A3LGTS6102B850/1900 GSM/GPRS/WCDMA Phone (BT,WLAN,EDGE-Rx)

User manual GT-S6102B Draft 6 2011-12-23 Only for Marketing using this manual This user manual has been specially designed to guide you through the functions and features of your mobile phone. To get started quickly, refer to “introducing your mobile phone, Instructional icons Before you start, familiarise yourself with the icons you will see in this manual: Warning—situations that could cause injury to yourself or others Caution—situations that could cause damage to your phone or other equipment Note—notes, usage tips, or additional information X Refer to—pages with related information; for example: X p. 12 (represents “see page 12”) Õ Followed by—the order of options or menus you must select to perform a step; for example: In Menu mode, select Messages Õ Create new message (represents Messages, followed by Create new message) [ ] Square brackets—phone keys; for example: [](represents the Power/ Menu exit key) < > Angled brackets—softkeys that control different functions at each screen; for example: <OK> (represents the OK softkey) Copyright information Rights to all technologies and products that comprise this device are the property of their respective owners: z Bluetooth ® is a registered trademark of the Bluetooth SIG, Inc. worldwide z Java™ is a trademark of Sun Microsystems, Inc. z Windows Media Player ® is a registered trademark of Microsoft Corporation. contents safety and usage information Safety warnings Safety precautions Important usage information introducing your mobile phone Unpack .. Phone layout Keys Display Icons assembling and preparing your mobile phone Install the SIM card and battery Charge the battery using basic functions Turn your phone on and off Access menus Customise your phone Use basic call functions Send and view messages Add and find contacts troubleshooting safety and usage information Comply with the following precautions to avoid dangerous or illegal situations and ensure peak performance of your mobile phone. Safety warnings Keep your phone away from small children and pets Keep your phone and all accessories out of the reach of small children or animals. Small parts may cause choking or serious injury if swallowed. Protect your hearing Excessive exposure to sound at high volumes can cause hearing damage. Always turn the volume down before plugging the earphones into an audio source and use only the minimum volume setting necessary to hear your conversation or music. Install mobile phones and equipment with caution Ensure that any mobile phones or related equipment installed in your vehicle are securely mounted. Avoid placing your phone and accessories near or in an air bag deployment area. Improperly installed wireless equipment can cause serious injury when air bags inflate rapidly. Handle and dispose of batteries and chargers with care z Use only Samsung-approved batteries and chargers specifically designed for your phone. Incompatible batteries and chargers can cause serious injuries or damage to your phone. z Never dispose of batteries or phones in a fire. Follow all local regulations when disposing used batteries or phones. z Never place batteries or phones on or in heating devices, such as microwave ovens, stoves, or radiators. Batteries may explode when overheated. z Never crush or puncture the battery. Avoid exposing the battery to high external pressure, which can lead to an internal short circuit and overheating. Avoid interference with pacemakers Maintain a minimum of 15 cm (6 inches) between mobile phones and pacemakers to avoid potential interference, as recommended by manufacturers and the independent research group, Wireless Technology Research. If you have any reason to suspect that your phone is interfering with a pacemaker or other medical device, turn off the phone immediately and contact the manufacturer of the pacemaker or medical device for guidance. Turn off the phone in potentially explosive environments Do not use your phone at refuelling points (service stations) or near fuels or chemicals. Turn off your phone whenever directed by warning signs or instructions. Your phone could cause explosions or fire in and around fuel or chemical storage and transfer areas or blasting areas. Do not store or carry flammable liquids, gases, or explosive materials in the same compartment as the phone, its parts, or accessories. Reduce the risk of repetitive motion injuries When sending text messages or playing games on your phone, hold the phone with a relaxed grip, press the keys lightly, use special features that reduce the number of keys you have to press (such as templates and predictive text), and take frequent breaks. Safety precautions Drive safely at all times Avoid using your phone while driving and obey all regulations that restrict the use of mobile phones while driving. Use hands-free accessories to increase your safety when possible. Follow all safety warnings and regulations Comply with any regulations that restrict the use of a mobile phone in a certain area. Use only Samsung-approved accessories Using incompatible accessories may damage your phone or cause injury. Turn off the phone near medical equipment Your phone can interfere with medical equipment in hospitals or health care facilities. Follow all regulations, posted warnings, and directions from medical personnel. Turn off the phone or disable the wireless functions when in an aircraft Your phone can cause interference with aircraft equipment. Follow all airline regulations and turn off your phone or switch to a mode that disables the wireless functions when directed by airline personnel. Protect batteries and chargers from damage Avoid exposing batteries to very cold or very hot temperatures (below 0° C/32° F or above 45° C/ 113° F). Extreme temperatures can reduce the charging capacity and life of your batteries. Prevent batteries from contacting metal objects, as this can create a connection between the + and - terminals of your batteries and lead to temporary or per…

Text truncated - open the document above for the full version.

Date: December 19, 2011 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Subject: Request for Confidentiality FCC ID: A3LG T6102B To Whom It May Concern: Pursuant to the provisions of Sections 0.457 and 0.459 of the Commission’s rules (47 CFR §§ 0.457, 0.459), we are requesting the Commission to withhold the following attachments as confidential document from public disclosure indefinitely. Schematics Block Diagram Operational Description Antenna Specification Parts List Tune-Up Procedure Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In additional to above mentioned documents, pursuant to Public Notice DA 04-1705 of the Commission’s policy, in order to comply with the marketing regulations in 47 CFR §2.803 and the importation rules in 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We are requesting the commission to grant short-term confidentiality request on the following attachments until 180 days External Photos Internal Photos Test Setup Photos User Manual It is our understanding that all measurement test reports, FCC ID label format and correspondence during certification review process cannot be granted as confidential documents and such information will be available for public review once the grant of equipment authorization is issued. Best Regards Sang Kyung (Peter), Ra/ General Manager Samsung Electronics CO. LTD TEL: 310-900-5250 FAX: 310-537-5500 E-mail: [email protected]

Date: February 9, 2011 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 c.c. Compliance Certification Services Certification Division 47173 Benicia Street Fremont, CA 94538, USA To whom it may concern: I, the undersigned, hereby authorize Ms. Claire Hoque/Application Examiner of UL CCS, to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by Ms. Claire Hoque of UL CCS on our behalf shall have the same effect as acts of our own. I, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). In authorizing UL CCS as our agent, we still recognize that we are responsible to: a) comply with the relevant provisions of the certification program; b) make all necessary arrangements for the conduct of the evaluation, including provision for examining documentation and access to all areas, records (including internal audit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment, surveillance, reassessment) and resolution of complaints; c) make claims regarding certification only in respect of the scope for which certification has been granted; d) do not use our product certification in such a manner as to bring the Certification Division into disrepute and not make any statement regarding our product certification which the Certification Division may consider misleading or unauthorized; e) upon suspension or cancellation of certification, discontinue use of all advertising matter that contains any reference thereto and return any certification documents as required by the Certification Division; f) use certification only to indicate the products are certified as being in conformity with specified standards; g) endeavor to ensure that no certificate or report nor any part thereof is used in a misleading manner; h) ensure that any reference to our product certification in communication media such as documents, brochures or advertising, complies with the requirements of the Certification Division; i) keep a record of all complaints made known to the us relating to the product’s compliance with requirements of the relevant standard and to make these records available to the Certification Division when requested; j) take appropriate action with respect to such complaints and any deficiencies found in products or services that affect compliance with the requirements for certification; k) document the actions taken. This authorization is valid until further written notice from the applicant. Sincerely Yours, Sang Kyung (Peter), Ra/ General Manager Samsung Electronics CO. LTD TEL: 310-900-5250 FAX: 310-537-5500 E-mail: [email protected] REMARK: 1. This authorization letter will be sent along with your application when filing with the Certification Division. 2. Please follow the format and type it on company letterhead and send original to us. 3. Authorized signature must be in agreement with grantee code contact in FCC database.

Label and Location Samsung Phone Model: GT-S6102B FCC ID : A3LGTS6102 B Labe l: Location: Top Back plate of GT-S6102B Bottom Label is placed inside of the battery compartment. MODELO: GT-S6102B FCC ID: A3LGTS6102B SSN: -S6102BGSMH ALIMENTACION: 3,7 V ; 1000 mA INDUSTRIA BRASILEÑA/HECHO EN BRASIL TELEFONO CELULAR/CELLULAR PHONE MODELO: GT-S6102B FCC ID: A3LGTS6102B SSN: -S6102BGSMH ALIMENTACION: 3,7 V ; 1000 mA INDUSTRIA BRASILEÑA/HECHO EN BRASIL TELEFONO CELULAR/CELLULAR PHONE

SAR TEST REPORT HCT CO., LTD EUT Type: 850/1900 GSM/GPRS and 850 WCDMA Phone with Bluetooth, WLAN and EDGE Rx Only FCC ID: A3LGTS6102B Model: GT-S6102B Date of Issue: Dec.28, 2011 Test report No.: HCTA1112FS06 Test Laboratory: HCT CO., LTD. 105-1, Jangam-ri, Majang-myeon, Icheon-si, Gyeonggi-do, Korea 467-811 TEL: +82 31 645 6485 FAX: +82 31 645 6401 Applicant : SAMSUNG Electronics Co., Ltd. 416 Maetan3-Dong, YeongTong-Gu, Suwon-Si, Gyeonggi-Do, Korea, 443-742 Testing has been carried out in accordance with: RSS-102 Issue 4; Health Canada Safety Code 6 47CFR §2.1093 FCC OET Bulletin 65(Edition 97-01), Supplement C (Edition 01-01) ANSI/ IEEE C95.1 – 1992 IEEE 1528-2003 Test result: The tested device complies with the requirements in respect of all parameters subject to the test. The test results and statements relate only to the items tested. The test report shall not be reproduced except in full, without written approval of the laboratory. Signature Report prepared by Approved by : Young-Soo Jang : Jae-Sang So Test Engineer of SAR Part Manager of SAR Part Report No.: HCTA1112FS06 FCC ID: A3LGTS6102B Date of Issue: Dec. 28, 2011 HCT CO., LTD. 105-1, Jangam-ri, Majang-myeon, Icheon-si,Gyeonggi-do,Korea 467-811 TEL: +82 31 645 64851 FAX: +82 31 645 6401 www.hct.co.kr 2 of 143 Table of Contents 1. INTRODUCTION .................................................................................................................................... ３ 2. DESCRIPTION OF DEVICE .................................................................................................................... ４ 3. DESCRIPTION OF TEST EQUIPMENT .................................................................................................. ５ 4. SAR MEASUREMENT PROCEDURE ................................................................................................. １２ 5. DESCRIPTION OF TEST POSITION .................................................................................................. １３ 5.1 HEAD POSITION ....................................................................................................................... １３ 5.2 Body Holster/Belt Clip Configurations ......................................................................................... １４ 6. MEASUREMENT UNCERTAINTY ....................................................................................................... １５ 7. ANSI/ IEEE C95.1 - 1992 RF EXPOSURE LIMITS .............................................................................. １６ 8. SYSTEM VERIFICATION .................................................................................................................... １７ 8.1 Tissue Verification ...................................................................................................................... １７ 8.2 System Validation ...................................................................................................................... １８ 8.3 System Validation Procedure ..................................................................................................... １８ 9. RF CONDUCTED POWER MEASUREMENT ..................................................................................... １９ 9.1 GSM .......................................................................................................................................... １９ 9.2 WCDMA ..................................................................................................................................... ２１ 9.3 WiFi ........................................................................................................................................... ２２ 10. SAR Test configuration & Antenna Information................................................................................... ２４ 11. SAR Considerations for Multiple Transmitters and Antennas .............................................................. ２５ 12. SAR TEST DATA SUMMARY ............................................................................................................ ２９ 12.1 Measurement Results (GSM850 Head SAR) ............................................................................ ２９ 12.2 Measurement Results (GSM1900 Head SAR) .......................................................................... ３０ 12.3 Measurement Results (GPRS850 VoIP Head SAR) .................................................................. ３１ 12.4 Measurement Results (GPRS1900 VoIP Head SAR) ................................................................ ３２ 12.5 Measurement Results (WCDMA850 Head SAR)....................................................................... ３３ 12.6 Measurement Results (802.11b/g/n Head) ................................................................................ ３４ 12.7 Measurement Results (GSM850 Hotspot SAR) ........................................................................ ３５ 12.8 Measurement Results (GSM1900 Hotspot SAR)....................................................................... ３６ 12.9 Measurement Results (WCDMA850 Hotspot Body SAR) .......................................................... ３７ 12.10 Measurement Results (802.11b/g/n Hotspot SAR) .................................................................. ３８ 13. CONCLUSION .................................................................................................................................. ３９ 14. REFERENCES ................................................................................................................................. ４０ Attachment 1. – SAR Test Plots............................................................................................................... ４１ Attachment 2. – Dipole Validation Plots ................................................................................................... ９２ Attachment 3. – Probe Calibration Data .................................................................................…

Text truncated - open the document above for the full version.

FCC ID: A3LGTS6102B Report No.: HCTE1201FE01 Date: January 03, 2012 HCT CO., LTD. 105-1, JANGAM-RI, MAJANG-MYEON, ICHEON-SI, KYOUNGKI-DO, KOREA TEL: +82 31 645 6300 FAX: +82 31 645 6401 www.hct.co.kr Page 2 of 17 TABLE OF CONTENTS PAGE 1. GENERAL INFORMATION ....................................................................................................... 3 1.1 Product Description ................................................................................................................. 3 1.2 Related Submittal(s) / Grant(s)................................................................................................ 3 1.3 Tested System Details.............................................................................................................. 4 1.4 Cable Description .................................................................................................................... 5 1.5 Noise Suppression Parts on Cable. (I/O cable) ....................................................................... 5 1.6 Test Methodology .................................................................................................................... 6 1.7 Test Facility ............................................................................................................................. 6 1.8 Frequency Range of Radiated Measurements ......................................................................... 6 2. SYSTEM TEST CONFIGURATION........................................................................................... 7 3. PRELIMINARY TEST ................................................................................................................. 7 3. PRELIMINARY TEST ................................................................................................................. 8 3.1 Conducted Emission Test ........................................................................................................ 8 3. 2 Radiated Emission Test .......................................................................................................... 8 4. CONDUCTED AND RADIATED EMISSION TEST SUMMARY ........................................... 9 4.1 Conducted Emission Test ........................................................................................................ 9 4.2 Radiated Emission Test ......................................................................................................... 14 5. FIELD STRENGTH CALCULATION ...................................................................................... 15 6. TEST EQUIPMENT................................................................................................................... 16 7. CONCLUSION .......................................................................................................................... 17 ATTACHMENT: TEST SETUP PHOTOGRAPHS FCC ID: A3LGTS6102B Report No.: HCTE1201FE01 Date: January 03, 2012 HCT CO., LTD. 105-1, JANGAM-RI, MAJANG-MYEON, ICHEON-SI, KYOUNGKI-DO, KOREA TEL: +82 31 645 6300 FAX: +82 31 645 6401 www.hct.co.kr Page 3 of 17 1. GENERAL INFORMATION 1.1 Product Description Equipment Under Test (E.U.T) is 850/1900 GSM/GPRS and 850 WCDMA Phone with Bluetooth, WLAN / Model: GT-S6102B manufactured by SAMSUNG ELECTRONICS CO., LT D . Its basic purpose is used for communications. Model (s) GT-S6102B FCC ID A3LGTS6102B E.U.T Type 850/1900 GSM/GPRS and 850 WCDMA Phone with Bluetooth, WLAN TX Frequency 824.20 ㎒ to 848.80 ㎒ (GSM 850) 1 850.20 ㎒ to 1 909.80 ㎒ (GSM 1 900) 826.40 ㎒ to 846.60 ㎒ (WCDMA 850) RX Frequency 869.20 ㎒ to 893.80 ㎒ (GSM 850) 1 930.20 ㎒ to 1 989.80 ㎒ (GSM 1 900) 871.40 ㎒ to 891.60 ㎒ (WCDMA 850) 1.2 Related Submittal(s) / Grant(s) Original submittal only. FCC ID: A3LGTS6102B Report No.: HCTE1201FE01 Date: January 03, 2012 HCT CO., LTD. 105-1, JANGAM-RI, MAJANG-MYEON, ICHEON-SI, KYOUNGKI-DO, KOREA TEL: +82 31 645 6300 FAX: +82 31 645 6401 www.hct.co.kr Page 4 of 17 1.3 Tested System Details All equipment descriptions used in the tested system (including inserted cards) are: Device Type Manufacturer Model Number FCC ID / DoC Connected To 850/1900 GSM/GPRS and 850 WCDMA Phone with Bluetooth, WLAN SAMSUNG GT-S6102B A3LGTS6102B Notebook PC Notebook PC SAMSUNG NT-R519 DoC E.U.T Notebook PC adaptor Notebook PC adaptor DELTA (JIANG SU) SADP-90FH BAD-9019S - Notebook PC Mouse PRIMAX ELECTRONICS MOARUO DoC Notebook PC Headset - - - E.U.T USB cable - - - E.U.T Notebook PC SD card (2 GB) SanDisk - - E.U.T RJ45 cable - - - Notebook PC Router - HIGATE PLUS K12L012.00 - Notebook PC FCC ID: A3LGTS6102B Report No.: HCTE1201FE01 Date: January 03, 2012 HCT CO., LTD. 105-1, JANGAM-RI, MAJANG-MYEON, ICHEON-SI, KYOUNGKI-DO, KOREA TEL: +82 31 645 6300 FAX: +82 31 645 6401 www.hct.co.kr Page 5 of 17 1.4 Cable Description Product Name Port Power Cord Shielded (Y/N) I/O Cable Shielded (Y/N) Length (m) Micro USB Y Y (P,D)0.8 850/1900 GSM/GPRS and 850 WCDMA Phone with Bluetooth, WLAN Headset jack - N (D)1.5 RJ 45 - N (D)2.0 Notebook PC USB (Mouse) Y Y (D)1.8 * The marked "(D)" means the data cable and "(P)" means the power cable. 1.5 Noise Suppression Parts on Cable. (I/O cable) Product Name Port Ferrite Bead (Y/N) Location Metal Hood (Y/N) Location Micro USB N - Y Both End 850/1900 GSM/GPRS and 850 WCDMA Phone with Bluetooth, WLAN Headset jack N - Y E.U.T End RJ 45 N - N Both End Notebook PC USB (Mouse) N - Y Notebook PC End FCC ID: A3LGTS6102B Report No.: HCTE1201FE01 Date: January 03, 2012 HCT CO., LTD. 105-1, JANGAM-RI, MAJANG-MYEON, ICHEON-SI, KYOUNGKI-DO, KOREA TEL: +82 31 645 6300 FAX: +82 31 645 6401 www.hct.co.kr Page 6 of 17 1.6 Test Methodology Both Conducted and Radiated testing was performed according to the procedures in ANSI C63.4/2003. Radiated testing was performed at an antenna to E.U.T distance of 3 m 1.7 Test Facility The 10 m semi anechoic chamber used to collect the test data is located at the 105-1, Jangam-Ri, Majang-Myeon, Icheon-Si, Kyoungki-…

Text truncated - open the document above for the full version.

FCCGPT.15.247 TEST REPORT FCC CERTIFICATION REPORT www.hct.co.kr Test Report No. HCTR1201FR03 Date of Issue: January 03, 2012 EUT Type: 850/1900 GSM/GPRS and 850 WCDMA Phone with Bluetooth, WLAN and EDGE Rx Only FCC ID: A3LGTS6102B Page୎ of 117 Version TEST REPORT NO. DATE DESCRIPTION HCTR1201FR03 January 03, 2012 - First Approval Report FCCGPT.15.247 TEST REPORT FCC CERTIFICATION REPORT www.hct.co.kr Test Report No. HCTR1201FR03 Date of Issue: January 03, 2012 EUT Type: 850/1900 GSM/GPRS and 850 WCDMA Phone with Bluetooth, WLAN and EDGE Rx Only FCC ID: A3LGTS6102B Page୏ of 117 Table of Contents 1. GENERAL INFORMATION ..........................................................................................................................எ 2. EUT DESCRIPTION ..................................................................................................................................... எ 3. TEST METHODOLOGY ............................................................................................................................... ஏ 3.1 EUT CONFIGURATION ...................................................................................................................... ஏ 3.2 EUT EXERCISE .................................................................................................................................. ஏ 3.3 GENERAL TEST PROCEDURES ...................................................................................................... ஏ 3.4 DESCRIPTION OF TEST MODES ..................................................................................................... ஏ 4. INSTRUMENT CALIBRATION..................................................................................................................... ஐ 5. FACILITIES AND ACCREDITATIONS ......................................................................................................... ஐ 5.1 FACILITIES ......................................................................................................................................... ஐ 5.2 EQUIPMENT ....................................................................................................................................... ஐ 6. ANTENNA REQUIREMENTS ...................................................................................................................... ஑ 7. SUMMARY TEST OF RESULTS ................................................................................................................. ஒ 8. TEST RESULT ............................................................................................................................................. ஓ 8.1 6dB BANDWIDTH MEASUREMENT (802.11b/g/n) .......................................................................... ஓ 8.2 OUTPUT POWER MEASUREMENT (802.11b/g/n) ....................................................................... ஋ஐ 8.3 POWER SPECTRAL DENSITY (802.11b/g/n) ............................................................................... ஒ஍ 8.4 OUT OF BAND EMISSIONS AT THE BAND EDGE/ CONDUCTED SPURIOUS EMISSIONS ... ஒஓ 8.5 RADIATED MEASUREMENT. ..................................................................................................... ஋ஊ஍ 8.5.1 RADIATED SPURIOUS EMISSIONS. ............................................................................... ஋ஊ஍ 8.5.2 RADIATED RESTRICTED BAND EDGE MEASUREMENTS .......................................... ஋஋஋ 8.6 POWERLINE CONDUCTED EMISSIONS .................................................................................. ஋஋஌ 9. LIST OF TEST EQUIPMENT ..................................................................................................... ........... ஋஋஑ FCCGPT.15.247 TEST REPORT FCC CERTIFICATION REPORT www.hct.co.kr Test Report No. HCTR1201FR03 Date of Issue: January 03, 2012 EUT Type: 850/1900 GSM/GPRS and 850 WCDMA Phone with Bluetooth, WLAN and EDGE Rx Only FCC ID: A3LGTS6102B Page୐ of 117 G 1. GENERAL INFORMATION G Applicant: SAMSUNG Electronics Co., Ltd. Address: 416, Maetan-3dong, Yeongtong-gu, Suwon-si, Gyeonggi-do, Korea FCC ID: A3LGTS6102B EUT Type: 850/1900 GSM/GPRS and 850 WCDMA Phone with Bluetooth, WLAN and EDGE Rx Only Model Name: GT-S6102B Date(s) of Tests: December 222011 ~ January 02, 2012 Contact Person: Name: Nam Gun Kim Phone #: +82-31-301-2797 Place of Tests: HCT Co., Ltd. 105-1, Jangam-ri , Majang-Myeon, Icheon-si, Kyunggi-Do, 467-811, KOREA. (IC Recognition No. : 5944A-3) G 2. EUT DESCRIPTION EUT Type 850/1900 GSM/GPRS and 850 WCDMA Phone with Bluetooth, WLAN and EDGE Rx Only Model Name GT-S6102B Version Hardware : REV1.0/ Software : S6102B.010 Power Supply DC 3.7 V Battery type Li-ion Battery(Standard) Frequency Range TX: 2412 MHz ~ 2462 MHz RX: 2412 MHz ~ 2462 MHz Max. RF Output Power: Peak: Wi-Fi 802.11b(22.59 dBm) / Wi-Fi 802.11g (22.45 dBm) / Wi-Fi 802.11n (22.25 dBm) Average: Wi-Fi 802.11b(16.09 dBm) / Wi-Fi 802.11g (13.90 dBm) / Wi-Fi 802.11n (13.77 dBm) Modulation Type DSSS/CCK(802.11b), OFDM(802.11g, 802.11n) Antenna Specification Manufacturer: Partron Antenna type: FPCB Antenna Peak Gain : 0.42 dBi FCCGPT.15.247 TEST REPORT FCC CERTIFICATION REPORT www.hct.co.kr Test Report No. HCTR1201FR03 Date of Issue: January 03, 2012 EUT Type: 850/1900 GSM/GPRS and 850 WCDMA Phone with Bluetooth, WLAN and EDGE Rx Only FCC ID: A3LGTS6102B Page୑ of 117 3. TEST METHODOLOGY The measurement procedure described in the American National Standard for Methods of Measurement of Radio-Noise Emission from Low-Voltage Electrical and Electronic Equipment in the Range of 9kHz to 40GHz(ANSI C63.4-2003) 3.1 EUT CONFIGURATION The EUT configuration for testing is installed on RF field strength measurement to meet the Commissions requirement and operating in a manner that intends to maximize its emission characteristics in a continuous normal application. 3.2 EUT EXERCISE The EUT was operated in the engineering mode to fix the Tx frequency that was for the purpose of the mea…

Text truncated - open the document above for the full version.

Report No.: HCTA1112FS06 FCC ID: A3LGTS6102B Date of Issue: Dec. 28, 2011 HCT CO., LTD. 105-1, Jangam-ri, Majang-myeon, Icheon-si,Gyeonggi-do,Korea 467-811 TEL: +82 31 645 6485 FAX: +82 31 645 6401www.hct.co.kr １ of 11 SAR Test Setup Photographs Report No.: HCTA1112FS06 FCC ID: A3LGTS6102B Date of Issue: Dec. 28, 2011 HCT CO., LTD. 105-1, Jangam-ri, Majang-myeon, Icheon-si,Gyeonggi-do,Korea 467-811 TEL: +82 31 645 6485 FAX: +82 31 645 6401www.hct.co.kr ２ of 11  Test Setup Photo Report No.: HCTA1112FS06 FCC ID: A3LGTS6102B Date of Issue: Dec. 28, 2011 HCT CO.,…

Text truncated - open the document above for the full version.