A3LMDRHI304Motion Detection Sensor

47 CFR §2.903 and §2.911 (d)(5) Attestation Date: 10-17-2025 FCC ID: A3LMDRHI304 To: Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA 1. Samsung Electronics Co., Ltd. (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. 2. Samsung Electronics Co., Ltd. (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment and is not an affiliate or subsidiary of an entity identified on the Covered List. Sincerely yours, Name: Ms. Jenni Chun Job Title: Head of Regulatory & Environmental Affairs Company Name: Samsung Electronics Co., Ltd.

47 CFR §2.911 (d)(7) Agent Designation Attestation Date: 10-17-2025 FCC ID: A3LMDRHI304 Applicant (Grantee) FRN: 0027908797 To: Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Samsung Electronics Co., Ltd. (“the applicant”) as required by section 2.911(d)(7), designates the following agent, located in the United States, for purposes of acting as the applicant’s agent for service of process. The applicant acknowledges that they will maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. The applicant further acknowledges their responsibility to inform the FCC whenever the agent information changes. U. S. Agent Information: Contact Person : Ms. Jenni Chun Company Name : Samsung Electronics Co., Ltd. FCC FRN : 0027908797 Company Address : 19 Chapin Rd., Building D, Pine Brook, NJ 07058 Email : [email protected] Sincerely yours, Name: Ms. Jenni Chun Job Title: Head of Regulatory & Environmental Affairs Company Name: Samsung Electronics Co., Ltd.

Samsung Electronics Co., LTD. 129, Samsu ng -ro , Yeongtong-gu Suwon-City, Gyeonggi-do, 16677, Korea Date: October 17, 2025 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 c.c. UL Verification Services Certification Division 47173 Benicia Street Fremont, CA 94538, USA To whom it may concern: I, the undersigned, hereby authorize Ms. Jeeun Mun / Assistant Manager of EUROFINS KCTL CO., LTD. and hereafter referred to as EUROFINS KCTL CO., LTD. to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by Ms. Jeeun Mun / Assistant Manager of EUROFINS KCTL CO., LTD. on our behalf shall have the same effect as acts of our own. I, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). In authorizing EUROFINS KCTL CO., LTD. as our agent, we still recognize that we are responsible to: a) comply with the relevant provisions of the certification program; b) make all necessary arrangements for the conduct of the evaluation, including provision for examining documentation and access to all areas, records (including internal audit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment, surveillance, reassessment) and resolution of complaints; c) make claims regarding certification only in respect of the scope for which certification has been granted; d) do not use our product certification in such a manner as to bring the Certification Division into disrepute and not make any statement regarding our product certification which the Certification Division may consider misleading or unauthorized; e) upon suspension or cancellation of certification, discontinue use of all advertising matter that contains any reference thereto and return any certification documents as required by the Certifi cation Division; f) use certification only to indicate the products are certified as being in conformity with specified standards; g) endeavor to ensure that no certificate or report nor any part thereof is used in a misleading manner; h) ensure tha t any reference to our product certification in communication media such as documents, brochures or advertising, complies with the requirements of the Certification Division; i) keep a record of all complaints made known to the us relating to the product’s compliance with requirements of the relevant standard and to make these records available to the Certification Division when requested; j) take appropriate action with respect to such complaints and any deficiencies found in products or services that affect c ompliance with the requirements for certification; k) document the actions taken. This authorization is valid until further written notice from the applicant. Sincerely Yours, Jenni Chun, General Manager Regulatory & Environ mental Affairs Samsung Electronics America, Inc

Samsung Electronics Co., LTD. 129, Samsung -ro , Yeongtong-gu Suwon-City, Gyeonggi-do, 16677, Korea CONFIDENTIALITY REQUEST Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 Oct 17, 2025 TO WHOM IT MAY CONCERN Pursuant to Paragraphs §0.457 and 0.459 of the Commission’s Rules (47 C.F.R.) and Section §552(b)(4) of the Freedom of Information Act, Samsung Electronics Co., Ltd. requests confidentiality for the following products: FCC ID Number Product Title/Model A3LMDRHI304 Motion Detection Sensor / MDRHI304 The following exhibits contain trade secrets and proprietary information that could be of benefit to our competitors regarding the design of our product. This material is not customarily available to the general public and we request that it be withheld from public inspection. We request that the following information submitted be held permanent confidential treatment. Permanent Confidential Request -. Schematics -. Block Diagram -. Operational Description -. Software BOM We also hereby request Short-Term Confidentiality for 180 days after the grant as outlined in Public Notice DA 04-1705. This provision will give temporary confidentiality of commercially sensitive information prior to product release. Short-Term Confidential Request -. External Photos -. Internal Photos -. Test set-up photo -. User Manual If you have any questions, please feel free to contact me at the address shown below. Sincerely, Jenni Chun/ General manager

Applicant/Grantee Samsung Electronics Co., Ltd. FCC ID: A3LMDRHI304 Modular Transmitters Request for Modular Approval Request for Limited Modular Approval Requirements EUT Conditions Comply (Y/N) Single Modular Approval Requirements 1 The radio elements of the modular transmitter must have their own shielding. The physical crystal and tuning capacitors may be located external to the shielded radio elements. Refer to below details Y 60 GHz sensor ; The module contains a NON RF section on FR4 carrier PCB and a RF section built by the mmW RF system in Package (SiP), where the BGT60LTR11 Systen on Chip (SoC) is extended by the package with mmW TX and RX antenna In the NON RF section there are only assisting components e.g. for clock generation (crystal resonator), LDO section, Vcc filter elements and hard coded ports to select the autonomous working mode without external software. The RF section, based on the mmW “Field distribution sensor” (FDS) System in Package (SiP) BGT60LTR11AIP with TX and RX antenna in package. The naming Short Range Radar is common as well. This RF radar chip includes the state machine for process control, the entire TX and RX mmW section with on chip antennas, crystal oscillator (w.o.crystal resonator) and the baseband signal processing. The mmW Si chip is working in a shielded area. Description: Between the entire active area (the silicon die)and the on chip antennafor TX and RX, aground plane for shielding is placed.Blow this shield GND, the Si mmW chip is located. Furthermore the mentioned shield GND is connected with vertical package through vias to the GND plane on the FR4 PCB. Bothshield GND planes (the above the Si mmW Chip and the below one) are combined together viaverticalpackage throughvias and GND solderballs. Thesemeasuresgeneratesa 3D Faraday cagewith the active RF silicon in the center. The radiation of the on chip antennas keeps unaffected. We referre strongly to the drawing in fileddocument. “Autonomous BGT60LTR11AIP_Principle_Block diagram.pdf” 2 The modular transmitter must have buffered modulation/data inputs (if such inputs are provided) to ensure that the module will comply with modular approval r equirements under conditions of excessive data rates or over- modulation. All input to the modules are buffered through microprocessor inputs. Y 3 The modular transmitter must have its own power supply regulation. Internal power regulators Refer to the Block-diagram Y 4 The modular transmitter must comply with the Refer to the internal photo Y antenna and transmission system requirements. 5 The modular transmitter must be tested in a stand- alone configuration, i.e., the module must not be inside another device during testing. Unless the transmitter module will be battery powered, it must comply with the AC line conducted requirements found in Section 15.207. AC or DC power lines and data input/output lines connected to the module must not contain ferrites, unless they will be marketed with the module (see Section 15.27(a)). The length of these lines shall be the length typical of actual use or, if that length is unknown, at least 10 centimeters to insure that there is no coupling between the case of the module and supporting equipment. Any accessories, peripherals, or support equipment connected to the module during testing shall be unmodified and commercially available (see Section 15.31(i)). The EUT was tested in a standalone configuration via a SD extension cable Refer to the test setup photo Y 6 The modular transmitter must be equipped with either a permanently affixed label or must be capable of electronically displaying its FCC identification number. (A) If using a permanently affixed label, the modular transmitter must be labeled with its own FCC identification number, and, if the FCC identification number is not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display a label referring to the enclosed module. This exterior label can use wording such as the following: “Contains Transmitter Module FCC ID: XYZMODEL1” or “Contains FCC ID: XYZMODEL1.” Any similar wording that expresses the same meaning may be used. The Grantee may either provide such a label, an example of which must be included in the application for equipment authorization, or, must provide adequate instructions along with the module which explain this requirement. In the latter case, a copy of these instructions must be included in the application for equipment authorization. (B) If the modular transmitter uses an electronic display of the FCC identification number, the information must be readily accessible and visible on the modular transmitter or on the device in which it is installed. If the module is installed inside another device, then the outside of the device into which the module is installed must display a label referring to the enclosed module. This exterior label can use wording such as the following: “Contains FCC certified transmitter module(s).” Any similar wording that expresses the same meaning may be used. The user manual must include instructions on how to access the electronic display. A copy of these instructions must be included in the application for equipment authorization. Refer to the external photo Y 7 The modular transmitter must comply with any specific rules or operating requirements that ordinarily apply to a complete transmitter and the Refer to the user manual Y manufacturer must provide adequate instructions along with the module to explain any such requirements. A copy of these instructions must be included in the application for equipment authorization. 8 The modular transmitter must comply with any applicable RF exposure requirements in its final configuration. Refer to the RF exposure statement for more details. Y A modular approval may be granted for single or split modular transmitters that do not comply with all of the above requirements, e.g., shield…

Text truncated - open the document above for the full version.

Rear Front

verify No.662826767063 Eurofins KCTL Co.,Ltd. 65, Sinwon-ro, Yeongtong-gu, Suwon-si, Gyeonggi-do, 16677, Korea TEL: 82-70-4904-0 113 FAX: 82-505-299-8311 www.kctl.co.kr Report No.: KR25-SRF0219-A Page (2) of (8) KCTL-TIR001-003/7 (220705) KP25-06774 REPORT REVISION HISTORY Date Revision Page No 2025-11-18 Originally issued - 2025-11-25 Updated 8 This report shall not be reproduced except in full, without the written approval of Eurofins KCTL Co.,Ltd. This document may be altered or revised by Eurofins KCTL Co.,Ltd. personnel only, and shall be noted in the revision section of the document. Any alteration of this document not carried out by Eurofins KCTL Co.,Ltd. will constitute fraud and shall nullify the document. This test report is a general report that does not use the KOLAS accreditation mark and is not related to KS Q ISO/IEC 17025 and KOLAS accreditation. Note. The report No. KR25-SRF0219 is superseded by the report No. KR25-SRF0219-A. General remarks for test reports Statement concerning the uncertainty of the measurement systems used for the tests (may be required by the product standard or client) Internal procedure used for type testing through which traceability of the measuring uncertainty has been established: Procedure number, issue date and title: Calculations leading to the reported values are on file with the testing laboratory that conducted the testing. Statement not required by the standard or client used for type testing Eurofins KCTL Co.,Ltd. 65, Sinwon-ro, Yeongtong-gu, Suwon-si, Gyeonggi-do, 16677, Korea TEL: 82-70-4904-0 113 FAX: 82-505-299-8311 www.kctl.co.kr Report No.: KR25-SRF0219-A Page (3) of (8) KCTL-TIR001-003/7 (220705) KP25-06774 CONTENTS 1. General information ......................................................................................................4 2. Device information ........................................................................................................4 2.1. Frequency/channel operations................................................................................4 3. RF Exposure .................................................................................................................5 3.1. Test results..............................................................................................................7 Eurofins KCTL Co.,Ltd. 65, Sinwon-ro, Yeongtong-gu, Suwon-si, Gyeonggi-do, 16677, Korea TEL: 82-70-4904-0 113 FAX: 82-505-299-8311 www.kctl.co.kr Report No.: KR25-SRF0219-A Page (4) of (8) KCTL-TIR001-003/7 (220705) KP25-06774 1. General information Applicant : Samsung Electronics Co., Ltd. Address : 129, Samsung-ro, Yeongtong-gu, Suwon-si, Gyeonggi-do, 16677, Korea Manufacturer : Samsung Electronics Co., Ltd. Address : 129, Samsung-ro, Yeongtong-gu, Suwon-si, Gyeonggi-do, 16677, Korea Factory 1 : CHEMTROVINA COMPANY LIMITED Address 1 : Nhon Trach 2 - Loc Khang IZ, Hiep Phuoc Town, Nhon Trach District,, Dong Nai Province, Vietnam Factory 2 : CHEMTRONICS Co., Ltd Address 2 : 35, Hyeongjero, Namsa-myeon, Cheoin-gu, Yongin-si, Gyeonggi-do, Republic of Korea Laboratory : Eurofins KCTL Co.,Ltd. Address : 65, Sinwon-ro, Yeongtong-gu, Suwon-si, Gyeonggi-do, 16677, Korea Accreditations : FCC Site Designation No: KR0040, FCC Site Registration No: 687132 VCCI Registration No. : R-20080, G-20078, C-20059, T-20056 CAB Identifier: KR0040, ISED Number: 8035A KOLAS No.: KT231 2. Device information Equipment under test : Motion Detection Sensor Model : MDRHI304 Modulation technique : Pulsed-CW Frequency range : 61 000 ㎒ ~ 61 500 ㎒ Power source : DC 3.3 V Antenna specification : Patch type antenna in package Antenna gain : 6.0 ㏈i Software version : 7.03 Hardware version : MDRHI304 Te s t device serial No. : 03 Operation temperature : -10 °C ~ 50 °C 2. 1. Frequency/channel operations This device contains the following capabilities: Pulsed-CW Ch. Frequency (㎓) 01 61.0 ~ 61.5 Table 2.1.1. Pulsed-CW Eurofins KCTL Co.,Ltd. 65, Sinwon-ro, Yeongtong-gu, Suwon-si, Gyeonggi-do, 16677, Korea TEL: 82-70-4904-0 113 FAX: 82-505-299-8311 www.kctl.co.kr Report No.: KR25-SRF0219-A Page (5) of (8) KCTL-TIR001-003/7 (220705) KP25-06774 3. RF Exposure Regulation KDB 447498 D01 v06 FCC This document is prepared to show compliance with the RF Exposure requirements as required in §1.1310 of the FCC rules and Regulations. The limit for Maximum Permissible Exposure (MPE), specified in FCC §1.1310, is listed in Table 1-1. According to FCC §1.1310: the criteria listed in the following table shall be used to evaluate the environmental impact of human exposure to radio-frequency (RF) radiation as specified in §1.1307(b). Table 1 – Limits for Maximum Permissible Exposure (MPE) Frequency Range (㎒) Electric Field Strength [V/m] Magnetic Field Strength [A/m] Power Density [㎽/㎠] Averaging Time [minute] (A) Limits for Occupational / Controlled Exposure 0.3 ~ 3.0 614 1.63 *100 6 3.0 ~ 30 1842/f 4.89/f *900/f 2 6 30 ~ 300 61.4 0.163 1.0 6 300 ~ 1 500 / / f/300 6 1 500 ~ 15 000 / / 5 6 (B) Limits for General Population / Uncontrolled Exposure 0.3 ~ 1.34 614 1.63 *100 30 1.34 ~ 30 824/f 2.19/f *180/f 2 30 30 ~ 300 27.5 0.073 0.2 30 300 ~ 1 500 / / f/1 500 30 1 500 ~ 15 000 / / 1.0 30 f=frequency in ㎒, *= plane-wave equivalent power density Eurofins KCTL Co.,Ltd. 65, Sinwon-ro, Yeongtong-gu, Suwon-si, Gyeonggi-do, 16677, Korea TEL: 82-70-4904-0 113 FAX: 82-505-299-8311 www.kctl.co.kr Report No.: KR25-SRF0219-A Page (6) of (8) KCTL-TIR001-003/7 (220705) KP25-06774 IC RF Field strength and power density limits for devices used by the general public (uncontrolled environment) Frequency Range (㎒) Electric Field (V RMS /m rms) Magnetic Field (A RMS /m) Power Density (W/m 2 ) Reference Period (minutes) 10-20 27.46 0.072 8 2 6 20-48 58.07 / 푓푓 0.25 0.154 0 / 푓푓 0.25 8.944 / 푓푓 0.5 6 48-300 22.06 0.058 52 1.291 6 300-6 000 3.142 푓푓 0.341 7 0.008 335 푓푓 0.341 7 0.026 19 푓푓 0.683 4 6 6 000-15 000 61.4 0.163 10 6 15 000-150 000 61.4 0.163 10 616 000/푓푓 1.2 150 000-30…

Text truncated - open the document above for the full version.

열정과 도전으로미래를 창조하는Global No.1 기업 FRAME Essential Funtion (Antenna Measured Result) CHEMTRONICS 개발1팀 2025. 09. 30 1 RADAR Module Picture BGT60LTR11AIP (ANT) •Antenna Size :1.2mmx 1.07mm(Tx, Rx) •Antenna Type : Patch type Antenna in package •Antenna Spec : T/Rx Antenna Gain typ. 6dBi @±50°/Az,±70°/EL(-6dB) 2 Antenna Dimension 3 FRAME RADAR Module ANT Pattern PCB in Azimuth orientation Radar DUT patch horizontal PCB in Elevation orientation Radar DUT patch vertical 4 Antenna pattern measurement Setup for Azimuth and Elevation 5 RADAR Module Test Environment 안테나 모델명BGT60LTR11AIP 측정장소(이름/주소)인천광역시연수구 벤처로82, IoT기술지원센터송도센터 측정자(싸인, 날짜)2025.09.30 (Chemtronics 김정영 부장) 안테나 게인 측정절차(참조한 규격이 있다면 명기) Cylindrical NF Probing , (Az)±90 ° / (El)±60 ° 모듈 사진(안테나별확대사진)상단 참조 안테나type (메탈안테나, 칩안테나)AiP 안테나 사양(물리적크기, 전기적특성)상단 참조 Test Setup 사진(챔버 사진, 안테나 배치된 클로즈업된사진) 상단 참조 안테나GAIN 측정s/w 명CG20202ver1.0.7 측정 계측기 리스트 및 최신 검교정일정R&SZNA 67, 교정일2024.11.29 방사패턴(2D /3D) 포함상단 참조(3D 불가) 6 RADAR Module Test Environment Antenna modelBGT60LTR11AIP Testlab Incheon Yeonsu-guVenture Road 82, IoT Technology Support Center Songdo Center, Korea Test Engineer2025.09.30 (ChemtronicsKimJungYoung) Antenna gain measurement procedure Cylindrical NF Probing , (Az)±90 ° / (El)±60 ° Antennatype (메탈안테나, 칩안테나)AiP Test software/ versionCG20202ver1.0.7 Test equipmentR&S ZNA 67, Lastcalibration date 2024.11.29 Manufacturer Samsung Electronics Co., Ltd. 129, Samsung-ro , Yeongtong-gu, Suwon-si, Gyeonggi-do, 16677, Rep. of Korea

verify No.338543159605 Eurofins KCTL Co.,Ltd. 65, Sinwon-ro, Yeongtong-gu, Suwon-si, Gyeonggi-do, 16677, Korea TEL: 82-70-4904-0113 FAX: 82-505-299-8311 www.kctl.co.kr Report No.: KR25-SRF0218-C Page (2) of (30) KCTL-TIR001-003/7 (220705) KP25-06774 REPORT REVISION HISTORY Date Revision Page No 2025-11-18 Originally issued - 2025-11-19 Updated 9,26 2025-11-25 Updated 11,12,18,21,23 2025-11-26 Updated 12,13 This report shall not be reproduced except in full, without the written approval of Eurofins KCTL Co.,Ltd. This document may be altered or revised by Eurofins KCTL Co.,Ltd. personnel only, and shall be noted in the revision section of the document. Any alteration of this document not carried out by Eurofins KCTL Co.,Ltd. will constitute fraud and shall nullify the document. This test report is a general report that does not use the KOLAS accreditation mark and is not related to KS Q ISO/IEC 17025 and KOLAS accreditation. Note. The report No. KR25-SRF0218-B is superseded by the report No. KR25-SRF0218-C. General remarks for test reports Statement concerning the uncertainty of the measurement systems used for the tests (may be required by the product standard or client) Internal procedure used for type testing through which traceability of the measuring uncertainty has been established: Procedure number, issue date and title: Calculations leading to the reported values are on file with the testing laboratory that conducted the testing. Statement not required by the standard or client used for type testing Eurofins KCTL Co.,Ltd. 65, Sinwon-ro, Yeongtong-gu, Suwon-si, Gyeonggi-do, 16677, Korea TEL: 82-70-4904-0113 FAX: 82-505-299-8311 www.kctl.co.kr Report No.: KR25-SRF0218-C Page (3) of (30) KCTL-TIR001-003/7 (220705) KP25-06774 CONTENTS 1. General information ...................................................................................................... 4 2. Device information ........................................................................................................ 4 2.1. Frequency/channel operations ................................................................................ 4 2.2. Far field distance .................................................................................................... 5 2.3. RF power setting in TEST SW ................................................................................ 5 3. Summary of tests .......................................................................................................... 6 4. Measurement uncertainty ............................................................................................. 6 5. Test results ................................................................................................................... 7 5.1. Emission bandwidth, 99% bandwidth ..................................................................... 7 5.2. EIRP ..................................................................................................................... 10 5.3. Spurious emissions ............................................................................................... 14 5.4. Frequency stability ................................................................................................ 24 5.5. AC power line conducted emissions ..................................................................... 27 6. Measurement equipment ............................................................................................ 29 Eurofins KCTL Co.,Ltd. 65, Sinwon-ro, Yeongtong-gu, Suwon-si, Gyeonggi-do, 16677, Korea TEL: 82-70-4904-0113 FAX: 82-505-299-8311 www.kctl.co.kr Report No.: KR25-SRF0218-C Page (4) of (30) KCTL-TIR001-003/7 (220705) KP25-06774 1. General information Applicant : Samsung Electronics Co., Ltd. Address : 129, Samsung-ro, Yeongtong-gu, Suwon-si, Gyeonggi-do, 16677, Korea Manufacturer : Samsung Electronics Co., Ltd. Address : 129, Samsung-ro, Yeongtong-gu, Suwon-si, Gyeonggi-do, 16677, Korea Factory 1 : CHEMTROVINA COMPANY LIMITED Address 1 : Nhon Trach 2 - Loc Khang IZ, Hiep Phuoc Town, Nhon Trach District,, Dong Nai Province, Vietnam Factory 2 : CHEMTRONICS Co., Ltd Address 2 : 35, Hyeongjero, Namsa-myeon, Cheoin-gu, Yongin-si, Gyeonggi-do, Republic of Korea Laboratory : Eurofins KCTL Co.,Ltd. Address : 65, Sinwon-ro, Yeongtong-gu, Suwon-si, Gyeonggi-do, 16677, Korea Accreditations : FCC Site Designation No: KR0040, FCC Site Registration No: 687132 VCCI Registration No. : R-20080, G-20078, C-20059, T-20056 CAB Identifier: KR0040, ISED Number: 8035A KOLAS No.: KT231 2. Device information Equipment under test : Motion Detection Sensor Model : MDRHI304 Modulation technique : Pulsed-CW Frequency range : 61 000 ㎒ ~ 61 500 ㎒ Power source : DC 3.3 V Antenna specification : Patch type antenna in package Antenna gain : 6.0 ㏈i Software version : 7.03 Hardware version : MDRHI304 Test device serial No. : 03 Operation temperature : -10 °C ~ 50 °C 2.1. Frequency/channel operations This device contains the following capabilities: Pulsed-CW Ch. Frequency (㎓) 01 61.0 ~ 61.5 Table 2.1.1. Pulsed-CW Eurofins KCTL Co.,Ltd. 65, Sinwon-ro, Yeongtong-gu, Suwon-si, Gyeonggi-do, 16677, Korea TEL: 82-70-4904-0113 FAX: 82-505-299-8311 www.kctl.co.kr Report No.: KR25-SRF0218-C Page (5) of (30) KCTL-TIR001-003/7 (220705) KP25-06774 2.2. Far field distance Far field distance(R m ) Freq range [㎒] Speed of light Freq [㎒] wavelength(λ) [m] Largest Antenna Dimension [m] Far Field Distance [m] Measurement Distance [m] Measurement Antenna EUT 40 000 – 60 000 300 60 000 0.005 0 0.058 2 0.001 6 1.35 1.50 60 000 – 90 000 300 90 000 0.003 3 0.037 8 0.001 6 0.86 1.00 90 000 – 140 000 300 140 000 0.002 1 0.024 8 0.001 6 0.57 1.00 140 000 – 220 000 300 220 000 0.001 4 0.015 8 0.001 6 0.37 1.00 61 000 – 61 500 300 61 500 0.003 7 0.047 5 0.001 6 0.92 1.00 Note: EUT antenna dimension was provided by customer. All measurements shall be made in the far-field of the measurement antenna. The far-field boundary for mm…

Text truncated - open the document above for the full version.