A3L-DRMODEMZ1DR-Ready Modem

DR-Ready modem User manual imagine the possibilities Thank you for purchasing this Samsung product. To receive a more complete service, please register your product at www.samsung.com/register WARNING The DR-Ready modem only works for the following Samsung models. Since the modem can only be installed in the following models, please confirm that your product is one of the following models. • Refrigerator: RF4289HARS, RSG309AARS • Washer/Dryer: WF461ASP/XAA / DV431ASP/XAA • Dishwasher: DMT-611 WheN INstAllING youR DR-ReADy moDem Do not install the modem on an unstable surface. • If the product falls, it may result in injury or damage to property. Do not install the modem near a heater, volatile substance (oil, etc.) or inflammable material. • This may result in electric shock or fire. Do not install the modem in a humid or dusty location, a location exposed to direct sunlight water (rain drops, etc.), or a location where gas may leak. • This may result in electric shock or fire. To reinstall the modem, contact the service center. WheN usING youR DR-ReADy moDem Do not connect the DR-Ready modem to an incompatible product. • This may result in a problem or product malfunction. If the modem generates a strange sound, smell or smoke, remove the modem from the product immediately, disconnect the LAN cable and contact the service center. • Failing to do so may result in electric shock or fire. If the modem becomes flooded, immediately remove the modem from the product, disconnect the LAN cable and contact the service center. • This may result in electric shock or fire. If water or a foreign object enters the modem, immediately remove the modem from the product (refrigerator, washer or dishwasher), disconnect the LAN cable and contact the service center. • Failing to do so may result in electric shock or fire. Do not touch the modem or LAN cable with wet hands. • This may result in electric shock, fire or injury. Do not intentionally apply excessive force to the modem. • This may result in a problem with or damage to the product. Do not disassemble, repair or modify the modem yourself. • This may result in electric shock, fire, damage to the product or injury. Do not step on the modem or place an object (laundry, lighted candle, lighted cigarette, dish, chemical, metal object, etc.) on the modem. • This may result in a problem with or damage to the product. Do not use a sharp object with the modem. • This may result in a problem with or damage to the product. CeRtIfICAtIoN • FCC: A3L-DRMODEMZ1 • ZigBee: ZIG11004ZSE26067-24 CheCkING the pARts Power Front panelRear panel Packaging contents DR-Ready modem (1) 1.5 m direct LAN cable (1) User manual (1) Since there is a magnet at the bottom of the modem, you can easily fix it to the metal part of the product. INstAllING youR DR-ReADy moDem IN youR RefRIGeRAtoR DR-port 1. Enter the MAC and PIN numbers on the label attached to the bottom of the modem into your DRC. (For the procedures to enter the MAC and PIN numbers, refer to the DRC user manual.) 2. Open the rubber cover of the DR-port at the back of your refrigerator and connect the LAN cable supplied with the modem to the DR-port. For the exact position of the DR-port, refer to the user manual for the corresponding refrigerator. 3. Close the cover. 4. Connect the other end of the direct LAN cable to the Host I/F port of the modem. 5. Check the connection. (Refer to the “Confirming the connection” section.) 6. Attach the modem to the top or side of the refrigerator. INstAllING youR DR-ReADy moDem IN youR WAsheR oR DRyeR DR-port 1. Enter the MAC and PIN numbers on the label attached to the bottom of the modem into your DRC. (For the procedures to enter the MAC and PIN numbers, refer to the DRC user manual.) 2. Open the rubber cover of the DR-port at the back of your washer or dryer and connect the LAN cable supplied with the modem to the DR-port. For the exact position of the DR-port, refer to the user manual for the corresponding washer or dryer. 3. Close the cover. 4. Connect the other end of the direct LAN cable to the Host I/F port of the modem. 5. Check the connection. (Refer to the “Confirming the connection” section.) 6. Attach the modem to the top or side of the washer or dryer. INstAllING youR DR-ReADy moDem IN youR DIshWAsheR DR-port kickplate 1. Enter the MAC and PIN numbers on the label attached to the bottom of the modem into your DRC. (For the procedures to enter the MAC and PIN numbers, refer to the DRC user manual.) 2. Remove the kickplate at the bottom of your dishwasher. 3. Open the rubber cover of the DR-port at the bottom of your dishwasher and connect the LAN cable supplied with the modem to the DR-port. For the exact position of the DR-port, refer to the user manual for the corresponding dishwasher. 4. Close the cover. 5. Connect the other end of the direct LAN cable to the Host I/F port of the modem. 6. Check the connection. (Refer to the “Confirming the connection” section.) 7. Attach the modem to the bottom of the dishwasher and install the kickplate. Safety information Setting up your DR-Ready modem QUESTIONS OR COMMENTS? CouNtRyCAlloR VIsIt us oNlINe At U.S 800-SAMSUNG (800-726-7864) www.samsung.com CANADA 800-SAMSUNG (800-726-7864) www.samsung.com/ca Code No.: DC68-00000A_EN feDeRAl CommuNICAtIoN CommIssIoN INteRfeReNCe stAtemeNt This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by tu…

Text truncated - open the document above for the full version.

Federal Communications Commission Authorization and Evaluation Division Confidentiality Request FCC ID: A3L-DRMODEMZ1 Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, the Applicant hereby requests confidential treatment of information accompanying this Application as outlined below: Schematics Block Diagram The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely yours, Sang Kyung (Peter) Ra/ General Manager American QA Lab SAMSUNG Electronics America INC. E-mail : [email protected] Telephone : 310-900-5250 Fax : 310-537-5500 Schematics/ Block Diagram/ Operating description

Federal Communications Commission Authorization and Evaluation Division Power of Attorney FCC ID: A3L-DRMODEMZ1 To whom it may concern: We, the undersigned Samsung Electronics Co., Ltd. hereby authorize BV CPS (H.K.) Ltd., Taoyuan Branch of Taiwan to act on our behalf in all matters relating to all processes required in the FCC Part 15C approvals and any communication needed with the national authority. Any and all acts carried out by BV CPS (H.K.) Ltd., Taoyuan Branch of Taiwan on our behalf shall have the same effects as acts of our own. If you have any questions regarding the authorization, please don’t hesitate to contact us. Thank you! Sincerely yours, Sang Kyung (Peter) Ra /General Manager American QA Lab SAMSUNG Electronics America INC. E-mail : [email protected] Telephone : 310-900-5250 Fax : 310-537-5500

Page 1 CONSTRUCTION PHOTOS OF EUT Page 2

Label location

Page 1 CONSTRUCTION PHOTOS OF EUT Page 2

Report No.: SA110124E07A Report Format Version 4.0.0 Reference No.: SA110307E04 1 RF EXPOSURE REPORT REPORT NO.: SA110504E03 MODEL NO.: 5903-003285 FCC ID: A3L-DRMODEMZ1 ACCORDING: FCC Guidelines for Human Exposure IEEE C95.1 APPLICANT: Samsung Electronics Co., Ltd. ADDRESS: 416 Maetan-dong, Young-Tong gu, Suwon, Korea 442-742 ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Hsin Chu Laboratory LAB ADDRESS: No. 81-1, Lu Liao Keng, 9th Ling,Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan Report No.: SA110124E07A Report Format Version 4.0.0 Reference No.: SA110307E04 2 RELEASE CONTROL RECORD ISSUE NO. REASON FOR CHANGE DATE ISSUED SA110504E03 Original release June 03, 2011 Report No.: SA110504E03 Report Format Version 4.0.0 Reference No.:110217E04 3 1.CERTIFICATION PRODUCT: DR-Ready Modem BRAND NAME: SAMSUNG MODEL NO.: 5903-003285 TEST SAMPLE: MASS-PRODUCTION APPLICANT: Samsung Electronics Co., Ltd. STANDARDS: IEEE C95.1 The above equipment (Model: 5903-003285) has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report. PREPARED BY : , DATE: June 03, 2011 ( Amanda Chu, Deputy Manager ) APPROVED BY : , DATE: June 03, 2011 ( May Chen, Deputy Manager ) Report No.: SA110504E03 Report Format Version 4.0.0 Reference No.:110217E04 4 2.RF Exposure Limit LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) FREQUENCY RANGE (MHz) ELECTRIC FIELD STRENGTH (V/m) MAGNETIC FIELD STRENGTH (A/m) POWER DENSITY (mW/cm 2 ) AVERAGE TIME (minutes) LIMITS FOR GENERAL POPULATION / UNCONTROLLED EXPOSURE 300-1500 ... ... F/1500 30 1500-100,000 ... ... 1.0 30 F = Frequency in MHz 3.MPE calculation Formula Pd = (Pout*G) / (4*pi*r2) where Pd = power density in mW/cm2 Pout = output power to antenna in mW G = gain of antenna in linear scale Pi = 3.1416 R = distance between observation point and center of the radiator in cm 4.Classification The antenna of this product, under normal use condition, is at least 20cm away from the body of the user. So, this device is classified as Mobile Device. Report No.: SA110504E03 Report Format Version 4.0.0 Reference No.:110217E04 5 5.calculation result of maximum conducted power FREQUENCY BAND (MHz) MAX POWER (mW) ANTENNA GAIN (dBi) DISTANCE (cm) POWER DENSITY (mW/ cm 2 ) LIMIT (mW/cm 2 ) 2405-2480 4.2 0 20 0.001 1.00 --- END ---

Report No.: RF110504E03 1 Report Format Version 4.0.0 FCC TEST REPORT REPORT NO.: RF110504E03 MODEL NO.: 5903-003285 FCC ID: A3L-DRMODEMZ1 RECEIVED: May 04, 2011 TESTED: May 10 to 20, 2011 ISSUED: June 03, 2011 APPLICANT: Samsung Electronics Co., Ltd. ADDRESS: 416 Maetan-dong, Young-Tong gu, Suwon, Korea 442-742 ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Hsin Chu Laboratory LAB ADDRESS : No. 81-1, Lu Liao Keng, 9th Ling,Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan TEST LOCATION (1): No. 81-1, Lu Liao Keng, 9th Ling,Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan TEST LOCATION (2): No. 49, Ln. 206, Wende Rd., Shangshan Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan This test report consists of 50 pages in total. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product certification, approval, or endorsement by TAF or any government agencies. The test results in the report only apply to the tested sample. Report No.: RF110504E03 2 Report Format Version 4.0.0 Table of Contents RELEASE CONTROL RECORD........................................................................................4 1. CERTIFICATION....................................................................................................5 2. SUMMARY OF TEST RESULTS............................................................................6 2.1 MEASUREMENT UNCERTAINTY..........................................................................7 3. GENERAL INFORMATION.....................................................................................8 3.1 GENERAL DESCRIPTION OF EUT.......................................................................8 3.2 DESCRIPTION OF TEST MODES.......................................................................10 3.2.1 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL........................11 3.3 GENERAL DESCRIPTION OF APPLIED STANDARDS.......................................13 3.4 DESCRIPTION OF SUPPORT UNITS..................................................................14 3.5 CONFIGURATION OF SYSTEM UNDER TEST...................................................16 4. TEST TYPES AND RESULTS..............................................................................19 4.1 CONDUCTED EMISSION MEASUREMENT........................................................19 4.1.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT......................................19 4.1.2 TEST PROCEDURES..........................................................................................20 4.1.3 DEVIATION FROM TEST STANDARD.................................................................20 4.1.4 TEST SETUP.......................................................................................................21 4.1.5 EUT OPERATING CONDITIONS.........................................................................21 4.1.6 TEST RESULTS (MODE 1)..................................................................................23 4.1.7 TEST RESULTS (MODE 2)..................................................................................25 4.1.8 TEST RESULTS (MODE 3)..................................................................................27 4.2 RADIATED EMISSION MEASUREMENT.............................................................29 4.2.1 LIMITS OF RADIATED EMISSION MEASUREMENT...........................................29 4.2.2 TEST INSTRUMENTS..........................................................................................30 4.2.3 TEST PROCEDURES..........................................................................................31 4.2.4 DEVIATION FROM TEST STANDARD.................................................................31 4.2.5 TEST SETUP.......................................................................................................32 4.2.6 EUT OPERATING CONDITIONS.........................................................................32 4.2.7 TEST RESULTS...................................................................................................33 4.3 6dB BANDWIDTH MEASUREMENT....................................................................40 4.3.1 LIMITS OF 6dB BANDWIDTH MEASUREMENT..................................................40 4.3.2 TEST INSTRUMENTS..........................................................................................40 4.3.3 TEST PROCEDURE.............................................................................................40 4.3.4 DEVIATION FROM TEST STANDARD.................................................................40 4.3.5 TEST SETUP.......................................................................................................40 4.3.6 EUT OPERATING CONDITIONS.........................................................................40 4.3.7 TEST RESULTS...................................................................................................41 4.4 MAXIMUM PEAK OUTPUT POWER....................................................................42 4.4.1 LIMITS OF MAXIMUM PEAK OUTPUT POWER MEASUREMENT.....................42 4.4.2 INSTRUMENTS....................................................................................................42 Report No.: RF110504E03 3 Report Format Version 4.0.0 4.4.3 TEST PROCEDURES..........................................................................................42 4.4.4 DEVIATION FROM TEST STANDARD.................................................................42 4.4.5 TEST SETUP.......................................................................................................42 4.4.6 EUT OPERATING CONDITIONS.........................................................................42 4.4.7 TEST RESULTS.........................................…

Text truncated - open the document above for the full version.

1 PHOTOGRAPHS OF THE TEST CONFIGURATION CONDUCTED EMISSION TEST (MODE 1) 2 CONDUCTED EMISSION TEST (MODE 2 & MODE 3) 3 RADIATED EMISSION TEST