2BXLH-APB50001-S5000mAh Semi-Solid Aluminum Alloy Power Bank

4. Responsible Product Disposal (E-Waste & Magnets) 9. Charging Guide & Common Issues 8. Fault Diagnosis and Privacy Protection 7. How To Use Q: Why does my phone feel warm to the touch? A: Due to the loss of conversion circuit efficiency, heat generation during magnetic charging is normal. Aluminum housings have better heat dissipation, so they feel hotter to the touch than plastic housings. Q: Why is my power bank providing fewer charges than expected? A: Due to a 35% to 45% capacity loss from battery cell and circuit inefficiencies during charging, a fully charged 5000mAh Power Bank effectively provides about 2750mAh to 3250mAh of usable power to your devices. Q: Why does charging slow or stop after reaching 80%? A: Your iPhone may slow charging at 80% to protect the battery. This can happen if it gets too warm during charging as part of iOS 17's thermal control strategy. Charging will resume once the device cools down. Category Battery Capacity APB50001-S 5V/3A (20W Max) iPhone: Up to 15W AirPods (Wireless Case): Up to 5W Apple Watch: Up to 3W Compatible Output Power 5000mAh / 18.50Wh High-Nickel NMC Lithium-ion Shell Material Aviation-grade Aluminum Alloy 117g (4.12oz) 100mm × 68mm × 8mm (3.94 × 2.68 × 0.31) 5V/3A, 9V/2.22A(20W Max) What do the lights mean? The number shows how much battery is left. A flashing green arc next to it means it’s currently charging your device. If you see “100”, the power bank is full. If the screen is off, press the side button to wake it up. Having Trouble? Try These Steps: If charging is slow or keeps stopping: • Make sure your phone is centered on the magnetic spot. • T ake off very thick cases, or cases with card holders. • Use a faster wall charger (look for “QC 3.0” or “PD” on your plug). If the power bank won’t turn on or charge your phone: • Unplug everything and press the button to see if it wakes up. • Try a different USB-C cable. • Try a different wall plug. If it gets hot and stops charging: • This is a safety feature. Let it cool down in a less hot place, then try again. If it still doesn’t work normally, please contact us. About the Battery: It has a 5000mAh capacity and uses a high-efficiency lithium-ion (NMC) battery. 7.1 Understanding the Button & Indicators • To Start Charging: Briefly press the power button once. The LED display will turn on, and a green semicircle icon will appear next to the battery percentage, indicating it is ready to charge wirelessly. • To Turn Off: Quickly press the power button twice. The LED display will turn off, and the device enters standby mode. 7.2 Charging Your Devices 7.2.1 For iPhone (with MagSafe): • Press the button once to wake the power bank. • Center the back of your iPhone (12 or later) over the magnetic charging area. • The magnets will automatically align and snap into place. A charging notification will appear on your iPhone screen. 7.2.2 For AirPods (with wireless charging case): • Ensure the power bank is on (LED display is lit). • Place your AirPods charging case flat on the center of the charging area. • The status light on your AirPods case will indicate charging has begun. 7.2.3 For Apple Watch: • Press the button once to activate the power bank. • Align the back of your Apple Watch with the center of the circular magnetic charging pad. • The watch will magnetically attach and begin charging. 7.3 For Optimal Charging • Ensure your device is centered on the charging area for maximum efficiency. • For iPhones without a magnetic case, removing thick cases may improve alignment and charging speed. 6.1 Sleek & Portable Design Featuring an aviation-grade aluminum alloy shell with a refined shimmering finish, this power bank combines style with durability. Its ultra-slim profile— just 0.31 inches (8.1mm) thick and 121g (4.2oz) light—makes the 5000mAh capacity effortlessly portable in any pocket or bag. 6.2 Safe & Intelligent Charging Designed with ergonomic rounded corners, it integrates an exclusive Temperature Control Chip that actively monitors and manages heat during operation. This ensures both the device and your phone remain at a safe, optimal temperature throughout the charging process. 6.3 Strong Magnetic Attachment & Fast Wireless Charging Equipped with a powerful magnetic alignment system delivering up to 12N (2.7 lbs) of holding force, it securely attaches to your iPhone for seamless 15W MagSafe-compatible fast charging, with or without a magnetic case. Enjoy cable-free convenience anytime. 6.4 Ultra-Fast Wired Charging via USB-C The built-in USB-C port supports bi-directional PD 18W fast charging. It can be fully recharged in approximately 1.5 hours, and also serves as a high-speed wired charger for your phone when needed. 6.5 Built-in Power Display & Broad Compatibility The integrated LED digital display shows the remaining battery percentage at a glance, eliminating power anxiety during travel, work, or leisure. It is fully compatible with iPhone 12-16 series (and future models), both bare and with magnetic cases. 5. Safety Information 5.1 Keep Away from Children • Keep the device out of reach of infants and children to prevent accidental ingestion or other hazards. 5.2 Operating Environment • Use and store the device indoors, in a dry and well-ventilated area. Keep away from flammable, explosive, overheated, damp, or oily environments. 5.3 Non-Disassembly & Storage • Do not attempt to disassemble the device, as this may cause electric shock or injury. For long-term storage, keep the device in an environment between -20°C to 60°C (-4°F to 140°F). 5.4 Medical Device Interference • The magnets and electromagnetic fields may interfere with the operation of implanted medical devices (e.g., pacemakers, insulin pump personal medical devices (e.g., hearing aids). Maintain a safe distance. Consult your physician and the medical device manufacturer if you have concerns. 5.5 Charging Considerations • For optimal charging, ensure your phone case is less than 5mm thick and does not contain …

Text truncated - open the document above for the full version.

ATECH INNOVATION CORP. 2198 Oakdale Avenue, Suite 110, San Francisco, CA 94124 Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 2026/08/08 U.S. Agent Designation ATECH INNOVATION CORP. acknowledges their consent for the following contact located in the United States to act as their agent for service of process for the equipment for which authorization is sought (FCC ID: 2BXLH-APB50001-S): Name and company of U.S. agent: ATECH INNOVATION CORP. Physical U.S. address of agent: 2198 Oakdale Avenue, Suite 110, San Francisco, CA 94124 FRN of U.S. agent: 0038747952 Phone of U.S. agent: 415-341-9788 Email address of U.S. agent: [email protected] ATECH INNOVATION CORP. acknowledges their obligation to accept service of process on behalf of ATECH INNOVATION CORP. with the FRN [0038747952] accepts its obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. By signing this form, we confirm the above and that we are aware of the application requirements listed under § 2.911(d)(7). The information provided in this letter is based on the referenced rule parts of Title 47 of the CFR as well as KDB 986446 D01. An expiration date for this letter does not exist. In case the U.S. agent changes, the grantee is obligated to notify the FCC within 30 days via the granting TCB. An expiration date for this letter does not exist. Sincerely, Signature Joanna Cheung Manager ATECH INNOVATION CORP. Signature Joanna Cheung Manager ATECH INNOVATION CORP. 48_[mo del] US_Agent_2.911(d)(7) - U, V0 5

FCC ID: 2BXLH-APB50001-S External Photos of the EUT FCC ID: 2BXLH-APB50001-S FCC ID: 2BXLH-APB50001-S

Label and Location Size: L: 2.0cm*W: 0.5cm Label and Location FCC ID: 2BXLH-APB50001-S

FCC ID: 2BXLH-APB50001-S Internal Photos of the EUT FCC ID: 2BXLH-APB50001-S Loop Antenna FCC ID: 2BXLH-APB50001-S

Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn FCC RF Exposure Report Reference No. ..................... : FCC ID............................................. : CTA26070900102 2BXLH-APB50001-S Compiled by ( position+printed name+signature) . : File administrators Zoey Cao Supervised by ( position+printed name+signature) . : Project Engineer Ace Chai Approved by ( position+printed name+signature) . : RF Manager Eric Wang Date of issue .................................... : Jul. 22, 2026 Testing Laboratory Name .............. : Shenzhen CTA Testing Technology Co., Ltd. Address ............................................ : Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao‘an District, Shenzhen, China Applicant’s name ............................ : ATECH INNOVATION CORP. Address ............................................ : 2198 Oakdale Avenue, Suite 110, San Francisco, CA 94124 Test specification ........................... : FCC CFR 47 PART 1, § 1.1310 Standard ........................................... : KDB 680106 D01 Wireless Power Transfer v04 Shenzhen CTA Testing Technology Co., Ltd. All rights reserved. This publication may be reproduced in whole or in part for non-commercial purpses as long as the Shenzhen CTA Testing Technology Co., Ltd. is acknowledged as copyright owner and source of the material. Shenzhen CTA Testing Technology Co., Ltd. takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. Test item description ..................... : 5000mAh Semi-Solid Aluminum Alloy Power Bank Trade Mark ....................................... : ATECH Manufacturer .................................... : Zhongshan Yongjiu Electronic Technology Co., LTD Model/Type reference ...................... : APB50001-S Modulation Type ............................... : APB50001-C, APB50001-GG, APB50001, APB50002, APB50002-S, APB50002-DT, APB50003, APB50004, APB50005, APB50006 Operation Frequency ........................ : From 110KHz~205KHz Ratings ............................................. : Input: 5V 3A Battery: 3.7V 5000mAh 18.5Wh Wireless Output: 15W(Max) Result ............................................... : PASS Report No.: CTA26070900102 Page 2 of 14 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn T E S T R E P O R T Equipment under Test : 5000mAh Semi-Solid Aluminum Alloy Power Bank Model /Type : APB50001-S Listed Models : APB50001-C, APB50001-GG, APB50001, APB50002, APB50002-S, APB50002-DT, APB50003, APB50004, APB50005, APB50006 Model Difference : The PCB board, circuit, structure and internal of these models are the same, only model number and colour are different for these model. So the tests were performed on model APB50001-S and the test results for the main test model can cover the listed models. Applicant : ATECH INNOVATION CORP. Address : 2198 Oakdale Avenue, Suite 110, San Francisco, CA 94124 Manufacturer : Zhongshan Yongjiu Electronic Technology Co., LTD Address : 8th Floor of Building 7, 9th Floor of Building 7, 8th Floor of Building 8, and 9th Floor of Building 8, Plot 1, Futing Street, Banfu Town, Zhongshan City, China Test Result: PASS The test report merely corresponds to the test sample. It is not permitted to copy extracts of these test result without the written permission of the test laboratory. Report No.: CTA26070900102 Page 3 of 14 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn Contents 1 T E S T S T A N D A R D S ................................................... 4 2 S U M M A R Y .............................................................. 5 2.1 General Remarks 5 2.2 Product Description 5 2.3 Description of the test mode 5 2.4 Special Accessories 5 2.5 Modifications 5 3 T E S T E N V I R O N M E N T ................................................ 6 3.1 Address of the test laboratory 6 3.2 Test Facility 6 3.3 Statement of the measurement uncertainty 6 3.4 Equipments Used during the Test 7 4 T E S T L I M I T ............................................................ 7 4.1 Requirement 7 4.2 Test setup 9 4.3 Test Procedures 10 4.4 Equipment Approval Considerations of KDB 680106 D01v04 11 4.5 Test results 12 4.6 Conclusion 13 5 P H O T O G R A P H S O F T H E T E S T S E T U P ......................... 14 Report No.: CTA26070900102 Page 4 of 14 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn 1 T E S T S T A N D A R D S The tests were performed according to following standards: 680106 D01 Wireless Power Transfer v04: EQUIPMENT AUTHORIZATION OF WIRELESS POWER TRANSFER DEVICES. Report No.: CTA26070900102 Page 5 of 14 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn 2 S U M M A R Y 2.1 General Remarks Date of receipt of test sample : Jul. 09, 2026 Testing commenced on : Jul. 09, 2026 Testing concluded on : Jul. 22, 2026 2.2 Product Description Product Name: 5000mAh Semi-Solid Alu…

Text truncated - open the document above for the full version.

Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn FCC PART 15 SUBPART C TEST REPORT Report Reference No. ..................... : FCC ID............................................. : CTA26070900101 2BXLH-APB50001-S Compiled by ( position+printed name+signature) . : File administrators Zoey Cao Supervised by ( position+printed name+signature) . : Project Engineer Ace Chai Approved by ( position+printed name+signature) . : RF Manager Eric Wang Date of issue .................................... : Jul. 22, 2026 Testing Laboratory Name .............. : Shenzhen CTA Testing Technology Co., Ltd. Address............................................ : Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao‘an District, Shenzhen, China Applicant’s name ............................ : ATECH INNOVATION CORP. Address............................................ : 2198 Oakdale Avenue, Suite 110, San Francisco, CA 94124 Test specification ........................... : Standard ........................................... : FCC Rules and Regulations Part 15 Subpart C (Section 15.209), ANSI C63.10-2020+Cor. 1-2023+C63.10a-2024 + Errata to C63.10a- 2024 Shenzhen CTA Testing Technology Co., Ltd. All rights reserved. This publication may be reproduced in whole or in part for non-commercial purpses as long as the Shenzhen CTA Testing Technology Co., Ltd. is acknowledged as copyright owner and source of the material. Shenzhen CTA Testing Technology Co., Ltd. takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. Test item description ..................... : 5000mAh Semi-Solid Aluminum Alloy Power Bank Trade Mark ....................................... : ATECH Manufacturer .................................... : Zhongshan Yongjiu Electronic Technology Co., LTD Model/Type reference ...................... : APB50001-S Listed Models .................................. : APB50001-C, APB50001-GG, APB50001, APB50002, APB50002-S, APB50002-DT, APB50003, APB50004, APB50005, APB50006 Modulation Type ............................... : ASK Operation Frequency ........................ : From 110KHz~205KHz Ratings ............................................. : Input: 5V 3A Battery: 3.7V 5000mAh 18.5Wh Wireless Output: 15W(Max) Result ............................................... : PASS Report No.: CTA26070900101 Page 2 of 25 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn T E S T R E P O R T Equipment under Test : 5000mAh Semi-Solid Aluminum Alloy Power Bank Model /Type : APB50001-S Listed Models : APB50001-C, APB50001-GG, APB50001, APB50002, APB50002-S, APB50002-DT, APB50003, APB50004, APB50005, APB50006 Model Difference : The PCB board, circuit, structure and internal of these models are the same, only model number and colour are different for these model. So the tests were performed on model APB50001-S and the test results for the main test model can cover the listed models. Applicant : ATECH INNOVATION CORP. Address : 2198 Oakdale Avenue, Suite 110, San Francisco, CA 94124 Manufacturer : Zhongshan Yongjiu Electronic Technology Co., LTD Address : 8th Floor of Building 7, 9th Floor of Building 7, 8th Floor of Building 8, and 9th Floor of Building 8, Plot 1, Futing Street, Banfu Town, Zhongshan City, China Test Result: PASS The test report merely corresponds to the test sample. It is not permitted to copy extracts of these test result without the written permission of the test laboratory. Report No.: CTA26070900101 Page 3 of 25 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn Contents 1 T E S T S T A N D A R D S .................................................................. 4 2 S U M M A R Y ............................................................................. 5 2.1 General Remarks 5 2.2 Product Description 5 2.3 Description of the test mode 5 2.4 Special Accessories 5 2.5 Modifications 5 3 T E S T E N V I R O N M E N T ............................................................... 6 3.1 Address of the test laboratory 6 3.2 Test Facility 6 3.3 Environmental conditions 6 3.4 Summary of measurement results 7 3.5 Statement of the measurement uncertainty 7 3.6 Equipments Used during the Test 8 4 T E S T C O N D I T I O N S A N D R E S U L T S ............................................ 10 4.1 AC Power Conducted Emission 10 4.2 Radiated Emission 13 4.3 The 20dB bandwidth 17 4.4 Antenna Requirement 18 5 T E S T S E T U P P H O T O S O F T H E E U T .......................................... 19 6 PH O T O S O F T H E E U T ............................................................. 20 Report No.: CTA26070900101 Page 4 of 25 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn 1 T E S T S T A N D A R D S The tests were performed according to following standards: FCC Rules and Regulations Part 15 Subpart C (Section 15.207): Conducted limits. FCC Rules and Regulations Part 15 Subpart C (Section 15.209): Radiated emission limits; general requirements. ANSI C63.10-2020+Cor. 1-2023+C63.10a-2024 + Errata to C63.10a-2024: America…

Text truncated - open the document above for the full version.

1. Antenna Description: Antenna type Loop coil antenna Model APB50001-S Frequency range 110KHz - 205KHz Manufacturer ATECH INNOVATION CORP. Address 2198 Oakdale Avenue, Suite 110, San Francisco, CA 94124 ANT Peak Gain 0.12 dBi 2. Antenna Photo: We statement that All measurements were performed radiated and therefore additional antenna gain documentation is not required.

FCC ID: 2BXLH-APB50001-S Test Setup Photos of the EUT