2BXPX-YJ460Remote control toy airplane

460 10000张 1.飞机电池电量低、飞机灯条闪烁提示、遥控器红绿灯 对闪蜂呜器“嘀、嘀”报警提示。 2.用户需自备USA电源适配器，或者连接电脑USB插座。 3.将专用的USB充电器与电源适配器进行连接，此时USB 充电指标灯不亮。 4.电池与分压充电头与USB充电器进行连接，此时USB充 电器红灯闪烁，充电进行中。 5.当USB充电器红灯灭，充电完成。 1.Low battery power on the aircraft, flashing light strips on the aircraft, and a "beep, beep" alarm from the remote control's traffic light flashing buzzer. 2. Users need to bring their own USB power adapter, orconnect to a computer USB to reset. 3.Connect the dedicated USB charger to the poweradapter, and the USB charging indicator will not light up atthis time. 4. Connect the battery and the voltage divider charger to the USB charger. At this time, the red light of the USB charger remains on constantly, and charging is in progress. 5.When the red light of the USB charger goes out,charging is complete. 3.7V 200mAh 电池 3.7V 200mAh battery FCC Warnning: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 0cm between the radiator and your body.

FCC ID: 2BXPX-YJ460 External Photos of the EUT YJ460 FCC ID: 2BXPX-YJ460 YJ450 FCC ID: 2BXPX-YJ460 FCC ID: 2BXPX-YJ460 FCC ID: 2BXPX-YJ460

Label and Location Size: L: 2.0cm*W: 1.0cm Label and Location FCC ID: 2BXPX-YJ460

FCC ID: 2BXPX-YJ460 Internal Photos of the EUT FCC ID: 2BXPX-YJ460 FCC ID: 2BXPX-YJ460 Antenna

Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao'an District, Shenzhen, China Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao'an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn RF Exposure evaluation Report Reference No. .................... : FCC ID. ........................................... : CTA26080300302 2BXPX-YJ460 Compiled by ( position+printed name+signature) . : File administrators Zoey Cao Supervised by ( position+printed name+signature) . : Project Engineer Ace Chai Approved by ( position+printed name+signature) . : RF Manager Eric Wang Date of issue .................................... : Aug. 10, 2026 Testing Laboratory Name ............. : Shenzhen CTA Testing Technology Co., Ltd. Address ........................................... : Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao'an District, Shenzhen, China Applicant’s name ........................... : Jinhua Yanjie Technology Co., Ltd. Address ........................................... : No. 3 Building, 2nd Floor, 535 Yufang Road, Lowtai Industrial Zone, Xiaoshang Town, Jindong District, Jinhua City, Zhejiang Province, China Standard .......................................... : 47CFR §1.1310 47CFR §2.1093 KDB447498 D01 General RF Exposure Guidance v06 Shenzhen CTA Testing Technology Co., Ltd. All rights reserved. This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen CTA Testing Technology Co., Ltd. is acknowledged as copyright owner and source of the material. Shenzhen CTA Testing Technology Co., Ltd. takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and contet. Test item description ..................... : Remote control toy airplane Trade Mark ....................................... : Yan Jie Manufacturer .................................... : Jinhua Yanjie Technology Co., Ltd. Model/Type reference ...................... : YJ460 Listed Models ................................... : YJ450 Ratings ............................................. : DC 6.0V From battery Result ............................................... : PASS Report No.: CTA26080300302 Page 2 of 8 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao'an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn T E S T R E P O R T Equipment under Test : Remote control toy airplane Model /Type : YJ460 Listed Models : YJ450 Model Difference : Transmitter (remote control) PCB board, circuit, structure and internal of these model(s) are the same, Only model number and receiver (toy plane) are different for these models. The detailed information refer to product photos. Risk Assessment andTest Coverage Statement : According to FCC standards, FCC ID certification only requires testing the Transmitter part of the product, not the receiver part. Referring to the product photos, For the main test and Listed models. The transmitter is the same, so the test results for the main test can cover the Listed models Applicant : Jinhua Yanjie Technology Co., Ltd. Address : No. 3 Building, 2nd Floor, 535 Yufang Road, Lowtai Industrial Zone, Xiaoshang Town, Jindong District, Jinhua City, Zhejiang Province, China Manufacturer : Jinhua Yanjie Technology Co., Ltd. Address : No. 3 Building, 2nd Floor, 535 Yufang Road, Lowtai Industrial Zone, Xiaoshang Town, Jindong District, Jinhua City, Zhejiang Province, China Test Result: PASS The test report merely corresponds to the test sample. It is not permitted to copy extracts of these test result without the written permission of the test laboratory. Report No.: CTA26080300302 Page 3 of 8 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao'an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn Contents 1 TEST STANDARDS ............................................................................................................ 4 2 SUMMARY .......................................................................................................................... 5 2.1 General Remarks ..................................................................................................... 5 2.2 Product Description ................................................................................................. 5 2.3 Special Accessories ................................................................................................. 5 2.4 Modifications ............................................................................................................ 5 3 TEST ENVIRONMENT ....................................................................................................... 6 3.1 Address of the test laboratory .................................................................................. 6 3.2 Test Facility .............................................................................................................. 6 3.3 Statement of the measurement uncertainty ............................................................. 6 4 Test limit .............................................................................................................................. 7 4.1 Requirement ............................................................................................................ 7 4.2 Conducted Power Results ....................................................................................... 7 4.3 Manufacturing tolerance .......................................................................…

Text truncated - open the document above for the full version.

Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao'an District, Shenzhen, China TEST REPORT FCC Rules and Regulations Part PART 15.249 Report Reference No..............: CTA26080300301 FCC ID...................................: 2BXPX-YJ460 Compiled by ( position+printed name+signature ... : File administrators Zoey Cao Supervised by ( position+printed name+signature ... : Project Engineer Ace Chai Approved by ( position+printed name+signature ... : RF Manager Eric Wang Date of issue .................................... : Aug. 10, 2026 Testing Laboratory Name .............. : Shenzhen CTA Testing Technology Co., Ltd. Address ............................................ : Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao'an District, Shenzhen, China Applicant’s name ............................ : Jinhua Yanjie Technology Co., Ltd. Address ............................................ : No. 3 Building, 2nd Floor, 535 Yufang Road, Lowtai Industrial Zone, Xiaoshang Town, Jindong District, Jinhua City, Zhejiang Province, China Standard ........................................... : FCC Rules and Regulations PART 15.249 Shenzhen CTA Testing Technology Co., Ltd. All rights reserved. This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen CTA Testing Technology Co., Ltd. is acknowledged as copyright owner and source of the material. Shenzhen CTA Testing Technology Co., Ltd. takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. Test item description ..................... : Remote control toy airplane Trade Mark ....................................... : Yan Jie Manufacturer .................................... : Jinhua Yanjie Technology Co., Ltd. Model/Type reference ...................... : YJ460 Listed Models .................................. : YJ450 Modulation ....................................... : GFSK Frequency ......................................... 2433-2474MHz Ratings ............................................. : DC 6.0V From battery Result ............................................... : PASS Report No.: CTA26080300301 Page 2 of 35 T E S T R E P O R T Equipment under Test : Remote control toy airplane Model /Type : YJ460 Listed Models : YJ450 Model Difference : Transmitter (remote control) PCB board, circuit, structure and internal of these model(s) are the same, Only model number and receiver (toy plane) are different for these models. The detailed information refer to product photos. Risk Assessment andTest Coverage Statement : According to FCC standards, FCC ID certification only requires testing the Transmitter part of the product, not the receiver part. Referring to the product photos, For the main test and Listed models. The transmitter is the same, so the test results for the main test can cover the Listed models Applicant : Jinhua Yanjie Technology Co., Ltd. Address : No. 3 Building, 2nd Floor, 535 Yufang Road, Lowtai Industrial Zone, Xiaoshang Town, Jindong District, Jinhua City, Zhejiang Province, China Manufacturer : Jinhua Yanjie Technology Co., Ltd. Address : No. 3 Building, 2nd Floor, 535 Yufang Road, Lowtai Industrial Zone, Xiaoshang Town, Jindong District, Jinhua City, Zhejiang Province, China Test Result: PASS The test report merely corresponds to the test sample. It is not permitted to copy extracts of these test result without the written permission of the test laboratory. Report No.: CTA26080300301 Page 3 of 35 Contents 1. 0BT E S T S T A N D A R D S ................................................................. 4 2. 1BS U M M A R Y ............................................................................ 5 2.1. General Remarks 5 2.2. 7BProduct Description 5 2.3. 8BEquipment Under Test 5 2.4. 9BShort description of the Equipment under Test (EUT) 5 2.5. EUT configuration 5 2.6. 10BEUT operation mode 6 2.7. 11BBlock Diagram of Test Setup 6 2.8. Modifications 6 3. 2BT E S T E N V I R O N M E N T .............................................................. 7 3.1. Address of the test laboratory 7 3.2. Test Facility 7 3.3. 17BEnvironmental conditions 7 3.4. 18BSummary of measurement results 8 3.5. Statement of the measurement uncertainty 8 3.6. 20BEquipments Used during the Test 9 4. 3BT E S T C O N D I T I O N S A N D R E S U L T S ........................................... 11 4.1. 21BAC Power Conducted Emission ................................................................................... 11 4.2. Radiated Emission and Band Edges ............................................................................ 12 4.3. 20dB Bandwidth Measurement .................................................................................... 19 4.4. Emissions at Restricted Band....................................................................................... 21 4.5. On Time and Duty Cycle .............................................................................................. 25 4.6. 31BAntenna Requirement ................................................................................................... 27 5. 4BT E S T S E T U P P H O T O S O F T H E E U T .......................................... 28 6. 4BT E S T P H O T O S O F T H E E U T .................................................... 29 Report No.: CTA26080300301 Page 4 of 35 1. 0BT E S T S T A N D A R D S The tests were performed according to following standards: FCC Rules Part 15.249: Operation within the bands 902 - 928 MHz, 2400 - 2483.5 MHz, 5725 - 5875 MHz, and 24.0 - 24.25 GHz. ANSI C63.10-2020+Cor. 1-2023+C63.10a-2024 + Errata to C63.10a-2024: American National Standard for Testing Unlicensed Wireless Devices Report No.: CTA26080300301 Page 5 of 35 2. 1BSU M M A R Y 2.1. General Remarks Date of receipt of test sample…

Text truncated - open the document above for the full version.

1. Antenna Description: Antenna type PCB antenna Model YJ460 Frequency range 2400-2500MHz Manufacturer Jinhua Yanjie Technology Co., Ltd. Address No. 3 Building, 2nd Floor, 535 Yufang Road, Lowtai Industrial Zone, Xiaoshang Town, Jindong District, Jinhua City, Zhejiang Province, China ANT Peak Gain 0.21 dBi 2. Antenna Photo: 3. Test Equipment & Conditions 3.1 Test instrument VSWR is tested using Agilent E5071B connected to a hand mechanism, and the status is free space. 3.2 Test environment and methods 4．Antenna Radiation Pattern 2400MHz 2450MHz 2500MHz

FCC ID: 2BXPX-YJ460 Test Setup Photos of the EUT