A3LDVDVR320ADVD Recorder/ Video Cassette Recorder

Instruction Manual DVD-VR320 www.samsung.com AK68-00588A-02 00588A(00)-VR320-1/XAA-eng 6/7/05 7:08 PM Page 1 G etting Started 2- English Warning TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER(OR BACK). NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol indicates “dangerous voltage” inside the product that presents a risk of electric shock or personal injury. This symbol indicates important instructions accompanying the product. Do not install this equipment in a confined space such as a bookcase or similar unit. WARNING: To prevent damage which may result in fire or electric shock hazard, do not expose this appli- ance to rain or moisture. CAUTION : This DVD Recorder & VCR USES AN INVISI- BLE LASER BEAM WHICH CAN CAUSE HAZARDOUS RADIATION EXPOSURE IF DIRECTED. BE SURE TO OPERATE RECORDER COR- RECTLY AS INSTRUCTED. CAUTION THIS PRODUCT UTILIZES A LASER. USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL. CAUTIONS Caution: To prevent electric shock, match wide blade of plug to wide slot, fully insert. Attention: Pour éviter les chocs électriques, introduíre la lame la plus large de la fiche dans la borne correspondante de la prise et pousser jusqu au fond. This product satisfies FCC regulations when shielded cables and connectors are used to connect the unit to other equipment. To prevent electromagnetic interference with electric appliances, such as radios and televisions, use shielded cables and connectors for connections. FCC NOTE (for U.S.A): This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interfer- ence in a residential installation. This equipment gener- ates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruc- tions, may cause harmful interference to radio communi- cations. However, there is no guarantee that interfer- ence will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the follow- ing measures: •Reorient or relocate the receiving antenna. •Increase the separation between the equipment and receiver. •Connect the equipment into an outlet on a circuit differ- ent from that to which the receiver is connected. •Consult the dealer or an experienced radio/TV techni- cian for help.
This unit can be used only where the power supply is AC 120V, 60Hz. It cannot be used else- where.
This DVD Recorder & VCR is designed and manufactured to respond to the Region Management Information. If the Region number of a DVD disc does not corre- spond to the Region number of this , the DVD Recorder & VCR cannot play the disc.
This device is protected by U.S. Patent Nos.4,631,603;4,577,216;4,819,098;4,907,093; and 6,516,132. This product incorporates copyright pro- tection technology that is protected by U.S. patents and other intellectual property rights. Use of this copyright protection technology must be authorized by Macrovision,and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited.
This product is covered by one or more of the following U.S. patents: 5,034,830 5,060,200 5,457,669 5,561,649 5,691,858 5,705,762 5,987,417 6,043,912 6,222,983 6,272,096 6,377,524 6,377,531 6,385,587 6,389,569 6,389,570 6,408,408 6,466,532 6,473,736 6,477,501 6,480,829 6,556,520 6,556,521 6,556,522 6,594,208 6,674,697 6,674,957 6,721,493 6,728,474 6,741,535 09/610381 09/610695 Note 00588A(00)-VR320-1/XAA-eng 6/7/05 7:08 PM Page 2 G etting Started English - 3 Important Safety Instructions Read these operating instructions carefully before using the unit. Follow all the safety instructions listed below. Keep these operating instructions handy for future refer- ence. 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings, Install in accordance with the manufacturer's instructions. 8) Do not install near any heat sources such as radi- ators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9) Do not defeat the safety purpose of the polarized or grounding- type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are pro- vided for your safety. if the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10) Protect the power cord from being walked on or pinched particularly at plugs, convenience recep- tacles, and the point where they exit from the apparatus. 11) Only use attachments/accessories specified by the manufacturer. 12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 13) Unplug this apparatus during lightning storms or when unused for long periods of time. 14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-sup- ply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or mois- ture, does not operate normally, or has been dropped. Handling Cautions • Before connec…

Text truncated - open the document above for the full version.

English - 45 P layback Playing back an Audio CD (CD-DA) Each disc has a variety of menu functions available. Playing an Audio CD(CD-DA) 1 Insert an Audio CD (CD-DA) into the disc tray. • The Audio CD menu appears and the tracks (songs) are played automatically. 2 Press the ......†† buttons to select the track (song) to start playback from, and then press the ENTER button. • You can also select the track (song) by pressing the number buttons on the remote. Audio CD(CD-DA) Screen Elements 1. Repeat mode: Repeat off/Repeat Track/Repeat Disc. 2. Current track (song): Displays the number of the track currently being played. 3. Displays the current play index and total track number. 4. This shows the operating state of a disc and a playback time corresponding to a portion that is currently played. 5. Displays the track list (song list) and the playing time of each track. 6. Button display. 7. Play Option: Normal, Random, Intro or Playlist SELECTMENUMOVE Music CD Repeat : OffPlay Option : Normal 01. TRACK 1 02. TRACK 2 03. TRACK 3 04. TRACK 4 05. TRACK 5 06. TRACK 6 4:39 4:31 4:30 3:53 4:23 4:24 00 : 5201. TRACK 1 01/12 SELECTMOVE Music CD Repeat : OffPlay Option : Normal 01. TRACK 1 02. TRACK 2 03. TRACK 3 04. TRACK 4 05. TRACK 5 06. TRACK 6 4:39 4:31 4:30 3:53 4:23 4:24 00 : 5201. TRACK 1 01/12 ! @ # ^ % $ & Buttons on the Remote Control used for CD playback 1. ......†† , 0~9:Selects a track (song). 2. √√ :Plays the selected track (song). 3. ENTER button:Plays the selected track (song). 4. √√lbutton:Plays the next track. 5. lœœbutton:Returns to the beginning of the current track when pressed during playback. If pressed again, your DVD Recorder & VCR moves to and plays the previous track. If you press this button within three seconds after playback starts, the previous track will be played. If you press this button after three seconds, the current track will be replayed from the beginning. 6. Press the (œœ /√√) button:Fast Play (FF1/FR1, FF2/FR2, FF3/FR3) 7. ■:Stops a track(song). 8. √ll :Plays a track(song) or pauses playback. 9. ANYKEY :To select the top menu on screen display (Repeat or Play Option). MENU 00588A(00)-VR320-2/XAA-eng 6/7/05 7:14 PM Page 45 46 - English P layback Playing back an MP3 CD Playing an MP3 Disc 1 Insert an MP3 CD into the disc tray. • The MP3 menu is displayed and the tracks (songs) are played automatically. 2 Press the ......†† buttons to select the folder you want to hear, and then press the ENTER button. • Press the ......†† buttons to select the track (song) you want to hear, and then press the ENTER button. • You can also select the desired track (song) by pressing the number buttons on the remote. MP3 Screen Elements 1. Repeat mode: Repeat off, Repeat Track, Repeat Folder or Repeat Disc 2. Current track (song): Displays the name of the track being played. 3. Displays the current folder and play index. 4. This shows the operating state of a disc and a play- back time corresponding to a portion that is currently played. 5. Displays the information for the folder and its tracks. 6. Button display. 7. Play Option : Normal, Random, Intro or Playlist SELECTRETURNMOVE Music MP3 Repeat : OffPlay Option : Normal ROOT Bryan Adams Bryan Adams_2 Straight from the heart Run to you Heaven 00 :22Straight from the heart ROOT 03/06 SELECTRETURNMOVE Music MP3 Repeat : OffPlay Option : Normal ROOT Bryan Adams Bryan Adams_2 Straight from the heart Run to you Heaven 00 :22Straight from the heart ROOT 03/06 ! @ # & $ % ^ Buttons on the Remote Control used for MP3 CD playback 1. ......†† , 0~9:Selects a track (song). 2. √√ :Plays the selected track (song). 3. ENTER button:Plays the selected track (song) or displays the files in the selected folder. 4. RETURN button:Moves to the folder to which the current song belongs. 5. √√ lbutton:Plays the next track. 6. lœœbutton:Returns to the beginning of the current track when pressed during playback. If pressed again, your DVD Recorder & VCR moves to and plays the previous track. If you press this button within three seconds after playback starts, the previous track will be played. If you press this button after three seconds, the current track will be replayed from the beginning. 7. ■:Stops a track(song). 8. √ll :Plays a track(song) or pauses playback. 9. ANYKEY :To select the top menu on screen display (Repeat or Play Option). MENU MENU 00588A(00)-VR320-2/XAA-eng 6/7/05 7:14 PM Page 46 P layback Play Option Mode The Play Option can be used with an Audio CD or MP3 in the Play or Stop mode. 1 Press the ANYKEYbutton during playback. Repeat mode will be highlighted. • During Stop, Play option will be highlighted. 2 Press the œ √buttons to select Play Option. 3 Press the ...†buttons to select a desired Play Option, then press the ENTER button. •Normal:Tracks on a disc are played in the order in which they were recorded on the disc. •Random:The Random option plays a disc’s tracks in random order. After a random list is generated and played completely, another random list is generated and played. Random Play is continued until the play option is changed. •Intro:The first 10 seconds of each track will be played.If you want to listen to the music that you have selected, press the ENTERbutton or √ll button. The play option will be changed to Normal Play. When Intro Play is completed, Normal Play is performed. • Playlist:The Playlist playback option allows you to select the order in which you want tracks to play. You can register a maximum 30 tracks in the playlist. 1 Press the ANYKEYbutton during playback. Repeat mode will be highlighted. • During Stop, Play option will be highlighted. 2 Press the œ √buttons to select Play Option. 3 Press the ...† buttons to select Playlist, then press the ENTERbutton. Playlist screen is displayed. 4 Press the ...† buttons to select tracks in the order in which you want them to play, then press the ENTER button. 5 If you playlisted a wrong track, press the √ button, then press the ...†buttons to select wrong track. …

Text truncated - open the document above for the full version.

Mia Kang From: SUNGJOO KIM [[email protected]] Sent: Monday, July 18, 2005 6:28 PM To: [email protected] Cc: randy; [email protected]; ??? ; ??? ; ??? ; ??? ; ??? Subject: Fwd: Re: Fwd: FCC ID: A3LDVDVR320A Attachments: [DVD-VR320] LBE051448.pdf Dear Gregory, Based upon your comments for subject application, I reply you as below. 1. Spurious radiated emissions were measured up through 1 GHz. Section 15.33(b)(3) requires that measurements on a super heterodyne receiver be performed up through the 2nd harmonic of the highest local oscillator. The EUT's tuner tunes up through channel 69, or 806 MHz. Was the tuner separately verified? If not, then please provide spurious radiated emission data up through the appropriate frequency, based on the 2nd harmonic of the highest lo. (ANS) As pointed out by you, we did perform the Spurious radiated emissions test up through 2 GHz.(Please refer to revised test report as attached) In case of Tuner used in this unit, was verified seperately... I hope, this reply e-mail will be helpful to you to complete review for this application, then I can get the FCC grant as soon as possible. If you have any questions or need my help, feel free contact me at any time. Sincerely... ------- Original Message ------- Sender : WOOSUNG CHO<[email protected]> E5( ?? )/Senior Engineer/R&D Management Group/Samsung Electronics Date : 2005-07-17 16:18 Title : Re: Fwd: FCC ID: A3LDVDVR320A - ------- Sung Joo Kim (Steve Kim) Product Compliance America QA Lab Samsung Electronics America SAMSUNG ELECTRONICS CO., LTD Mobile : +1-949-701-2610 Office : +1-949-975-7327 Fax : +1-949-975-7328 E-Mail : [email protected] ????? .. Local oscillator ?G??G Radiation ???G Vertification ????G???G??G????G???? .. ( ??G???G??G Certification ??G?????? ...) ?? , ???G???G??-??G??G??G????G?????? ... Radiation ???G 2G ??G?????G??G???? , 1G ???G????G?? , ???G????G ????? .. ????? , ?????G??G??G??? ... ------- Original Message ------- Sender : SUNGJOO KIM<[email protected]> Manager/Samsung America QA Lab./Samsung Electronics Date : 2005-07-13 08:04 Title : Fwd: FCC ID: A3LDVDVR320A ????? , ?G?? ! ??G FCC ID ???G??G??? ... ??G Mail ??G??G?G FCC ????G???G??G Application ?G??G PCTEST Lab ?? Review ?G?? , ???G??G???G??????? . ??G Spurious radiated emission ???G Local oscillator ?G????? (806MHz) ?G 2 ????? ?????G??? , ???G???G Test report ??G 1GHz ???G???????G????? . ??G???G??-G Tuner ?G???G Verify ???? , ?G???G???G???G???G?????G????? . ??G???? ... ------- Original Message ------- Sender : Mia Kang<[email protected]> Date : 2005-07-12 14:38 Title : FCC ID: A3LDVDVR320A - ------- Sung Joo Kim (Steve Kim) Product Compliance America QA Lab Samsung Electronics America SAMSUNG ELECTRONICS CO., LTD Mobile : +1-949-701-2610 Office : +1-949-975-7327 Fax : +1-949-975-7328 E-Mail : [email protected] xml:namespace prefix = st1 ns = "urn:schemas-microsoft- com:office:smarttags" />Gregory Czumak/PCTEST TCB Re: FCC ID: A3LDVDVR320A (DVD Recorder/ To: Steve Kim/ Samsung Electronics Co., Ltd. xml:namespace prefix = o ns = "urn:schemas- microsoft- com:office:office" /> From: Video Cassette Recorder) Applicant: Samsung Electronics Co., Ltd. Application Received: 7/08/05 Correspondence Reference Number: 250712D.A3L Confirmation Number: 1507080345 Date of Original Email: 7/12/05 Subject: Request for additional information In regards to your recent TCB application referenced above, we kindly request that you provide the following additional information. RT Questions: 1. Spurious radiated emissions were measured up through 1 GHz. Section 15.33 (b)(3) requires that measurements on a super heterodyne receiver be performed up through the 2nd harmonic of the highest local oscillator. The EUT's tuner tunes up through channel 69, or 806 MHz. Was the tuner separately verified? If not, then please provide spurious radiated emission data up through the appropriate frequency, based on the 2nd harmonic of the highest lo. The items indicated above must be submitted before processing can continue on the above referenced application. Failure to provide the requested information within 60 days of the original e-mail date may result in application dismissal and forfeiture of the filing fees. If you have any questions, please do not hesitate to contact us. Sincerely, Gregory Czumak Quality Manager Senior Certification Engineer PCTEST Engineering Laboratory, Inc. 6660-B Dobbin Road Columbia , MD 21045 410-290-6652 410-290-6654 (Fax) [email protected] This communication and its attachments contain information from PCTEST Engineering Laboratory, Inc., and is intended for the exclusive use of the recipient (s) named above. It may contain information that is confidential and/or legally privileged. Any unauthorized use that may compromise that confidentiality via distribution or disclosure is prohibited. Please notify the sender immediately if you receive this communication in error, and delete it from your computer system. Usage of PCTEST email addresses for non-business related activities is strictly prohibited. No warranty is made that the e-mail or attachment(s) are free from computer virus or other defect. Thank you.

Photograph of DVD-VR320 FCC ID : A3LDVDVR320A Fro nt View Rear View Photograph of DVD-VR320 - FCC ID : A3LDVDVR320A Front/Right/Top View Rear/Left/Bottom View

Labeling requirement FCC IDENTIFICATION & STATEMENT Location: on the label rating Location: on the label rating THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES AND THE CANADIAN ICES 003. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. FCC ID: A3LDVDVR320A MADE IN KOREA

Photograph of DVD-VR320 - FCC ID : A3LDVDVR320A Front View – Front/Top cover open Top View – DVD/VHS deck removed Photograph of DVD-VR320 - FCC ID : A3LDVDVR320A Top of Main PCB View Bottom of Main PCB View Photograph of DVD-VR320 - FCC ID : A3LDVDVR320A Top of A/V PCB View Bottom of A/V PCB View Photograph of DVD-VR320 - FCC ID : A3LDVDVR320A Top of DVD PCB View Bottom of DVD PCB View Photograph of TM-BLOCK TM-BLOCK TYPE: VQA05ASE To p V i e w Bottom View

“” “” ““ ’

Page : 1 of 96 Samsung EMC Testing and Certification Laboratory Project NO. :LBE051448 This report shall not be reproduced except in full, without the written approval of SEC EMC Testing laboratory. EMC Test Report According to FCC Part 15 Subpart B Project No. LBE051448 Equipment under Test Address 416 Maetan3-Dong,Yeongtong-Gu,Suwon-City,Gyeonggi-Do, Korea,443-742 Product Name DVD RECORDER / VIDEO CASSETTE RECORDER Model Name DVD-VR320 Manufacturer Samsung Electronics Co., Ltd Brand Name Samsung Electronics Co., Ltd Broadcasting System NTSC-M Variant Model See Page 3 FCC ID A3LDVDVR320A Date of Test June 17, ~ 28 , 2005 Issued Date June 30, 2005 Name/Position Signature Tested by Tae Young, Jang Test Engineer Reviewed by No Cheon, Park Manager of EMC Lab. Authorized by Seung Kyu, Cha Chief of EMC Lab. 1. This test reports does not constitute an endorsement by NIST/NVLAP or U.S Government. 2. This test report is to certify that the tested device properly complies with the requirements of FCC Rules and Regulations Part 15 Subpart B Unintentional Radiators. All tests necessary to show compliance to the requirements were and these results met the specifications requirement. This laboratory is registered by the NIST/NVLAP, U.S.A. The test reported herein have been performed in accordance with its terms of registration. Page : 2 of 96 Samsung EMC Testing and Certification Laboratory Project NO. :LBE051448 This report shall not be reproduced except in full, without the written approval of SEC EMC Testing laboratory. Table of Contents 1. General Information 1.1 Basic Information related Product 1.2 Detail Information related Product 1.3 Test Configuration 1.4 EUT Operating Conditions 1.5 Applied Standard 1.6 Test Facility 2. Summary of Test Results 3. Description of individual tests 3. 1 Conducted Emission 3. 2 Radiated Emission 3. 3 Output Signal Level 3. 4 Output Terminal Conducted Spurious Emission 3. 5 Ant. Transfer Switch 4. Appendix A 4.1 Test Photography 4.2 EUT Photography Page : 3 of 96 Samsung EMC Testing and Certification Laboratory Project NO. :LBE051448 This report shall not be reproduced except in full, without the written approval of SEC EMC Testing laboratory. 1. General Information 1.1 Basic Information related Product Applicant Samsung Electronics Co., Ltd Model name DVD-VR320 Applicant Address 416 Maetan3- Dong, Yeongtong-Gu, Suwon-Si, Gyeonggi-Do, Korea, 443-742 Contact Person WOOSUNG CHO Kind of product Valiant list None 1.2 Detail Information related Product Specification Page : 4 of 96 Samsung EMC Testing and Certification Laboratory Project NO. :LBE051448 This report shall not be reproduced except in full, without the written approval of SEC EMC Testing laboratory. 1.3 Operating Mode and Condition The EUT was tested in the following operating modes(at both channel 3 and 4) for the tests mention in this report : 1) DVD Recording ( NTSC Signal ) A NTSC signal(Color bar) was supplied at ch.69(801.25MHz) through the ant. Input connector 2) DVD Recording ( 1V VITS Signal ) A 1V peak-to-peak VITS signal was supplied through the video input connector for recording. 3) DVD Recording ( 5V VITS Signal ) A 5V peak-to-peak VITS signal was supplied through the video input connector for recording. 4) DVD Play In this test mode, a DVD recorded with NTSC signal was played on the EUT. 5) DVD Copy mode In this test mode, a video tape recorded with NTSC signal copy to DVD disc. 6) VCR Recording ( NTSC Signal ) A NTSC signal(Color bar) was supplied at ch.5(77.25MHz) through the ant. Input connector 7) VCR Recording ( 1V VITS Signal ) A 1V peak-to-peak VITS signal was supplied through the video input connector for recording. 8) VCR Recording ( 5V VITS Signal ) A 5V peak-to-peak VITS signal was supplied through the video input connector for recording. 9) VCR Play In this test mode, a video tape recorded with VITS signal was played on the EUT. 10) VCR Copy mode Note: The NTSC TV signal input record mode is not applicable to the antenna transfer switch test. 1.4 Equipment Modifications No equipment modifications were required. Page : 5 of 96 Samsung EMC Testing and Certification Laboratory Project NO. :LBE051448 This report shall not be reproduced except in full, without the written approval of SEC EMC Testing laboratory. 1.5 Test Configuration Used EUT and Peripherals Seq Device Model Name Serial # Maker Note A DVD RECORDER / VIDEO CASSETTE RECORDER DVD-VR320 - SAMSUNG EUT Used Cable Description Connect Cable Length [m] Shielded [Y/N]Remark Page : 6 of 96 Samsung EMC Testing and Certification Laboratory Project NO. :LBE051448 This report shall not be reproduced except in full, without the written approval of SEC EMC Testing laboratory. Block Diagram 1.6 Applied Standards List Applied Standards Test Procedure FCC Part15 Subpart B ANSI C63.4 : 2000 Page : 7 of 96 Samsung EMC Testing and Certification Laboratory Project NO. :LBE051448 This report shall not be reproduced except in full, without the written approval of SEC EMC Testing laboratory. 1.7 Test Facility General Information The sites are constructed in conformance with the requirements of ANSI C63.4 and CISPR 16-1, 16-2. This EMC Testing Lab. is accredited by Korea Laboratory Accreditation Scheme(KOLAS) which signed the International Laboratory Accreditation Cooperation (ILAC) Mutual Recognition Arrangement (MRA) for the above test item(s) and test method(s). This Lab. is operated as testing laboratory in accordance with the requirements of ISO/IEC 17025:1998. Accreditation and Listing Uncertainty Test Item Expanded Uncertainty Conducted Emission +/- 3.30 Radiated Emission +/- 5.09 (According to NAMAS Pub.NIS81) Page : 8 of 96 Samsung EMC Testing and Certification Laboratory Project NO. :LBE051448 This report shall not be reproduced except in full, without the written approval of SEC EMC Testing laboratory. 2. Summary of Test Results Result : PASS The equipment under test(EUT) has been found to comply with the applied standards. Test Name…

Text truncated - open the document above for the full version.

Page : 73 of 76 Samsung EMC Testing and Certification Laboratory Project NO. :LBE051448 This report shall not be reproduced except in full, without the written approval of SEC EMC Testing laboratory. 4. Appendix A 4.1 Test Photography Picture 1. Conducted Emission (Rear) Picture 2. Radiated Emission (Front) Page : 74 of 76 Samsung EMC Testing and Certification Laboratory Project NO. :LBE051448 This report shall not be reproduced except in full, without the written approval of SEC EMC Testing laboratory. Picture 3. Radiated Emission (Rear) Picture 4. Output Signal Level Page : 75 of 76 Samsung EMC Testing and Certification Laboratory Project NO. :LBE051448 This report shall not be reproduced except in full, without the written approval of SEC EMC Testing laboratory. Picture 5. Output Terminal Conducted Spurious Emission Picture 6. Ant. Transfer Switch