A3LSCHR250ACellular/PCS CDMA Phone with Bluetooth

User’s manual for SCH-R250 Using this manual This user manual has been specially designed to guide you through the functions and features of your mobile phone. To get started quickly, refer to the sections “Introducing your mobile phone”, ”Assembling and preparing your mobile phone” and “Using basic functions”. Instructional icons Before you start, familiarise yourself with the icons you will see in this manual: Warning—situations that could cause injury to yourself or others Caution—situations that could cause damage to your phone or other equipment Note—notes, usage tips, or additional information  Refer to—pages with related information; for example:  p. 12 (represents “see page 12”) Õ Followed by—the order of options or menus you must select to perform a step; for example: In Menu mode, select Messages Õ Create new message (represents Messages, followed by Create new message) [ ] Square brackets—phone keys; for example: [] (represents the Power/ Menu exit key) < > Angled brackets—softkeys that control different functions at each screen; for example: <OK> (represents the OK softkey) Copyright information Rights to all technologies and products that comprise this device are the property of their respective owners:  Bluetooth ® is a registered trademark of the Bluetooth SIG, Inc. worldwide  Java™ is a trademark of Sun Microsystems, Inc.  Windows Media Player ® is a registered trademark of Microsoft Corporation. Contents Safety and usage information Safety warnings Safety precautions Important usage information Introducing your mobile phone Unpack Phone layout Keys Display Icons Assembling and preparing your mobile phone Install the SIM card and battery Charge the battery Using basic functions Turn your phone on and off Access menus Customize your phone Use basic call functions Send and view messages Add and find contacts Troubleshooting Safety and usage information Comply with the following precautions to avoid dangerous or illegal situations and ensure peak performance of your mobile phone. Safety warnings Keep your phone away from small children and pets Keep your phone and all accessories out of the reach of small children or animals. Small parts may cause choking or serious injury if swallowed. Protect your hearing Excessive exposure to sound at high volumes can cause hearing damage. Always turn the volume down before plugging the earphones into an audio source and use only the minimum volume setting necessary to hear your conversation or music. Install mobile phones and equipment with caution Ensure that any mobile phones or related equipments installed in your vehicle are securely mounted. Avoid placing your phone and accessories near or in an air bag deployment area. Improperly installed wireless equipment can cause serious injury when air bags inflate rapidly. Handle and dispose of batteries and chargers with care  Use only Samsung-approved batteries and chargers specifically designed for your phone. Incompatible batteries and chargers can cause serious injuries or damage to your phone.  Never dispose of batteries or phones in a fire. Follow all local regulations when disposing used batteries or phones.  Never place batteries or phones on or in heating devices, such as microwave ovens, stoves, or radiators. Batteries may explode when overheated.  Never crush or puncture the battery. Avoid exposing the battery to high external pressure, which can lead to an internal short circuit and overheating. Avoid interference with pacemakers Maintain a minimum distance of 15 cm (6 inches) between mobile phones and pacemakers to avoid potential interference, as recommended by manufacturers and the independent research group, Wireless Technology Research. If you have any reason to suspect that your phone is interfering with a pacemaker or other medical device, turn off the phone immediately and contact the manufacturer of the pacemaker or medical device for guidance. Turn off the phone in potentially explosive environments Do not use your phone at refuelling points (service stations) or near fuels or chemicals. Turn off your phone whenever directed by warning signs or instructions. Your phone could cause explosions or fire in and around fuel or chemical storage and transfer areas or blasting areas. Do not store or carry flammable liquids, gases, or explosive materials in the same compartment as the phone, its parts, or accessories. Reduce the risk of repetitive motion injuries When sending text messages or playing games on your phone, hold the phone with a relaxed grip, press the keys lightly, use special features that reduce the number of keys you have to press (such as templates and predictive text), and take frequent breaks. Safety precautions Drive safely at all times Avoid using your phone while driving and obey all regulations that restrict the use of mobile phones while driving. Use hands-free accessories to increase your safety when possible. Follow all safety warnings and regulations Comply with any regulations that restrict the use of a mobile phone in a certain area. Use only Samsung-approved accessories Using incompatible accessories may damage your phone or cause injury. Turn off the phone near medical equipments Your phone can interfere with medical equipments in hospitals or health care facilities. Follow all regulations, posted warnings, and directions from medical personnel. Turn off the phone or disable the wireless functions when in an aircraft Your phone can cause interference with aircraft equipment. Follow all airline regulations and turn off your phone or switch to a mode that disables the wireless functions when directed by airline personnel. Protect batteries and chargers from damage Avoid exposing batteries to very cold or very hot temperatures (below 0° C/32° F or above 45° C/ 113° F). Extreme temperatures can reduce the charging capacity and life of your batteries. Prevent batteries from contacting metal objects, as this can create a connection between the…

Text truncated - open the document above for the full version.

SEP 20, 2010 Federal Communications Commission Equipment Approval Services 7435 Oakland Mills Road Columbia, MD 21046 SUBJECT: SAMSUNG ELECTRONICS CO.,LTD FCC ID: A3LSCHR250A Part 20.19 Certification To Whom It May Concern: The following are the model designations and their associated key features for this FCC ID, according to requirem ent in the TCB Guidance issued on June 20, 2008. We, Samsung Electronics, hereby declare the samples evaluated in this application are equivalent to production samples. FCC ID: A3LSCHR250A Model(s): SCH-R250 Air Interfaces: CDMA,USPCS Radio Services: CDMA,USPCS Key Features: Bluetooth SMS GPS Should you have any questions or comments concerning the above, please contact the undersigned. Sincerely, authorized signature Heesung Kim

SAMSUNG ELECTRONICS AMERICA, INC. American QA Lab 18600 Broadwick St. Rancho Dominguez, CA 90220 Date: September 16, 2010 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road, http Columbia, MD 21046 RE: Request of Confidentiality for FCC ID: A3LSCHR250A To Whom It May Concern: Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules (CFR 47), and Section 552 (b) (4) of the Freedom of Information Act, SAMSUNG ELECTRONICS CO.,LTD. hereby requests confidentiality and treatment of certain information accompanying this application. The materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. We are also hereby request Short-Term Confidentiality for 180 days after the grant as outlined in Public Notice DA 04-1705. This provision will give SAMSUNG ELECTRONICS CO.,LTD. temporary confidentiality of commercially sensitive information prior to product release. The requested Permanent and Short-Term Confidential exhibits are listed as follows: PERMANENT AND SHORT-TERM CONFIDENTIAL LIST Exhibit Description 1 Block Diagram 2 Operational Description 3 Schematics PERMANENT 4 Parts List & Tune-Up Procedure 5 External Photos 6 Internal Photos 7 Test-Setup Photos SHORT-TERM 8 Users Manual The Applicant understands that pursuant to Rule 0.457, disclosure of this application and all accompanying documentations, where applicable, will not be made public before the date of the Grant for this application. Sincerely, Peter Ra General Manager American QA Lab SAMSUNG Electronics America INC.

FCC ID : A3LSCHR250A The label is placed inside the battery compartment A3LSCHR250A

FCC ID: A3LSCHR250AReport Number: FH-182-S1 Page : 1 of 30 SAMSUNG Electronics C0. LTD EUT Type: Dual-Band CDMA Phone with Bluetooth Issue Date : Aug.27, 2010 SAMSUNG ELECTRONICS Co., Ltd., Regulatory Compliance Group IT R&D Center 416, Maetan-3dong, Yeongtong-gu, Suwon-si, Gyeonggi-do, Korea 443-742 TEST REPORT ON SAR Model Tested: SCH-R250 FCC ID (Requested): A3LSCHR250A Job No: FH-182 Report No: FH-182-S1 - Abstract – This document reports on SAR Tests carried out in accordance with FCC/OET Bulletin 65, Supplement C(July 2001). Prepared By JR LEE - Test Engineer Authorized By SH ONG - Technical Manager(Deputy) FCC ID: A3LSCHR250AReport Number: FH-182-S1 Page : 2 of 30 SAMSUNG Electronics C0. LTD EUT Type: Dual-Band CDMA Phone with Bluetooth Issue Date : Aug.27, 2010 Contents 1. GENERAL INFORMATION .............................................................................. 3 2. DESCRIPTION OF DEVICE ............................................................................ 3 3. DESCRIPTION OF TEST EQUIPMENT .......................................................... 4 3.1 SAR Measurement Setup ............................................................................................................... 4 3.2 E-field Probe ................................................................................................................................... 5 3.3 Phantom.......................................................................................................................................... 7 3.4 Brain Simulating Mixture Characterization .................................................................................... 9 3.5 Device Holder for Transmitters........................................................................................................ 9 3.6 Validation Dipole ........................................................................................................................... 10 3.7 Equipment Calibration................................................................................................................... 11 4. SAR MEASUREMENT PROCEDURE ........................................................... 12 5. DESCRIPTION OF TEST POSITION ............................................................ 13 5.1 SAM Phantom Shape.................................................................................................................... 13 5.2 “cheek” Position ............................................................................................................................ 13 5.3 “tilted” Position .............................................................................................................................. 15 5.4 Body Holster/Belt Clip Configurations ........................................................................................... 16 6. MEASUREMENT UNCERTAINTY ................................................................. 18 7. SYSTEM VERIFICATION............................................................................... 20 7.1 Tissue Verification ......................................................................................................................... 20 7.2 Test System Validation .................................................................................................................. 20 8. SAR MEASUREMENT RESULTS.................................................................. 21 8.1 CDMA Head SAR Results ............................................................................................................. 24 8.2 CDMA Body SAR Results(Without Holster) .................................................................................. 25 8.3 PCS Head SAR Results................................................................................................................ 26 8.4 PCS Body SAR Results(Without Holster) .....................................................................................27 9. CONCLUSION ...............................................................................................28 10. REFERENCES .............................................................................................29 APPENDIX A SAR Definition ........................................................................... 31 APPENDIX B Probe Calibration Process ........................................................ 32 APPENDIX C ANSI/IEEE C95.1 – 2005 RF EXPOSURE LIMITS.................. 33 APPENDIX D Test Setup Photographs ........................................................... 34 APPENDIX E The Validation Measurements .................................................. 43 APPENDIX F Plots of The SAR Measurements.............................................. 46 APPENDIX G Probe Calibration ...................................................................... 61 APPENDIX H Calibration of The Validation Dipole .........................................73 FCC ID: A3LSCHR250AReport Number: FH-182-S1 Page : 3 of 30 SAMSUNG Electronics C0. LTD EUT Type: Dual-Band CDMA Phone with Bluetooth Issue Date : Aug.27, 2010 1. GENERAL INFORMATION Test Dates : Aug.20, 2010 ~ Aug.23, 2010 Manufacturer : SAMSUNG ELECTRONICS Co., Ltd. Address : 416 Maetan3-Dong, Suwon City, Korea Test Standard : §2.1093; FCC/OET Bulletin 65, Supplement C(July 2001) FCC Classification : Licensed Portable Transmitter Held to Ear (PCE) Tested for : FCC/TCB Certification 2. DESCRIPTION OF DEVICE Test Sample : Dual-Band CDMA Phone with Bluetooth Model Number : SCH-R250 Serial Number : Identical prototype (S/N : # FH-182-B) Tx Freq. Range : 824.70 ~ 848.31 MHz (CDMA) 1851.25 ~ 1908.75 MHz (PCS) Rx Freq. Range : 869.70 ~ 893.31 MHz (CDMA) 1931.25 ~ 1988.75 MHz (PCS) Antenna Manufacturer : Prtron Model No.: AISCHR250PA CDMA 2000 1x Supported Antenna Dimensions : 40 X 14 X 7.6 (mm) Separation distance between Main and Bluetooth antenna : 29 mm FCC ID: A3LSCHR250AReport Number: FH-182-S1 Page : 4 of 30 SAMS…

Text truncated - open the document above for the full version.

SAMSUNG ELECTRONICS Co., Ltd., Regulatory Compliance Group IT R&D Center 416 Maetan3-Dong, Yeongtong-gu, Suwon city, Gyeonggi-Do, Korea 443-742 FCC CFR47 PART 22 & 24 SUBPART CERTIFICATION REPORT Model Tested: SCH-R250 FCC ID (Requested): A3LSCHR250A Report No: FH-182-R1 Job No: FH-182 Date issued: September 2, 2010 - Abstract – All measurement reported here in accordance with FCC Rules, 47CFR Part2, Part22, Part24 Prepared By KJ KWON - Test Engineer Authorized By WT JANG – Technical Manager © Copyright SAMSUNG Electronics 2010 Report Number : FH-182-R1 2 of 49 TABLE OF CONTENT MEASUREMENT REPORT Page 1. FCC Certification Information .......................................................................................3 1.1 §2.1033 General Information ...................................................................................3 2. INTRODUCTION .............................................................................................................4 2.1 General ....................................................................................................................4 3. MEASURING INSTRUMENT CALIBRATION .................................................................5 4. TEST EQUIPMENT LIST.................................................................................................6 5. DESCRIPTION OF TESTS..............................................................................................7 5.1 Output Power Variation ............................................................................................7 5.2 Effective Radiated Power / Equivalent Isotropic Radiated Power ............................8 5.3 Radiated Spurious & Harmonic Emission ................................................................9 5.4 Peak-Average Ratio ...............................................................................................10 5.5 Occupied Bandwidth .............................................................................................. 11 5.6 Spurious and Harmonic Emissions at Antenna Terminal ........................................ 11 5.6.1 Occupied Bandwidth Emission Limits ........................................................... 11 5.6.2 Conducted Spurious Emission ......................................................................12 5.7 Frequency Stability / Temperature Variation...........................................................13 6. TEST DATA ...................................................................................................................14 6.1 Effective Radiated Power(E.R.P.) ..........................................................................14 6.2 Equivalent Isotropic Radiated Power(E.I.R.P.) .......................................................15 6.3 Cellular CDMA Radiated Spurious & Harmonic measurement...............................16 6.4 PCS CDMA Radiated Spurious & Harmonic measurement ...................................17 6.5 CDMA Radiated Spurious & Harmonic Conversion Table ......................................18 6.6 PCS Radiated Spurious & Harmonic Conversion Table .........................................19 6.7 Frequency Stability.................................................................................................20 6.7.1 CDMA Frequency Stability Table ...................................................................20 6.7.2 PCS Frequency Stability Table ......................................................................21 6.7.3 CDMA Frequency Stability Graph .................................................................22 6.7.4 PCS Frequency Stability Graph ....................................................................24 7. SAMPLE CALCULATION .............................................................................................26 7.1 Emission Designator ..............................................................................................26 8. CONCLUSION...............................................................................................................27 9. TEST PLOT ...................................................................................................................28 Report Number : FH-182-R1 3 of 49 MEASUREMENT REPORT 1. FCC Certification Information The following information is in accordance with FCC Rules, 47CFR Part2, Subpart J, Sections 2.1033 – 2.1055. 1.1 §2.1033 General Information • Applicant Name: SAMSUNG ELECTRONICS CO., LTD. • Address: 416 Maetan3-Dong, Yeongtong-gu, Suwon City Gyeonggi-Do, Korea 443-742 • FCC ID: • Model: A3LSCHR250A SCH-R250 • Quantity: Quantity production is planned • Emission Designators: 1M28F9W(CDMA), 1M28F9W(PCS CDMA) • Tx Freq. Range: 824.70-848.31MHz (CDMA) 1851.25-1908.75MHz (PCS CDMA) • Rx Freq. Range: 869.70-893.31MHz (CDMA) 1931.25-1988.75MHz (PCS CDMA) • Max. Power Rating: 0.124 W ERP CDMA (20.94 dBm) 0.255 W EIRP PCS (24.06 dBm) • FCC Classification(s): PCS Licensed Portable Tx Held to Ear (PCE) • Equipment (EUT) Type: Cellular/PCS CDMA Phone with Bluetooth • Modulation(s): CDMA • Frequency Tolerance: ±0.00025% (2.5ppm) • FCC Rule Part(s): §24(E), §22(H), §2. • Dates of Test: August 18-19, 2010 • Place of Test: SAMSUNG Lab, • Test Report S/N: FH-182-R1 Report Number : FH-182-R1 4 of 49 2. INTRODUCTION 2.1 General These measurement test were conducted at SAMSUNG ELECTRONICS CO., LTD(SUWON). The site address is 416 Maetan3-Dong, Yeongtong-gu, Suwon City, Gyeonggi-Do, Korea 443-742 The site have 1 Fully-anechoic chamber and measurement facility. Measurement Procedure The radiated and spurious measurements were made Fully-anechoic chamber at a 3-meter test range (see Figure2). The equipment under testing was placed on the rotating device at the same height and at a distance of 3-meters from the receive antenna. The rotating device which can rotate horizontal axis was mounted on the turn unit to facilitate rotation around a vertical axis. The measurement was made for each horizon…

Text truncated - open the document above for the full version.

Report Number : AH-068-T1 SAMSUNG ELECTRONICS Co., Ltd., Regulatory Compliance Group IT R&D Center 416, Maetan-3dong, Yeongtong-gu, Suwon-si, Gyeonggi-do, Korea 443-742 TEST REPORT ON HAC Model Tested: SCH-R250 FCC ID (Requested): A 3LSCHR250A Job No: AH-068 Report No: AH-068-T1 Date issued: Sep. 02, 2010 Result Summary: T4 – 2007 (Signal To Noise Category) - Abstract – This document reports on HAC Tests carried out in accordance with ANSI C63.19(2007) §6.3, §7.3, FCC Rule Part(s) FCC 47 CFR §20.19 Prepared By YB KIM – Test Engineer Authorized By JD JANG – Technical Manager Report Number : AH-068-T1 Contents 1. GENERAL INFORMATION ................................................................................................................. 3 2. DESCRIPTION OF DEVICE ............................................................................................................... 3 3. Performance....................................................................................................................................... 4 3.1 RF EMISSIONS...................................................................................................................... 4 3.2 ARTICULATION WEIGHTING FACTOR (AWF)..................................................................... 4 3.3 MAGNETIC COUPLING ........................................................................................................ 5 4. DESCRIPTION OF TEST EQUIPMENT ............................................................................................. 7 4.1 HAC Measurement Setup ......................................................................................................7 4.2 Scanning Mechanism ............................................................................................................. 8 4.3 ITU-T P.50 Artificial Voice ....................................................................................................... 8 4.4 Equipment Calibration ............................................................................................................ 9 5. HAC MEASUREMENT PROCEDURE ............................................................................................. 10 5.1 Ambient Noise Check per C63.19 §6.2.1 ............................................................................. 11 5.2 Measurement System Validation (See Figure 4-1) .............................................................. 11 5.3 Measurement Test Setup .....................................................................................................14 6. MEASUREMENT UNCERTAINTY.................................................................................................... 19 7. Test Results...................................................................................................................................... 20 7.1 Test Summary ...................................................................................................................... 20 7.2 Raw Data for T-coil Measurement........................................................................................ 21 7.3 Frequency Response Graph ................................................................................................ 22 7.4 1KHz Vocoder Application Check......................................................................................... 22 8. Conclusion ....................................................................................................................................... 25 9. Reference ......................................................................................................................................... 26 Report Number : AH-068-T1 1. GENERAL INFORMATION Test Sample : Dual Band CDMA Mobile Phone with Bluetooth Model Number : SCH-R250 Serial Number : Identical prototype (S/N : FH-182-A) Manufacturer : SAMSUNG ELECTRONICS Co., Ltd. Address : 416 Maetan3-Dong, Yeongtong-gu, Suwon City Gyeonggi-Do, Korea 443-742 Test Standard : ANSI C63.19 (2007) §6.3, §7.3, FCC 47 CFR § 20.19 FCC Classification : Licensed Portable Transmitter Held to Ear (PCE) Test Dates : Aug.25,2010 Tested for : FCC/TCB Certification 2. DESCRIPTION OF DEVICE Tx Freq. Range : 824.7 ~ 848.31 MHz(CDMA) 1851.25 ~ 1908.75 MHz(PCS) Rx Freq. Range : 869.7 ~ 893.31 MHz(CDMA) 1931.25 ~ 1988.75 MHz(PCS) Antenna Configuration : AISCHR250PA Antenna Manufacturer : PARTRON Antenna Dimensions : 40mm X 14mm X 7.6mm Report Number : AH-068-T1 3. Performance 3.1 RF EMISSIONS The ANSI Standard presents performance requirements for acceptable interoperability of hearing aids with wireless communications devices. When these parameters are met, a hearing aid operates acceptably in close proximity to a wireless communications device. Category Telephone RF Parameters Near field Category E-field emissions CW dB(V/m) H-field emissions CW dB(A/m) f < 960 MHz M1 56 to 61 + 0.5 x AWF 5.6 to 10.6 +0.5 x AWF M2 51 to 56 + 0.5 x AWF 0.6 to 5.6 +0.5 x AWF M3 46 to 51 + 0.5 x AWF –4.4 to 0.6 +0.5 x AWF M4 < 46 + 0.5 x AWF < –4.4 + 0.5 x AWF f > 960 MHz M1 46 to 51 + 0.5 x AWF –4.4 to 0.6 +0.5 x AWF M2 41 to 46 + 0.5 x AWF –9.4 to –4.4 +0.5 x AWF M3 36 to 41 + 0.5 x AWF –14.4 to –9.4 +0.5 x AWF M4 < 36 + 0.5 x AWF < –14.4 + 0.5 x AWF Table 4-1 Hearing aid and WD near-field categories as defined in ANSI C63.19-2007 [2] 3.2 ARTICULATION WEIGHTING FACTOR (AWF) Standard Technology Articulation Weighing Factor (AWF) T1/T1P1/3GPP UMTS (WCDMA) 0 TIA/EIA/IS-2000 CDMA 0 iDEN TM TDMA (22 and 11 Hz) 0 J-STD-007 GSM (217 Hz) -5 Table 4-2 Articulation Weighting Factors Report Number : AH-068-T1 3.3 MAGNETIC COUPLING Axial and Radial Field Intensity All orientations of the magnetic field, in the axial, horizontal and vertical position along the measurement plane shall be ≥ -18 dB(A/m) at 1 kHz in a 1/3 octave band filter per 7.3.1. Frequency Response The frequency response of the axial component of the magnetic field shall follow the response c…

Text truncated - open the document above for the full version.

SAMSUNG ELECTRONICS Co., Ltd., - Abstract – M4-2007Result Summary :(RF EMISSION Category) 1of TEST REPORT ON HAC Gyeonggi-do, Korea 443-742 This document reports on HAC Tests carried out in accordance with ANSI C63.19(2007), FCC Rule Part(s) FCC 47 CFR §20.19, §6.3, §7.3 Prepared By SCH-R250 A3LSCHR250A AH-068 AH-068-M1 Sep. 3, 2010Date issued : Regulatory Compliance Group IT R&D Center 416, Maetan-3dong, Yeongtong-gu, Suwon-si, Authorized By – Test Engineer Report No : Model Tested: FCC ID (Requested) : Job No : YB KIM JD JANG – Technical Manager 21 Contents 12 11 13 11 4 9 7 8 4 7 3 2. DESCRIPTION OF DEVICE......................................................................................................... 1. GENERAL INFORMATION.......................................................................................................... 6 3 10.1 Measurement Results(E-field)................................................................................................ ... 16 17 17 13 14 9.2 Worst-Case Probe Location Measurements............................................................................... ... 10. Test Results.............................................................................................................................. 158.1 Modulation Factors............................................................................................................... ... AH-068-M1of 18 2 10.3 Worst-case Configuration Evaluation.......................................................................................... 10.2 Measurement Results(H-field)................................................................................................... 11. REFERENCES........................................................................................................................... ... Report Number: 20 21 15 16 16 9.1 Handset Capabilities*............................................................................................................ ... 9. FCC 3G MEASUREMENTS – MAY/JUNE 2006.................................................................................... 3.3 Test Arch Phantom............................................................................................................... ... 3.4 Validation Dipole..................................................................................................................... 7. SYSTEM VERIFICATION............................................................................................................... 7.1 Test System Validation......................................................................................................... ... 3. DESCRIPTION OF TEST EQUIPMENT............................................................................................. 3.1 HAC Measurement Setup...................................................................................................... ... 3.2 Probe Description..................................................................................................................... 3.5 Equipment Calibration............................................................................................................... 8.2 CW and Modulated Signal Zero-span plots.................................................................................... 4. HAC MEASUREMENT PROCEDURE...........................................................................…

Text truncated - open the document above for the full version.