A3LLS19B350LCD Monitor

- English - • The slots and openings in the cabinet and in the back or bottom are provided for necessary ventilation. To ensure reliable operation of this apparatus, and to protect it from overheating, these slots and openings must never be blocked or covered. - Do not cover the slots and openings with a cloth or other materials. - Do not block the slots and openings by placing this apparatus on a bed, sofa, rug or other similar surface. - Do not place this apparatus in a confined space, such as a bookcase, or built-in cabinet, unless proper ventilation is provided. • Do not place this apparatus near or over a radiator or heat resistor, or where it is exposed to direct sunlight. • Do not place a water containing vessel(vases etc.) on this apparatus, as this can result in a risk of fire or electric shock. • Do not expose this apparatus to rain or place it near water(near a bathtub, washbowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool etc.). If this appratus accidentally gets wet, unplug it and contact an authorized dealer immediately. Make sure to pull out the power cord from the outlet before cleaning. • This appratus use batteries. In your community there might be regulations that require you to dispose of these batteries properly under environmental considerations. Please contact your local authorities for disposal or recycling information. • Do not overload wall outlets, extension cords or adaptors beyond their capacity, since this can result in fire or electric shock. • Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plug end, adaptors and the point where they exit from the appliance. • To protect this apparatus from a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the set due to lightning and power line surges. • Before connecting the AC power cord to the DC adaptor outlet, make sure the voltage designation of the DC adaptor corrsponds to the local electrical supply. • Never insert anything metallic into the open parts of this apparatus. Doing so many create a danger of electric shock. • To avoid electric shock, never touch the inside of this apparatus. Only a qualified technician should open this apparatus. • Make sure to plug the power cord in until it is firmly inserted. When removing the power cord, make sure to hold the power plug when pulling the plug from the outlet. Do not touch the power cord with wet hands. • If this appratus does not operate normally - in particular, if there are any unusual sounds or smells coming from it - unplug it immediately and contact an authorized dealer or service center. • Be sure to pull the power plug out of the outlet if the TV is to remain unused or if you are to leave the house for an extended period of time (especially when children, elderly or disabled people will be left alone in the house). - Accumulated dust can cause an electric shock, an electric leakage or a fire by causing the power cord to generate sparks and heat or the insulation to deteriorate. • Be sure to contact an authorized service center, when installing your set in a location with heavy dust, high or low temperatures, high humidity, chemical substances and where it operates for 24 hours such as the airport, the train station etc. Failure to do so may cause serious damage to your set. • Use only a properly grounded plug and receptacle. - An improper ground may cause electric shock or equipment damage. (Class l Equipment only.) • To disconnect the apparatus from the mains, the plug must be pulled out from the mains socket, therefore the mains plug shall be readily operable. • Do not allow children to hang onto the product. • Store the accessories (battery, etc.) in a location safely out of the reach of children. • Do not install the product in an unstable location such as a shaky self, a slanted floor or a location exposed to vibration. • Do not drop or impart any shock to the product. If the product is damaged, disconnect the power cord and contact a service center. • Unplug the power cord from the power outlet and wipe the product using a soft, dry cloth. Do not use any chemicals such as wax, benzene, alcohol, thinners, insecticide, air freshener, lubricant or detergent. This may damage the appearance or erase the printing on the product. • Apparatus shall not be exposed to dripping or splashing. • Do not dispose of batteries in a fire. • Do not short circuit, disassemble or overheat the batteries. • Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. • WARNING - TO PREVENT THE SPREAD OF FIRE, KEEP CANDLES OR OTHER OPEN FLAMES AWAY FROM THIS PRODUCT AT ALL TIMES. Warning! Important Safety Instructions (Please read the appropriate section that corresponds to the marking on your Samsung product before attempting to install the product.) CAUTION CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). THERE ARE NO USER SERVICEABLE PARTS INSIDE. REFER ALL SERVICING TO QUALIFIED PERSONNEL. RISK OF ELECTRIC SHOCK DO NOT OPEN This symbol indicates that high voltage is present inside. It is dangerous to make any kind of contact with any internal part of this product. This symbol alerts you that important literature concerning operation and maintenance has been included with this product. - Français - • Les fentes et les ouvertures ménagées dans le boîtier ainsi qu'à l’arrière et au-dessous de l'appareil assurent la ventilation de ce dernier. Afin de garantir le bon fonctionnement de l'appareil et éviter les risques de surchauffe, ces fentes et ouvertures ne doivent être ni obstruées ni couvertes. - Ne couvrez pas les fentes et les ouvertures avec un morceau de tissu ou tout autre objet. - Ne les obstruez pas non plus en pl…

Text truncated - open the document above for the full version.

E E E M M M C C C T T T E E E S S S T T T R R R E E E P P P O O O R R R T T T Project No. LBE20115644 Revision No. NONE Applicant Name of organization Samsung Electronics Co., Ltd. Address 18600 Broad wick St. Rancho Dominguez CA 90220 Date of application November 16, 2011 EUT Equipment Under Test Type of device Class B personal computers and peripherals Equipment authorization Declaration of Conformity Certification Verification Kind of product LCD MONITOR Model No. LS19B350 Variant Model No. None Manufacturer Tianjin Samsung Electronics Co., LTD. Weisi Rd. Micro-Electronic Industrial Park,Jingang Rd. Xiqing Dist, Tianjin,300385 China Applied Standards FCC Part 15, Subpart B class B ANSI C63.4-2009 Test period November 16, 2011~November 17, 2011 Issue date November 18, 2011 Test result : Complied The equipment under test has found to be compliant with the applied standards. (Refer to the attached test result for more detail.) Tested by : Songnan Yang Reviewed by : Xiao Li The test results in this report only apply to the tested sample. This report must not be reproduced, except in full, without written permission from CSQAL TSEC Wei 4 Road, Microelectronics Industrial Park, Jingang High way, Tianjin, China Tel: 86 22 23961234, Fax: 86 22 23961234-5214 Project No. : LBE20115644 LCD Monitor LS19B350 -2/26- This report must not be reproduced, except in full, without written permission from CSQAL According to Sec. 2.1077, 47 CFR of the FCC Rules. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Equipment EUT Type Class B personal computers and peripherals Kind of product LCD Monitor Trade Name Samsung Electronics Model LS19B350 Applied Rules FCC Part 15, Subpart B Class B ANSI C63.4-2009 Manufacturer Tianjin Samsung Electronics Co., LTD. Weisi Rd. Micro-Electronic Industrial Park, Jingang Rd. Xiqing Dist, Tianjin,300385 China We hereby declare that the equipment bearing the trade name and model number specified above was tested conforming to the applicable FCC Rules under the most accurate measurement standards possible, and that all the necessary steps have been taken and are in force to assure that production units of the same equipment will continue to comply with the Commission’s requirements. U.S. RESPONSIBLE PARTY Samsung Electronics America QA Lab 18600 Broad wick St. Rancho Dominguez CA 90220 CONTACT PERSON Mr. Peter Ra, Manager E-Mail : [email protected] Tel : 1-310-900-5250 Fax : 1-310-537-5500 Project No. : LBE20115644 LCD Monitor LS19B350 -3/26- This report must not be reproduced, except in full, without written permission from CSQAL Table of contents 1. Summary of test results 1.1 Emission 2. General Information 2.1 Test facility 2.2 Accreditation and listing 3. Test configuration 3.1 Test Peripherals 3.2 EUT operating mode 3.3 Details of Sampling 3.4 Used cable description 3.5 EUT Description 3.6 Description of the EUT exercising method 3.7 Measurement uncertainty 4. Result of individual tests 4.1 Conducted disturbance 4.2 Radiated disturbance Appendix – EUT photography Project No. : LBE20115644 LCD Monitor LS19B350 -4/26- This report must not be reproduced, except in full, without written permission from CSQAL 1. Summary of test results The EUT has been tested according to the following specifications: Applied Test type Applied standard Result Remarks Conducted Disturbance FCC Part 15 Subpart B ANSI C63.4-2009 Complied Meets Class B Limit Radiated Disturbance Complied Meets Class B Limit - Note : These results are deemed satisfactory evidence of compliance with ICES-003 of the Canadian Interference-Causing Equipment Regulations. 2. General Information 2.1 Test facility The following firm has submitted the information required by Section 2.948 of the FCC Rules for measuring devices subject to Certification under Parts 15 & 18. The FCC takes no responsibility regarding the capability of this firm for performing the required measurements. Accordingly, this firm should not advertise or otherwise imply FCC approval of CSQAL. CHINA SAMSUNG QUALITY ASSURANCE LABORATORY is LOCATED ON Block D, 1719, Wei 4 Road, Microelectronics Industrial Park, Jingang Highway, Tianjin China. Registration Number: 745769 E-mail Address:[email protected] Phone Number:86-22-2396-1234-5211 All testing are performed in Semi-anechoic chambers conforming to the site attenuation Characteristics defined by ANSI C63.4, CISPR 22, 16-1 and 16-2 and Shielded rooms. CSQAL is operated as testing laboratory in accordance with the requirements of ISO/IEC 17025:2005. Project No. : LBE20115644 LCD Monitor LS19B350 -5/26- This report must not be reproduced, except in full, without written permission from CSQAL 2.2 Accreditation and listing Laboratory Qualifications Remarks FCC(Federal Communications Commission) Number: 745469 Korea Communications Commission Radio Research Agency Accredited : KR0148 KCKorean Testing Laboratory KTL-002/SMT VCCI (Voluntary Control Council for Interference by Information Technology Equipment) Member No: 271 CNASChina National Accreditation Service for Conformity Assessment L5281 NVLAP(National Voluntary Laboratory Accreditation Program) CODE: 500036-0 Project No. : LBE20115644 LCD Monitor LS19B350 -6/26- This report must not be reproduced, except in full, without written permission from CSQAL 3. Test Setup configuration 3.1 Test Peripherals The peripherals which were interconnected to the EUT during the test are as follows: Item Model No. Serial No. Manufacturer Note LCD Monitor LS19B350 - Samsung EUT ADAPTER AD-3014N CN07BN4400394DSE38B8TD7UR Samsung FOR EUT PC DM-V200 ZLPZ9WAZ500828F Samsung - Printer ML-2545/XAA Z6FJBACB6000011N Samsung - USB Keyboard SK-8185 OY526K Dell - USB Mouse MOC5UO J0G00G9L Dell - 3.2 EUT operating mode(s) To achieve compliance applied stan…

Text truncated - open the document above for the full version.