2BXD9-DQ01DUSQ Device

EZYMIND HEALTHCARE PRIVATE LIMITED A-6/1, 3rd Floor, Naraina Industrial Area, Phase-1, New Delhi, Delhi 110028, India CIN: U85100PN2024PTC232893 GST: 07AAHCE6732D1ZS [email protected] +91 9717731544 Section 2.911(d)(5)(i) Certification – Equipment Type Company name: Ezymind Healthcare Private Limited Address: A-6/1, 3rd Floor, Naraina Industrial Area, Phase-1, New Delhi, Delhi, 110028, India Product Name: DUSQ Device FCC ID: 2BXD9-DQ01 Model(s): DQ01 2.911(d)(5)(i) Equipment Type We, Ezymind Healthcare Private Limited (“the applicant”) certify that the equipment for which authorization is sought through certification is not: Prohibited from receiving an equipment authorization pursuant to § 2.903; of the FCC rules. Identified as an equipment type in the “Covered List” NOTE 1 Yours sincerely, Name: Mitansh Khurana Date: July 27, 2026 Title and Company name: Director, Ezymind Healthcare Private Limited NOTE 1 “Covered List”; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References; 1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm? switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the- communications-supply-chain-through-the 2.911 (d)(5)(i) Equipment Type Attestation v1.2

EZYMIND HEALTHCARE PRIVATE LIMITED A-6/1, 3rd Floor, Naraina Industrial Area, Phase-1, New Delhi, Delhi 110028, India CIN: U85100PN2024PTC232893 GST: 07AAHCE6732D1ZS [email protected] +91 9717731544 Section 2.911(d)(5)(ii) Certification – Applicant (Covered List) Company name: Ezymind Healthcare Private Limited Address: A-6/1, 3rd Floor, Naraina Industrial Area, Phase-1, New Delhi, Delhi, 110028, India Product Name: DUSQ Device FCC ID: 2BXD9-DQ01 Model(s): DQ01 2.911(d)(5)(ii) Applicant filing We, Ezymind Healthcare Private Limited (“the applicant”) certify that, as of the date of the filing of the application, the applicant is not identified NOTE 1 on the “Covered List” NOTE 2, established pursuant to § 1.50002 of this chapter, as an entity producing covered communications equipment. Yours sincerely, Name: Mitansh Khurana Date: July 27, 2026 Title and Company name: Director, Ezymind Healthcare Private Limited NOTE 1 Delete option not applicable to this application. NOTE 2 “Covered List”; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References; 1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm? switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the- communications-supply-chain-through-the 2.911 (d)(5)(ii) Applicant Attestation v1.3 2.911 (d)(5)(ii) Applicant Attestation v1.3

EZYMIND HEALTHCARE PRIVATE LIMITED A-6/1, 3rd Floor, Naraina Industrial Area, Phase-1, New Delhi, Delhi 110028, India CIN: U85100PN2024PTC232893 GST: 07AAHCE6732D1ZS [email protected] +91 9717731544 Certification designating a U.S. Agent for service of process: As required by section 2.911(d)(7), the applicant must designate a contact located in the United States for purposes of acting as the applicant’s agent for service of process, regardless of whether the applicant is a domestic or foreign entity. An applicant located in the United States may designate itself as the agent for service of process. In either scenario, the designation of the U.S. agent for service of process should be provided as an attachment to the equipment authorization application. The applicant must provide a written certification, which must: i. Be signed by both the applicant and designated agent for service of process, if the agent is different from the applicant. ii. Acknowledge the applicant’s consent and the designated agent’s obligation to accept service of process. iii. Provide a physical U.S. address and email for the designated agent. iv. Acknowledge the applicant’s acceptance to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Unofficial information provided by FCC personnel on February 14, 2023, via the monthly call with the TCB Council: The Agent for Process of Service: cannot be a TCB or affiliated with a TCB (e.g. could not be a person who works for a TCB or a company that owns or is owned by the TCB) cannot be a [FCC recognised] Lab or affiliated with a test lab (e.g. could not be a person who works for a Lab or a company that owns or is owned by the Lab) Agent can be Individual Entity or a Company Entity Agent Entity must be located in US, US address/phone Entity acting as Agent must have FRN (best practice, put FRN on Agent Letter) Agent letter does not have to be FCC ID specific, can be general Agent for Grantee For devices being marketed or for which marketing has ceased for less than 1 year, if the Agent for Process of Service changes, then for every TC Number the TCB must request the FCC to put application into Audit Mode and Agent Letter needs to be updated (superseded). NOTE: The U.S. Agent for Service of Process should not be confused with the authorized agent used for signing the 731 form, other cover letters within the application, and/or the agent who may interface with the TCB. U.S. Agent Designation for Service of Process ATTENTION: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA REGARDING: FCC Certification – Section 2.911(d)(7) Information Designated U.S. Agent Company Name: Approve-IT, Inc. Contact Name: Nathan Grinager Street Address: 8011 34 th Ave South, Suite 342 City/Province/Zip: Bloomington, MN 55425 Telephone No: 651-247-1678 Email: [email protected] FRN #: 0027533835 This letter is to confirm that we (“the Designated U.S. Agent) have accepted the responsibility to act as the Designated U.S. Agent for Service of Process as required by section 47 CFR 2.911(d)(7) on behalf of the Applicant noted below. U.S. Agent Signature: Date: July 28, 2026 Signed by (Printed Name/Title): Nathan Grinager / Co-President The Applicant confirms its explicit consent and acknowledges that they must maintain an agent for no less than one year after terminating all marketing and importation OR the conclusion of any Commission-related proceeding involving the equipment. The applicant further acknowledges their responsibility to inform the FCC whenever the Designated U.S. Agent information above changes. Applicant Company name: Ezymind Healthcare Private Limited Grantee FRN: 0038709002 Grantee Code: 2BXD9 FCC ID: 2BXD9-DQ01 Contact Name: Mitansh Khurana Street Address: A-6/1, 3rd Floor, Naraina Industrial Area, Phase-1 City/Province/Zip: New Delhi, Delhi, 110028, India Telephone No: +91 9717731544 Email: [email protected] Applicant Signature: Date: July 28, 2026 Signed by (Printed Name/Title): Mitansh Khurana / Director

EZYMIND HEALTHCARE PRIVATE LIMITED A-6/1, 3rd Floor, Naraina Industrial Area, Phase-1, New Delhi, Delhi 110028, India CIN: U85100PN2024PTC232893 GST: 07AAHCE6732D1ZS [email protected] +91 9717731544 Letter of Authorization Company: Ezymind Healthcare Private Limited Address: A-6/1, 3rd Floor, Naraina Industrial Area, Phase-1, New Delhi, Delhi, 110028, India Product Name: DUSQ Device Model Number(s): DQ01 FCC ID: 2BXD9-DQ01 Product Description: DUSQ is a rechargeable, battery-powered wearable wellness device with Bluetooth Low Energy connectivity. We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature : Date : July 27, 2026 Name: Mitansh Khurana Title: Director Company : Ezymind Healthcare Private Limited

EZYMIND HEALTHCARE PRIVATE LIMITED A-6/1, 3rd Floor, Naraina Industrial Area, Phase-1, New Delhi, Delhi 110028, India CIN: U85100PN2024PTC232893 GST: 07AAHCE6732D1ZS [email protected] +91 9717731544 Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: July 27, 2026 Subject; Request for Confidentiality FCC ID: 2BXD9-DQ01 To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. [ ] OR For 180 days pursuant to KDB 726920 D01. [X] It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: Mitansh Khurana Title: Director, Ezymind Healthcare Private Limited

TEST REPORT Page 1 of 8 Report Reference No. ....................... : 80260100127001 Sample ID ......................................... : BLC-01-1047806-001 Date of issue ..................................... : 12/08/2026 Total number of pages ...................... : 8 Testing Laboratory ............................ : TUV SUD South Asia Pvt Ltd Address............................................. : Plot No. 3-P1-B, Hitech Defence & Aerospace Park, KIADB Industrial Area, BK Palya, Bengaluru, Bengaluru North Taluk | Pin code – 562149 India Applicant’s name .............................. : Ezymind Healthcare Private Limited Address............................................. : A-6/1, 3rd Floor, Naraina Industrial Area, Phase-1, South West Delhi, New Delhi, Delhi, India, 110028 Client Representative................ ... .: Mr. Mitansh Khurana Test specification Standard............: RF Exposure Report FCC 47 CFR Part 2.1093 Test Method ...................................... : FCC KDB 447498 Non-standard test method............. : NA Test Report Form Number.............: LAB_F(EE)_138-049 Product Name..............................: DUSQ Device Test Item Description.....................: DUSQ is a battery-powered, rechargeable wearable wellness device comprising an electronic main module, adhesive patch interface, and charging case. DUSQ is a rechargeable, battery-powered wearable wellness device with Bluetooth Low Energy connectivity. Manufacturer ...............................: Ezymind Healthcare Private Limited Model Number..............................: DQ01 Serial Number..............................: DQDV26060010 Ratings........................................: 5V DC, 50 mA FCC ID.......................................: 2BXD9-DQ01 Prepared by (Name + Signature) ..........................: Nikhil G Reviewed & Approved by (Name + Signature) ..........................: Ayazahmad N TEST REPORT Report Reference. No.: 80260100127001 Page 2 of 8 Possible test case verdicts: - test case does not apply to the test object .... : N/A - test object does meet the requirement .......... : Pass - test object does not meet the requirement .... : Fail Testing: Condition of the EUT on Receipt.....................: Good Date of receipt of test item ............................... : 25/06/2026 Date (s) of performance of tests....................... : 07/07/2026 – 16/07/2026 General remarks: 1. The submitted sample(s) were not drawn by laboratory. 2. The test results presented in this report relate only to the object tested. 3. The results contained in this report reflect the results for this particular model and serial number. It is the responsibility of the manufacturer to ensure that all production models meet the intent of the requirements detailed within this report. 4. The correctness of the information related to sample(s) in the Test Request Form/Customer letterhead/E-mail is the customer’s responsibility. The laboratory reports the said information in the test report and is not liable for the same. 5. The laboratory will retain the sample(s) for 45 days except for the mandatory retention period specified by the Regulatory Bodies and unless otherwise specified by the client. 6. This report shall not be reproduced, except in full, without the written approval of the Issuing testing laboratory. “(see Enclosure #)” refers to additional information appended to the report. “(see appended table)” refers to a table appended to the report. 7. Throughout this report a point is used as the decimal separator. Use of uncertainty of measurement for decisions on conformity (decision rule): Yes/No No decision rule is specified by the IEC/EN standard, when comparing the measurement result with the applicable limit according to the specification in that standard. The decisions on conformity are made without applying the measurement uncertainty (“simple acceptance” decision rule, previously known as “accuracy method”). Other: (to be specified) Decisions on conformity: Decision on conformity of results is based on as per standard limits or criteria. Summary of compliance: The Product comply with the requirements of FCC 47 CFR Part 2.1093. TEST REPORT Report Reference. No.: 80260100127001 Page 3 of 8 Revision History of Records Test Report Number Version Reason for Change Date Issued 80260100127001 01 Initial Report 07/08/2026 80260100127001 02 TCB Comments 12/08/2026 TEST REPORT Report Reference. No.: 80260100127001 Page 4 of 8 CONTENTS 1 TEST SUMMARY .................................................................................................................................................................... 5 2 EQUIPMENT INFORMATION .................................................................................................................................................. 6 2.1 PRODUCT FUNCTION ............................................................................................................................................................. 6 2.2 GENERAL INFORMATION OF EUT ............................................................................................................................................. 6 3 RF EXPOSURE EVALUATION ................................................................................................................................................... 7 3.1 RF EXPOSURE COMPLIANCE REQUIREMENT ............................................................................................................................... 7 3.2 RF EXPOSURE LIMITS: .............................................................................................................. ERROR! BOOKMARK NOT DEFINED. 4 CONCLUSION ......................................................................................................................................................................... 8 TEST REPORT Report Reference. No.: 80260100127001 Page 5 of 8 1 TEST SUMMARY Sl.no Protocol, Band (MHz)…

Text truncated - open the document above for the full version.

TEST REPORT Page 1 of 52 Report Reference No. ...................... : 80260100125001 Sample ID ........................................ : BLC-01-1047806-001 Date of issue .................................... : 03/08/2026 Total number of pages ..................... : 52 Testing Laboratory ........................... : TUV SUD South Asia Pvt Ltd Address ............................................ : Plot No. 3-P1-B, Hitech Defence & Aerospace Park, KIADB Industrial Area, BK Palya, Bengaluru, Bengaluru North Taluk | Pin code – 562149 India Applicant’s name .............................. : Ezymind Healthcare Private Limited Address ............................................ : A-6/1, 3rd Floor, Naraina Industrial Area, Phase-1, South West Delhi, New Delhi, Delhi, India, 110028 Client Representative....................: Mr. Mitansh Khurana Test specification Standard............: FCC Part 15 Subpart C 15.203, 15.205, 15.209 & 15.247 Test Method ..................................... : ANSI C63.10-2020 Non-standard test method............. : NA Test Report Form Number.............: LAB_F(EE)_138-51 Product Name..............................: DUSQ Device Test Item Description.....................: DUSQ is a battery-powered, rechargeable wearable wellness device comprising an electronic main module, adhesive patch interface, and charging case. DUSQ is a rechargeable, battery-powered wearable wellness device with Bluetooth Low Energy connectivity. Manufacturer ...............................: Ezymind Healthcare Private Limited Model Number..............................: DQ01 Serial Number..............................: DQDV26060010 Ratings........................................: 5V DC, 50 mA FCC ID.......................................: 2BXD9-DQ01 IC ID..........................................: NA Tested by (Name + Signature) ..........................: Nikhil G Reviewed & Approved by (Name + Signature) ..........................: Ayazahmad N TEST REPORT Report Reference. No.: 80260100125001 Page 2 of 52 Possible test case verdicts: - test case does not apply to the test object .... : N/A - test object does meet the requirement .......... : Pass - test object does not meet the requirement .... : Fail Testing: Condition of the EUT on Receipt.....................: Good Date of receipt of test item ............................... : 25/06/2026 Date (s) of performance of tests....................... : 07/07/2026 – 16/07/2026 General remarks: 1. The submitted sample(s) were not drawn by laboratory. 2. The test results presented in this report relate only to the object tested. 3. The results contained in this report reflect the results for this particular model and serial number. It is the responsibility of the manufacturer to ensure that all production models meet the intent of the requirements detailed within this report. 4. The correctness of the information related to sample(s) in the Test Request Form/Customer letterhead/E-mail is the customer’s responsibility. The laboratory reports the said information in the test report and is not liable for the same. 5. The laboratory will retain the sample(s) for 45 days except for the mandatory retention period specified by the Regulatory Bodies and unless otherwise specified by the client. 6. This report shall not be reproduced, except in full, without the written approval of the Issuing testing laboratory. “(see Enclosure #)” refers to additional information appended to the report. “(see appended table)” refers to a table appended to the report. 7. Throughout this report a point is used as the decimal separator. Use of uncertainty of measurement for decisions on conformity (decision rule): Yes/No No decision rule is specified by the IEC/EN standard, when comparing the measurement result with the applicable limit according to the specification in that standard. The decisions on conformity are made without applying the measurement uncertainty (“simple acceptance” decision rule, previously known as “accuracy method”). Other: (to be specified) Decisions on conformity: Decision on conformity of results is based on as per standard limits or criteria. Summary of compliance: The Product comply with the requirements of FCC Part 15 Subpart C 15.203, 15.205, 15.209 & 15.247 TEST REPORT Report Reference. No.: 80260100125001 Page 3 of 52 Revision History of Records Test Report Number Version Reason for Change Date Issued 80260100125001 01 Initial Report 03/08/2026 TEST REPORT Report Reference. No.: 80260100125001 Page 4 of 52 Contents 1 GENERAL INFORMATION ....................................................................................................................................................... 5 1.1 APPENDICES ......................................................................................................................................................................... 5 2 TEST SUMMARY .................................................................................................................................................................... 6 3 MEASUREMENT UNCERTAINTY ............................................................................................................................................. 7 4 TEST EQUIPMENT USED ......................................................................................................................................................... 7 5 EQUIPMENT INFORMATION .................................................................................................................................................. 8 5.1 PRODUCT FUNCTION ............................................................................................................................................................. 8 5.2 GENERAL INFORMATION OF EUT ............................................................................................................................................. 8 6 TEST DESCRIPTION ..................…

Text truncated - open the document above for the full version.

ABRACON IS ISO9001-2015 CERTIFIED REVISION I.R.: 12-18-24 www.abracon.com Automotive-Grade 2.4GHz Loop Chip Antenna AANI-CH-0070-Q 1.0 x 0.5 x 0.4 mm RoHS/RoHS II Compliant MSL Level = 1 Request Samples Check Inventory 5101 Hidden Creek Ln Spicewood TX 78669 Phone: 512-371-6159 | Fax: 512-351-8858 For terms and conditions of sales, please visit: Features • Automotive Qualification (AEC-Q200) • PPAP Ready and Supported • TS16949 Certified Production Lines • Miniature form factor: 1.0 x 0.5 x 0.4 mm • Low return loss of: ≤ -7.2 dB • Peak Gain: 2.8 dBi • Average Total Efficiency: -1.6 dB (70%) • Surface Mount (SMD) • Integration: PCB Edge Mounting Applications • Bluetooth ® / ZigBee ® / Thread/ Matter/Wi-Fi ® • Automotive Keyless Entry • In-vehicle Entertainment Systems • Tire Pressure Monitoring (TPMS) • Cabin Environment Control • Advanced Driver Assistance Systems (ADAS) • Wireless Remote Control Product Image ABRACON IS ISO9001-2015 CERTIFIED REVISION I.R.: 12-18-24 www.abracon.com Automotive-Grade 2.4GHz Loop Chip Antenna AANI-CH-0070-Q 1.0 x 0.5 x 0.4 mm RoHS/RoHS II Compliant MSL Level = 1 Request Samples Check Inventory 5101 Hidden Creek Ln Spicewood TX 78669 Phone: 512-371-6159 | Fax: 512-351-8858 For terms and conditions of sales, please visit: Electrical Specification Note: All measurements were performed using the evaluation board in a free-space environment. Actual performance may vary depending on factors such as the ground plane, specific application, and surrounding environment. Mechanical Specification Environmental Specification Ordering Information Parameter Specification Unit Operating Frequency 2400 - 2500 MHz Return Loss ≤ -7.2 dB VSWR ≤ 2.5 :1 Polarization Linear - Peak Gain 2.8 dBi Minimum Total Efficiency -1.8 (66) dB (%) Average Total Efficiency -1.6 (70) dB (%) Maximum Total Efficiency -1.4 (72) dB (%) Impedance 50 Ω Radiation Pattern Omni-directional - Input Power ≤ 2.0 W Parameter Specification Antenna Dimension 1.0 x 0.5 x 0.4 mm Evaluation board Dimension 44 x 19 mm Recommended Ground Clearance for Antenna 4.6 x 3.5 mm Mounting Type Surface Mount Mounting Location PCB Edge Mounting Material(s) Ceramic Parameter Specification Operating and Storage Temperature (individual chip without packing) -40⁰C ~ +125⁰C Packaging Storage Temperature -10⁰C ~ +40⁰C Packaging Storage Relative Humidity 70% (Max.) Part Number Description AANI-CH-0070-Q Antenna Component on Cut Tape AANI-CH-0070-Q-T Antenna Component on Tape & Reel AANI-CH-0070-Q-EVB Evaluation Kit ABRACON IS ISO9001-2015 CERTIFIED REVISION I.R.: 12-18-24 www.abracon.com Automotive-Grade 2.4GHz Loop Chip Antenna AANI-CH-0070-Q 1.0 x 0.5 x 0.4 mm RoHS/RoHS II Compliant MSL Level = 1 Request Samples Check Inventory 5101 Hidden Creek Ln Spicewood TX 78669 Phone: 512-371-6159 | Fax: 512-351-8858 For terms and conditions of sales, please visit: Product Dimensions and Terminal Configuration Unit: mm ABRACON IS ISO9001-2015 CERTIFIED REVISION I.R.: 12-18-24 www.abracon.com Automotive-Grade 2.4GHz Loop Chip Antenna AANI-CH-0070-Q 1.0 x 0.5 x 0.4 mm RoHS/RoHS II Compliant MSL Level = 1 Request Samples Check Inventory 5101 Hidden Creek Ln Spicewood TX 78669 Phone: 512-371-6159 | Fax: 512-351-8858 For terms and conditions of sales, please visit: Recommended PCB layout If there are several layers in the PCB, there is an advantage to add vias for smooth interconnection of the ground areas to avoid splits in the ground plane. It is also important that the ground clearance is respected through all layers of the PCB. It is recommended to implement a matching network to optimize the antenna impedance in your application. Detailed view of the antenna footprint and ground clearance area: Unit: mm Transmission Line The transmission line should be kept as short as possible and be designed to have a characteristic impedance of 50Ω. Abracon recommends using a Co-Planar Waveguide with Ground (CPWG), which dimensions can be derived by any trusted calculator, using the correct input for PCB materials and layer stack-up. ABRACON IS ISO9001-2015 CERTIFIED REVISION I.R.: 12-18-24 www.abracon.com Automotive-Grade 2.4GHz Loop Chip Antenna AANI-CH-0070-Q 1.0 x 0.5 x 0.4 mm RoHS/RoHS II Compliant MSL Level = 1 Request Samples Check Inventory 5101 Hidden Creek Ln Spicewood TX 78669 Phone: 512-371-6159 | Fax: 512-351-8858 For terms and conditions of sales, please visit: Measurement Setup The radiation measurements were all done in an anechoic chamber with the antenna implemented on its evaluation board (Abracon AANI-CH-0070-Q-EVB) that has a PCB size of 44 x 19 mm: Reflection Characteristics – Return Loss ABRACON IS ISO9001-2015 CERTIFIED REVISION I.R.: 12-18-24 www.abracon.com Automotive-Grade 2.4GHz Loop Chip Antenna AANI-CH-0070-Q 1.0 x 0.5 x 0.4 mm RoHS/RoHS II Compliant MSL Level = 1 Request Samples Check Inventory 5101 Hidden Creek Ln Spicewood TX 78669 Phone: 512-371-6159 | Fax: 512-351-8858 For terms and conditions of sales, please visit: Radiation Characteristics – Total Efficiency (dB) Radiation Characteristics – Total Efficiency (%) ABRACON IS ISO9001-2015 CERTIFIED REVISION I.R.: 12-18-24 www.abracon.com Automotive-Grade 2.4GHz Loop Chip Antenna AANI-CH-0070-Q 1.0 x 0.5 x 0.4 mm RoHS/RoHS II Compliant MSL Level = 1 Request Samples Check Inventory 5101 Hidden Creek Ln Spicewood TX 78669 Phone: 512-371-6159 | Fax: 512-351-8858 For terms and conditions of sales, please visit: Radiation Characteristics – Maximum Gain Radiation Characteristics – 3D Pattern @ 2450 MHz Unit: dBi ABRACON IS ISO9001-2015 CERTIFIED REVISION I.R.: 12-18-24 www.abracon.com Automotive-Grade 2.4GHz Loop Chip Antenna AANI-CH-0070-Q 1.0 x 0.5 x 0.4 mm RoHS/RoHS II Compliant MSL Level = 1 Request Samples Check Inventory 5101 Hidden Creek Ln Spicewood TX 78669 Phone: 512-371-6159 | Fax: 512-351-8858 For terms and conditions of sales, please visit: Radiation Characteristics – 2D Pattern @ 2450 MHz XY-plane: YZ-plane: XZ-plane: VP: Vertical Polarization HP: Horizontal Pol…

Text truncated - open the document above for the full version.