A3LSMA516UMobile Phone

FCC ID : A3LSMA516U MODEL : SM-A516U, SM-A516U1 Package content • Device • USB cable • Ejection pin • USB power adaptor • Quick start guide The items supplied with the device may vary by region. Accessing more information To view the full user manual on your device, launch the Settings app and tap User manual. Visit www.samsung.com to view device information, the user manual, and more. • The user manual may not be available depending on the web browser or service provider. • You may incur additional charges for accessing the Internet. To turn on the device, press and hold the Power key for a few seconds. Installing a nano-SIM card and a microSD card Insert the ejection pin into the hole next to the tray to loosen the tray. Gently press the card into the tray to secure it. • Use only a nano-SIM card. • Ensure that the ejection pin is perpendicular to the hole. Otherwise, the device may be damaged. • If the card is not fixed firmly into the tray, the card may leave or fall out of the tray. Nano-SIM cards and microSD cards are sold separately. Charging the battery Before using the device for the first time, you must charge the battery. Use only USB Type-C cable supplied with the device. The device may be damaged if you use Micro USB cable. The charger should remain close to the electric socket and easily accessible while charging. Using the Home button When you turn on the screen, the Home button will appear at the bottom of the screen as a soft button. Correct disposal This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger, headset, USB cable) should not be disposed of with other household waste. This product is RoHS compliant. This marking on the battery, manual or packaging indicates that the batteries in this product should not be disposed of with other household waste. Safety information Read all safety information before using the device to ensure safe and proper use. Warning Follow the warning information provided below to prevent incidents such as fire or explosion • Do not expose the device to physical impact or damage. • Use manufacturer-approved batteries, chargers, accessories, and supplies. • Prevent the multipurpose jack and battery terminals from contacting conductive elements, such as metal or liquids. • If any part of the device, such as the glass or acrylic body, is broken, smokes, or emits a burning odor, stop using the device immediately. Use the device again only after it has been repaired at a Samsung Service Centre. • Do not turn on or use the device when the battery compartment is exposed. Follow the warnings below to prevent injury to people or damage to the device • Do not allow children or animals to chew or suck the device. • If the device has a camera flash or light, do not use it close to the eyes of people or animals. • The device can be used in locations with an ambient temperature of 0 °C to 35 °C. You can store the device at an ambient temperature of -20 °C to 50 °C. Using or storing the device outside of the recommended temperature ranges may damage the device or reduce the battery’s lifespan. • Do not use your device in a hot environment or near fire. • Comply with all safety warnings and regulations regarding mobile device usage while operating a vehicle. To prevent possible hearing damage when using a headset, do not listen to sound at high volume for long periods. You can view more safety information, including device and battery disposal instructions, in the safety information menu of the Settings app. • It is recommended not to use fixed graphics on part or all of the touchscreen for extended periods. Doing so may result in afterimages (screen burn-in) or ghosting. Specific Absorption Rate (SAR) certification information THIS DEVICE MEETS INTERNATIONAL GUIDELINES FOR EXPOSURE TO RADIO WAVES Your mobile is designed not to exceed the limits for exposure to radio waves recommended by international guidelines. The guidelines were developed by an independent scientific organigation (ICNIRP) and include a substantial safety margin designed to assure the safety of all persons, regardless of age and health. The radio wave exposure guidelines use a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit for mobile devices is 2.0 W/kg. The highest SAR values under the ICNIRP guidelines for this device model are: SAR values for U.S.: The SAR values below are only for devices developed for use in U.S. Maximum SAR for this model and conditions under which it was recorded Head SAR TBD W/kg Body-worn SAR TBD W/kg Body-worn SAR testing has been carried out at a separation distance of 0.5 cm. To meet RF exposure guidelines during body-worn operation, the device should be positioned at least this distance away from the body. For SAR values for all other countries: For SAR values specific to your model, visit www.samsung.com/sar and search for your region and device with the model number. The use of WLAN band is restricted to indoor use only. This restriction will be applied in all countries below. Draft Copyright © 2020 Samsung Electronics •To transfer data of the previous device to a new device: Visit ww.samsung.com/smartswitch for more information. • If your device is frozen and unresponsive, press and hold the Power key and the Volume Down key simultaneously for more than 7 seconds to restart it. Some content may differ from your device depending on the region, service provider, or software version, and is subject to change without prior notice. Copyright © 2020 Samsung Electronics Specific Absorption Rate (SAR) Certification Information Your device is a radio transmitter and receiver. It is designed and manufactured not to exceed the exposure limits for Radio Frequency (RF) energy set by the Federal Communications Commission (FCC) of the U.S. Government. These FCC RF exposure limits are derived from the recommendations of two expert organizations: the National Council …

Text truncated - open the document above for the full version.

Samsung Electronics America, Inc 19 Chapin Rd, Building D. Pine Brook, NJ 07058 Date: Jun. 24, 2020 FCC ID: A3LSMA516U To whom it may concern: We, the undersigned, hereby authorize HCT Co., LTD to act on our behalf in all matters relating to applications for equipment authorization, including the signing of all documents relating to these matters. Any and all acts carried out by HCT Co., LTD on our behalf shall have the same effect as acts of our own. We also hereby certify that no party to any application is subject to a denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S. C. 862. Sincerely, ---------------------------------------------------- Jenni Chun / General Manager Samsung Electronics America, Inc. Address: 19 Chapin Rd., Building D Pine Brook, NJ 07058 Tel: 1-973-808-6375

DATE : Jun. 24, 2020 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Subject: FCC ID: Request for Confidentiality A3LSMA516U To Whom It May Concern: Pursuant to the provisions of Sections 0.457 and 0.459 of the Commission’s rules (47 CFR §§ 0.457, 0.459), we are requesting the Commission to withhold the following attachments as confidential document from public disclosure indefinitely. Schematics Block Diagram Operational Description Antenna Specification Parts List Tune-Up Procedure Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In additional to above mentioned documents, pursuant to Public Notice DA 04-1705 of the Commission’s policy, in order to comply with the marketing regulations in 47 CFR §2.803 and the importation rules in 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We are requesting the commission to grant short-term confidentiality request on the following attachments until 180 days External Photos Internal Photos Test Setup Photos User Manual It is our understanding that all measurement test reports, FCC ID label format and correspondence during certification review process cannot be granted as confidential documents and such information will be available for public review once the grant of equipment authorization is issued. Best Regards ---------------------------------------------------- Jenni Chun / General Manager Samsung Electronics America, Inc. Address: 19 Chapin Rd., Building D Pine Brook, NJ 07058 Tel: 1-973-808-6375

Samsung Electronics Co., LTD. 12 9, Sa msu ng -ro , Yeongton g-gu Suwon-City, Gyeong gi-d o, 16677, Ko rea Date: June.24, 2020 Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Subject: Label Statement FCC ID: A3LSMA516U To Whom it Ma y Concern We hereby provide the following attestations according to CFR 2.935 and FCC KDB 784748 D02: At the time of purchase, the FCC ID is readily and physically visible to the purchaser on the exterior package per CFR 2.935(f). The FCC ID will be readily legible without the aid of magnification according to CFR 2.935(d). The literature in the package describes how to access the electr onic display to find the FCC ID per CFR 2. 935(b) and FCC KDB 784748. Per CFR 2.935(c), the user will be able to access this information within a maximum of 3 steps. The user will be able to access this information without a SIM card, special accessories or supplemental plug- ins. Per CFR 2.935(e), We, Samsung have programmed the e- label and it is not able to be modified by any third party. Per CFR 2.935(f), the FCC ID will be able to survive normal shipping and handling so it is visible for in spection at the time of import. Shou ld you have any questions or comments concern ing the abov e, please contact the und ersigned. Sincerely, ---------------------------------------------------- Jenni Chun / General Manager Samsung Electronics America, Inc. Address: 19 Chapin Rd., Building D Pine Brook, NJ 07058 Tel: 1-973-808-6375

FCC ID: A3LSMA516U F-TP22-03 (Rev.00) 1 / 7 HCT CO.,LTD. EXTERNAL PHOTOGRAPHS FCC ID: A3LSMA516U F-TP22-03 (Rev.00) 2 / 7 HCT CO.,LTD. 1. External Photo (Front view) FCC ID: A3LSMA516U F-TP22-03 (Rev.00) 3 / 7 HCT CO.,LTD. 2. External Photo (Rear view) FCC ID: A3LSMA516U F-TP22-03 (Rev.00) 4 / 7 HCT CO.,LTD. 3. External Photo (Left side view) FCC ID: A3LSMA516U F-TP22-03 (Rev.00) 5 / 7 HCT CO.,LTD. 4. External Photo (Right side view) FCC ID: A3LSMA516U F-TP22-03 (Rev.00) 6 / 7 HCT CO.,LTD. 5. External Photo (Top view) FCC ID: A3LSMA516U F-TP22-03 (Rev.00) 7 / 7 HCT CO.,LTD. 6. External Photo (Bottom view)

Description of E-label on the A3LSMA516U June. 11th, 2020 FCC ID: A3LSMA516U This model is applied E-label, please find description of E-label below. 1. FCC ID(E-label): Settings > About Phone > Status <Device Display Screen> 3. FCC ID on the Quick Start Guide The FCC has granted an Equipment Authorization for this model device based on the compliance of all reported SAR levels with the FCC RF exposure guidelines. This device has a FCC ID number A3LSMA516U and the specific SAR levels for this device can be found at the following FCC website: www.fcc.gov/oet/eat/. The SAR information for this device can be also be found on Samsung's website: www.samsung.com/sar. 2. Instruction of E-label on the User manual (online manual) Depending on the region or modil, some devices are required to receive approval from the Federal Communications Commission(FCC). if your device is approved by the FCC, you can view the FCC ID or the device. To view the FCC ID, tap Settings > About phone > Status

FCC ID: A3LSMA516U F-TP22-03 (Rev.00) 1 / 15 HCT CO.,LTD. - INTERNAL PHOTOGRAPHS FCC ID: A3LSMA516U F-TP22-03 (Rev.00) 2 / 15 HCT CO.,LTD. ■ Main / Bluetooth & WLAN Antenna Internal Photo FCC ID: A3LSMA516U F-TP22-03 (Rev.00) 3 / 15 HCT CO.,LTD. 1. Internal Photo FCC ID: A3LSMA516U F-TP22-03 (Rev.00) 4 / 15 HCT CO.,LTD. 2. Internal Photo FCC ID: A3LSMA516U F-TP22-03 (Rev.00) 5 / 15 HCT CO.,LTD. 3. Internal Photo FCC ID: A3LSMA516U F-TP22-03 (Rev.00) 6 / 15 HCT CO.,LTD. 4. Internal Photo FCC ID: A3LSMA516U F-TP22-03 (Rev.00) 7 / 15 HCT CO.,LTD. 5. Internal Photo FCC ID: A3LSMA516U F-TP22-03 (Rev.00) 8 / 15 HCT CO.,LTD. 6. Internal Photo FCC ID: A3LSMA516U F-TP22-03 (Rev.00) 9 / 15 HCT CO.,LTD. 7. Internal Photo FCC ID: A3LSMA516U F-TP22-03 (Rev.00) 10 / 15 HCT CO.,LTD. 8. Internal Photo FCC ID: A3LSMA516U F-TP22-03 (Rev.00) 11 / 15 HCT CO.,LTD. 9. Internal Photo FCC ID: A3LSMA516U F-TP22-03 (Rev.00) 12 / 15 HCT CO.,LTD. 10. Internal Photo FCC ID: A3LSMA516U F-TP22-03 (Rev.00) 13 / 15 HCT CO.,LTD. 11. Internal Photo FCC ID: A3LSMA516U F-TP22-03 (Rev.00) 14 / 15 HCT CO.,LTD. 12. Internal Photo FCC ID: A3LSMA516U F-TP22-03 (Rev.00) 15 / 15 HCT CO.,LTD. 13. Internal Photo

74, Seoicheon-ro 578beon-gil, Majang-myeon, Icheon-si, Gyeonggi-do, 17383, Rep. of KOREA TEL: +82-31-645-6300 FAX: +82-31-645-6401 F-TP22-03 (Rev.00) 1 / 39 HCT CO.,LTD. FCC ANT + REPORT Certification A Applicant Name: SAMSUNG Electronics Co., Ltd. Address: 129, Samsung-ro, Yeongtong-gu, Suwon-si, Gyeonggi-do, 16677, Rep. of Korea Date of Issue: June 26, 2020 Test Site/Location: 74, Seoicheon-ro 578beon-gil, Majang-myeon, Icheon- si, Gyeonggi-do, 17383 KOREA Report No.: HCT-RF-2006-FC011 FCC ID: APPLICANT: A3LSMA516U SAMSUNG Electronics Co., Ltd. Model: SM-A516U Additional Model: SM-A516U1 EUT Type: Mobile Phone Max. RF Output Power: 88.31 dBuV/m @3 m Frequency Range: 2402 MHz -2480 MHz Modulation type GFSK FCC Classification: Low Power communication Device Transmitter(DXX) FCC Rule Part(s): Part 15 subpart C 15.249 Engineering Statement: The measurements shown in this report were made in accordance with the procedures indicated, and the emissions from this equipment were found to be within the limits applicable. I assume full responsibility for the accuracy and completeness of these measurements, and for the qualifications of all persons taking them. It is further stated that upon the basis of the measurements made, the equipment tested is capable of operation in accordance with the requirements of the FCC Rules under normal use and maintenance. Report No.: HCT-RF-2006-FC011 FCC ID: A3LSMA516U REVIEWED BY Report prepared by : Jeong Ho Kim Engineer of Telecommunication Testing Center Report approved by : Jong Seok Lee Manager of Telecommunication Testing Center This report only responds to the tested sample and may not be reproduced, except in full, without written approval of the HCT Co., Ltd. This test results were applied only to the test methods required by the standard. This laboratory is not accredited for the test results marked *. The above Test Report is the accredited test result by KOLAS(Korea Laboratory Accreditation Scheme), which signed the ILAC-MRA. (HCT Accreditation No.: KT197) F-TP22-03 (Rev.00)2 / 39 HCT CO., LTD. Report No.: HCT-RF-2006-FC011 FCC ID: A3LSMA516U F-TP22-03 (Rev.00) 3 / 39 HCT CO.,LTD. Version TEST REPORT NO. DATE DESCRIPTION HCT-RF-2006-FC011 June 26, 2020 - First Approval Report Report No.: HCT-RF-2006-FC011 FCC ID: A3LSMA516U F-TP22-03 (Rev.00) 4 / 39 HCT CO.,LTD. Table of Contents REVIEWED BY .................................................................................................................................................. 2 1. EUT DESCRIPTION .................................................................................................................................. 5 2. TEST METHODOLOGY ............................................................................................................................ 6 EUT CONFIGURATION ............................................................................................................................. 6 EUT EXERCISE ......................................................................................................................................... 6 GENERAL TEST PROCEDURES ............................................................................................................. 6 DESCRIPTION OF TEST MODES ............................................................................................................ 7 3. INSTRUMENT CALIBRATION .................................................................................................................. 7 4. FACILITIES AND ACCREDITATIONS ...................................................................................................... 7 FACILITIES ................................................................................................................................................ 7 EQUIPMENT .............................................................................................................................................. 7 5. ANTENNA REQUIREMENTS .................................................................................................................... 7 6. MEASUREMENT UNCERTAINTY ............................................................................................................ 8 7. DESCRIPTION OF TESTS ........................................................................................................................ 9 8. SUMMARY TEST OF RESULTS ................................................................................................................ 22 9. TEST RESULT ............................................................................................................................................ 23 9.1 DUTY CYCLE ..................................................................................................................................... 23 9.2 OCCUPIED BANDWIDTH ................................................................................................................. 24 9.3 RADIATED MEASUREMENT. ........................................................................................................... 26 9.3.1 FUNDAMENTAL FIELD STRENGTH LEVEL MEASUREMENT ........................................... 26 9.3.2 RADIATED SPURIOUS EMISSIONS ...................................................................................... 28 9.3.3 RADIATED BAND EDGES MEASUREMENTS ...................................................................... 31 9.4 POWERLINE CONDUCTED EMISSIONS ........................................................................................ 33 10. LIST OF TEST EQUIPMENT .................................................................................................................... 37 11. ANNEX A_ TEST SETUP PHOTO ............................................................................................................ 39 Report No.: HCT-RF-2006-FC011 FCC ID: A3LSMA516U F-TP22-03 (Rev.00) 5 / 39 HCT CO.,LTD. 1. EUT DESCRIPTIO…

Text truncated - open the document above for the full version.

74, Seoicheon-ro 578beon-gil, Majang-myeon, Icheon-si, Gyeonggi-do, 17383, Rep. of KOREA TEL: +82-31-645-6300 FAX: +82-31-645-6401 F-TP22-03 (Rev.00) 1 / 33 HCT CO.,LTD. FCC NFC REPORT Certification A Applicant Name: SAMSUNG Electronics Co., Ltd. Address: 129, Samsung-ro, Yeongtong-gu, Suwon-si, Gyeonggi-do, 16677, Rep. of Korea Date of Issue: June 26, 2020 Test Site/Location: 74, Seoicheon-ro 578beon-gil, Majang-myeon, Icheon- si, Gyeonggi-do, 17383 KOREA Report No.: HCT-RF-2006-FC012 FCC ID: APPLICANT: A3LSMA516U SAMSUNG Electronics Co., Ltd. Model: SM-A516U Additional Model: SM-A516U1 EUT Type: Mobile Phone RF Output Field Strength: 12.73 dBuV/m @30 m Frequency of Operation: 13.56 MHz Modulation type: ASK FCC Classification: Low Power Communication Device – Transmitter FCC Rule Part(s): FCC Part 15.225 Subpart C Engineering Statement: The measurements shown in this report were made in accordance with the procedures indicated, and the emissions from this equipment were found to be within the limits applicable. I assume full responsibility for the accuracy and completeness of these measurements, and for the qualifications of all persons taking them. It is further stated that upon the basis of the measurements made, the equipment tested is capable of operation in accordance with the requirements of the FCC Rules under normal use and maintenance. Report No.: HCT-RF-2006-FC012 FCC ID: A3LSMA516U REVIEWED BY Report prepared by : Jeong Ho Kim Engineer of Telecommunication Testing Center Report approved by : Jong Seok Lee Manager of Telecommunication Testing Center This report only responds to the tested sample and may not be reproduced, except in full, without written approval of the HCT Co., Ltd. This test results were applied only to the test methods required by the standard. This laboratory is not accredited for the test results marked *. The above Test Report is the accredited test result by KOLAS(Korea Laboratory Accreditation Scheme), which signed the ILAC-MRA. (HCT Accreditation No.: KT197) F-TP22-03 (Rev.00)2 / 33 HCT CO., LTD. R eport No.: HCT-RF-2006-FC012 FCC ID: A3LSMA516U F-TP22-03 (Rev.00) 3 / 33 HCT CO.,LTD. Version TEST REPORT NO. DATE DESCRIPTION HCT-RF-2006-FC012 June 26, 2020 - First Approval Report R eport No.: HCT-RF-2006-FC012 FCC ID: A3LSMA516U F-TP22-03 (Rev.00) 4 / 33 HCT CO.,LTD. Table of Contents REVIEWED BY .................................................................................................................................................. 2 1. EUT DESCRIPTION ...................................................................................................................................... 5 2. TEST METHODOLOGY ................................................................................................................................ 6 EUT CONFIGURATION ............................................................................................................................. 6 EUT EXERCISE ......................................................................................................................................... 6 GENERAL TEST PROCEDURES ............................................................................................................. 6 DESCRIPTION OF TEST MODES ............................................................................................................ 6 3. INSTRUMENT CALIBRATION...................................................................................................................... 7 4. FACILITIES AND ACCREDITATIONS .......................................................................................................... 7 FACILITIES ................................................................................................................................................ 7 EQUIPMENT .............................................................................................................................................. 7 5. ANTENNA REQUIREMENTS ....................................................................................................................... 7 6. MEASUREMENT UNCERTAINTY ................................................................................................................ 8 7. DESCRIPTION OF TESTS............................................................................................................................ 9 8. TEST SUMMARY ........................................................................................................................................ 17 9. TEST RESULT ............................................................................................................................................ 18 9.1. Operation within the band 13.110 MHz – 14.010 MHz .................................................................. 18 9.2. Radiated Emission 9 kHz – 30 MHz ............................................................................................... 20 9.3. Radiated Emission 30 MHz – 1000 MHz ........................................................................................ 21 9.4. 20 dB Bandwidth ............................................................................................................................. 22 9.5. Frequency Stability ......................................................................................................................... 23 9.6. POWERLINE CONDUCTE EMISSIONS .......................................................................................... 27 10. LIST OF TEST EQUIPMENT .................................................................................................................... 31 11. ANNEX A_ TEST SETUP PHOTO ............................................................................................................ 33 R eport No.: HCT-RF-2006-FC012 FCC ID: A3LSMA516U F-TP22-03 (Rev.00) 5 / 33 HCT CO.,LTD. 1. EUT DESCRIPTION Model SM-A516U Additional…

Text truncated - open the document above for the full version.