andclause §2.911. Applicant: CompanyName:HongKongHengruidaInternationalCo.,Limited ProductDescription:MagneticWirelessCharger FRN:0038638276 GranteeCode:2BWZY FCCID:2BWZY-PD-D35 ContactName:HAIZHENYU Address:FLATC101,1/F,BLOCK2,CAMELPAINTBLDG,62HOIYUENROAD,KWUNTONG, HONGKONG TelephoneNo:+85268809438 E-mail:[email protected] TheApplicantisawareofandagreestocomplywiththerequirementsoutlinedintheFCC EquipmentAuthorizationProgram,ReportandOrderFCC22-84,andclause§2.911. ThisAgreementisvaliduntil(Permanentlyvalid). Date:2026/7/27 Applicant’sName: HongKongHengruidaInternationalCo., Limited USAgentforServiceofProcess’sName: HOPEKCORPORATIONINC Title:ManagerTitle:Manager SignatureSignature

Rev 1/26/2023 Hong Kong Hengruida International Co., Limited Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: July 27, 2026 Ref: Attestation Statements Part 2.911(d)(5)(i) Filing FCC ID: 2BWZY-PD-D35 [Hong Kong Hengruida International Co., Limited] certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. [Hong Kong Hengruida International Co., Limited] certifies that the equipment for which authorization is sought does not include cybersecurity or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors and assignees, including equipment with integrated Kaspersky Lab, Inc. (or any of its successors and assignees) cybersecurity or anti-virus software pursuant to DA-24-886 and KDB 986446 D01 Covered Equipment Guidance section B(2a). Device is inherently compliant based on hardware limitations or software controls. or A Software Bill of Materials (SBOM) is provided to the TCB for review, and The end-user or third parties cannot install additional software on this device. Sincerely, (Applicant signature) (Applicant printed name) HAIZHEN YU Rev 1/26/2023 Hong Kong Hengruida International Co., Limited Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: July 27, 2026 Ref: Attestation Statements Part 2.911(d)(5)(ii) Filing FCC ID: 2BWZY-PD-D35 [Hong Kong Hengruida International Co., Limited] certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Sincerely, (Applicant signature) (Applicant printed name) HAIZHEN YU

Effective Date: April 2, 2020 QSF 7.6.4-8 – Agent Authorization Letter Template Page 1 of 1 Revision Date: Revision: 0 Hong Kong Hengruida International Co., Limited Date: July 27, 2026 Product Model Number: PD-D35, PD-D36, PD-D37, SW140 FCC ID: 2BWZY-PD-D35 To whom it may concern, Re: Product Certification Representative Authorization Letter We authorize QAI Laboratories Ltd. 3980 North Fraser Way, Burnaby B.C. Canada V5J 5K5 to act on our behalf on all matters concerning the above named equipment. This shall include the following:  Testing  Approval applications and procedures We declare that QAI Laboratories Ltd. is allowed to forward all information related to the approval project to the applied certification body and to the notification entities and to discuss any issues concerning the approval application. Any and all acts carried out by QAI Laboratories Ltd. on our behalf shall have the same effect as acts of our own. By: Contact Listed on FCC Wesbite Title: Manager Email: [email protected] Telephone: +852 68809438 On behalf of: Hong Kong Hengruida International Co., Limited

Hong Kong Hengruida International Co., Limited Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: July 29, 2026 Subject; Request for Confidentiality FCC ID: 2BWZY-PD-D35 To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure Software Security Requirements for UNII devices In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: HAIZHEN YU Title: Manager

Hong Kong Hengruida International Co., Limited Family models declaration letter June 22, 2026 We Hong Kong Hengruida International Co., Limited Of FLAT C101 , 1/F, BLOCK 2, CAMELPAINT BLDG, 62 HOI YUEN ROAD, KWUN TONG, HONG KONG Declare under our sole responsibility that the product FCC ID: 2BWZY-PD-D35 Product: Magnetic Wireless Charger Model Number: PD-D35, PD-D36, PD-D37, SW140 All the models are the same circuit and module, except the colour, length and model No.. HAIZHEN YU/ Manager E-mail : [email protected] Phone : +852 68809438 Fax : +852 68809438 Address : FLAT C101 , 1/F, BLOCK 2, CAMELPAINT BLDG, 62 HOI YUEN ROAD, KWUN TONG, HONG KONG

Ext Photos Model: PD-D35 Photo 1 Photo 2 Photo 3 Photo 4 Photo 5 Photo 6 Photo 7

Magnetic Wireless Charger Model:PD-D35 Seller: Hong Kong Hengruida International Co.,Limited Input:DC5V3A 9V3A 12V2.91A 15V2.33A Output: 5W 7.5W10W15W25W FCC ID:2BWZY-PD-D35 Made In China Size 40mm*18.5mm

Int Photos Model: PD-D35 Photo 1 Photo 2 Photo 3 Photo 4 ANT Photo 5 Photo 6

- Page 1 of 11 - Report No.: HB20260717001E-02 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com RF EXPOSURE Test Report Product: Magnetic Wireless Charger Trade Mark: N/A Model Number: PD-D35 FCC ID: 2BWZY-PD-D35 Prepared for Hong Kong Hengruida International Co., Limited FLAT C101 , 1/F, BLOCK 2, CAMELPAINT BLDG, 62 HOI YUEN ROAD, KWUN TONG, HONG KONG Prepared by Shenzhen HongBiao Certification& Testing Co., Ltd Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen, China Tel.: +86-755-2998 9321 Fax.: +86-755-2998 5110 Website: http://www.sz-hongbiao.com - Page 2 of 11 - Report No.: HB20260717001E-02 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com Table of Contents 1 GENERAL DESCRIPTION ..................................................................................................................................... 5 1.1 DESCRIPTION OF EUT ................................................................................................................................................ 5 1.2 TEST MODE .............................................................................................................................................................. 5 1.3 TEST SETUP .............................................................................................................................................................. 5 1.4 ANCILLARY EQUIPMENT .............................................................................................................................................. 5 2 TEST FACILITIES AND ACCREDITATIONS .............................................................................................................. 6 2.1 TEST LABORATORY ..................................................................................................................................................... 6 2.2 ENVIRONMENTAL CONDITIONS ..................................................................................................................................... 6 2.3 MEASUREMENT UNCERTAINTY ..................................................................................................................................... 6 2.4 TEST SOFTWARE ........................................................................................................................................................ 6 3 LIST OF TEST EQUIPMENT .................................................................................................................................. 7 4 RF EXPOSURE..................................................................................................................................................... 8 4.1 MAXIMUM PERMISSIBLE EXPOSURE .............................................................................................................................. 8 4.1.1. Limit ............................................................................................................................................................ 8 4.1.2. Test Procedures ........................................................................................................................................... 8 4.1.3. Test Setup .................................................................................................................................................... 8 4.1.4. Test Result ................................................................................................................................................... 8 5 PHOTOGRAPHS OF THE TEST SETUP ..................................................................................................................11 - Page 3 of 11 - Report No.: HB20260717001E-02 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com TEST RESULT CERTIFICATION Applicant’s Name ................. : Hong Kong Hengruida International Co., Limited Address ................................. : FLAT C101 , 1/F, BLOCK 2, CAMELPAINT BLDG, 62 HOI YUEN ROAD, KWUN TONG, HONG KONG Manufacturer's Name .......... : Hong Kong Hengruida International Co., Limited Address ................................. : FLAT C101 , 1/F, BLOCK 2, CAMELPAINT BLDG, 62 HOI YUEN ROAD, KWUN TONG, HONG KONG Product description Product name ........................ : Magnetic Wireless Charger Model Number ....................... : PD-D35 Standards ............................. : FCC CFR 47 PART 1 , 1.1310 Test procedure ....................... : KDB 680106 D01 Wireless Power Transfer v04 This device described above has been tested by Shenzhen HongBiao Certification& Testing Co., Ltd and the test results show that the equipment under test (EUT) is in compliance with the EMC requirements. And it is applicable only to the tested sample identified in the report. Date of Test ........................................... : Date (s) of performance of tests ............. : July 17, 2026~July 27, 2026 Test Result .............................................. : Pass Testing Engineer : ( Z o e Su) Technical Manager : (M i n g L i u) Authorized Signatory : (L e o S u) - Page 4 of 11 - Report No.: HB20260717001E-02 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com Revision History Revised No. Date of Issue Description 01 July 27, 2026 Origina…

Text truncated - open the document above for the full version.

Shenzhen Shuoxun Electronics Co., Ltd. No. 1513, Dongfang Technology Building, 16 Ke Yuan Road, Qian Yuan Community, Yuehai Street, Nan Shang District, Shenzhen City 1 规格承认书 Specification for Approval 供应商确认 Supplier Approve 客户确认 Customer Approve 拟制 Prepared by 审核 Checked by 批准 Approval by Yang Maoxin 客户： Customer： 客户料号： Customer Part No.： SX222-7 供应商： Supplier： 规格描述： Spec description： Φ41.5*5.2*0.8/Φ20*0.72 0.08*65*11TS 8.1uh 供应商料号： Supplier Part No.： J-SXMPP-2( SX222-7) 日期： Date ： 2025/9/17 版本： Version： A.0 Shenzhen Shuoxun Electronics Co., Ltd. 2 1. 尺寸规格 Dimension specification 单位(Unit):毫米(mm) A B C D E F G 21±0.5 39±1 0.75±0.05 6±13±1 41.5±1 1.65~1.85 Shenzhen Shuoxun Electronics Co., Ltd. 3 2. 原理图 Schematic diagram 3. 电器特性 Electronic character 温度 TEMPERATURE:25±10°C,湿度RELATIVE HUMIDITY :65±20% 项目 TIEM 标准 SPECIFICATION 测试条件 TEST FREQUENCY 测试仪器 TEST EQUIPMENTS IND 8.1UH±5% 100 KHZ/1.0V LCRMETRTH2830N DCR 80mΩ Max \ PH2511S Q 60Min 100 KHZ/1.0V LCRMETRTH2830N Operating Temperature and Humindity/工 作温度和湿度 -30°C~80°C / 30%~90% Storage Temperature and Humindity/存储 温度和湿度 -40°C~90°C / 30%~90% 4. 线圈参数 Coil specification 圈数 Turns 线径 Wire Dia. 绕线方式疏/密 Wdg. Type Spred/Close 绕线方向 Wdg.Direction 相交是/否 Intersect Yes/Not 线圈正/反贴 Coil Positive/Anti Paste 11T S 0.08*65P 热⻛绞线 (Hot- Wire ) 密绕 （Close） 顺时针 (C.W.) 相交 （Yes） 反贴 (Anti/-Paste) Shenzhen Shuoxun Electronics Co., Ltd. 4 5. 材料清单 Bill of materials 序号 number 材料名称 Material name 品名描述 Description 物料代码 Material Code 1 wire rod 0.08 * 65P Self-adhesive Hot Air Twisted Pair Cable 2 hard magnetic Large: Φ41.5 * 5.2 * 0.8H (double groove) Small: Φ20 * 0.72 Straight groove 3 Adhesive JS-E103 (Thickened) White Adhesive 4 Double-sided adhesive tape Φ40*0.1

- Page 1 of 32 - Report No.: HB20260717001E-01 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com Test Report Product: Magnetic Wireless Charger Trade Mark: N/A Model Number: PD-D35 FCC ID: 2BWZY-PD-D35 Prepared for Hong Kong Hengruida International Co., Limited FLAT C101 , 1/F, BLOCK 2, CAMELPAINT BLDG, 62 HOI YUEN ROAD, KWUN TONG, HONG KONG Prepared by Shenzhen HongBiao Certification& Testing Co., Ltd Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen, China Tel.: +86-755-2998 9321 Fax.: +86-755-2998 5110 Website: http://www.sz-hongbiao.com - Page 2 of 32 - Report No.: HB20260717001E-01 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com Table of Contents 1 GENERAL DESCRIPTION ..................................................................................................................................... 5 1.1 DESCRIPTION OF EUT ................................................................................................................................................ 5 1.2 TEST MODE .............................................................................................................................................................. 5 1.3 TEST SETUP .............................................................................................................................................................. 6 1.4 POWER SETTING CONFIGURATION PARAMETERS ............................................................................................................... 6 1.5 ANCILLARY EQUIPMENT .............................................................................................................................................. 6 2 SUMMARY OF TEST RESULT ............................................................................................................................... 7 3 TEST FACILITIES AND ACCREDITATIONS .............................................................................................................. 8 3.1 TEST LABORATORY ..................................................................................................................................................... 8 3.2 ENVIRONMENTAL CONDITIONS ..................................................................................................................................... 8 3.3 MEASUREMENT UNCERTAINTY ..................................................................................................................................... 8 3.4 TEST SOFTWARE ........................................................................................................................................................ 9 4 LIST OF TEST EQUIPMENT .................................................................................................................................10 5 TEST ITEM AND RESULTS ...................................................................................................................................12 5.1 ANTENNA REQUIREMENT .......................................................................................................................................... 12 5.2 CONDUCTED EMISSION ............................................................................................................................................. 13 5.3 RADIATED EMISSION ................................................................................................................................................ 17 5.4 OCCUPIED BANDWIDTH ............................................................................................................................................ 22 6 PHOTOGRAPHS OF THE TEST SETUP ..................................................................................................................24 7 PHOTOGRAPHS OF THE EUT..............................................................................................................................26 - Page 3 of 32 - Report No.: HB20260717001E-01 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com TEST RESULT CERTIFICATION Applicant’s Name ................. : Hong Kong Hengruida International Co., Limited Address ................................. : FLAT C101 , 1/F, BLOCK 2, CAMELPAINT BLDG, 62 HOI YUEN ROAD, KWUN TONG, HONG KONG Manufacturer's Name .......... : Hong Kong Hengruida International Co., Limited Address ................................. : FLAT C101 , 1/F, BLOCK 2, CAMELPAINT BLDG, 62 HOI YUEN ROAD, KWUN TONG, HONG KONG Product description Product name ........................ : Magnetic Wireless Charger Model Number ....................... : PD-D35 Standards ............................. : FCC Part 15C Test procedure ....................... : IEEE/ANSI C63.10-2020 + Cor. 1-2023 + C63.10a-2024 + Errata to C63.10a-2024 This device described above has been tested by Shenzhen HongBiao Certification& Testing Co., Ltd and the test results show that the equipment under test (EUT) is in compliance with the EMC requirements. And it is applicable only to the tested sample identified in the report. Date of Test ........................................... : Date (s) of performance of tests ............. : July 17, 2026~July 27, 2026 Test Result .............................................. : Pass Testing Engineer : ( Z o e Su) Technical Manager : (M i n g Liu) Authorized Signatory : (L e o S u) - Page 4 of 32 - Report No.: HB20260717001E-01 Ad…

Text truncated - open the document above for the full version.

- Page 1 of 2 - Photographs of the Test Setup Model: PD-D35 Radiated Emission Below 30MHz Radiated Emission Above 30MHz - Page 2 of 2 - Conducted emission MPE