A3LEAD-R10PICO PROJECTOR

23456 121110987 Please read all Safety precautions before using your device to ensure safe and proper use. Samsung is not responsible for injuries or damages that result from improper usage or failure to follow safety precautions. Safety precautions Do not touch the power cord with wet hands, or disconnect the charger by pulling on the cord It may cause electric shock.• Be careful When you use the battery Do not apply strong pressure to or pierce the • battery. Avoid exposing your device and batteries to • very cold or very hot temperatures.. Do not allow your device to get wet: liquids can • cause serious damage. Do not allow your child or pet to suck or bite • the device. Do not let the battery contacts touch metal • object. Do not use if the product overheats Prolonged exposure of your skin to an • overheated device may cause low temperature burn symptoms, such as red spots and pigmentation Do not store your device near or in heaters, microwaves, hot cooking equipment, or high pressure containers Your device may overheat and cause a fire.• Do not expose your device to direct sunlight for extended periods of time Do not drop your device or cause impacts to your device Do not allow children to use it as they could hurt themselves and others, or damage the device This may damage the device or cause a fire.• If children use the device, make sure that they • use the device properly Keep your device in a dry place away from moisture or water Dust can cause your device to malfunction.• Humidity and all types of liquids may damage • device parts or electronic circuits. If you use the product for a long time, it may cause seizures and fainting symptoms. If you feel discomfort, stop using it immediately For service, take your device to a Samsung Service Centre Any changes or modifications to your device • can void your manufacturer’s warranty. RiskGroup 2 CAUTION. Possibly hazardous optical radiation emitted from this product. Do not stare at operating lamp. May be harmful to the eye. Product tested against IEC62471 Type A. 05/2012. Rev. 1.0 User manual Pico Projector Copyright Copyright © 2012 Samsung Electronics This user manual is protected under international copyright laws. No part of this user manual may be reproduced, distributed, translated, or transmitted in any form or by any means, electronic or mechanical, including photocopying, recording, or storing in any information storage and retrieval system, without the prior written permission of Samsung Electronics. Trademarks SAMSUNG, and the SAMSUNG logo are • registered trademarks of Samsung Electronics. Bluetooth• ® is a registered trademark of the Bluetooth SIG, Inc. worldwide. More information about Bluetooth is available at www.bluetooth.com. All other trademarks and copyrights are the • property of their respective owners. The supplied items may vary. • Tripod and HDMI cables are sold • separately. Overview Buttons functions Slide the power key left or right to turn the projector on or off. Press the button to adjust the focus and definition of the screen. Charging the device Installing the battery Install the battery before charging the projector. Press and slide the battery cover with both 1 thumbs. Insert the new battery as shown in the 2 above drawing. Close the battery cover. 3 As the battery is consumable, the battery life will drain gradually. When the battery life is significantly depleted, replace the new battery. Charging time and standard operating time ConnectionProjector Multimedia relay function Operating time About 2 hoursAbout 5 hours Charging time About 3 hours (when powered off ) Depending on the status of the • charge and the environment, the actual time may vary. Charging automatically pauses if the • projector is being used at the same time. When overheating, status LED blinks • purple. Checking the battery level Press the two focus adjustment buttons simultaneously. Depending on the battery level, the status LED will automatically blinks in the following colours. Battery levelStatus LED color Above 80%Blue 80%~10%Purple Below 10%Red When using the projector with the travel adapter connected, the status LED turns purple. Charging the battery This projector has a rechargeable battery. Make sure the projector is fully charged before using it for the first time. Use only Samsung-approved chargers and cables. Connect the travel adapter to the charger 1 input jack on the projector. During charging, the status LED will turn red. If charging does not begin, unplug the charger and plug it in again. When fully charged, the status LED changes 2 to blue. Unplug the charger from the wall outlet and the projector. Graphics used in this manual are for illustration purposes. The actual products may vary. Unpack ProjectorBattery Travel adapter *5 to 11 pin connector 5 pin MHL cable * Data synchronization is unavailable when you connect 5 to 11 pin connectors to your PC via a data cable. www.samsung.com HDMI output port Focus adjustment button Speaker Lens Tripod mount Headset jack Status LED MHL/HDMI input port Power key Charger input jack 222019 1817161513 Using the projector You can enjoy a variety multimedia on your HDMI supported device (TV, monitor). The projector may not be compatible • or may intermittently lose connection depending on some product/OS versions. Using the projector for extended • periods will drain the battery quickly. Turn the projector off when not in use to avoid wasting power. When you use the projector, connect • to a charger. Although the battery is not fully charged, the projector is supplied with the necessary power for stable use. Part of screen may be cut if its • projection is too big or small compared to the stored image on the mobile device or laptop. The screen may be distorted if it is • projected in at angle or used with some lenses. Connecting the projector to a mobile device Slide the power key ON and turn the 1 projector on. Using a 5 to 11pin cable, connect the 2 projector to a mobile…

Text truncated - open the document above for the full version.

Date: May 15, 2012 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 c.c. Compliance Certification Services Certification Division 47173 Benicia Street Fremont, CA 94538, USA To whom it may concern: I, the undersigned, hereby authorize Lab Manager Charles. Kim (or Feel. Jeong) and of SGS Korea Co., Ltd and hereafter referred to as SGS Korea, to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by Lab Manager Charles. Kim (or Feel. Jeong) of SGS Korea Co., Ltd on our behalf shall have the same effect as acts of our own. I, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). In authorizing SGS Korea as our agent, we still recognize that we are responsible to: a) comply with the relevant provisions of the certification program; b) make all necessary arrangements for the conduct of the evaluation, including provision for examining documentation and access to all areas, records (including internal audit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment, surveillance, reassessment) and resolution of complaints; c) make claims regarding certification only in respect of the scope for which certification has been granted; d) do not use our product certification in such a manner as to bring the Certification Division into disrepute and not make any statement regarding our product certification which the Certification Division may consider misleading or unauthorized; e) upon suspension or cancellation of certification, discontinue use of all advertising matter that contains any reference thereto and return any certification documents as required by the Certification Division; f) use certification only to indicate the products are certified as being in conformity with specified standards; g) endeavor to ensure that no certificate or report nor any part thereof is used in a misleading manner; h) ensure that any reference to our product certification in communication media such as documents, brochures or advertising, complies with the requirements of the Certification Division; i) keep a record of all complaints made known to the us relating to the product’s compliance with requirements of the relevant standard and to make these records available to the Certification Division when requested; j) take appropriate action with respect to such complaints and any deficiencies found in products or services that affect compliance with the requirements for certification; k) document the actions taken. This authorization is valid until further written notice from the applicant. Sincerely Yours, Sang Kyung (Peter) Ra / General Manager Samsung Electronics Co., Ltd.

Date: May 15, 2012 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road, Columbia, MD 21046 RE: Request of Confidentiality for FCC ID: A3LEAD-R10 To Whom It May Concern: Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules (CFR 47), and Section 552 (b) (4) of the Freedom of Information Act, Samsung Electronics Co., Ltd. hereby requests confidentiality and treatment of certain information accompanying this application. The materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. We are also hereby request Short-Term Confidentiality for 180 days after the grant as outlined in Public Notice DA 04-1705. This provision will give Samsung Electronics Co., Ltd temporary confidentiality of commercially sensitive information prior to product release. The requested Permanent and Temporary Confidential exhibits are listed as follows: CONFIDENTIAL LIST 1 Block Diagram Permanent 2 External Photos 3 Internal Photos 4 Test-Setup Photos Short-Term 5 User’s Manual The Applicant understands that pursuant to Rule 0.457, disclosure of this application and all accompanying documentations, where applicable, will not be made public before the date of the Grant for this application. Sincerely Yours, Sang Kyung (Peter) Ra / General Manager Samsung Electronics Co., Ltd.

Test Report No. : F690501/RF-EMG004416 Page : 18 of 33 Front View Rear View Test Report No. : F690501/RF-EMG004416 Page : 24 of 33 Travel Adapter Travel Adapter Label Test Report No. : F690501/RF-EMG004416 Page : 25 of 33 Ear-Phone HDMI Cable

FCC/IC Label 1. FCC/IC Label Drawing SAMSUNG ELECTRONICS CO., LTD. Model : WB850F FCC ID : A3LWB850F IC: 649E-WB850F Made in China G 2. FCC/IC Label Location i–››–”Gš‹ŒG–Gl|{GGi–››–”Gš‹ŒG–Gl|{GG

Test Report No. : F690501/RF-EMG004416 Page : 19 of 33 Front View of Lens Rear View of Lens Test Report No. : F690501/RF-EMG004416 Page : 20 of 33 Top View of Main Board Bottom View of Main Board Test Report No. : F690501/RF-EMG004416 Page : 21 of 33 Top View of Sub Board Bottom View of Sub Board Test Report No. : F690501/RF-EMG004416 Page : 22 of 33 Top View of Zoom Key Board Bottom View of Zoom Key Board Test Report No. : F690501/RF-EMG004416 Page : 23 of 33 Top View of Battery Bottom View of Battery Test Report No. : F690501/RF-EMG004416 Page : 26 of 33 Inside

Test Report No. : F690501/RF-EMG004416 Page : 2 of 33 Contents 1. General Information ................................................................................................... 3 1.1 Client Information ................................................................................................ 3 1.2 Test Laboratory ................................................................................................... 3 1.3 General Information of E.U.T. ............................................................................. 4 1.4 Operating Modes and Conditions ........................................................................ 4 1.5 Auxiliary Equipments .......................................................................................... 4 1.6 Cable List ............................................................................................................ 5 1.7 System Configurations ........................................................................................ 6 1.8 Test System Layout ............................................................................................ 6 1.9 Modifications ....................................................................................................... 7 1.10 Applicable Standards for Testing ...................................................................... 7 1.11 Summary of Test Results .................................................................................. 7 2. Emission Test ............................................................................................................ 8 2.1 Test Results ........................................................................................................ 8 2.2 Test Method and Limits ....................................................................................... 8 2.2.1 Test Method ............................................................................................... 8 2.2.2 Test Limits .................................................................................................. 8 2.3 Conducted Emission ........................................................................................... 9 2.3.1 Test Equipments ........................................................................................ 9 2.3.2 Test Site ..................................................................................................... 9 2.3.3 Environment Conditions ........................................................................... 10 2.4 Radiated Emission ............................................................................................ 12 2.4.1 Test Equipments ...................................................................................... 12 2.4.2 Test Site ................................................................................................... 12 2.4.3 Environment Conditions ........................................................................... 13 2.5 Photographs of Conducted Emission ................................................................ 15 2.6 Photographs of Radiated Emission (3 method below 1) ............................ 16 2.7 Photographs of Radiated Emission (3 method above 1) ........................... 17 3. Photographs of EUT ................................................................................................ 18 Appendix A : Conducted Emission .............................................................................. 27 Appendix B : Radiated Emission (3 Scan Data) ........................................................ 30 Test Report No. : F690501/RF-EMG004416 Page : 3 of 33 1. General Information 1.1 Client Information Applicant : SAMSUNG ELECTRONICS CO., LTD. Address of Applicant : 416, Maetan 3 dong, Yeongtong-gu, Suwon-city, Gyeonggi-do, Korea Manufacturer : Samsung Electronics Huizhou Co., Ltd. Address of Manufacturer : Chenjiang, Town, Huizhou City, Guangdong Province, China 1.2 Test Laboratory Name and Address : SGS Korea Co., Ltd. (Gunpo Laboratory) 18-34, Sanbon-dong, Gunpo, Gyeonggi-do, Korea 435-040 FCC Registration No. : 367021 IC Company No. : 4620F Phone : + 82 31 428 5700 Fax : + 82 31 427 2370 e-mail : [email protected] Test Report No. : F690501/RF-EMG004416 Page : 4 of 33 1.3 General Information of E.U.T. Product Name PICO PROJECTOR Model Name EAD-R10 Serial No. - Hardware Version REV1.0 Software Version SW1.0 FCC ID A3LEAD-R10 IC Number 649E-EAD-R10 EMI Classification Class B Rated Voltage Input (100 ~ 240) ., (50/60), 0.35 Output 5 ., 2 Test Voltage 120 , 60 (Travel Adapter) Battery 3.7 ., 1650 , 6.11 Highest Internal Frequency Max. 222 1.4 Operating Modes and Conditions Operating mode Operating condition Mode 1 MHL Sink Mode MHL Sink Mode Mode 2 HDMI Sink Mode HDMI Sink Mode Mode 3 MHL Dongle Mode MHL Dongle Mode 1.5 Auxiliary Equipments Description Model Serial No. Manufacturer Mobile Phone SHV-E160S R33C210HZWW Samsung Electronics Co., Ltd. Mobile Phone GT-I9250 R27BB67822L Samsung Electronics Co., Ltd. GALAXY Player YP-GB70 131B620043 Samsung Electronics Co., Ltd. PICO Projector EAD-R10 - Samsung Electronics Co., Ltd. Note: Auxiliary equipments are declared according to FCC procedure. Test Report No. : F690501/RF-EMG004416 Page : 5 of 33 1.6 Cable List Start END Cable Spec. Name I/O Port Name I/O Port Length Shield MHL Sink Mode PICO Projector DC IN Travel Adapter DC OUT 1.4 Shield MHL HDMI IN Phone MHL 1.5 Shield Audio OUT Ear-Phone - 1.4 Shield Travel Adapter AC IN AC Source - - - HDMI Sink Mode PICO Projector DC IN Travel Adapter DC OUT 1.4 Shield MHL HDMI IN GALAXY Player Mini HDMI1.7 Shield Audio OUT Ear-Phone - 1.4 Shield Travel Adapter AC IN AC Source - - - MHL Dongle Mode PICO Projector (EUT) DC IN Travel Adapter DC OUT 1.4 Shield MHL HDMI IN Phone MHL 1.5 Shield HDMI OUT PICO Projector MHL HDMI IN 1.4 Shield Travel Adapter AC IN AC Source - - - Test Report No. : F690501/RF-EMG004416 Page : 6 of 33 1.7 System Configurat…

Text truncated - open the document above for the full version.

Test Report No. : F690501/RF-EMG004416 Page : 15 of 33 2.5 Photographs of Conducted Emission Test Report No. : F690501/RF-EMG004416 Page : 16 of 33 2.6 Photographs of Radiated Emission (3O method below 1 Ꮏ ) Test Report No. : F690501/RF-EMG004416 Page : 17 of 33 2.7 Photographs of Radiated Emission (3O method above 1 Ꮏ )