A3LSMF721JPNPortable Handset

Quick Reference Guide (Terms an d Conditions) SC-54C SCG17 Read this document before operating the mobile device, accessories, or software (defined collectively and individually as the “Product”) and keep it for future reference. This document contains important Terms and Conditions. Electronic acceptance, opening the packaging, use, or retention of the Product constitutes acceptance of these Terms and Conditions. Visit www.samsung.com/us to view device information, the user manual, and more. You may incur additional charges for accessing the Internet. Device Layout To turn on the device, pr ess and hold th e Side key for a few seconds. The charger should remain close to the electric socket and easily accessible while charging. Installing a nano-SIM card Nano- SIM cards are sold separately. Contact us Questions? Visit us.community.samsung.com Get Support Call 1.800.SAMSUNG Service locations Find a service location near you at Samsung.com/us/support/service/locations Switching made simple Whether you are coming from an iOS or Android platform, you can easily transfer your data with Smart Switch. Back up your old phone Back up your old phone using your favorite back-up app. Samsung Smart Switch 1. From your new Galaxy device, tap Settings > Accounts and backup > Smart Switch. 2. Tap Receive data. 3. Select your old device type. 4. Tap Cable (Android) or Wireless (Android and iOS) and follow the prompts to connect your phones. Customize Tap Settings to personalize your phone. Flight mode This disables all wireless functions on your devic e. You can use only non- network services On the setting screen, tap Flight mode. NOTE: The use of mobile devices on an aircraft or a ship may be subject to federal and local guidelines and restrictions. Check with appropriate author and always follow crew instructions regarding when and how you may use your device. Important l egal information Arbitration Agreement - This Product is subject to a binding arbit ration agreement between you and SAMSUNG ELECTRONICS AMERICA, INC. (“Samsung”). You can opt out of t he agreement within 30 calendar days of the first consumer purchase by emailing [email protected] or calling 1-800-SAMSUNG (726-7864) and providing the applicable information. The full Arbitration Agreement, Standard One-year Limited Warranty, End User License Agreement (EU LA), and Health & Safety Information for your device are available online: •English: www.samsung.com/us/Legal/Phone-HSGuide •Spanish: www.samsung.com/us/Legal/Phone-HSGuide-SP This information can also be found on the device in the “About device” or “About phone” or “About tablet” section, for example: •Settings > About phone or About device or About tablet > Legal information > Samsung legal •Or,Search “Legal” If your device required Federal Communications Commission (FCC) approval, you can view the FCC certification by opening Settings > A bout phone or About device or About tablet> Status Information. Health and Safety WARNING! To avoid electri c shock and damage to your device, do not charge device while it is wet or in an area where it co uld get wet. Do not handle device, c harger or cords with wet hands while charging. Maint aining dust and water resistance The device is not impervious to dust and water damage in any situation. It is important that all c ompartments are closed tightly. Follow these tips carefully to prevent damage to the device and maintain dust and water resistance performance: •Water resistant based on IP68 rating, which tests submersion in fresh water deeper than 1.5 meters or keep it submerged for more than 30 minutes. If device is exposed to fresh water, dry it thoroughly with a clean, soft cloth; if exposed to liquid other than fresh water, rinse with fresh water and dry as directed. •Any device which uses accessible compar tments or por ts that can be opened should have these se aled or closed tightly to prevent liquid from entering th e system. •If the device has been immersed i n water or the microphone or speaker is wet, sound may not be heard clearly during a call. After wiping the device with a dry cloth, dry it thoroughly before using it. •Do not expose the device to water at high pressure. •If the device is dropped or receives an impact, the water and dust resistant features of the device may be damaged. Note: Liquid other than fresh water may enter the device fa ster. Failure to rinse the device in fresh water and dry it as instructed may cause the device to suffer from operability or cosmetic issues. Samsung Knox Samsung Knox is Samsung’s security platf orm. Additional licensing fees may be required for enterprise use. For more information about Knox, pl ease refer to: www.samsung.com/us/knox Specific Absorption Rate (SAR) certification information For information about SAR, visit : •https://www.fcc.gov/general/radio-frequency-safety-0 •www.fcc.gov/encyclopedia/ specifi c-absorption-rate-sar-cellular-telephones •www.samsung.com/sar Body-worn operations are restricted to belt-clips, ho lsters or similar accessories that have no metallic component in the assembly and must provide at least 1.5cm separation between the device and the user's body. Samsung Wireless Power Sharing feature allows device -to -device c harging without the need for a charger. If your device supports the wireless power sharing function, this equipment should be operated with a minimum distance of 20 cm between the device and your body. Note: Foldable devices can be stored in an environment with ambient temperatures of -10°C / 14.0°F to 50°C / 122°F safely; prolonged exposure to temperatures outside these recommended temperatures can pose a high risk of damage to the device. Samsung mobile products and recycling WARNING! Never dispose of batteries in a fire because they may explode. Do not disassemble, crush, puncture, heat, burn or reuse. F or battery and cell phone recycling, go to call2re cycle. org or call 1- 800-822-8837. F or more recycling information, go to our…

Text truncated - open the document above for the full version.

Samsung Electronics America, Inc 19 Chapin Rd, Building D. Pine Brook, NJ 07058 Date: July 22, 2022 FCC ID: A3LSMF721JPN To whom it may concern: We, the undersigned, hereby authorize Element Washington DC LLC, to act on our behalf in all matters relating to applications for equipment authorization, including the signing of all documents relating to these matters. Any and all acts carried out by Element Washington DC LLC. on our behalf shall have the same effect as acts of our own. We also hereby certify that no party to any application is subject to a denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S. C. 862. Sincerely, Jenni Chun / General Manager Samsung Electronics America, Inc. Address: 19 Chapin Rd., Building D Pine Brook, NJ 07058 Tel: 1-973-808-6375

SAMSUNG ELECTRONICS CO., LTD 129, Samsung-ro, Yeongtong-gu Suwon-si, Gyeonggi-do, 443-742 Korea June 22 nd , 2022 Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 SUBJECT : Label Statement FCC ID : A3LSMF721JPN To whom it may concern We hereby provide the following attestations according to CFR 2.935 and FCC KDB 784748 D02: At the time of purchase, the FCC ID is readily and physically visible to the purchaser on the exterior package per CFR 2.935(f). The FCC ID will be readily legible without the aid of magnification according to CFR 2.935(d). The literature in the package describes how to access the electronic display to find the FCC ID per CRF 2.935(b) and FCC KDB 784748. Per CFR 2.935(c), the user will be able to access this information within a maximum of 3 steps. The user will be able to access this information without a SIM card, special accessories or supplemental plug-ins. Per CFR 2.935(e), We, Samsung have programmed the e-label and it is not able to be modified by any third party. Per CFR 2.935(f), the FCC ID will be able to survive normal shipping and handling so it is visible for inspection at the time of import. Should you have any questions or comments concerning the above, please contact the undersigned. Sincerely Yours, Jenni Chun / General Manager Samsung Electronics America, Inc. Address: 19 Chapin Rd., Building D Pine Brook, NJ 07058 Tel: 1-973-808-6375

SAMSUNG ELECTRONICS AMERICA, INC. American QA Lab 19 Chapin Rd, Building D. Pine Brook, NJ 07058 Date: July 22, 2022 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road, Columbia, MD 21046 RE:Request of Confidentiality for FCC ID: A3LSMF721JPN To Whom It May Concern: Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules (CFR 47), and Section 552 (b) (4) of the Freedom of Information Act, SAMSUNG ELECTRONICS CO.,LTD. hereby requests confidentiality and treatment of certain information accompanying this application. The materials contain trade secrets and proprietary information not customarily re leased to th e public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. We are also hereby request Short-Term Confidentiality for 180 days after the grant as outlined in Public Notice DA 04-1705. This provision will give SAMSUNG ELECTRONICS CO.,LTD. temporary confidentiality of commercially sensitive information prior to product release. The requested Permanent and Short-Term Confidential exhibits are listed as follows: PERMANENT AND SHORT-TERM CONFIDENTIAL LIST ExhibitDescription PERMANENT 1 Block Diagram 2 Operational Description SHORT-TERM 3 External Photos 4 Internal Photos 5 Test-Setup Photos 6 Users Manual The Applicant understands that pursuant to Rule 0.457, disclosure of this application and all accompanying documentations, where applicable, will not be made public before the date of the Grant for this application. Sincerely, Jenni Chun / General Manager Samsung Electronics America, Inc. Address: 19 Chapin Rd., Building D Pine Brook, NJ 07058 Tel: 1-973-808-6375

FCC ID : A3LSMF721JPN External Photos FCC ID : A3LSMF721JPN External Photos FCC ID : A3LSMF721JPN External Photos FCC ID : A3LSMF721JPN External Photos FCC ID : A3LSMF721JPN External Photos FCC ID : A3LSMF721JPN External Photos FCC ID : A3LSMF721JPN External Photos FCC ID : A3LSMF721JPN External Photos FCC ID : A3LSMF721JPN External Photos FCC ID : A3LSMF721JPN External Photos FCC ID : A3LSMF721JPN External Photos FCC ID : A3LSMF721JPN External Photos

FCC certification FCC ID: A3LSMF721JPN Description of E-label on the A3LSMF721JPN Date : June 22 nd , 2022 FCC ID: A3LSMF721JPN This model is applied E-label, please find description of E-label below. 1.FCC ID (E-label): Settings > About Phone > Status Information <Device Display Screen> 2.FCC ID on the Quick Start Guide The FCC has granted an Equipment Authorization for this model device based on the compliance of all reported SAR levels with the FCC RF exposure guide lines. This device has a FCC ID number A3LSMF721JPN [Model Number: SC-54C, SCG17] and the specific SAR levels for this device can be found at the following. FCC website: www.fcc.gov/oet/ea/ The SAR information for this device can be found on Samsung’s website: www.samsung.com/sar Samsung Electronics Co., LTD. 129, Samsung-ro, Yeongtong-gu Suwon-City, Gyeonggi-do, 16677, Korea

FCC ID : A3LSMF721JPN Internal Photos FCC ID : A3LSMF721JPN Internal Photos FCC ID : A3LSMF721JPN Internal Photos FCC ID : A3LSMF721JPN Internal Photos FCC ID : A3LSMF721JPN Internal Photos FCC ID : A3LSMF721JPN Internal Photos FCC ID : A3LSMF721JPN Internal Photos FCC ID : A3LSMF721JPN Internal Photos FCC ID : A3LSMF721JPN Internal Photos FCC ID : A3LSMF721JPN Internal Photos FCC ID : A3LSMF721JPN Internal Photos FCC ID : A3LSMF721JPN Internal Photos FCC ID : A3LSMF721JPN Internal Photos FCC ID : A3LSMF721JPN Internal Photos

FCC ID : A3LSMF721JPN Internal Photos FCC ID : A3LSMF721JPN Internal Photos FCC ID : A3LSMF721JPN Internal Photos FCC ID : A3LSMF721JPN Internal Photos FCC ID : A3LSMF721JPN Internal Photos FCC ID : A3LSMF721JPN Internal Photos FCC ID : A3LSMF721JPN Internal Photos FCC ID : A3LSMF721JPN Internal Photos FCC ID : A3LSMF721JPN Internal Photos FCC ID : A3LSMF721JPN Internal Photos FCC ID : A3LSMF721JPN Internal Photos SAMSUNG CONFIDENTIAL FCC ID : A3LSMF721JPN Internal Photos SAMSUNG CONFIDENTIAL FCC ID : A3LSMF721JPN Internal Photos SAMSUNG CONFIDENTIAL FCC ID : A3LSMF721JPN Internal Photos

FCC ID: A3LSMF721JPN FCC URS (UNINTENTIONAL RADIATOR RF SOURCES) RF EXPOSURE EVALUATION Approved by: Technical Manager Document S/N: 1M2206140073-19.A3L DUT Type: Portable Handset Page 1 of 6 REV 1.0 Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from Element. If you have any questions about this or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact [email protected]. DUT Type: Portable Handset Application Type: Certification FCC Rule Part(s): 47 CFR §2.1093 Models: SC-54C, SCG17 Frequency Evaluated 3 kHz ~ 10 MHz 10 MHz ~ 6 GHz 6 GHz ~ 110 GHz SAR/RF Exposure Level < 0.01 W/kg 0.018 W/kg 0.316 W/m 2 Total Exposure Ratio < 10% (PASS) . I attest to the accuracy of data. All measurements reported herein were performed by me or were made under my supervision and are correct to the best of my knowledge and belief. I assume full responsibility for the completeness of these measurements and vouch for the qualifications of all persons taking them. Test results reported herein relate only to the item(s) tested. ELEMENT MATERIALS TECHNOLOGY (Formerly PCTEST) 7185 Oakland Mills Road, Columbia, MD 21046 USA Tel. +1.410.290.6652 / Fax +1.410.290.6654 http://www.element.com URS FCC TEST REPORT Applicant Name Date of Testing SAMSUNG ELECTRONICS CO., LTD. 07/26/22 – 07/28/22 #129 Samsung-Ro, Yeongtong-Gu Test Site/Location Suwon-Si, Gyeonggi-Do Element‚ Columbia‚ MD‚ USA 16677, Korea (Republic Of) Document Serial No: 1M2206140073-19.A3L FCC ID: A3LSMF721JPN APPLICANT: SAMSUNG ELECTRONICS CO.‚ LTD. FCC ID: A3LSMF721JPN FCC URS (UNINTENTIONAL RADIATOR RF SOURCES) RF EXPOSURE EVALUATION Approved by: Technical Manager Document S/N: 1M2206140073-19.A3L DUT Type: Portable Handset Page 2 of 6 REV 1.0 Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from Element. If you have any questions about this or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact [email protected]. TABLE OF CONTENTS 1. INTRODUCTION ............................................................................................................................................................... 3 2. DATA SUMMARY ............................................................................................................................................................. 5 APPENDIX A: SYSTEM VERIFICATION APPENDIX B: VERIFICATION PLOTS APPENDIX C: TEST PLOTS APPENDIX D: MEASUREMENT UNCERTAINTIES APPENDIX E: SAR TISSUE SPECIFICATION APPENDIX F: SAR SYSTEM VALIDATION APPENDIX G: TEST SETUP PHOTOGRAPHS APPENDIX H: CALIBRATION CERTIFICATES APPENDIX I: EQUIPMENT LIST FCC ID: A3LSMF721JPN FCC URS (UNINTENTIONAL RADIATOR RF SOURCES) RF EXPOSURE EVALUATION Approved by: Technical Manager Document S/N: 1M2206140073-19.A3L DUT Type: Portable Handset Page 3 of 6 REV 1.0 Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from Element. If you have any questions about this or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact [email protected]. 1. INTRODUCTION 1.1. Unintentional Radiator RF Sources (URS) 2. An unintentional radiator is defined in ANSI 63.4 as “A device that generates radio-frequency (RF) energy for use within the device or that sends RF signals by conduction to associate equipment via connecting wiring, but that is not intended to emit RF energy by radiation or induction.” 3. 4. Unintentional radiators shall be FCC authorized prior to the “initiation of marketing, pursuant to the procedures for certification or Supplier’s Declaration of Conformity (SDoC)” according to 47CFR 15.101. 5. 6. A digital device is defined in ANSI C63.4 as “an unintentional radiator (device or system) that uses digital techniques and generates and uses timing signals or pulses at a rate in excess of 9000 pulses (cycles) per second, inclusive of telephone equipment that uses digital techniques or any device or system that generates and uses radio-frequency (RF) energy for the purpose of performing data processing functions, such as electronic computations, operations, transformations, recording, filing, sorting, storage, retrieval, or transfer.” 7. 8. The FCC has adopted the guidelines for evaluating the environmental effects of radio frequency (RF) radiation in ET Docket 93-62 on Aug. 6, 1996 to protect the public and workers from the potential hazards of RF emissions due to FCC-regulated portable devices. 9. 10. Per the April 2022 TCB Workshop Unintentional Radiator Compliance Policy (page 33), “a conservative estimate of the total emission power (integrated over the spectrum, as required) shall be provided via well- supported documentation showing analytical/numerical models and/or measurements.” 11. 12. If the Total Exposure Ratio (TER) <= 10% of the FCC limit, no further evaluation for URS is needed. Otherwise, the term shall be added to the contribution of the intentional radiators in the RF Exposure evaluation of the product. 13. 1.2. URS Measurement Methodology To cover all unintentional radiations, three different near field exposure probes were used to capture the electromagnetic emission from a digital device. FCC ID: A3LSMF721JPN FCC URS (UNINTENTIONAL RADIATOR RF SOURCES) RF EXPOSURE EVALUATION Approved by: Technical Manager Document S/N: 1M2206140073-19.A3L DUT Type: Portable Handset Page 4 of 6 REV 1.0 Unless otherwise specified, no part of this report may be reproduced or utilized in any part, …

Text truncated - open the document above for the full version.

FCC ID: A3LSMF721JPN FCC URS (UNINTENTIONAL RADIATOR RF SOURCES) RF EXPOSURE EVALUATION Approved by: Technical Manager DUT Type: APPENDIX A: Page 1 of 3 Portable Handset © 2022 Element REV 1.0 04/06/2020 A P P E N D I X A : SYS TEM VERIFICATION A.1 MAGPy Test System Verification The system was verified to be within ±0.35 dB of the Peak H-field targets and ±0.32 dB of the psSAR (1g) targets on the calibration certificate according to the test system specification in the user’s manual and calibration facility recommendation. The deviation thresholds represent the expanded uncertainty for system performance checks using SPEAG’s WPT verification sources. The same spatial resolution and measurement region used in the source calibration was applied during the system check. The results from the verification are scaled based on the excitation current in the verification source during calibration. Therefore, the excitation current in the verification source is measured during the verification test. Then, the measured H-field and SAR values are scaled according to the following: Scaling factor for H-field = (current during calibration)/(current during verification) Scaling factor for SAR = [(current during calibration)/(current during verification)]^2 Table A.1-1 System Verification Results A.2 SAR Test System Verification Table A.2-1 Measured Tissue Properties The above measured tissue parameters were used in the DASY software. The DASY software was used to perform interpolation to determine the dielectric parameters at the SAR test device frequencies (per KDB Publication 865664 D01v01r04 and IEEE 1528-2013 6.6.1.2). The tissue parameters listed in the SAR test plots may slightly differ from the table above due to significant digit rounding in the software. The SAR measurement systems have implemented the SAR error compensation algorithms documented in IEC 62209-2 to automatically compensate the measured SAR results for deviations between the measured CalibrationVerification measured (raw) measured (scaled) target Deviation (dB) measured (raw) measured (scaled) target Deviation (dB) MAGPy4007/21/2022101220510.81320.86622682522510.024.213.713.94-0.26 Probe SN Source Current (A) Peak H-field (A/m) psSAR 1g avg. (mW/kg) Syst. Freq. (kHz) Date Source SN System Verification Calibrated for Tests Performed on: Tissue Type Tissue Temp During Calibration ( ̊C) Measured Frequency ( MHz ) Measured Conductivity, σ (S/m) Measured Dielectric Constant, ε TARGET Conductivity, σ (S/m) TARGET Dielectric Constant, ε % dev σ% dev ε 58006.290 46.2626.00048.200 4.83%-4.02% 58056.29446.2586.00648.193 4.80%-4.02% 58256.30346.2366.02948.166 4.54%-4.01% 58356.30946.2336.04248.130 4.42%-3.94% 58456.31446.1966.05448.110 4.29%-3.98% 58556.32046.1256.06648.093 4.19%-4.09% 58656.341 46.0646.07748.080 4.34%-4.19% 5875 6.36846.0076.08848.067 4.60%-4.29% 5885 6.397 45.967 6.10048.053 4.87%-4.34% 59056.42745.932 6.12248.027 4.98%-4.36% 5800 Body7/26/202220.5 FCC ID: A3LSMF721JPN FCC URS (UNINTENTIONAL RADIATOR RF SOURCES) RF EXPOSURE EVALUATION Approved by: Technical Manager DUT Type: APPENDIX A: Page 2 of 3 Portable Handset © 2022 Element REV 1.0 04/06/2020 and required tissue dielectric parameters for all frequencies. The test lab has verified that the required SAR error compensation algorithm has been correctly applied to only scale up the measured SAR, not downward. Prior to SAR assessment, the system is verified to ±10% of the SAR measurement on the reference dipole at the time of calibration by the calibration facility. Full system validation status and result summary can be found in Appendix F. Table A.2-2 System Verification Results Figure A-1 System Verification Setup Diagram Figure A-2 System Verification Setup Photo M5800 BODY7/26/202221.420.50.050105775513.58074.80071.600-4.28% 1 W Normalized SAR1g (W/kg) Deviation 1g (%) System Verification TARGET & MEASURED SAR System # Tissue Frequency ( MHz ) Tissue Type Date Amb. Temp (°C) Liquid Temp (°C) Input Power (W) Source SN Probe SN Measured SAR 1g (W/kg) 1 W Target SAR 1g (W/kg) FCC ID: A3LSMF721JPN FCC URS (UNINTENTIONAL RADIATOR RF SOURCES) RF EXPOSURE EVALUATION Approved by: Technical Manager DUT Type: APPENDIX A: Page 3 of 3 Portable Handset © 2022 Element REV 1.0 04/06/2020 A.3 Power Density Test System Verification The system was verified to be within ±0.66 dB of the power density targets on the calibration certificate according to the test system specification in the user’s manual and calibration facility recommendation. The 0.66 dB deviation threshold represents the expanded uncertainty for system performance checks using SPEAG’s mmWave verification sources. The same spatial resolution and measurement region used in the source calibration was applied during the system check. The measured power density distribution of verification source was also confirmed through visual inspection to have no noticeable differences, both spatially (shape) and numerically (level) from the distribution provided by the manufacturer, per November 2017 TCBC Workshop Notes. Figure A.3-1 System Verification Setup Photo Table A.3-1 10 GHz Verifications Note: A 10 mm distance spacing was used from the reference horn antenna aperture to the probe element. measuredtargetmeasuredtarget R10.007/27/20221004940786.147.8050.70-0.2648.1050.70-0.23 Normal psPD (W/m 2 over 4 cm 2 ) Deviation (dB) Total psPD (W/m 2 over 4 cm 2 ) Deviation (dB) System Verification Syst. Freq. (GHz) Date Source SN Probe SN Prad ( mW )

FCC ID: A3LSMF721JPN FCC URS (UNINTENTIONAL RADIATOR RF SOURCES) RF EXPOSURE EVALUATION Approved by: Technical Manager DUT Type: APPENDIX B: Page 1 of 4 Portable Handset © 2022 Element REV 1.0 04/06/2020 A P P E N D I X B : V E R I F I C A T I O N P L O T S FCC ID: A3LSMF721JPN FCC URS (UNINTENTIONAL RADIATOR RF SOURCES) RF EXPOSURE EVALUATION Approved by: Technical Manager DUT Type: APPENDIX B: Page 2 of 4 Portable Handset © 2022 Element REV 1.0 04/06/2020 FCC ID: A3LSMF721JPN FCC URS (UNINTENTIONAL RADIATOR RF SOURCES) RF EXPOSURE EVALUATION Approved by: Technical Manager DUT Type: APPENDIX B: Page 3 of 4 Portable Handset © 2022 Element REV 1.0 04/06/2020 ELEMENT DUT: Dipole 5800.0 MHz; Type: D5GHzV2 - SN1057 Communication System: UID: 0, CW; Frequency: 5800.0 MHz Medium: 5200-5800 Body; Medium parameters used: f = 5800.0 MHz; cond = 6.29 S/m; perm = 46.3; density = 1000 kg/m3 Phantom Section: Flat; Space: 10 mm Test Date: 07/26/2022; Ambient Temp: 21.4 0 C ; Tissue Temp: 20.5 0 C Probe: EX3DV4 - SN7551; ConvF:(4.04,4.04,4.04); Calibrated: 2021-10-26 Sensor-Surface: 1.4mm (VMS + 6p) Electronics: DAE4 Sn1449; Calibrated: 2021-09-15 Phantom: Twin-SAM V8.0 (Left); Serial: 1964 Measurement SW: DASY Module SAR V16.0.2.136 5800 MHz System Verification at 17 dBm (50 mW) Area Scan (40.0 x 80.0): Measurement grid: dx=10.0 mm, dy=10.0 mm Zoom Scan (22.0 x 22.0 x 22.0): Measurement grid: dx=4.0 mm, dy=4.0 mm, dz=1.4 mm; Graded Ratio: 1.4 Peak SAR (extrapolated) = 14.4 W/kg SAR(1 g) = 3.58 W/kg; SAR(10 g) = 1.01 W/kg Deviation (1 g) = -4.28% FCC ID: A3LSMF721JPN FCC URS (UNINTENTIONAL RADIATOR RF SOURCES) RF EXPOSURE EVALUATION Approved by: Technical Manager DUT Type: APPENDIX B: Page 4 of 4 Portable Handset © 2022 Element REV 1.0 04/06/2020 ELEMENT 10 GHz System Verification Date: 07/27/2022 DUT Serial Number 10 GHz Verification Source 1004 Exposure Conditions Phantom Section Position Test Distance [mm] Band Frequency [MHz] 5G FRONT 10.00 Validation band 10000.0 Hardware Setup Probe, Calibration Date DAE, Calibration Date EUmmWV3 - SN9407_F1-55GHz, 2021-12-13 DAE4ip Sn1639, 2022-01-21 Software Setup Software Software Version cDasy6 Module mmWave 3.0.0.841 Scans Setup Scan Type 5G Scan Grid Extents [mm] 120.0 x 120.0 Grid Steps [lambda] 0.25 x 0.25 Sensor Surface [mm] 10.0 Measurement Results Scan Type 5G Scan Avg. Area [cm 2 ] 4.00 pS tot avg [W/m 2 ] 48.1 pS n avg [W/m 2 ] 47.8 E peak [V/m] 142 Deviation [dB] -0.23 30GHz System Verification Calibration Certificate

© 2022 Element REV 1.0 04/06/2020 APPENDIX C: TES T PLOTS C1 C2 C3 C4 C5 ELEMENT DUT: A3LSMF721JPN; Type: Portable Handset; Serial:VEH1098M Com munication System: UID:10010 - CAB, CW; MAIA: Y; Frequency: 5850.0 MHz Medium: 5200-5800 Body; Medium parameters used: f = 5850.0 MHz; cond = 6.32 S/m; perm = 46.2; density = 1000 kg/m3 Phantom Section: Flat; Space: 0.00 mm Test Date: 07/26/2022; Ambient Temp: 20.5 0 C; Tissue Temp: 21.4 0 C Probe: EX3DV4 - SN7551; ConvF:(4.04,4.04,4.04); Calibrated: 2021-10-26 Sensor-Surface: 1.4mm (VMS + 6p) Electronics: DAE4 Sn1449; Calibrated: 2021-09-15 Phantom: Twin-SAM V8.0 (Left); Serial: 1964 Measurement SW: DASY Module SAR V16.0.2.136 Mode: Unintentional, Back Side, 0 mm A rea Scan (120.0 x 200.0): Measurement grid: dx=10.0 mm, dy=10.0 mm Zoom Scan (22.0 x 22.0 x 22.0): Measurement grid: dx=4.0 mm, dy=4.0 mm, dz=1.4 mm; Graded Ratio: 1.4 Reference Value = 0.02 W/kg; Peak SAR (extrapolated) = 0.107 W/kg SAR(1 g) = 0.018 W/kg; C6 ELEMENT Date: 07/27/2022 Device Under Test Properties DUT Serial Number DUT Type A3LSMF721JPN VEH1104M Portable Handset Exposure Conditions Phantom Section Position Test Distance [mm] Frequency [MHz] 5G BACK 2.00 6000 Hardware Setup Probe, Calibration Date DAE, Calibration Date EUmmWV3 – SN9407, 12/13/2021 DAE4ip SN1639, 01/21/2022 Software Setup Software Software Version cDASY6 Module mmWave 3.0.0.841 Scans Setup Scan Type 5G Scan Grid Extents [mm] 120 x 120 Grid Steps [lambda] 0.25 x 0.25 Sensor Surface [mm] 2.0 Measurement Results Scan Type 5G Scan Avg. Area [cm 2 ] 4.00 pS tot avg [W/m 2 ] 0.316 pS n avg [W/m 2 ] 0.304 E peak [V/m] 12.1

FCC ID: A3LSMF721JPN FCC URS (UNINTENTIONAL RADIATOR RF SOURCES) RF EXPOSURE EVALUATION Approved by: Technical Manager DUT Type: APPENDIX D: Page 1 of 3 Portable Handset © 2022 Element REV 1.0 04/06/2020 APPENDIX D:MEASUREMENT UNCERTAINTIES Applicable for SAR measurements with MAGPy-H3D probe and Module WPT FCC ID: A3LSMF721JPN FCC URS (UNINTENTIONAL RADIATOR RF SOURCES) RF EXPOSURE EVALUATION Approved by: Technical Manager DUT Type: APPENDIX D: Page 2 of 3 Portable Handset © 2022 Element REV 1.0 04/06/2020 Applicable for SAR measurements with EX3DVx Probe: FCC ID: A3LSMF721JPN FCC URS (UNINTENTIONAL RADIATOR RF SOURCES) RF EXPOSURE EVALUATION Approved by: Technical Manager DUT Type: APPENDIX D: Page 3 of 3 Portable Handset © 2022 Element REV 1.0 04/06/2020 Applicable for Power Density Measurements: abcdef = g c x f/e Unc.Prob.u i (± dB)Dist.Div.c i (± dB)v i Calibration0.49N110.49∞ Probe Correction0.00R1.7310.00∞ Frequency Response0.20R1.7310.12∞ Sensor Cross Coupling0.00R1.7310.00∞ Isotropy0.50R1.7310.29∞ Linearity0.20R1.7310.12∞ Probe Scattering0.00R1.7310.00∞ Probe Positioning offset0.30R1.7310.17∞ Probe Positioning Repeatability0.04R1.7310.02∞ Sensor MechanicalOffset0.00R1.7310.00∞ Probe Spatial Resolution0.00R1.7310.00∞ Field Impedence Dependance0.00R1.7310.00∞ Amplitude and Phase Drift0.00R1.7310.00∞ Amplitude and Phase Noise0.04R1.7310.02∞ Measurement Area Truncation0.00R1.7310.00∞ Data Acquisition0.03N110.03∞ Sampling0.00R1.7310.00∞ Field Reconstruction2.00R1.7311.15∞ Forward Transformation0.00R1.7310.00∞ Power Density Scaling0.00R1.7310.00∞ Spatial Averaging0.10R1.7310.06∞ System Detection Limit0.04R1.7310.02∞ Probe Coupling with DUT0.00R1.7310.00∞ Modulation Response0.40R1.7310.23∞ Integration Time0.00R1.7310.00∞ Response Time0.00R1.7310.00∞ Device Holder Influence0.10R1.7310.06∞ DUT alignment0.00R1.7310.00∞ RF Ambient Conditions0.04R1.7310.02∞ Ambient Reflections0.04R1.7310.02∞ Immunity/Secondary Reception0.00R1.7310.00∞ Dri…

Text truncated - open the document above for the full version.