A3LSMF916BGSM/WCDMA/LTE Phone + BT/BLE, DTS/UNII a/b/g/n/ac/ax, UWB, WPT and NFC

SM-F916B Package content • Device • USB cable • Ejection pin • USB power adaptor • Quick start guide Accessing more information To view the full user manual on your device, launch the Settings app and tap User manual. Visit www.samsung.com to view device information, the user manual, and more. To turn on the device, press and hold the Power key for a few seconds. Installing a nano-SIM card and a microSD card Insert the ejection pin into the hole next to the tray to loosen the tray. Gently press the card into the tray to secure it. Charging the battery Before using the device for the first time, you must charge the battery. Using the Home button When you turn on the screen, the Home button will appear at the bottom of the screen as a soft button. Correct disposal Safety information Read all safety information before using the device to ensure safe and proper use. Warning Follow the warning information provided below to prevent incidents such as fire or explosion • Do not expose the device to physical impact or damage. • Use manufacturer-approved batteries, chargers, accessories, and supplies. • Prevent the multipurpose jack and battery terminals from contacting conductive elements, such as metal or liquids. • If any part of the device, such as the glass or acrylic body, is broken, smokes, or emits a burning odor, stop using the device immediately. Use the device again only after it has been repaired at a Samsung Service Centre. • Do not turn on or use the device when the battery compartment is exposed. Follow the warnings below to prevent injury to people or damage to the device • Do not allow children or animals to chew or suck the device. • If the device has a camera flash or light, do not use it close to the eyes of people or animals. • The device can be used in locations with an ambient temperature of 0 °C to 35 °C. You can store the device at an ambient temperature of -20 °C to 50 °C. Using or storing the device outside of the recommended temperature ranges may damage the device or reduce the battery’s lifespan. • Do not use your device in a hot environment or near fire. • Comply with all safety warnings and regulations regarding mobile device usage while operating a vehicle. You can view more safety information, including device and battery disposal instructions, in the safety information menu of the Settings app. • It is recommended not to use fixed graphics on part or all of the touchscreen for extended periods. Doing so may result in afterimages (screen burn-in) or ghosting. THIS DEVICE MEETS INTERNATIONAL GUIDELINES FOR EXPOSURE TO RADIO WAVES Your mobile is designed not to exceed the limits for exposure to radio waves recommended by international guidelines. The guidelines were developed by an independent scientific organisation (ICNIRP) and include a substantial safety margin designed to assure the safety of all persons, regardless of age and health. The radio wave exposure guidelines use a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit for mobile devices is 2.0 W/kg. The highest SAR values under the ICNIRP guidelines for this device model are: SAR values for European countries: The SAR values below are only for devices developed for use in European countries. Maximum SAR for this model and conditions under which it was recorded Head SAR TBD W/kg Body-worn SAR TBD W/kg Body-worn SAR testing has been carried out at a separation distance of 0.5 cm. To meet RF exposure guidelines during body-worn operation, the device should be positioned at least this distance away from the body. For SAR values for all other countries: For SAR values specific to your model, visit www.samsung.com/sar and search for your region and device with the model number. The use of WLAN band is restricted to indoor use only. This restriction will be applied in all countries below. The items supplied with the device may vary by region. • The user manual may not be available depending on the web browser or service provider. • You may incur additional charges for accessing the Internet. • Use only a nano-SIM card. • Ensure that the ejection pin is perpendicular to the hole. Otherwise, the device may be damaged. • If the card is not fixed firmly into the tray, the card may leave or fall out of the tray. Nano-SIM cards and microSD cards are sold separately. Use only USB Type-C cable supplied with the device. The device may be damaged if you use Micro USB cable. The charger should remain close to the electric socket and easily accessible while charging. This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger, headset, USB cable) should not be disposed of with other household waste. This product is RoHS compliant. This marking on the battery, manual or packaging indicates that the batteries in this product should not be disposed of with other household waste. To prevent possible hearing damage when using a headset, do not listen to sound at high volume for long periods. Specific Absorption Rate (SAR) certification information Draft SAMSUNG CONFIDENTIAL • To transfer data of the previous device to a new device: Visit ww.samsung.com/smartswitch for more information. • If your device is frozen and unresponsive, press nd hold the Power key and the Volume Down key simultaneously for more than 7 seconds to restart it. Some content may differ from your device depending on the region, service provider, or software version , and is subject to change without prior notice. Copyright © 2019 Samsung Electronics Your device is a radio transmitter and receiver. It is designed and manufactured not to exceed the exposure limits for Radio Frequency (RF) energy set by the Federal Communications Commission (FCC) of the U.S. Government. These FCC RF exposure limits are derived from the recommendations of two expert organizations: the National Council on Radiation Protection and Measurement (NCRP) and the Institute of Electrical and…

Text truncated - open the document above for the full version.

SAMSUNG CONFIDENTIAL Samsung Electronics Co., Ltd. 129, Samsung-ro, Yeongtong-gu Suwon-si, Gyeonggi-do, 16677, Korea Federa l Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 E-label Attestation Letter - FCC ID : A3LSMF916B - Model : SM-F916B To W hom It May Concern We her eby provide the following attestations according to CFR 2.935 and FCC KDB 784748 D02: At the time of purchase, the FCC ID is readily and physically visible to the purchaser on the exterior package per CFR 2.935(f). The FCC ID will be readily legible without the aid of magnification according to CFR 2.935(d). The literature in the package describes how to access the electronic display to find FCC ID per CFR 2.935(b) and FCC KDB 784748. Per CFR 2.935(c), the user will be able to access this information within a maximum of 3 steps. The user will be able to access this information without a SIM card, special accessories or supplemental plug-ins. Per CFR 2.935(e), We, Samsung Electronics Co., Ltd., have programmed the e-label and it is not able to be modified by any third party. Per C FR 2.935(f), the FCC ID will be able to survive normal shipping and handling so it is visible for inspection at the time of import. Shoul d you have any questions or comments concerning the above, please contact the undersigned. Sinc erely, Ms. J enni Chun General Manager Regulatory & Environmental Affairs Samsung Electronics Co., Ltd. TEL : +1-973-808-6375 E- mail : [email protected]

Date: November 27, 2019 UL Korea, Ltd. Suwon Laboratory 218 Maeyeong-ro, Yeongtong-gu, Suwon-si, Gyeonggi-do, 16675, Korea To whom it may concern: I, the undersigned, hereby authorize UL Korea, Ltd. Suwon Laboratory, to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by UL Korea, Ltd. Suwon Laboratory on our behalf shall have the same effect as acts of our own. In authorizing UL Korea as our agent, we still recognize that we are responsible to: a) comply with the relevant provisions of the certification program; b) make all necessary arrangements for the conduct of the evaluation, including provision for examining documentation and access to all areas, records (including internal audit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment, surveillance, reassessment) and resolution of complaints; c) make claims regarding certification only in respect of the scope for which certification has been granted; d) do not use our product certification in such a manner as to bring the Certification Division into disrepute and not make any statement regarding our product certification which the Certification Division may consider misleading or unauthorized; e) upon suspension or cancellation of certification, discontinue use of all advertising matter that contains any reference thereto and return any certification documents as required by the Certification Division; f) use certification only to indicate the products are certified as being in conformity with specified standards; g) endeavor to ensure that no certificate or report nor any part thereof is used in a misleading manner; h) ensure that any reference to our product certification in communication media such as documents, brochures or advertising, complies with the requirements of the Certification Division; i) keep a record of all complaints made known to the us relating to the product’s compliance with requirements of the relevant standard and to make these records available to the when requested; j) take appropriate action with respect to such complaints and any deficiencies found in products or services that affect compliance with the requirements for certification; k) document the actions taken. l) the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). This authorization is valid until further written notice from the applicant. Sincerely Yours, Ms. Jenni Chun General Manager Samsung Electronics America, Inc. TEL: +1-973-808-6375 E-mail: [email protected]

July 18, 2020 Federal Comm unications Commission 7435 Oakland Mills Road Columbia MD 21046 Subject: FCC ID: Request for Confidentiality A3LSMF916B To Whom It May Concern: Pursuant to the provisions of Sections 0.457 and 0.459 of the Commission’s rules (47 CFR §§ 0. 457, 0.459), we are requesting the Commission to withhold the following attachments as confidential document from public disclosure indefinitely. Schematics Block Diagram Operational Description Antenna Specification Parts List Tune-Up Procedure Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In additional to above mentioned documents, pursuant to Public Notice DA 04-1705 of the Commission’s policy, in order to comply with the marketing regulations in 47 CFR §2.803 and the importation rules in 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We are requesting the commission to grant short-term confidentiality request on the following attachments until 180 days External Photos Internal Photos Test Setup Photos User Manual It is our understanding that all measurement test reports, FCC ID label format and correspondence during certification review process cannot be granted as confidential documents and such information will be available for public review once the grant of equipment authorization is issued. Best Regards Ms. Jenni Chun General Manager Samsung Electronics America, Inc. TEL: +1-973-808-6375 E-mail: [email protected]

A. Information to be displayed 1. The information that will be displayed on the e-label and information that will remain in the user manual is shown below: Information On E-label In Manual FCC ID number Yes Yes DoC logo Not Applicable Not Applicable 15.19 statement (“This device complies with part 15 of the FCC Rules. Operation is s ubject to the following two conditions: (1) This d evice may not cause harmful interference, and (2) this d evice must accept any interference received, including interference that may cause undesired operation.”) - Yes Class A / B Digital Device user manual statements1 - Yes DoC declaration1 Not Applicable Not Applicable Caution to the user that changes or modifications not expressly approved by the party responsib le for compliance could void the user's authority to operate the equipment1 - Yes Describe any other FCC regulatory - Yes Describe any other FCC regulatory information included in e-label 1 None Not Applicable If the e-label includes information typically included in the manual then the e-label shall clearly differentiate between information required to be on the device’s surface and information required to be in the manual – refer to 784748 D02 e labe lling v01 section II D 3(b) Images of the e-label screen are provided below: B.Access to the required information on the e-label 1.Users are able to access the information in no more t han three steps i n a device’s menu. The actual steps are: From the home screen: a) Click on Setti ngs Apps b) About phone c) Stat us No special access codes or permissions are required to go through the above steps beyond entering a user defined password to protect against unauthorized access to the device. 2. The information is stored on the device, no special a ccessories or supplemental plug-ins (e.g., a SIM/USIM card) are req uir ed to access the information. 3.Users are provided specific instructions on how to access the information. The information is provided in User manual.

Testing Laboratory TL-637 CERTIFICATION TEST REPORT Report Number. : 4789497384-E1V2 Applicant : SAMSUNG ELECTRONICS CO., LTD. 129 SAMSUNG-RO, YEONGTONG-GU, SUWON-SI, GYEONGGI-DO, 16677, KOREA Model : SM-F916B FCC ID : A3LSMF916B EUT Description : GSM/WCDMA/LTE Phone + BT/BLE, DTS/UNII a/b/g/n/ac/ax, UWB, WPT and NFC Test Standard(s) : FCC 47 CFR PART 15 SUBPART B Date Of Issue: July 28, 2020 Prepared by: UL Korea, Ltd. 26th floor, 152, Teheran-ro, Gangnam-gu Seoul, 06236, Korea Suwon Test Site: UL Korea, Ltd. Suwon Laboratory 218 Maeyeong-ro, Yeongtong-gu, Suwon-si, Gyeonggi-do, 16675, Korea TEL: (031) 337-9902 FAX: (031) 213-5433 REPORT NO: 4789497384-E1V2 DATE: JUL 28, 2020 FCC ID: A3LSMF916B Page 2 of 55 UL Korea, Ltd. Suwon Laboratory FORM ID: FCC_15B(04) 218 Maeyeong-ro, Yeongtong-gu, Suwon-si, Gyeonggi-do, 16675, Korea TEL: (031) 337-9902 FAX: (031) 213-5433 UL Korea, Ltd. Confidential This report shall not be reproduced except in full, without the written approval of UL Korea, Ltd. Revision History Rev. Issue Date Revisions Revised By V1 07/22/20 Initial issue Yeonhee Lim V2 07/28/20 Updated to address TCB’s question Yeonhee Lim REPORT NO: 4789497384-E1V2 DATE: JUL 28, 2020 FCC ID: A3LSMF916B Page 3 of 55 UL Korea, Ltd. Suwon Laboratory FORM ID: FCC_15B(04) 218 Maeyeong-ro, Yeongtong-gu, Suwon-si, Gyeonggi-do, 16675, Korea TEL: (031) 337-9902 FAX: (031) 213-5433 UL Korea, Ltd. Confidential This report shall not be reproduced except in full, without the written approval of UL Korea, Ltd. TABLE OF CONTENTS 1. ATTESTATION OF TEST RESULTS ................................................................................. 4 2. TEST METHODOLOGY ..................................................................................................... 5 3. FACILITIES AND ACCREDITATION ................................................................................. 5 4. CALIBRATION AND UNCERTAINTY ................................................................................ 6 4.1. MEASURING INSTRUMENT CALIBRATION ................................................................ 6 4.2. SAMPLE CALCULATION .............................................................................................. 6 4.3. MEASUREMENT UNCERTAINTY ................................................................................ 6 4.4. DECISION RULE .......................................................................................................... 6 5. EQUIPMENT UNDER TEST ............................................................................................... 7 5.1. DESCRIPTION OF EUT ................................................................................................ 7 5.2. TEST MODE ................................................................................................................. 7 5.3. WORST-CASE ORIENTATION AND MODE ................................................................. 8 5.4. DESCRIPTION OF TEST SETUP ................................................................................. 9 6. TEST AND MEASUREMENT EQUIPMENT ......................................................................10 7. APPLICABLE LIMIYS AND TEST RESULTS ...................................................................11 7.1. Above 1 GHz in the GSM850 .......................................................................................12 7.2. Above 1 GHz in the WCDMA Band 5 ...........................................................................18 7.3. Above 1 GHz in the LTE Band 12 ................................................................................20 7.4. Above 1 GHz in the LTE Band 13 ................................................................................26 7.5. Above 1 GHz in the LTE Band 26 ................................................................................28 7.6. Below 1 GHz in the GSM850 ........................................................................................34 7.7. Below 1 GHz in the WCDMA Band 5 ............................................................................40 7.8. Below 1 GHz in the LTE Band 12 .................................................................................42 7.9. Below 1 GHz in the LTE Band 13 .................................................................................48 7.10. Below 1 GHz in the LTE Band 26 .................................................................................50 REPORT NO: 4789497384-E1V2 DATE: JUL 28, 2020 FCC ID: A3LSMF916B Page 4 of 55 UL Korea, Ltd. Suwon Laboratory FORM ID: FCC_15B(04) 218 Maeyeong-ro, Yeongtong-gu, Suwon-si, Gyeonggi-do, 16675, Korea TEL: (031) 337-9902 FAX: (031) 213-5433 UL Korea, Ltd. Confidential This report shall not be reproduced except in full, without the written approval of UL Korea, Ltd. 1. ATTESTATION OF TEST RESULTS COMPANY NAME: SAMSUNG ELECTRONICS CO., LTD. EUT DESCRIPTION: GSM/WCDMA/LTE Phone + BT/BLE, DTS/UNII a/b/g/n/ac/ax, UWB, WPT and NFC MODEL NUMBER: SM-F916B SERIAL NUMBER: R3CN50JXSJR (RADIATED) DATE TESTED: JUL 07, 2020 – JUL 08, 2020; APPLICABLE STANDARDS STANDARD TEST RESULTS FCC PART 15B Pass UL Korea, Ltd. tested the above equipment in accordance with the requirements set forth in the above standards. All indications of Pass/Fail in this report are opinions expressed by UL Korea, Ltd. based on interpretations and/or observations of test results. Measurement Uncertainties were not taken into account and are published for informational purposes only. The test results show that the equipment tested is capable of demonstrating compliance with the requirements as documented in this report. Note: The results documented in this report apply only to the tested sample, under the conditions and modes of operation as described herein. This document may not be altered or revised in any way unless done so by UL Korea, Ltd. and all revisions are duly noted in the revisions section. Any alteration of this document not carr…

Text truncated - open the document above for the full version.

1. Appendix: UNLICENSED BAND SETUP PHOTOS(Conducted Test) 1) CONDUCTED RF MEASUREMENT SETUP (DTS, UNII, BLE) CONDUCTED TEST PHOTO 2) CONDUCTED RF MEASUREMENT SETUP (Bluetooth) BLUETOOTH TEST PHOTO 3) CONDUCTED RF MEASUREMENT SETUP (DFS) DFS TEST PHOTO 4) CONDUCTED RF MEASUREMENT SETUP (NFC Stability) NFC STABILITY TEST PHOTO 2. Appendix: UNLICENSED BAND SETUP PHOTOS(Radiated Test) 1) RADIATED RF MEASUREMENT SETUP (BELOW 1 GHz) BELOW 1 GHz FRONT TEST PHOTO BELOW 1 GHz REAR TEST PHOTO 2) RADIATED RF MEASUREMENT SETUP (ABOVE 1 GHz) ABOVE 1 GHz FRONT TEST PHOTO ABOVE 1 GHz REAR TEST PHOTO 3) RADIATED RF MEASUREMENT SETUP (NFC) FACE ON TEST PHOTO FACE OFF TEST PHOTO 4) RADIATED RF MEASUREMENT SETUP (WPT) FACE ON TEST PHOTO FACE OFF TEST PHOTO 5) RADIATED RF MEASUREMENT SETUP (UWB) UWB TEST PHOTO UWB TEST PHOTO 6) RADIATED RF MEASUREMENT SET-UP (Foldable & Axis) Open & X AXIS PHOTO Open & Y AXIS PHOTO Open & Z AXIS PHOTO Half-Folded & X AXIS PHOTO Half-Folded & Y AXIS PHOTO Half-Folded & Z AXIS PHOTO Full-Folded & X AXIS PHOTO Full-Folded & Y AXIS PHOTO Full-Folded & Z AXIS PHOTO 7) AC LINE CONDUCTED MEASUREMENT SETUP AC LINE CONDUCTED FRONT TEST PHOTO AC LINE CONDUCTED REAR TEST PHOTO 8) AC LINE CONDUCTED MEASUREMENT SETUP(WPT) AC LINE CONDUCTED FRONT TEST PHOTO(WPT) AC LINE CONDUCTED REAR TEST PHOTO(WPT) END OF TEST PHOTO

Project No. : LBE20200701 Mobile Phone: SM-F916B - 1/14- This report must not be reproduced, except in full, without written permission from Global CS Center. Form No.: SRA-TRF-46/11 APPENDIX – Test Setup and EUT photographs – Project No. : LBE20200701 Mobile Phone: SM-F916B - 2/14- This report must not be reproduced, except in full, without written permission from Global CS Center. Form No.: SRA-TRF-46/11 1. Photograph of Test Setup □ Conducted Disturbance [ Mode 1-2 , 4 : Front ] [ Mode 1-2, 4 : Rear ] Project No. : LBE20200701 Mobile Phone: SM-F916B - 3/14- This report must not be reproduced, except in full, without written permission from Global CS Center. Form No.: SRA-TRF-46/11 [ Mode 3 : Front ] [ Mode 3 : Rear ] Project No. : LBE20200701 Mobile Phone: SM-F916B - 4/14- This report must not be reproduced, except in full, without written permission from Global CS Center. Form No.: SRA-TRF-46/11 [ Mode 5 : Front ] [ Mode 5 : Rear ] Project No. : LBE20200701 Mobile Phone: SM-F916B - 5/14- This report must not be reproduced, except in full, without written permission from Global CS Center. Form No.: SRA-TRF-46/11 □ Radiated Disturbance for Below 1 GHz [ Mode 1 : Front ] [ Mode 1 : Rear ] Project No. : LBE20200701 Mobile Phone: SM-F916B - 6/14- This report must not be reproduced, except in full, without written permission from Global CS Center. Form No.: SRA-TRF-46/11 [ Mode 2, 4 : Front ] [ Mode 2, 4 : Rear ] Project No. : LBE20200701 Mobile Phone: SM-F916B - 7/14- This report must not be reproduced, except in full, without written permission from Global CS Center. Form No.: SRA-TRF-46/11 [ Mode 3 : Front ] [ Mode 3 : Rear ] Project No. : LBE20200701 Mobile Phone: SM-F916B - 8/14- This report must not be reproduced, except in full, without written permission from Global CS Center. Form No.: SRA-TRF-46/11 [ Mode 5 : Front ] [ Mode 5 : Rear ] Project No. : LBE20200701 Mobile Phone: SM-F916B - 9/14- This report must not be reproduced, except in full, without written permission from Global CS Center. Form No.: SRA-TRF-46/11 [ Mode 6 : Front ] [ Mode 6 : Rear ] Project No. : LBE20200701 Mobile Phone: SM-F916B - 10/14- This report must not be reproduced, except in full, without written permission from Global CS Center. Form No.: SRA-TRF-46/11 □ Radiated Disturbance for Above 1 GHz [ Mode 1 : Front ] [ Mode 1 : Rear ] Project No. : LBE20200701 Mobile Phone: SM-F916B - 11/14- This report must not be reproduced, except in full, without written permission from Global CS Center. Form No.: SRA-TRF-46/11 [ Mode 2, 4 : Front ] [ Mode 2, 4 : Rear ] Project No. : LBE20200701 Mobile Phone: SM-F916B - 12/14- This report must not be reproduced, except in full, without written permission from Global CS Center. Form No.: SRA-TRF-46/11 [ Mode 3 : Front ] [ Mode 3 : Rear ] Project No. : LBE20200701 Mobile Phone: SM-F916B - 13/14- This report must not be reproduced, except in full, without written permission from Global CS Center. Form No.: SRA-TRF-46/11 [ Mode 5 : Front ] [ Mode 5 : Rear ] Project No. : LBE20200701 Mobile Phone: SM-F916B - 14/14- This report must not be reproduced, except in full, without written permission from Global CS Center. Form No.: SRA-TRF-46/11 [ Mode 6 : Front ] [ Mode 6 : Rear ]