A3LSMA145MGSM/WCDMA/LTE Phone with BT/BLE, DTS/UNII a/b/g/n/ac

Quick Reference Guide (Terms and Conditions) SM-A145M/DS SM-A145M SM-A145MB/DS SM-A145MB Read this document before operating the mobile device, accessories, or software (defined collectively and individually as the “Product”) and keep it for future reference. This document contains important Terms and Conditions. Electronic acceptance, opening the packaging, use, or retention of the Product constitutes acceptance of these Terms and Conditions. Visit www.samsung.com/us to view device information, the user manual, and more. You may incur additional charges for accessing the Internet. DRAFT Device Layout To turn on the device, press and hold the Side key for a few seconds. The charger should remain close to the electric socket and easily acc essible while charging. Installing a nano-SIM card Nano-SI M cards are sold separately. Contact us Questions? Visit us.community.samsung.com Get Support Call 1.800.SAMSUNG Service locations Find a service location near you at Samsung.com/us/support/service/locations Switching made simple Whether you are coming from an iOS or Android platform, you can easily transfer your data with Smart Switch. Back up your old phone Back up your old phone using your favorite back-up app. Samsung Smart Switch 1. From your new Galaxy device, tap Settings > Accounts and backup > Smart Switch. 2. Tap Receive data. 3. Select your old device type. 4. Tap Cable (Android) or Wireless (Android and iOS) and follow the prompts to connect your phones. Customize Tap Settings to personalize your phone. Flight mode This disables all wireless functions on your device. You can use only non- network services On the setting screen, tap Flight mode. NOTE: The use of mobile devices on an aircraft or a ship may be subject to federal and local guidelines and restrictions. Check with appropriate author and always follow crew instructions regarding when and how you may use your device. Important legal information Arbitration Agreement - This Product is subject to a binding arbitration agreement between you and SAMSUNG ELECTRONICS AMERICA, INC. (“Samsung”). You can opt out of the agreement within 30 calendar days of the first consumer purchase by emailing [email protected] or calling 1-800-SAMSUNG (726-7864) and providing the applicable information. The full Arbitration Agreement, Standard One-year Limited Warranty, End User License Agreement (EULA), and Health & Safety Information for your device are available online: P hone •English: www.samsung.com/us/Legal/Phone-HSGuide •Spanish: www.samsung.com/us/Legal/Phone-HSGuide-SP This information can also be found on the device in the “About device” or “About phone” or “About tablet” section, for example: •Settings > About phone or About device or About tablet > Legal information > Samsung legal •Or,Search “Legal” I f your device required Federal Communications Commission (FCC) approval, you can view the FCC certification by opening Settings > About phone or About device or About tablet> Status. Health and Safety WARNING! To avoid electri c shock and damage to your device, do not charge device whil e i t is wet or in an area where it co uld get wet. Do not handle device, c harger or cords with wet hands whil e charging. Maint aining dust and water resistance The device is not impervious to dust and water damage in any situation. It is important that all c ompartments are closed tightly. Follow these tip s carefully to prevent damage to the device and maintain dust and water resistance performance: •Water resistant based on IP68 rating, which tests submers ion in fresh water deeper than 1.5 meters or keep it submerged for more than 30 minut es. If device is expo sed to fresh water, dry it thoroughly with a clean, soft cloth; if exposed to liquid other than fresh water, rinse with fresh water and dry as directed. •Any device which uses acces sible compar tments or por t s that can be opened should have th ese se aled or closed tightly to prevent li quid from entering th e system. •If th e device has been immersed i n water or th e microphone or speaker is wet, sound may not be heard clearly during a call. After wipi ng th e device with a dry cloth, dry it thoroughly before using it. •Do not expose t he device to water at high pressure. •If th e device is dropped or receives an impact, th e water and dust resistant features of th e device may be damaged. Note: Liquid other than fresh water may enter th e device fa ster. Failure to rinse th e device in fresh water and dry it as instructed may cause th e device to suffer from operability or cosmetic issues. Samsung Knox Samsung Knox is Samsung’s security platform. Additional licensing fees may be required for enterprise use. For more information about Knox, pl ease refer to: www.samsung.com/us/knox Specific Absorption Rate (SAR) certification information For information about SAR, visit : •https://www.fcc.gov/general/radio-frequency-safety-0 •w ww.fcc.gov/encyclopedia/ s pecific-absorption-rate-sar-cellular-telephones •www.samsung.com/sar Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 1.5cm separation between the device and the user's body. S amsung Wireless Power Sharing feature allows device -to -device charging without the need for a charger. If your device supports the wireless power sharing function, this equipment should be operated with a minimum distance of 20 cm between the device and your body. Note: Foldable devices can be stored in an environment with ambient temperatures of -10°C / 14.0°F to 50°C / 122°F safely; prolonged exposure to temperatures outside these recommended temperatures can pose a high risk of damage to the device. Samsung mobile products and recycling WARNING! Never dispose of batterie s in a fire because th ey may explode. Do not disassemble, crush, puncture, heat, burn or reuse. F or battery and cell phone recycling, go to call2re cy cle. org or call 1- 800-822…

Text truncated - open the document above for the full version.

CFR 47 §2.911 (d)(5) Attestation Date: 02-07-2023 FCC ID: A3LSMA145M To: Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA 1. Samsung Electronics Co., Ltd. (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. 2. Samsung Electronics Co., Ltd. (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment and is not an affiliate or subsidiary of an entity identified on the Covered List. Sincerely yours, Name: Ms. Jenni Chun Job Title: General Manager Regulatory & Environmental Affairs Company Name: Samsung Electronics Co., Ltd.

CFR 47 §2.911 (d)(7) Agent Designation Attestation Date: 02-07-2023 FCC ID: A3LSMA145M To: Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Samsung Electronics Co., Ltd. (“the applicant”) as required by section 2.911(d)(7), designates the following agent, located in the United States, for purposes of acting as the applicant’s agent for service of process. The applicant acknowledges that they will maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. The applicant further acknowledges their responsibility to inform the FCC whenever the agent information changes. U. S. Agent Information: Contact Person : Ms. Jenni Chun Company Name : Samsung Electronics Co., Ltd. FRN: 0027908797 Company Address : 19 Chapin Rd., Building D Pine Brook United States Email : [email protected] Sincerely yours, Name: Ms. Jenni Chun Job Title: General Manager Regulatory & Environmental Affairs Company Name: Samsung Electronics Co., Ltd.

a) comply with the relevant provisions of the certification program; b) make all necessary arrangements for the conduct of the evaluation, including provision for examining documentation and access to all areas, records (including internal audit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment, surveillance, reassessment) and resolution of complaints; c) make claims regarding certification only in respect of the scope for which certification has been granted; d) do not use our product certification in such a manner as to bring the Certification Division into disrepute and not make any statement regarding our product certification which the Certification Division may consider misleading or unauthorized; e) upon suspension or cancellation of certification, discontinue use of all advertising matter that contains any reference thereto and return any certification documents as required by the Certification Division; f) use certification only to indicate the products are certified as being in conformity with specified standards; Date: Jaunuary 26, 2023 UL Verification Services INC, 47173 Benicia St, Fremont CA 94538 United States of America To whom it may concern: I, the undersigned, hereby authorize UL Verification Services , to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by UL Verification Services in US on our behalf s hall have the same effect as acts of our own. In authorizing UL Verfication Services in US as our agent, we still recognize that we are responsible to: g) endeavor to ensure that no certificate or report nor any part thereof is used in a misleading manner; h) ensure that any reference to our product certification in communication media such as documents, brochures or advertising, complies with the requirements of the Certification Division; i) keep a record of all complaints made known to the us relating to the product’s compliance with requirements of the relevant standard and to make these records available to the when requested; j) take appropriate action with respect to such complaints and any deficiencies found in products or services that affect compliance with the requirements for certification; k) document the actions taken. l) the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). This authorization is valid until further written notice from the applicant. Sincerely Yours, Ms. Jenni Chun General Manager Samsung Electronics America, Inc. TEL: +1-973-808-6375 E-mail: [email protected]

Samsung Electronics Co., Ltd. 129, Samsung-ro, Yeongtong-gu Suwon-si, Gyeonggi-do, 16677, Korea Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 E-label Attestation Letter - FCC ID : A3LSMA145M - Model : SM-A145M/DS, SM-A145M, SM-A145MB/DS, SM-A145MB To Whom It May Concern We hereby provide the following attestations according to CFR 2.935 and FCC KDB 784748 D02: At the time of purchase, the FCC ID is readily and physically visible to the purchaser on the exterior package per CFR 2.935(f). The FCC ID will be readily legible without the aid of magnification according to CFR 2.935(d). The literature in the package describes how to access the electronic display to find FCC ID per CFR 2.935(b) and FCC KDB 784748. Per CFR 2.935(c), the user will be able to access this information within a maximum of 3 steps. The user will be able to access this information without a SIM card, special accessories or supplemental plug-ins. Per CFR 2.935(e), We, Samsung Electronics Co., Ltd., have programmed the e-label and it is not able to be modified by any third party. Per CFR 2.935(f), the FCC ID will be able to survive normal shipping and handling so it is visible for inspection at the time of import. Should you have any questions or comments concerning the above, please contact the undersigned. Sincerely, Ms. Jenni Chun General Manager Regulatory & Environmental Affairs Samsung Electronics Co., Ltd. TEL : +1-973-808-6375 E-mail : [email protected]

January 11, 2023 Federal Comm unications Commission 7435 Oakland Mills Road Columbia MD 21046 Subject: FCC ID: Request for Confidentiality A3LSMA145M To Whom It May Concern: Pursuant to the provisions of Sections 0.457 and 0.459 of the Commission’s rules (47 CFR §§ 0. 457, 0.459), we are requesting the Commission to withhold the following attachments as confidential document from public disclosure indefinitely. Schematics Block Diagram Operational Description Parts List Tune-Up Procedure Above mentioned document contains detailed system and equipment description are c onsidered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In additional to above mentioned documents, pursuant to Public Notice DA 04-1705 of the Commission’s policy, in order to comply with the marketing regulations in 47 CFR §2.803 and the importation rules in 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We are requesting the commission to grant short-term confidentiality request on the following attachments until 180 days External Photos Internal Photos Test Setup Photos User Manual It is our understanding that all measurement test reports, FCC ID label format and correspondence during certification review process cannot be granted as confidential documents and such information will be available for public review once the grant of equipment authorization is issued. Best Regards Ms. Jenni Chun General Manager Samsung Electronics America, Inc. TEL: +1-973-808-6375 E-mail: [email protected]

Description of E-label on the A3LSMA145M Dec. 19, 2022 FCC ID : A3LSMA145M This model is applied E-label, please find description of E-label below. Depending on the region or model, some devices are required to receive approval from the Federal Communications Commission(FCC). If your device is approved by the FCC, you can view the FCC ID or the device. To view the FCC ID, tap Settings > About phone > Status information <Device Display Screen> FCC Certification FCC ID : A3LSMA145M

FCC ID: A3LSMA145M DATE: 2023-01-06 UL Korea, Ltd. Suwon Laboratory FORM ID: FCC_15B(04) 218 Maeyeong-ro, Yeongtong-gu, Suwon-si, Gyeonggi-do, 16675, Korea TEL: (031) 337-9902 FAX: (031) 213-5433 UL Korea, Ltd. Confidential This report shall not be reproduced except in full, without the written approval of UL Korea, Ltd. Internal Photo FCC ID: A3LSMA145M DATE: 2023-01-06 UL Korea, Ltd. Suwon Laboratory FORM ID: FCC_15B(04) 218 Maeyeong-ro, Yeongtong-gu, Suwon-si, Gyeonggi-do, 16675, Korea TEL: (031) 337-9902 FAX: (031) 213-5433 UL Korea, Ltd. Confidential This report shall not be reproduced except in full, without the written approval of UL Korea, Ltd. FCC ID: A3LSMA145M DATE: 2023-01-06 UL Korea, Ltd. Suwon Laboratory FORM ID: FCC_15B(04) 218 Maeyeong-ro, Yeongtong-gu, Suwon-si, Gyeonggi-do, 16675, Korea TEL: (031) 337-9902 FAX: (031) 213-5433 UL Korea, Ltd. Confidential This report shall not be reproduced except in full, without the written approval of UL Korea, Ltd. FCC ID: A3LSMA145M DATE: 2023-01-06 UL Korea, Ltd. Suwon Laboratory FORM ID: FCC_15B(04) 218 Maeyeong-ro, Yeongtong-gu, Suwon-si, Gyeonggi-do, 16675, Korea TEL: (031) 337-9902 FAX: (031) 213-5433 UL Korea, Ltd. Confidential This report shall not be reproduced except in full, without the written approval of UL Korea, Ltd.

SAR EVALUATION REPORT IEEE Std 1528-2013 For GSM/WCDMA/LTE Phone with BT/BLE, DTS/UNII a/b/g/n/ac FCC ID: A3LSMA145M Model Name: SM-A145M, SM-A145M/DS, SM-A145MB/DS, SM-A145MB Report Number: 14586572-S1V4 Issue Date: 2023-02-01 Prepared for SAMSUNG ELECTRONICS CO., LTD. 129 Samsung-Ro, Yeongtong-Gu, Suwon-Si, Gyeonggi-Do, 16677, Korea Prepared by UL VERIFICATION SERVICES INC. 47173 BENICIA STREET FREMONT, CA 94538, U.S.A. TEL: (510) 319-4000 FAX: (510) 661-0888 Report No.: 14586572-S1V4 Issue Date: 2023-02-01 Page 2 of 62 UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Revision History Rev. Date Revisions Revised By V1 202-01-17 Initial Issue -- V2 2023-01-26 Section 1: Updated U-NII Extremity value Section 9.5: Updated U-NII 1 802.11ac VHT80 Reduced Power Tune-Up Limit Section 10.14: Updated worst case highlight AJ Newcomer V3 2023-01-31 Section 6.2: Corrected 802.11ac, 80 MHz BW duty cycle Dave Weaver V4 2023-02-01 Sections 1, 10.14, 12.2 and 12.3 updated due to duty cycle correction. Dave Weaver Report No.: 14586572-S1V4 Issue Date: 2023-02-01 Page 3 of 62 UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Table of Contents 1. Attestation of Test Results ............................................................................................................ 5 2. Test Specification, Methods and Procedures .............................................................................. 6 3. Facilities and Accreditation ........................................................................................................... 6 4. SAR Measurement System & Test Equipment ............................................................................ 7 4.1. SAR Measurement System .......................................................................................................... 7 4.2. SAR Scan Procedures .................................................................................................................. 8 4.3. Test Equipment .......................................................................................................................... 10 5. Measurement Uncertainty ........................................................................................................... 10 6. Device Under Test (DUT) Information ........................................................................................ 11 6.1. DUT Description ......................................................................................................................... 11 6.2. Wireless Technologies ............................................................................................................... 12 6.3. General LTE SAR Test and Reporting Considerations .............................................................. 13 6.4. LTE (TDD) Considerations ......................................................................................................... 15 6.5. Power Back-off Operation........................................................................................................... 16 7. RF Exposure Conditions (Test Configurations) ........................................................................ 17 8. Dielectric Property Measurements & System Check ................................................................ 18 8.1. Dielectric Property Measurements .............................................................................................. 18 8.2. System Check............................................................................................................................. 20 9. Conducted Output Power Measurements .................................................................................. 22 9.1. GSM ........................................................................................................................................... 22 9.2. W-CDMA .................................................................................................................................... 24 9.3. LTE ............................................................................................................................................. 29 9.4. Wi-Fi 2.4GHz (DTS Band) .......................................................................................................... 41 9.5. Wi-Fi 5GHz (U-NII Bands) .......................................................................................................... 42 9.6. Bluetooth .................................................................................................................................... 46 10. Measured and Reported (Scaled) SAR Results ......................................................................... 48 10.1. GSM 850 ................................................................................................................................. 50 10.2. GSM 1900 ............................................................................................................................... 50 10.3. W-CDMA Band II .................................................................................................................... 50 10.4. W-CDMA Band IV ................................................................................................................... 51 10.5. W-CDMA Band V .................................................................................................................... 51 10.6. LTE Band 2 (20MHz Bandwidth)............................................................................................. 52 10.7. LTE Band 5 (10MHz Bandwidth)............................................................................................. 52 Report No.: 14586572-S1V4 Issue Date: 2023-02-01 Page 4 of 62 UL Verification Services Inc. Doc. No.: 1.0 This report sha…

Text truncated - open the document above for the full version.

Plot No. 1 UL Verification Services Inc. SAR Lab 5 Date/Time: 2022-12-05, 17:47 System Performance Check Report for D750V3 - SN1019 Exposure Conditions Frequency [MHz] | Channel Number 750.0 | 0 TSL Permittivity 42.5 Group | UID CW | 0-- TSL Conductivity [S/m] 0.875 Conversion Factor 9.76 Phantom Section | TSL Flat | HSL Hardware Setup Probe | Calibration Date EX3DV4 - SN7463 | 2022-05-27 Phantom Twin-SAM V8.0 (30deg probe tilt) DAE | Calibration Date DAE4 Sn1257 | 2022-09-20 TSL Type HBBL-600-10000 Scans Setup Area Scan Zoom Scan Grid Extents [mm] 40.0 x 90.0 30.0 x 30.0 x 30.0 Grid Steps [mm] 10.0 x 15.0 6.0 x 6.0 x 1.5 Sensor Surface [mm] 3.0 1.4 Graded Grid n/a Yes M2/M1 [%] 88.0 Dist 3dB Peak [mm] > 15.0 Measurement Results Area Scan Zoom Scan psSAR1g [W/Kg] 0.879 0.873 psSAR10g [W/Kg] 0.589 0.580 Power Drift [dB] n/a -0.01 Plot No. 2 UL Verification Services Inc. SAR Lab 5 Date/Time: 2022-12-05, 18:53 System Performance Check Report for D900V2 - SN1d143 Exposure Conditions Frequency [MHz] | Channel Number 900.0 | 0 TSL Permittivity 41.9 Group | UID CW | 0-- TSL Conductivity [S/m] 0.928 Conversion Factor 9.32 Phantom Section | TSL Flat | HSL Hardware Setup Probe | Calibration Date EX3DV4 - SN7463 | 2022-05-27 Phantom Twin-SAM V8.0 (30deg probe tilt) DAE | Calibration Date DAE4 Sn1257 | 2022-09-20 TSL Type HBBL-600-10000 Scans Setup Area Scan Zoom Scan Grid Extents [mm] 40.0 x 90.0 30.0 x 30.0 x 30.0 Grid Steps [mm] 10.0 x 15.0 6.0 x 6.0 x 1.5 Sensor Surface [mm] 3.0 1.4 Graded Grid n/a Yes M2/M1 [%] 87.3 Dist 3dB Peak [mm] 21.3 Measurement Results Area Scan Zoom Scan psSAR1g [W/Kg] 1.12 1.13 psSAR10g [W/Kg] 0.730 0.746 Power Drift [dB] n/a 0.02 Plot No. 3 UL Verification Services Inc. SAR Lab 5 Date/Time: 2022-12-05, 19:30 System Performance Check Report for D1750V2 - SN1050 Exposure Conditions Frequency [MHz] | Channel Number 1750.0 | 0 TSL Permittivity 40.1 Group | UID CW | 0-- TSL Conductivity [S/m] 1.33 Conversion Factor 8.51 Phantom Section | TSL Flat | HSL Hardware Setup Probe | Calibration Date EX3DV4 - SN7463 | 2022-05-27 Phantom Twin-SAM V8.0 (30deg probe tilt) DAE | Calibration Date DAE4 Sn1257 | 2022-09-20 TSL Type HBBL-600-10000 Scans Setup Area Scan Zoom Scan Grid Extents [mm] 40.0 x 90.0 30.0 x 30.0 x 30.0 Grid Steps [mm] 10.0 x 15.0 6.0 x 6.0 x 1.5 Sensor Surface [mm] 3.0 1.4 Graded Grid n/a Yes M2/M1 [%] 82.4 Dist 3dB Peak [mm] 10.8 Measurement Results Area Scan Zoom Scan psSAR1g [W/Kg] 3.75 3.74 psSAR10g [W/Kg] 2.03 2.03 Power Drift [dB] n/a 0.01 Plot No. 4 UL Verification Services Inc. SAR Lab 5 Date/Time: 2022-12-05, 22:04 System Performance Check Report for D1900V2 - SN5d163 Exposure Conditions Frequency [MHz] | Channel Number 1900.0 | 0 TSL Permittivity 39.9 Group | UID CW | 0-- TSL Conductivity [S/m] 1.42 Conversion Factor 8.12 Phantom Section | TSL Flat | HSL Hardware Setup Probe | Calibration Date EX3DV4 - SN7463 | 2022-05-27 Phantom Twin-SAM V8.0 (30deg probe tilt) DAE | Calibration Date DAE4 Sn1257 | 2022-09-20 TSL Type HBBL-600-10000 Scans Setup Area Scan Zoom Scan Grid Extents [mm] 40.0 x 90.0 30.0 x 30.0 x 30.0 Grid Steps [mm] 10.0 x 15.0 6.0 x 6.0 x 1.5 Sensor Surface [mm] 3.0 1.4 Graded Grid n/a Yes M2/M1 [%] 81.2 Dist 3dB Peak [mm] 10.3 Measurement Results Area Scan Zoom Scan psSAR1g [W/Kg] 4.18 4.21 psSAR10g [W/Kg] 2.19 2.23 Power Drift [dB] n/a 0.01 Plot No. 5 UL Verification Services Inc. SAR Lab 7 Date/Time: 2022-12-05, 23:28 System Performance Check Report for D2450V2 - SN899 Exposure Conditions Frequency [MHz] | Channel Number 2450.0 | 0 TSL Permittivity 40.6 Group | UID CW | 0-- TSL Conductivity [S/m] 1.82 Conversion Factor 7.74 Phantom Section | TSL Flat | HSL Hardware Setup Probe | Calibration Date EX3DV4 - SN3991 | 2022-09-22 Phantom Twin-SAM V5.0 (30deg probe tilt) DAE | Calibration Date DAE4 Sn1377 | 2022-09-15 TSL Type HBBL-600-10000 Scans Setup Area Scan Zoom Scan Grid Extents [mm] 40.0 x 80.0 30.0 x 30.0 x 30.0 Grid Steps [mm] 10.0 x 10.0 5.0 x 5.0 x 1.5 Sensor Surface [mm] 3.0 1.4 Graded Grid n/a Yes M2/M1 [%] 77.9 Dist 3dB Peak [mm] 9.0 Measurement Results Area Scan Zoom Scan psSAR1g [W/Kg] 5.24 5.31 psSAR10g [W/Kg] 2.44 2.48 Power Drift [dB] n/a 0.01 Plot No. 6 UL Verification Services Inc. SAR Lab 7 Date/Time: 2022-12-05, 23:52 System Performance Check Report for D2600V2 - SN1036 Exposure Conditions Frequency [MHz] | Channel Number 2600.0 | 0 TSL Permittivity 40.3 Group | UID CW | 0-- TSL Conductivity [S/m] 1.94 Conversion Factor 7.55 Phantom Section | TSL Flat | HSL Hardware Setup Probe | Calibration Date EX3DV4 - SN3991 | 2022-09-22 Phantom Twin-SAM V5.0 (30deg probe tilt) DAE | Calibration Date DAE4 Sn1377 | 2022-09-15 TSL Type HBBL-600-10000 Scans Setup Area Scan Zoom Scan Grid Extents [mm] 40.0 x 80.0 30.0 x 30.0 x 30.0 Grid Steps [mm] 10.0 x 10.0 5.0 x 5.0 x 1.5 Sensor Surface [mm] 3.0 1.4 Graded Grid n/a Yes M2/M1 [%] 78.5 Dist 3dB Peak [mm] 9.0 Measurement Results Area Scan Zoom Scan psSAR1g [W/Kg] 5.78 5.83 psSAR10g [W/Kg] 2.58 2.63 Power Drift [dB] n/a 0.00 Plot No. 7 UL Verification Services Inc. SAR Lab 7 Date/Time: 2022-12-07, 23:37 System Performance Check Report for D5GHzV2 - SN1003 Exposure Conditions Frequency [MHz] | Channel Number 5600.0 | 0 TSL Permittivity 36.5 Group | UID CW | 0-- TSL Conductivity [S/m] 4.91 Conversion Factor 4.65 Phantom Section | TSL Flat | HSL Hardware Setup Probe | Calibration Date EX3DV4 - SN3991 | 2022-09-22 Phantom Twin-SAM V5.0 (30deg probe tilt) DAE | Calibration Date DAE4 Sn1377 | 2022-09-15 TSL Type HBBL-600-10000 Scans Setup Area Scan Zoom Scan Grid Extents [mm] 40.0 x 80.0 22.0 x 22.0 x 22.0 Grid Steps [mm] 10.0 x 10.0 4.0 x 4.0 x 1.4 Sensor Surface [mm] 3.0 1.4 Graded Grid n/a Yes M2/M1 [%] 64.0 Dist 3dB Peak [mm] 7.9 Measurement Results Area Scan Zoom Scan psSAR1g [W/Kg] 8.36 8.80 psSAR10g [W/Kg] 2.37 2.53 Power Drift [dB] n/a -0.03 Plot No. 8 UL Verification Services Inc. SAR Lab 7 Date/Time: 2022-12-14, 20:21 System Performance Check Report for D5GHzV2 - SN1003 Exposure Conditi…

Text truncated - open the document above for the full version.

Plot No. 1 UL Verification Services Inc. SAR Lab 5 Date/Time: 2022-12-05, 23:09 Measurement Report for GSM 850: GPRS-FDD (TDMA, GMSK, TN 0-1-2-3), CHEEK Exposure Conditions Band GSM 850 TSL Permittivity 42.0 Frequency [MHz] | Channel Number 836.6 | 190 TSL Conductivity [S/m] 0.906 Group | UID GSM | 10028-DAC Phantom Section | TSL LeftHead | HSL Conversion Factor 9.32 Test Distance [mm] 0.00 Hardware Setup Probe | Calibration Date EX3DV4 - SN7463 | 2022-05-27 Phantom Twin-SAM V8.0 (30deg probe tilt) DAE | Calibration Date DAE4 Sn1257 | 2022-09-20 TSL Type HBBL-600-10000 Scans Setup Area Scan Zoom Scan Grid Extents [mm] 120.0 x 210.0 30.0 x 30.0 x 30.0 Grid Steps [mm] 15.0 x 15.0 6.0 x 6.0 x 1.5 Sensor Surface [mm] 3.0 1.4 Graded Grid n/a Yes M2/M1 [%] 95.5 Dist 3dB Peak [mm] 20.2 Measurement Results Area Scan Zoom Scan psSAR1g [W/Kg] 0.054 0.056 psSAR10g [W/Kg] 0.037 0.043 Power Drift [dB] n/a 0.07 Plot No. 2 UL Verification Services Inc. SAR Lab 5 Date/Time: 2022-12-06, 11:18 Measurement Report for GSM 850: GPRS-FDD (TDMA, GMSK, TN 0-1-2-3), FRONT Exposure Conditions Band GSM 850 TSL Permittivity 42.0 Frequency [MHz] | Channel Number 836.6 | 190 TSL Conductivity [S/m] 0.906 Group | UID GSM | 10028-DAC Phantom Section | TSL Flat | HSL Conversion Factor 9.32 Test Distance [mm] 15.00 Hardware Setup Probe | Calibration Date EX3DV4 - SN7463 | 2022-05-27 Phantom Twin-SAM V8.0 (30deg probe tilt) DAE | Calibration Date DAE4 Sn1257 | 2022-09-20 TSL Type HBBL-600-10000 Scans Setup Area Scan Zoom Scan Grid Extents [mm] 120.0 x 210.0 30.0 x 30.0 x 30.0 Grid Steps [mm] 15.0 x 15.0 6.0 x 6.0 x 1.5 Sensor Surface [mm] 3.0 1.4 Graded Grid n/a Yes M2/M1 [%] 91.0 Dist 3dB Peak [mm] > 15.0 Measurement Results Area Scan Zoom Scan psSAR1g [W/Kg] 0.129 0.135 psSAR10g [W/Kg] 0.091 0.104 Power Drift [dB] n/a -0.15 Plot No. 3 UL Verification Services Inc. SAR Lab 5 Date/Time: 2022-12-06, 12:55 Measurement Report for GSM 850: GPRS-FDD (TDMA, GMSK, TN 0-1-2-3), EDGE RIGHT Exposure Conditions Band GSM 850 TSL Permittivity 42.0 Frequency [MHz] | Channel Number 836.6 | 190 TSL Conductivity [S/m] 0.906 Group | UID GSM | 10028-DAC Phantom Section | TSL Flat | HSL Conversion Factor 9.32 Test Distance [mm] 10.00 Hardware Setup Probe | Calibration Date EX3DV4 - SN7463 | 2022-05-27 Phantom Twin-SAM V8.0 (30deg pro…

Text truncated - open the document above for the full version.