A3LSCX4623FWLaser Printer

SCX-4623FW Series Multi Functional Printer User’s Guide imagine the possibilities Thank you for purchasing this Samsung product. Copyright_ 2 copyright © 2010 Samsung Electronics Co., Ltd. All rights reserved. This user’s guide is provided for information purposes only. All information included herein is subject to change without notice. Samsung Electronics is not responsible for any direct or indirect damages, arising from or related to use of this user’s guide. •Samsung and Samsung logo are trademarks of Samsung Electronics Co., Ltd. •Microsoft, Windows, Windows Vista, Windows 7 and Windows 2008 Server R2 are either registered trademarks or trademarks of Microsoft Corporation. •TrueType, LaserWriter and Macintosh are trademarks of Apple Computer, Inc. •All other brand or product names are trademarks of their respective companies or organizations. Refer to the 'LICENSE.txt' file in the provided CD-ROM for the open source license information. REV. 1.00 Content Content_ 3 COPYRIGHT 2 CONTENT 3 9 Safety information 13 Regulatory information 22 About this user’s guide 24 Features of your new product INTRODUCTION 26 26 Machine overview 26Front view 27Rear view 28 Control panel overview 29 Understanding the LED 29Status LED 29Wireless LED 29 Introducing the useful buttons 29Menu button 29Print screen button 29WPS button 29Power button 30 Turning on the machine GETTING STARTED 31 31 Setting up the hardware 31 Supplied software 32 System requirements 32Microsoft® Windows® 32Macintosh 33Linux 33 Installing USB connected machine’s driver 33Windows 33Macintosh 34Linux 35 Sharing your machine locally 35Windows 35Macintosh NETWORK SETUP 37 37 Network environment 37 Introducing useful network programs 37SyncThru™ Web Service 37SyncThru™ Web Admin Service 37SetIP 37 Using a wired network 37Printing Network Configuration report 38Setting IP address 39Network parameter setting 39Restoring factory default settings 39 Installing wired network connected machine’s driver 39Windows 40Macintosh 41Linux 41 IPv6 Configuration 41Activating IPv6 Content Content Content_ 4 41Setting IPv6 addresses 42Connecting SyncThru™ Web Service WIRELESS NETWORK SETUP 43 43 Using a wireless network with WPS button on the control panel 43Items to prepare 43Choosing your network connection 43Changing WPS mode 43Setting a wireless network in PBC mode 44Setting a wireless network in PIN mode 44 Using a wireless network from the control panel 44Using the control panel 45 Using a wireless network Gfrom the computer 45Choosing your network connection 45Printing network configuration report 46IP addresses 46Wireless network name and Network Key 46Installing the wireless network 46 Setting a wireless network with USB cable 46Installing the machine on a wireless network with an Access Point (Windows) 47Installing the machine on an Ad-Hoc wireless network (Windows) 49Installing the machine on a wireless network with an Access Point (Macintosh) 50Installing the machine on an Ad-Hoc wireless network (Macintosh) 51 Setting a wireless network with network cable 51Preparing items 51Setting IP address 52Configuring the machine’s wireless network 53 Completing the Installation 53 Troubleshooting 53Solving problems that might occur during wireless setting and installing the machine driver 53Solving other problems BASIC SETUP 55 55 Altitude adjustment 55 Changing the display language 55 Setting the date and time 55 Changing the clock mode 56 Changing the default mode 56 Setting sounds 56Speaker, ringer, key sound, and alarm sound 56Speaker volume 56 Entering characters using the number keypad 56Entering alphanumeric characters 56Keypad letters and numbers 56Correcting numbers or names 56Inserting a pause 57 Using the save modes 57Using the toner saving feature 57Using the power saving feature 57 Setting the default tray and paper 57In the control panel 57In the computer 58 Setting job timeout Content Content_ 5 MEDIA AND TRAY 59 59 Preparing originals 59 Loading originals 59On the scanner glass 60In the document feeder 60 Selecting print media 60Guidelines to select the print media 60Media sizes supported in each mode 60 Changing the tray size 61 Loading paper in the tray 61Tray 1 62Manual tray 62 Printing on special media 63Envelope 63Transparency 63Labels 64Card stock/Custom-sized paper 64Letterhead/ Preprinted paper 64Photo 64Glossy 64 Setting the paper size and type 64Setting the paper size 64Setting the paper type 64Setting the paper source 65 Using the output support 65Stacking papers firmly 65Getting the small sized printout PRINTING 66 66 Introducing useful software programs 66Samsung AnyWeb Print 66 Printer driver features 66Printer driver 66 Basic printing 67Canceling a print job 67 Opening printing preferences 67Using a favorite setting 68 Using help 68 Using special print features 68Printing multiple pages on one sheet of paper 68Printing posters 68Printing booklets (Manual) 69Printing on both sides of paper (Manual) 69Change percentage of your document 69Fitting your document to a selected paper size 69Using watermarks 70Using overlay 70Advanced Options 71 Changing the default print settings 71 Setting your machine as a default machine 71 Printing to a file (PRN) 71 Macintosh printing 71Printing a document 72Changing printer settings 72Printing multiple pages on one sheet of paper 72 Linux printing 72Printing from applications 73Printing files Content Content_ 6 73Configuring Printer Properties COPYING 74 74 Basic copy 74 Changing the settings for each copy 74Changing the darkness 74Selecting the type of originals 74Reducing or enlarging copies 75 Changing the default copy settings 75 Using special copy features 75ID card copying 752-up or 4-up copying (N-up) 75Poster copying 76Clone copying 76Erasing background images 76 Deciding the form of copy output 76 Setting copy timeout SCANNING 77 77 Basic scanning method 77 Scanning originals and sending to your computer (Scan to PC) 77For USB connected machine 77For network connected machin…

Text truncated - open the document above for the full version.

Revision 0.2 Main S/W INLET JUPITER 5 Core : 360MHz ARM9 FUSER Unit ThermoStat Thermistor 1 PickUp Clutch Front Cover Micro Switch 24VS 24V DEVELOPER Unit FAN SMPS OPC MHV DEV Supply THV Varistor T D S DRUM M Main Motor MT BLDC CRU M NETWORK BCM5241KMLG 25MHz SOL 4.7k Pull-up (DIR) BLDC_CLK BLDC_MOTOR_READY nBLDC_MOTOR_EN GND 33ohm Pull-down(Break) GND GND 24VS 24VS 1 2 3 4 5 6 7 8 9 10 1 2 3 4 5 6 7 8 9 10 THERMISTOR2FUSER_THERM2 34 5VDM2DP2GNDGND 12345 CN2 Wireless LAN GNDN.C.RD-3.3V_CTR_TAPRD+TD-3.3V_CTR_TAPTD+LED1 POWERLED1LED2 POWERLED2 123456789 101112 CN5 NETWORK I/F 24V GND nLSU_MOT_EN nREADY_LSU CLK_LSU_MOT nLDON_LSU LD_POWER1 GND HSYNC_1 nSH_LSU_1 GND VDO_1_N VDO_2_P GND 5V_LSU 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 CN12 LSU I/F 1 2 3 4 5 1 2 3 4 5 6 7 8 9 10 GNDFAN_SMPS 12 CN15 FAN_MAIN 3.3V_CRUMSDA1_nCRUMSCL1_nCRUMGND 4321 CN17 CRUM THERMISTOR1FUSER_THERM1 12 1 2 3 4 5 6 7 8 CN16 THERMISTOR OPE LCD (16X2) LSU 1 2 3 4 5 6 7 8 SPEAKER LIU MODEM CONEXENT USB 2.0 ISP1761 SYSTEM EEPROM M24256 X 1EA 32KB SERIAL Flash AT25DF321 4MB CISM AFE LAFE 1001 ADF_P_DET ADF_P_POS MT STEP ADF MOTOR AFE_SIGSCAN_CONTROL1GNDCIS_3.3VCIS_OFFSETCIS_SPCIS_CLKCIS_12VCIS_BLEDCIS_GLEDCIS_RLEDGND CN8 CIS 123456789 101112 123456789 101112 PLATEN MOTOR DRIVER A3983SLP OUT1AOUT1BOUT2AOUT2B 1234 CN7 PLATEN MOTOR MT STEP PLATEN MOTOR 4321 Clock Generator ASM3P2863A 12MHz MCLK VCLK USB CLK GND GND 5V PANEL_RXD nRST_PANEL PANEL_TXD nSCANNER_HOME nKEY_POWER_SW MAIN Controller CN6 OPE I/F ADF_P_DETGNDADF_C_SENSADF_P_POSGND3.3VGNDGNDOUT1AOUT1BOUT2AOUT2B CN11 ADF MOTOR I/F Battery CR2032 Battery CR2032 EXIT Sensor Regi Sensor Feed Sensor Empty Sensor Thermistor 2 11 12 CN19 BLDC MOTOR & CLUTCH SPEAKER_OUT1 SPEAKER_OUT2 1 2 CN18 SPK SPI Flash MX25L128 (16MB X 1EA) ADF MOTOR DRIVER A3983SLP 123456789 101112 121110 987654321 24VS REGI_CLUTCH 1 2 SOL Regi Clutch 2 3 4 5 CN22 LINE 2 3 4 5 CN21 EXTERNAL FAN_MAIN N.C. GND 1 2 3 CN FAN MAIN nSENS_P_EMPTY nSENS_P_FEED nSENS_P_REGI GND 24V24V 5V GND 24VS24VS24VS GNDGNDGND 5V_SMPS5V_SMPS nSENS_P_EXIT THV_READ nTHV_EN PWM_THV PWM_MHV PWM_DEV_DC nRELAY_AC_OFF FAN_MAIN FUSER_ON STANDBY CN14 SMPS & HVPS I/F CN MAIN Controller I/F 123456789 1011121314151617181920212223242526 nSENS_P_FEED nSENS_P_EMPTY GND nSENS_P_REGI 24V24V GND 5V 24VS24VS GND 24VS GNDGND 5V_SMPS5V_SMPS THV_READ nSENS_P_EXiT PWM_THV nTHV_EN PWM_DEV_DC PWM_MHV FAN_MAIN nRELAY_AC_OFF STANDBY FUSER_ON 123456789 1011121314151617181920212223242526 FAN MAIN ADF_C_SENS SMPS & HVPS 24VS PICKUP_CLUTCH CN9 PICK_UP CLUTCH VBUSDMINUSDPLUSGNDGNDGND 123456 CN3 USB DEVICE DDR2 SDRAM K4T51163QG-HCE6 (128MB X 2EA) 1 6 6 M H z WLAN EEPROM M24256 X 1EA 32KB

EXTERNAL PICTURES 1) FRONT VIEW 2) REAR VIEW EXTERNAL PICTURES 3) SIDE VIEW 1 4) SIDE VIEW 2 INTERNAL PICTURES 1) FRONT VIEW 2) REAR VIEW

Project No. : LBE093693 MONO LASER MFP : SCX-4623FW -49/50- This report must not be reproduced, except in full, without written permission from SEC EMC Laboratory. Inside View (1) Label Location Project No. : LBE093693 MONO LASER MFP : SCX-4623FW -50/50- This report must not be reproduced, except in full, without written permission from SEC EMC Laboratory. Label

PRINTED BOARD ASSEMBLY PICTURES 1) TOP VIEW OF MAIN CONTROLLER 2) BOTTOM VIEW OF MAIN CONTROLLER PRINTED BOARD ASSEMBLY PICTURES 3) TOP VIEW OF SMPS & HVPS 4) BOTTOM VIEW OF SMPS & HVPS PRINTED BOARD ASSEMBLY PICTURES 5) TOP VIEW OF PANEL 6) BOTTOM VIEW OF PANEL PRINTED BOARD ASSEMBLY PICTURES 7) TOP VIEW OF WIRELESS MODULE 8) BOTTOM VIEW OF WIRELESS MODULE

Project No. : LBE093693 MONO LASER MFP : SCX-4623FW -7/50- This report must not be reproduced, except in full, without written permission from SEC EMC Laboratory. 3.5 EUT Description The following features describe EUT represented by this report: Item Specification Remarks Processor JUPITER5 (375Mhz) - Standard System memory 256MB DDR2 SDRAM - Resolution True 600x600dpi (Addressible 1200dpi support) - Copy Quality mode Text : 600x300dpi(ADF) Mixed : 600x300dpi(ADF) Photo : 600x300dpi(ADF) ,600x600dpi (Platen) - Paper Handling Paper Tray(standard) 250 Sheets Bypass Tray 1 Sheets - Power Rating 110~127 VAC, 5A, 50/60 Hz - Power Consumption Power save mode : 0.7 Watts Printing mode: MAX. 420 Watts - Printer Language GDI, PCL-5 - PC Interfaces USB2.0, NW, FAX, WLAN - OS compatibility MS Windows 98/2000/XP/NT/Me,MAC (English only, no status monitor, web download only) Linux: Red Hat 8.0~9.0, Fedora Core 1~3, Mandrake 9.0~10.2, SuSE 8.2~9.2. Windows 2003. Netware 4.x - Modes of Operation USB Printing, ADF Scan, ADF Copy, 1200dpi Printing, Fax RX, Fax TX, Network Printing - Intended Class for Emissions Class B -

-1/50- E E E M M M C C C T T T E E E S S S T T T R R R E E E P P P O O O R R R T T T Project No. LBE093693 Issue No. 1 Name of organization Samsung Electronics Co., Ltd. Address 416 Maetan 3-Dong, Yeongtong-Gu, Suwon-Si, Gyeonggi-Do 443-742 Korea Applicant Date of application November 26, 2009 Type of device Class B digital devices and peripherals Equipment authorization Declaration of Conformity Certification Verification FCC ID A3LSCX4623FW Kind of product MONO LASER PRINTER SCX-4623FW Model No. Variant Model No. None EUT Manufacturer Samsung Electronics Co., Ltd. 259, Gongdan-Dong, Gumi-City, Gyeong-Buk, 730-030, Korea Samsung Electronics (Shandong) Digital Printing Co., Ltd. 264209, Samsung Road, Weihai Hi-Tech IDZ, Shandong Province, P.R. China Shin Heung Digital Electronics Co., Ltd. 98, Samsung Road, Weihai Hi-Tech IDZ, Shandong Province, P.R. China Intops : Intops (Weihai) Electronics Co., Ltd., Keji Road-268-1 , Weihai Hi-Tech,Industries Development Zone , Shandong Province , CHINA Applied Standards FCC Part 15, Subpart B / ANSI C63.4-2003 Test Period December 01, 2009 ~ December ,11 2009 Issue date December 21 , 2009 Test result : Complied The equipment under test has found to be compliant with the applied standards. (Refer to the attached test result for more detail.) Tested by : Ho Jin Choi Reviewed by : No Cheon Park This report is the test result about the sphere accredited by KOLAS which signed the Mutual Recognition Arrangement of International Laboratory Accreditation Cooperation. The test results in this report only apply to the tested sample. This report must not be reproduced, except in full, without written permission from SEC EMC Laboratory. 416 Maetan 3-Dong, Yeongtong-Gu, Suwon-Si, Gyeonggi-Do, 443-742 Korea Tel: 82 31 277 7752, Fax: 82 31 277 7753 Project No. : LBE093693 MONO LASER MFP : SCX-4623FW -2/50- This report must not be reproduced, except in full, without written permission from SEC EMC Laboratory. Table of contents 1. Summary of test results 1.1 Emission 2. General Information 2.1 Test facility 2.2 Accreditation and listing 3. Test configuration 3.1 Test Peripherals 3.2 EUT operating mode 3.3 Details of Sampling 3.4 Used cable description 3.5 EUT Description 3.6 Clock Frequencies 3.7 Test configuration and condition 3.8 Measurement uncertainty 4. Result of individual tests 4.1 Conducted disturbance 4.2 Radiated disturbance Appendix – EUT photography Project No. : LBE093693 MONO LASER MFP : SCX-4623FW -3/50- This report must not be reproduced, except in full, without written permission from SEC EMC Laboratory. 1. Summary of test results 1.1 Emission The EUT has been tested according to the following specifications: Applied Test type Applied standard Result Remarks Conducted Disturbance Complied Meets Class B Limit Radiated Disturbance FCC Part 15 Subpart B Complied Meets Class B Limit Project No. : LBE093693 MONO LASER MFP : SCX-4623FW -4/50- This report must not be reproduced, except in full, without written permission from SEC EMC Laboratory. 2. General Information 2.1 Test facility The SEC EMC Laboratory is located on Samsung Electronics Co., Ltd. at 416 Maetan 3-Dong, Yeongtong-Gu, Suwon-Si, Gyeonggi-Do, South Korea. All testing are performed in Semi-anechoic chambers conforming to the site attenuation Characteristics defined by ANSI C63.4, CISPR 22, 16-1 and 16-2. and Shielded rooms. The SEC EMC Laboratory is operated as testing laboratory in accordance with the requirements of ISO/IEC 17025:2005. 2.2 Accreditation and listing Laboratory Qualifications Remarks KOLAS(Korea Laboratory Accreditation Scheme) Accredited : 124 UKAS(United Kingdom Accreditation Service) Accredited : 4290 Radio Research Agency Accredited : KR0004 FCC(Federal Communications Commission) Accredited : KR0004 National Voluntary Laboratory Accreditation Program Lab Code: 200623-0 Norges Elektriske Materiellkontroll Accredited : ELA 195 VCCI (Voluntary Control Council for Interference by Information Technology Equipment) C-2421,R-2224 China Quality Certification Center 5-053, 5-054 TUV Rhineland H9354285 GOST(GOSTSTANDART) ROSTEST Elektrotechnicky Zkusebni Ustav Reg. No.: 001 IC(Industry Canada) Assigned Code: 5871 Project No. : LBE093693 MONO LASER MFP : SCX-4623FW -5/50- This report must not be reproduced, except in full, without written permission from SEC EMC Laboratory. 3. Test Setup configuration 3.1 Test Peripherals The following is a listing of the EUT and peripherals utilized during the performance of testing. 3.2 EUT operating mode To achieve compliance applied standard and/or specification, the following mode(s) were considered Operating Mode 1 Standby Operating Mode 2 USB Printing Operating Mode 3 ADF Copy Printing Operating Mode 4 Network Printing Operating Mode 5 Wireless Network Printing Operating Mode 6 Scan to PC Operating Mode 7 Fax-Rx Operating Mode 8 Fax-Tx 3.3 Details of Sampling Customer selected, single units. Description Model No. Serial No. Manufacturer FCC ID and/or DoC MONO LASER MFP SCX-4623FW - Samsung A3LSCX4623FW Notebook PC PP18L 2718225373 DELL DOC AC Adapter LA65LS1-00 CN-OYD637-71615-83C- OE60 DELL For Notebook PC USB Mouse MOARUO 0740007905 Primax electronics DOC Head set - - Micro soft DOC Telephone SP-F209 - Samsung DOC Project No. : LBE093693 MONO LASER MFP : SCX-4623FW -6/50- This report must not be reproduced, except in full, without written permission from SEC EMC Laboratory. 3.4 Used cable description The EUT is configured, installed, arranged and operated in a manner consistent with typical applications. Interface cables/loads/devices are connected to at least one of each type of interface port of the EUT, and where practical, each cable shall be terminated in a device typical of actual usage. The type(s) of interconnecting cables to be used and the interface port (of the EUT) to which these were connected; Connected cable Length [m] Shielded [Y/N] Note Power 1.8 No For EUT Power 1.8 No For Note PC USB 1.8 Yes From Note PC to EUT USB 1.8…

Text truncated - open the document above for the full version.

Project No. : LBE093693 MONO LASER MFP : SCX-4623FW -12/50- This report must not be reproduced, except in full, without written permission from SEC EMC Laboratory. 4.1.3 Photograph of Test Setup Front Rear Project No. : LBE093693 MONO LASER MFP : SCX-4623FW -31/50- This report must not be reproduced, except in full, without written permission from SEC EMC Laboratory. 4.2.3 Photograph of Test Setup Front Rear