A3LCYWDCB7URWireless Connection Module

COMPANY CONFIDENTIAL CY-WDCB7UR installation manual P/N: BN59-01157A 1 of 37 CY-WDCB7UR installation manual Proprietary Information All information contained in this document is confidential and proprietary to Hanshin IT. No license, expressed or implied, under any patent, copyright or trade secret right is granted or implied by the conveyance of this document. No part of this document may be reproduced, transmitted, transcribed, stored in a retrieval system, translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual, or otherwise without the prior written permission of Hanshin IT. Copyright © 2012 Hanshin IT. All rights reserved. Document Title CY-WDCB7UR Installation manual Samsung P/N BN59-01157A Hanshin IT P/N HS6621 Rev 2.6 Latest Revision Number V0.9 Latest Revised Date 04/23/2012 Confidential Revision No.: V0.9 Authors: DC Kim Project Leader: DC Kim Project Code: SS-UWB-201101 Release Date: 04/23/2012 COMPANY CONFIDENTIAL CY-WDCB7UR installation manual P/N: BN59-01157A 2 of 37 CONTENT 1. SCOPE ............................................................................................................................................................................................. 8 1.1 DOCUMENT ...................................................................................................................................................................... 8 2. How to install the CY-WDCB7UR? ..................................................................................................................................... 8 2.1 UWB RF module applications ................................................................................................................................... 8 2.2 Interface signals .............................................................................................................................................................. 8 2.3 Installation ......................................................................................................................................................................... 8 3. HARDWARE SPECIFICATIONS ........................................................................................................................................... 10 3.1 GENERAL ......................................................................................................................................................................... 10 3.2 PRODUCT CHACTERISTICS ..................................................................................................................................... 10 3.3 ENVIRONMENT ............................................................................................................................................................ 11 3.3.1 Temperature ................................................................................................................................................... 11 3.3.2 Humidity ........................................................................................................................................................... 11 3.4 PRODUCT PHOTOGRAPH ....................................................................................................................................... 12 4. HARDWARE REQUIREMENTS ............................................................................................................................................ 13 4.1 FUNCTIONAL BLOCK DIAGRAM .......................................................................................................................... 13 4.2 AL6301/AL5100 CHIPSET ARCHITECTURE ....................................................................................................... 14 4.3 IO CONNECTOR PIN DEFINITION ....................................................................................................................... 15 4.4 Manufacturing Test Block Diagram .................................................................................................................... 16 4.4.1 PT Block Diagram ......................................................................................................................................... 16 4.4.2 FT Block Diagram ......................................................................................................................................... 16 COMPANY CONFIDENTIAL CY-WDCB7UR installation manual P/N: BN59-01157A 3 of 37 4.5 PRODUCT TEST ITEMS & SPEC ............................................................................................................................ 17 4.5.1 Transmission Section .................................................................................................................................. 17 4.5.2 Receiver Section ............................................................................................................................................ 17 4.6 PERFORMANCE TEST RESULTS ............................................................................................................................. 18 4.6.1 Current Consumption ................................................................................................................................. 18 4.6.2 Indoor Range Throughput ....................................................................................................................... 18 5. DIMENSION INFORMATION .............................................................................................................................................. 19 5.1 PCB DIMENSION ......................................................................................................................................................... 19 5.2 SHIELD CASE DIMENSION ............................................................................................................…

Text truncated - open the document above for the full version.

CY-WDCB7UR user’s manual 1 of 27 User’s manual CY-WDCB7UR V1.0 CY-WDCB7UR user’s manual 2 of 27 CONTENT 1. Package Components .............................................................................................................................................................. 6 2. How to install the CY-WDCB7UR? ..................................................................................................................................... 6 2.1 UWB RF module applications ................................................................................................................................... 6 2.2 Interface signals .............................................................................................................................................................. 6 2.3 Module Installation ....................................................................................................................................................... 6 3. S/W installation .......................................................................................................................................................................... 8 4. Connecting Wireless USB dongle to USB port ......................................................................................................... 11 5. How to check the proper installation of CY-WDCB7UR? .................................................................................. 13 6. Cautions ...................................................................................................................................................................................... 14 7. HARDWARE SPECIFICATIONS ........................................................................................................................................... 15 7.1 GENERAL ......................................................................................................................................................................... 15 7.2 PRODUCT CHACTERISTICS ..................................................................................................................................... 15 7.3 ENVIRONMENT ............................................................................................................................................................ 15 7.3.1 Temperature ................................................................................................................................................... 15 7.3.2 Humidity ........................................................................................................................................................... 15 7.4 PRODUCT PHOTOGRAPH ....................................................................................................................................... 16 8. HARDWARE REQUIREMENTS ............................................................................................................................................ 16 8.1 FUNCTIONAL BLOCK DIAGRAM .......................................................................................................................... 16 8.2 AL6301/AL5100 CHIPSET ARCHITECTURE ....................................................................................................... 17 8.3 IO CONNECTOR PIN DEFINITION ....................................................................................................................... 18 CY-WDCB7UR user’s manual 3 of 27 8.4 PERFORMANCE TEST RESULTS ............................................................................................................................. 19 8.4.1 Current Consumption ................................................................................................................................. 19 8.4.2 Indoor Range Throughput ....................................................................................................................... 19 9. DIMENSION INFORMATION .............................................................................................................................................. 20 9.1 PCB DIMENSION ......................................................................................................................................................... 20 9.2 ASSEMBLY DIMENSION ........................................................................................................................................... 21 10. PACKAGE DIMENSION ................................................................................................................................................. 22 10.1 LABEL DIMENSION ..................................................................................................................................................... 22 10.2 LABEL STICK .................................................................................................................................................................. 22 11. ANTENNA SPECIFICATIONS ...................................................................................................................................... 23 11.1 Summaries ...................................................................................................................................................................... 23 11.1.1 Function and Features ............................................................................................................................... 23 11.2 Specification .................................................................................................................................................................. 23 11.2.1 Applicable Boundary ................................................................................................................................... 23 11.2.2 Electrical Specification ..........................................................................…

Text truncated - open the document above for the full version.

416, Maetan-3 Dong , Yeongtong-Gu, Suwon-City, Gyeonggi-Do 443-742 South Korea Date: 04/09/2012 Compliance Certification Services Certification Division 47173 Benicia Street Fremont, CA 94538, USA To whom it may concern: I, the undersigned, hereby authorize Ms. Claire Hoque/Application Examiner of Compliance Engineering Services, Inc., d.b.a. Compliance Certification Services and hereafter referred to as CCS, to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by Ms. Claire Hoque of CCS on our behalf shall have the same effect as acts of our own. I, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). In authorizing CCS as our agent, we still recognize that we are responsible to: a) comply with the relevant provisions of the certification program; b) make all necessary arrangements for the conduct of the evaluation, including provision for examining documentation and access to all areas, records (including internal audit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment, surveillance, reassessment) and resolution of complaints; c) make claims regarding certification only in respect of the scope for which certification has been granted; d) do not use our product certification in such a manner as to bring the Certification Division into disrepute and not make any statement regarding our product certification which the Certification Division may consider misleading or unauthorized; e) upon suspension or cancellation of certification, discontinue use of all advertising matter that contains any reference thereto and return any certification documents as required by the Certification Division; f) use certification only to indicate the products are certified as being in conformity with specified standards; g) endeavor to ensure that no certificate or report nor any part thereof is used in a misleading manner; h) ensure that any reference to our product certification in communication media such as documents, brochures or advertising, complies with the requirements of the Certification Division; i) keep a record of all complaints made known to the us relating to the product’s compliance with requirements of the relevant standard and to make these records available to the Certification Division when requested; j) take appropriate action with respect to such complaints and any deficiencies found in products or services that affect compliance with the requirements for certification; k) document the actions taken. This authorization is valid until further written notice from the applicant. Sincerely Yours, NAME: Sang Kyung(Peter), Ra TITLE: Head of QA Lab (General Manager) Applicant: Samsung Electronics America, Inc Address: 19 Chapin Rd, Building D. Pine Brook, NJ 07058

416 Maetan-Dong, Young-Tong-Gu, Suwon City, Gyungki-Do, 443-742 Korea To Whom it may Concern Date: May 1 st 2012 Subject: Authorized signatories The following people are authorized by [Samsung Electronics America Inc] to sign documents for FCC product approval under FCC Grantee code [A3L] on behalf of the company: CHANGSEUB EUM JAYWOO LEE Sincerely Yours, Sang Kyung (Peter), Ra General Manager Samsung Electronics America Inc

416, Maethan 3-Dong, Yeongtong-Gu, Suwon-Si, Gyeonggi-Do, KOREA Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road, Columbia, MD 21046 Date: March 30, 2012 RE: Request of confidentiality for FCC ID: A3LCYWDCB7UR To Whom It May Concern: Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules (CFR 47), and Sectio 552 (b) (4) of the Freedom of Information Act, SAMSUNG ELECTRONICS CO.,LTD. Hereby requests confidentiality and treatment of certain information accompanying this application. The materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. We are also hereby request Short-Term Confidentiality for 180 day after the grant as outlined in Public Notice DA 04-1705. This provision will give SAMSUNG ELECTRONICS CO.,LTD. Temporary confidentiality of commercially sensitive information prior to product release. The requested Permanent and Short-Term Confidential exhibits are listed as follows: PERMANENT AND SHORT-TERM CONFIDENTIAL LIST Exhibit Description PERMANENT 1 Operational Description 2 Block Diagram 3 Schematics SHORT-TERM 4 External Photos 5 Internal Photos 6 Test-Setup Photos 7 Users Manual The Applicant understands that pursuant to Rule 0.457, disclosure of this application and all accompanying documentations, where applicable, will not be made public before the date of the Grant for this application. Sincerely, March 30 2012 NAME : Jaywoo Lee TITLE : Engineer COMPANY : : Samsung Electronics Co., Ltd. 416 Maetan-dong, Young-Tong gu, Suwon, Korea 442-742

Applicant/Grantee Samsung Electronics Co Ltd FCC ID: A3LCYWDCB7UR Section 15.212 Modular Transmitters Request for Modular Approval ■ Request for Limited Modular Approval Requirements EUT Conditions Comply (Y/N) Single Modular Approval Requirements 1 The radio elements of the modular transmitter must have their own shielding. The physical crystal and tuning capacitors may be located external to the shielded radio elements. Y 2 The modular transmitter must have buffered modulation/data inputs (if such inputs are provided) to ensure that the module will comply with Part 15 requirements under conditions of excessive data rates or over-modulation. Y 3 The modular transmitter must have its own power supply regulation. Y 4 The modular transmitter must comply with the antenna and transmission system requirements of Sections 15.203, 15.204(b) and 15.204(c). The antenna must either be permanently attached or employ a “unique” antenna coupler (at all connections between the module and the antenna, including the cable). The “professional installation” provision of Section 15.203 is not applicable to modules but can apply to limited modular approvals under paragraph (b) of this section. Y 5 The modular transmitter must be tested in a stand-alone configuration, i.e., the module must not be inside another device during testing for compliance with Part 15 requirements. Unless the transmitter module will be battery powered, it must comply with the AC line conducted requirements found in Section 15.207. AC or DC power lines and data input/output lines connected to the module must not contain ferrites, unless they will be marketed with the module (see Section 15.27(a)). The length of these lines shall be the length typical of actual use or, if that length is unknown, at least 10 centimeters to insure that there is no coupling between the case of the module and supporting Y equipment. Any accessories, peripherals, or support equipment connected to the module during testing shall be unmodified and commercially available (see Section 15.31(i)). 6 The modular transmitter must be equipped with either a permanently affixed label or must be capable of electronically displaying its FCC identification number. (A) If using a permanently affixed label, the modular transmitter must be labeled with its own FCC identification number, and, if the FCC identification number is not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display a label referring to the enclosed module. This exterior label can use wording such as the following: “Contains Transmitter Module FCC ID: XYZMODEL1” or “Contains FCC ID: XYZMODEL1.” Any similar wording that expresses the same meaning may be used. The Grantee may either provide such a label, an example of which must be included in the application for equipment authorization, or, must provide adequate instructions along with the module which explain this requirement. In the latter case, a copy of these instructions must be included in the application for equipment authorization. (B) If the modular transmitter uses an electronic display of the FCC identification number, the information must be readily accessible and visible on the modular transmitter or on the device in which it is installed. If the module is installed inside another device, then the outside of the device into which the module is installed must display a label referring to the enclosed module. This exterior label can use wording such as the following: “Contains FCC certified transmitter module(s).” Any similar wording that expresses the same meaning may be used. The user manual must include instructions on how to access the electronic display. A copy of these instructions must be included in the application for equipment authorization. Y 7 The modular transmitter must comply with any specific rules or operating requirements that ordinarily apply to a complete transmitter and the manufacturer must provide adequate instructions along with the module to explain any such requirements. A copy of these instructions must be included in the application for equipment authorization. Y 8 The modular transmitter must comply with any applicable RF exposure requirements in its final configuration. Y A limited modular approval may be granted for single or split modular transmitters that do not comply with all of the above requirements, e.g., shielding, minimum signaling amplitude, buffered modulation/data inputs, or power supply regulation, if the manufacturer can demonstrate by alternative means in the application for equipment authorization that the modular transmitter meets all the applicable Part 15 requirements under the operating conditions in which the transmitter will be used. Limited modular approval also may be granted in those instances where compliance with RF exposure rules is demonstrated only for particular product configurations. The applicant for certification must state how control of the end product into which the module will be installed will be maintained such that full compliance of the end product is always ensured.

1 From: Claire Hoque, [email protected] To: Mark Neumann, [email protected] Re: FCC ID: A3LCYWDCB7UR Applicant: Samsung Electronics Co Ltd Correspondence Reference Number: 42020 Form 731 Confirmation Number: EA133144 Date of Original E-mail: 06/08/2012 1. We have deleted all exhibits uploaded to the application for certification that did not apply to the DUT. <answer> Noted, thanks. 2. Please explain how you will ensure compliance with §15.521(a): Operation onboard an aircraft, a ship or a satellite is prohibited. <answer> FCC Rules 15.250, 15.253, 15.255, 15.257, 15.521 include provisions that prohibit operation of certain unlicensed devices on aircraft, satellites [and other conditions, as applicable to particular Rule Parts]. The FCC has a long-standing precedent that a statement in the user manual has been sufficient to show compliance to these provisions. 3. The installer’s and user’s manuals should include use restrictions (toys, aircraft, ship, and satellite) per FCC Rule §15.521(a), as well as information to users as specified in §15.21. <answer>pls see revised Installer Manual and User Manual. 4. Please provide a more detailed explanation of the spurious emission at 1597 MHz identified in the output power measurements. What digital circuitry is being referred to? Is the circuitry in the device or in the test set-up? <answer> The device includes associated digital device circuitry to provide additional functions and capabilities other than the UWB transmission. The test mode software enables the UWB transmissions to be turned off, independent of the digital circuitry. This digital circuitry is in the device. 2 5. Please confirm compliance with 10-second shutoff requirement in §15.519(a)(1). <answer> pls see Page 5 of the User Manual. The FCC has a long-standing precedent that a statement in the Operational Description, User Manual, or Part 7 of a Modular Approval letter has been sufficient to show compliance to the 10-second transmission cessation requirement. Additionally KDB 393764 does not include any test procedures for this requirement. Thanks, UL CCS

1 From: Claire Hoque, [email protected] To: Mark Neumann, [email protected] Re: FCC ID: A3LCYWDCB7UR Applicant: Samsung Electronics Co Ltd Correspondence Reference Number: 42356 Form 731 Confirmation Number: EA133144 Date of Original E-mail: 08/01/2012 During the sample evaluation at the FCC laboratory, we learned from the Alereon utility that the design also supports frequency hopping operations. Regardless the number of channels used in the hopping, this important transmitter characteristics should be described. Please amend the operational description. <answer> pls see revised operational description which is uploaded to EAS today 8/2/2012 Please note that we have not received a response to our request for technical information dated June 26, 2012. <answer>we addressed 6/26 RT, all revised files and answer were uploaded to EAS today 8/2/2012 Thanks, UL CCS

7. PACKAGE DIMENSION 7.1 LABEL Requirement Label, pasted on the bottom of cover Material: PP MATIC/S692N/GB Label Image 7.2 LABEL location

FCC CFR47 PART 15 SUBPART F CERTIFICATION TEST REPORT FOR UWB RADIO DEVICE WITH USB 2.0 INTERFACE MODEL NUMBER: CY-WDCB7UR FCC ID: A3LCYWDCB7UR REPORT NUMBER: 12U14355-2, Revision B ISSUE DATE: APRIL 28, 2012 Prepared for SAMSUNG ELECTRONICS CO., LTD. 416, MAETAN 3-DONG, YEONGTONG-GU, SUWON-CITY, GYEONGGI-DO KOREA Prepared by COMPLIANCE CERTIFICATION SERVICES (UL CCS) 47173 BENICIA STREET FREMONT, CA 94538, U.S.A. TEL: (510) 771-1000 FAX: (510) 661-0888 REPORT NO: 12U14355-2B DATE: APRIL 28, 2012 FCC ID: A3LCYWDCB7UR Page 2 of 77 COMPLIANCE CERTIFICATION SERVICES (UL CCS) FORM NO: CCSUP4701E 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL CCS. Revision History Rev. Issue Date Revisions Revised By -- 04/19/2012 Initial Issue M. Heckrotte B 06/28/2012 Added Frequency Stability Results M. Heckrotte REPORT NO: 12U14355-2B DATE: APRIL 28, 2012 FCC ID: A3LCYWDCB7UR Page 3 of 77 COMPLIANCE CERTIFICATION SERVICES (UL CCS) FORM NO: CCSUP4701E 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL CCS. TABLE OF CONTENTS 1. ATTESTATION OF TEST RESULTS .................................................................................... 5 2. TEST METHODOLOGY ........................................................................................................ 6 3. FACILITIES AND ACCREDITATION .................................................................................... 6 4. CALIBRATION AND UNCERTAINTY .................................................................................. 6 4.1. MEASURING INSTRUMENT CALIBRATION ................................................................ 6 4.2. SAMPLE CALCULATION ............................................................................................... 6 4.3. MEASUREMENT UNCERTAINTY ................................................................................. 6 5. EQUIPMENT UNDER TEST ................................................................................................. 7 5.1. DESCRIPTION OF EUT ................................................................................................. 7 5.2. OPERATING FREQUENCY RANGE ............................................................................. 7 5.3. MAXIMUM OUTPUT POWER ........................................................................................ 7 5.4. DESCRIPTION OF AVAILABLE ANTENNAS ................................................................ 7 5.5. SOFTWARE AND FIRMWARE ...................................................................................... 7 5.6. WORST-CASE CONFIGURATION ................................................................................ 7 5.7. OPERATING MODE ....................................................................................................... 7 5.8. DESCRIPTION OF TEST SETUP .................................................................................. 8 6. TEST AND MEASUREMENT EQUIPMENT ....................................................................... 10 7. UWB TEST PROCEDURES ................................................................................................ 11 8. LIMITS AND RESULTS ...................................................................................................... 12 8.1. UWB BANDWIDTH, CENTER FREQUENCY, AND FRACTIONAL BW ...................... 12 8.1.1. UWB BANDWIDTH FOR BG1 .............................................................................. 13 8.1.2. UWB BANDWIDTH FOR BG3 .............................................................................. 19 8.1.3. UWB BANDWIDTH FOR BG6 .............................................................................. 25 8.2. PEAK POWER ............................................................................................................. 31 8.3. RADIATED EMISSIONS ABOVE 960 MHz .................................................................. 33 8.3.1. RADIATED EMISSIONS ABOVE 960 MHz FOR BG1 .......................................... 35 8.3.2. RADIATED EMISSIONS ABOVE 960 MHz FOR BG3 .......................................... 44 8.3.3. RADIATED EMISSIONS ABOVE 960 MHz FOR BG6 .......................................... 53 8.4. RADIATED EMISSIONS AT OR BELOW 960 MHz ..................................................... 62 9. FREQUENCY STABILITY ........…

Text truncated - open the document above for the full version.