A2F-PB100GSM 850/1900 DUAL BAND MOBILE

PB100 User Manual Keys Specification 1.1 Keys specification General keypad definitions: Left soft key Generally indicates Confirmation Right soft key Generally to delete or clear a letter or number. Navigation key Generally to move the cursor. #key Switch between different input methods. *key show the Symbols interface. Call key Generally to call the number. End key Generally to end a call. 1 key ,.?!1 2 key ABC,abc,2 3 key DEF, def.3 4 key GHI, ghi, 4 5 key JKL, jkl, 5 6 key MNO, mno, 6 7 key PQSR, pqsr, 7 8 key TUV, tuv, 8 9 key WXYZ, wxyz, 9 0 key 0, space 2 User Guide 2.1 Installing/ Removing the battery/SIM card. Installation Notice Before you install or remove the battery and the SIM card, please make sure to turn off the mobile phone. 1) Removing the battery. Step1: Step2: • Remove the back cover. • Remove the battery from the battery slot properly. 2) Inserting/Removing the SIM card. Step3: • Insert/Remove the SIM card. Step4: • Insert the battery • Place the Back cover on. 2.2 Charging the battery • Plug the charger into the electrical outlet. • Plug the charger connector into the mobile phone • The Battery indicator icon starts to flash until charging is finished. • When charging is complete, disconnect the charger connector from the mobile phone and unplug the charger from electrical outlet. 2.3 Flashlight This mobile phone has a flashlight function. In idle state, long press the middle key to turn on the flashlight and when the flashlight is on and your on the Idle state, press the middle key to turn off the flashlight. 2.4 Power On or Off Make sure the battery is already inserted: • Power on/off: Long Press the End key to Switch on/off the mobile phone. 3 Call Functions 3.1 Making a Call • On idle state, input the phone number directly • Press the Call key to make a call. • You can input number in this order: (Area code, phone number, and press the Call key) 3.2 Emergency Calls You can make emergency calls as long as your current location is covered by the network area. You can check the signal strength bar on the top left corner of the screen. 3.3 Dialing an International Number Making International calls: For international calls, long press the “0” key until the “+” sign is shown in the screen then enter the number in the following order: (“+”, Country code, complete number then press the Call key) 3.4 Rejecting a Call Press the End key to Reject or cancel an incoming call. 3.5 Missed Calls The unanswered incoming calls appear on the display screen. Press Middle key to check the details of the missed calls or press Call key to call the number. 3.6 Call Waiting In this menu, you can activate the call waiting function to be notified of incoming calls while you have a call in progress. 3.7 Call Options Press the left soft key or the middle key to perform the following options: • Mute: turn on/off microphone. • Loudspeaker: turn on/off the loudspeaker function. • Speaker volume: change the speaker volume. • Hold/Remove hold: Put a call on hold or retrieve a call. • Contacts: enter phonebook menu. • Messages: enter message menu. 4 Alarms To set an alarm clock, Select alarm then press left soft key and choose from once, Daily, weekly or workday alarm to set the period that it will alarm and then edit its time, date and ring tone. 5 Profiles Profiles options: General, Meeting, Outdoor, Indoor and Headset. Select and enter personal settings menu, profile modification are as follows: • Tone setup: lets you specify the ring tone for incoming calls and alerts. • Volume setup: set the volume of the Ring tone, Speaker volume and Key tone. • Alert type: set the ring tone type. 6 Call center • All calls: lists of the missed, dialed and received calls. • Missed Calls: lists the records of missed calls. • Received Calls: lists the records of received calls. • Dialed Calls: lists the records of dialed calls. • Call Time: four sub-menus are provided in Call Duration: Last Call, Dialed Calls, Received Calls and Reset all time. • Call settings: - IP Number: The mobile phone support IP dial function. - Call firewall: set the number in the Call firewall list to reject the incoming call(s) of the contact that was set in the Call firewall list, - Barred dial: to restrict calls ƒ International Calls: restrict international calls. ƒ All expect home: restrict all the calls except your home number. ƒ Incoming Calls: restrict the Incoming of calls ƒ Incoming if abroad: restrict the Incoming calls if your abroad. ƒ Outgoing Calls: restrict outgoing calls. ƒ Cancel All Barring: cancel all the active barred function. - CLIR: set the call ID to set by network, Hide ID or Send ID. - Call time reminder: Allow the user to limit the duration of a call. - Connected reminder: turn on/off this function. - Call Waiting: You can activate it to be notified of incoming calls while you have a call in progress. - Call Divert: The call diversion network service permits you to divert an incoming call to another number (designated by you). Select from the options (Divert all voice calls, Divert if unreachable, Divert if no answer, Divert if busy, Divert all data calls and Cancel all divert.) ƒ Divert all voice calls: divert incoming calls to another number. ƒ If out of reach: divert incoming calls to another number if you cannot be reached. ƒ If busy: divert incoming calls to another number when your mobile phone network is busy. ƒ If no answer: divert incoming calls to another number after you phone rings for a specified time without answering. ƒ Cancel all diverts: cancel all the active divert call function. 7 Contacts • Add new contact: add a new contact to SIM or phone. • Edit: edit the phonebook details. • Delete: delete the contact details. • Search: input the name you want to search. • IP dial: The mobile phone support IP dial function and set the IP number first. • View: view the contact details • Send a message: send a text message to the selected contact. • Send name card: send the name and number of the selecte…

Text truncated - open the document above for the full version.

Pengbo Telcom (H.K) Limited Adds: Room#F,10th Floor,Meyer Industrial Building 2 Chong Yip St. Kwun Tong, Kowloon Hongkong Date: Nov 21 th , 2011 Federal Communications Commission Office of Engineering and Technology Equipment Authorization Division 7345 Oakland Mills Road Columbia, Maryland 21046 Subject: Permanent Confidentiality request for FCC ID: A2F-PB100 To Whom It May Concern, Pursuant to sections 0.457 and 0.459 of CFR 47, the applicant requests permanent confidential treatment of the following information accompanying this application: - Block Diagram - Schematics - Operational Description - BOM list/Tune-Up-Procedure The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the applicant and provide unjustified benefits to its competitors. Yours Sincerely, YaBo.Zhang. General Manager Pengbo Telcom (H.K) Limited Telephone: 86-13825210005 E-mail: [email protected]

PB100 external photo

PB100 Internal photo

Report No.: RZA1111-1844SAR Page 1 of 98 TESTING No. L2264 OET 65 TEST REPORT Product Name GSM 850/1900 dual band mobile Model PB100 FCC ID A2F-PB100 Client Pengbo Telcom (H.K) Limited. TA Technology (Shanghai) Co., Ltd. TA Technology (Shanghai) Co., Ltd. Test Report Report No.: RZA1111-1844SAR Page 2 of 98 GENERAL SUMMARY Product Name GSM 850/1900 dual band mobile Model PB100 FCC ID A2F-PB100 Report No. RZA1111-1844SAR Client Pengbo Telcom (H.K) Limited. Manufacturer MINGYI Reference Standard(s) IEEE Std C95.1, 1999: IEEE Standard for Safety Levels with Respect to Human Exposure to Radiofrequency Electromagnetic Fields, 3 kHz to 300 GHz. IEEE Std 1528™-2003: IEEE Recommended Practice for Determining the Peak Spatial-Average Specific Absorption Rate (SAR) in the Human Head from Wireless Communications Devices: Measurement Techniques. SUPPLEMENT C Edition 01-01 to OET BULLETIN 65 Edition 97-01 June 2001 including DA 02-1438, published June 2002: Evaluating Compliance with FCC Guidelines for Human Exposure to Radiofrequency Electromagnetic Fields Additional Information for Evaluation Compliance of Mobile and Portable Devices with FCC Limits for Human Exposure to Radiofrequency Emissions. Conclusion This portable wireless equipment has been measured in all cases requested by the relevant standards. Test results in Chapter 7 of this test report are below limits specified in the relevant standards. General Judgment: Pass (Stamp) Date of issue: November 21 st , 2011 Comment The test result only responds to the measured sample. Approved by Director Revised by SAR Manager Performed by SAR Engineer TA Technology (Shanghai) Co., Ltd. Test Report Report No.: RZA1111-1844SAR Page 3 of 98 TABLE OF CONTENT 1. General Information ..................................................................................................................... 5 1.1. Notes of the Test Report.......................................................................................................5 1.2. Testing Laboratory ................................................................................................................ 5 1.3. Applicant Information ............................................................................................................ 6 1.4. Manufacturer Information ...................................................................................................... 6 1.5. Information of EUT................................................................................................................ 7 1.6. The Maximum SAR 1g Values ................................................................................................ 8 1.7. The Maximum Power of Each Tested Mode ......................................................................... 8 1.8. Test Date .............................................................................................................................. 8 2. Operational Conditions during Test ..............................................................................................9 2.1. General Description of Test Procedures ............................................................................... 9 2.2. GSM Test Configuration ........................................................................................................ 9 2.3. Test Positions........................................................................................................................ 9 2.3.1. Against Phantom Head .................................................................................................. 9 2.3.2. Body Worn Configuration............................................................................................... 9 3. SAR Measurements System Configuration ................................................................................ 10 3.1. SAR Measurement Set-up .................................................................................................. 10 3.2. DASY5 E-field Probe System ............................................................................................. 11 3.2.1. EX3DV4 Probe Specification ....................................................................................... 11 3.2.2. E-field Probe Calibration .............................................................................................. 12 3.3. Other Test Equipment .........................................................................................................12 3.3.1. Device Holder for Transmitters .................................................................................... 12 3.3.2. Phantom...................................................................................................................... 13 3.4. Scanning Procedure........................................................................................................... 13 3.5. Data Storage and Evaluation .............................................................................................. 15 3.5.1. Data Storage................................................................................................................ 15 3.5.2. Data Evaluation by SEMCAD ...................................................................................... 15 3.6. System Check..................................................................................................................... 18 3.7. Equivalent Tissues ..............................................................................................................19 4. Laboratory Environment............................................................................................................. 20 5. Characteristics of the Test .......................................................................................................... 20 5.1. Applicable Limit Regulations ............................................................................................... 20 5.2. Applicable Me…

Text truncated - open the document above for the full version.

TA Technology (Shanghai) Co., Ltd. Test Report Report No.: RZA1111-1844SAR Page 83 of 98 TA Technology (Shanghai) Co., Ltd. Test Report Report No.: RZA1111-1844SAR Page 84 of 98 TA Technology (Shanghai) Co., Ltd. Test Report Report No.: RZA1111-1844SAR Page 85 of 98 TA Technology (Shanghai) Co., Ltd. Test Report Report No.: RZA1111-1844SAR Page 86 of 98 TA Technology (Shanghai) Co., Ltd. Test Report Report No.: RZA1111-1844SAR Page 87 of 98 TA Technology (Shanghai) Co., Ltd. Test Report Report No.: RZA1111-1844SAR Page 88 of 98 TA Technology (Shanghai) Co., Ltd. Test Report Report No.: RZA1111-1844SAR Page 89 of 98 ANNEX G: DAE4 Calibration Certificate TA Technology (Shanghai) Co., Ltd. Test Report Report No.: RZA1111-1844SAR Page 90 of 98 TA Technology (Shanghai) Co., Ltd. Test Report Report No.: RZA1111-1844SAR Page 91 of 98 TA Technology (Shanghai) Co., Ltd. Test Report Report No.: RZA1111-1844SAR Page 92 of 98 TA Technology (Shanghai) Co., Ltd. Test Report Report No.: RZA1111-1844SAR Page 93 of 98 TA Technology (Shanghai) Co., Ltd. Test Report Report No.: RZA1111-1844SAR Page 94 of 98 ANNEX H: The EUT Appearances and Test Configuration a: EUT b: Battery Picture 6: Constituents of EUT TA Technology (Shanghai) Co., Ltd. Test Report Report No.: RZA1111-1844SAR Page 95 of 98 Picture 7: Left Hand Touch Cheek Position Picture 8: Left Hand Tilt 15 Degree Position TA Technology (Shanghai) Co., Ltd. Test Report Report No.: RZA1111-1844SAR Page 96 of 98 Picture 9: Right Hand Touch Cheek Position Picture 10: Right Hand Tilt 15 Degree Position TA Technology (Shanghai) Co., Ltd. Test Report Report No.: RZA1111-1844SAR Page 97 of 98 Picture 11: Body, The EUT display towards ground, the distance from handset to the bottom of the Phantom is 15mm Picture 12: Body, The EUT display towards phantom, the distance from handset to the bottom of the Phantom is 15mm 15mm 15mm TA Technology (Shanghai) Co., Ltd. Test Report Report No.: RZA1111-1844SAR Page 98 of 98 Picture 13: Body with earphone, The EUT display towards ground, the distance from handset to the bottom of the Phantom is 15mm 15mm

Report No.: RZA1111-1844RF01R1 Page 1of 33 TESTING No. L2264 Part 22 TEST REPORT Product Name GSM 850/1900 dual band mobile Model Name PB100 FCC ID A2F-PB100 Client Pengbo Telcom (H.K) Limited. TA Technology (Shanghai) Co., Ltd. TA Technology (Shanghai) Co., Ltd. Test Report Report No.: RZA1111-1844RF01R1 Page 2of 33 GENERAL SUMMARY Product Name GSM 850/1900 dual band mobile Model Name PB100 FCC ID A2F-PB100 Report No. RZA1111-1844RF01R1 Client Pengbo Telcom (H.K) Limited. Manufacturer MINGYI Reference Standard(s) FCC CFR47 Part 2 (2010-12) Frequency Allocations And Radio Treaty Matters; General Rules And Regulations FCC CFR 47 Part 22H (2010-12) Public Mobile Services(850MHz) ANSI/TIA-603-C(2004) Land mobile FM or PM Communications Equipment Measurements and Performance Standards. Conclusion This portable wireless equipment has been measured in all cases requested by the relevant standards. Test results in Chapter 2 of this test report are below limits specified in the relevant standards. General Judgment: Pass (Stamp) Date of issue: November 24 th , 2011 Comment The test result only responds to the measured sample. Approved by Director Revised by RF Manager Performed by RF Engineer TA Technology (Shanghai) Co., Ltd. Test Report Report No.: RZA1111-1844RF01R1 Page 3of 33 TABLE OF CONTENT 1. General Information ..................................................................................................................... 4 1.1. Notes of the test report.........................................................................................................4 1.2. Testing laboratory .................................................................................................................4 1.3. Applicant Information ............................................................................................................5 1.4. Manufacturer Information ......................................................................................................5 1.5. Information of EUT................................................................................................................6 1.6. Test Date ..............................................................................................................................7 2. Test Information ........................................................................................................................... 8 2.1. Summary of test results ........................................................................................................8 2.2. RF Power Output ..................................................................................................................9 2.3. Effective Radiated Power.................................................................................................... 11 2.4. Occupied Bandwidth...........................................................................................................14 2.5. Band Edge Compliance......................................................................................................17 2.6. Frequency Stability .............................................................................................................20 2.7. Spurious Emissions at Antenna Terminals .........................................................................22 2.8. Radiates Spurious Emission ...............................................................................................26 3. Main Test Instruments .......................................................................................................... ...... 31 ANNEX A: EUT Appearance and Test Setup..................................................................................... 32 A.1 EUT Appearance ................................................................................................................32 A.2 Test Setup ...........................................................................................................................33 TA Technology (Shanghai) Co., Ltd. Test Report Report No.: RZA1111-1844RF01R1 Page 4of 33 1. General Information 1.1. Notes of the test report TA Technology (Shanghai) Co., Ltd. guarantees the reliability of the data presented in this test report, which is the results of measurements and tests performed for the items under test on the date and under the conditions stated in this test report and is based on the knowledge and technical facilities available at TA Technology (Shanghai) Co., Ltd. at the time of execution of the test. TA Technology (Shanghai) Co., Ltd. is liable to the client for the maintenance by its personnel of the confidentiality of all information related to the items under test and the results of the test. This report only refers to the item that has undergone the test. This report standalone dose not constitute or imply by its own an approval of the product by the certification Bodies or competent Authorities. This report cannot be used partially or in full for publicity and/or promotional purposes without previous written approval of TA Technology (Shanghai) Co., Ltd. and the Accreditation Bodies, if it applies. If the electrical report is inconsistent with the printed one, it should be subject to the latter. 1.2. Testing laboratory Company: TA Technology (Shanghai) Co., Ltd. Address: No.145, Jintang Rd, Tangzhen Industry Park, Pudong City: Shanghai Post code: 201201 Country: P. R. China Contact: Yang Weizhong Telephone: +86-021-50791141/2/3 Fax: +86-021-50791141/2/3-8000 Website: http://www.ta-shanghai.com E-mail: [email protected] TA Technology (Shanghai) Co., Ltd. Test Report Report No.: RZA1111-1844RF01R1 Page 5of 33 1.3. Applicant Information Company: Pengbo Telcom (H.K) Limited. Address: Room#F,10th Floor,Meyer Industrial Building 2 Chong Yip St. Kwun Tong, Kowloon Hongkong City: Hongkong Postal Code: / Country: P.R. China Contact: YaBo.Zhang Telephone: 86-13825210005 Fax: 0755-25267272 1.4. Manufacturer …

Text truncated - open the document above for the full version.

Report No.: RZA1111-1844RF02R1 Page 1of 36 TESTING No. L2264 Part 24 TEST REPORT Product Name GSM 850/1900 dual band mobile Model Name PB100 FCC ID A2F-PB100 Client Pengbo Telcom (H.K) Limited. TA Technology (Shanghai) Co., Ltd. TA Technology (Shanghai) Co., Ltd. Test Report Registration Num:428261 Report No.: RZA1111-1844RF02R1 Page 2of 36 GENERAL SUMMARY Product Name GSM 850/1900 dual band mobile Model Name PB100 FCC ID A2F-PB100 Report No. RZA1111-1844RF02R1 Client Pengbo Telcom (H.K) Limited. Manufacturer MINGYI Reference Standard(s) FCC CFR47 Part 2 (2010-12) Frequency Allocations And Radio Treaty Matters; General Rules And Regulations FCC CFR47 Part 24E (2010-12) Personal Communications Services ANSI/TIA-603-C(2004) Land mobile FM or PM Communications Equipment Measurements and Performance Standards. Conclusion This portable wireless equipment has been measured in all cases requested by the relevant standards. Test results in Chapter 2 of this test report are below limits specified in the relevant standards. General Judgment: Pass (Stamp) Date of issue: November 24 th , 2011 Comment The test result only responds to the measured sample. Approved by Director Revised by RF Manager Performed by RF Engineer TA Technology (Shanghai) Co., Ltd. Test Report Registration Num:428261 Report No.: RZA1111-1844RF02R1 Page 3of 36 TABLE OF CONTENT 1. General Information ..................................................................................................................... 4 1.1. Notes of the test report.........................................................................................................4 1.2. Testing laboratory .................................................................................................................4 1.3. Applicant Information ............................................................................................................5 1.4. Manufacturer Information ......................................................................................................5 1.5. Information of EUT................................................................................................................6 1.6. Test Date ..............................................................................................................................7 2. Test Information ........................................................................................................................... 8 2.1. Summary of test results ........................................................................................................8 2.2. RF Power Output ..................................................................................................................9 2.3. Effective Isotropic Radiated Power ..................................................................................... 11 2.4. Occupied Bandwidth...........................................................................................................14 2.5. Band Edge Compliance......................................................................................................17 2.6. Frequency Stability .............................................................................................................20 2.7. Spurious Emissions at Antenna Terminals .........................................................................22 2.1. Radiates Spurious Emission ...............................................................................................29 3. Main Test Instruments .......................................................................................................... ...... 34 ANNEX A: EUT Appearance and Test Setup..................................................................................... 35 A.1 EUT Appearance ................................................................................................................35 A.2 Test Setup ...........................................................................................................................36 TA Technology (Shanghai) Co., Ltd. Test Report Registration Num:428261 Report No.: RZA1111-1844RF02R1 Page 4of 36 1. General Information 1.1. Notes of the test report TA Technology (Shanghai) Co., Ltd. guarantees the reliability of the data presented in this test report, which is the results of measurements and tests performed for the items under test on the date and under the conditions stated in this test report and is based on the knowledge and technical facilities available at TA Technology (Shanghai) Co., Ltd. at the time of execution of the test. TA Technology (Shanghai) Co., Ltd. is liable to the client for the maintenance by its personnel of the confidentiality of all information related to the items under test and the results of the test. This report only refers to the item that has undergone the test. This report standalone dose not constitute or imply by its own an approval of the product by the certification Bodies or competent Authorities. This report cannot be used partially or in full for publicity and/or promotional purposes without previous written approval of TA Technology (Shanghai) Co., Ltd. and the Accreditation Bodies, if it applies. If the electrical report is inconsistent with the printed one, it should be subject to the latter. 1.2. Testing laboratory Company: TA Technology (Shanghai) Co., Ltd. Address: No.145, Jintang Rd, Tangzhen Industry Park, Pudong City: Shanghai Post code: 201201 Country: P. R. China Contact: Yang Weizhong Telephone: +86-021-50791141/2/3 Fax: +86-021-50791141/2/3-8000 Website: http://www.ta-shanghai.com E-mail: [email protected] TA Technology (Shanghai) Co., Ltd. Test Report Registration Num:428261 Report No.: RZA1111-1844RF02R1 Page 5of 36 1.3. Applicant Information Company: Pengbo Telcom (H.K) Limited. Address: Room#F,10th Floor,Meyer Industrial Building 2 Chong Yip St. Kwun Tong, Kowloon Hongkong City: Hongkong Postal Code: / Country: P…

Text truncated - open the document above for the full version.

PB100 FCC test setup photo 1. RSE