A3LSMF741JPNSmartPhone

47 CFR §2.903 and §2.911 (d)(5) Attestation Date: May 22-2024 FCC ID: A3LSMF741JPN To: Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA 1.Samsung Electronics Co., Ltd. (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. 2.Samsung Electronics Co., Ltd. (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment and is not an affiliate or subsidiary of an entity identified on the Covered List. Sincerely yours, Name: Ms. Jenni Chun Job Title: Head of Regulatory & Environmental Affairs Company Name: Samsung Electronics Co., Ltd.

47 CFR §2.911 (d)(7) Agent Designation Attestation Date: May 22-2024 FCC ID: A3LSMF741JPN To: Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Samsung Electronics Co., Ltd. (“the applicant”) as required by section 2.911(d)(7), designates the following agent, located in the United States, for purposes of acting as the applicant’s agent for service of process. The applicant acknowledges that they will maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. The applicant further acknowledges their responsibility to inform the FCC whenever the agent information changes. U. S. Agent Information: Contact Person : Ms. Jenni Chun Company Name : Samsung Electronics Co., Ltd. Company Address : 19 Chapin Rd., Building D, Pine Brook, NJ 07058 Email : [email protected] FRN: 0027908797 Sincerely yours, Name: Ms. Jenni Chun Job Title: Head of Regulatory & Environmental Affairs Company Name: Samsung Electronics Co., Ltd.

Date : Nov. 09, 2017 Rev : 3.0 HACS-F003 FCC Confidentiality Request Letter HCT America LLC ([email protected]) 1726 Ringwood Avenue San Jose, CA 95131 TEL: +1.510.933.8848, Fax: +1.510.933.8849 Page 1 of 2 This document is electronically controlled. Hard copy documents are uncontrolled. Please check all hard copies against the controlled electronic copy to ensure validity. This document is the confidential property of HCT America LLC. It may not be forwarded or reproduced in whole or in part without written permissions from HCT America LLC FCC Confidentiality Request Letter Date : Nov. 09, 2017 Rev : 3.0 HACS-F003 FCC Confidentiality Request Letter HCT America LLC ([email protected]) 1726 Ringwood Avenue San Jose, CA 95131 TEL: +1.510.933.8848, Fax: +1.510.933.8849 Page 2 of 2 This document is electronically controlled. Hard copy documents are uncontrolled. Please check all hard copies against the controlled electronic copy to ensure validity. This document is the confidential property of HCT America LLC. It may not be forwarded or reproduced in whole or in part without written permissions from HCT America LLC REVISION TABLE Rev Description of Change Date Approved 1.0 Original Release(Obsolete) 06/14/2012 QM 2.0 Updated template(Obsolete) 10/01/2012 QM 2.1 Updated address(Obsolete) 01/10/2014 QM 2.2 Updated address 11/18/2016 QM 3.0 Updated LTC and STC Confidentiality table 11/09/2017 QM HACS-F003 FCC Confidentiality Request Letter Rev : 3.0 DATE : May 22, 2024 To: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD SUBJECT: Request for Confidentiality for FCC ID: A3LSMF741JPN We hereby request confidential treatment of the information accompanying this application as outlined below: LONG-TERM AND SHORT-TERM CONFIDENTIAL LIST LONG-TERM CONFIDENTIAL Exhibit Description 1 Block Diagram 2 Operational Description 3 Parts List/ Tune-up procedure 4 Schematics SHORT-TERM CONFIDENTIAL (180 DAYS) 5 External Photos 6 Internal Photos 7 Test-Setup Photos 8 User’s Manual The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 & 0.459 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Signed by: Jenni Chun / General Manager Samsung Electronics America, Inc. Address: 19 Chapin Rd., Building D Pine Brook, NJ 07058 Tel: 1-973-808-6375

Date : Nov. 9, 2017 Rev : 2.3 HACS-F004 FCC Agent Authorization Letter HCT America LLC ([email protected]) 1726 Ringwood Avenue San Jose, CA 95131 TEL: +1.510.933.8848, Fax: +1.510.933.8849 Page 1 of 2 This document is electronically controlled. Hard copy documents are uncontrolled. Please check all hard copies against the controlled electronic copy to ensure validity. This document is the confidential property of HCT America LLC. It may not be forwarded or reproduced in whole or in part without written permissions from HCT America LLC FCC Agent Authorization Letter Date : Nov. 9, 2017 Rev : 2.3 HACS-F004 FCC Agent Authorization Letter HCT America LLC ([email protected]) 1726 Ringwood Avenue San Jose, CA 95131 TEL: +1.510.933.8848, Fax: +1.510.933.8849 Page 2 of 2 This document is electronically controlled. Hard copy documents are uncontrolled. Please check all hard copies against the controlled electronic copy to ensure validity. This document is the confidential property of HCT America LLC. It may not be forwarded or reproduced in whole or in part without written permissions from HCT America LLC REVISION TABLE Rev Description of Change Date Approved 1.0 Original Release(Obsolete) 06/14/2012 QM 2.0 Updated template(Obsolete) 10/01/2012 QM 2.1 Updated address(Obsolete) 01/10/2014 QM 2.2 Updated address 11/18/2016 QM 2.3 Fixed Typo “Agent” 11/09/2017 QM HACS-F004 FCC Agent Authorization Letter Rev : 2.3 DATE: May 22, 2024 To: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD To whom it may concern: Subject: FCC Agent Authorization Letter for FCC ID: A3LSMF741JPN We, the undersigned, hereby authorize HCT CO., LTD. to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by HCT CO., LTD. on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). We recognize that we are still responsible for the terms and conditions outlined in the HCT America Client Services Agreement. We declare that the information provided to the FCC is true and correct to the best of our knowledge (47 CFR 2.911(d)) and we have been informed of the grantee responsibilities (47 CFR 2.909) with regard to certified equipment. This authorization is valid until further written notice from the applicant. Sincerely, Signed by: Jenni Chun / General Manager Samsung Electronics America, Inc. Address: 19 Chapin Rd., Building D Pine Brook, NJ 07058 Tel: 1-973-808-6375

Description of E-label on the A3LSMF741JPN Date: May 20 th , 2024 FCC ID: A3LSMF741JPN This model is applied E-label, please find description of E-label below. 1.FCC ID (E-label): Settings > About Phone > Status Information FCC certification FCC ID: A3LSMF741JPN <Device Display Screen> 2. FCC ID on the Quick Start Guide The FCC has granted an Equipment Authorization for this model device based on the compliance of all reported SAR levels with the FCC RF exposure guide lines. This device has a FCC ID number A3LSMF741JPN [Model Number: SC-54E] and the specific SAR levels for this device can be found at the following. FCC website: www.fcc.gov/oet/ea/ The SAR information for this device can be found on Samsung’s website: www.samsung.com/sar

Samsung Electronics Co., LTD. 12 9, Sa msu ng -ro , Yeongton g-gu Suwon-City, Gyeong gi-d o, 16677, Ko rea Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Subject: E-Label Attestation Letter FCC ID: A3LSMF741JPN To Whom it Ma y Concern We hereby provide the following attestations according to CFR 2.935 and FCC KDB 784748 D02: At the time of purchase, the FCC ID is readily and physically visible to the purchaser on the exterior package per CFR 2.935(f). The FCC ID will be readily legible without the aid of magnification according to CFR 2.935(d). The literature in the package describes how to access the electr onic display to find the FCC ID per CFR 2. 935(b) and FCC KDB 784748. Per CFR 2.935(c), the user will be able to access this information within a maximum of 3 steps. The user will be able to access this information without a SIM card, special accessories or supplemental plug- ins. Per CFR 2.935(e), We, Samsung have programmed the e- label and it is not able to be modified by any third party. Per CFR 2.935(f), the FCC ID will be able to survive normal shipping and handling so it is visible for in spection at the time of import. Shou ld you have any questions or comments concern ing the abov e, please contact the undersigned. Sincerely, ---------------------------------------------------- Jenni Chun / General Manager Samsung Electronics America, Inc. Address: 19 Chapin Rd., Building D Pine Brook, NJ 07058 Tel: 1-973-808-6375

F-TP22-03 (Rev. 06) Page 1 of 37 The report shall not be (partly) reproduced except in full without approval of the laboratory. HCT CO.,LTD . 2-6, 73, 74, Seoicheon-ro 578beon-gil, Majang-myeon, Icheon-si, Gyeonggi-do, 17383 KOREA Tel. +82 31 645 6300 F ax. +82 31 6456401 Testing and Certification TEST REPORT Part 0 SAR Test for Characterization APPLICANT Samsung Electronics. Co., Ltd. REPORT NO. HCT-SR-2405-FC009 DATE OF ISSUE May. 28, 2024 Tested by Moon Pyung, Choi (signature) Technical Manager Yun Jeang, Heo (signature) The report shall not be (partly) reproduced except in full without approval of the laboratory. F-TP22-03 (Rev. 06) Page 2 of 37 HCT CO.,LTD. 2-6, 73, 74, Seoicheon-ro 578beon-gil, Majang-myeon, Icheon-si, Gyeonggi-do, 17383 KOREA Tel. +82 31 645 6300 Fax. +82 31 645 6401 TE S T R E P O R T P A R T 0 S A R T e s t f o r c e r t i f i c a t i o n REPORT NO. HCT-SR-2405-FC009 DATE OF ISSUE May 28, 2024 FCC ID A3LSMF741JPN Applicant SAMSUNG Electronics Co., Ltd 129, Samsung-ro, Yeongtong-gu, Suwon-Si, Gyeonggi-do, 16677, Korea Product Name Model Name Additional Model Name Mobile Phone SC-54E SCG29 Date of Test May. 01, 2024 ~ May. 24, 2024 Location of Test ■ Permanent Testing Lab □ On Site Testing Lab (Address: 74, Seoicheon-ro 578beon-gil, Majang-myeon, Icheon-si, Gyeonggi-do, 17383 KOREA) FCC Rule Part(s) CFR §2.1093 The report shall not be (partly) reproduced except in full without approval of the laboratory. F-TP22-03 (Rev. 06) Page 3 of 37 Report No. HCT-SR-2405-FC009 REVISION HISTORY The revision history for this test report is shown in table. Revision No. Date of Issue Description 0 May 28, 2024 Initial Release Notice Content The results shown in this test report only apply to the sample(s), as received, provided by the applicant, unless otherwise stated. The test results have only been applied with the test methods required by the standard(s). The laboratory is not accredited for the test results marked *. Information provided by the applicant is marked **. Test results provided by external providers are marked ***. When confirmation of authenticity of this test report is required, please contact www.hct.co.kr The test results in this test report are not associated with the ((KS Q) ISO/IEC 17025) accreditation by KOLAS (Korea Laboratory Accreditation Scheme) / A2LA (American Association for Laboratory Accreditation) that are under the ILAC (International Laboratory Accreditation Cooperation) Mutual Recognition Agreement (MRA). The report shall not be (partly) reproduced except in full without approval of the laboratory. F-TP22-03 (Rev. 06) Page 4 of 37 Report No. HCT-SR-2405-FC009 CONTENTS 1. Test Location ...................................................................................................................................................... 5 2. DEVICE UNDER TEST DESCRIPTION ........................................................................................................... 6 3. SAR MEASUREMENTS ..................................................................................................................................... 8 4. SAR CHARAC TERIZATION ........................................................................................................................... 10 5. Equipment List ................................................................................................................................................. 11 6. Measurement Uncertainty ............................................................................................................................ 16 Appendix A: SAR Test Results For P limit CALCULATIONS ....................................................................... 17 The report shall not be (partly) reproduced except in full without approval of the laboratory. F-TP22-03 (Rev. 06) Page 5 of 37 Report No. HCT-SR-2405-FC009 1. Test Location 1.1 Test Laboratory Company Name HCT Co., Ltd. Address 74, Seoicheon-ro 578beon-gil, Majang-myeon, Icheon-si,Gyeonggi-do, 17383 KOREA Telephone 031-645-6300 Fax. 031-645-6401 1.2 Test Facilities Our laboratories are accredited and approved by the following approval agencies according to ISO/IEC 17025. Korea National Radio Research Agency (Designation No. KR0032) KOLAS (Testing No. KT197) 1.3 General Information of the EUT Model Name SC-54E Additional Model Name SCG29 Equipment Type Mobile Phone FCC ID A3LSMF741JPN Application Type Certification Applicant SAMSUNG Electronics Co., Ltd. The report shall not be (partly) reproduced except in full without approval of the laboratory. F-TP22-03 (Rev. 06) Page 6 of 37 Report No. HCT-SR-2405-FC009 2. DEVICE UNDER TEST DESCRIPTION This device uses the Qualcomm® Smart Transmit feature to control and manage transmitting power in real time and to ensure the time-averaged RF exposure is in compliance with the FCC requirement at all times for 2G/3G/4G/5G WWAN/WLAN/BT operations. Additionally, this device supports NFC technology, but the output power of this technology is not controlled by the Smart Transmit algorithm. Device Wireless specification overview Band & Mode Operating Mode Tx Frequency GSM850 Voice / Data 824.2 ㎒ ~ 848.8 ㎒ GSM1900 Voice / Data 1 850.2 ㎒ ~ 1 909.8 ㎒ UMTS Band 5 Voice / Data 826.4 ㎒ ~ 846.6㎒ LTE FDD Band 2 (PCS) Voice / Data 1 850.7 ㎒ ~ 1 909.3㎒ LTE FDD Band 4 (AWS) Voice / Data 1 710.7 ㎒ ~ 1 754.3㎒ LTE FDD Band 5 (Cell) Voice / Data 824.7 ㎒ ~ 848.3 ㎒ LTE FDD Band 12 Voice / Data 699.7 ㎒ ~ 715.3㎒ LTE FDD Band 13 Voice / Data 779.5 ㎒ ~ 784.5㎒ LTE TDD Band 41 Voice / Data 2 498.5 ㎒ ~ 2 687.5 ㎒ LTE FDD Band 66 (AWS) Voice / Data 1 710.7 ㎒ ~ 1 779.3 ㎒ NR FDD Band n5 Voice / Data 826.5 ㎒ ~ 846.5 ㎒ NR TDD Band n41 Voice / Data 2 501.01 ㎒ ~ 2 685 ㎒ NR FDD Band n66 Voice / Data 1 712.5 ㎒ ~ 1 777.5 ㎒ U-NII-1 Voice / Data 5 180 ㎒ ~ 5 240 ㎒ U-NII-2A Voice / Data 5 260㎒ ~ 5 320 ㎒ U-NII-2C Voice / Data 5 500 ㎒ ~ 5 720 ㎒ U-NII-3 Voice / Data 5 745㎒ ~ 5 825 ㎒ U-NII-4 Voice / Data 5 845 ㎒ ~ 5 885㎒ U-NII-5 Voice / …

Text truncated - open the document above for the full version.

The report shall not be (partly) reproduced except in full without approval of the laboratory. F-TP22-03 (Rev. 06) Page 276 of 330 Report No. HCT-SR-2405-FC010 11.5 WIFI Conducted Power measurement method Un-Licensed Bands (DTS Band) Test Description Test Procedure Used Conducted Output Power - KDB 558074 v05 - Section 8.3.2.3 - ANSI 63.10-2013 - Section 11.9.2.3 Test Procedure 1. Measure the duty cycle. 2. Measure the average power of the transmitter. This measurement is an average over both the on and off periods of the transmitter. 3. Add 10 log (1/x), where x is the duty cycle, to the measured power in order to compute the average power during the actual transmission times. Test setup Un-Licensed Bands (NII Band) Test Description Test Procedure Used Conducted Output Power - KDB 789033 D02 v02r01 - Section E.3.a Test Procedure 1. Measure the duty cycle. 2. Measure the average power of the transmitter. This measurement is an average over both the on and off periods of the transmitter. 3. Add 10 log (1/x), where x is the duty cycle, to the measured power in order to compute the average power during the actual transmission times. Test setup EUT Spectrum Analyzer Coax Cable The report shall not be (partly) reproduced except in full without approval of the laboratory. F-TP22-03 (Rev. 06) Page 277 of 330 Report No. HCT-SR-2405-FC010 11.5.1 IEEE 802.11 (2.4 ㎓) Maximum Conducted Power Mode Frequency [㎒] Channel IEEE 802.11 (2.4 ㎓) Average RF Conducted Power [dBm] WIFI 1 WIFI 2 MIMO 802.11b 2 412 1 17.86 17.29 20.59 2 437 6 17.57 17.59 20.59 2 462 11 17.56 17.45 20.51 2 467 12 -0.15 -1.98 1.86 2 472 13 -0.16 -2.04 1.99 11.5.2 IEEE 802.11 (5 ㎓) Maximum Conducted Power Mode Frequency [㎒] Channel IEEE 802.11 (5㎓) Average RF Conducted Power [dBm] WIFI 1 WIFI 2 MIMO 802.11a (20 ㎒ BW) 5 180 36 15.09 13.42 17.34 5 200 40 14.81 13.55 17.23 5 220 44 14.78 13.77 17.31 5 240 48 14.62 13.84 17.26 5 260 52 14.17 14.12 17.15 5 280 56 14.12 14.32 17.23 5 300 60 13.90 14.20 17.06 5 320 64 13.63 14.12 16.89 5 500 100 14.42 14.97 17.71 5 600 120 15.13 15.90 18.54 5 620 124 15.23 15.98 18.63 5 720 144 15.42 15.86 18.65 5 745 149 14.95 15.42 18.20 5 785 157 15.03 14.90 17.97 5 825 165 15.24 14.97 18.12 5 846 169 15.37 15.22 18.30 5 865 173 15.42 15.03 18.24 5 885 177 15.18 14.42 17.82 The report shall not be (partly) reproduced except in full without approval of the laboratory. F-TP22-03 (Rev. 06) Page 278 of 330 Report No. HCT-SR-2405-FC010 Justification for test configurations for WLAN per KDB Publication 248227 D01v02r02: ▪ Power measurements were performed for the transmission mode configuration with the highest maximum output power specified for production units. ▪ For transmission mode with the same maximum output power specification, powers were measured for the largest channel Bandwidth, lowest order modulation and lowest data rate. ▪ For transmission modes with identical maximum specified output power, channel Bandwidth, modulation and data rates, power measurements were required for all identical configurations. ▪ For each transmission mode configuration, powers were measured for the highest and lowest channels; and at the mid-Band channel(s) when there were at least 3 channels supported. For configurations with multiple mid-Band channels, due to an even number of channels, both channels were measured. Test Configuration 11.6 Bluetooth Maximum Conducted Power The Burst Averaged-conducted power Mode Channel Max. Average Conducted Power [dBm] Ant.1 Ant.2 DH5 0 18.91 17.38 39 18.71 17.63 78 18.07 15.47 2-DH5 0 16.45 13.69 39 15.46 14.30 78 15.10 12.56 3-DH5 0 16.42 13.83 39 15.44 14.31 78 15.08 12.58 Per October 2016 TCB Workshop Notes: When call box and Bluetooth protocol are used for Bluetooth SAR measurement, time-domain plot is required to identify duty factor for supporting the test setup and result. Bluetooth duty cycle was measured using Bluetooth tester equipment (CBT / R&S) with Bluetooth. EUT Spectrum Analyzer Coax Cable The report shall not be (partly) reproduced except in full without approval of the laboratory. F-TP22-03 (Rev. 06) Page 279 of 330 Report No. HCT-SR-2405-FC010 Bluetooth DH 5 Mode Duty Cycle = (BT-On time /BT-Full time) =(2.890/3.750) = 0.771 (DH5) BT DH5 Maximum Duty Factor: The theoretical maximum duty cycle defined by chipset manufacturer is 78.00 % In the ideal theory Duty Cycle, the test error tolerance [1%] of the test equipment was considered and applied to the measurement results.The duty cycle of DH5 measured by DUT was 77.1%, and the duty cycle was compensated by applying test error tolerance 1%. For more information on BT , please refer to the technical description document. The report shall not be (partly) reproduced except in full without approval of the laboratory. F-TP22-03 (Rev. 06) Page 280 of 330 Report No. HCT-SR-2405-FC010 12. System Verification 12.1 Tissue Verification The head simulating material is calibrated by HCT using the DAKS 3.5 to determine the conductivity and permittivity. Table for Head Tissue Verification Date of Tests Tissue Temp. (°C) Tissue Type Freq. (㎒) Measured Conductivity σ (S/m) Measured Dielectric Constant, ε Target Conductivity σ (S/m) Target Dielectric Constant, ε % dev σ % dev ε 05/07/2024 19.5 750H 705 0.852 43.739 0.889 42.174 - 4.16 + 3.71 710 0.858 43.667 0.890 42.148 - 3.60 + 3.60 750 0.902 43.089 0.893 41.940 + 1.01 + 2.74 05/08/2024 19.8 750H 705 0.853 43.848 0.889 42.174 - 4.05 + 3.97 710 0.858 43.775 0.890 42.148 - 3.60 + 3.86 750 0.902 43.195 0.893 41.940 + 1.01 + 2.99 05/09/2024 20.1 750H 750 0.873 42.988 0.893 41.940 - 2.24 + 2.50 785 0.908 42.490 0.896 41.758 + 1.34 + 1.75 05/10/2024 20.4 750H 750 0.873 43.115 0.893 41.940 - 2.24 + 2.80 785 0.908 42.615 0.896 41.758 + 1.34 + 2.05 05/15/2024 20.9 835H 820 0.922 41.491 0.899 41.577 + 2.56 - 0.21 835 0.937 41.279 0.900 41.500 + 4.11 - 0.53 850 0.952 41.120 0.916 41.500 + 3.93 - 0.92 05/14/2024 20.7 835H 820 0.922 41.335 0.899 41.577 + 2.56 - 0.58 835 0.936 41.131 0.900 41.…

Text truncated - open the document above for the full version.

The report shall not be (partly) reproduced except in full without approval of the laboratory. Report No. HCT-SR-2405-FC010 F-TP22-03 (Rev. 05) Page 1 of 109 Appendix B. – SAR Test Plots The report shall not be (partly) reproduced except in full without approval of the laboratory. Report No. HCT-SR-2405-FC010 F-TP22-03 (Rev. 05) Page 2 of 109 Test Laboratory: HCT CO., LTD EUT Type: Mobile Phone Ambient Temperature: 20.9 °C Liquid Temperature: 20.9 °C Test Date: 05/15/2024 Plot No.: A1 DUT: SC-54E Communication System: UID 0, GSM 850 (0); Frequency: 836.6 MHz;Duty Cycle: 1:8.30042 Medium parameters used (interpolated): f = 836.6 MHz; σ = 0.939 S/m; ε r = 41.256; ρ = 1000 kg/m 3 Phantom section: Right Section DASY5 Configuration: • Probe: EX3DV4 - SN7681; ConvF(9.17, 9.37, 9.66) @ 836.6 MHz; Calibrated: 2023-11-27 • Sensor-Surface: 1.4mm (Mechanical Surface Detection) • Electronics: DAE4 Sn1720; Calibrated: 2024-04-19 • Phantom: SAM with CRP v5.0(Front); Type: QD000P40CD; Serial: TP:xxxx • Measurement SW: DASY52, Version 52.10 (4); SEMCAD X Version 14.6.14 (7483) GSM850 Head Right Touch 190ch/Area Scan (8x14x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.135 W/kg GSM850 Head Right Touch 190ch/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 4.192 V/m; Power Drift = 0.15 dB Peak SAR (extrapolated) = 0.142 W/kg SAR(1 g) = 0.123 W/kg; SAR(10 g) = 0.098 W/kg Maximum value of SAR (measured) = 0.137 W/kg 0 dB = 0.137 W/kg = -8.63 dBW/kg The report shall not be (partly) reproduced except in full without approval of the laboratory. Report No. HCT-SR-2405-FC010 F-TP22-03 (Rev. 05) Page 3 of 109 Test Laboratory: HCT CO., LTD EUT Type: Mobile Phone Ambient Temperature: 20.2 °C Liquid Temperature: 20.1 °C Test Date: 05/16/2024 Plot No.: A2 DUT: SC-54E Communication System: UID 0, GSM 1900 4TX (0); Frequency: 1880 MHz;Duty Cycle: 1:2.07491 Medium parameters used: f = 1880 MHz; σ = 1.352 S/m; ε r = 39.25; ρ = 1000 kg/m 3 Phantom section: Left Section DASY5 Configuration: • Probe: EX3DV4 - SN7681; ConvF(7.94, 8.33, 8.49) @ 1880 MHz; Calibrated: 2023-11-27 • Sensor-Surface: 1.4mm (Mechanical Surface Detection) • Electronics: DAE4 Sn1720; Calibrated: 2024-04-19 • Phantom: SAM with CRP v5.0(Front); Type: QD000P40CD; Serial: TP:xxxx • Measurement SW: DASY52, Version 52.10 (4); SEMCAD X Version 14.6.14 (7483) GSM1900 Head Left Touch 661ch/Area Scan (8x14x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.0142 W/kg GSM1900 Head Left Touch 661ch/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 0 V/m; Power Drift = 0.00 dB Peak SAR (extrapolated) = 0.0150 W/kg SAR(1 g) = 0.00964 W/kg; SAR(10 g) = 0.00657 W/kg Maximum value of SAR (measured) = 0.0138 W/kg 0 dB = 0.0138 W/kg = -18.60 dBW/kg The report shall not be (partly) reproduced except in full without approval of the laboratory. Report No. HCT-SR-2405-FC010 F-TP22-03 (Rev. 05) Page 4 of 109 Test Laboratory: HCT CO., LTD EUT Type: Mobile Phone Ambient Temperature: 20.7 °C Liquid Temperature: 20.7 °C Test Date: 05/14/2024 Plot No.: A3 DUT: SC-54E Communication System: UID 0, WCDMA850 (0); Frequency: 836.6 MHz;Duty Cycle: 1:1 Medium parameters used (interpolated): f = 836.6 MHz; σ = 0.937 S/m; ε r = 41.106; ρ = 1000 kg/m 3 Phantom section: Right Section DASY5 Configuration: • Probe: EX3DV4 - SN7681; ConvF(9.17, 9.37, 9.66) @ 836.6 MHz; Calibrated: 2023-11-27 • Sensor-Surface: 1.4mm (Mechanical Surface Detection) • Electronics: DAE4 Sn1720; Calibrated: 2024-04-19 • Phantom: SAM with CRP v5.0(Front); Type: QD000P40CD; Serial: TP:xxxx • Measurement SW: DASY52, Version 52.10 (4); SEMCAD X Version 14.6.14 (7483) UMTS Band 5 Head Right Touch 4183ch/Area Scan (8x14x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.162 W/kg UMTS Band 5 Head Right Touch 4183ch/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 1.391 V/m; Power Drift = 0.10 dB Peak SAR (extrapolated) = 0.189 W/kg SAR(1 g) = 0.139 W/kg; SAR(10 g) = 0.110 W/kg Maximum value of SAR (measured) = 0.170 W/kg 0 dB = 0.170 W/kg = -7.70 dBW/kg The report shall not be (partly) reproduced except in full without approval of the laboratory. Report No. HCT-SR-2405-FC010 F-TP22-03 (Rev. 05) Page 5 of 109 Test Laboratory: HCT CO., LTD EUT Type: Mobile Phone Ambient Temperature: 20.7 °C Liquid Temperature: 20.6 °C Test Date: 05/09/2024 Plot No.: A4 DUT: SC-54E Communication System: UID 0, LTE Band 2 (0); Frequency: 1860 MHz;Duty Cycle: 1:1 Medium parameters used: f = 1860 MHz; σ = 1.374 S/m; ε r = 39.314; ρ = 1000 kg/m 3 Phantom section: Left Section DASY5 Configuration: • Probe: EX3DV4 - SN7370; ConvF(8.29, 8.29, 8.29) @ 1860 MHz; Calibrated: 2023-08-24 • Sensor-Surface: 1.4mm (Mechanical Surface Detection) • Electronics: DAE4 Sn780; Calibrated: 2023-07-04 • Phantom: SAM with CRP v5.0(Right); Type: QD000P40CD; Serial: TP:xxxx • Measurement SW: DASY52, Version 52.10 (4); SEMCAD X Version 14.6.14 (7501) LTE Band 2 Head Left Touch QPSK 20MHz 50RB 25offset 18700ch/Area Scan (8x14x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.998 W/kg LTE Band 2 Head Left Touch QPSK 20MHz 50RB 25offset 18700ch/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 6.373 V/m; Power Drift = 0.17 dB Peak SAR (extrapolated) = 1.26 W/kg SAR(1 g) = 0.544 W/kg; SAR(10 g) = 0.236 W/kg Maximum value of SAR (measured) = 1.03 W/kg 0 dB = 1.03 W/kg = 0.13 dBW/kg The report shall not be (partly) reproduced except in full without approval of the laboratory. Report No. HCT-SR-2405-FC010 F-TP22-03 (Rev. 05) Page 6 of 109 Test Laboratory: HCT CO., LTD EUT Type: Mobile Phone Ambient Temperature: 19.5 °C Liquid Temperature: 19.5 °C Test Date: 05/07/2024 Plot No.: A5 DUT: SC-54E Communication System: UID 0, LTE Band 5 (0); Frequency: 836.5 MHz;Duty Cycle: 1:1 Medium parameters used (interpolated): f = 836.5 MHz; σ = 0.936 S/…

Text truncated - open the document above for the full version.

F-TP22-03 (Rev. 06) Page 1 of 72 The report shall not be (partly) reproduced except in full without approval of the laboratory. HCT CO.,LTD . 2-6, 73, 74, Seoicheon-ro 578beon-gil, Majang-myeon, Icheon-si, Gyeonggi-do, 17383 KOREA Tel. +82 31 645 6300 F ax. +82 31 6456401 Testing and Certification TEST REPORT PART 2: RF Exposure Compliance Test of SC-54E APPLICANT Samsung Electronics. Co., Ltd. REPORT NO. HCT-SR-2405-FC008 DATE OF ISSUE May. 28, 2024 Tested by Jung Hun Park (signature) Technical Manager Yun Jeang, Heo (signature) The report shall not be (partly) reproduced except in full without approval of the laboratory. F-TP22-03 (Rev. 06) Page 2 of 72 HCT CO.,LTD. 2-6, 73, 74, Seoicheon-ro 578beon-gil, Majang-myeon, Icheon-si, Gyeonggi-do, 17383 KOREA Tel. +82 31 645 6300 Fax. +82 31 645 6401 TE S T R E P O R T P A R T 2 R F E x p o s u r e C o m p l i a n c e T e s t f o r c e r t i f i c a t i o n REPORT NO. HCT-SR-2405-FC008 DATE OF ISSUE May. 28, 2024 FCC ID A3LSMF741JPN Applicant SAMSUNG Electronics Co., Ltd 129, Samsung-ro, Yeongtong-gu, Suwon-Si, Gyeonggi-do, 16677, Korea Product Name Model Name Additional Model Name Mobile Phone SC-54E SCG29 Date of Test May. 15, 2024~ May. 26, 2024. Location of Test ■ Permanent Testing Lab □ On Site Testing Lab (Address: 74, Seoicheon-ro 578beon-gil, Majang-myeon, Icheon-si, Gyeonggi-do, 17383 KOREA) FCC Rule Part(s) CFR §2.1093 Results Pass The report shall not be (partly) reproduced except in full without approval of the laboratory. F-TP22-03 (Rev. 06) Page 3 of 72 Report No. HCT-SR-2405-FC008 REVISION HISTORY The revision history for this test report is shown in table. Revision No. Date of Issue Description 0 May. 28, 2024 Initial Release Notice Content The results shown in this test report only apply to the sample(s), as received, provided by the applicant, unless otherwise stated. The test results have only been applied with the test methods required by the standard(s). The laboratory is not accredited for the test results marked *. Information provided by the applicant is marked **. Test results provided by external providers are marked ***. When confirmation of authenticity of this test report is required, please contact www.hct.co.kr The test results in this test report are not associated with the ((KS Q) ISO/IEC 17025) accreditation by KOLAS (Korea Laboratory Accreditation Scheme) / A2LA (American Association for Laboratory Accreditation) that are…

Text truncated - open the document above for the full version.