A3LHWT450Sound Bar

HW-T450 USER MANUAL ENG - ii SAFETY INFORMATION •The following also applies to the Wireless Subwoofer (PS-WT45T). SAFETY WARNINGS TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK). NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. Refer to the table below for an explanation of symbols which may be on your Samsung product. CAUTION RISK OF ELECTRIC SHOCK. DO NOT OPEN. This symbol indicates that high voltage is present inside. It is dangerous to make any kind of contact with any internal part of this product. This symbol indicates that this product comes with important literature concerning operation and maintenance. Class II product : This symbol indicates that a safety connection to electrical earth (ground) is not required. If this symbol is not present on a product with a power cord, the product MUST have a reliable connection to protective earth (ground). AC voltage : Rated voltage marked with this symbol is AC voltage. DC voltage : Rated voltage marked with this symbol is DC voltage. Caution. Consult Instructions for use : This symbol instructs the user to consult the user manual for further safety related information. WARNING •To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. •To prevent injury, this apparatus must be securely attached to the floor/wall in accordance with the installation instructions. •This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. CAUTION •Do not expose this apparatus to dripping or splashing. Do not put objects filled with liquids, such as vases, on the apparatus. •To turn this apparatus off completely, you must pull the power plug out of the wall socket. Consequently, the power plug must be easily and readily accessible at all times. FCC NOTE (for U.S.A): FCC Supplier’s Declaration of Conformity Responsible Party - U.S. Contact Information: Samsung Electronics America, Inc. 85 Challenger Road. Ridgefield Park, NJ 07660 Phone: 1-800-SAMSUNG (726-7864) FCC Compliance Statement : This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. ENG - iii FCC Caution : •Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. •This product satisfies FCC regulations when shielded cables and connectors are used to connect the unit to other equipment. To prevent electromagnetic interference with electric appliances, such as radios and televisions, use shielded cables and connectors for connections. Class B FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: •Reorienting or relocating the receiving antenna. •Increasing the separation between the equipment and receiver. •Connecting the equipment to an outlet that is on a different circuit than the radio or TV. •Consulting the dealer or an experienced radio/TV technician for help. FCC Radiation Exposure Statement : This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated so there is at least 8 inches (20 cm) between the radiator and your body. This device and its antenna(s) must not be co-located or operated in conjunction with any other antenna or transmitter. Important Safety Instructions Read these operating instructions carefully before using the unit. Follow all the safety instructions listed below. Keep these operating instructions handy for future reference. 1. Read these instructions. 2. Keep these Instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. ENG - iv 10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11. Only use attachments/accessories specified by the manufacturer. 12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 13. Unplug this apparatus during lightning storms or when unused for long periods of time. 14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such…

Text truncated - open the document above for the full version.

ENG - 9 04 CONNECTING TO YOUR TV Hear TV sound from your Soundbar through wired or wireless connections. •When the Soundbar is connected to selected Samsung TVs, the Soundbar can be controlled using the TV’s remote control. –This feature is supported by 2017 and later Samsung Smart TVs that support Bluetooth when you connect the Soundbar to the TV using an optical cable. –This function also allows you to use the TV menu to adjust the sound field and various settings as well as the volume and mute. Method 1. Connecting with a Cable When the audio in a broadcast is encoded in Dolby Digital and the “Digital Output Audio Format” on your TV is set to PCM, we recommend that you change the setting to Dolby Digital. When the setting on the TV is changed, you will experience better sound quality. (The TV menu may use different words for Dolby Digital and PCM depending on the TV manufacturer.) Connecting using an Optical Cable USB (5V 0.5A) DIGITAL AUDIO IN (OPTICAL) OPTICAL OUT Top of the Soundbar D.IN Optical Cable   Bottom of the Soundbar 1. Connect the DIGITAL AUDIO IN (OPTICAL) jack on the Soundbar to the OPTICAL OUT jack of the TV with a digital optical cable. 2. Press the (Source) button on the top panel or remote control, and then select the “D.IN” mode. ENG - 10 Method 2. Connecting Wirelessly Connecting a TV via Bluetooth When a TV is connected using Bluetooth, you can hear stereo sound without the hassle of cabling. •Only one TV can be connected at a time. SOUND MODE PAIR OR The initial connection 1. Press the PAIR button on the remote control to enter the “BT PAIRING” mode. (OR) a. Press the (Source) button on the top panel and then select “BT”. “BT” changes to “BT PAIRING” in a few seconds automatically or changes to “BT READY” if there is a connect record. b. When “BT READY” appears, press and hold the (Source) button on the top panel of the Soundbar for more than 5 seconds to display “BT PAIRING”. 2. Select Bluetooth mode on the TV. (For more information, see the TV’s manual.) 3. Select “[AV] Samsung Soundbar T4-Series” from the list on TV’s screen. An available Soundbar is indicated with “Need Pairing” or “Paired” on the TV’s Bluetooth device list. To connect the TV to the Soundbar, select the message, and then establish a connection. •When the TV is connected, [TV Name] → “BT” appears on the Soundbar’s front display. 4. You can now hear TV sound from the Soundbar. If the device fails to connect •If a previously connected Soundbar listing (e.g. “[AV] Samsung Soundbar T4-Series”) appears in the list, delete it. •Then repeat steps 1 through 3. ENG - 11 Disconnecting the Soundbar from the TV Press the (Source) button on the top panel or on the remote control and switch to any mode but “BT”. •Disconnecting takes time because the TV must receive a response from the Soundbar. (The time required may differ, depending on the TV model.) What is the difference between BT READY and BT PAIRING? •BT READY : In this mode, you can search for previously connected TVs or connect a previously connected mobile device to the Soundbar. •BT PAIRING : In this mode, you can connect a new device to the Soundbar. (Press the PAIR button on the remote control or press and hold the (Source) button on the top of the Soundbar for more than 5 seconds while the Soundbar is in “BT” mode.) NOTES •If asked for a PIN code when connecting a Bluetooth device, enter <0000>. •In Bluetooth connection mode, the Bluetooth connection will be lost if the distance between the Soundbar and the Bluetooth device exceeds 32.8 ft (10 m). •The Soundbar automatically turns off after 18 minutes in the Ready state. •The Soundbar may not perform Bluetooth search or connection correctly under the following circumstances: –If there is a strong electrical field around the Soundbar. –If several Bluetooth devices are simultaneously paired with the Soundbar. –If the Bluetooth device is turned off, not in place, or malfunctions. •Electronic devices may cause radio interference. Devices that generate electromagnetic waves must be kept away from the Soundbar main unit - e.g., microwaves, wireless LAN devices, etc. ENG - 12 05 CONNECTING AN EXTERNAL DEVICE Connect to an external device via a wired connection or Bluetooth connection to play the external device’s sound through the Soundbar. Connecting using an Optical Cable USB (5V 0.5A) DIGITAL AUDIO IN (OPTICAL) OPTICAL OUT Top of the Soundbar D.IN Optical Cable   Bottom of the Soundbar BD / DVD player / Set-top box / Game console 1. Connect DIGITAL AUDIO IN (OPTICAL) on the main unit to the OPTICAL OUT jack of the Source Device using a digital optical cable. 2. Select “D.IN” mode by pressing the (Source) button on the top panel or on the remote control. ENG - 13 06 CONNECTING A USB STORAGE DEVICE You can play music files located on USB storage devices through the Soundbar. USB USB (5V 0.5A) DIGITAL AUDIO IN (OPTICAL) POWER USB (5V 0.5A) DIGITAL AUDIO IN (OPTICAL) USB port 1. Connect the USB device to the USB port on the bottom of the product. 2. Press the (Source) button on the top panel or on the remote control, and then select “USB”. 3. “USB” appears in the display screen. 4. Play music files from the USB storage device through the Soundbar. •The Soundbar automatically turns off (Auto Power Down) if no USB device has been connected for more than 18 minutes. Software Update Samsung may offer updates for the Soundbar’s system firmware in the future. If an update is offered, you can update the firmware by connecting a USB device with the firmware update stored on it to the USB port on your Soundbar. For more information about how to download update files, go to the Samsung Electronics website at https://www.samsung.com/us/support/ downloads/. Then, select the product type or enter the model number of your Soundbar, select the Software & Apps option, and then Downloads. Note that the option names can vary. ENG - 14 07 CONNECTING A MOBILE DEVICE Connecting via Bluetooth When a mobile device is c…

Text truncated - open the document above for the full version.

Samsung Electronics Co., LTD. 129, Samsung -ro , Yeongtong-gu Suwon-City, Gyeonggi-do, 16677, Korea Declaration of Similarity Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 January 16, 2020 Dear Sir, We, Samsung Electronics Co., LTD., hereby declare that we have a product named as Sound Bar (Model number: HW-T 450 , FCC ID: A3LHWT450) was tested by KCTL Inc. Meanwhile, for our marketing purpose, we would like to list a series models (HW-T460, HW-T430, HW- T440, HW-T470, HW-T40M, HW-T47M) on reports and certificate, all the models are electrically identical, only named differently according to buyer code. No other changes are made to them. If you have any questions, please feel free to contact me at the address shown below. Sincerely, Jenni Chun/ General manager

Samsung Electronics Co., LTD. 129, Samsu ng -ro , Yeongtong-gu Suwon-City, Gyeonggi-do, 16677, Korea Date: January 16, 2020 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 c.c. UL Verification Services Certification Division 47173 Benicia Street Fremont, CA 94538, USA To whom it may concern: I, the undersigned, hereby authorize Ms. Athena Kim/Assistant manager of KCTL Inc. and hereafter referred to as KCTL to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by Ms. Athena Kim/Assistant manager of KCTL Inc. on our behalf shall have the same effect as acts of our own. I, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). In authorizing KCTL as our agent, we still recognize that we are responsible to: a) comply with the relevant provisions of the certification program; b) make all necessary arrangements for the conduct of the evaluation, including provision for examining documentation and access to all areas, records (including internal audit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment, surveillance, reassessment) and resolution of complaints; c) make claims regarding certification only in respect of the scope for which certification has been granted; d) do not use our product certification in such a manner as to bring the Certification Division into disrepute and not make any statement regarding our product certification which the Certification Division may consider misleading or unauthorized; e) upon suspension or cancellation of certification, discontinue use of all advertising matter that contains any reference thereto and return any certification documents as required by the Certification Division; f) use certification only to indicate the products are certified as being in conformity with specified standards; g) endeavor to ensure that no certificate or report nor any part thereof is used in a misleading manner; h) ensure that any reference to our product certification in communication media such as documents, brochures or advertising, complies with the requirements of the Certification Division; i) keep a record of all complaints made known to the us relating to the product’s compliance with requirements of the relevant standard and to make these records available to the Certification Division when requested; j) take appropriate action with respect to such complaints and any deficiencies found in products or services that affect compliance with the requirements for certification; k) document the actions taken. This authorization is valid until further written notice from the applicant. Sincerely Yours, Jenni Chun, General Manager Regulatory & Environmental Affairs Samsung Electronics America, Inc

Samsung Electronics Co., LTD. 129, Samsung -ro , Yeongtong-gu Suwon-City, Gyeonggi-do, 16677, Korea CONFIDENTIALITY REQUEST Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 January 16, 2020 TO WHOM IT MAY CONCERN Pursuant to Paragraphs §0.457 and 0.459 of the Commission’s Rules (47 C.F.R.) and Section §552(b)(4) of the Freedom of Information Act, Samsung Electronics Co., Ltd. requests confidentiality for the following products: FCC ID Number A3LHWT450 Product Title/Model Sound Bar / HW-T450, HW-T460, HW-T430, HW-T440, HW-T470, HW-T40M, HW-T47M The following exhibits contain trade secrets and proprietary information that could be of benefit to our competitors regarding the design of our product. This material is not customarily available to the general public and we request that it be withheld from public inspection. We request that the following information submitted be held permanent confidential treatment. Permanent Confidential Request -. Schematics -. Block Diagram -. Operational Description -. Parts list We also hereby request Short-Term Confidentiality for 180 days after the grant as outlined in Public Notice DA 04-1705. This provision will give temporary confidentiality of commercially sensitive information prior to product release. Short-Term Confidential Request -. External Photos -. Internal Photos -. Test set-up photo -. User Manual If you have any questions, please feel free to contact me at the address shown below. Sincerely, Jenni Chun/ General manager

http://www.kctl.co.kr This test report shall not be reproduced, except in full, without the written approval External photos of EUT http://www.kctl.co.kr This test report shall not be reproduced, except in full, without the written approval http://www.kctl.co.kr This test report shall not be reproduced, except in full, without the written approval

<Label design & location> -FCC/ISED

http://www.kctl.co.kr This test report shall not be reproduced, except in full, without the written approval Internal photos of EUT SRD_PCB_Antenna BT_PCB_Antenna http://www.kctl.co.kr This test report shall not be reproduced, except in full, without the written approval http://www.kctl.co.kr This test report shall not be reproduced, except in full, without the written approval BT_PCB_Antenna http://www.kctl.co.kr This test report shall not be reproduced, except in full, without the written approval SRD_PCB_Antenna http://www.kctl.co.kr This test report shall not be reproduced, except in full, without the written approval http://www.kctl.co.kr This test report shall not be reproduced, except in full, without the written approval

verify No.354832717824 KCTL Inc. 65, Sinwon-ro, Yeongtong-gu, Suwon-si, Gyeonggi-do, 16677, Korea TEL: 82-31-285-0894 FAX: 82-505-299-8311 www.kctl.co.kr Report No.: KR20-SRF0009-B Page (2) of (12) KCTL-TIR001-003/2 Report revision history Date Revision Page No 2020-01-15 Initial report - 2020-01-17 Updated 4,10,11 2020-01-22 Added factory information 4 This report shall not be reproduced except in full, without the written approval of KCTL Inc. This document may be altered or revised by KCTL Inc. personnel only, and shall be noted in the revision section of the document. Any alteration of this document not carried out by KCTL Inc. will constitute fraud and shall nullify the document. This test report is a general report that does not use the KOLAS accreditation mark and is not related to KOLAS accreditation. KCTL Inc. 65, Sinwon-ro, Yeongtong-gu, Suwon-si, Gyeonggi-do, 16677, Korea TEL: 82-31-285-0894 FAX: 82-505-299-8311 www.kctl.co.kr Report No.: KR20-SRF0009-B Page (3) of (12) This test report shall not be reproduced, except in full, without the written approval KCTL-TIR001-003/2 CONTENTS 1. General information ......................................................................................................4 2. Device information ........................................................................................................4 2.1. Accessory information ............................................................................................4 2.2. Information about derivative model .........................................................................5 2.3. Frequency/channel operations................................................................................5 3. Measurement uncertainty .............................................................................................5 4. RF Exposure .................................................................................................................6 4.1. Test results..............................................................................................................9 5. Measurement Equipment ............................................................................................ 12 KCTL Inc. 65, Sinwon-ro, Yeongtong-gu, Suwon-si, Gyeonggi-do, 16677, Korea TEL: 82-31-285-0894 FAX: 82-505-299-8311 www.kctl.co.kr Report No.: KR20-SRF0009-B Page (4) of (12) This test report shall not be reproduced, except in full, without the written approval KCTL-TIR001-003/2 1. General information Client : Samsung Electronics Co., Ltd. Address : 129, Samsung-ro, Yeongtong-gu, Suwon-si, Gyeonggi-do, 16677, Rep. of Korea Manufacturer : Samsung Electronics Co., Ltd. Address : 129, Samsung-ro, Yeongtong-gu, Suwon-si, Gyeonggi-do, 16677, Rep. of Korea Factory : TCLTechnoly Electronics (Huizhou) Co., Ltd. Zhongkai The Third Factory Address : NO.88, North Of Luen Fat Road, Tongqiao Industrial Base, Zhongkai High-techDevelopment Zone, Huizhou City, Guangdong Province, P.R.China Laboratory : KCTL Inc. Address : 65, Sinwon-ro, Yeongtong-gu, Suwon-si, Gyeonggi-do, 16677, Korea Accreditations : FCC Site Designation No: KR0040, FCC Site Registration No: 687132 VCCI Registration No. : R-20080, G-20078, C-20059, T-20056 Industry Canada Registration No. : 8035A KOLAS No.: KT231 2. Device information Equipment under test : Sound bar Model : HW-T450 Derivative model : HW-T460, HW-T430, HW-T440, HW-T470, HW-T40M, HW-T47M Frequency range : 2 402 ㎒ ~ 2 480 ㎒ : Bluetooth(BDR/EDR) Modulation technique : Bluetooth(BDR/EDR)_GFSK, π/4DQPSK, 8DPSK Number of channels : Bluetooth(BDR/EDR)_79 ch Power source : AC 120 V Antenna specification : PCB Antenna_Bluetooth(BDR/EDR) Antenna gain : 2.10 ㏈i_Bluetooth(BDR/EDR) Software version : 13 Hardware version : D Test device serial No. : N/A Operation temperature : -20 °C ~ 70 °C Notes: This EUT contains certified SRD modular transmitter - FCC ID : A3LWSM520V - IC : 649E-WSM520V 2.1. Accessory information Equipment Manufacturer Model Serial No. Power source Woofer Samsung Electronics Co.,Ltd. PS-WT45T - AC 120 V Remote Controller Samsung Electronics Co.,Ltd. AH59-02767A - DC 1.5 V KCTL Inc. 65, Sinwon-ro, Yeongtong-gu, Suwon-si, Gyeonggi-do, 16677, Korea TEL: 82-31-285-0894 FAX: 82-505-299-8311 www.kctl.co.kr Report No.: KR20-SRF0009-B Page (5) of (12) This test report shall not be reproduced, except in full, without the written approval KCTL-TIR001-003/2 2.2. Information about derivative model The difference between basic model and derivative models is: The derivative models are according to buyer code. 2.3. Frequency/channel operations This device contains the following capabilities: Bluetooth(BDR/EDR) Ch. Frequency (㎒) 00 2 402 . . . . 39 2 441 . . . . 78 2 480 Table 2.3.1. Bluetooth(BDR/EDR) mode 3. Measurement uncertainty The measurement uncertainties shown below were calculated in accordance with the requirements of ANSI C63.10-2013. All measurement uncertainty values are shown with a coverage factor of k=2 to indicated a 95 % level of confidence. The measurement data shown herein meets of exceeds the U CISPR measurement uncertainty values specified in CISPR 16-4-2 and thus, can be compared directly to specified limits to determine compliance. Parameter Expanded uncertainty (±) Conducted RF power 1.76 ㏈ KCTL Inc. 65, Sinwon-ro, Yeongtong-gu, Suwon-si, Gyeonggi-do, 16677, Korea TEL: 82-31-285-0894 FAX: 82-505-299-8311 www.kctl.co.kr Report No.: KR20-SRF0009-B Page (6) of (12) This test report shall not be reproduced, except in full, without the written approval KCTL-TIR001-003/2 4. RF Exposure FCC Regulation This document is prepared to show compliance with the RF Exposure requirements as required in §1.1310 of the FCC rules and Regulations. The limit for Maximum Permissible Exposure (MPE), specified in FCC §1.1310, is listed in Table 1-1. According to FCC §1.1310: the criteria listed in the following table shall be used to evaluate the environmental impact of human exposure to radio-freque…

Text truncated - open the document above for the full version.

verify No.893895201239 KCTL Inc. 65, Sinwon-ro, Yeongtong-gu, Suwon-si, Gyeonggi-do, 16677, Korea TEL: 82-31-285-0894 FAX: 82-505-299-8311 www.kctl.co.kr Report No.: KR20-SRF0007-B Page (2) of (56) KCTL-TIR001-003/2 Report revision history Date Revision Page No 2020-01-15 Initial report - 2020-01-17 Updated 4,5,36,38,42,44 ,46,48,49 2020-01-22 Added factory information 4 This report shall not be reproduced except in full, without the written approval of KCTL Inc. This document may be altered or revised by KCTL Inc. personnel only, and shall be noted in the revision section of the document. Any alteration of this document not carried out by KCTL Inc. will constitute fraud and shall nullify the document. This test report is a general report that does not use the KOLAS accreditation mark and is not related to KOLAS accreditation. KCTL Inc. 65, Sinwon-ro, Yeongtong-gu, Suwon-si, Gyeonggi-do, 16677, Korea TEL: 82-31-285-0894 FAX: 82-505-299-8311 www.kctl.co.kr Report No.: KR20-SRF0007-B Page (3) of (56) This test report shall not be reproduced, except in full, without the written approval KCTL-TIR001-003/2 CONTENTS 1. General information ...................................................................................................... 4 2. Device information ........................................................................................................ 4 2.1. Accessory information ............................................................................................ 4 2.2. Information about derivative model ......................................................................... 5 2.3. Frequency/channel operations ................................................................................ 5 2.4. Simultaneously transmission condition ................................................................... 5 3. Antenna requirement .................................................................................................... 6 4. Summary of tests .......................................................................................................... 7 5. Measurement uncertainty ............................................................................................. 8 6. Measurement results explanation example .................................................................. 9 7 Test results ................................................................................................................. 10 7.1. Maximum peak output power ................................................................................ 10 7.2. Carrier frequency separation ................................................................................ 12 7.3. 20dB channel bandwidth & Occupied bandwidth .................................................. 16 7.4. Number of hopping channels ................................................................................ 22 7.5. Time of occupancy(Dwell time) ............................................................................. 24 7.6. Radiated spurious emissions & band edge ........................................................... 28 7.7. Conducted Spurious Emission .............................................................................. 50 7.8. AC Conducted emission ....................................................................................... 54 8. Measurement equipment ............................................................................................ 56 KCTL Inc. 65, Sinwon-ro, Yeongtong-gu, Suwon-si, Gyeonggi-do, 16677, Korea TEL: 82-31-285-0894 FAX: 82-505-299-8311 www.kctl.co.kr Report No.: KR20-SRF0007-B Page (4) of (56) This test report shall not be reproduced, except in full, without the written approval KCTL-TIR001-003/2 1. General information Client : Samsung Electronics Co., Ltd. Address : 129, Samsung-ro, Yeongtong-gu, Suwon-si, Gyeonggi-do, 16677, Rep. of Korea Manufacturer : Samsung Electronics Co., Ltd. Address : 129, Samsung-ro, Yeongtong-gu, Suwon-si, Gyeonggi-do, 16677, Rep. of Korea Factory : TCLTechnoly Electronics (Huizhou) Co., Ltd. Zhongkai The Third Factory Address : NO.88, North Of Luen Fat Road, Tongqiao Industrial Base, Zhongkai High-techDevelopment Zone, Huizhou City, Guangdong Province, P.R.China Laboratory : KCTL Inc. Address : 65, Sinwon-ro, Yeongtong-gu, Suwon-si, Gyeonggi-do, 16677, Korea Accreditations : FCC Site Designation No: KR0040, FCC Site Registration No: 687132 VCCI Registration No. : R-20080, G-20078, C-20059, T-20056 Industry Canada Registration No. : 8035A KOLAS No.: KT231 2. Device information Equipment under test : Sound bar Model : HW-T450 Derivative model : HW-T460, HW-T430, HW-T440, HW-T470, HW-T40M, HW-T47M Frequency range : 2 402 ㎒ ~ 2 480 ㎒ : Bluetooth(BDR/EDR) Modulation technique : Bluetooth(BDR/EDR)_GFSK, π/4DQPSK, 8DPSK Number of channels : Bluetooth(BDR/EDR)_79 ch Power source : AC 120 V Antenna specification : PCB Antenna_Bluetooth(BDR/EDR) Antenna gain : 2.10 ㏈i_Bluetooth(BDR/EDR) Software version : 13 Hardware version : D Test device serial No. : N/A Operation temperature : -20 °C ~ 70 °C Notes: This EUT contains certified SRD modular transmitter - FCC ID : A3LWSM520V - IC : 649E-WSM520V 2.1. Accessory information Equipment Manufacturer Model Serial No. Power source Woofer Samsung Electronics Co.,Ltd. PS-WT45T - AC 120 V Remote Controller Samsung Electronics Co.,Ltd. AH59-02767A - DC 1.5 V K…

Text truncated - open the document above for the full version.