A3LCTTAK3I01Wall Cableless_Tx

CHEMTRONICS Wall Cableless _ TX User Manual Product Name Wall Cableless _ TX Model Name CTTAK3I01 Version 0.1 Date October 10, 2020 Revision History Version Date Description 0.1 October 10, 2020 Draft Version Contents 1. Overview ................................................................................................................................................................................ 4 2. System Specification .......................................................................................................................................................... 5 2.1 Physical feature ................................................................................................................................................................... 5 2.2 Pin Description.................................................................................................................................................................... 6 2.3 Module Specification ......................................................................................................................................................... 7 2.4 RF Specification ................................................................................................................................................................. 9 3. Module Assembly ............................................................................................................................................................. 10 1. Overview This product is a module developed to process video signals in the 60GHz band using the built-in KSS104M chip. Since multiple chips are used on one board, the spacing between chips and chips should be at least 15mm. In addition, the TX Chip of this product receives video signals from the outside and transmits them to the Rx Chip of the KSS104M RX Board. In particular, by using an interface that transmits an electrical signal called V-By-one, video transmission can proceed very quickly. Features  1 Rx chip and 3 Tx chips are mounted  The data rate of 1 Rx chip supports up to 3Gbit/s general high speed.  The data rate of 3 Tx chips supports up to 5.4Gbit/s general high speed.  Very fast video transmission using V-by-One interface  Typical Active Power Consumption > 127mW Tx(Signal Processing ON) > 77mW Tx(Signal Processing OFF) > 152mW Rx(Signal Processing ON) > 100mW Rx(Signal Processing OFF)  Protection Against ESD Transient > HBM : 1000V > CDM : 500V/ 400V > MM : 100V Applications  Ideal for applications requiring high-speed video processing 2. System Specification 2.1 Physical feature Item Specification Product Name Wall Cableless _ TX Model Name CTTAK3I01 Communication Method EHF(Extremely High Frequency, 60GHz) Link Dimension 80.00mm x 80.00mm x 1.4mm(T) Wei ght 24g Mounting Type Waf e r(6Pin Header), OCM Connector(44Pin) Other subsidiary materials ECCOSORB(EMI Absorber) Mutual of the person being certified CHEMTRONICS Co., Ltd Manufacturer/country of manufacture CHEMTRONICS Co., Ltd / Korea Date of manufacture Marked separately Certification Number - 2.2 Pin Description 2.2.1 Wafer(6Pin) Pin No. Pin Name Ty pe Function Pin No. Pin Name Ty pe Function 1 RSV I/O Receive Signal Check 2 INFO_3.3V_1 P 3.3V Power Check 3 INFO_3.3V_2 P 3.3V Power Check 4 PS_ON I/O PS-ON Signal I/O 5 RSV2 I/O Receive Signal Check 6 GND P Digital Ground 2.2.2 OCM Connector(44Pin) Pin No. Pin Name Ty pe Function Pin No. Pin Name Ty pe Function 1 NC P NC 2 NC P NC 3 NC P NC 4 NC P NC 5 NC P NC 6 NC P NC 7 NC P NC 8 NC P NC 9 NC P NC 10 GND P Digital Ground 11 GTTX_P1_O I/O Ch1 Signal Process 12 GTTX_N1_O I/O Ch1 Signal Process 13 GND P Digital Ground 14 GTRX_P4_O I/O Ch4 Signal Process 15 GTRX_N4_O I/O Ch4 Signal Process 16 GND P Digital Ground 17 GTTX_P3_O I/O Ch3 Signal Process 18 GTTX_N3_O I/O Ch3 Signal Process 19 GND P Digital Ground 20 GTTX_P2_O I/O Ch2 Signal Process 21 GTTX_N2_O I/O Ch2 Signal Process 22 GND P Digital Ground 23 PD_N_TX_CON I/O TX Signal Control 24 NC P NC 25 GND P Digital Ground 26 INFO_3.3V_1 I/O 3.3V Power Check 27 INFO_3.3V_2 I/O 3.3V Power Check 28 RSV I/O Receive Signal Check 29 GND P Digital Ground 30 PS_ON I/O PS-ON Signal I/O 31 NC P NC 32 NC P NC 33 GND P Digital Ground 34 RSV2 I/O Receive Signal Check 35 NC P NC 36 GND P Digital Ground 37 B3.3V_PW_TX P INPUT 3.3V 38 GND P Digital Ground 39 GND P Digital Ground 40 B1.8V_PW_TX P INPUT 1.8V 41 B1.8V_PW_TX P INPUT 1.8V 42 B1.8V_PW_TX P INPUT 1.8V 43 B1.8V_PW_TX P INPUT 1.8V 44 B1.8V_PW_TX P INPUT 1.8V 2.3 Module Specification 2.3.1 Product Summary Item P/N Description KSS104M IC KQG104-B3-TXS-E - Signal Processing : NO - Data Rate : 5.4Gbps - EQ : 6dB KQG104-B3-RXS-E - Signal Processing : NO - Data Rate : 5.4Gbps - PE : 6dB LDO G943F11U - Adjustable Output Low to 0.9V - Input Voltage as Low as 1.0V and VPP Voltage 5V - Over Current and Over Temperature Protection - Low Reverse Leakage (Output to Input) - Apply GND to PIN of SET 1 and 3.3V to PIN of SET 2. So that 1.2V power is output FET Transistor AOSS32338C - Trench Power MOSFET technology - Low Drain-Source Resistor - LOW Gate Charge - RoHS and Halogen-Free Compliant - Drain-Source Voltage : 30V - Ideal for Load Switching Absorber ECCOSORB - Excellent performance in the 40 ~ 100Ghz frequency band - Application : automotive, industrial, etc. 2.3.2 Electrical Specification Parameter Description Min. Ty p . Max. Units Supply Voltage Main Input Voltage 3.1 3.3 3.5 V 1.6 1.8 2 V Output Voltage LDO Output Voltage 1.0 1.2 1.4 Signal Spec Eye Height(EH) 135 mA Eye Width(EW) 129.64 Ps Total Jitter(TJ) 207.06 ps Signal Sensitivity BER should be no FAIL for 60 seconds (TX B/D to RX B/D distance:10mm) 60 sec 2.3.3 Environment Specification Item Specification Storage Temperature -40°C to + 115°C Operating Temperature -30°C to + 85°C Humidity (Operational) 85%(85°C) relative humidity Vibration (Operational) 5 Hz to 500 Hz sinusoidal, 1.0G Drop No damages after 90cm drop over concrete floor ES…

Text truncated - open the document above for the full version.

Letter of Authorization Company : Samsung Electronics Co Ltd Address : 19 Chapin Rd., Building D, Pine Brook, New Jersey, 07058, United States Product Name : Wall Cableless_Tx Model Number : CTTAK3I01 FCC Identifier : A3LCTTAK3I01 We authorize MiCOM Labs Inc, 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the above named equipment. Any individual within MiCOM Labs is authorized to act on our behalf and take action on the application. We declare that MiCOM Labs Inc, 575 Boulder Court, Pleasanton, California 94566, USA, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Name: Jenni Chun Date: November 02, 2020 Title: General Manager Signature of applicant:

Samsung Electronics Co Ltd FCC – Modular Approval Request Rev 2.0 Modular Transmitter Approval Request Federal Communications Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 Company name: Samsung Electronics Co Ltd FCC ID: A3LCTTAK3I01 Gentlemen, In accordance with 47CFR 15.212 Modular Transmitters and KDB 996369 D01 ‘Module Certification Guide v01r04’. FCC ID: A3LCTTAK3I01 has been examined against the following requirements. Requirement per 15.212 and KDB 996369 D01 ‘Modular Certification Guide v01r04 Explanation from Grantee (do not write yes/no, but explain why product complies/how it is achieved) The radio elements must have the radio frequency circuitry shielded. Physical components and tuning capacitor(s) may be located external to the shield, but must be on the module assembly No The module must have buffered modulation/data inputs to ensure that the device will comply with Part 15 requirements with any type of input signal Yes The module has buffered modulation/data inputs. Refer to the Block Diagram. The module must contain power supply regulation on the module Yes This module is equipped internal power regulators. Refer to the Block Diagram. The module must contain a permanently attached antenna, or contain a unique antenna connector, and be marketed and operated only with specific antenna(s), per Sections 15.203, 15.204(b), 15.204(c), 15.212(a), 2.929(b) Yes This module is equipped with an onboard Chip Antenna. Refer to the internal photo The module must demonstrate compliance in a stand-alone configuration Yes This module was tested in a stand-alone configuration. Refer to the test setup photos The module must be labelled with its permanently affixed FCC ID label, or use an electronic display (See KDB Publication 784748 about labelling requirements) Yes Refer to the FCC ID Label Location. The module must comply with all specific rules applicable to the transmitter including all the conditions provided in the integration instructions by the grantee Yes The module complies with all specific rules applicable to the transmitter. The module must comply with RF exposure requirements Yes Refer to the EMF Test Report. Name: Jenni Chun Date: November 02, 2020 Title: General Manager Signature of applicant:

Samsung Electronics Co Ltd Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: November 02, 2020 Subject; Request for Confidentiality FCC ID: A3LCTTAK3I01 To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: Jenni Chun Title: General Manager

Page 1 of 6 Page 2 of 6 Page 3 of 6 Page 4 of 6 Page 5 of 6 Page 6 of 6

Page 1 of 3 Page 2 of 3 Page 3 of 3 Chip Antenna TX Chip Antenna TX Chip Antenna TX Chip Antenna RX

Page 1 of 7 Report No. : OT-20N-RWD-002 It should not be reproduced except in full, without the written approval of ONETECH Corp. OTC-TRF-RF-001(0) ONETECH Corp.: 43-14, Jinsaegol-gil, Chowol-eup, Gwangju-si, Gyeonggi-do, 12735, Korea (TEL: 82-31-799-9500, FAX: 82-31-799-9599) ELECTROMAGNETIC EMISSION C OMPLIANCE REPORT Test Report No. : OT-20N-RWD-002 Reception No. : 2009003840 Applicant : Samsung Electronics Co Ltd Address : 19 Chapin Rd., Building D, Pine Brook, New Jersey, 07058, United States Manufacturer : Samsung Electronics Co Ltd Address : 129, Samsung-ro, Yeongtong-gu, Suwon-si, Gyeonggi-do 16677, Korea Type of Equipment : Wall Cableless_Tx FCC ID. : A3LCTTAK3I01 Model Name : CTTAK3I01 Serial number : N/A Total page of Report : 7 pages (including this page) Date of Incoming : September 18, 2020 Date of issue : November 02, 2020 SUMMARY The equipment complies with the regulation; FCC CFR 47 PART 15 SUBPART C Section 15.255 This test report only contains the result of a single test of the sample supplied for the examination. It is not a generally valid assessment of the features of the respective products of the mass-production. Tested by Ju Yun Park / Assistant Manager ONETECH Corp. Reviewed by Tae-Ho, Kim / Senior Manager ONETECH Corp. Approved by Ki-Hong, Nam / General Manager ONETECH Corp. Page 2 of 7 Report No. : OT-20N-RWD-002 It should not be reproduced except in full, without the written approval of ONETECH Corp. OTC-TRF-RF-001(0) ONETECH Corp.: 43-14, Jinsaegol-gil, Chowol-eup, Gwangju-si, Gyeonggi-do, 12735, Korea (TEL: 82-31-799-9500, FAX: 82-31-799-9599) CONTENTS PAGE 1. VERIFICATION OF COMPLIANCE ............................................................................................................................. 4 2. GENERAL INFORMATION ............................................................................................................................................ 5 2.1 PRODUCT DESCRIPTION ................................................................................................................................................. 5 2.2 MODEL DIFFERENCES: .................................................................................................................................................. 5 2.3 RELATED SUBMITTAL(S) / GRANT(S) ............................................................................................................................ 5 3. EUT MODIFICATIONS .................................................................................................................................................... 5 4. MAXIMUM PERMISSIBLE EXPOSURE ...................................................................................................................... 6 4.1 RF EXPOSURE CALCULATION ....................................................................................................................................... 6 4.2 EUT DESCRIPTION ......................................................................................................................................................... 6 4.3 CALCULATED MPE SAFE DISTANCE............................................................................................................................. 7 Page 3 of 7 Report No. : OT-20N-RWD-002 It should not be reproduced except in full, without the written approval of ONETECH Corp. OTC-TRF-RF-001(0) ONETECH Corp.: 43-14, Jinsaegol-gil, Chowol-eup, Gwangju-si, Gyeonggi-do, 12735, Korea (TEL: 82-31-799-9500, FAX: 82-31-799-9599) Revision History Rev. No. Issue Report No. Issued Date Revisions Section Affected 0 OT-20N-RWD-002 November 02, 2020 Initial Release All Page 4 of 7 Report No. : OT-20N-RWD-002 It should not be reproduced except in full, without the written approval of ONETECH Corp. OTC-TRF-RF-001(0) ONETECH Corp.: 43-14, Jinsaegol-gil, Chowol-eup, Gwangju-si, Gyeonggi-do, 12735, Korea (TEL: 82-31-799-9500, FAX: 82-31-799-9599) 1. VERIFICATION OF COMPLIANCE Applicant : Samsung Electronics Co Ltd Address : 19 Chapin Rd., Building D, Pine Brook, New Jersey, 07058, United States Contact Person : Youngjoong Noh / Principal Engineer Telephone No. : +82-31-277-0598 FCC ID : A3LCTTAK3I01 Model Name : CTTAK3I01 Brand Name : Serial Number : N/A Date : November 02, 2020 DEVICE TYPE DXT – Part 15 Low Power Transceiver, Rx Verified E.U.T. DESCRIPTION Wall Cableless_Tx THIS REPORT CONCERNS Original Grant MEASUREMENT PROCEDURES ANSI C63.10: 2013 TYPE OF EQUIPMENT TESTED Pre-Production KIND OF EQUIPMENT AUTHORIZATION REQUESTED Certification EQUIPMENT WILL BE OPERATED UNDER FCC RULES PART(S) FCC CFR47 Part 15 Subpart C Section 15.255 Modifications on the Equipment to Achieve Compliance None Final Test was Conducted On 3 m, Semi Anechoic Chamber -. The above equipment was tested by ONETECH Corp. for compliance with the requirement set forth in the FCC Rules and Regulations. This said equipment in the configuration described in this report, shows the maximum emission levels emanating from equipment are within the compliance requirements. Page 5 of 7 Report No. : OT-20N-RWD-002 It should not be reproduced except in full, without the written approval of ONETECH Corp. OTC-TRF-RF-001(0) ONETECH Corp.: 43-14, Jinsaegol-gil, Chowol-eup, Gwangju-si, Gyeonggi-do, 12735, Korea (TEL: 82-31-799-9500, FAX: 82-31-799-9599) 2. GENERAL INFORMATION 2.1 Product Description The Samsung Electronics Co Ltd, Model CTTAK3I01 (referred to as the EUT in this report) is an Wall Cableless_Tx, Product specification information described herein was obtained from product data sheet or user’s manual. DEVICE TYPE Motion Detection Sensor Module TRANSMITTING FREQUENCY 57 GHz ~ 64 GHz ANTENNA TYPE Chip Antenna ANTENNA Gain 5.30 dBi 2.2 Model Differences: -. None 2.3 Related Submittal(s) / Grant(s) Original submittal only 3. EUT MODIFICATIONS -. None Page 6 of 7 Report No. : OT-20N-RWD-002 It should not be reproduced except in full, without the written approval of ONETECH Co…

Text truncated - open the document above for the full version.

Page 1 of 34 Report No. : OT-20N-RWD-001 It should not be reproduced except in full, without the written approval of ONETECH Corp. OTC-TRF-RF-001(0) ONETECH Corp.: 43-14, Jinsaegol-gil, Chowol-eup, Gwangju-si, Gyeonggi-do, 12735, Korea (TEL: 82-31-799-9500, FAX: 82-31-799-9599) ELECTROMAGNETIC EMISSION C OMPLIANCE REPORT Test Report No. : OT-20N-RWD-001 Reception No. : 2009003840 Applicant : Samsung Electronics Co Ltd Address : 19 Chapin Rd., Building D, Pine Brook, New Jersey, 07058, United States Manufacturer : Samsung Electronics Co Ltd Address : 129, Samsung-ro, Yeongtong-gu, Suwon-si, Gyeonggi-do 16677, Korea Type of Equipment : Wall Cableless_Tx FCC ID. : A3LCTTAK3I01 Model Name : CTTAK3I01 Serial number : N/A Total page of Report : 34 pages (including this page) Date of Incoming : September 18, 2020 Date of issue : November 02, 2020 SUMMARY The equipment complies with the regulation; FCC CFR 47 PART 15 SUBPART C Section 15.255 This test report only contains the result of a single test of the sample supplied for the examination. It is not a generally valid assessment of the features of the respective products of the mass-production. Tested by Ju Yun Park / Assistant Manager ONETECH Corp. Reviewed by Tae-Ho, Kim / Senior Manager ONETECH Corp. Approved by Ki-Hong, Nam / General Manager ONETECH Corp. Page 2 of 34 Report No. : OT-20N-RWD-001 It should not be reproduced except in full, without the written approval of ONETECH Corp. OTC-TRF-RF-001(0) ONETECH Corp.: 43-14, Jinsaegol-gil, Chowol-eup, Gwangju-si, Gyeonggi-do, 12735, Korea (TEL: 82-31-799-9500, FAX: 82-31-799-9599) CONTENTS PAGE 1. VERIFICATION OF COMPLIANCE ............................................................................................................................. 5 2. GENERAL INFORMATION ............................................................................................................................................ 6 2.1 TEST ITEMS AND RESULTS ............................................................................................................................................. 6 2.2 PRODUCT DESCRIPTION ................................................................................................................................................. 7 2.2.1 Description of Test Mode ........................................................................................................................................ 7 2.3 MODEL DIFFERENCES: .................................................................................................................................................. 7 2.4 RELATED SUBMITTAL(S) / GRANT(S) ............................................................................................................................ 7 2.5 PURPOSE OF THE TEST ................................................................................................................................................... 7 2.6 TEST METHODOLOGY .................................................................................................................................................... 7 2.7 TEST FACILITY ............................................................................................................................................................... 7 3. SYSTEM TEST CONFIGURATION ............................................................................................................................... 8 3.1 JUSTIFICATION ............................................................................................................................................................... 8 3.2 PERIPHERAL EQUIPMENT .............................................................................................................................................. 8 3.3 MODE OF OPERATION DURING THE TEST ...................................................................................................................... 9 3.4 EQUIPMENT MODIFICATIONS ........................................................................................................................................ 9 3.5 CONFIGURATION OF TEST SYSTEM ............................................................................................................................. 10 3.6 ANTENNA REQUIREMENT ............................................................................................................................................ 10 4. PRELIMINARY TEST .................................................................................................................................................... 10 4.1 AC POWER LINE CONDUCTED EMISSIONS TESTS ....................................................................................................... 10 4.2 RADIATED EMISSIONS TESTS....................................................................................................................................... 10 5. TEST & SYSTEM DESCRIPTION ................................................................................................................................ 11 5.1 MEASUREMENT SYSTEM .............................................................................................................................................. 11 6. TEST RESULTS ............................................................................................................................................................... 14 6.1 EMISSION BANDWIDTH ................................................................................................................................................ 14 6.1.1 Operating environment ......................................................................................................................................... 14 6.1.2 Test Date................................................................................................................................................................ 14 6…

Text truncated - open the document above for the full version.

Page 1 of 3 - CONDUCTED EMISSION TEST Page 2 of 3 - RADIATED EMISSION TEST 30 MHz ~ 1 GHz 1 GHz ~ 18 GHz Page 3 of 3 18 GHz ~ 40 GHz 40 GHz ~ 200 GHz