2BXOT-LR1152MotoCAN

Local Representative Letter For Certification Service in the USA Federal Communications Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 To whom it may concern Pursuant to Section 2.911(d)(7), of the Commission’s Rules (47 C.F.R.) we attest as follows for the product listed below: FCC IDModel name 2BXOT-LR1152LR1152 We hereby acknowledge as follows: i.both signees confirm that the point of contact accepts responsibility to act as a US- American Representative on behalf of the applicant ii.the point of contact provides the physical U.S. address and email as listed below iii.both parties maintain the requirements of this agreement for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. iv.An expiration date for this letter does not exist. In case the U.S. agent changes, the grantee is obligated to notify the FCC within 30 days via the granting TCB. US-American Point of ContactApplicant/Approval Holder Signature Date: 2026-08-18 Signature Date: 2026-08-18 Company Name:GLOCERTS TECHNOLOGY INCLNRDR LLP FRN:00363397370038775623 Contact Name:Huiying FanBaptiste Juvin Address:19784 SUNKISSED RIDGE DR, RIVERSIDE, CA 92507 52a Tower Road West Saint Leonards-On-Sea United Kingdom, TN38 0RG Phone:(626) 588-8039+33 629133522 Email:[email protected]@lonerider-motorcycle.com

(LNRDR LLP) (08/18/2026) Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: Attestation Statements Part 2.911(d)(5)(i) request for (FCC ID:2BXOT-LR1152) [LNRDR LLP] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. We also certify that, as of the date of the filing of the application, the equipment does not utilize cyber-security or anti-virus software from Kaspersky Lab, Inc, or any of its successors and assignees, which is also on the “covered list”. Sincerely, Baptiste Juvin (LNRDR LLP) (07/13/2026) Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: Attestation Statements Part 2.911(d)(5)(ii) request for (2BXOT-LR1152) [LNRDR LLP] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Sincerely, Baptiste Juvin

LNRDR LLP 2026-8-18 Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: CONFIDENTIALITY REQUEST FOR (MotoCAN / LR1152 / FCC ID: 2BXOT- LR1152) To Whom It May Concern: This letter serves as an official request for confidentiality under sections 0.457 and 0.459 of CFR 47. We have requested that the (Shematic, Block diagram, Operation) required to be submitted with this application be permanently withheld from public review. The above documents are company proprietary information that could never get into the possession of your competition. Please contact me if there is any information you may need. Sincerely, Baptiste Juvin

LNRDR LLP 2026-8-18 Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: LETTER OF AGENT AUTHORIZATION To Whom It May Concern: We, the undersigned, hereby authorize (Dongguan Yaxu (AiT) Technology Limited) to act on our behalf in all matters relating to application for equipment authorization, including the signing of all documents relating to these matters. We also hereby certify that no party to the application authorized hereunder is subject to the denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C.853(a). This agreement expires one year from the current date. Sincerely, Baptiste Juvin

LNRDR LLP 2026-8-18 Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: Short Term Confidentiality Request For(MotoCAN / LR1152 AND FCC ID: 2BXOT-LR1152) To Whom It May Concern: In accordance with sections 0.457 and 0.459 of CFR 47, < LNRDR LLP >. requests short-term Confidentiality of following sections of this application for a period of 45 days after grant is issued. Test setup photos External photos Internal photos User’s manual These documents contain detailed system and equipment descriptions and related information about the product, which < LNRDR LLP > considers to be proprietary, confidential, and a custom design and otherwise, would not release to the general public. Since this design is a basis from which future technological products will evolve, < LNRDR LLP > feels that this information would be of benefit to its competitors, and that the disclosure of the information in these documents would give our competitors an unfair advantage in the market. Please contact me if there is any information you may need. Sincerely, Baptiste Juvin

(Size: L 30mm x W 20mm) MotoCAN HVIN: LR1152 Model: LR1152 IC: 36058-LR1152 FCC ID:2BXOT-LR1152

Page 1 of 8 Report No.: AiTDG-260708011FW2 Note: This device has been tested and found to comply with the standard(s) listed, this test report merely corresponds to the test sample. It is not permitted to copy extracts of these test result without the written permission of the test laboratory. This report shall not be reproduced except in full, without the written approval of Dongguan Yaxu (AiT) Technology Limited. If there is a need to alter or revise this document, the right belongs to Dongguan Yaxu (AiT) Technology Limited, and it should give a prior written notice of the revision document. This test report must not be used by the client to claim product endorsement. Dongguan Yaxu (AiT) Technology Limited No.22, Jinqianling 3rd Street, Jitigang, Huangjiang, Dongguan, Guangdong, China. RF Exposure evaluation Product Name:MotoCAN Brand Name: Model:LR1152 Series Model: N/A FCC ID:2BXOT-LR1152 Applicant:LNRDR LLP Address: 52a Tower Road West Saint Leonards-On-Sea United Kingdom, TN38 0RG Manufacturer:PICCA ELECTRONICS LIMITED Address: 206 Dongmen Road Longgang District Shenzhen Guangdong Province China 518111 Standard(s): 47CFR §1.1310, 47CFR §2.1091 KDB447498 D01 General RF Exposure Guidance v06 Date of Receipt:Jul. 08, 2026 Date of Test:Jul. 08, 2026~ Jul. 16, 2026 Issued Date:Jul. 16, 2026 Issued By: Dongguan Yaxu (AiT) Technology Limited No.22, Jinqianling 3rd Street, Jitigang, Huangjiang, Dongguan, Guangdong, China Tel.: +86-769-8202 0499 Fax.: +86-769-8202 0495 Reviewed by: Approved by: Emiya Lin Simba Huang Page 2 of 8 Report No.: AiTDG-260708011FW2 Report Revise Record Report VersionIssued DateNotes M0Jul. 16, 2026Initial Release Page 3 of 8 Report No.: AiTDG-260708011FW2 Contents 1GENERAL INFORMATION........................................................................................................................................4 1.1ENVIRONMENTAL CONDITIONS........................................................................................................................................4 1.2GENERAL DESCRIPTION OF EUT......................................................................................................................................4 1.3TEST FACILITY..............................................................................................................................................................6 1.4MEASUREMENT UNCERTAINTY........................................................................................................................................6 2METHOD OF MEASUREMENT..................................................................................................................................7 2.1APPLICABLE STANDARD.................................................................................................................................................7 2.2LIMIT.........................................................................................................................................................................7 2.3MPE CALCULATION METHOD........................................................................................................................................8 2.4ANTENNA INFORMATION...............................................................................................................................................8 2.5MANUFACTURING TOLERANCE.......................................................................................................................................8 2.6STANDALONE MPE RESULT.........................................................................................................................................11 2.7CONCLUSION.............................................................................................................................................................11 Page 4 of 8 Report No.: AiTDG-260708011FW2 1GENERAL INFORMATION 1.1Environmental conditions During the measurement the environmental conditions were within the listed ranges: Normal Temperature:25°C Relative Humidity:55 % Air Pressure:101 kPa 1.2General Description of EUT Product Name:MotoCAN Model/Type reference: LR1152 Serial Model:N/A Power Ratings:DC 9 V to 18 V (12 V nominal motorcycle system) Hardware Version: N/A Software Version:N/A Sample(s) Status: AiTDG-260708011-1(Normal sample) AiTDG-260708011-2(Engineer sample) Bluetooth LE: Supported type: Bluetooth LE 1M/2M Modulation: GFSK Operation frequency: 2402MHz~2480MHz Channel number: 40 Channel separation: 2MHz Antenna type: PCB Antenna Antenna gain: 3.26 dBi Remark: The above DUT's information was declared by manufacturer. For more detailed features description, please refer to the manufacturer’s specifications or the User's Manual. Page 5 of 8 Report No.: AiTDG-260708011FW2 1.3Test Facility Test Laboratory: Dongguan Yaxu (AiT) Technology Limited No.22, Jinqianling 3rd Street, Jitigang, Huangjiang, Dongguan, Guangdong, China The test facility is recognized, certified or accredited by the following organizations: CNAS-Registration No: L6177 Dongguan Yaxu (AiT) technology Limited is accredited to ISO/IEC 17025:2017 general Requirements for the competence of testing and calibration laboratories (CNAS-CL01 Accreditation Criteria for the competence of testing and calibration laboratories) on April 18, 2022 FCC-Registration No.: 703111 Designation Number: CN1313 Dongguan Yaxu (AiT) Technology Limited has been registered and fully described in a report filed with the (FCC) Federal Communications Commission. The acceptance letter from the FCC is maintained in our files. IC-Registration No.: 6819A CAB identifier: CN0122 The 3m Semi-anechoic chamber of Dongguan Yaxu (AiT) Technology Limited has been registered by Certification and Engineering Bureau of Industry Canada for radio equipment testing with Registration No.: 6819A A2LA-Lab Cert. No.: 6317.01 Dongguan Yaxu (AiT) Technology Limited has been accredited by A2LA for technical compet…

Text truncated - open the document above for the full version.

Page 1 of 29 Report No.: AiTDG-260708011FW1 Appendix RF test data for BLE Page 2 of 29 Report No.: AiTDG-260708011FW1 1. Duty Cycle 1.1 Test Result 1.1.1 Ant1 Ant1 Mode TX Type Frequency (MHz) T_on (ms) Period (ms) Duty Cycle (%) Duty Cycle Correction Factor (dB) Max. DC Variation (%) 2402100.000100.000100.000.000.00 2440100.000100.000100.000.000.00 1MSISO 2480100.000100.000100.000.000.00 2402100.000100.000100.000.000.00 2440100.000100.000100.000.000.00 2MSISO 2480100.000100.000100.000.000.00 Page 3 of 29 Report No.: AiTDG-260708011FW1 1.2 Test Graph 1.2.1 Ant1 1M_LCH_2402MHz_Ant1_NTNV 1M_MCH_2440MHz_Ant1_NTNV Page 4 of 29 Report No.: AiTDG-260708011FW1 1M_HCH_2480MHz_Ant1_NTNV 2M_LCH_2402MHz_Ant1_NTNV Page 5 of 29 Report No.: AiTDG-260708011FW1 2M_MCH_2440MHz_Ant1_NTNV 2M_HCH_2480MHz_Ant1_NTNV Page 6 of 29 Report No.: AiTDG-260708011FW1 2. Bandwidth 2.1 Test Result 2.1.1 OBW 99% Occupied Bandwidth (MHz) Mode TX Type Frequency (MHz) ANT ResultLimit Verdict 240211.038/Pass 244011.036/Pass 1MSISO 248011.035/Pass 240212.046/Pass 244012.047/Pass 2MSISO 248012.046/Pass 2.1.2 6dB BW 6dB Bandwidth (MHz) Mode TX Type Frequency (MHz) ANT ResultLimit Verdict 240210.674>=0.5Pass 244010.675>=0.5Pass 1MSISO 248010.676>=0.5Pass 240211.346>=0.5Pass 244011.345>=0.5Pass 2MSISO 248011.348>=0.5Pass Page 7 of 29 Report No.: AiTDG-260708011FW1 2.2 Test Graph 2.2.1 OBW 1M_LCH_2402MHz_Ant1_NTNV 1M_MCH_2440MHz_Ant1_NTNV Page 8 of 29 Report No.: AiTDG-260708011FW1 1M_HCH_2480MHz_Ant1_NTNV 2M_LCH_2402MHz_Ant1_NTNV Page 9 of 29 Report No.: AiTDG-260708011FW1 2M_MCH_2440MHz_Ant1_NTNV 2M_HCH_2480MHz_Ant1_NTNV Page 10 of 29 Report No.: AiTDG-260708011FW1 2.2.2 6dB BW 1M_LCH_2402MHz_Ant1_NTNV 1M_MCH_2440MHz_Ant1_NTNV Page 11 of 29 Report No.: AiTDG-260708011FW1 1M_HCH_2480MHz_Ant1_NTNV 2M_LCH_2402MHz_Ant1_NTNV Page 12 of 29 Report No.: AiTDG-260708011FW1 2M_MCH_2440MHz_Ant1_NTNV 2M_HCH_2480MHz_Ant1_NTNV Page 13 of 29 Report No.: AiTDG-260708011FW1 3. Maximum Conducted Output Power 3.1 Test Result 3.1.1 Power Maximum Peak Conducted Output Power (dBm) Mode TX Type Frequency (MHz) ANT1Limit Verdict 24020.97<=30Pass 2440-1.58<=30Pass 1MSISO 24801.90<=30Pass 24021.03<=30Pass 24401.81<=30Pass 2MSISO 24801.98<=30Pass Note1: Antenna Gain: Ant1: 3.26dBi; Page 14 of 29 Report No.: AiTDG-260708011FW1 3.2 Test Graph 3.2.1 Power 1M_LCH_2402MHz_Ant1_NTNV 1M_MCH_2440MHz_Ant1_NTNV Page 15 of 29 Report No.: AiTDG-260708011FW1 1M_HCH_2480MHz_Ant1_NTNV 2M_LCH_2402MHz_Ant1_NTNV Page 16 of 29 Report No.: AiTDG-260708011FW1 2M_MCH_2440MHz_Ant1_NTNV 2M_HCH_2480MHz_Ant1_NTNV Page 17 of 29 Report No.: AiTDG-260708011FW1 4. Maximum Power Spectral Density 4.1 Test Result 4.1.1 PSD Maximum PSD (dBm) Mode TX Type Frequency (MHz) ANT1Limit(dBm/3kHz) Verdict 2402-0.23dBm/100kHz<=8Pass 2440-2.81dBm/100kHz<=8Pass 1MSISO 24800.75dBm/100kHz<=8Pass 2402-2.28dBm/100kHz<=8Pass 2440-1.54dBm/100kHz<=8Pass 2MSISO 2480-1.35dBm/100kHz<=8Pass Note1: Antenna Gain: Ant1: 3.26dBi; Page 18 of 29 Report No.: AiTDG-260708011FW1 4.2 Test Graph 4.2.1 PSD 1M_LCH_2402MHz_Ant1_NTNV 1M_MCH_2440MHz_Ant1_NTNV Page 19 of 29 Report No.: AiTDG-260708011FW1 1M_HCH_2480MHz_Ant1_NTNV 2M_LCH_2402MHz_Ant1_NTNV Page 20 of 29 Report No.: AiTDG-260708011FW1 2M_MCH_2440MHz_Ant1_NTNV 2M_HCH_2480MHz_Ant1_NTNV Page 21 of 29 Report No.: AiTDG-260708011FW1 5. Unwanted Emissions In Non-restricted Frequency Bands 5.1 Test Result 5.1.1 Ref Mode TX Type Frequency (MHz) ANT Level of Reference (dBm) 24021-3.63 24401-2.64 1MSISO 248010.67 24021-2.28 24401-1.51 2MSISO 24801-1.32 5.1.2 CSE Mode TX Type Frequency (MHz) ANT Level of Reference (dBm) Limit (dBm) Verdict 24021-3.63-23.63Pass 24401-2.64-22.64Pass 1MSISO 248010.67-19.33Pass 24021-2.28-22.28Pass 24401-1.51-21.51Pass 2MSISO 24801-1.32-21.32Pass Page 22 of 29 Report No.: AiTDG-260708011FW1 5.2 Test Graph 5.2.1 Ref 1M_LCH_2402MHz_Ant1_NTNV 1M_MCH_2440MHz_Ant1_NTNV Page 23 of 29 Report No.: AiTDG-260708011FW1 1M_HCH_2480MHz_Ant1_NTNV 2M_LCH_2402MHz_Ant1_NTNV Page 24 of 29 Report No.: AiTDG-260708011FW1 2M_MCH_2440MHz_Ant1_NTNV 2M_HCH_2480MHz_Ant1_NTNV Page 25 of 29 Report No.: AiTDG-260708011FW1 5.2.2 CSE 1M_LCH_2402MHz_Ant1_NTNV 1M_LCH_2402MHz_Ant1_NTNV Page 26 of 29 Report No.: AiTDG-260708011FW1 1M_MCH_2440MHz_Ant1_NTNV 1M_HCH_2480MHz_Ant1_NTNV Page 27 of 29 Report No.: AiTDG-260708011FW1 1M_HCH_2480MHz_Ant1_NTNV 2M_LCH_2402MHz_Ant1_NTNV Page 28 of 29 Report No.: AiTDG-260708011FW1 2M_LCH_2402MHz_Ant1_NTNV 2M_MCH_2440MHz_Ant1_NTNV Page 29 of 29 Report No.: AiTDG-260708011FW1 2M_HCH_2480MHz_Ant1_NTNV 2M_HCH_2480MHz_Ant1_NTNV ********************** End of Report **********************

Page 1 of 35 Report No.: AiTDG-260708011FW1 Note: This device has been tested and found to comply with the standard(s) listed, this test report merely corresponds to the test sample. It is not permitted to copy extracts of these test result without the written permission of the test laboratory. This report shall not be reproduced except in full, without the written approval of Dongguan Yaxu (AiT) Technology Limited. If there is a need to alter or revise this document, the right belongs to Dongguan Yaxu (AiT) Technology Limited, and it should give a prior written notice of the revision document. This test report must not be used by the client to claim product endorsement. Dongguan Yaxu (AiT) Technology Limited No.22, Jinqianling 3rd Street, Jitigang, Huangjiang, Dongguan, Guangdong, China. TEST REPORT Product Name:MotoCAN Brand Name: Model:LR1152 Series Model:N/A FCC ID:2BXOT-LR1152 Applicant:LNRDR LLP Address:52a Tower Road West Saint Leonards-On-Sea United Kingdom, TN38 0RG Manufacturer:PICCA ELECTRONICS LIMITED Address: 206 Dongmen Road Longgang District Shenzhen Guangdong Province China 518111 Standard(s):FCC CFR Title 47 Part 15 Subpart C Section 15.247 Date of Receipt:Jul. 08, 2026 Date of Test:Jul. 08, 2026~ Jul. 16, 2026 Issued Date:Jul. 16, 2026 Issued By: Dongguan Yaxu (AiT) Technology Limited No.22, Jinqianling 3rd Street, Jitigang, Huangjiang, Dongguan, Guangdong, China Tel.: +86-769-8202 0499 Fax.: +86-769-8202 0495 Reviewed by: Approved by: Emiya Lin Simba Huang Page 2 of 35 Report No.: AiTDG-260708011FW1 Report Revise Record Report VersionIssued DateNotes M0Jul. 16, 2026Initial Release Page 3 of 35 Report No.: AiTDG-260708011FW1 Contents 1TEST SUMMARY......................................................................................................................................................4 1.1TEST STANDARDS.........................................................................................................................................................4 1.2TEST SUMMARY...........................................................................................................................................................4 1.3TEST FACILITY..............................................................................................................................................................5 1.4MEASUREMENT UNCERTAINTY........................................................................................................................................5 2GENERAL INFORMATION........................................................................................................................................6 2.1ENVIRONMENTAL CONDITIONS........................................................................................................................................6 2.2GENERAL DESCRIPTION OF EUT......................................................................................................................................6 2.3DESCRIPTION OF TEST MODES AND TEST FREQUENCY.........................................................................................................7 2.4SPECIAL ACCESSORIES...................................................................................................................................................8 2.5EQUIPMENT LIST FOR THE TEST.......................................................................................................................................8 3TEST CONDITIONS AND RESULTS...........................................................................................................................10 3.1CONDUCTED EMISSIONS TEST.......................................................................................................................................10 3.2RADIATED EMISSIONS AND BAND EDGE..........................................................................................................................13 3.3MAXIMUM PEAK CONDUCTED OUTPUT POWER...............................................................................................................29 3.4POWER SPECTRAL DENSITY..........................................................................................................................................30 3.56DB BANDWIDTH......................................................................................................................................................31 3.6OUT-OF-BAND EMISSIONS...........................................................................................................................................32 3.7ANTENNA REQUIREMENT.............................................................................................................................................34 4TEST SETUP PHOTOGRAPHS OF EUT......................................................................................................................35 5EXTERNAL PHOTOGRAPHS OF EUT........................................................................................................................35 6INTERNAL PHOTOGRAPHS OF EUT........................................................................................................................35 Page 4 of 35 Report No.: AiTDG-260708011FW1 1TEST SUMMARY 1.1Test Standards The tests were performed according to following standards: FCC Rules Part 15.247: Frequency Hopping, Direct Spread Spectrum and Hybrid Systems that are in operation within the bands of 902-928 MHz, 2400-2483.5 MHz, and 5725-5850 MHz ANSI C63.10-2020+Cor 1-2023: American National Standard for Testing Unlicensed Wireless Devices KDB558074 D01 15.247 Meas Guidance v05r02: Guidance for Compliance Measurements on Digital Transmission System, Frequency Hopping Spreda Spectrum System, and Hybrid System Devices Operating Under Section 15.247 of the FCC Rules 1.2Test Summary Test ItemSection in 47 CFRResult Antenna requirement§15.203Pass On Time and Duty Cycle// AC…

Text truncated - open the document above for the full version.

OTA TEST REPORT TA Techno logy (Shanghai) Co., Ltd. tested the above equipment in accordance with the requirements in ANSI/IEEE Std 149-2008. The test results show that the equipment tested is capable of demonstrating compliance with the requirements as documented in this report. Prepar ed by: Peng Tao Appr oved by: Kai Xu TA Technology (Shanghai) Co., Ltd. No.145, Jintang Rd, Tangzhen Industry Park, Pudong Shanghai, China TEL: +86‐021‐50791141/2/3 FAX: +86‐021‐50791141/2/3‐8000 Applicant Product Model Espressif System (Shanghai) Co.,Ltd ESP32-S3-WROOM-1 ESP-ANT B Report No. Y2102A0260-T3 Issue Date March 9, 2021 OTA Test Report Report No: Y2102A0260-T3 TA Technology (Shanghai) Co., Ltd. TA-MB-04-008O P age 2 of 13 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. TABLE OF CO NTENTS 1.Test Laboratory .............................................................................................................................. 3 1.1. Notes of the Test Report ................................................................................................... 3 1.2. Test facility ........................................................................................................................ 3 1.3. Testing Location ................................................................................................................ 3 1.4. Laboratory Environment .................................................................................................... 4 2.General Description of Equipment under Test ............................................................................... 5 2.1. Applicant and Manufacturer Information ............................................................................ 5 2.2. General information ........................................................................................................... 5 2.3. Test Date ........................................................................................................................... 5 2.4. Receiving Date .................................................................................................................. 5 2.5. Applied Standards ............................................................................................................. 6 3.Test Conditions .............................................................................................................................. 7 3.1. Test Configuration ............................................................................................................. 7 3.2. Test Measurement ............................................................................................................. 7 4.Test Results ................................................................................................................................... 8 4.1. Gain and Efficiency ............................................................................................................ 8 5.Equipment List ............................................................................................................................... 9 ANNEX A 3-D Pattern Plots ................................................................................................................... 10 ANNEX B：The EUT Appearance and Test Configuration ...................................................................... 12 B.1 EUT Appearance ................................................................................................................... 12 B.2 Test Configuration ................................................................................................................. 13 OTA Test Report Report No: Y2102A0260-T3 TA Technology (Shanghai) Co., Ltd. TA-MB-04-008O P age 3 of 13 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. 1.Test Laboratory 1.1. Notes of the Test Report This report shall not be reproduced in full or partial, without the written approval of TA technology (shanghai) co., Ltd. The results documented in this report apply only to the tested sample, under the conditions and modes of operation as described herein .Measurement Uncertainties were not taken into account and are published for informational purposes only. This report is written to support regulatory compliance of the applicable standards stated above. 1.2. Test facility A2LA (Certificate Number: 3857.01) TA Technology (Shanghai) Co., Ltd. has been listed by American Association for Laboratory Accreditation to perform measurement. 1.3. Testing Location Company: TA Technology (Shanghai) Co., Ltd. Address: No.145, Jintang Rd, Tangzhen Industry Park, Pudong Shanghai, China City: Sh ang hai P ost code: 201201 Country: P. R. China Contact: Xu Ka i Telep hone: +86-021-50791141/2/ 3 Fax:+86- 021-50791141/2/3-8000 Website: http://www.ta-shanghai.com E-mail: xu [email protected] OTA Test Report Report No: Y2102A0260-T3 TA Technology (Shanghai) Co., Ltd. TA-MB-04-008O P age 4 of 13 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. 1.4. Laboratory Environment Temperature Min. =19°C，Max. = 25°C Relative humidity Min. =40%，Max. =72% Shield effect 0.7-6GHz >100dB Ground resistance <0.5 OTA Test Report Report No: Y2102A0260-T3 TA Technology (Shanghai) Co., Ltd. TA-MB-04-008O P age 5 of 13 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. 2. General Description of Equipment under Test 2.1. Applicant and Manufacturer Information Applicant Name Espressif System (Shanghai) Co.,Ltd Applicant address Suite 204 Block 2, 690 Bibo Road, Zhang Jiang Hi-Tech Park, Shanghai, China Manufacturer Name Espressif System (Shanghai) Co.,Ltd Manufacturer address Suite 204 Block 2, 690 Bibo Road, Zhang Jiang Hi-Tech Park, Shanghai, China 2.…

Text truncated - open the document above for the full version.