A3LHTX810DVD Receiver

Press the POWER button on the rear of the subwoofer to turn it on. If the main unit is turned onThe subwoofer will be automatically connected to the product and the Link LED on its front will blink blue for a few seconds.If the main unit is turned offThe Link LED on the front of the subwoofer will blink blue for about 30 seconds, then will change to red as the sub switches to STANDBY mode. If the subwoofer is turned off, you will see S/W CHECK on the display panel of the main unit. Place the wireless subwoofer under the main unit.If you use a device such as a microwave oven, wireless LAN Card, Bluetooth equipment, or any other device that uses the same frequency (2.4GHz) near the system, some sound interruption may be heard due to interference.The transmission distance of radio wave is about 32 feet, 9.7 inches, but may vary depending on your operating environment. If a steel-concrete wall or metallic wall is between the main unit and the wireless subwoofer, the system may not operate at all, because the radio wave cannot penetrate metal.If the main unit doesn't make wireless connection, the system needs ID Setting between the main unit and wireless subwoofer. With the main unit turned off, press the remote control's "0" J "1" J "3" J "5" number buttons and the unit will turn on. With the wireless subwoofer turned on, press ID SET button on the back of the unit for 5 seconds. •• M  quick start guide 1 disc playback Load a disc vertically into the Disc Insert Hole. Place a disc gently into the tray with the disc’s label facing up. Close the compartment by pressing the PLAY ( ) button. Playback starts automatically. 1. • 2. • Thank you for purchasing this Samsung 2.1CH Digital Home Theater System. We have manufactured this product to provide you with many hours of Audio/Video Entertainment. This “QUICK START GUIDE” guide has been included to getyou up and running in the least amount of time as possible.If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. Samsung Electronics America, Inc. 1-800-SAMSUNG (7267864) www.samsung.com/us 1 disc playback2 remote control functions3 connecting the wireless subwoofer4 connecting the video out to your tv5 connecting audio from external components6 listening to radio 1 - English 2 remote control functions 18 PORT buttonUSB port selection 19 TV/VIDEO buttonPress TV/VIDEO button to select the Videoinput on your TV. 20 EJECT button 21 CANCEL buttonUsed to cancel a wrong entry. 22 PAUSE buttonPress to pause. 23 PLAY button Press to play. STOP button Press to stop. SEARCH buttons Fast backward or forward through a song/scene. 24 TUNING/CH buttonPress to select the channel or to tune inradio broadcasting. 25 MUTE buttonPress to mute the sound. 26 RETURN buttonPress to return to the previous menu. 27 Cursor/ENTER buttonUsed to select or move up/down, left/right when setting the menu function. 28 SUBTITLE buttonSelects the disc subtitle language. 29 EXIT buttonPress to exit the setup screen. 30 INFO buttonView or change disc playback informationon screen. 31 REPEAT buttonRepeat playback of a chapter, title, group or track. 32 SOUND EDIT buttonAdjust the speaker sound settings andlevel. 33 ZOOM buttonEnlarges the picture during disc playback. 34 DIMMER buttonThe front display brightness will beadjusted. 35 S.VOL(Smart Volume) buttonMakes the sound more stable 1 DVD RECEIVER buttonYou can operate your DVD receiver with the remote control. 2 TV button You can operate your Samsung TV with the remote control. 3 POWER buttonPress to turn the Home Theater or your Samsung TV On/Off. 4 Number (0~9) buttons 5 REMAIN buttonYou can check the elapsed or remaining time on a disc. 6 STEP buttonThe picture moves forward one frame each time the button is pressed during playback. 7 Tuning Preset/CD Skip buttonsTune in radio broadcasting, skip thesong/scene. 8 VOLUME buttonPress + to raise the volume and – to lower it. 9 MENU buttonPress to see the menu. 10 AUDIO buttonSelects the Disc’s Audio language. 11 TUNER MEMORY, SD/HD buttonPress to memorize radio frequencies.Press to select SD or HD(Standard or High Defi nition ) mode. 12 LOGO buttonYou can make your own TV wallpaper (screen saver). 13 V-SOUND(Virtual Sound) buttonMakes virtual surround sound with just 2.1 channels. 14 P.BASS/AUDIO UPCALING button• Makes your MP3 sound better• Provides more powerful bass 15 SLEEP buttonPress to set the sleep off time. 16 SLOW buttonSelects three different slow motionplayback speeds.MO/ST buttonYou can listen to radio broadcasts inMONO or STEREO. 17 DVD button Press to select the DVD mode. TUNER button Press to listen to radio broadcasting. AUX button Press to select external audio input. 2 - English 3 connecting the wireless subwoofer 3 - English 353433313029282726252423222120191817 16151413121110 987654321 2.1CH Digital Home Theater System HT-X810 32 The wireless receiving antenna is built into the wireless subwoofer. Keep the unit away from water and moisture. For optimal listening performance, make sure that the area around the wireless subwoofer location is clear of any obstructions.  ID SET button POWER button HT-X810_QG_0303.indd 1-3 1//7,/2,/2 6906907 OPTICAL : Connecting an External Digital ComponentDigital signal components such as a Cable Box/Satellite receiver (Set-Top Box). Connect the Digital Input (OPTICAL) on the Home Theater to the Digital Output of the external digital component. Press the AUX button on the remote control to select DIGITAL IN. You can also use the FUNCTION button on the main unit. The mode switches as follows : DVD/CD
D.IN
AUX 1
AUX 2
USB
BT AUDIO
FM . 1.2. • 4 connecting the video out to your tv METHOD 1 : HDMI (BEST QUALITY) Connect the HDMI cable (not supplied) from the HDMI OUT jack on the back of the DVD Player to the HDMI IN jack on your TV. METHOD 2 : Component Video (BETTER QUALITY) If your television is equipped with Component Video inputs, connect a Component …

Text truncated - open the document above for the full version.

19 ENG ● CONNECTIONS CONNECTING THE VIDEO OUT TO YOUR TV Choose one of the three methods for connecting to a TV. HDMI OUT HDMI OUT METHOD3 (supplied) METHOD2METHOD1 METHOD 1 : HDMI (BEST QUALITY) Connect the HDMI cable (not supplied) from the HDMI OUT jack on the back of the DVD Player to the HDMI IN jack on your TV. METHOD 2 : Component Video (BETTER QUALITY) If your television is equipped with Component Video inputs, connect a Component video cable(not supplied) from the Component Video Output (Pr, Pb and Y) jacks on the back of the DVD Player to the Component Video Input jacks on your TV. METHOD 3 : Composite Video (GOOD QUALITY) Connect the supplied Video cable from the VIDEO OUT jack on the back of the DVD Player to the VIDEO IN jack on your TV. This product operates in Interlace scan mode (480i) for Component output. If you use an HDMI cable to connect a Samsung TV to the DVD Player, you can operate the Home Theater using the TV's remote control. This is only available with SAMSUNG TVs that support Anynet+(HDMI-CEC). Please check the logo (If your TV has anlogo, then it supports the Anynet+ function.) M    *6:A:##AKPFF 20 connections CONNECTING THE VIDEO OUT TO YOUR TV (CON'T) HDMI Auto Detection Function The player's video output will automatically change to HDMI mode when connecting an HDMI cable while power is on. HDMI (High Definition Multimedia Interface) HDMI is an interface that enables the digital transmission of video and audio data with just a single connector. Using HDMI, the DVD Home Theater transmits a digital video and audio signal and displays a vivid picture on a TV having an HDMI input jack. HDMI connection description HDMI connector - Supports video and digital audio data. - HDMI outputs only a pure digital signal to the TV. - If your TV does not support HDCP (High-bandwidth Digital Content Protection), random noise appears on the screen. Why does Samsung use HDMI? Analog TVs require an analog video/audio signal. However, when playing a DVD, the data transmitted to a TV is digital. Therefore either a digital-to-analog converter (in the DVD Home Theater) or an analog-to-digital converter (in the TV) is required. During this conversion, the picture quality is degraded due to noise and signal loss. HDMI technology is superior because it requires no D/A conversion and is a pure digital signal from the player to your TV. What is the HDCP? HDCP (High-band width Digital Content Protection) is a system for protecting DVD content outputted via HDMI from being copied. It provides a secure digital link between a video source (PC, DVD. etc) and a display device (TV, projector. etc). Content is encrypted at the source device to prevent unauthorized copies from being made. What is Anynet+? Anynet+ is a convenient function that offers linked operation of this unit through Samsung TVs with the Anynet+ feature. - If your Samsung TV has an logo, then it supports the Anynet+ function. - If you turn on the player and insert a disc, the player will start playing the disc, and the TV will turn on automatically and switch to HDMI mode. - If you turn on the player and press the Play button with a disc already inserted, the TV will immediately turn on and switch to HDMI mode. • • • • • HT-X810_XAA_0303.indd 20 21 ENG ● CONNECTIONS HDMI FUNCTION Resolution Selection This function allows the user to select the screen resolution for HDMI output. In Stop mode, press and hold the SD/HD (Standard Defi nition/High Defi nition) button on the remote control. Resolutions available for the HDMI output are 480p, 720p, 1080i/1080p. SD(Standard Defi nition) resolution is 480p and HD (High Defi nition) resolution is 720p, 1080i/1080p. The default value of HDMI output is 480p. If the TV does not support the confi gured resolution, you will not be able to see the picture properly. When an HDMI cable is connected, composite and component video signals are not output. See your TV owner's manual for more information on how to select the TV's Video Input source. Using Anynet+(HDMI-CEC) Anynet+ is a function that enables you to control other Samsung Devices with your Samsung TV's remote control. Anynet + can be used by connecting this Home Theater to a SAMSUNG TV using an HDMI Cable. This is only available with SAMSUNG TVs that support Anynet+. Connect the main unit of the Home Theater to a Samsung TV with an HDMI cable. (See page 19) Set the Anynet+ function on your TV. (See the TV instruction manual for more information.) You can operate the Home Theater by using the TV remote control. (Available TV buttons : , , , , S,T and W,X buttons,~button) If you select the TV Set the Anynet+(HDMI-CEC) to On by pressing the Anynet+ button on your TV remote control. • Receiver : On : You can listen to audio through the Home Theater. • Receiver : Off : You can listen to audio through the TV. If you select the THEATER Select THEATER to connect and set the option of each item below. • View TV : If Anynet+(HDMI CEC) is set to on and you select View TV, the home theater will automatically switch to digital in mode. • Theater Menu : you can access and control the Home theater menu. • Theater Operation : The Home Theater disc playback information will be displayed. You can control the Disc operation of the Home Theater such as title, chapter and subtitle change. • Receiver : On : You can listen to audio through the Home Theater. • Receiver : Off : You can listen to audio through the TV. If you chose 'View TV' and you want to listen to TV sound through Digital In of the Home theater, you have to connect an optical cable between the TV and the Home Theater. • • M    1. 2. • M  Why use HDMI (High Defi nition Multimedia Interface)? This device transmits a DVD video signal digitally without the process of converting to analog. You will get sharper digital pictures when using an HDMI connection. MOVEENTEREXIT MOVEENTEREXIT MOVEENTER EXIT With Anynet+ You can operate …

Text truncated - open the document above for the full version.

38 playback USING THE PLAYBACK FUNCTION (CON'T) Using the Disc Menu You can use the menus for the audio language, subtitle language, profi le, etc. DVD menu contents differ from disc to disc. In Stop mode, press the MENU button. Press the Cursor S,T button or numeric buttons to move to Disc Menu and then press the ENTER button. When you select Disc Menu and it is not supported by the disc, the "This menu is not supported" message appears on the screen. Press the Cursor S,T,W,X button to select the desired item. Press the ENTER button.  Press the EXIT button to exit the setup screen. The disc menu display may be different depending on the disc. Using the Title Menu For DVDs containing multiple titles, you can view the title of each movie. Depending on the disc, the availability of this feature may vary. In Stop mode, press the MENU button. Press the Cursor S,T button to move to Title Menu. Press the ENTER button. The title menu appears.  Press the EXIT button to exit the setup screen. The Title menu display may be different depending on the disc. 1. 2. • 3. 4. M  1. 2. 3. • M  ENTERMOVE EXIT ENTERMOVE EXIT HT-X810_XAA_0303.indd 38 39 ENG ● PLAYBACK USING BLUETOOTH You can use a Bluetooth device to enjoy music with high quality stereo sound, all without wires! What is Bluetooth? Bluetooth is an new technology that enables Bluetooth-compliant devices to easily interconnect with each other using a short wireless connection. A Bluetooth device may cause a noise or malfunction, depending on usage. When a part of the body is in contact with the receiving/transmitting system of the Bluetooth device or the Home Theater System. Electrical variation from electrical jamming by the wall, corner or office partitioning. Electrical interference from the same frequency-band devices including medical equipment, microwave oven and wireless LAN. Pair the Home Cinema System with the Bluetooth device while maintaining a close distance. The further the distance is between Home Theater System and Bluetooth device, the worse the quality is. If the distance exceeds the Bluetooth operational range, the connection is lost. The Home Theater System only supports Middle Quality SBC data(up to 237kbps@48kHz), and does not support High Quality SBC data([email protected]). In poor reception-sensitivity areas, the Bluetooth connection may not work properly. The Home Theater System has an effective reception range of up to 33 feet in all directions if there are no obstacles. The connection will be automatically cut off if the distance is out of this range. Even within this range, the sound quality may be deteriorated by obstacles such as walls or doors. To connect the Home Theater System to a bluetooth device Check if the Bluetooth device supports the Bluetooth-compliant stereo headset function. Press the FUNCTION button on the front panel of the home theater system repeatedly until the "BT AUDIO" appears. The mode switches as follows : DVD/CD ➞ D. IN➞AUX 1➞AUX 2➞USB ➞BT AUDIO➞ TUNER You will see “WAIT” for 2 seconds and then “READY” on the front display of th me Theater System. Select the Bluetooth menu on Bluetooth device you want to connect. (refer to bluetooth device's user manual) Select a Stereo headset menu in a Bluetooth device. You will see a list of scanned devices. Select "Samsung Home Theater" from the searched list. When the Home Theater System is connected to the Bluetooth device, the Home Theater System will display "Connect" on the front display, followed by the device name of the connected Bluetooth device. The Home Theater System connection is complete. Play music on the connected device. You can listen to the music playing on the connected Bluetooth device over the home theater system. You are not required to enter a PIN code (password) when connecting the Bluetooth device to the home theater system. • • • • • • • • • 1. • • 2. 3. • 4. • • 5. • M  Connect Bluetooth Device *6:A:##AKPFF 40 playback You can disconnect the Home Theater System from the Bluetooth device. (refer to bluetooth device's user manual) The Home Theater System will be disconnected. When the Home Theater System is disconnected from the Bluetooth device, the Home Theater System will display "DISCONNECT" on the front display. Press the FUNCTION button on the front panel of the home theater system to switch from “BT AUDIO” to another mode. The bluetooth device connected will wait a certain time for response from the home theater system before terminating the connection. (Time to disconnection may differ, depending on the bluetooth device) The currently connected device will be disconnected. In Bluetooth connection mode, the Bluetooth connection will be lost if the distance between the Home Theater System and the Bluetooth device exceeds 33 feet. If the distance is returned to the effective range or you restart the Bluetooth device, the Bluetooth connection can be restored. With some bluetooth devices, some functions may not work properly. • • • • M   To disconnect the Bluetooth device from the Home Theater System To disconnect the Home Theater System from the Bluetooth device USING THE BLUETOOTH (CON'T) HT-X810_XAA_0303.indd 40 41 ENG ● PLAYBACK PLAYING MEDIA FILES USING THE USB HOST FEATURE You can enjoy media fi les such as pictures, movies and music saved on an MP3 player, USB memory stick or digital camera in high quality video by connecting the storage device to the USB port of the Home Theater. Connect the USB device to the USB port on the side of the unit. Press the FUNCTION button on the DVD Player or the PORT button on the remote control to select the USB mode. USB appears on the display screen and then disappears. The USB MENU screen appears on the TV screen and the saved fi le is played. To stop playback, press the STOP () button. Safe USB Removal To prevent damage to the memory stored in the USB device, perform safe removal before disconne…

Text truncated - open the document above for the full version.

Date: Mar. 4, 2008 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 c.c. Compliance Certification Services Certification Division 47173 Benicia Street Fremont, CA 94538, USA To whom it may concern: I, the undersigned, hereby authorize Lab Manager Jim. Kim and of SGS Testing Korea Co., Ltd and hereafter referred to as SGS Testing Korea, to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by Lab Manager Jim. Kim of SGS Testing Korea Co., Ltd on our behalf shall have the same effect as acts of our own. I, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). In authorizing SGS Testing Korea as our agent, we still recognize that we are responsible to: a) comply with the relevant provisions of the certification program; b) make all necessary arrangements for the conduct of the evaluation, including provision for examining documentation and access to all areas, records (including internal audit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment, surveillance, reassessment) and resolution of complaints; c) make claims regarding certification only in respect of the scope for which certification has been granted; d) do not use our product certification in such a manner as to bring the Certification Division into disrepute and not make any statement regarding our product certification which the Certification Division may consider misleading or unauthorized; e) upon suspension or cancellation of certification, discontinue use of all advertising matter that contains any reference thereto and return any certification documents as required by the Certification Division; f) use certification only to indicate the products are certified as being in conformity with specified standards; g) endeavor to ensure that no certificate or report nor any part thereof is used in a misleading manner; h) ensure that any reference to our product certification in communication media such as documents, brochures or advertising, complies with the requirements of the Certification Division; i) keep a record of all complaints made known to the us relating to the product’s compliance with requirements of the relevant standard and to make these records available to the Certification Division when requested; j) take appropriate action with respect to such complaints and any deficiencies found in products or services that affect compliance with the requirements for certification; k) document the actions taken. This authorization is valid until further written notice from the applicant. Sincerely Yours, Steve Kim / General Manager Samsung Electronics Co., Ltd. REMARK: 1. This authorization letter will be sent along with your application when filing with the Certification Division. 2. Please follow the format and type it on company letterhead and send original to us. 3. Authorized signature must be in agreement with grantee code contact in FCC database.

If you have not received all pages, please call the direct phone number. FAX : 031-428-5859 TEL : 031-428-5886 Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Gentlemen: This letter is to comply with Section 0.457(d)(2)(i) and 0.459 pertaining to confidential material. We, Samsung Electronics , would like the following documents regarding this submission for FCC ID: A3LHTX810 to be kept confidential. 1. Schematics and block diagram 2. Parts List 3. Operating description The above material contains trade secrets or technical data, which would customarily be guarded from competitors. We do not want these documents to be accessible to the general public. Sincerely, Steve. Kim / General Manager Samsung Electronics Co., Ltd.

FCC ID : A3LHTX810 Report File No. : F690501/RF-RTL001767 Page : 71 of 81 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. SGS Testing Korea Co., Ltd. Tel. +82 31 428 5700 / Fax. +82 31 427 2371 www.electrolab.kr.sgs.com Appendix B. Photos of the EUT Front View of EUT Rear View of EUT

HT-X810 LABEL CAUTION 90.5 mm X 34.5 mm FCC ID: A3LHTX810 MODEL NO.: HT-X810

FCC ID : A3LHTX810 Report File No. : F690501/RF-RTL001767 Page : 72 of 81 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. SGS Testing Korea Co., Ltd. Tel. +82 31 428 5700 / Fax. +82 31 427 2371 www.electrolab.kr.sgs.com Inside View of EUT Front of Main Board View of EUT FCC ID : A3LHTX810 Report File No. : F690501/RF-RTL001767 Page : 73 of 81 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. SGS Testing Korea Co., Ltd. Tel. +82 31 428 5700 / Fax. +82 31 427 2371 www.electrolab.kr.sgs.com Rear of Main Board View of EUT Front of AMP Board View of EUT FCC ID : A3LHTX810 Report File No. : F690501/RF-RTL001767 Page : 74 of 81 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. SGS Testing Korea Co., Ltd. Tel. +82 31 428 5700 / Fax. +82 31 427 2371 www.electrolab.kr.sgs.com Rear of AMP Board View of EUT Front of Display Board View of EUT FCC ID : A3LHTX810 Report File No. : F690501/RF-RTL001767 Page : 75 of 81 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. SGS Testing Korea Co., Ltd. Tel. +82 31 428 5700 / Fax. +82 31 427 2371 www.electrolab.kr.sgs.com Rear of Display Board View of EUT DVD-ROM View of EUT FCC ID : A3LHTX810 Report File No. : F690501/RF-RTL001767 Page : 76 of 81 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. SGS Testing Korea Co., Ltd. Tel. +82 31 428 5700 / Fax. +82 31 427 2371 www.electrolab.kr.sgs.com FM-RDS View of EUT Front of IO Board View of EUT FCC ID : A3LHTX810 Report File No. : F690501/RF-RTL001767 Page : 77 of 81 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. SGS Testing Korea Co., Ltd. Tel. +82 31 428 5700 / Fax. +82 31 427 2371 www.electrolab.kr.sgs.com Rear of IO Board View of EUT Front of Power Board View of EUT FCC ID : A3LHTX810 Report File No. : F690501/RF-RTL001767 Page : 78 of 81 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. SGS Testing Korea Co., Ltd. Tel. +82 31 428 5700 / Fax. +82 31 427 2371 www.electrolab.kr.sgs.com Rear of Power Board View of EUT Front of RF Module Board View of EUT FCC ID : A3LHTX810 Report File No. : F690501/RF-RTL001767 Page : 79 of 81 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. SGS Testing Korea Co., Ltd. Tel. +82 31 428 5700 / Fax. +82 31 427 2371 www.electrolab.kr.sgs.com Front of RF Module Board View of EUT (Remove Shield Cap) Rear of RF Module View of EUT FCC ID : A3LHTX810 Report File No. : F690501/RF-RTL001767 Page : 80 of 81 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. SGS Testing Korea Co., Ltd. Tel. +82 31 428 5700 / Fax. +82 31 427 2371 www.electrolab.kr.sgs.com Rear of RF Module View of EUT (Remove Shield Cap) Front of BT Board View of EUT FCC ID : A3LHTX810 Report File No. : F690501/RF-RTL001767 Page : 81 of 81 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. SGS Testing Korea Co., Ltd. Tel. +82 31 428 5700 / Fax. +82 31 427 2371 www.electrolab.kr.sgs.com Rear of BT Board View of EUT

FCC ID : A3LHTX810 Report File No. : F690501/RF-RTL001768 Page : 42 of 56 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. SGS Testing Korea Co., Ltd. 18-34, Sanbon-dong, Gunpo-si, Gyeonggi-do, Korea, 435-040 Tel. +82 31 428 5700 / Fax. +82 31 427 2371 www.electrolab.kr.sgs.com 10. RF Exposure Evaluation According to FCC 1.1310 : The criteria listed in the following table shall be used to evaluate the environment impact of human exposure to radio frequency (RF) radiation as specified in § 1.1307(b) LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) 10.1 Friis transmission formula : Pd = (Pout*G)/(4*pi*R 2 ) Where Pd = power density in mW/cm 2 Pout = output power to antenna in mW G = gain of antenna in linear scale Pi = 3.1416 R = distance between observation point and center of the radiator in cm Pd the limit of MPE, 1 mW/cm 2 . If we know the maximum gain of the antenna and the total power input to the antenna, through the calculation, we will know the distance where the MPE limit is reached. Frequency Range (MHz) Electric Field Strength(V/m) Magnetic Field Strength (A/m) Power Density (mW/cm 2 ) Average Time (A) Limits for Occupational /Control Exposures 300 – 1500 -- -- F/300 6 1500 - 100000 -- -- 5 6 (B) Limits for General Population/Uncontrol Exposures 300 – 1500 -- -- F/1500 6 1500 - 100000 -- -- 1 30 FCC ID : A3LHTX810 Report File No. : F690501/RF-RTL001768 Page : 43 of 56 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. SGS Testing Korea Co., Ltd. 18-34, Sanbon-dong, Gunpo-si, Gyeonggi-do, Korea, 435-040 Tel. +82 31 428 5700 / Fax. +82 31 427 2371 www.electrolab.kr.sgs.com 10.1 Test Result of RF Exposure Evaluation Test Item RF Exposure Evaluation Data Test Mode Normal Operation 10.1.1 Output Power into Antenna & RF Exposure Evaluation Distance Operating Mode: DSSS Channel Channel Frequency (MHz) Output Peak Power to Antenna (dBm) Antenna Gain (dBi) Power Density at 20 cm (mW/cm 2 ) Limits (mW/cm 2 ) Low 5745 13.19 0.97 0.00519 1 Middle 5785 11.74 0.97 0.00371 1 High 5805 11.10 0.97 0.00321 1

FCC ID : A3LHTX810 Report File No. : F690501/RF-RTL001768 Page : 1 of 56 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. SGS Testing Korea Co., Ltd. 18-34, Sanbon-dong, Gunpo-si, Gyeonggi-do, Korea, 435-040 Tel. +82 31 428 5700 / Fax. +82 31 427 2371 www.electrolab.kr.sgs.com TEST REPORT of FCC Part 15 Subpart B&C §15.247/RSS-210 Issue 7, RSS-Gen Issue 2 FCC ID/IC Certification: A3LHTX810 / 649E-HTX810 Equipment Under Test :DVD Receiver Model Name :HT-X810 Serial No. :N/A Applicant :SAMSUNG ELECTRONICS CO.,LTD. Manufacturer : SAMSUNG ELECTRONICS HUIZHOU CO.,LTD. Date of Test(s) :2008-01-08 ~ 2008-03-14 Date of Issue :2008-03-19 In the configuration tested, the EUT complied with the …

Text truncated - open the document above for the full version.