Text extracted from the exhibit documents filed with the FCC. Open a document above to read the original.
ZhejiangWONZTechnologyCo.,Ltd. 2.911(d)(5)(i)EquipmentTypeAttestationv1.2 Section2.911(d)(5)(i)Certification–EquipmentType Companyname:ZhejiangWONZTechnologyCo.,Ltd. Address:LupuTownpharmaceuticalpackagingIndustrialPark,YuhuanCity,TaizhouCity,Zhejiang Province,China ProductName:taVNSDevice FCCID:2BX52-A5202 Model(s):A5202,A5200 2.911(d)(5)(i)EquipmentType We,[ZhejiangWONZTechnologyCo.,Ltd.](“theapplicant”)certifythattheequipmentforwhich authorizationissoughtthroughcertificationisnot: Prohibitedfromreceivinganequipmentauthorizationpursuantto§2.903;oftheFCCrules. Identifiedasanequipmenttypeinthe“CoveredList” NOTE1 Yourssincerely, Name:XuzhaoDengDate:2026-09-10 TitleandCompanyname:QualityManager/ZhejiangWONZTechnologyCo.,Ltd. NOTE1 “CoveredList”;istheListofEquipmentandServicesCoveredBySection2ofTheSecureNetworksAct,availableat https://www.fcc.gov/supplychain/coveredlist References; 1)986446D01CoveredEquipmentv01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2)FederalRegisterdocument2022-28263publishedon02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the
ZhejiangWONZTechnologyCo.,Ltd. 2.911(d)(5)(ii)ApplicantAttestationv1.3 Section2.911(d)(5)(ii)Certification–Applicant(CoveredList) Companyname:ZhejiangWONZTechnologyCo.,Ltd. Address:LupuTownpharmaceuticalpackagingIndustrialPark,YuhuanCity,TaizhouCity,Zhejiang Province,China ProductName:taVNSDevice FCCID:2BX52-A5202 Model(s):A5202,A5200 2.911(d)(5)(ii)Applicantfiling We,[ZhejiangWONZTechnologyCo.,Ltd.](“theapplicant”)certifythat,asofthedateofthefiling oftheapplication,theapplicantisnotidentified NOTE1 onthe“CoveredList” NOTE2 ,established pursuantto§1.50002ofthischapter,asanentityproducingcoveredcommunicationsequipment. Yourssincerely, Name:XuzhaoDengDate:2026-09-10 TitleandCompanyname:QualityManager/ZhejiangWONZTechnologyCo.,Ltd. NOTE1 Deleteoptionnotapplicabletothisapplication. NOTE2 “CoveredList”;istheListofEquipmentandServicesCoveredBySection2ofTheSecureNetworksAct,availableat https://www.fcc.gov/supplychain/coveredlist References; 1)986446D01CoveredEquipmentv01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2)FederalRegisterdocument2022-28263publishedon02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the
Zhejiang WONZ Technology Co., Ltd. U.S. Agent Designation for Service of Process (Applicant and U.S. Agent are Separate Parties) TO: Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 ATTENTION: FCC Certification – Section 2.911(d)(7) Information Designated U.S. Agent Company Name: Baihetian Innovative Solutions FRN: 0033401605 Contact Name: Kenneth Young Street Address: 6837 Chase Rd City/Province/Zip: Dearborn, MI 48126 Telephone No: 313-395-3113 Email: [email protected] This letter is to confirm that we (“Baihetian Innovative Solutions) have accepted the responsibility to act as the Designated U.S. Agent for Service of Process as required by section 47 CFR 2.911(d)(7) on behalf of the Applicant noted below. U.S. Agent Signature: Date: Sept 14, 2026 Signed by (Printed Name/Title): Kenneth Young/Manager The Applicant acknowledges that they must maintain an agent for no less than one year after terminating all marketing and importation OR the conclusion of any Commission-related proceeding involving the equipment. The applicant further acknowledges their responsibility to inform the FCC whenever the Designated U.S. Agent information above changes. Applicant Company name: Zhejiang WONZ Technology Co., Ltd. Grantee Code: 2BX52 FRN: 0038863288 Contact Name: Xuzhao Deng Street Address: Lupu Town pharmaceutical packaging Industrial Park, Yuhuan City City/Province/Zip: Taizhou City, Zhejiang Province, China Telephone No: 8613537550623 Email: [email protected] Applicant Signature: Date: 2026-09-10 Signed by (Printed Name/Title): Xuzhao Deng / Quality Manager FCC ID：2BX52-A5202 Sep 2026
ZhejiangWONZTechnologyCo.,Ltd. LupuTownpharmaceuticalpackagingIndustrialPark,YuhuanCity,TaizhouCity,Zhejiang Province,China Statement Product:taVNSDevice Model:A5202 AdditionalModel:A5200 Trademark:N/A WeherebystatethatThePCBboard,circuit,structureandinternalofthesemodelsarethesame,only modelnumber,colorandlabelinformationaredifferentforthesemodels.Sothetestswereperformed onmodelA5202andthetestresultsforthemaintestmodelcancoverthelistedmodels. Yourassistanceonthismatterishighlyappreciated. Yourssincerely, Signature: Date:2026/09/10 Name:XuzhaoDeng CompanyName:ZhejiangWONZTechnologyCo.,Ltd. Address:LupuTownpharmaceuticalpackagingIndustrialPark,YuhuanCity,TaizhouCity, ZhejiangProvince,China Tel/Fax:8613537550623/N/A E-Mail:[email protected]
ZhejiangWONZTechnologyCo.,Ltd. LupuTownpharmaceuticalpackagingIndustrialPark,YuhuanCity, TaizhouCity,ZhejiangProvince,China AgentAuthorization Company:ZhejiangWONZTechnologyCo.,Ltd. Address:LupuTownpharmaceuticalpackagingIndustrialPark,YuhuanCity, TaizhouCity,ZhejiangProvince,China ProductName:taVNSDevice ModelNumber(s):A5202,A5200 ProductDescription:taVNSDevice WeauthorizeMiCOMLabsInc.,575BoulderCourt,Pleasanton,California94566,USA, toactonourbehalfonallmattersconcerningthecertificationofabovenamed equipment. WedeclarethatMiCOMLabsInc.isallowedtoforwardallinformationrelatedtothe approvalandcertificationofequipmenttotheregulatoryagenciesasrequiredandto discussanyissuesconcerningtheapprovalapplication.Anyandallactscarriedoutby MiCOMLabsonourbehalfshallhavethesameeffectasactsofourown. Signature:Date:2026-09-10 Name:XuzhaoDeng Title:QualityManager Company:ZhejiangWONZTechnologyCo.,Ltd.
ZhejiangWONZTechnologyCo.,Ltd. OfficeofEngineeringTechnology FederalCommunicationsCommission 7435OaklandMillsRoad Columbia,MD21046 USA Date:09-10-2026 Subject;RequestforConfidentiality FCCID:2BX52-A5202 ToWhomItMayConcern, PursuanttotheprovisionsoftheCommission’srulesTitle47Sections§0.457and§0.459,we arerequestingtheCommissiontowithholdthefollowingattachment(s)asconfidential documentsfrompublicdisclosureindefinitely. Thesedocumentscontaindetailedsystemandequipmentdescriptionsandareconsideredas proprietaryinformationinoperationoftheequipment.Thepublicdisclosureofthesedocuments mightbeharmfultoourcompanyandwouldgivecompetitorsanunfairadvantageinthemarket. SchematicDiagram BlockDiagram PartsList OperationalDescription Inadditionaltoabovementioneddocuments,inordertocomplywiththemarketingregulations inTitle47CFR§2.803andtheimportationrulesinTitle47CFR§2.1204,whileensuringthat businesssensitiveinformationremainsconfidentialuntiltheactualmarketingofnewly authorizeddevices,werequestShortTermConfidentialityofthefollowingattachment(s); ExternalPhotos TestSetupPhotos InternalPhotos UserManual For45days,pursuanttoPublicNoticeDA04-1705. OR For180dayspursuanttoKDB726920D01. Itisourunderstandingthatallmeasurementtestreports,FCCIDlabelformatand correspondenceduringthecertificationreviewprocesscannotbegrantedasconfidential documentsandthisinformationwillbeavailableforpublicreviewoncethegrantofequipment authorizationisissued. Sincerely, Signature: Name:XuzhaoDeng Title:QualityManager
Label Artwork and Location Model:A5202 Location Label and Location: Size: L*W= 80*35.5mm FCC ID: 2BX52-A5202
Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn RF Exposure evaluation Report Reference No. ..................... : FCC ID............................................. : CTA26083102402 2BX52-A5202 Compiled by ( position+printed name+signature) . : File administrators Zoey Cao Supervised by ( position+printed name+signature) . : Project Engineer Ace Chai Approved by ( position+printed name+signature) . : RF Manager Eric Wang Date of issue .................................... : Sep. 07, 2026 Testing Laboratory Name .............. : Shenzhen CTA Testing Technology Co., Ltd. Address ............................................ : Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Applicant’s name ............................ : Zhejiang WONZ Technology Co., Ltd. Address ............................................ : Lupu Town pharmaceutical packaging Industrial Park, Yuhuan City, Taizhou City, Zhejiang Province, China Standard ........................................... : 47CFR §1.1310 47CFR §2.1091 KDB447498 D01 General RF Exposure Guidance v06 Shenzhen CTA Testing Technology Co., Ltd. All rights reserved. This publication may be reproduced in whole or in part for non-commercial purpses as long as the Shenzhen CTA Testing Technology Co., Ltd. is acknowledged as copyright owner and source of the material. Shenzhen CTA Testing Technology Co., Ltd. takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. Test item description ..................... : taVNS Device Trade Mark ....................................... : N/A Manufacturer .................................... : Zhejiang WONZ Technology Co., Ltd. Model/Type reference ...................... : A5202 Listed Models ................................... : A5200 Rating ............................................... : Input: DC 5V, 1A Battery: DC 3.7V, 1200mAh, 4.44Wh Result ............................................... : PASS Report No.: CTA26083102402 Page 2 of 8 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn T E S T R E P O R T Equipment under Test : taVNS Device Model /Type : A5202 Listed Models : A5200 Model difference : The PCB board, circuit, structure and internal of these models are the same, only model number, color and label information are different for these models. So the tests were performed on model A5202 and the test results for the main test model can cover the listed models. Applicant : Zhejiang WONZ Technology Co., Ltd. Address : Lupu Town pharmaceutical packaging Industrial Park, Yuhuan City, Taizhou City, Zhejiang Province, China Manufacturer : WONZ LIMITED Address : Chisheng Abao Science and Technology Innovation Park, Mashanmiao Road, Baihuadong Village, Dalingshan Town, Dongguan City, Guangdong Province, China Test Result: PASS The test report merely corresponds to the test sample. It is not permitted to copy extracts of these test result without the written permission of the test laboratory. Report No.: CTA26083102402 Page 3 of 8 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn Contents 1 TEST STANDARDS ............................................................................................................ 4 2 SUMMARY .......................................................................................................................... 5 2.1 General Remarks ..................................................................................................... 5 2.2 Product Description ................................................................................................. 5 2.3 Special Accessories ................................................................................................. 5 2.4 Modifications ............................................................................................................ 5 3 TEST ENVIRONMENT ....................................................................................................... 6 3.1 Address of the test laboratory .................................................................................. 6 3.2 Test Facility .............................................................................................................. 6 3.3 Statement of the measurement uncertainty ............................................................. 6 4 Test limit .............................................................................................................................. 7 4.1 Requirement ............................................................................................................ 7 4.2 Conducted Power Results ....................................................................................... 8 4.3 Manufacturing tolerance .......................................................................................... 8 4.4 Evaluation Result ..................................................................................................... 8 4.5 Simultaneous Transmission for SAR Exclusion ...................................................... 8 5 Conclusion .................................................................................................................…
Text truncated - open the document above for the full version.
深圳市金航标电子有限公司 http://www.BDS666.com - 1 - 产 品 技 术 规 格 书 SPECIFICATION 深圳市龙华区民治大道1079号展滔科技大厦C座C809室 TEL：0755-83040901 FAX：0755-83040901 拟制Prepared by： 审核Checked by ： 批准Approved by： 送样日期Formed On 产品版本Document Version ( V1.0 ) 产品型号 PART NO： KH3216-A55 客户料号CUSTOMER PART NO： 客户确认CUSTOMER APPROVED BY： 确认日期APPROVED DATE： 深圳市金航标电子有限公司 Shenzhen Kinghelm Electronics Co., Ltd. Room C809, Block C, Zhantao Technology Building, No. 1079 Minzhi Avenue, Longhua District, Shenzhen 深圳市金航标电子有限公司 http://www.BDS666.com - 2 - 目 录 Table of contents 规格书版本更改记录 Version rejigger track record ..............................3 1. 概述 Introduction..................................................................4 2. 外型尺寸及测试板焊盘尺寸 D i m e n s i o n s.....................4～5 3. 测试电路和匹配电路 Evaluation Board and Matching Circuits............5 4. 电气性能 Electrical Characteristics..........................................6 5. 特性曲线 Characteristic curve...................................................6 6. 方向图 Radiation Pattern...................................................7～8 7. 可靠性试验后允许误差 Post Dependability Tolerance ...............9 8. 可靠性试验 Dependability Test..........................................9～10 9. 回流焊温度 Reflow Soldering Standard Condition.....................10 10.包装尺寸 Packaging and Dimensions ....................................11 深圳市金航标电子有限公司 http://www.BDS666.com - 3 - 产品规格书版本更改记录 Version rejigger track record 版本号 Version 更改记录 Rejigger 拟制 Prepared 批准 Approve 日期 Date V1.0 首次发行 姚富鑫 贺俊驹 2018.12.07 备注： 1、更改产品电性能指标时，版本号需更换（V1.0换为V2.0、V3.0......）； 2、更改产品测试方法（包括可靠性测试条件），或更改使用条件时，当前版本号加系列（V1.0 换为V1.1、V1.2......）。 深圳市金航标电子有限公司 http://www.BDS666.com - 4 - 1. 概述 INTRODUCTION 金航标微波多层陶瓷天线LA系列产品设计用于WLAN、WiFi、蓝牙、PHS，手机 多频天线, FM等小体积SMD片式设计。 kinghelm Microwave Multi-Layer Ceramic Antenna LA series are designed to be used in WLAN、WiFi、Bluetooth、PHS、 Multiple-band Mobile phone antenna, FM, etc and compact size SMD chip design. 2. 外型尺寸 Dimensions（Unit：mm） Number Terminal Name ① INPUT ② NC Symbols L W T A Dimensions 3.2+/-0.2 1.6+/-0.2 0.6+/-0.1 0.4+/-0.1 ( Top View ) L w ① ② ( Bottom View ) A ( Side View ) T 深圳市金航标电子有限公司 http://www.BDS666.com - 5 - 3. 测试电路和匹配电路 Evaluation Board and Matching Circuits 5.1nH 1.5pF 深圳市金航标电子有限公司 http://www.BDS666.com - 6 - 4.电气性能 Electrical Characteristics 5. 特性曲线 Characteristic curve No. Item （项目） Specifications （特性） 4.1 (带匹配电路测试)After Matching 2450 MHz 4.2 Band Width 通带宽度 100MHz typ. 4.3 Peak Gain 峰值增益 4.75 dBi 4.4 V.S.W.R 驻波比 ≤2.0 4.5 Polarization 极化方式 Linear 线性 4.6 Azimuth Beam width 方位角 Omni-directional 全向 4.7 Impedance 阻抗 50 Ω 深圳市金航标电子有限公司 http://www.BDS666.com - 7 - 6. 方向图 Radiation Pattern coordinates： X-Z Plane Y-Z Plane 深圳市金航标电子有限公司 http://www.BDS666.com - 8 - X-Y Plane 3D Radiation Pattern Frequency (MHz) 2400 2450 2500 Avg. Gain (dBi) -2.25 -2.23 -2.25 Peck Gain (dBi) 3.68 4.75 3.72 Efficiency (%) 68 71 69 深圳市金航标电子有限公司 http://www.BDS666.com - 9 - 7.可靠性试验后允许误差 Post Dependability Tolerance 经可靠性试验后允许比起始读数偏差见下表 Post Dependability Tolerance ( Refer to the table ) 8. 可靠性试验 Dependability Test 基准条件：温度范围 Temperature range 25±5°C 相对湿度范围 Relative Humidity range 55~75%RH 工作温度 Operating Temperature range -40°C~+85°C 8.1 耐振动 Vibration Resist 在振动频率为10~55Hz振幅为1.5mm 沿X.Y.Z方向各振动2小时后测试符合表8.1~8.4规定。 The device should satisfy the electrical characteristics specified in paragraph 8.1~8.4 after applied to the vibration of 10 to 55Hz with amplitude of 1.5mm for 2 hours each in X , Y and Z directions. 8.2 耐跌落冲击 Drop Shock 在100cm高度处按X，Y，Z三个面分别自由跌落在木制地板上共3次后测试符合表8.1~8.4规 定。 The device should satisfy the electrical characteristics specified in paragraph 8.1~8.4 after dropping onto the hard wooden board from the height of 100cm for 3 times each facet of the 3 dimensions of the device. 8.3 耐焊接热 Solder Heat Proof 能承受经120~150°C的温度预热120秒后，在255°C+10°C的焊锡浸5±0.5秒，或300°C-10°C的 电烙铁焊接3±0.5秒，焊接面无损伤。 The device should be satisfied after preheating at 120°C~150°C for 120 seconds and dipping in soldering Sn at 255°C+10°C for 5±0.5 seconds，or electric iron 300°C-10°C for 3±0.5 seconds， without damnify. 8.4 推力试验 Adhesive Strength of Termination 在产品电极端子上或表面上可承受5N(≦0603)；10N(>0603)水平推力10±1秒而无明显外观损坏 与电极移位。 The device have no remarkable damage or removal of the termination after horizontal force of 5N(≦0603)；10N(>0603)with 10±1 seconds. No. Item （项目） Post Dependability Tolerance (可靠性试验后允许附加误差) 7.1 Central Frequency 中心频率 ±3 MHz 7.2 Band Width 通带宽度 ±3 MHz 7.3 Gain 增益 ±0.1 dBi 7.4 V.S.W.R (in BW) 驻波比 ±0.1 深圳市金航标电子有限公司 http://www.BDS666.com - 10 - 8.5 耐弯曲试验 Bending Resist Test 将产品按图焊在1.6±0.2mm的 PCB 板中间，由箭头方向施 力：1mm/S，弯曲距离：1.5mm，保持5±1S，产品金属层无脱落。 Weld the product to the center part of the PCB with the thickness 1.6±0.2mm as the illustration shows, and keep exerting force arrow-ward on it at speed of :1mm/S , and hold for 5±1S at the position of 1.5mm bending distance , so far , any peeling off of the product metal coating should not be detected . 8.6 耐湿热特性 Moisture Proof 在温度为60±2°C，相对湿度90~95%的恒温湿箱中放置96小时，在常温中恢复1~2小时后测 试，符合表8.1~8.4规定。 The device should satisfy the electrical characteristics specified in paragraph 8.1~8.4 after exposed to the temperature 60±2°Cand the relative humidity 90~95% RH for 96 hours and 1~2 hours recovery time under normal condition. 8.7 高温特性 High Temperature Endurance 在温度为85±5°C的恒温箱中放置96±2小时，在常温中恢复1~2小时后测试。符合表8.1~8.4 规定。 The device should satisfy the electrical characteristics specified in paragraph 8.1~8.4 after exposed to temperature 85±5°Cfor 96±2 hours and 1~2 hours recovery time under normal temperature. 8.8 低温特性 Low Temperature Endurance 在温度为-40°C±5°C低温箱中放置96±2小时后恢复1~2小时测试符合表8.1~8.4规定。 The device should also satisfy the electrical characteristics specified in paragraph 8.1~8.4 after exposed to the temperature -40°C±5°C for 96±2 hours and to 2 hours recovery time under normal temperature. 8.9 温度循环 Temperature Cycle Test 在-40°C温度中保持30分钟，再在+85°C温度中保持30分钟，共循环5次后在常温中恢复1~2 小时后测试符合表8.1~8.4规定。 The device should also satisfy the electrical characteristics specified in paragraph 8.1~8.4 after exposed to the low temperature -…
Text truncated - open the document above for the full version.
1 FCC Appendix RF Test Data for BLE Company : Zhejiang WONZ Technology Co., Ltd. EUT : taVNS Device Model Number : A5202 Report No. : CTA26083102401 FCC ID : 2BX52-A5202 Reviewed By : Eric Wang 2 Duty Cycle Condition Mode Frequency (MHz) Duty Cycle (%) Correction Factor (dB) NVNT BLE 1M 2402 36.46 4.38 NVNT BLE 1M 2440 34.87 4.58 NVNT BLE 1M 2480 28.87 5.40 3 Test Graphs Duty Cycle NVNT BLE 1M 2402MHz Duty Cycle NVNT BLE 1M 2440MHz 4 Duty Cycle NVNT BLE 1M 2480MHz 5 Maximum Conducted Output Power Condition Mode Frequency (MHz) Conducted Power (dBm) Limit (dBm) Verdict NVNT BLE 1M 2402 -6.64 30 Pass NVNT BLE 1M 2440 -3.93 30 Pass NVNT BLE 1M 2480 -5.25 30 Pass 6 -6dB Bandwidth Condition Mode Frequency (MHz) -6 dB Bandwidth (MHz) Limit -6 dB Bandwidth (MHz) Verdict NVNT BLE 1M 2402 0.687 0.5 Pass NVNT BLE 1M 2440 0.718 0.5 Pass NVNT BLE 1M 2480 0.717 0.5 Pass 7 Test Graphs -6dB Bandwidth NVNT BLE 1M 2402MHz -6dB Bandwidth NVNT BLE 1M 2440MHz 8 -6dB Bandwidth NVNT BLE 1M 2480MHz 9 Maximum Power Spectral Density Level Condition Mode Frequency (MHz) Conducted PSD (dBm/3kHz) Limit (dBm/3kHz) Verdict NVNT BLE 1M 2402 -20.66 8 Pass NVNT BLE 1M 2440 -17.20 8 Pass NVNT BLE 1M 2480 -19.33 8 Pass 10 Test Graphs PSD NVNT BLE 1M 2402MHz PSD NVNT BLE 1M 2440MHz 11 PSD NVNT BLE 1M 2480MHz 12 Band Edge Condition Mode Frequency (MHz) Max Value (dBc) Limit (dBc) Verdict NVNT BLE 1M 2402 -43.07 -20 Pass NVNT BLE 1M 2480 -52.67 -20 Pass 13 Test Graphs Band Edge NVNT BLE 1M 2402MHz Ref Band Edge NVNT BLE 1M 2402MHz Emission 14 Band Edge NVNT BLE 1M 2480MHz Ref Band Edge NVNT BLE 1M 2480MHz Emission 15 Conducted RF Spurious Emission Condition Mode Frequency (MHz) Max Value (dBc) Limit (dBc) Verdict NVNT BLE 1M 2402 -24.53 -20 Pass NVNT BLE 1M 2440 -23.16 -20 Pass NVNT BLE 1M 2480 -27.94 -20 Pass 16 Test Graphs Tx. Spurious NVNT BLE 1M 2402MHz Ref Tx. Spurious NVNT BLE 1M 2402MHz Emission 17 Tx. Spurious NVNT BLE 1M 2440MHz Ref Tx. Spurious NVNT BLE 1M 2440MHz Emission 18 Tx. Spurious NVNT BLE 1M 2480MHz Ref Tx. Spurious NVNT BLE 1M 2480MHz Emission 19 Emissions in Restricted Bands Test Mode Ch Freq (MHz) Detector Freq [MHz] Result [dBm] Gain [dBi] DC Factor [dB] Result [dBuV/m] Limit [dBuV/m] Verdict BLE 1M Low 2402 AV 2310.000 -62.93 4.75 4.38 41.40 ≤54 PASS AV 2385.900 -62.66 4.75 4.38 41.67 ≤54 PASS AV 2390.000 -62.83 4.75 4.38 41.50 ≤54 PASS Peak 2310.000 -52.55 4.75 0.00 47.40 ≤74 PASS Peak 2387.000 -39.57 4.75 0.00 60.38 ≤74 PASS Peak 2390.000 -51.83 4.75 0.00 48.12 ≤74 PASS High 2480 AV 2483.500 -61.37 4.75 5.40 43.98 ≤54 PASS AV 2496.113 -62.23 4.75 5.40 43.12 ≤54 PASS AV 2500.000 -62.15 4.75 5.40 43.20 ≤54 PASS Peak 2483.500 -42.61 4.75 0.00 57.34 ≤74 PASS Peak 2487.558 -40.67 4.75 0.00 59.28 ≤74 PASS Peak 2500.000 -51.77 4.75 0.00 48.18 ≤74 PASS Note: 1. The limit in dBm for average detector is conversion from 54dBuV/m, according to 15.209(a). The limit in dBm for peak detector is 20dB above the limit of average detector in dBm. 20 Test Graphs NVNT BLE 1M 2402MHz AV NVNT BLE 1M 2402MHz PK 21 NVNT BLE 1M 2480MHz AV NVNT BLE 1M 2480MHz PK
Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn FCC PART 15 SUBPART CTEST REPORT FCC PART 15.247 Report Reference No. .................... : FCC ID. ............................................ : CTA26083102401 2BX52-A5202 Compiled by ( position+printedname+signature) .. : File administrators Zoey Cao Supervised by (position+printedname+signature) ... : Project Engineer Ace Chai Approved by (position+printedname+signature) ... : RF Manager Eric Wang Date of issue .................................... : Sep. 07, 2026 Testing Laboratory Name .............. : Shenzhen CTA Testing Technology Co., Ltd. Address ............................................ : Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Applicant’s name............................ : Zhejiang WONZ Technology Co., Ltd. Address ............................................ : Lupu Town pharmaceutical packaging Industrial Park, Yuhuan City, Taizhou City, Zhejiang Province, China Test specification ........................... : Standard ........................................... : FCC Part 15.247 Shenzhen CTA Testing Technology Co., Ltd. All rights reserved. This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen CTA Testing Technology Co., Ltd. is acknowledged as copyright owner and source of the material. Shenzhen CTA Testing Technology Co., Ltd. takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. Equipment description .................. : taVNS Device Trade Mark ....................................... : N/A Manufacturer .................................... : WONZ LIMITED Model/Type reference ...................... : A5202 Listed Models ................................... : A5200 Modulation ........................................ : GFSK Frequency ........................................ : From 2402MHz to 2480MHz Ratings ............................................. : Input: DC 5V, 1A Battery: DC 3.7V, 1200mAh, 4.44Wh Result ............................................... : PASS Report No.: CTA26083102401 Page 2 of 29 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn T E S T R E P O R T Equipment under Test : taVNS Device Model /Type : A5202 Listed Models : A5200 Model difference : The PCB board, circuit, structure and internal of these models are the same, only model number, color and label information are different for these models. So the tests were performed on model A5202 and the test results for the main test model can cover the listed models. Applicant : Zhejiang WONZ Technology Co., Ltd. Address : Lupu Town pharmaceutical packaging Industrial Park, Yuhuan City, Taizhou City, Zhejiang Province, China Manufacturer : WONZ LIMITED Address : Chisheng Abao Science and Technology Innovation Park, Mashanmiao Road, Baihuadong Village, Dalingshan Town, Dongguan City, Guangdong Province, China Test Result: PASS The test report merely corresponds to the test sample. It is not permitted to copy extracts of these test result without the written permission of the test laboratory. Report No.: CTA26083102401 Page 3 of 29 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn Contents 1 TEST STANDARDS ...................................................................................................................................... 4 2 SUMMARY .................................................................................................................................................... 5 2.1 General Remarks .............................................................................................................................. 5 2.2 Product Description* .......................................................................................................................... 5 2.3 Equipment Under Test ....................................................................................................................... 5 2.4 Short description of the Equipment under Test (EUT) ...................................................................... 5 2.5 EUT configuration .............................................................................................................................. 5 2.6 EUT operation mode ......................................................................................................................... 6 2.7 Block Diagram of Test Setup ............................................................................................................. 6 2.8 Related Submittal(s) / Grant (s) ......................................................................................................... 6 2.9 Modifications ...................................................................................................................................... 6 3 TEST ENVIRONMENT ................................................................................................................................. 7 3.1 Address of the test laboratory ........................................................................................................... 7 3.2 Test Facility.........................................…
Text truncated - open the document above for the full version.
6837 Chase Rd · Dearborn, Michigan, 48126 · United States
| # | Rule Parts | Frequency Range | Power Output |
|---|---|---|---|
| 1 | 15C | 2.40 GHz - 2.48 GHz | 400.00 µW |