A3LSCHI939PCS CDMA/GSM/EDGE Phone with WLAN and Bluetooth

User manual SCH-I939 This device is capable of operating in 802.11a mode. For 802.11a devices operating in the frequency range of 5.15 - 5.25 GHz, they are restricted for indoor operations to reduce any potential harmful interference for Mobile Satellite Services (MSS) in the US. WIFI Access Points that are capable of allowing your device to operate in 802.11a mode (5.15 - 5.25 GHz band) are optimized for indoor use only. If your WIFI network is capable of operating in this mode, please restrict your WIFI use indoors to not violate federal regulations to protect Mobile Satellite Services. Draft 6 2011-12-23 Only for Marketing using this manual This user manual has been specially designed to guide you through the functions and features of your mobile phone. To get started quickly, refer to “introducing your mobile phone, Instructional icons Before you start, familiarise yourself with the icons you will see in this manual: Warning—situations that could cause injury to yourself or others Caution—situations that could cause damage to your phone or other equipment Note—notes, usage tips, or additional information  Refer to—pages with related information; for example:  p. 12 (represents “see page 12”) Õ Followed by—the order of options or menus you must select to perform a step; for example: In Menu mode, select Messages Õ Create new message (represents Messages, followed by Create new message) [ ] Square brackets—phone keys; for example: [](represents the Power/ Menu exit key) < > Angled brackets—softkeys that control different functions at each screen; for example: <OK> (represents the OK softkey) Copyright information Rights to all technologies and products that comprise this device are the property of their respective owners:  Bluetooth ® is a registered trademark of the Bluetooth SIG, Inc. worldwide  Java™ is a trademark of Sun Microsystems, Inc.  Windows Media Player ® is a registered trademark of Microsoft Corporation. contents safety and usage information Safety warnings Safety precautions Important usage information introducing your mobile phone Unpack .. Phone layout Keys Display Icons assembling and preparing your mobile phone Install the SIM card and battery Charge the battery using basic functions Turn your phone on and off Access menus Customise your phone Use basic call functions Send and view messages Add and find contacts troubleshooting safety and usage information Comply with the following precautions to avoid dangerous or illegal situations and ensure peak performance of your mobile phone. Safety warnings Keep your phone away from small children and pets Keep your phone and all accessories out of the reach of small children or animals. Small parts may cause choking or serious injury if swallowed. Protect your hearing Excessive exposure to sound at high volumes can cause hearing damage. Always turn the volume down before plugging the earphones into an audio source and use only the minimum volume setting necessary to hear your conversation or music. Install mobile phones and equipment with caution Ensure that any mobile phones or related equipment installed in your vehicle are securely mounted. Avoid placing your phone and accessories near or in an air bag deployment area. Improperly installed wireless equipment can cause serious injury when air bags inflate rapidly. Handle and dispose of batteries and chargers with care  Use only Samsung-approved batteries and chargers specifically designed for your phone. Incompatible batteries and chargers can cause serious injuries or damage to your phone.  Never dispose of batteries or phones in a fire. Follow all local regulations when disposing used batteries or phones.  Never place batteries or phones on or in heating devices, such as microwave ovens, stoves, or radiators. Batteries may explode when overheated.  Never crush or puncture the battery. Avoid exposing the battery to high external pressure, which can lead to an internal short circuit and overheating. Avoid interference with pacemakers Maintain a minimum of 15 cm (6 inches) between mobile phones and pacemakers to avoid potential interference, as recommended by manufacturers and the independent research group, Wireless Technology Research. If you have any reason to suspect that your phone is interfering with a pacemaker or other medical device, turn off the phone immediately and contact the manufacturer of the pacemaker or medical device for guidance. Turn off the phone in potentially explosive environments Do not use your phone at refuelling points (service stations) or near fuels or chemicals. Turn off your phone whenever directed by warning signs or instructions. Your phone could cause explosions or fire in and around fuel or chemical storage and transfer areas or blasting areas. Do not store or carry flammable liquids, gases, or explosive materials in the same compartment as the phone, its parts, or accessories. Reduce the risk of repetitive motion injuries When sending text messages or playing games on your phone, hold the phone with a relaxed grip, press the keys lightly, use special features that reduce the number of keys you have to press (such as templates and predictive text), and take frequent breaks. Safety precautions Drive safely at all times Avoid using your phone while driving and obey all regulations that restrict the use of mobile phones while driving. Use hands-free accessories to increase your safety when possible. Follow all safety warnings and regulations Comply with any regulations that restrict the use of a mobile phone in a certain area. Use only Samsung-approved accessories Using incompatible accessories may damage your phone or cause injury. Turn off the phone near medical equipment Your phone can interfere with medical equipment in hospitals or health care facilities. Follow all regulations, posted warnings, and directions from medical personnel. Turn off the phone or disable the wireless functions when in an aircraft Your phone can cause …

Text truncated - open the document above for the full version.

SAMSUNG ELECTRONICS AMERICA, INC. American QA Lab 19 Chapin Rd, Building D. Pine Brook, NJ 07058 Date: May 7, 2012 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road, Columbia, MD 21046 RE: Request of Confidentiality for FCC ID: A3LSCHI939 To Whom It May Concern: Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules (CFR 47), and Section 552 (b) (4) of the Freedom of Information Act, SAMSUNG ELECTRONICS CO.,LTD. hereby requests confidentiality and treatment of certain information accompanying this application. The materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. We are also hereby request Short-Term Confidentiality for 180 days after the grant as outlined in Public Notice DA 04-1705. This provision will give SAMSUNG ELECTRONICS CO.,LTD. temporary confidentiality of commercially sensitive information prior to product release. The requested Permanent and Short-Term Confidential exhibits are listed as follows: PERMANENT AND SHORT-TERM CONFIDENTIAL LIST Exhibit Description 1 Block Diagram PERMANENT 2 Operational Description 3 External Photos 4 Internal Photos 5 Test-Setup Photos SHORT-TERM 6 Users Manual The Applicant understands that pursuant to Rule 0.457, disclosure of this application and all accompanying documentations, where applicable, will not be made public before the date of the Grant for this application. Sincerely, Peter Ra General Manager American QA Lab SAMSUNG Electronics America INC.

SAMSUNG ELECTRONICS CO., LTD 416,Maetan-3dong,Yeongtong-gu Suwon-si,Gyeonggi-do, 443-742 Korea May 7, 2012 Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 SUBJECT : Label Statement FCC ID : A3L SCHI939 Gentlemen: We hereby provide the label statement letter for the above-mentioned device by a new label statement policy instituted at the September 12, 2006, TCB-FCC Teleconference. The label statement is as follows: The FCC ID shown in the FCC ID label page will be readily visible at the time of purchase because the device will be marketed without the battery installed. The label is permanently attached by acrylic glue and not easily removed from the device. This statement could not be included in the label. So we inform you of it through this letter. Should you have any questions or comments concerning the above, please contact the undersigned. Sincerely Yours, Seoung Ho Park Senior Manager SAMSUNG ELECTRONICS CO.,LTD Telecommunication Network Business Mobile Communication Division Regulatory Compliance Group.

Label and Location Samsung Phone Model: SCH-I939 FCC ID: A3LSCHI939 Label: Location: Top Back plate of device Bottom Label is placed inside of the battery compartment. Label

Project N Applican EUT Applied Test Per Issue da Test res The eq (Refer Tested b The test res without writt E E E No. L nt Name Date Ty E au Kin M Varia M Standards riod ate ult : Comp quipment un r to the attac by : Su-Y sults in this re ten permissio 416 Te l E E E M M M C C C LBE2012236 of organi Address of applica pe of devi Equipmen uthorizatio FCC ID nd of prod Model No ant Model anufactur s plied nder test ha ched test re Young Son eport only ap on from CS & 6, Maetan 3-do : 82 31 279 17 5 C C C T T T E E E 65 zationS 41 G ation Ap ice C nt on A3 uct M . SC l No. Re rer 41 Gy FC Ap M as found to esult for mo pply to the tes & Environmen ng, Yeongtong- 50, Fax: 82 3 -1/12- E E E S S S T T T Issue No. amsung E 16, Maetan yeonggi-d o pril 17, 2012 lass B com Declaration 3LSCHI939 obile Phone CH-I939 efer to clau 16, Maetan yeonggi-do CC Part 15, pril 25, 2012 ay 3, 2012 be complia ore detail.) Revi sted sample. nt center. -gu, Suwon-si, G 1 279 1745 R R R E E E P P P lectronics 3-dong, Ye o, 443-742, 2 puting devic n of Conform 9 e se 3.5 3-dong, Ye , 443-742, , Subpart B 2 ~ May 2, ant with the iewed by This report Gyeonggi-so, 4 P P P O O O R R R Co., Ltd. eongtong-gu Republic of ces periphe mity Cer eongtong-gu Republic of , Class B / A 2012 applied sta : Ta e - You must not be 443-742, Repub R R R T T T 1 u, Suwon-si f Korea eral rtification u, Suwon-si f Korea ANSI C63.4 ndards. ung Jang reproduced, blic of Korea , Verificatio , 4-2003 except in fu on ll, Project No. : LBE20122365 Mobile Phone : SCH-I939 - 2/12- This report must not be reproduced, except in full, without written permission from CS & Environment center. Form No.: SRA-TRF-20/0 Table of contents Summary of test results 1.1 Emission ------------------------------------------------------------------------------------------------------------------------------------ 3 General Information 2.1 Test facility -------------------------------------------------------------------------------------------------------------------------------- 3 Test Configuration 3.1 Test Peripherals --------------------------------------------------------------------------------------------------------------------- 3 3.2 EUT operating mode ------------------------------------------------------------------------------------------------------------ 4 3.3 Details of Sampling --------------------------------------------------------------------------------------------------------------- 4 3.4 Used cable description -------------------------------------------------------------------------------------------------------- 4 3.5 EUT Description --------------------------------------------------------------------------------------------------------------------- 5 3.6 Clock Frequencies ---------------------------------------------------------------------------------------------------------------- 5 3.7 Test configuration and condition -------------------------------------------------------------------------------------- 6 3.8 Measurement uncertainty --------------------------------------------------------------------------------------------------- 6 Result of individual tests 4.1 Conducted disturbance ------------------------------------------------------------------------------------------------------- 7 4.2 Radiated disturbance ---------------------------------------------------------------------------------------------------------- 9 Project No. : LBE20122365 Mobile Phone : SCH-I939 - 3/12- This report must not be reproduced, except in full, without written permission from CS & Environment center. Form No.: SRA-TRF-20/0 1. Summary of test results 1.1 Emission The EUT has been tested according to the following specifications: Applied Test type Applied standard Result Remarks Conducted Disturbance (Mains port) FCC Part 15 Subpart B / ANSI C63.4-2003 Complied Meets Class B Limit Radiated Disturbance Complied Meets Class B Limit 2. General Information 2.1 Test facility The CS & Environment center is located on Samsung Electronics Co., Ltd. at 416, Maetan 3-dong, Yeongtong-gu, Suwon-si, Gyeonggi-do, Republic of Korea. All testing are performed in Semi-anechoic chambers conforming to the site attenuation Characteristics defined by ANSI C63.4, CISPR 22, 16-1 and 16-2. and Shielded rooms. The CS & Environment center is operated as testing laboratory in accordance with the requirements of ISO/IEC 17025:2005. 3. Test Setup configuration 3.1 Test Peripherals The cables used for these peripherals are either permanently attached by the peripheral manufacturer or coupled with an assigned cable as defined below. The following is a listing of the EUT and peripherals utilized during the performance of EMC test: Description Model No. Serial No. Manufacturer/ Trademark FCC ID / DoC Mobile Phone SCH-I939 - SAMSUNG A3LSCHI939 Battery EB-L1H2LLU AAaC316YS/5-B SAMSUNG - Headset EHS64AVFWE - SAMSUNG - Data Cable ECB-DU5ABE RT1C313AS E SAMSUNG - microSD Card 2GB - SANDISK - Desk-Top Computer HP Compaq dx2200 Microtower CNG7060LW0 HP DoC LCD Monitor 9417-AC1 V2-NA737 SAMSUNG DoC Mouse N3+Optical K034729902 HP DoC Keyboard SDM8500P 8M000131 SAMSUNG DoC Gigabit Switch 8 3CGSU08 AB/9XRQAC0024825 3COM DoC Power Supply PW150 KA1203N03 AULT DoC Project No. : LBE20122365 Mobile Phone : SCH-I939 - 4/12- This report must not be reproduced, except in full, without written permission from CS & Environment center. Form No.: SRA-TRF-20/0 3.2 EUT operating mode To achieve compliance applied standard specification, the following mode(s) were made during compliance testing: Operating Mode 1 USB Mode (Data Communication) 3.3 Details of Sampling Customer selected, single unit. 3.4 Used cable description The EUT is configured, installed, arranged and operated in a manner consistent with typical applications. Interface cables/loads/devices are connected to at least one of each type of interface port of the EUT, and where practical, each cable shall be terminated in a device typical of actual usage. …

Text truncated - open the document above for the full version.

Project No. : LBE20122365 Mobile Phone : SCH-I939 - 1/4- This report must not be reproduced, except in full, without written permission from CS & Environment center. Form No.: SRA-TRF-20/0 APPENDIX – Test Setup and EUT photography – Project No. : LBE20122365 Mobile Phone : SCH-I939 - 2/4- This report must not be reproduced, except in full, without written permission from CS & Environment center. Form No.: SRA-TRF-20/0 1. Photograph of Test Setup [ Conducted Disturbance – Front ] [ Conducted Disturbance – Rear ] Project No. : LBE20122365 Mobile Phone : SCH-I939 - 3/4- This report must not be reproduced, except in full, without written permission from CS & Environment center. Form No.: SRA-TRF-20/0 [ Radiated Disturbance for Below 1 GHz – Front ] [ Radiated Disturbance for Below 1 GHz – Rear ] Project No. : LBE20122365 Mobile Phone : SCH-I939 - 4/4- This report must not be reproduced, except in full, without written permission from CS & Environment center. Form No.: SRA-TRF-20/0 [ Radiated Disturbance for Above 1 GHz – Front ] [ Radiated Disturbance for Above 1 GHz – Rear ]