2BXI5-T-638Remote-controlled car toy

INSTRUCTIONMANUAL FCCID:2BXI5-T-638 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. FCC Radiation Exposure statement The device has been evaluatec to meel general RF exposure requirement. The device can be used in portable exposure condition without restriction.

TCB CALL página 1 File FCC ID: 2BXI5-T-638 Please upload an exhibit that explains how does the TCB verify the new agent information: 1- Is the address of the agent a valid physical US mailing address (not a US post office box, not a virtual mailbox, not P.O. Boxes, not a vacant lot, not a public building, etc.) ○ We have checked if the address exists in a real and potential building (Google maps) + official US register, after this verification and the evidence below we can guarantee the following: not a US post office box not a virtual mailbox not P.O. Boxes not a vacant lot not a public building(note) ► We checked the FCC FRN Search based on the information provided by the grantee. On the official register from : Search | California Secretary of State TCB CALL página 2 TCB CALL página 3 TCB CALL página 4 TCB CALL página 5 TCB CALL página 6 TCB CALL página 7 TCB CALL página 8 ► CONCLUSION by TCB: The ASOP defined and provided by grantee is VALID and confirmed. Therefore the exhibit "C5266091_X23_Ed1_US_Agent_Letter" included in the file is ok. 2- Is the agent physically located at that valid US address such that the agent can be legally served at that address? Yes , check above 3- Has the listed agent clearly agreed in writing to serve as the agent for the grantee at that address? Yes, it is included in the exhibit "C5266091_X23_Ed1_US_Agent_Letter" >

1/1 US Agent for Service of Process LETTER OF ATTESTATION TO: Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 US Agent for Service of Process: Company Name: Herland International Trading Inc FRN: 0036324101 Contact Name: Jianfeng Gao Address: 1370 Valley Vista Dr Ste 200 Diamond Bar California 91765-3921 Telephone No: 001-909-772-1888 Email: [email protected] Applicant: Company name: YONG TE TOYS FACTORY Product Description: Remote-controlled car toy Grantee code: 2BXI5 FCC ID: 2BXI5-T-638 FRN: 0038739454 Contact Name: ZHE LI Address: CHENGHAI DISTRICT, SHANTOU CITY, GUANGDONG PROVINCE, CHINA. Telephone No: 13502721297 Email: [email protected] [YONG TE TOYS FACTORY] certifies that, as of the date of this filing of the application with the TCB, [Herland International Trading Inc] is our designated US agent for service of process for the above referenced FCC ID. [YONG TE TOYS FACTORY] accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any commission related proceeding involving equipment. [Herland International Trading Inc] accepts, as of the date of the filing of the application, the obligation of the designated US agent for service of process for the above reference FCC ID. The US Agent for Service of Process is aware of and agrees to comply with the requirements outlined in the FCC Equipment Authorization Program, Report and Order FCC 22-84, and clause § 2.911. The Applicant is aware of and agrees to comply with the requirements outlined in the FCC Equipment Authorization Program, Report and Order FCC 22-84, and clause § 2.911. Date: 2026/08/25 Applicant’s Name: ZHE LI US Agent’s Name: Jianfeng Gao Title: Manager Title: Manager Signature Signature

Attestation Statement. Old Code: C5266091 24 New Code: 00015544 Ed.3 Change reason: FRN is added to the Applicant information section. 1/1 YONG TE TOYS FACTORY TO: Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 The Commission adopted rules that prohibit equipment authorization for “covered” telecommunications equipment and video surveillance equipment produced by entities identified on the Commission’s Covered List 1 , which is periodically updated. See the Covered List for more details. This Attestation Statement is to confirm that we follow the Section 2.911(d)(5)(i)-(ii) Applicant Company name: YONG TE TOYS FACTORY Grantee code: 2BXI5 FCC ID: 2BXI5-T-638 FRN: 0038739454 Contact Name: ZHE LI Address: CHENGHAI DISTRICT, SHANTOU CITY, GUANGDONG PROVINCE, CHINA. Telephone No: 18906679427 Fax No: 18906679427 Email: [email protected] i. [YONG TE TOYS FACTORY] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. The applicant must sign this certification. ii. [YONG TE TOYS FACTORY] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant [is not] (as a specifically named entity or any of its subsidiaries or affiliates) identified on the Covered List as an entity producing “covered” equipment. The applicant must sign this certification. [YONG TE TOYS FACTORY] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant [is not] identified on the Covered List as an entity producing “covered” equipment . Date: 2026/08/25 Applicant’s Name: ZHE LI Title: Manager Signature: The Commission’s Covered List is published by the Public Safety and Homeland Security Bureau and posted on the Commission’s website. This Covered List, which is periodically updated, identifies particular equipment, produced by particular entities, that constitutes “covered” equipment. https://www.fcc.gov/supplychain/coveredlist

YONG TE TOYS FACTORY Code 00018768 Ed. 1 Item 1. The device is able to install software/program installation? ☐ Yes, go to Item 2. ☒ No. In this case, the rest of the items do not apply. The device cannot support installation of Kaspersky cybersecurity or anti-virus software. Item 2. Technical Requirements for Kaspersky Cybersecurity Software: # General Requirements (For all Devices) Yes / No or N/A Comments 1 Internet connection for activation and updates (For all Operating Systems) N/A Device Remote-controlled car toy Company name YONG TE TOYS FACTORY Grantee code 2BXI5 FCC ID 2BXI5-T-638 FRN 0038739454 Contact name ZHE LI Address CHENGHAI DISTRICT, SHANTOU CITY, GUANGDONG PROVINCE, CHINA. Telephone number 13502721297 E-mail [email protected] Chipset/module information TX-2A Operating System (if applicable) N/A Storage Capacity (hard drive or other permanent memory storage, if applicable) N/A 2 # General Requirements (For Windows Devices) Yes / No or N/A Comments 1 Storage: 1500 MB free space on the hard drive N/A 2 Operating System: Microsoft Windows 8, 8.1, 10 & 11 Home / Pro / Enterprise Microsoft Windows 7 Starter / Home Basic & Premium / Professional / Ultimate SP1 or higher N/A 3 Processor: 1 GHz or higher (x86 or x64) N/A 4 Memory (RAM)1 GB (32-bit) or 2 GB (64-bit) N/A 5 Screen Resolution: Minimum resolution of 1024 x 768 N/A # General Requirements (For macOS devices) Yes / No or N/A Comments 1 Operating System macOS® 13 – 14 N/A 2 Memory (RAM)4 GB N/A 3 Storage: 3455 MB free space on the hard drive N/A # General Requirements (For Android Devices) Yes / No or N/A Comments 1 Storage: 150 MB free space N/A 2 Operating System: Android™ 10 – 14 N/A 3 Screen Resolution: Minimum resolution of 320 x 480 N/A # General Requirements (for iOS devices) Yes / No or N/A Comments 1 Storage: 150 MB free space N/A 2 Operating System: iOS® 17 N/A # General Requirements (For Linux system) Yes / No or N/A Comments 3 1 Hard drive: 1 GB of free space N/A 2 CPU: Intel Pentium 1 GHz or higher N/A 3 RAM: 1 GB N/A 4 Minimum software requirements: AlmaLinux OS 8 or later; AlterOS 7.5 or later; Astra Linux Common Edition 2.12 or later; CentOS 6.7 or later; Debian GNU/Linux 10.0 or later; EulerOS 2.0 or later; Oracle Linux 7.3 or later ; Red Hat Enterprise Linux 6.7 or later ; Rocky Linux 8.5 or later ; SUSE Linux Enterprise Server 12.5 or later; Ubuntu 12.04 or later ; Uncom OS Home / Business / Education / Enterprise 2.2 or later; ALT Linux Workstaton / Workstation K / Server / Education 8 or later; ROSA Linux Workstation / Server 12 or later ; RED OS 7.3 and later ; N/A After reviewed the technical requirements, is the device capable of supporting the installation of Kaspersky software? ☐ Yes, go to Item 3. ☒ No. In this case, the rest of the items do not apply. The device cannot support installation of Kaspersky software Item 3. Connectivity Capabilities: 4 # Physical Interface Purpose Justification 1 1 # Wireless Interface Purpose Justification 1 1 After the review of this items, the device: ☒ Cannot support installation of any cybersecurity or anti-virus software on the covered list. ☐ Potentially can operate with any cybersecurity or anti-virus software on the covered list – additional third- party proof is provided to demonstrate compliance with requirements as of 2.911(d)5(i),(ii) – “Proof of Compliance with Covered List Software Requirements” of this document applies Signature: Name: ZHE LI Date:2026-08-25 1 The justification field is used to justify why the software cannot be received through that interface. Check the annex for more indications.

YONG TE TOYS FACTORY Product Similarity Declaration FCC ID: 2BXI5-T-638 Applicant: YONG TE TOYS FACTORY Address: CHENGHAI DISTRICT, SHANTOU CITY, GUANGDONG PROVINCE, CHINA. Manufacturer: YONG TE TOYS FACTORY Address: CHENGHAI DISTRICT, SHANTOU CITY, GUANGDONG PROVINCE, CHINA. Product Name: Remote-controlled car toy Trade Mark: N/A Model Number: T-638, T-637, T-636, T-639 We (YONG TE TOYS FACTORY) hereby state that all the models are electrical identical including the same software parameter and hardware design (i.e., circuit design, PCB Layout, RF module/circuit, antenna type(s) and antenna location, components on PCB, etc.,), same mechanical structure and design (including product enclosure, materials, etc.,), All models are the same as the samples except model name and appearance color. Applicant Signature: Printed Name: ZHE LI Title:Manager Address: CHENGHAI DISTRICT, SHANTOU CITY, GUANGDONG PROVINCE, CHINA. Tel.: 13502721297 Email: [email protected]

C5266091_X10_Ed.2 1/1 YONG TE TOYS FACTORY Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Date: 2026.08.25 Subject: Request for Confidentiality FCC ID: 2BXI5-T-638 To Whom It May Concern, Pursuant to the provisions of Sections 0.457 and 0.459 of Commission's rules (47CFR0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure. Exhibits Long-Term Confidentiality Short-Term Confidentiality NOTE 2 ID Label/Location No No Attestation Statement No No External Photos No ☐ Block Diagram ☒ ☐ Schematics ☒ ☐ Test Report No No Test Setup Photos No ☐ User’s Manual ☐ NOTE 1 ☐ Internal Photos ☐ NOTE 1 ☐ Parts List / Tune Up ☐ ☐ RF Exposure Info No No Operational Description ☒ ☐ Cover Letter(s) No No SDR Software / Security Info ☐ No NOTE 1: Long-Term Confidentiality may be permitted under special conditions (See II. LONG-TERM CONFIDENTIALITY, Section 3 of KDB 726920, use last in force) NOTE 2: Short-Term Confidentiality can be requested for a maximum of 180 days from the date of the grant. Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In case of short-term Confidentiality, the applicant requests the exhibits selected above are withheld from public view for a period of ______ days from the date of the Grant of Equipment Authorization and prior to marketing. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Sincerely, C5266091_X10_Ed.2 1/1 Signature: Name: ZHE LI Title: Manager 2026.08. 25

C5266091_X8_Ed.1 1/1 Letter of Authorization YONG TE TOYS FACTORY Company: YONG TE TOYS FACTORY Address: CHENGHAI DISTRICT, SHANTOU CITY, GUANGDONG PROVINCE, CHINA. Product Name: Remote-controlled car toy Model Number: T-638, T-637, T-636, T-639 FCC Identifier: 2BXI5-T-638 We authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, to act on our behalf on all matters concerning the above named equipment. Any individual within LGAI Technological Center S.A. is authorized to act on our behalf and take action on the application. We declare that authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by LGAI Technological Center S.A. on our behalf shall have the same effect as acts of our own. Name: ZHE LI Date: 2026.08.25 Title: Manager Signature of applicant:

Shenzhen DL Testing Technology Co., Ltd. FCC ID: 2BXI5-T-638 EUT PHOTO(External Photos) Shenzhen DL Testing Technology Co., Ltd. FCC ID: 2BXI5-T-638 Shenzhen DL Testing Technology Co., Ltd. FCC ID: 2BXI5-T-638 Shenzhen DL Testing Technology Co., Ltd. FCC ID: 2BXI5-T-638 ※※※※※ END OF REPORT ※※※※※

Size: 12*6mm Model: T-638 FCC ID: 2BXI5-T-638 Label location

Shenzhen DL Testing Technology Co., Ltd. FCC ID: 2BXI5-T-638 EUT PHOTO(Internal Photos) ANT Shenzhen DL Testing Technology Co., Ltd. FCC ID: 2BXI5-T-638 Shenzhen DL Testing Technology Co., Ltd. FCC ID: 2BXI5-T-638 ※※※※※ END OF REPORT ※※※※※

FCC ID:2BXI5-T-638 RF Exposure Evaluation According to KDB 447498 D01 V06 and part 2.1093，Unless specifically required by the published RF exposure KDB procedures, standalone 1-g head or body and 10-g extremity SAR evaluation for general population exposure conditions, by measurement or numerical simulation, is not required when the corresponding SAR Test Exclusion Threshold condition(s), listed below, is (are) satisfied. For frequencies below 100 MHz, the following may be considered for SAR test exclusion (also illustrated in Appendix C): 33 1) For test separation distances > 50 mm and<}200 mm, the power threshold at the corresponding test separation distance at 100 MHz in step b) is multiplied by [1 + log(100/f (MHz) ] 2)For test separation distances < 50 mm, the power threshold determined by the equation in c) 1) for 50 mm and 100 MHz is multiplied by ½ 3)SAR measurement procedures are not established below 100 MHz. For 100 MHz to 6 GHz and test separation distances ≤ 50 mm, the 1-g and 10-g SAR test exclusion thresholds are determined by the following: [(max. power of channel, including tune-up tolerance, Mw) / (min. test separation distance, mm)] · [√f (GHz) ] ≤ 3.0 for 1-g SAR, and ≤ 7.5 for 10-g extremity SAR, where f (GHz) is the RF channel transmit frequency in GHz Power and distance are rounded to the nearest Mw and mm before calculation The result is rounded to one decimal place for comparison EIRP=E Meas +20log(d Meas )-104.7 EIRP is the equivalent isotropically radiated power, in dBm E Meas is the field strength of the emission at the measurement distance, in dBμV/m d Meas is the measurement distance, in m Here, Field strength (dBuV/m) EIRP (dBm) Frequency (MHz) Min. distance(mm) Max tune-up (mW) Limit (mW) 61.65 -33.51 49.86 5 0.00045 308 So a SAR test is not required

Shenzhen DL Testing Technology Co., Ltd. Report No.: DLE-260730037R Test Report Tel: 400-688-3552 Web:www.dl-cert.com Email: [email protected] Page 1 of 19 FCC Part 15C Test Report FCC ID: 2BXI5-T-638 Applicant: YONG TE TOYS FACTORY Address: CHENGHAI DISTRICT, SHANTOU CITY, GUANGDONG PROVINCE, CHINA. Manufacturer: YONG TE TOYS FACTORY Address: CHENGHAI DISTRICT, SHANTOU CITY, GUANGDONG PROVINCE, CHINA. Product Name: Remote-controlled car toy Trade Mark: N/A Model Number: T-638, T-637, T-636, T-639 Date of Receipt: Jul. 30, 2026 Test Date: Jul. 30, 2026 – Aug. 13, 2026 Date of Report: Aug. 13, 2026 Prepared By: Shenzhen DL Testing Technology Co., Ltd. Address: 101-201, Comprehensive Building, Tongzhou Electronics Longgang Factory Area, No.1 Baolong Fifth Road, Baolong Community, Baolong Street, Longgang District, Shenzhen, China Applicable Standards: FCC CFR47 Part 15 Section 15.235 ANSI C63.10-2020+Cor.1-2023+C63.10a-2024+Errata to C63.10a-2024 Test Result: Pass Report Number: DLE-260730037R Prepared (Test Engineer): Alisa Song Reviewer (Supervisor): Jack Bu Approved (Manager): Jade Yang This test report is based on a single evaluation of one sample of above mentioned products. It is not permitted to be duplicated in extracts without written approval of Shenzhen DL Testing Technology Co., Ltd. Shenzhen DL Testing Technology Co., Ltd. Report No.: DLE-260730037R Test Report Tel: 400-688-3552 Web:www.dl-cert.com Email: [email protected] Page 2 of 19 Table of Contents Page 1 . SUMMARY OF TEST RESULTS 3 1.1 MEASUREMENT UNCERTAINTY 3 2 . GENERAL INFORMATION 4 2.1 GENERAL DESCRIPTION OF EUT 4 2.2 DESCRIPTION OF TEST MODES 4 2.3 BLOCK DIGRAM SHOWING THE CONFIGURATION OF SYSTEM TESTED 5 2.4 DESCRIPTION OF SUPPORT UNITS(CONDUCTED MODE) 5 2.5 TABLE OF PARAMETERS OF TEST SOFTWARE SETTING 5 2.6 EQUIPMENTS LIST FOR ALL TEST ITEMS 6 3 . EMC EMISSION TEST 7 3.1 CONDUCTED EMISSION MEASUREMENT 7 3.1.1 POWER LINE CONDUCTED EMISSION LIMITS 7 3.1.2 TEST PROCEDURE 7 3.1.3 DEVIATION FROM TEST STANDARD 7 3.1.4 TEST SETUP 8 3.1.5 EUT OPERATING CONDITIONS 8 3.1.6 TEST RESULTS 8 3.2 RADIATED EMISSION MEASUREMENT 9 3.2.1 RADIATED EMISSION LIMITS 9 3.2.2 TEST PROCEDURE 9 3.2.3 DEVIATION FROM TEST STANDARD 10 3.2.4 TEST SETUP 10 3.2.5 EUT OPERATING CONDITIONS 10 3.2.6 TEST RESULTS (BETWEEN 9KHZ – 30 MHZ) 11 3.2.7 TEST RESULTS (BETWEEN 30MHZ – 1GHZ) 12 4 . BANDWIDTH TEST 15 4.1 APPLIED PROCEDURES / LIMIT 15 4.1.1 TEST PROCEDURE 15 4.1.2 DEVIATION FROM STANDARD 15 4.1.3 TEST SETUP 15 4.1.4 EUT OPERATION CONDITIONS 15 4.1.5 TEST RESULTS 16 5 . CALCULATION OF AVERAGE FACTOR 17 5.1 APPLIED PROCEDURES / LIMIT 17 5.1.1 TEST PROCEDURE 17 5.1.2 TEST SETUP 17 5.1.3 EUT OPERATION CONDITIONS 17 5.1.4 TEST RESULTS 18 6 . ANTENNA REQUIREMENT 19 6.1 STANDARD REQUIREMENT 19 6.2 EUT ANTENNA 19 7 . TEST SETUP PHOTO 19 8 . EUT PHOTO 19 Shenzhen DL Testing Technology Co., Ltd. Report No.: DLE-260730037R Test Report Tel: 400-688-3552 Web:www.dl-cert.com Email: [email protected] Page 3 of 19 1. SUMMARY OF TEST RESULTS Test procedures according to the technical standards: FCC Part15 (15.227) , Subpart C Standard Section Test Item Judgment Remark 15.207 Conducted Emission N/A 15.205(a), 15.209 15.235(a) Fundamental &Radiated Spurious Emission Measurement PASS 15.235(b)15.215(c) Bandwidth PASS 15.203 Antenna Requirement PASS NOTE: (1)” N/A” denotes test is not applicable in this Test Report Test lab: Shenzhen DL Testing Technology Co., Ltd. Address: 101-201, Comprehensive Building, Tongzhou Electronics Longgang Factory Area, No.1 Baolong Fifth Road, Baolong Community, Baolong Street, Longgang District, Shenzhen, China FCC Test Firm Registration Number: 854456 Designation Number: CN1307 IC Registered No.: 27485 CAB ID.: CN0118 1.1 MEASUREMENT UNCERTAINTY The reported uncertainty of measurement y ± U, where expended uncertainty U is based on a standard uncertainty multiplied by a coverage factor of k=2,providing a level of confidence of approximately 95 %. No. Item Uncertainty 1 Conducted Emission Test ±2.56dB 2 RF power,conducted ±0.42dB 3 Spurious emissions,conducted ±2.76dB 4 All emissions,radiated(<1G) ±3.65dB 5 All emissions,radiated(>1G) ±4.89dB 6 Temperature ±0.5°C 7 Humidity ±2% 8 Bandwidth ±0.2MHz Shenzhen DL Testing Technology Co., Ltd. Report No.: DLE-260730037R Test Report Tel: 400-688-3552 Web:www.dl-cert.com Email: [email protected] Page 4 of 19 2. GENERAL INFORMATION 2.1 GENERAL DESCRIPTION OF EUT Product Name: Remote-controlled car toy Trade Mark: N/A Model No.: T-638, T-637, T-636, T-639 Test Mode: T-638 Model Difference All models are same as the samples except model name and appearance color, they have the same structure and circuit. Operation Frequency: 49.86MHz Channel numbers: 1 Channels Modulation technology: FSK Antenna Type: integrate antenna Antenna gain: 3 dBi Power supply: DC 3V (1.5V battery*2) Note: 1.For a more detailed features description, please refer to the manufacturer’s specifications or the User's Manual. 2.The EUT’s all information provided by client. 2.2 DESCRIPTION OF TEST MODES Note: (1) New battery is used during the test To investigate the maximum EMI emission characteristics generates from EUT, the test system was pre-scanning tested base on the consideration of following EUT operation mode or test configuration mode which possible have effect on EMI emission level. Each of these EUT operation mode(s) or test configuration mode(s) mentioned above was evaluated respectively. Pretest Mode Description Mode 1 TX Mode For Conducted & Radiated Emission Final Test Mode Description Mode 1 TX Mode Shenzhen DL Testing Technology Co., Ltd. Report No.: DLE-260730037R Test Report Tel: 400-688-3552 Web:www.dl-cert.com Email: [email protected] Page 5 of 19 2.3 BLOCK DIGRAM SHOWING THE CONFIGURATION OF SYSTEM TESTED Radiated Spurious Emission Test 2.4 DESCRIPTION OF SUPPORT UNITS(CONDUCTED MODE) The EUT has been tested as an independent unit together with other necessary accessories or support units. The …

Text truncated - open the document above for the full version.

天线产品规格书 PRODUCT SPECIFICATION 1、产品技术指标(PRODUCT TECHNICAL SPECIFICATION) 电性能指标Electrical Specifications 频率范围Frequency Range (MHz) 频带宽度Bandwidth (MHz 49.700MHz-49.900MHz ) 50 输入阻抗Input Impendence (Ω) 50 电压驻波比V.S.W.R ≤2 增益Gain (dBi) 3dB i 极化形式Polarization Type 垂直Vertical 雷电保护Lightning Protection 交流接地AcGround 功率容量Power Capacity (w) 0.5 机械指标Mechanical Specifications 天线长度Antenna Length (mm) Ø4.0 X 20CM 辐射体Radiator 钢CS 连接器型号Connect Type 直接焊接Direct Welment 工作温度Working Temp(°C)- 40~65 储藏温度Storage Temperature(°C)- 40~80 颜色Color 黑色BLACK 重量Weight (g)0.6.7g(20cm长long) Manufacturer:YONG TE TOYS FACTORY Address:CHENGHAI DISTRICT, SHANTOU CITY, GUANGDONG PROVINCE, CHINA. 产品简介(Product introduction) 该天线是专为无线遥控设计生产的，天线具有性价比高，结构小巧， 生产方便的优点。 Thisantennaisdesignedandproducedspecificallyforwirelessremotecontrol,withtheadvantagesofhigh cost-effectiveness,compactstructure,andconvenientproduction 2、产品图片(PRODUCT PICTURE)

Shenzhen DL Testing Technology Co., Ltd. FCC ID: 2BXI5-T-638 EUT TEST PHOTO Radiated Measurement Photos Shenzhen DL Testing Technology Co., Ltd. FCC ID: 2BXI5-T-638 RF conducted test ※※※※※ END OF REPORT ※※※※※