2BXML-GSP023D GALAXY Projector

叩MiMENT ct tru 部 0” 跻 4 - g 翌 g User Manual Please read this manual carefully before using the product and keep it for future reference. Customer Support: [email protected] 肘��目=1j值I�讨似，I坟心沁(:J Read all instructions before use and keep them for future reference. 1. For indoor use only. 2. Operating temperature: 0--40 ° C (32-104 ° F). 3. Keep away from water, moisture, and heat sources. 4. Keep away from open flames. 5. Place the product on a stable, flat surface. 6. Keep the ventilation openings unobstructed. Do not cover the product during operation and leave at least 10 cm (4 in) of clearance around it. 7. Use only the supplied power adapter and cable. 8. Do not use the product, adapter, or cable if it is damaged. 9. Disconnect the power before cleaning. Clean with a dry or lightly damp cloth; do not use solvents or abrasives. 10. Unplug the product when it will not be used for an extended period. 11. Do not disassemble, modify, or repair the product. 12. Do not look directly into the light source or lens while the product is operating. 13. This product is not a toy. Adult setup and supervision are required; keep packaging and small parts away from children. It� 对付沁玑讨I D Galaxy Projector @ oo ` 殴 / @ @HO- 叩MIMENT 回Remote 因UserManual 2 日PowerCable - IR Receiver Power Button Home Power Back Loop Bright Volume- ..VM;MENT Sleep Settings OK Favorite Volume+ Lens Air Inlet IR Receiver 3 Wheel 问可叹平呻 ＠ 团 _ 一二勹 Connect the power adapter to the projector, then plug it into a wall outlet. ® Rotate the Focus Wheel until the image is sharp and clear. ＠ Use the「emoteto select and play content ＠ 旯 Press the power button to tum on the Galaxy Projector. ＠ Adjust the stand angle as needed. Press and hold the power button to turn it off. 4 卜廿l:(tllit阿�,�问怍平i��� 刊，�J汛＊旧：l心�IMcJ【吩屈嘈�,�ri�1�1�=t�ri� �ceJ =1 N6 英文说明 书 风情折页95*133 175G双铜彩 印 mm , Item Specifications Brand Rovmiment Model Name GSP02 Dimensions 220 x 116 x 116 mm Voltage AC 100--240V, 50/60Hz Material ABS+PC Speaker Built-in 5W Light Source LED Projection Area 100"-300" diagonal (scales with distance); -250" at 2.5 m Projection Distance 1-3 m (3.3-9 8 ft); best at ~2 5 m (8 2 ft) Timer 30/60/90 min Resolution 720P Remote IR remote (included) Connectivity Wi-Fi 2.4 GHz Problem Possible Cause Solution Image is blur,y Focus is not adjusted correctly Slowly tum the Focus Wheel until the image appears clear and sharp Projection is too dim 即ghtnesslevel is set too low Increase the brightness using the remote control. No sound Volume is too low or muted Increase the volume using the remote control. Remote control does not work Battery is depleted or signal Replace the batteries and point the is blocked remote directly at the IR Receiver. Device turns off automatically Timer function is enabled Cause Sleep / auto-off timer is enabled / Solution Open Settings and tum off the Sleep timer or auto-off if not needed Light flickers Prmer connection is loose Ensure the power adapter is securely connected Device becomes hot Ventilation is blocked Keep ventilation openings clear and allow adequate airflow. Buttons do not respond Temporary system error Disconnect power for 30 seconds and restart the device 1.Clean the projection lens gently with a soft, lint-free cloth. 2.Do not touch the lens directly with your fingers. 3. Keep the ventilation openings free from dust and obstruction 4.Disconnect the power supply before cleaning. 5. Do not use water, alcohol, or chemical cleaners on the product. 6. Store the product in a cool, dry place when not in use. l-1ti,I咐I叫｀ ｀ ＂ FCC Compliance This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, inclu ding interference that may cause undesired operation.NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cau se harmful interference to radio communications. KA uc MADE IN CHINA 芯 CE:旦冗凸 5 6 7 l-1ti,I咐I叫｀ ｀ ＂ However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. RF Exposure Statement To maintain compliance with FCC'S RF Exposure guidelines, This equipment should be installed and operated with minimum 20cm between the radiator and your body. This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter.

Rev 6/05/2026 Shenzhen Juku Intelligent Technology Co., Ltd. Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 08-14-2026 Ref: Attestation Statements Part 2.911(d)(5)(i) Filing FCC ID: 2BXML-GSP02 [Shenzhen Juku Intelligent Technology Co., Ltd.] certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. [Shenzhen Juku Intelligent Technology Co., Ltd.] certifies that the equipment for which authorization is sought does not include cybersecurity or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors and assignees, including equipment with integrated Kaspersky Lab, Inc. (or any of its successors and assignees) cybersecurity or anti-virus software pursuant to DA-24-886 and KDB 986446 D01 Covered Equipment Guidance section B(2a). Device is inherently compliant based on hardware limitations or software controls. or A Software Bill of Materials (SBOM) is provided to the TCB for review, and The end-user or third parties cannot install additional software on this device. Sincerely, (Applicant signature) (Applicant printed name) Chen Fei Rev 6/05/2026 Shenzhen Juku Intelligent Technology Co., Ltd. Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 08-14-2026 Ref: Attestation Statements Part 2.911(d)(5)(ii) Filing FCC ID: 2BXML-GSP02 [Shenzhen Juku Intelligent Technology Co., Ltd.] certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Sincerely, (Applicant signature) (Applicant printed name) Chen Fei

Shenzhen Juku Intelligent Technology Co., Ltd. U.S. Agent Letter of Attestation To: Federal Communications Commission 7435 Oakland Mills Road, Columbia, MD 21046, USA Date: August 14, 2026 Ref: Attestation Statement – Part 2.911(d)(7) filing FCC ID: 2BXML-GSP02 Shenzhen Juku Intelligent Technology Co., Ltd. (“the applicant”) certifies that, as of the date of the filing of the application, CLF Import and Export Limited (“the agent”) is our designated U.S. agent for service of process for the above reference FCC ID. The applicant accepts to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. The applicant further acknowledges it is our responsibility to inform the FCC whenever the agent information changes. CLF Import and Export Limited ("the agent) understand it is the agent's obligation to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and email address. Designated U.S. Agent Company Name: CLF Import and Export Limited FRN: 0033489683 Address: 1312 17th Street #692, Denver, CO 80202, United States Signature: Contact Person: David Chen Tel: +1 949 254 2565 Email: [email protected] Applicant Company Name: Shenzhen Juku Intelligent Technology Co., Ltd. FRN: 0038762472 Address: Room 708, Block 6, Tian'an Cloud Park, No. 22, Xuegangbei Road, Longgang, ShenZhen, China Signature: Contact Person: Chen Fei Tel: +8615768146912 Email: [email protected]

Shenzhen Juku Intelligent Technology Co., Ltd. Date: August 14, 2026 Product Model Number: GSP02, GSP01, GSP02-PRO, GSP03, GSP04, GSP05 FCC ID: 2BXML-GSP02 To whom it may concern, Re: Product Certification Representative Authorization Letter We authorize QAI Laboratories Ltd. 3980 North Fraser Way, Burnaby B.C. Canada V5J 5K5 to act on our behalf on all matters concerning the above named equipment. This shall include the following:  Testing  Approval applications and procedures We declare that QAI Laboratories Ltd. is allowed to forward all information related to the approval project to the applied certification body and to the notification entities and to discuss any issues concerning the approval application. Any and all acts carried out by QAI Laboratories Ltd. on our behalf shall have the same effect as acts of our own. By: Chen Fei Contact Listed on FCC Wesbite Title: Manager Email: [email protected] Telephone: +8615768146912 On behalf of: Shenzhen Juku Intelligent Technology Co., Ltd.

Shenzhen Juku Intelligent Technology Co., Ltd. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: August 14, 2026 Subject; Request for Confidentiality FCC ID: 2BXML-GSP02 To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure Software Security Requirements for UNII devices It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: Chen Fei Title: Manager

Shenzhen Juku Intelligent Technology Co., Ltd. Model Difference Statement DATE: August 14, 2026 FCC ID: 2BXML-GSP02 Dear Sir/Madam, Added models GSP01, GSP02-PRO, GSP03, GSP04, GSP05 basis of the original product GSP02. The color of appearance and model name of series models listed are different from the main model, but the circuit and the electronic construction are the same, declared by the manufacturer. Sincerely, Name: Chen Fei Title: Manager Company name: Shenzhen Juku Intelligent Technology Co., Ltd. Address: Room 708, Block 6, Tian'an Cloud Park, No. 22, Xuegangbei Road, Longgang, ShenZhen, China

Report No: SSP26070183-1 FCC ID: 2BXML-GSP02 Annex of Test Report Annex A. EUT External Photos Model: GSP02 EUT View 1 EUT View 2 Report No: SSP26070183-1 FCC ID: 2BXML-GSP02 Annex of Test Report EUT View 3 EUT View 4 Report No: SSP26070183-1 FCC ID: 2BXML-GSP02 Annex of Test Report EUT View 5 EUT View 6 Report No: SSP26070183-1 FCC ID: 2BXML-GSP02 Annex of Test Report EUT View 7 EUT View 8 Report No: SSP26070183-1 FCC ID: 2BXML-GSP02 Annex of Test Report EUT View 9

Report No: SSP26070183-1 FCC ID: 2BXML-GSP02 Annex of Test Report Annex D. Label and Inf ormation FCC Label Sample FCC Labe Size: 12cm *4cm FCC Label Specifications Text is Black in color and is justified. Labels are printed in indelible ink on permanent adhesive backing or silk-screened onto the EUT or shall be affixed at a conspicuous location on the EUT. Where the EUT is constructed in two or more sections connected by wires and marketed together, the above statement is required to be affixed only to the main control unit. When the EUT is so small or for such use that it is not practicable to place the statement on it, the above information shall be placed in a prominent location in the instruction manual or pamphlet supplied to the user or, alternatively, shall be placed on the container in which the device is marketed. FCC Label Location

Report No: SSP26070183-1 FCC ID: 2BXML-GSP02 Annex of Test Report Annex B. EUT Internal Photos Model: GSP02 EUT Internal View 1 EUT Internal View 2 Antenna interface Report No: SSP26070183-1 FCC ID: 2BXML-GSP02 Annex of Test Report EUT Internal View 3 EUT Internal View 4 WIFI ANT Report No: SSP26070183-1 FCC ID: 2BXML-GSP02 Annex of Test Report EUT Internal View 5 EUT Internal View 6 Report No: SSP26070183-1 FCC ID: 2BXML-GSP02 Annex of Test Report EUT Internal View 7 EUT Internal View 8

FCC ID: 2BXML-GSP02 RF Exposure Evaluation Limits The criteria listed in the following table shall be used to evaluate the environment impact of human exposure to radio frequency (RF) radiation as specified in 1.1307(b) Limits for Maximum Permissible Exposure (MPE) Frequency range (MHz) Electric field strength (V/m) Magnetic field strength (A/m) Power density (mW/cm 2 ) Averaging time (minutes) (A) Limits for Occupational/Controlled Exposures 0.3–3.0 614 1.63 *(100) 6 3.0–30 1842/f 4.89/f *(900/f 2 ) 6 30–300 61.4 0.163 1.0 6 300–1500 f/300 6 1500–100,000 5 6 (B) Limits for General Population/Uncontrolled Exposure 0.3–1.34 614 1.63 *(100) 30 1.34–30 824/f 2.19/f *(180/f 2 ) 30 30–300 27.5 0.073 0.2 30 300–1500 f/1500 30 1500–100,000 1.0 30 f = frequency in MHz, * = Plane-wave equivalent power density. Friis transmission formula: Pd = (Pout*G)/(4*pi*r 2 ) Where Pd = power density in mW/cm 2 , Pout = output power to antenna in mW; G = gain of antenna in linear scale, Pi = 3.1416; R = distance between observation point and center of the radiator in cm Pd id the limit of MPE, 1 mW/cm 2 . If we know the maximum gain of the antenna and the total power input to the antenna, through the calculation, we will know the distance r where the MPE limit is reached. Test Procedure Software provided by client enabled the EUT to transmit and receive data at lowest, middle and highest channel individually. Test Result of RF Exposure Evaluation For 2.4GWiFi Mode Output power to antenna (dBm) Tune-up Power(dBm) Max Tune-up Power(dBm) Output power to antenna (mW) Power Density at R=20cm (mW/cm2) Limit (mW/cm2) Result 802.11b 17.14 17(±1) 18 63.10 0.014 1.0 PASS Remark: antenna gain= 0.48dBi

Report No: SSP26070183-1 FCC Test Report Page 1 of 50 FCC TEST REPORT FCC ID: 2BXML-GSP02 Report No. : SSP26070183-1 Applicant : Shenzhen Juku Intelligent Technology Co., Ltd. Product Name : 3D GALAXY Projector Model Name : GSP02 Test Standard : FCC Part 15.247 Date of Issue : 2026-08-10 Shenzhen CCUT Quality Technology Co., Ltd. 1F, Building 35, Changxing Technology Industrial Park, Yutang Street, Guangming District, Shenzhen, Guangdong, China; (Tel.:+86-755-23406590 website: www.zrlklab.com) This test report is limited to the above client company and the product model only. It may not be duplicated without prior permitted by Shenzhen CCUT Quality Technology Co., Ltd. Report No: SSP26070183-1 FCC Test Report Page 2 of 50 Test Report Basic Information Applicant..................................: Shenzhen Juku Intelligent Technology Co., Ltd. Address of Applicant...............: Room 708, Block 6, Tian'an Cloud Park, No. 22, Xuegangbei Road, Longgang, ShenZhen, China Manufacturer..........................: Shenzhen Juku Intelligent Technology Co., Ltd. Address of Manufacturer........: Room 708, Block 6, Tian'an Cloud Park, No. 22, Xuegangbei Road, Longgang, ShenZhen, China Product Name.........................: 3D GALAXY Projector Brand Name.............................: Rovmiment Main Model..............................: GSP02 Series Models..........................: GSP01, GSP02-PRO, GSP03, GSP04, GSP05 Test Standard..........................: FCC Part 15 Subpart C KDB 558074 D01 15.247 Meas Guidance v05r02 ANSI C63.4-2014 ANSI C63.10-2020 + Cor. 1-2023+C63.10a-2024 + Errata to C63.10a-2024 Date of Test .............................: 2026-07-01 to 2026-07-10 Test Result...............................: PASS Tested By ................................: (Walker Wu) Reviewed By............................: (Lorzix Luo) Authorized Signatory............: (Lahm Peng) Note : This test report is limited to the above client company and the product model only. It may not be duplicated without prior permitted by Shenzhen CCUT Quality Technology Co., Ltd.. All test data presented in this test report is only applicable to presented test sample. Report No: SSP26070183-1 FCC Test Report Page 3 of 50 CONTENTS 1. General Information ....................................................................................................................................................5 1.1 Product Information .............................................................................................................................................5 1.2 Test Setup Information..........................................................................................................................................6 1.3 Compliance Standards ...........................................................................................................................................7 1.4 Test Facilities ........................................................................................................................................................7 1.5 List of Measurement Instruments ..........................................................................................................................8 1.6 Measurement Uncertainty .....................................................................................................................................9 2. Summary of Test Results ........................................................................................................................................... 10 3. Antenna Requirement ............................................................................................................................................... 11 3.1 Standard and Limit.............................................................................................................................................. 11 3.2 Test Result .......................................................................................................................................................... 11 4. Conducted Emissions ................................................................................................................................................ 12 4.1 Standard and Limit.............................................................................................................................................. 12 4.2 Test Procedure.................................................................................................................................................... 12 4.3 Test Data and Results .......................................................................................................................................... 13 5. Radiated Emissions ................................................................................................................................................... 16 5.1 Standard and Limit.............................................................................................................................................. 16 5.2 Test Procedure.................................................................................................................................................... 16 5.3 Test Data and Results .......................................................................................................................................... 18 6. Band-edge Emissions(Radiated) ............................................................................................................................... 22 6.1 Standard and Limit.............................................................................................................................................. 22 6.2 Test Procedure.................................................................................................................................................... 22 6.3 Test Data and Results .................................…

Text truncated - open the document above for the full version.

深 圳旭航通讯科技有限公司 Shenzhen Xuhang Communication 规格承认书 Specification Acknowledgeme nt 客户 CUSTOMER 客户料号 CUSTOMERNO. 供方品名 PART NAME WIFI天线 规格名称 SUPPLIERNO. 客户确认 CUSTOMERAPPROVEDBY 检验 APPROVAL 审核 CHIEF 批准 SUPERVISOR 设计 DESIGN 审核 CHECK 批准 APPROVAL LuoRobertS HANG Date:June 18, 2025 Address: 213-214, 2nd Floor, Building 1, Chenghe De Industrial Zone, No. 23, Huangang Road, Longhua District, Shenzhen City, Guangdong Province DIRECTORY NO.ContentsNumber ofPage PageCode 1SpecCover11 2DIRECTORY12 3TestReports13 4MatchingCircuits14 5DRAWING15 6TestData36-9 7 Antennaassemblyposition 110 电性测试报告 TEST REPORTS 频率 Frequency WIFI(2400~2500MHz) 阻抗 Impedance 50 0hm Nominal 驻波比 V.S.W.R ＜2.0 回波损耗 Return Loss -10dB Max 辐射 Radiation Omni-directional 增益 Gain(Peak) 0.48dBi 极化方式 Polarization Linear,Vertical 功率 Admitted Power 1W 连接器 Connector Physical Properties 天线材质 Antenna Material PIFA Antenna 线材类型 Cable Type O.D.1.13mm 工作温度 Operating Temp. -10-+60°C 存储温度 Storage Temp. -10-+70°C 线材颜色 Cable Color Black Matching Circuits Tuilding-out circuit The originalmatchingcircuithas not been modified DRAWING Unit (mm) ±260mm*8mm 测试数据 Test Data 测试数据 Test Data 无源数据 Passive data 3D Passive Test For 2400-2500 FreqEffiGain (MHz)(%)(dBi) 240040.62-0.3 241041.33-0.07 242043.240.18 243042.650.16 244043.540.42 245044.190.46 246044.100.48 247043.290.45 248040.450.15 249038.400.13 250038.910.26 无源驻波 Standingwaveloss 天线安装位置 Antenna assembly position

Report No: SSP26070183-1 FCC ID: 2BXML-GSP02 Annex of Test Report Annex C. Test Photos Conducted Emission Test View 1 Radiated Emission Test View Below 1GHz Report No: SSP26070183-1 FCC ID: 2BXML-GSP02 Annex of Test Report Radiated Emission Test View Above 1GHz