2BXO4-M1Tracker

Manual Model: TypeB M1 The Apple Find My network provides an easy,secure way to locate item using the Find My app on your iPhone, iPad, Mac, or the Find Items app on Apple Watch. To use the Apple Find My app to locate item, the latest version of iOS, iPadOS, or macOS is recommended. The Find Items app on Apple Watch requires the latest version of watchOS. Use of the Works with Apple badge means that a product has been designed to work specifically with the technology identified in the badge and has been certified by the product manufacturer to meet Apple Find My network product specifications and requirements. Apple is not responsible for the operation of this device or use of this product or its compliance with safety and regulatory standards. Apple, Apple Find My, Apple Watch, Find My, iPhone, iPad, iPadOS, Mac, macOS and watchOS are the trademarks of Apple Inc. IOS is a trademark or registered trademark of Cisco in the U.S. and other countries and is used under license. Open or download the free Find My app or Google's Find Hub app from the App Store or on Google Play. For iOS 1.Press and hold the button for 5 seconds. 2.Open the Find My App. 3.Tap Add item. 4.Tap Other Supported item. 5.MiniTag will appear. Tap Connect. 6.You are now connected. To Disconnect the Device: 1.Open the app and select the item. 2.Scroll to the bottom of the screen. 3.Tap Remove Item and then tap Remove to confirm. For Android device 1.Press and hold for 5 seconds. 2.Turn on your Android phone's screen. 3.You will receive a quick pairing notification on your phone prompting you to set up a new device , alongwith a picture of the device. 4.Follow the on-screen instructions to complete the pairing process. To Disconnect the Device: 1.Open the app and tap on the item. 2.Tap the settings icon on the right of the item. 3.Tap"Remove from Find Hub" to disconnect. Confirm Status 1.Double-click the button. 2.If the device emits one beep and the light blinks three times, the device is connected. 3.If the device emits three beeps and no lights blink, the device is not connected. Factory Reset 1.Press the button 4 times. 2.Wait for the beeps, then immediately press & hold the button for 8 seconds and a short music will sound. Power off/Disable Press 5 times, beeps will sound. BatterySpecifications Replaceablebatterycapacity:CR20323V-220mAh Google,Android,GooglePlay, Find Hub and Fast Pair are trademarksof GoogleLLC. This producthas beencertifiedby Googleto meetFind Hub networkaccessoryspecifications.Googleis not responsible for the operationof thisproduct.Googleis alsonot responsiblefor ensuringthat the productcomplieswith any applicablesafetystandardsor otherrequirements. Find Hub helpsyou find and connectto what mattersin a single, secureplace.Findyourlost phoneor otherimportant belongingsquickly.You can also use Find Hub for seamless locationsharingwi th friends& familyfor peaceof mind. Pairingwith your Androiddevice 1.Makesure that yourphonehas Bluetoothand Location turnedon. 2.Verifythat your phoneis connectedto a Wi-Fior mobile network. 3.Makesure your phoneis within0.5 meters(1.6f eet) of the device. 4.Navigateto Settings> Google> Devices& Sharing> Devices > checkScan for nearbyDeviceis ON. Note:If you dismissthe Fast Pairpop up twiceor frequentlypair and unpaira tag, you mighttriggerthe banninglogic, whichpreventsunnecessaryFast Pair pop ups. To resolvethi s, you can eitherwait for five minutesfor the Fast Pair pop up to be re-enabledor rebootyour phone. Someof thesestepsare applicableonly on Android10 and above. RegulatorysafetyInformation FCC ID:2BXO4-M1 productoverview ButtonCase Opening 3 WARNING:KEEPBATTERIES OUT OF REACHOF CHILDREN swallowingmay lead to ser ious injuryin as little as 2 hoursor death , due to chemicalburnsand potentialperforationof the oesophagus. If you suspectyour child has swallowedor inserted a buttonbatteryimmediatelycall the 24 -hourpoison Informationcentrefor fast expertadvice. Ratedvoltage3v Ratedcurrent~ 15mA Immediatelydisposeof used batteriesand keep away from children. Do NOT disposeof batteriesin householdtrash. Even used batteriesmay causesevere injury or death . FCC STATEMENT NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. RF warning statement: The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Covered Equipment Attestation Letter For Certification Service in the USA Federal Communications Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 To whom it may concern Pursuant to Section 2.911(d)(5)(i)-(ii) of the Commission’s Rules (47 C.F.R.) we attest as follows for the product listed below: FCC ID Model name 2BXO4-M1 TypeB M1 We, Applicant Company Name: Shenzhen Yuwuque Technology Co., Ltd. Address: Room 2601, Block A, Zhantao Technology Building, Minzhi Street, Xinniu Community, Longhua District, Shenzhen, Guangdong, China Phone: +86-13538214502 certify that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. This includes the cybersecurity and anti-virus software produced or provided by Kaspersky Lab, Inc. or any of ist successors and assignees. We certify that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. If you have any questions, please feel free to contact us at the address shown below. Sincerely, 2026-09-17 Signature Date Printed Name of Signee / Title: Danhong Li / Operations Supervisor Company: Shenzhen Yuwuque Technology Co., Ltd. Address: Room 2601, Block A, Zhantao Technology Building, Minzhi Street, Xinniu Community, Longhua District, Shenzhen, Guangdong, China Phone: +86-13538214502 Fax: NA Email: [email protected]

Due Diligence Letter For Certification Service in the USA Federal Communications Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 To whom it may concern FCC ID Model name 2BXO4-M1 TypeB M1 Pursuant to KDB 986446 D01 Covered Equipment Guidance the evaluation of the product above shows compliance for the following reasons: Compliance Evaluation process Results Inherent compliance The chipset(s) used is not capable of running the cybersecurity and/or anti-virus software Compliance The memory used does not allow the running the cybersecurity and/or anti-virus software Compliance The storage capacity does not allow the running the cybersecurity and/or anti-virus software Compliance The operating system used is not capable of running the cybersecurity and/or anti-virus software Compliance No inherent compliance Based on software bill of material Based on scan for running software on the device Based on filesystem scan for cybersecurity and/or anti-virus software The equipment for which authorization is sought complies with the rules and fulfils the requirements as detailed in the above mentioned KDB. Evaluation performed by Company Name: CTSL Testing (Dongguan) Co., Ltd. Contact Name: Steve Qin Address: Building 1, Houjie Road, Houjie Town, Guangdong Province Dongguan City, China Phone: +86-13018606640 Email: [email protected] Signature: Date: 2026-09-17

Confidentiality Request Letter For Certification Service in the USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 To whom it may concern Pursuant to Paragraphs §0.457 and 0.459 of the Commission’s Rules (47 C.F.R.) and Section §552(b)(4) of the Freedom of Information Act, we request confidentiality for the documentation of the following products: FCC ID Model name 2BXO4-M1 TypeB M1 For the products listed above, we request permanent confidentiality for all applicable exhibits as there are: • the Operational Description • the Block Diagram • the Schematics • the Part List • the Tune up Information The above listed exhibits contain trade secrets and proprietary information that could be of benefit to our competitors. If you have any questions, please feel free to contact us at the address shown below. Sincerely, 2026-09-17 Signature Date Printed Name of Signee / Title: Danhong Li / Operations Supervisor Company: Shenzhen Yuwuque Technology Co., Ltd. Address: Room 2601, Block A, Zhantao Technology Building, Minzhi Street, Xinniu Community, Longhua District, Shenzhen, Guangdong, China Phone: +86-13538214502 Fax: NA Email: [email protected]

Page1of4 CTSLTesting(Dongguan)Co.,Ltd. ReportNo.:CTSL2620730449E AnnexA. EUTExternalPhotos FCCID:2BXO4-M1 Building1,HoujieRoad,HoujieTown,GuangdongProvinceDongguanCity,China Tel:0769-86009597E-mail:[email protected]://www.ctsl-lab.com AnnexA. EUTExternalPhotos Photo1ExternalphotosofEUT Photo2ExternalphotosofEUT Page2of4 CTSLTesting(Dongguan)Co.,Ltd. ReportNo.:CTSL2620730449E AnnexA. EUTExternalPhotos FCCID:2BXO4-M1 Building1,HoujieRoad,HoujieTown,GuangdongProvinceDongguanCity,China Tel:0769-86009597E-mail:[email protected]://www.ctsl-lab.com Photo3ExternalphotosofEUT Photo4ExternalphotosofEUT Page3of4 CTSLTesting(Dongguan)Co.,Ltd. ReportNo.:CTSL2620730449E AnnexA. EUTExternalPhotos FCCID:2BXO4-M1 Building1,HoujieRoad,HoujieTown,GuangdongProvinceDongguanCity,China Tel:0769-86009597E-mail:[email protected]://www.ctsl-lab.com Photo5ExternalphotosofEUT Photo6ExternalphotosofEUT Page4of4 CTSLTesting(Dongguan)Co.,Ltd. ReportNo.:CTSL2620730449E AnnexA. EUTExternalPhotos FCCID:2BXO4-M1 Building1,HoujieRoad,HoujieTown,GuangdongProvinceDongguanCity,China Tel:0769-86009597E-mail:[email protected]://www.ctsl-lab.com Photo7ExternalphotosofEUT Photo8ExternalphotosofEUT ------------------------------------------EndofEUTExternalPhotos------------------------------------------

FCCIDLabelingandLocation FCCIDLabel Thelabelshownshallbepermanentlyaffixedataconspicuouslocationonthedeviceandbe readilyvisibletotheuseratthetimepurchase(Labelingrequirementsper2.925) FCCID:2BXO4-M1

Page 1 of 3 CTSL Testing (Dongguan) Co., Ltd. Report No.: CTSL2620730449E Annex B. EUT Internal Photos FCC ID: 2BXO4-M1 Building 1, Houjie Road, Houjie Town, Guangdong Province Dongguan City, China Tel: 0769-86009597 E-mail:[email protected] http://www.ctsl-lab.com Annex B. EUT Internal Photos Photo 1 Internal photos of EUT Photo 2 Internal photos of EUT Page 2 of 3 CTSL Testing (Dongguan) Co., Ltd. Report No.: CTSL2620730449E Annex B. EUT Internal Photos FCC ID: 2BXO4-M1 Building 1, Houjie Road, Houjie Town, Guangdong Province Dongguan City, China Tel: 0769-86009597 E-mail:[email protected] http://www.ctsl-lab.com Photo 3 Internal photos of EUT Photo 4 Internal photos of EUT Antenna position Page 3 of 3 CTSL Testing (Dongguan) Co., Ltd. Report No.: CTSL2620730449E Annex B. EUT Internal Photos FCC ID: 2BXO4-M1 Building 1, Houjie Road, Houjie Town, Guangdong Province Dongguan City, China Tel: 0769-86009597 E-mail:[email protected] http://www.ctsl-lab.com Photo 5 Internal photos of EUT Photo 6 Internal photos of EUT ------------------------------------------End of EUT Internal Photos ------------------------------------------

Page 1 of 3 CTSL Testing (Dongguan) Co., Ltd. Report No.: CTSL2620730449E RF Exposure Evaluation FCC ID:2BXO4-M1 Building 1, Houjie Road, Houjie Town, Guangdong Province Dongguan City, China Tel: 0769-86009597 E-mail:[email protected] http://www.ctsl-lab.com RF Exposure Evaluation 1. RF Exposure Evaluation Method According to KDB 447498 D01 General RF Exposure Guidance v06, unless specifically required by the published RF exposure KDB procedures, standalone 1-g head or body and 10-g extremity SAR evaluation for general population exposure conditions, by measurement or numerical simulation, is not required when the corresponding SAR Test Exclusion Threshold condition(s), listed below, is (are) satisfied. For 100 MHz to 6 GHz and test separation distances ≤ 50 mm, the 1-g and 10-g SAR test exclusion thresholds are determined by the following: [(max. power of channel, including tune-up tolerance, mW) / (min. test separation distance, mm)] · [√f(GHz)] ≤ 3.0 for 1-g SAR, and ≤ 7.5 for 10-g extremity SAR, where f(GHz) is the RF channel transmit frequency in GHz Power and distance are rounded to the nearest mW and mm before calculation The result is rounded to one decimal place for comparison According to FCC 1.1310: The criteria listed in the following table shall be used to evaluate the environment impact of human exposure to radio frequency (RF) Radiation as specified in §1.1307(b) EUT Specification EUT Tracker Frequency band (Operating) WLAN: 2.412GHz ~ 2.462GHz WLAN: 5.150GHz ~ 5.250GHz WLAN: 5.725GHz ~ 5.850GHz Others BLE(2M):2402-2480MHz, Device category Portable (<20cm separation) Mobile (>20cm separation) Others Exposure classification Occupational/Controlled exposure (S = 5mW/cm 2 ) General Population/Uncontrolled exposure(S=1mW/cm 2 ) Antenna diversity Single antenna Multiple antennas Tx diversity Rx diversity Tx/Rx diversity Max. output power BLE(2M) : 4.57dBm (0.002864W) Antenna gain (Max) 1.71 dBi Evaluation applied MPE Evaluation SAR Evaluation Page 2 of 3 CTSL Testing (Dongguan) Co., Ltd. Report No.: CTSL2620730449E RF Exposure Evaluation FCC ID:2BXO4-M1 Building 1, Houjie Road, Houjie Town, Guangdong Province Dongguan City, China Tel: 0769-86009597 E-mail:[email protected] http://www.ctsl-lab.com 2. SAR Test Exclusion Thresholds for 100 MHz – 6 GHz and ≤ 50 mm Approximate SAR Test Exclusion Power Thresholds at Selected Frequencies and Test Separation Distances are illustrated in the following Table. The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] x [√f(GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR,where f(GHz) is the RF channel transmit frequency in GHz Power and distance are rounded to the nearest mW and mm before calculation The result is rounded to one decimal place for comparison The test exclusions are applicable only when the minimum test separation distance is ≤ 50 mm and for transmission frequencies between 100 MHz and 6 GHz. When the minimum test separation distance is < 5 mm, a distance of 5 mm is applied to determine SAR test exclusion. Page 3 of 3 CTSL Testing (Dongguan) Co., Ltd. Report No.: CTSL2620730449E RF Exposure Evaluation FCC ID:2BXO4-M1 Building 1, Houjie Road, Houjie Town, Guangdong Province Dongguan City, China Tel: 0769-86009597 E-mail:[email protected] http://www.ctsl-lab.com 3. Conducted Power Result Maximum measured transmitter power: BLE (1M&2M) Mode Frequency Measured Conducted output power Antenna gain Target Power Max Tune-up Powe (MHz) (dBm) (dBi) (dBm) (dBm) GFSK 2M 2402 3.78 1.71 4 +1 5 2440 4.37 1.71 4 +1 5 2480 4.57 1.71 5 +1 6 4.Calculated Result and Limit Mode Frequency Max Tune-up Power Max Tune-up Power min. test separation distance [√f(GHz)] Result Limit (MHz) (dBm) (mW) (mm) BLE-GFSK (2M) 2480 6 3.981 5 1.575 1.254 3.0 Remark: The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW) / (min. test separation distance, mm)] x [√f(GHz)] The test Result is less than 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR. Conclusion: So, SAR test is not required The measurement results comply with the FCC Limit per 47 CFR 2.1093 for the uncontrolled RF Exposure and SAR Exclusion Threshold per KDB 447498 D01v06 --------------------------------------End of RF Exposure Evaluation --------------------------------------

Approval sheet Page 1 of 12 ASC_RFECA3216060A1T_V10 Oct. 2019 RFECA Series – RoHS Compliance CERAMIC ANTENNA Halogens Free Product 2.4 GHz ISM Band RF Application P/N: RFECA3216060A1T *Contents in this sheet are subject to change without prior notice. Walsin Technology Corporation Address: 566-1, Ko-Shi Road , Yang-Mei, Tao-Yuan, 32668, Taiwan Approval sheet Page 2 of 12 ASC_RFECA3216060A1T_V10 Oct. 2019 FEATURES 1. Surface Mounted Devices with a small dimension of 3.2 X 1.6 X 0.6 mm 3 meet future miniaturization trend. 2. High stability in Temperature / Humidity Change. 3. Superb performance to place on the middle of PCB edge and excellent peak/ average gain observed by field test application. APPLICATIONS 1. ISM Band 2.4GHz applications. 2. Bluetooth.. CONSTRUCTION DIMENSIONS Figure Symbol Dimension (mm) L 3.10 ± 0.20 W 1.60 ± 0.20 T 0.60 ± 0.10 A 0.25 ± 0.20 PIN Connection 1 Feeding 2 Soldering terminal Approval sheet Page 3 of 12 ASC_RFECA3216060A1T_V10 Oct. 2019 SOLDER LAND PATTERN DESIGN Type-1: Empty Space 6.45 mm x 4.0 mm Figure (Empty Space 6.45 mm x 4.0 mm) The limited size for ECA3216 is L>30mm and D>6mm Land Pattern TYPE-1 TEST BOARD ELECTRONIC CHARACTERISTICS *Note 1.Central Frequency should be defined after customers’ application approval. Item Specification Working Frequency Range 2.4GHz~2.4835GHz (Note-1) Gain 1.71 dBi (Max) VSWR 2.0 max. Polarization Linear Azimuth Beamwidth Omni-directional Impedance 50 Power Capacity 3 W max. Maximum Input Power 5 Watts for 5 minutes FEED線建議 靠內側，GND 線靠外側 Approval sheet Page 4 of 12 ASC_RFECA3216060A1T_V10 Oct. 2019 Type-2: Empty Space 3.0 mm x 8.0 mm Figure (Empty Space 3.0 mm x 8.0 mm) The limited size for ECA3216 is L>30mm and D>6mm Land Pattern TYPE-2 TEST BOARD ELECTRONIC CHARACTERISTICS *Note 1. Central Frequency should be defined after customers’ application approval. Item Specification Working Frequency Range 2.4GHz~2.4835GHz (Note-1) Gain 2 dBi (Typical) VSWR 3.0 max. Polarization Linear Azimuth Beamwidth Omni-directional Impedance 50 Power Capacity 3 W max. Maximum Input Power 5 Watts for 5 minutes FEED線建議 靠內側，GND 線靠外側 Approval sheet Page 5 of 12 ASC_RFECA3216060A1T_V10 Oct. 2019 Antenna on Type-1 Test Board (Empty Space 6.45 mm x 4.0 mm, 90 mm x 40 mm Ground & Thickness 0.8 mm) Antenna S11 on Type-1 Test Board Antenna VSWR on Type-1 Test Board 1.84 @ 2.40 GHz 1.23 @ 2.45 GHz 1.90 @ 2.50 GHz -10.57 dB @ 2.40 GHz -19.42 dB @ 2.45 GHz -10.13 dB @ 2.50 GHz FEED線建議 靠內側，GND 線靠外側 Approval sheet Page 6 of 12 ASC_RFECA3216060A1T_V10 Oct. 2019 Antenna on Type-2 Test Board (Empty Space 3.0 mm x 8.0 mm, 90 mm x 40 mm Ground & Thickness 0.8 mm) Antenna S11 on Type-2 Test Board Antenna VSWR on Type-2 Test Board 2.76 @ 2.40 GHz 1.09 @ 2.45 GHz 2.55 @ 2.50 GHz -6.57 dB @ 2.40 GHz -30.81 dB @ 2.45 GHz -7.18 dB @ 2.50 GHz FEED線建議 靠內側，GND 線靠外側 Approval sheet Page 7 of 12 ASC_RFECA3216060A1T_V10 Oct. 2019 RADIATION PATTERN Radiation Pattern and Gain were dependent on measurement board design. The specification of RFECA3216060A1T antenna was measured based on the PCB size and installation position as shown in the below figure Test Board. Antenna on Type-1 Test Board ZX plane ZY plane XY plane Frequency [MHz] Max Value [dB] Average [dB] Max Value [dB] Average [dB] Max Value [dB] Average [dB] 2400 -0.18 -1.35 0.88 -1.72 -0.20 -2.31 2450 1.02 -0.42 1.71 -0.96 0.48 -1.61 2500 0.05 -0.90 0.97 -1.39 0.38 -1.83 FEED線建議 靠內側，GND 線靠外側 Approval sheet Page 8 of 12 ASC_RFECA3216060A1T_V10 Oct. 2019 Antenna on Type-2 Test Board ZX plane ZY plane XY plane Frequency [MHz] Max Value [dB] Average [dB] Max Value [dB] Average [dB] Max Value [dB] Average [dB] 2400 -0.82 -1.83 0.27 -2.11 -0.58 -2.55 2450 0.94 -0.79 1.58 -1.15 0.47 -1.72 2500 -0.64 -1.10 0.35 -1.66 -0.44 -1.99 FEED線建議 靠內側，GND 線靠外側 Approval sheet Page 9 of 12 ASC_RFECA3216060A1T_V10 Oct. 2019 RELIABILITY TEST Test item Test condition / Test method Specification Solderability JIS C 0050-4.6 JESD22-B102D *Solder bath temperature：235  5C *Immersion time：2  0.5 sec Solder：Sn3Ag0.5Cu for lead-free At least 95% of a surface of each terminal electrode must be covered by fresh solder. Leaching (Resistance to dissolution of metallization) IEC 60068-2-58 *Solder bath temperature：260  5C *Leaching immersion time：30  0.5 sec Solder : SN63A Loss of metallization on the edges of each electrode shall not exceed 25%. Resistance to soldering heat JIS C 0050-5.4 *Preheating temperature：120~150°C, 1 minute. *Solder temperature：2705C *Immersion time：101 sec Solder：Sn3Ag0.5Cu for lead-free Measurement to be made after keeping at room temperature for 242 hrs No mechanical damage. Electrical specification shall satisfy the descriptions in electrical characteristics under the operational temperature range within -40 ~ 85°C. Loss of metallization on the edges of each electrode shall not exceed 25%. Drop Test JIS C 0044 Customer’s specification. *Height：75 cm *Test Surface：Rigid surface of concrete or steel. *Times：6 surfaces for each units；2 times for each side. No mechanical damage. Electrical specification shall satisfy the descriptions in electrical characteristics under the operational temperature range within -40 ~ 85°C. Vibration JIS C 0040 *Frequency：10Hz~55Hz~10Hz(1min) *Total amplitude：1.5mm *Test times：6hrs.(Two hrs each in three mutually perpendicular directions) No mechanical damage. Electrical specification shall satisfy the descriptions in electrical characteristics under the operational temperature range within -40 ~ 85°C. Adhesive Strength of Termination JIS C 0051- 7.4.3 *Pressurizing force： 5N(≦0603)；10N(>0603) *Test time：10±1 sec No remarkable damage or removal of the termination. Approval sheet Page 10 of 12 ASC_RFECA3216060A1T_V10 Oct. 2019 Bending test JIS C 0051- 7.4.1 The middle part of substrate shall be pressurized by means of the pressurizing rod at a rate of about 1 mm/s per second until the deflection becomes 1mm/s and then pressure shall be maintained for 51 sec. Measurement to be made…

Text truncated - open the document above for the full version.

Page 1 of 48 FCC PART 15 SUBPART C FCC PART 15.247 TEST REPORT FCC ID:2BXO4-M1 Report No: CTSL2620730449E Product Name: Tracker Main Test Model: TypeB M1 Series Models: - Applicant: Shenzhen Yuwuque Technology Co., Ltd. EXECUTIVE SUMMARY A sample of this product was tested and found to be in compliance with FCC PART 15C, FCC PART 15 SUBPART C (15.247). Any reproduction of this document must be done in full. No single part of this document may be reproduced without permission from CTSL. All Test Data Presented in this report is only applicable to presented Test sample. CTSL Testing (Dongguan) Co., Ltd. Main company address: Building 1, Houjie Road, Houjie Town, Guangdong Province Don gguan City, China Page 2 of 48 CTSL Testing (Dongguan) Co., Ltd. Report No.: CTSL2620730449E Building 1, Houjie Road, Houjie Town, Guangdong Province Dongguan City, China Tel: 0769-86009597 E-mail:[email protected] http://www.ctsl-lab.com Test Report FCC ID:2BXO4-M1 Applicant Name Shenzhen Yuwuque Technology Co., Ltd. Applicant Address Room 2601, Block A, Zhantao Technology Building, Minzhi Street, Xinniu Community, Longhua District, Shenzhen, Guangdong China Manufacturer Name Shenzhen Dealbeta Lighting Technology Co., Ltd. Manufacturer Address Room 2601, Block A, Zhantao Technology Building, Minzhi Street, Xinniu Community, Longhua District, Shenzhen, Guangdong China Trade Mark - Product name Tracker Main Test Model TypeB M1 Series Models - Standard FCC Part 15 Subpart C (15.247) ANSI C63.10-2020 + Cor. 1-2023+C63.10a-2024 + Errata to C63.10a-2024 FCC KDB 558074 D01 15.247 Meas Guidance v05r02 Test Location ISO/IEC 17025 by ILAC-MRA is A2LA 7556.01 CTSL Testing (Dongguan) Co., Ltd. 1/F, Building 1, No. 15, Jiaoyuansongshan Hetian Village, Houjie Town Dongguan City, Guangdong, People's Republic of China Receipt Date 2026.07.28 Test period 2026.07.29-2026.08.22 Issue Date 2026.08.26 Conclusion The equipment under test was found to be compliance with the requirements of the standards applied. Performs Testing: Ethan Zhao (Special seal) Test Report Reviewer: Steve Qin Test Report Authorizer: Alan Li Page 3 of 48 CTSL Testing (Dongguan) Co., Ltd. Report No.: CTSL2620730449E Building 1, Houjie Road, Houjie Town, Guangdong Province Dongguan City, China Tel: 0769-86009597 E-mail:[email protected] http://www.ctsl-lab.com TABLE OF CONTENTS Description Page 1. GENERAL INFORMATION ................................................................................................................... 5 1.1. General Description of EUT (Equipment Under Test) ................................................................ 5 1.2. Antenna Information ........................................................................................................................ 6 1.3. Information of RF Cable .................................................................................................................. 6 2. SUMMARY OF TEST ........................................................................................................................... 7 2.1. Test Standards ................................................................................................................................. 7 2.2. Summary of test result .................................................................................................................... 7 2.3. Test Facilities .................................................................................................................................... 8 2.4. Measurement uncertainty ............................................................................................................... 8 2.5. Block Diagram .................................................................................................................................. 9 2.6. Assistant equipment used for test ................................................................................................. 9 2.7. Test mode ....................................................................................................................................... 10 2.8. Channel List .................................................................................................................................... 11 2.9. Power Setting of Test Software ................................................................................................... 11 2.10. Test Equipment ............................................................................................................................ 12 3. DUTY CYCLE ................................................................................................................................... 14 3.1. Limit .................................................................................................................................................. 14 3.2. Test Setup ....................................................................................................................................... 14 3.3. Spectrum Analyzer Setting ........................................................................................................... 14 3.4. Test Procedure ............................................................................................................................... 14 3.5. Test Conditions ............................................................................................................................... 14 3.6. Test Result ...................................................................................................................................... 15 3.7. Original Test record ....................................................................................................................... 15 4. 6DB BANDWIDTH ....................................................................................................................... 16 4.1. Limit ................................................................................…

Text truncated - open the document above for the full version.

Page1of2 CTSLTesting(Dongguan)Co.,Ltd. ReportNo.:CTSL2620730449E AnnexC. TestSetupPhotos FCCID:2BXO4-M1 Building1,HoujieRoad,HoujieTown,GuangdongProvinceDongguanCity,China Tel:0769-86009597E-mail:[email protected]://www.ctsl-lab.com AnnexC. TestSetupPhotos Photo1TestSetupPhotosofRadiatedEmissionTest(30-1000MHz) Photo2TestSetupPhotosofRadiatedEmissionTest(Above1GHz) Page2of2 CTSLTesting(Dongguan)Co.,Ltd. ReportNo.:CTSL2620730449E AnnexC. TestSetupPhotos FCCID:2BXO4-M1 Building1,HoujieRoad,HoujieTown,GuangdongProvinceDongguanCity,China Tel:0769-86009597E-mail:[email protected]://www.ctsl-lab.com Photo3TestSetupPhotosofConnectEUTAntennaTerminalTest ------------------------------------------EndofTestSetupPhotos--------------------------------------…

Text truncated - open the document above for the full version.