A3LSME500FMobile Phone

User manual SM-E500F/DS Draft 6.1 2 014-12-08 O nly for Approval using this manual This user manual has been specially designed to guide you through the functions and features of your mobile phone. To get started quickly, refer to “introducing your mobile phone, Instructional icons Before you start, familiarise yourself with the icons you will see in this manual: Warning—situations that could cause injury to yourself or others Caution—situations that could cause damage to your phone or other equipment Note—notes, usage tips, or additional information Refer to —pages with related information; for example: p. 12 (represents “see page 12”) Õ Followed by —the order of options or menus you must select to perform a step; for example: In Menu mode, select Messages Õ Create new message (represents Messages, followed by Create new message) [ ] Square brackets—phone keys; for example: [ ](represents the Power/ Menu exit key) < > Angled brackets—softkeys that control different functions at each screen; for example: <OK> (represents the OK softkey) Copyright information Rights to all technologies and products that comprise this device are the property of their respective owners:  Bluetooth ® is a registered trademark of the Bluetooth SIG, Inc. worldwide  Java™ is a trademark of Sun Microsystems, Inc.  Windows Media Player ® is a registered trademark of Microsoft Corporation. contents safety and usage information Safety warnings Safety precautions Important usage information introducing your mobile phone Unpack .. Phone layout Keys Display Icons assembling and preparing your mobile phone Install the SIM card and battery Charge the battery using basic functions Turn your phone on and off Access menus Customise your phone Use basic call functions Send and view messages Add and find contacts troubleshooting safety and usage information Comply with the following precautions to avoid dangerous or illegal situations and ensure peak performance of your mobile phone. Safety warnings Keep your phone away from small children and pets Keep your phone and all accessories out of the reach of small children or animals. Small parts may cause choking or serious injury if swallowed. Protect your hearing Excessive exposure to sound at high volumes can cause hearing damage. Always turn the volume down before plugging the earphones into an audio source and use only the minimum volume setting necessary to hear your conversation or music. Install mobile phones and equipment with caution Ensure that any mobile phones or related equipment installed in your vehicle are securely mounted. Avoid placing your phone and accessories near or in an air bag deployment area. Improperly installed wireless equipment can cause serious injury when air bags inflate rapidly. Handle and dispose of batteries and chargers with care  Use only Samsung-approved batteries and chargers specifically designed for your phone. Incompatible batteries and chargers can cause serious injuries or damage to your phone.  Never dispose of batteries or phones in a fire. Follow all local regulations when disposing used batteries or phones.  Never place batteries or phones on or in heating devices, such as microwave ovens, stoves, or radiators. Batteries may explode when overheated.  Never crush or puncture the battery. Avoid exposing the battery to high external pressure, which can lead to an internal short circuit and overheating. Avoid interference with pacemakers Maintain a minimum of 15 cm (6 inches) between mobile phones and pacemakers to avoid potential interference, as recommended by manufacturers and the independent research group, Wireless Technology Research. If you have any reason to suspect that your phone is interfering with a pacemaker or other medical device, turn off the phone immediately and contact the manufacturer of the pacemaker or medical device for guidance. Turn off the phone in potentially explosive environments Do not use your phone at refuelling points (service stations) or near fuels or chemicals. Turn off your phone whenever directed by warning signs or instructions. Your phone could cause explosions or fire in and around fuel or chemical storage and transfer areas or blasting areas. Do not store or carry flammable liquids, gases, or explosive materials in the same compartment as the phone, its parts, or accessories. Reduce the risk of repetitive motion injuries When sending text messages or playing games on your phone, hold the phone with a relaxed grip, press the keys lightly, use special features that reduce the number of keys you have to press (such as templates and predictive text), and take frequent breaks. Safety precautions Drive safely at all times Avoid using your phone while driving and obey all regulations that restrict the use of mobile phones while driving. Use hands-free accessories to increase your safety when possible. Follow all safety warnings and regulations Comply with any regulations that restrict the use of a mobile phone in a certain area. Use only Samsung-approved accessories Using incompatible accessories may damage your phone or cause injury. Turn off the phone near medical equipment Your phone can interfere with medical equipment in hospitals or health care facilities. Follow all regulations, posted warnings, and directions from medical personnel. Turn off the phone or disable the wireless functions when in an aircraft Your phone can cause interference with aircraft equipment. Follow all airline regulations and turn off your phone or switch to a mode that disables the wireless functions when directed by airline personnel. Protect batteries and chargers from damage Avoid exposing batteries to very cold or very hot temperatures (below 0° C/32° F or above 45° C/ 113° F). Extreme temperatures can reduce the charging capacity and life of your batteries. Prevent batteries from contacting metal objects, as this can create a connection between the + and - terminals of your batteries and lead to temporary or…

Text truncated - open the document above for the full version.

Date: July 23, 2014 UL Verification Services Inc. 47173 Benicia Street Fremont, CA 94538, USA To whom it may concern: I, the undersigned, hereby authorize UL Verification Services Inc. to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by UL Verification Services Inc. on our behalf shall have the same effect as acts of our own. I, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). In authorizing UL Verification Services Inc. as our representative, we still recognize that we are responsible to: comply with the relevant provisions of the certification program; a) make all necessary arrangements for the conduct of the evaluation, including provision for examining documentation and access to all areas, records (including internal audit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment, surveillance, reassessment) and resolution of complaints; b) make claims regarding certification only in respect of the scope for which certification has been granted; c) do not use our product certification in such a manner as to bring the Certification Division into disrepute and not make any statement regarding our product certification which the Certification Division may consider misleading or unauthorized; d) upon suspension or cancellation of certification, discontinue use of all advertising matter that contains any reference thereto and return any certification documents as required by the Certification Division; e) use certification only to indicate the products are certified as being in conformity with specified standards; f) endeavor to ensure that no certificate or report nor any part thereof is used in a misleading manner; g) ensure that any reference to our product certification in communication media such as documents, brochures or advertising, complies with the requirements of the Certification Division; h) keep a record of all complaints made known to the us relating to the product’s compliance with requirements of the relevant standard and to make these records available to the when requested; i) take appropriate action with respect to such complaints and any deficiencies found in products or services that affect compliance with the requirements for certification; j) document the actions taken. This authorization is valid until further written notice from the applicant. Sincerely Yours, CHANHO, YOUN General Manager Samsung Electronics CO. LTD TEL: +1-973-808-6362 E-mail: [email protected]

December 19, 2014 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Subject: Request for Confidentiality FCC ID: A3LSME500 F To Whom It May Concern: Pursuant to the provisions of Sections 0.457 and 0.459 of the Commission’s rules (47 CFR §§ 0.457, 0.459), we are requesting the Commission to withhold the following attachments as confidential document from public disclosure indefinitely. Schematics Block Diagram Operational Description Antenna Specification Parts List Tune-Up Procedure Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In additional to above mentioned documents, pursuant to Public Notice DA 04-1705 of the Commission’s policy, in order to comply with the marketing regulations in 47 CFR §2.803 and the importation rules in 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We are requesting the commission to grant short-term confidentiality request on the following attachments until 180 days External Photos Internal Photos Test Setup Photos User Manual It is our understanding that all measurement test reports, FCC ID label format and correspondence during certification review process cannot be granted as confidential documents and such information will be available for public review once the grant of equipment authorization is issued. Best Regards Sincerely, CHANHO, YOUN General Manager Samsung Electronics CO. LTD TEL: +1-973-808-6362 E-mail: [email protected]

Label and Location Model: SM-E500F/DS FCC ID: A3LSME500F Label: Location: Top Back of device Bottom Phone: Label is placed on rear of device Tablet : FCC ID is engraved on bottom of the device Label ָ֦ [˽̘ࣵ/̊ʵࢆऋ1]: Phone/Tablet ߾ҬԂଥкیତփΧ̛ˈΟ֞एۍࢿ 5.1mm 7.1mm МODEL:SM-E500F/DS FCC ID:A3LSME500F RATED:5V ; 1550mA MADE IN VIETNAM BY SAMSUNG IMEI:333333/44/000666/1 IMEI:333333/44/000666/1 S/N:4A67LP85K5Q

FCC I D: A3LSME500FIssue Date: Dec. 18, 2014 Report No. HCT CO., LTD. 74, Seoicheon-ro 578 beon-gil, Majang-myeon, Icheon-si, Gyeonggi-do, Korea 467-811 2 of 129 HCT-A-1412-F002-1 TEL: +82 31 645 6300 FAX: +82 31 645 6401 Version Rev . DATE DESCRIPTION HCT-A-1412-F002 Dec. 11, 2014 First Approval Report HCT-A-1412-F002-1 Dec. 18, 2014 Sec. 3.1 was revised (Typo) Sec. 12.1 was revised (Add the diagonal dimension.) Sec.13.3-1 was revised. (Revise BT Tune-up limit, Scaling factor and Scaled SAR value) Sec. 15.2 was revised. (Revise BT Scaled SAR and Summation SAR value) FCC ID: A3LSME500F Issue Date: Dec. 18, 2014 Report No. HCT CO., LTD. 74, Seoicheon-ro 578 beon-gil, Majang-myeon, Icheon-si, Gyeonggi-do, Korea 467-811 3 of 129 HCT-A-1412-F002-1 TEL: +82 31 645 6300 FAX: +82 31 645 6401 Table of Contents 1. INTRODUCTION .......................................................................................................................................... 2. TEST METHODOLOGY ............................................................................................................................... 3. DESCRIPTION OF DEVICE ......................................................................................................................... 4. DESCRIPTION OF TEST EQUIPMENT ...................................................................................................... 5. SAR MEASUREMENT PROCEDURE ..................................................................................................... 6. DESCRIPTION OF TEST POSITION ....................................................................................................... 7. MEASUREMENT UNCERTAINTY ........................................................................................................... 8. ANSI/ IEEE C95.1 - 1992 RF EXPOSURE LIMITS .................................................................................. 9. SAR SYSTEM VALIDATION ..................................................................................................................... 10. SYSTEM VERIFICATION ....................................................................................................................... 11. RF CONDUCTED POWER MEASUREMENT ....................................................................................... 11.7 SAR Test Exclusions Applied ................................................................................................................ 12. SAR Test configuration & Antenna Information ...................................................................................... 13. SAR TEST DATA SUMMARY ................................................................................................................. 13.1-1 Measurement Results (GSM850 Head SAR) ............................................................................ 13.1-2 Measurement Results (GSM1900 Head SAR) .......................................................................... 13.1-3 Measurement Results (WCDMA850 Head SAR) ....................................................................... 13.1-4 Measurement Results (WCDMA1900 Head SAR) ..................................................................... 13.1-5 Measurement Results (LTE Band 5 10MHz Head SAR) ........................................................... 13.1-6 Measurement Results (DTS Head SAR) ................................................................................... 13.2-1 Measurement Results (GSM850 Hotspot SAR) ......................................................................... 13.2-2 Measurement Results (GSM1900 Hotspot SAR) ....................................................................... 13.2-3 Measurement Results (WCDMA850 Hotspot SAR) ................................................................... 13.2-4 Measurement Results (WCDMA1900 Hotspot SAR) ................................................................. 13.2-5 Measurement Results (LTE Band 5 10MHz Hotspot SAR) ....................................................... 13.2-6 Measurement Results (WLAN Hotspot SAR) ............................................................................ 13.3-1 Measurement Results (Body-worn SAR) ................................................................................... 13.4 SAR Test Notes ............................................................................................................................. 14. SAR Measurement Variability and Uncertainty ...................................................................................... 15. SAR Summation Scenario ...................................................................................................................... 16. CONCLUSION ........................................................................................................................................ 17. REFERENCES ....................................................................................................................................... Attachment 1. – SAR Test Plots ................................................................................................................... Attachment 2. – Dipole Verification Plots...................................................................................................... Attachment 3. – Probe Calibration Data ....................................................................................................... Attachment 4. – Dipole Calibration Data ................................................................................................... FCC ID: A3LSME500F Issue Date: Dec. 18, 2014 Report No. HCT CO., LTD. 74, Seoicheon-ro 578 beon-gil, Majang-myeon, Icheon-si, Gyeonggi-do, Korea 467-811 4 of 129 HCT-A-1412-F002-1 TEL: +82 31 645 6300 FAX: +82 31 645 6401 1. INTRODUCTION The FCC has adopted the guidelines for evaluating the environmental effects of radio frequency radiation in ET Docket 93-62 on Aug. …

Text truncated - open the document above for the full version.

Report No.: HCT-R-1412-F006 Model: SM-E500F/DS Page 2 of 51 Version TEST REPORT NO. DATE DESCRIPTION HCT-R-1412-F006 December 12,2014 - First Approval Report F-01P-02-014 (Rev.00) FCC ID: A3LSME500F HCT CO.,LTD. Report No.: HCT-R-1412-F006 Model: SM-E500F/DS Page 3 of 51 Table of Contents 1. GENERAL INFORMATION ........................................................................................................................... 4 2. EUT DESCRIPTION ...................................................................................................................................... 4 3. TEST METHODOLOGY ................................................................................................................................ 5 3.1 EUT CONFIGURATION ....................................................................................................................... 5 3.2 EUT EXERCISE ................................................................................................................................... 5 3.3 GENERAL TEST PROCEDURES ....................................................................................................... 5 3.4 DESCRIPTION OF TEST MODES ...................................................................................................... 5 4. INSTRUMENT CALIBRATION...................................................................................................................... 6 5. FACILITIES AND ACCREDITATIONS .......................................................................................................... 6 5.1 FACILITIES .......................................................................................................................................... 6 5.2 EQUIPMENT ........................................................................................................................................ 6 6. ANTENNA REQUIREMENTS ....................................................................................................................... 6 7. SUMMARY TEST OF RESULTS .................................................................................................................. 7 8. TEST RESULT .............................................................................................................................................. 8 8.1 DUTY CYCLE ....................................................................................................................................... 8 8.2 6dB BANDWIDTH MEASUREMENT .................................................................................................. 9 8.3 OUTPUT POWER MEASUREMENT ................................................................................................. 12 8.4 POWER SPECTRAL DENSITY ......................................................................................................... 19 8.5 OUT OF BAND EMISSIONS AT THE BAND EDGE/ CONDUCTED SPURIOUS EMISSIONS ...... 23 8.6 RADIATED MEASUREMENT. ........................................................................................................... 34 8.6.1 RADIATED SPURIOUS EMISSIONS. ..................................................................................... 34 8.6.2 RADIATED RESTRICTED BAND EDGES ............................................................................. 43 8.7 POWERLINE CONDUCTED EMISSIONS ........................................................................................ 45 9. LIST OF TEST EQUIPMENT ...................................................................................................................... 50 9.1 LIST OF TEST EQUIPMENT(Conducted Test) ............................................................................... 50 9.2 LIST OF TEST EQUIPMENT(Radiated Test) ................................................................................... 51 F-01P-02-014 (Rev.00) FCC ID: A3LSME500F HCT CO.,LTD. Report No.: HCT-R-1412-F006 Model: SM-E500F/DS Page 4 of 51 1. GENERAL INFORMATION Applicant: SAMSUNG Electronics Co., Ltd. Address: 129, Samsung-ro, Yeongtong-gu Suwon-si, Gyeonggi-do, 443-742 Rep. of Korea FCC ID: A3LSME500F EUT Type: Mobile Phone Model name(s): Additional Model name(s): SM-E500F/DS SM-E500F Date(s) of Tests: December 01, 2014 ~ December 10, 2014 Place of Tests: HCT Co., Ltd. 74, Seoicheon-ro 578beon-gil, Majang-myeon, Icheon-si, Gyeonggi-do, Korea (IC Recognition No. : 5944A-3) 2. EUT DESCRIPTION FCC Model Name SM-E500F/DS Additional Model Name SM-E500F EUT Type Mobile Phone Power Supply DC 3.8 V Battery type Li-ion Battery(Standard) Frequency Range TX: 2402 MHz ~ 2480 MHz RX: 2402 MHz ~ 2480 MHz Max. RF Output Power Peak 1.138dBm (1.300 mW) Average 0.800 dBm (1.202 mW) BT Operating Mode BT 4.0_Low Energy Mode Modulation Type GFSK Number of Channels 40 Channels Antenna Specification Manufacturer: ethertronics Antenna type: Internal Antenna Peak Gain : -0.6 dBi F-01P-02-014 (Rev.00) FCC ID: A3LSME500F HCT CO.,LTD. Report No.: HCT-R-1412-F006 Model: SM-E500F/DS Page 5 of 51 3. TEST METHODOLOGY FCC KDB 558074 D01 DTS Meas Guidance v03r02 dated June 05, 2014 entitled “Guidance for Performing Compliance Measurements on Digital Transmission Systems(DTS) and the measurement procedure described in the American National Standard for Testing Unlicensed Wireless Devices(ANSI C63.4-2003) Operating Under §15.247” were used in the measurement. 3.1 EUT CONFIGURATION The EUT configuration for testing is installed on RF field strength measurement to meet the Commissions requirement and operating in a manner that intends to maximize its emission characteristics in a continuous normal application. 3.2 EUT EXERCISE The EUT was operated in the engineering mode to fix the Tx frequency that was for the purpose of the measurements. According to its specifications, the EUT must comply with the requirements of the Section 15.207, 15.209 and 15.247 under the FCC Rules Part 15 Subpart C. 3.3 GENERAL TEST PROCEDURES Condu…

Text truncated - open the document above for the full version.

Report No.: HCT-R-1412-F008 Model: SM-E500F/DS Page 2 of 59 Version TEST REPORT NO. DATE DESCRIPTION HCT-R-1412-F008 December 12,2014 - First Approval Report F-01P-02-014 (Rev.00) FCC ID: A3LSME500F HCT CO.,LTD. Report No.: HCT-R-1412-F008 Model: SM-E500F/DS Page 3 of 59 Table of Contents 1. GENERAL INFORMATION ........................................................................................................................... 4 2. EUT DESCRIPTION ...................................................................................................................................... 4 3. TEST METHODOLOGY ................................................................................................................................ 5 3.1 EUT CONFIGURATION ....................................................................................................................... 5 3.2 EUT EXERCISE ................................................................................................................................... 5 3.3 GENERAL TEST PROCEDURES ....................................................................................................... 5 3.4 DESCRIPTION OF TEST MODES ...................................................................................................... 5 4. INSTRUMENT CALIBRATION...................................................................................................................... 6 5. FACILITIES AND ACCREDITATIONS .......................................................................................................... 6 5.1 FACILITIES .......................................................................................................................................... 6 5.2 EQUIPMENT ........................................................................................................................................ 6 6. ANTENNA REQUIREMENTS ....................................................................................................................... 7 7. SUMMARY TEST OF RESULTS .................................................................................................................. 8 8. TEST RESULT .............................................................................................................................................. 9 8.1 DUTY CYCLE ....................................................................................................................................... 9 8.2 6dB BANDWIDTH (802.11b/g/n) ....................................................................................................... 11 8.3 OUTPUT POWER (802.11b/g/n) ....................................................................................................... 15 8.4 POWER SPECTRAL DENSITY (802.11b/g/n) .................................................................................. 22 8.5 OUT OF BAND EMISSIONS AT THE BAND EDGE/ CONDUCTED SPURIOUS EMISSIONS ...... 26 8.6 RADIATED MEASUREMENT. ........................................................................................................... 39 8.6.1 RADIATED SPURIOUS EMISSIONS. ..................................................................................... 39 8.6.2 RADIATED RESTRICTED BAND EDGES ............................................................................. 51 8.7 POWERLINE CONDUCTED EMISSIONS ........................................................................................ 53 9. LIST OF TEST EQUIPMENT ...................................................................................................................... 58 9.1 LIST OF TEST EQUIPMENT(Conducted Test) ............................................................................... 58 9.2 LIST OF TEST EQUIPMENT(Radiated Test) ................................................................................... 59 F-01P-02-014 (Rev.00) FCC ID: A3LSME500F HCT CO.,LTD. Report No.: HCT-R-1412-F008 Model: SM-E500F/DS Page 4 of 59 1. GENERAL INFORMATION Applicant: SAMSUNG Electronics Co., Ltd. Address: 129, Samsung-ro, Yeongtong-gu Suwon-si, Gyeonggi-do, 443-742 Rep. of Korea FCC ID: A3LSME500F EUT Type: Mobile Phone Model name(s): Additional Model name(s): SM-E500F/DS SM-E500F Date(s) of Tests: December 01, 2014 ~ December 10, 2014 Place of Tests: HCT Co., Ltd. 74, Seoicheon-ro 578beon-gil, Majang-myeon, Icheon-si, Gyeonggi-do, Korea (IC Recognition No. : 5944A-3) 2. EUT DESCRIPTION FCC Model Name SM-E500F/DS Additional Model Name SM-E500F EUT Type Mobile Phone Power Supply DC 3.8 V Battery type Li-ion Battery(Standard) Frequency Range TX: 2412 MHz ~ 2462 MHz RX: 2412 MHz ~ 2462 MHz Max. RF Output Power Peak Wi-Fi 802.11b(22.74 dBm) / Wi-Fi 802.11g (21.49dBm) / Wi-Fi 802.11n (19.98 dBm) Average Wi-Fi 802.11b (16.81 dBm) / Wi-Fi 802.11g (12.89 dBm) / Wi-Fi 802.11n (11.87 dBm) Modulation Type DSSS/CCK(802.11b), OFDM(802.11g, 802.11n) Antenna Specification Manufacturer: ethertronics Antenna type: Internal Antenna Peak Gain : -0.6 dBi F-01P-02-014 (Rev.00) FCC ID: A3LSME500F HCT CO.,LTD. Report No.: HCT-R-1412-F008 Model: SM-E500F/DS Page 5 of 59 3. TEST METHODOLOGY FCC KDB 558074 D01 DTS Meas Guidance v03r02 dated June 05, 2014 entitled “Guidance for Performing Compliance Measurements on Digital Transmission Systems(DTS) and the measurement procedure described in the American National Standard for Testing Unlicensed Wireless Devices(ANSI C63.4-2003) Operating Under §15.247” were used in the measurement. 3.1 EUT CONFIGURATION The EUT configuration for testing is installed on RF field strength measurement to meet the Commissions requirement and operating in a manner that intends to maximize its emission characteristics in a continuous normal application. 3.2 EUT EXERCISE The EUT was operated in the engineering mode to fix the Tx frequency that was for the purpose of the measurements. According to its specifications, the EUT must comply with the requirements of the Section 15.20…

Text truncated - open the document above for the full version.

FCC ID: A3LSME500F Issue Date: Dec. 11, 2014 Report No. HCT CO., LTD. 74, Seoicheon-ro 578 beon-gil, Majang-myeon, Icheon-si, Gyeonggi-do, Korea 467-811 1 of 12 HC T-A-1412-F002 TEL: +82 31 645 6300 FAX: +82 31 645 6401 SAR Test Setup Photographs FCC ID: A3LSME500F Issue Date: Dec. 11, 2014 Report No. HCT CO., LTD. 74, Seoicheon-ro 578 beon-gil, Majang-myeon, Icheon-si, Gyeonggi-do, Korea 467-811 2 of 12 HC T-A-1412-F002 TEL: +82 31 645 6300 FAX: +82 31 645 6401  Test Setup Photo FCC ID: A3LSME500F Issue Date: Dec. 11, 2014 Report No. HCT CO., LTD. 74, Seoicheon-ro 578 beon-gil, Majang-myeon, Icheon-si, Gyeonggi-do, Korea 467-811 3 of 12 HC T-A-1412-F002 TEL: +82 31 645 6300 FAX: +82 31 645 6401  Test Setup Photo FCC ID: A3LSME500F Issue Date: Dec. 11, 2014 Report No. HCT CO., LTD. 74, Seoicheon-ro 578 beon-gil, Majang-myeon, Icheon-si, Gyeonggi-do, Korea 467-811 4 of 12 HC T-A-1412-F002 TEL: +82 31 645 6300 FAX: +82 31 645 6401  Test Setup Photo FCC ID: A3LSME500F Issue Date: Dec. 11, 2014 Report No. HCT CO., LTD. 74, Seoicheon-ro 578 beon-gil, Majang-myeon, Icheon-si, Gyeonggi-do,…

Text truncated - open the document above for the full version.