A3LNX1000Digital Camera

This user manual includes detailed usage instructions for your camera. Please read this manual thoroughly. ENG User Manual 1 Copyright information PlanetFirst represents Samsung Electronics' commitment to sustainable development and social responsibility through eco-driven business and management activities. • Microsoft Windows and the Windows logo are registered trademarks of the Microsoft Corporation. • Mac is a registered trademark of the Apple Corporation. • microSD™, microSDHC™, and microSDXC™ are registered trademarks of the SD Association. • HDMI, the HDMI logo, and the term “High Definition Multimedia Interface” are trademarks or registered trademarks of HDMI Licensing LLC. • Wi-Fi ® , the Wi-Fi CERTIFIED logo, and the Wi-Fi logo are registered trademarks of the Wi-Fi Alliance. • Trademarks and trade names used in this manual are the property of their respective owners. • Camera specifications or contents of this manual may be changed without prior notice due to upgrade of camera functions. • You are not allowed to reuse or distribute any part of this manual without prior permission. • We recommend using your camera within the country where you purchase it. • Use this camera responsibly and adhere to all laws and regulations concerning its use. • For Open Source License information, refer to the “OpenSourceInfo.pdf” in the provided CD-ROM. 2 Health and safety information Prevent damage to subjects’ eyesight. Do not use the flash in close proximity (closer than 1 m/3 ft) to people or animals. If you use the flash too close to your subject’s eyes, this can cause temporary or permanent eyesight damage. Keep your camera away from small children and pets. Keep your camera and all accessories out of the reach of small children and animals. Small parts may cause choking or serious injury if swallowed. Moving parts and accessories may present physical dangers as well. Do not expose the camera to direct sunlight or high temperatures for an extended period of time. Prolonged exposure to sunlight or extreme temperatures can cause permanent damage to your camera’s internal components. Avoid covering the camera with blankets or clothes. The camera may overheat, which may distort the camera or cause a fire. Do not handle the power supply cord or go near the charger during a thunderstorm. This may result in electric shock. Always comply with the following precautions and usage tips to avoid dangerous situations and ensure peak performance of your camera. Warning—situations that could cause injury to yourself or others Do not disassemble or attempt to repair your camera. This may result in electric shock or damage to the camera. Do not use your camera near flammable or explosive gases and liquids. This may cause a fire or explosion. Do not insert flammable materials into the camera or store these materials near the camera. This may cause a fire or electric shock. Do not handle your camera with wet hands. This may result in electric shock. 3 Health and safety information If liquid or foreign objects enter your camera, immediately disconnect all power sources, such as the battery, and then contact a Samsung service center. Comply with any regulations that restrict the use of a camera in a certain area. • Avoid interference with other electronic devices. • Turn off the camera when in an aircraft. Your camera can cause interference with aircraft equipment. Follow all airline regulations and turn off your camera when directed by airline personnel. • Turn off the camera near medical equipment. Your camera can interfere with medical equipment in hospitals or health care facilities. Follow all regulations, posted warnings, and directions from medical personnel. Avoid interference with pacemakers. Maintain a minimum of 15 cm between this camera and all pacemakers to avoid potential interference, as recommended by the manufacturer and the independent research group, Wireless Technology Research. If you have any reason to suspect that your camera is interfering with a pacemaker or other medical device, turn off the camera immediately and contact the manufacturer of the pacemaker or medical device for guidance. Caution—situations that could cause damage to your camera or other equipment Remove the batteries from your camera when storing it for an extended period of time. Installed batteries may leak or corrode over time and cause serious damage to your camera. Use only authentic, manufacturer-recommended, Lithium-ion replacement batteries. Do not damage or heat the battery. Inauthentic, damaged, or heated batteries may cause a fire or personal injury. Use only Samsung-approved batteries, chargers, cables and accessories. • Using unauthorized batteries, chargers, cables or accessories can cause batteries to explode, damage your camera, or cause injury. • Samsung is not responsible for damage or injuries caused by unapproved batteries, chargers, cables or accessories. Use the battery only for its intended purpose. Misusing the battery may cause a fire or electric shock. 4 Health and safety information Do not touch the flash while it fires. The flash is very hot when fired and may burn your skin. Do not use a damaged power supply cord, plug, or loose outlet when you charge batteries. This may cause a fire or electric shock. Do not force the camera’s parts or apply pressure to the camera. This may cause your camera to malfunction. Exercise caution when you connect cables and install batteries and memory cards. If you force the connectors, improperly connect cables, or improperly install batteries and memory cards, you can damage ports, connectors, and accessories. Keep cards with magnetic strips away from the camera case. Information stored on the card may be damaged or erased. Never use a damaged battery, or memory card. This may result in electric shock or camera malfunction or cause a fire. Check that the camera is operating properly before use. The manufacturer takes no responsibility for any loss of files …

Text truncated - open the document above for the full version.

91 Playback/Editing > Searching and managing files Viewing files by category in Smart Album 1 In the thumbnail view, press [m]. 2 Select Filter → a category, and then press [o]. * Default OptionDescription Type View files by the file type such as photo or video. Date* View files by the date they were saved. Week View files by the day of the week they were saved. Location View file by the place they were saved. (Only the photos captured with a GPS module have the location information.) Viewing files as a folder Continuous and burst shots appear as a folder. Deleting a folder will delete all photos in the folder. : Single View 92 Playback/Editing > Searching and managing files Protecting files Protect your files from accidental deletion. 1 In Playback mode, press [m] → z → Protect → an option. (Single, Select, All) 2 Rotate the navigation button or press [C/F] to select a file, and then press [o]. 3 Press [f]. Deleting files Delete files in Playback mode and secure more space on your memory card. Protected files are not deleted. Deleting a single file You can select a single file and delete it. 1 In Playback mode, select a file, and then press []. • Alternatively, in Playback mode, press [m] → z → Delete → Single. 2 When the pop-up message appears, select Ye s. 93 Playback/Editing > Searching and managing files Deleting multiple files You can select multiple files and delete them. 1 In Playback mode, press [] → Multiple Delete. • Alternatively, in Playback mode, press [m] → z → Delete → Select. 2 Select files you want to delete by rotating the navigation button or pressing [C/F], and then press [o]. • Press [o] again to cancel your selection. 3 Press []. 4 When the pop-up message appears, select Ye s. Deleting all files You can delete all files on the memory card at once. 1 In Playback mode, press [m]. 2 Select z → Delete → All. 3 When the pop-up message appears, select Ye s. 94 Playback/Editing Enlarging a photo You can enlarge photos when viewing them in Playback mode. You can also use the Trim function to extract the portion of the image displayed on the screen and save it as a new file. Magnified area Magnification (the maximum magnification may differ by resolution) Full Image Trim Press [o], and then rotate the navigation button clockwise to enlarge a photo. (Rotate the navigation button counter-clockwise to reduce a photo.) ToDo this Move magnified area Press [D/I/C/F]. Crop the enlarged image Press [f]. (saved as a new file) Return to the original image Press [o]. Viewing a slide show You can view photos in a slide show, apply various effects to the slide show, and play background music. 1 In Playback mode, press [m]. 2 Select . 3 Select a slide show effect option. • Skip to step 4 to start a slide show with no effects. OptionDescription Images Set the photos you want to view as a slide show. • All: View all photos in a slide show. • Date: View photos captured on a specific date in a slide show. • Select: View selected photos in a slide show. Effect Select a transition effect. Select Off for no effects. Interval Select the amount of time each photo is displayed. Music Select a background music. 4 Select Slide Show → Play or Repeat. • Slide show begins right away. Viewing photos 95 Playback/Editing > Viewing photos Auto rotating With Auto Rotate on, the camera automatically rotates photos you have captured vertically so they fit the screen horizontally. To set auto rotate options, In Playback mode, press [m] → x → Auto Rotate → an option. Setting the thumbnail mode You can select the number of files to view in the thumbnail mode. To set thumbnail mode options, In playback mode, press [m] → x → Thumbnail mode → an option. 96 Playback/Editing You can play a video, capture an image from a video, or crop a video. PauseStop Video viewing controls ToDo this Rewind Press [C]. Scan backward in 2X, 4X, and 8X increments each time you press [C]. Pause/Play Press [o]. Fast forward Press [F]. Scan forward in 2X, 4X, and 8X increments each time you press [F]. Volume control Rotate the navigation button to the left or right. Stop Press [D]. Trimming a video during playback 1 Press [o] at the point where you want the new video to begin. 2 When paused, press []. 3 Press [o] at the point where you want the new video to end. 4 When paused, press []. 5 When the pop-up message appears, select Ye s. The cut file is saved as a separate file under a new name. Playing videos 97 Playback/Editing > Playing videos Capturing an image during playback 1 Press [o] at the point where you want to save a still image. 2 Press [I]. • The resolution of the captured image is the same as the video resolution. • The captured file is saved as a separate file under a new name. 98 Playback/Editing Perform photo editing tasks, such as resizing, rotating, eliminating red-eye effects, and adjusting brightness, contrast, or saturation. Edited photos are saved as new files under different file names. 3D photos, panoramic photos, and 3D panoramic photos cannot be edited with the Image Edit function. To set Image Edit options, In Playback mode, press [f] → an option. Options * Default IconDescription Smart Filter: Apply various filter effects to photos and create unique images. (Off*, Miniature, Soft Focus, Old Film 1, Old Film 2, Halftone Dots, Sketch, Fish Eye, Defog, Negative) The new file may be smaller than the original. Red-eye Fix: Remove red-eyes on a photo. (Off*, On) The new file may be smaller than the original. * Default IconDescription Backlight: Correct the brightness of an underexposed photo. (Off*, On) Before correctionAfter correction The new file may be smaller than the original. Resize: Resize the size of a photo. The available resolutions may differ depending on the size of the selected photo. Rotate: Rotate a photo. (Off*, Right 90 ̊, Left 90 ̊, 180 ̊, Horizontal, Vertical) You cannot rotate protected files or RAW files. Editing photos 99 Playback/Editing > Editing photos * Default IconDescription Face Retouch:…

Text truncated - open the document above for the full version.

Date: March 15, 2012 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 c.c. Compliance Certification Services Certification Division 47173 Benicia Street Fremont, CA 94538, USA To whom it may concern: I, the undersigned, hereby authorize Lab Manager Charles. Kim (or Feel. Jeong) and of SGS Korea Co., Ltd and hereafter referred to as SGS Korea, to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by Lab Manager Charles. Kim (or Feel. Jeong) of SGS Korea Co., Ltd on our behalf shall have the same effect as acts of our own. I, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). In authorizing SGS Korea as our agent, we still recognize that we are responsible to: a) comply with the relevant provisions of the certification program; b) make all necessary arrangements for the conduct of the evaluation, including provision for examining documentation and access to all areas, records (including internal audit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment, surveillance, reassessment) and resolution of complaints; c) make claims regarding certification only in respect of the scope for which certification has been granted; d) do not use our product certification in such a manner as to bring the Certification Division into disrepute and not make any statement regarding our product certification which the Certification Division may consider misleading or unauthorized; e) upon suspension or cancellation of certification, discontinue use of all advertising matter that contains any reference thereto and return any certification documents as required by the Certification Division; f) use certification only to indicate the products are certified as being in conformity with specified standards; g) endeavor to ensure that no certificate or report nor any part thereof is used in a misleading manner; h) ensure that any reference to our product certification in communication media such as documents, brochures or advertising, complies with the requirements of the Certification Division; i) keep a record of all complaints made known to the us relating to the product’s compliance with requirements of the relevant standard and to make these records available to the Certification Division when requested; j) take appropriate action with respect to such complaints and any deficiencies found in products or services that affect compliance with the requirements for certification; k) document the actions taken. This authorization is valid until further written notice from the applicant. Sincerely Yours, Sang Kyung (Peter) Ra / General Manager Samsung Electronics Co., Ltd.

Date: March 15, 2012 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road, Columbia, MD 21046 RE: Request of Confidentiality for FCC ID: A3LNX1000 To Whom It May Concern: Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules (CFR 47), and Section 552 (b) (4) of the Freedom of Information Act, Samsung Electronics Co., Ltd. hereby requests confidentiality and treatment of certain information accompanying this application. The materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. We are also hereby request Short-Term Confidentiality for 180 days after the grant as outlined in Public Notice DA 04-1705. This provision will give Samsung Electronics Co., Ltd temporary confidentiality of commercially sensitive information prior to product release. The requested Permanent and Temporary Confidential exhibits are listed as follows: CONFIDENTIAL LIST 1 Block Diagram 2 Operational Descriptions Permanent 3 Schematics 4 External Photos 5 Internal Photos 6 Test-Setup Photos Short-Term 7 User’s Manual The Applicant understands that pursuant to Rule 0.457, disclosure of this application and all accompanying documentations, where applicable, will not be made public before the date of the Grant for this application. Sincerely Yours, Sang Kyung (Peter) Ra / General Manager Samsung Electronics Co., Ltd.

Model :NX1000 External photos of EUT Model :NX1000 Front view of EUT Rear view of EUT Model :NX1000 Top view of EUT Bottom view of EUT Model :NX1000 Side view of EUT

FCC/IC Label 1. FCC/IC Label Drawing SAMSUNG ELECTRONICS CO., LTD. Model : NX1000 FCC ID : A3LNX1000 IC: 649E­NX1000 Made in China 2. FCC/IC Label Location Bottom side of EUT

Internal photos of EUT Top view of Main PCB Bottom view of Main PCB Top view of CMOS PCB Bottom view of CMOS PCB Top view of Panel PCB Bottom view of Panel PCB Top view of Sub PCB Bottom view of Sub PCB View of Antenna View of GPS FPCB WLAN Antenna

Report File No. : F690501/RF-SAR001997 Date of Issue :2012-04-17 Page :1 / 61 SAR TEST REPORT Equipment Under Test:Digital Camera Model No.:NX1000 Applicant:Samsung Electronics Co., Ltd. Address of Applicant:416, Maetan-dong, Yeongtong-gu, Suwon-city, Gyeonggi-do, Korea FCC ID:A3LNX1000 IC ID649E-NX1000 Device Category:Portable Device Exposure Category:General Population /Uncontrolled Exposure Date of Receipt:2012-04-06 Date of Test(s):2012-04-16 Date of Issue:2012-04-17 Max. SAR: 0.532 W/㎏(11b) Standards:FCC OET Bulletin 65 supplement C RSS-102 (Issue 4) IEEE 1528, 2003 ANSI/IEEE C95.1, C95.3 In the configuration tested, the EUT complied with the standards specified above. Remarks: Tested by :Fred Jeong2012-04-17 Approved by:Charles Kim2012-04-17 This report details the results of the testing carried out on one sample, the results contained in this test report do not relate to other samples of the same product. The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report. This report may only be reproduced and distributed in full. If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new system complies with all relevant standards. Any mention of SGS Testing Korea Co., Ltd. or testing done by SGS Testing Korea Co., Ltd. in connection with distribution or use of the product described in this report must be approved by SGS Testing Korea Co., Ltd. in writing. Report File No. : F690501/RF-SAR001997 Date of Issue :2012-04-17 Page :2 / 61 Contents 1. General Information 1.1 Testing Laboratory........................................................................................... 3 1.2 Details of Applicant.......................................................................................... 3 1.3 Version of Report............................................................................................. 3 1.4 Description of EUT(s)....................................................................................... 3 1.5 Test Environment............................................................................................. 3 1.6 Operation description........................................................................................ 4 1.7 Evaluation procedures....................................................................................... 4 1.8 The SAR Measurement System............................................................................ 5 1.9 System Components.......................................................................................... 7 1.10 SAR System Verification.................................................................................... 8 1.11 Tissue Simulant Fluid for the Frequency Band.......................................................... 10 1.12 Test Standards and Limits................................................................................... 11 1.13 Justification for Extended SAR Dipole Calibrations................................................... 12 2 Instruments List................................................................................. 13 3 Summary of Results ........................................................................... 14 3.1 FCC Power Measurement Procedures..................................................................... 14 3.2 RF Conducted Power....................................................................................... 14 3.3 SAR Test Configuration ................................................................................... 16 3.4 Still cameras and video cameras Test position ......................................................... 17 APPENDIX A. DASY4 SAR Report B. Uncertainty Analysis C. Calibration certificate Report File No. : F690501/RF-SAR001997 Date of Issue :2012-04-17 Page :3 / 61 1. General Information 1.1Testing Laboratory SGS Korea Co., Ltd. Wireless Div. 2FL, 18-34, Sanbon-dong, Gunpo-si, Gyeonggi-do, Korea 435-040 Telephone: +82 +31 428 5700 FAX: +82 +31 427 2371 Homepage:www.ee.sgs.com/Korea 1.2 Details of Applicant Manufacturer: Samsung Electronics Co., Ltd. Address: 416, Maetan-dong, Yeongtong-gu, Suwon-city, Gyeonggi-do, Korea Contact Person: sungjo- Hwang Phone No.: +82 +31 277 8583 E-mail: [email protected] 1.3 Version of Report Version NumberDateRevision 002012-04-17Initial issue 1.4 Description of EUT(s) EUT Type : Digital Camera Model : NX1000 Serial Number : 0067940 Mode of Operation : WLAN Body worn Accessory : None Tx Frequency Range : 2412㎒~ 2462㎒(WLAN) Max. Conducted RF Power : 16.13㏈m (WLAN) Battery Type : DC 7.4 V (Li-ion Battery) 1.5 Test Environment Ambient temperature : (22±2) ° C Tissue Simulating Liquid : (22±2) ° C Relative Humidity : (55±5) % R.H. 1.6 Operation Configuration Report File No. : F690501/RF-SAR001997 Date of Issue :2012-04-17 Page :4 / 61 The client provided a special driver and test program which can control the frequency and power of the WLAN module. Measurements were performed at the lowest, middle and highest channels of the operating band. The EUT was set to maximum power level during all tests and at the beginning of each test the battery was fully charged. The DASY4 system measures power drift during SAR testing by comparing e-field in the same location at the beginning and at the end of measurement. 1.7 EVALUATION PROCEDURES - Power Reference Measurement Procedures The Power Reference Measurement and Power Drift Measurements are for monitoring the power drift of the device under test in the batch process. The Minimum distance of probe sensors to surface determines the closest measurement point to phantom surface. The minimum distance of probe sensors to surface is 4㎜. This distance cannot be smaller than the Distance of sensor calibration points to probe tip as defined in the probe properties (for example, 2.7㎜for an ET3DV6 probe type). - The entir…

Text truncated - open the document above for the full version.

Report Number: F690501/RF-RTL005470Page: 2of49 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. SGS Korea Co., Ltd. (Gunpo Laboratory)18-34, Sanbon-dong, Gunpo-si, Gyeonggi-do, Korea, 435-040 Tel. +82 31 428 5700 / Fax. +82 31 427 2371 www.ee.sgs.com/korea INDEX Table of contents 1. General information --------------------------------------------------------------------------------------3 2. Transmitter radiated spurious emissions and conducted spurious emission --------------6 3. Receiver Radiated Spurious Emission --------------------------------------------------------------25 4. 6"Bandwidth & 99 % Occupied Bandwidth ----------------------------------------------------27 5. Maximum peak output power --------------------------------------------------------------------------39 6. Power Spectral Density ---------------------------------------------------------------------------------42 7. Antenna Requirement -----------------------------------------------------------------------------------49 Report Number: F690501/RF-RTL005470Page: 3of49 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. SGS Korea Co., Ltd. (Gunpo Laboratory)18-34, Sanbon-dong, Gunpo-si, Gyeonggi-do, Korea, 435-040 Tel. +82 31 428 5700 / Fax. +82 31 427 2371 www.ee.sgs.com/korea 1. General Information 1.1. Testing Laboratory SGS Korea Co., Ltd. (Gunpo Laboratory) Wireless Div. 3FL, 18-34, Sanbon-dong, Gunpo-si, Gyeonggi-dong, Korea www.ee.sgs.com/korea Telephone:+82 +31 428 5700 FAX:+82 +31 427 2371 1.2. Details of Applicant Applicant:SAMSUNG ELECTRONICS Co., Ltd. Address:416, Maetan-dong, Yeongtong-gu, Suwon-si, Gyeonggi-do, Korea Contact Person: Hwang, Sung-Jo Phone No.: +82 31 277 8583 1.3. Details of Factory Information Factory:TIANJIN SAMSUNG OPTO-ELECTRONICS CO., LTD. Address:No.9 ZhangHeng street, Micro-Electronic Industrial Park, JinGang Road, Tianjin, China 1.4. Description of EUT Kind of Product Digital Camera Model Name NX1000 Serial Number N/A Power Supply DC 7.4 V (Li-ion Battery) Frequency Range 2 412&~ 2 462&(11b/g/n_HT20_SISO) Modulation Technique DSSS, OFDM Number of Channels 11 Antenna Type FPCB Antenna Antenna Gain -0.16"i H/W version NX1000_PV1 S/W version 0.58 1.5. Declaration by the manufacturer -802.11n supports HT20 mode only. Report Number: F690501/RF-RTL005470Page: 4of49 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. SGS Korea Co., Ltd. (Gunpo Laboratory)18-34, Sanbon-dong, Gunpo-si, Gyeonggi-do, Korea, 435-040 Tel. +82 31 428 5700 / Fax. +82 31 427 2371 www.ee.sgs.com/korea 1.6.Test Equipment List EquipmentManufacturerModelS/NCal Due. Signal GeneratorR & S SMR40100272 Jul. 15, 2012 Signal GeneratorAgilent 8648D3847M00534Mar. 29, 2013 Spectrum AnalyzerR&SFSV30101004Jul. 06, 2012 Power SensorR&SNRP-Z81100748Aug. 22, 2012 Low Pass FilterMini-CircuitsNLP-1200+V8979400903-1 Jul. 11, 2012 High Pass FilterWainwrightWHK3.0/18G-10SS344 Jul. 07, 2012 High Pass FilterWainwrightWHNX7.5/26.5G-6SS 11Sep. 15, 2012 AttenuatorAEROFLEX / INMET18N"20dB2Apr. 02, 2013 DC Power SupplyAgilent6553AMY40000695Jul. 04, 2012 PreamplifierH.P.8447F2944A03909Jul. 04, 2012 PreamplifierR & SSCU 1810117Jan. 12, 2013 Preamplifier SCHWARZBECK MESSELEKTRONIK JS44-18004000-35-8P1546891Jul. 04, 2012 Test ReceiverR & SESU26100109Feb. 21, 2013 Bilog Antenna SCHWARZBECK MESSELEKTRONIK VULB9163396May 12, 2013 Horn AntennaR & SHF 907 100019Jul. 29, 2012 Horn AntennaSCHWARZBECKBBHA 9170 BBHA9170223Jun. 30, 2012 Antenna MasterINN-COMM 4000N.C.R. N.C.R. Turn TableINN-CODS 1200 SN.C.R. N.C.R. Anechoic Chamber SY Corporation L × W × H (9.6 m × 6.4 m × 6.6 m) N.C.R.N.C.R. Report Number: F690501/RF-RTL005470Page: 5of49 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. SGS Korea Co., Ltd. (Gunpo Laboratory)18-34, Sanbon-dong, Gunpo-si, Gyeonggi-do, Korea, 435-040 Tel. +82 31 428 5700 / Fax. +82 31 427 2371 www.ee.sgs.com/korea 1.7. Summary of Test Results Measurement of Digital Transmission Systems Operating under Section 15.247 March 23, 2005 is used. The EUT has been tested according to the following specifications: APPLIED STANDARD:FCC Part15 subpart B&C, RSS-210, RSS-Gen Standard sectionTest ItemResult 15.205(a) 15.209 15.247(d) A8.5 Transmitter Radiated Spurious Emissions Conducted Spurious Emission Complied 15.109(a)RSS-Gen 6Receiver Radiated Spurious EmissionComplied 15.247(a)(2)A8.2(a)6 dB Bandwidth and 99% BWComplied 15.247(b)(3)A8.4(4)Maximum Peak Output PowerComplied 15.247(e)A8.3(2)Power Spectral DensityComplied 1.8. Conclusion of worst-case The field strength of spurious emission was measured in three orthogonal EUT positions(X-axis, Y-axis and Z-axis). Worst case is X-axis. 1 Mbps is the highest output power in the 11b. 6 Mbps is the highest output power in the 11g. In case of 11n, we chose MCS0 mode. 1.9. Test report revision RevisionReport numberDescription 0F690501/RF-RTL005470Initial Report Number: F690501/RF-RTL005470Page: 6of49 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. SGS Korea Co., Ltd. (Gunpo Laboratory)18-34, Sanbon-dong, Gunpo-si, Gyeonggi-do, Korea, 435-040 Tel. +82 31 428 5700 / Fax. +82 31 427 2371 www.ee.sgs.com/korea 2. Transmitter Radiated Spurious Emissions and Conducted Spurious Emission 2.1. Test Setup 2.1.1. Transmitter Radiated Spurious Emissions The di…

Text truncated - open the document above for the full version.

Test Setup Photographs Front Back Left Edge Right Edge Top Bottom Front Accessory (Aperture) EUT Photo Front (Aperture) Front Back Left Edge Right Edge Top Bottom Front Battery Back Battery Front Accessory (Aperture)

Test setup photo of EUT A. Photo of Test setup for RSE