A3LAN900AActivity Tracker

Type E. A00295 02/2014. Rev.1.0 EI-AN900_UM_E.indb 22014-02-25 오후 6:04:28 사사 사사사 www.samsung.com Type E. A00295 02/2014. Rev.1.0 Activity Tracker EI-AN900_UM_E.indb 32014-02-25 오후 6:04:29 1 English Copyright © 2014 Samsung Electronics This device is compatible with Samsung mobile devices that have Android version 4.3 or later. • Please read this manual before using the device to ensure safe and proper use. • Descriptions are based on the device’s default settings. • This manual's images and content may differ from the product. • Some content may differ from your device depending on the software version, and is subject to change without prior notice. • This product is intended for recreational use only. This device and related software is not intended for use in the diagnosis of disease or other conditions, or in the cure, mitigation, treatment, or prevention of disease or any other medical purposes. Content found from the product and the application are for informational purposes only and is not intended to replace the relationship between you and your physician or other medical provider. Never disregard professional medical advice or delay in seeking it because of something you have learned through the product. • Keep this device out of reach of young children. English EI-AN900_UM_E.indb 12014-02-25 오후 6:04:29 2 Getting started Package contents Check the product box for the following items. The supplied items may vary depending on the region. • Activity tracker, band, clip, USB cable, and user manual Overview Indicator lights Confirm button Notification light Charging jack Slide button Charging the device Charge the device before using it for the first time, or when the device has been unused for an extended period. Detach the device from the band or the clip before charging. During charging, you cannot use the device's functions. 1 Plug the small end of the USB cable into the charging jack of the device, and then plug the large end of the USB cable to a computer or a charger. 2 When fully charged, disconnect the device from the USB cable. In the following cases, charge the device before use: • Notification light flashes red and the alarm sounds. • When pressing the Confirm button, the notification light flashes red. Use only Samsung-approved chargers, batteries, and cables. Unapproved chargers or cables can cause the battery to explode or damage the device. EI-AN900_UM_E.indb 22014-02-25 오후 6:04:29 3 English Getting started Package contents Check the product box for the following items. The supplied items may vary depending on the region. • Activity tracker, band, clip, USB cable, and user manual Overview Indicator lights Confirm button Notification light Charging jack Slide button Charging the device Charge the device before using it for the first time, or when the device has been unused for an extended period. Detach the device from the band or the clip before charging. During charging, you cannot use the device's functions. 1 Plug the small end of the USB cable into the charging jack of the device, and then plug the large end of the USB cable to a computer or a charger. 2 When fully charged, disconnect the device from the USB cable. In the following cases, charge the device before use: • Notification light flashes red and the alarm sounds. • When pressing the Confirm button, the notification light flashes red. Use only Samsung-approved chargers, batteries, and cables. Unapproved chargers or cables can cause the battery to explode or damage the device. EI-AN900_UM_E.indb 32014-02-25 오후 6:04:29 4 Charging and using time Charging timeApproximately 2 hours Using timeApproximately 3–5 days Checking the battery status Battery statusIndicator lights 1–20% 21–40% 41–60% 61–80% 81–99% 100% • Use the device after charging the battery more than 60%. • Charging time and using time may differ depending on the battery status and the conditions that the device is used in. • Check the charging status by the colour of the notification light. −Red: Charging error −Green: Charging complete • To save energy, unplug the charger when not in use. The charger does not have a power switch, so you must unplug the charger from the electric socket when not in use to avoid wasting power. The charger should remain close to the electric socket and easily accessible while charging. Attaching or detaching the device Attach or detach the device to the band or the clip. Attaching the device Align the Slide button to the band or the clip's slot, and then press the other side to firmly install it. should be on the top of the device. EI-AN900_UM_E.indb 42014-02-25 오후 6:04:29 5 English Charging and using time Charging timeApproximately 2 hours Using timeApproximately 3–5 days Checking the battery status Battery statusIndicator lights 1–20% 21–40% 41–60% 61–80% 81–99% 100% • Use the device after charging the battery more than 60%. • Charging time and using time may differ depending on the battery status and the conditions that the device is used in. • Check the charging status by the colour of the notification light. −Red: Charging error −Green: Charging complete • To save energy, unplug the charger when not in use. The charger does not have a power switch, so you must unplug the charger from the electric socket when not in use to avoid wasting power. The charger should remain close to the electric socket and easily accessible while charging. Attaching or detaching the device Attach or detach the device to the band or the clip. Attaching the device Align the Slide button to the band or the clip's slot, and then press the other side to firmly install it. should be on the top of the device. EI-AN900_UM_E.indb 52014-02-25 오후 6:04:29 6 Detaching the device From the band Twist the slot of the band to protrude the device. Then, pull the device from the slot. From the clip Twist the slot of the clip to protrude the device. Then, pull the device from the slot. Do not pull or stretch out the band or clip excessively. Doing so may …

Text truncated - open the document above for the full version.

129, Samsun g‐Ro, Yeongtong‐Gu, Suwon‐City Gyeonggi‐Do, 443‐742, Korea March 04, 2014 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road, Columbia, MD 21046 LETTER OF AUTHORIZATION To whom it may concern: I, the undersigned, hereby authorize Lab Manager Feel. Jeong (or Logan. Lee) and of SGS Korea Co., Ltd. and hereafter referred to as SGS Korea, to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by Lab Manager Feel. Jeong (or Logan. Lee) of SGS Korea Co., Ltd. on our behalf shall have the same effect as acts of our own. I, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti‐Drug Abuse Act of 1988, 21 U.S.C. 853(a). In authorizing SGS Korea as our agent, we still recognize th at we are responsible to: a) comply with the relevant provisions of the certification program; b) make all necessary arrangements for the conduct of the evaluation, including provision for examining documentation and access to all areas, records (including internal audit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment, surveillance, reassessment) and res olution of complaints; c) make claims regarding certification only in respect of the scope for which certification has been granted; d) do not use our product certification in such a manner as to bring the Certification Division into disrepute and not make any statement regarding our product certification which the Certification Division may consider misleading or unauthorized; e) upon suspension or cancellation of certification, discontinue use of all advertising matter that contains any reference thereto and return any certification documents as required by the Certification Division; f) use certification only to indicate th e products are certified as being in conformity with specified standards; g) endeavor to ensure that no certificate or report nor any part thereof is used in a misleading manner; h) ensure that any reference to our product certification in communication media such as documents, brochures or advertising, complies with the requirements of the Certification Division; 129, Samsun g‐Ro, Yeongtong‐Gu, Suwon‐City Gyeonggi‐Do, 443‐742, Korea i) keep a record of all complaints made know n to the us relating to the product’s compliance with requirements of the relevant standard and to make these records available to the Certification Division when requested; j) take appropriate action with respect to such complaints and any deficiencies found in products or services that affect compliance with the requirements for certification; k) document the actions taken. This authorization is valid until further written notice from the applicant. Sincerely Yours Sang Kyung (Peter) Ra / General Manager SAMSUNG ELECTRONICS Co., Ltd.

129, Samsun g‐Ro, Yeongtong‐Gu, Suwon‐City Gyeonggi‐ Do, 443‐742, Korea March 04, 2014 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road, Columbia, MD 21046 REQUEST OF CONFIDENTIALITY for FCC ID: A3LAN900A To Whom It May Concern: Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules (CFR 47), and Section 552 (b) (4) of the Freedom of Information Act, Samsung Electronics Co., Ltd. hereby requests confidentiality and treatment of certain information accompanying this application. The materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. We are also hereby request Short‐Term Confidentiality for 180 days after the grant as outlined in Public Notice DA 04‐1705. This provision will give Samsung Electronics Co., Ltd temporary confidentiality of commercially sensitive information prior to product release. The requested Permanent and Temporary Confidential exhibits are listed as follows: CONFIDENTIAL LIST Permanent 1 Block Diagram 2 Operational Descriptions 3 Schematics Short‐Term 4 External Photos 5 Internal Photos 6 Test‐Setup Photos 7 User Manual The Applicant understands that pursuant to Rule 0.457, disclosure of this application and all accompanying documentations, where applicable, will not be made public before the date of the Grant for this application. Sincerely Yours, Sang Kyung (Peter) Ra / General Manager SAMSUNG ELECTRONICS Co., Ltd.

Model :EI-AN900A External photos of EUT Model :EI-AN900A Side view of EUT

Label Info. FCC ID: A3LAN900A IC: 649E-EIAN900A <Rear view of EUT>

Model :EI-AN900A Internal photos of EUT Model :EI-AN900A Internal View of EUT Model :EI-AN900A Top view of Main PCB Bottom view of Main PCB Model :EI-AN900A Top view of Bluetooth(LE) Antenna Antenna

FCC ID : A3LEI-AN900A According to KDB 447498 D01 General RF Exposure Guidance v05, section 4.3.1 At 100㎒to 6㎓ and for test separation distances ≤ 50 mm, the SAR test exclusion threshold is determined according to the following a) [(max. power of channel, including tune-up tolerance,㎽) / (min. test separation distance, mm)] x [√f(GHz)] ≤ 3.0 1. SAR test exclusion threshold Frequency : 2 480㎒(min. separation distances = 5 mm) SAR test exclusion thresholds(5 mm) = (3 x 5) / √2.480 = 9.53 ㎽ Max. conducted power(㎽) SAR Test Exclusion Thresholds(5 mm) (㎽) 39.53 Peak : average ratio is 1.9㏈so maximum average power is 4.1㏈m = 2.6㎽ So, RF exposure calculation value : 3(㎽) 3(㎽) / 5(mm) x√2.480 = 0.94 Therefore, Calculation value ≤ 3.0 2. Conclusion : No SAR is required.

Report Number: F690501/RF-RTL006988-4 Page: 2 of 31 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. SGS Korea Co., Ltd. (Gunpo Laboratory) 4, LS-ro 182beon-gil, Gunpo-si, Gyeonggi-do, Korea, 435-040 http://www.sgsgroup.kr RTT5041-20(2014.01.20)(2) Tel. +82 31 428 5700 / Fax. +82 31 427 2370 A4(210mmx297mm) INDEX Table of Contents Page 1. General Information --------------------------------------------------------------------------------- 3 2. Transmitter Radiated Spurious Emissions and Conducted Spurious Emission------ 6 3. 6㏈ Bandwidth and 99% BW -------------------------------------------------------------------- 19 4. Maximum Peak Conducted Output Power ---------------------------------------------------- 24 5. Power Spectral Density ---------------------------------------------------------------------------- 27 6. Antenna Requirement ------------------------------------------------------------------------------ 31 Report Number: F690501/RF-RTL006988-4 Page: 3 of 31 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. SGS Korea Co., Ltd. (Gunpo Laboratory) 4, LS-ro 182beon-gil, Gunpo-si, Gyeonggi-do, Korea, 435-040 http://www.sgsgroup.kr RTT5041-20(2014.01.20)(2) Tel. +82 31 428 5700 / Fax. +82 31 427 2370 A4(210mmx297mm) 1. General Information 1.1. Testing Laboratory SGS Korea Co., Ltd. (Gunpo Laboratory) - Wireless Div. 3FL, 4, LS-ro 182beon-gil, Gunpo-si, Gyeonggi-do, Korea, 435-040 All SGS services are rendered in accordance with the applicable SGS conditions of service available on request and accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx. Phone No. : +82 31 428 5700 Fax No. : +82 31 427 2370 1.2. Details of Applicant Applicant : Samsung Electronics Co., Ltd. Address : 129, Samsung-ro, Yeongtong-gu, Suwon-si, Gyeonggi-do, Republic of Korea Contact Person : Choi, Han-Shil Phone No. : + 82 31 301 0827 1.3. Description of EUT Kind of Product Activity Tracker Model Name EI-AN900A Power Supply DC 3.7 V Frequency Range 2 402㎒ ~ 2 480㎒ (BT LE) Modulation Technique DSSS, GFSK Number of Channels 40 channel (BT LE) Channel separation 2㎒ Antenna Type Internal type Antenna Gain 2.03㏈i 1.4. Declaration by the manufacturer - The EUT does not do anything at charging mode. Therefore, AC conducted emission test is not necessary. Report Number: F690501/RF-RTL006988-4 Page: 4 of 31 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. SGS Korea Co., Ltd. (Gunpo Laboratory) 4, LS-ro 182beon-gil, Gunpo-si, Gyeonggi-do, Korea, 435-040 http://www.sgsgroup.kr RTT5041-20(2014.01.20)(2) Tel. +82 31 428 5700 / Fax. +82 31 427 2370 A4(210mmx297mm) 1.5. Test Equipment List Equipment Manufacturer Model S/N Cal Date Cal Interval Cal Due. Signal Generator R&S SMR40 100272 Aug. 10, 2013 Annual Aug. 10, 2014 Spectrum Analyzer Agilent N9030A US51350132 Oct. 30, 2012 Annual Oct. 30, 2013 Spectrum Analyzer R&S FSV30 100768 Mar. 28, 2013 Annual Mar. 28, 2014 Attenuator AEROFLEX / INMET 26A-10dB 3 Apr. 05, 2013 Annual Apr. 05, 2014 High Pass Filter Wainwright WHK3.0/18G-10SS 344 Jun. 08, 2013 Annual Jun. 08, 2014 High Pass Filter Wainwright WHK7.5/26.5G-6SS 11 Jun. 08, 2013 Annual Jun. 08, 2014 Low Pass Filter Mini circuits NLP-1200+ V8979400903-2 Mar. 30, 2013 Annual Mar. 30, 2014 Power Sensor R&S NRP-Z81 100669 Apr. 05. 2013 Annual Apr. 05. 2014 DC Power Supply Agilent U8002A MY50060028 Mar. 28, 2013 Annual Mar. 28, 2014 Preamplifier H.P. 8447F 2944A03909 Jun. 28, 2013 Annual Jun. 28, 2014 Preamplifier R&S SCU 18 10117 Jan. 14, 2013 Annual Jan. 14, 2014 Preamplifier MITEQ Inc. JS44-18004000-35-8P 1546891 Jun. 13, 2013 Annual Jun. 13, 2014 Test Receiver R&S ESU26 100109 Feb. 28, 2013 Annual Feb. 28, 2014 Loop Antenna R&S HFH2-Z2 100118 Jul. 12, 2013 Biennial Jul. 12, 2015 Bilog Antenna SCHWARZBECK MESSELEKTRONIK VULB9163 396 Jun. 07, 2013 Biennial Jun. 07, 2015 Horn Antenna R&S HF906 100326 Nov. 23, 2011 Biennial Nov. 23, 2013 Horn Antenna SCHWARZBECK MESSELEKTRONIK BBHA9170 BBHA9170431 May 15, 2012 Biennial May 15, 2014 Antenna Master INN-CO MM4000 N/A N/A N/A N.C.R. Turn Table INN-CO DS 1200 S N/A N/A N/A N.C.R. Anechoic Chamber SY Corporation L × W × H (9.6 m × 6.4 m × 6.6 m) N/A N/A N/A N.C.R. Report Number: F690501/RF-RTL006988-4 Page: 5 of 31 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. SGS Korea Co., Ltd. (Gunpo Laboratory) 4, LS-ro 182beon-gil, Gunpo-si, Gyeonggi-do, Korea, 435-040 http://www.sgsgroup.kr RTT5041-20(2014.01.20)(2) Tel. +82 31 428 5700 / Fax. +82 31 427 2370 A4(210mmx297mm) 1.6. Summary of Test Results The EUT has been tested according to the following specifications: APPLIED STANDARD: FCC Part15 Subpart C § 15.247, RSS-210 Issue8, RSS-Gen Issue3 Section Test Item Result 15.205(a) 15.209 15.247(d) RSS-210 A8.5 Transmitter Radiated Spurious Emissions Conducted Spurious Emission Complied 15.247(a)(2) RSS-210 A8.2(a) RSS-Gen 4.6.1 6 ㏈ Bandwidth Complied 15.247(b)(3) RSS-210 A8.4(4) Maximum Peak Conducted Output Power Complied 15.247(e) RSS-210 A8.3(2) Power Spectral Density Complied 1.7. Test Procedure(s) The measurement procedures described in the American National Standard for Methods of Measurement of Radio-Noise Emission from Low-Voltage Electrical and Electronic Equipment in the Range of 9 ㎑ to 40 ㎓ (ANSI C63.4-2003) and the guidance provided in KDB 558074 were used in the measurement of the DUT. 1.8. Sample calculation Where relevant, the following sample calculation is provided:…

Text truncated - open the document above for the full version.

Model :EI-AN900A Test setup photo of EUT Model :EI-AN900A Photo of radiated spurious emission