Text extracted from the exhibit documents filed with the FCC. Open a document above to read the original.
47 CFR §2.911 (d)(7) Agent Designation Attestation Date: 04-10-2026 FCC ID: A3LSMF971U To: Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Samsung Electronics Co., Ltd. (“the applicant”) as required by section 2.911(d)(7), designates the following agent, located in the United States, for purposes of acting as the applicant’s agent for service of process. The applicant acknowl edges that they will maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. The applicant further acknowledges their responsibility to inform the FCC whenever the agent information changes. U. S. Agent Information: Contact Person : Ms. Jenni Chun Company Name : Samsung Electronics Co., Ltd. Company Address : 19 Chapin Rd., Building D, Pine Brook, NJ 07058 Email : [email protected] FRN : 0027908797 Sincerely yours, Name: Ms. Jenni Chun Job Title: Head of Regulatory & Environmental Affairs Company Name: Samsung Electronics Co., Ltd.
Date : 04/10/2026 Federal Communications Commissions Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 RE : CFR 47 §2.911 (d)(5) Attestation FCC ID: A3LSMF971U FRN : 0027908797 1.Samsung Electronics Co., Ltd. (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. 2.Samsung Electronics Co., Ltd. (“the applicant”) certifies that, the device does not have cybersecurity and / or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors and assignees, identified on the Covered List installed on the device, nor will it be installed by the applicant anytime after certification. 3.Samsung Electronics Co., Ltd. (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment and is not an affiliate or subsidiary of an entity identified on the Covered List. Sincerely yours, Name: Ms. Jenni Chun Job Title: General Manager Regulatory & Environmental Affairs Company Name: Samsung Electronics Co., Ltd.
April.10th, 2026 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Subject: FCC ID: Request for Confidentiality A3LSMF971U To Whom It May Concern: Pursuant to the provisions of Sections 0.457 and 0.459 of the Commission’s rules (47 CFR §§ 0. 457, 0.459), we are requesting the Commission to withhold the following attachments as confidential document from public disclosure indefinitely. Schematics Block Diagram Operational Description Parts List Tune-Up Procedure PED Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In additional to above mentioned documents, pursuant to Public Notice DA 04-1705 of the Commission’s policy, in order to comply with the marketing regulations in 47 CFR § 2.803 and the importation rules in 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We are requesting the commission to grant short-term confidentiality request on the following attachments until 180 days External Photos Internal Photos Test Setup Photos User Manual It is our understanding that all measurement test reports, FCC ID label format and correspondence during certification review process cannot be granted as confidential documents and such information will be available for public review once the grant of equipment authorization is issued. Best Regards Ms. Jenni Chun General Manager Samsung Electronics America, Inc. TEL: +1-973-808-6375 E-mail: [email protected]
Date: April.10th,2026 Federal Communications Commission, Equipment Authorization Division, 7435 Oakland Mills Road, Columbia, MD 21046 To whom it may concern: I, the undersigned, hereby authorize UL Korea, Ltd. Suwon Laboratory, to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by UL Korea, Ltd. Suwon Laboratory on our behalf shall have the same effect as acts of our own. In authorizing UL Korea as our agent, we still recognize that we are responsible to: a) comply with the relevant provisions of the certification program; b) make all necessary arrangements for the conduct of the evaluation, including provision for examining documentation and access to all areas, records (including internal audit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment, surveillance, reassessment) and resolution of complaints; c) make claims regarding certification only in respect of the scope for which certification has been granted; d) do not use our product certification in such a manner as to bring the Certification Division into disrepute and not make any statement regarding our product certification which the Certification Division may consider misleading or unauthorized; e) upon suspension or cancellation of certification, discontinue use of all advertising matter that contains any reference thereto and return any certification documents as required by the Certification Division; f) use certification only to indicate the products are certified as being in conformity with specified standards; g) endeavor to ensure that no certificate or report nor any part thereof is used in a misleading manner; h) ensure that any reference to our product certification in communication media such as documents, brochures or advertising, complies with the requirements of the Certification Division; i) keep a record of all complaints made known to the us relating to the product’s compliance with requirements of the relevant standard and to make these records available to the when requested; j) take appropriate action with respect to such complaints and any deficiencies found in products or services that affect compliance with the requirements for certification; k) document the actions taken. l) the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). This authorization is valid until further written notice from the applicant. Sincerely Yours, Ms. Jenni Chun General Manager Samsung Electronics America, Inc. TEL: +1-973-808-6375 E-mail: [email protected]
A3LSMF971U FCC certification FCC ID: A3LSMF971U Description of E-label on the A3LSMF971U Date: April 3, 2026 FCC ID: A3LSMF971U This model is applied E-label, please find description of E-label below. 1. FCC ID (E-label): Settings > About Phone > Status Information <Device Display Screen> 2. FCC ID on the Quick Start Guide The FCC has granted an Equipment Authorization for this model device based on the compliance of all reported SAR levels with the FCC RF exposure guide lines. This device has a FCC ID number [Model Number: SM-F971U, SM-F971U1] and the specific SAR levels for this device can be found at the following. FCC website: www.fcc.gov/oet/ea/ The SAR information for this device can be found on Samsung’s website: www.samsung.com/sar
SAMSUNG ELECTRONICS CO., LTD 129, Samsung-ro, Yeongtong-gu Suwon-si, Gyeonggi-do, 443-742 Korea April 3, 2026 Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 SUBJECT: Label Statement FCC ID: A3LSMF971U To whom it may concern We hereby provide the following attestations according to CFR 2.935 and FCC KDB 784748 D02: At the time of purchase, the FCC ID is readily and physically visible to the purchaser on the exterior package per CFR 2.935(f). The FCC ID will be readily legible without the aid of magnification according to CFR 2.935(d). The literature in the package describes how to access the electronic display to find the FCC ID per CRF 2.935(b) and FCC KDB 784748. Per CFR 2.935(c), the user will be able to access this information within a maximum of 3 steps. The user will be able to access this information without a SIM card, special accessories or supplemental plug-ins. Per CFR 2.935(e), We, Samsung have programmed the e-label and it is not able to be modified by any third party. Per CFR 2.935(f), the FCC ID will be able to survive normal shipping and handling so it is visible for inspection at the time of import. Should you have any questions or comments concerning the above, please contact the undersigned. Sincerely Yours, Jenni Chun/ General Manager Samsung Electronics America. Inc Address: 19 Chapin Rd., Building D Pine Brook, NJ 07058 Tel: 1-973-808-6375
Testing Laboratory TL-637 FCC 47 CFR § 2.1093 IEEE Std 1528-2013 RF EXPOSURE SUMMARY REPORT FOR GSM/WCDMA/LTE/NR/NTN Phone + BT/BLE, DTS/UNII a/b/g/n/ac/ax/be, NFC, UWB and WPT MODEL NUMBER: SM-F971U, SM-F971U1 FCC ID: A3LSMF971U REPORT NUMBER: S-4792147575-S1V2 ISSUE DATE: 2026-04-29 Prepared for SAMSUNG ELECTRONICS CO., LTD. 129 SAMSUNG-RO, YEONGTONG-GU, SUWON-SI, GYEONGGI-DO, 16677, KOREA Prepared by UL Korea, Ltd. 26th floor, 152, Teheran-ro, Gangnam-gu Seoul, 06236, Korea Suwon Test Site: UL Korea, Ltd. Suwon Laboratory 218 Maeyeong-ro, Yeongtong-gu, Suwon-si, Gyeonggi-do, 16675, Korea TEL: (031) 337-9902 FAX: (031) 213-5433 Report No.: S-4792147575-S1V2 Issue Date: 2026-04-29 Page 2 of 12 UL Korea, Ltd. Suwon Laboratory Doc. No.: 1.0(04) This report shall not be reproduced except in full, without the written approval of UL Korea, Ltd. Revision History Rev. Date Revisions Revised By V1 2026-04-23 Initial Issue -- V2 2026-04-29 Revised IPD and TER value in Sec.1 & Sec.5 Jeongyeon Won Report No.: S-4792147575-S1V2 Issue Date: 2026-04-29 Page 3 of 12 UL Korea, Ltd. Suwon Laboratory Doc. No.: 1.0(04) This report shall not be reproduced except in full, without the written approval of UL Korea, Ltd. Table of Contents 1. Attestation of Test Results ......................................................................................................... 4 2. Strategy for Compliance Demonstration ................................................................................... 5 2.1. RF Exposure Evaluation Strategy .............................................................................................. 5 2.2. Nomenclature ............................................................................................................................ 6 2.3. Report Compositions ................................................................................................................. 6 3. Time Averaging Algorithm .......................................................................................................... 7 3.1. Algorithm Description ................................................................................................................. 7 3.2. Basic concept of the algorithm ................................................................................................... 8 3.3. Configurable Parameters ......................................................................................................... 10 4. DUT Description ........................................................................................................................ 11 5. RF Exposure Compliance Summary ........................................................................................ 12 Report No.: S-4792147575-S1V2 Issue Date: 2026-04-29 Page 4 of 12 UL Korea, Ltd. Suwon Laboratory Doc. No.: 1.0(04) This report shall not be reproduced except in full, without the written approval of UL Korea, Ltd. 1. Attestation of Test Results Applicant Name SAMSUNG ELECTRONICS CO.,LTD. FCC ID A3LSMF971U Model Number SM-F971U, SM-F971U1 Applicable Standards FCC 47 CFR § 2.1093 IEEE Std 1528-2013 IEC/IEEE Std 63195-1: 2022 Published RF exposure KDB procedures Exposure Category SAR Limits (W/Kg) Power Density Limits (mW/cm 2 ) TER limits (Total Exposure Ratio) 1g SAR 10g SAR Incident PD (IPD) General population / Uncontrolled exposure 1.6 4.0 1.0 1.0 RF Exposure Conditions The Highest Reported RF Exposure Level Standalone - 1g (W/kg) 1.23 Standalone - 10g (W/kg) 1.50 Standalone – IPD (mW/cm 2 - 4cm 2 ) 0.98 Simultaneous Tx – 1g (W/kg) 1.59 Simultaneous Tx – 10g (W/kg) 1.92 TER (Total Exposure Ratio) 0.99 Test Results Pass UL Korea, Ltd. tested the above equipment in accordance with the requirements set forth in the above standards. All indications of Pass/Fail in this report are opinions expressed by UL Korea, Ltd. based on interpretations and/or observations of test results. Measurement Uncertainties were not taken into account and are published for informational purposes only. The test results show that the equipment tested is capable of demonstrating compliance with the requirements as documented in this report. Note: The results documented in this report apply only to the tested sample, under the conditions and modes of operation as described herein. This document may not be altered or revised in any way unless done so by UL Korea, Ltd. and all revisions are duly noted in the revisions section. Any alteration of this document not carried out by UL Korea, Ltd. will constitute fraud and shall nullify the document. This report must not be used by the client to claim product certification, approval, or endorsement by IAS, any agency of the Federal Government, or any agency of any government. Approved & Released By: Prepared By: Justin Park Operations Leader UL Korea, Ltd. Suwon Laboratory Jeongyeon Won Laboratory Engineer Associate UL Korea, Ltd. Suwon Laboratory Report No.: S-4792147575-S1V2 Issue Date: 2026-04-29 Page 5 of 12 UL Korea, Ltd. Suwon Laboratory Doc. No.: 1.0(04) This report shall not be reproduced except in full, without the written approval of UL Korea, Ltd. 2. Strategy for Compliance Demonstration 2.1. RF Exposure Evaluation Strategy The FCC RF exposure limits defined based on time-averaged RF exposure. The device under test (DUT) uses the Qualcomm Smart Transmit feature to control and manage transmitting power in real time and to ensure at all times the time-averaged RF exposure is in compliance with the FCC requirement for WWAN/WLAN/BT/NTN operations. Additionally, this device supports NFC/UWB technologies but the output power of these modems is not controlled by the smart transmit algorithm. Demonstrating compliance of DUT enabled with Qualcomm Smart Transmit feature is completed in three parts: 0. RF Exposure Compliance Test Report Part.0: SAR Characterization and PD Characterization The SAR and PD Characterization, denote as SAR Char and PD Char, determines the power limit…
Text truncated - open the document above for the full version.
1/8 cDASY6 Module WPT Measurement Report Device under test Info: Serial number: Scenario: Tool info DASY software version: cDASY6 Module WPT 3.2.0.6673 Probe model, serial no. and configuration date: MAGPy-8H3D+E3Dv2, WP000107, 2025/08/12 Software version: 3.2.9, backend: 3.2.20 Hardware version: FPGA: 100, FW: N/A Scan info Center location: x: 2.11 mm, y: -14.35 mm, z: 34.93 mm Dimensions: x: 212.9 mm, y: 256.3 mm, z: 36.7 mm Resolution: x: 7.33 mm, y: 7.33 mm, z: 7.33 mm Completed on: 2026/03/09 19:20:05 Measurement results Maximum H-field [rms]: magnitude:2.38 A/m x: 81.39 mA/m, y: 288.24 mA/m, z: 2.36 A/m Maximum H-field location relative to DUT: x: -3.67 mm, y: 55.00 mm, z: 8.50 mm Maximum E-field [rms]: magnitude:11.88 V/m x: 280.28 mV/m, y: 727.86 mV/m, z: 11.86 V/m Maximum E-field location relative to DUT: x: 7.33 mm, y: -44.00 mm, z: 0.00 m Distance to -20.0 dB boundary: 52.88 mm Offset relative to DUT: x: 0.00 m, y: 0.00 m, z: 1.00 mm H-field magnitude [rms] at center locationH-field magnitude [rms] at lowest plane Incident fields and induced fields in the homogeous phantom at the peak frequency ( f = 112.48 kHz, σ = 0.750 S/m, tissue density = 1,000 kg/m 3 ) Peak incident fields [rms] Peak E ind [V/m, rms] Peak J ind [A/m 2 , rms ] psSAR [mW/kg] H-field extent Distance [mm] H inc [A/m]E inc [V/m] Cube avg.LocalLine avg. Surface avg.1g avg.10g avg. -20 dB radius [mm] 0.00 3.6211.90.02490.02520.02530.01693.11e-41.92e-474.6 Compliance evaluation (Field values at the peak frequency) (f=112.48 kHz, total field evaluation, coverage evaluation) ICNIRP 2010/2020ICNIRP 1998IEEE 2019FCCHC Code 6 RL [rms]BR [rms]RL [rms]BR [rms]ERL [rms]DRL [rms]MPE [rms]BR [rms]RL [rms]BR [rms] Distance pH inc pE inc pE indpsSAR pH inc pE inc pJ indpsSAR pH inc pE inc pE indpsSAR pH inc pE inc pE indpsSAR pH inc pE inc pE indpsSAR [mm][A/m][V/m][V/m][mW/kg][A/m][V/m] [A/m 2 ] [mW/kg][A/m][V/m][V/m][mW/kg][A/m][V/m][V/m][mW/kg][A/m][V/m][V/m][mW/kg] 0.00 3.6211.90.148 1.93e- 4 3.6211.90.0172 1.93e- 4 3.6211.90.0808 1.93e- 4 3.6211.9N/A 3.11e- 4 3.6211.90.211 3.11e- 4 Coverage factors: w E ind, cube avg. = [5.92], w E ind, local = [8.36], w E ind, line avg. = [3.18] Compliance evaluation (Exposure ratios) (with multi-frequency enhancement, total field evaluation, coverage evaluation) ICNIRP 2010/2020ICNIRP 1998IEEE 2019FCCHC Code 6 RLBRRLBRERLDRLMPEBRRLBR Distance [mm] pH inc pE inc pE indpsSAR pH inc pE inc pJ indpsSAR pH inc pE inc pE indpsSAR pH inc pE inc pE indpsSAR pH inc pE inc pE indpsSAR NS TH NS TH NS TH N/A N/ANS TH NS TH NS TH NS TH N/A N/AN/ATH NS TH NS TH NS TH 0.00 0.17 0.08 0.34 0.01 <0.01<0.010.72 0.32 0.08 <0.010.02 0.01 0.05 0.01 <0.01<0.012.22 0.05 N/A <0.010.04 0.56 0.34 N/A 0.01 <0.01 Coverage factors: w E ind, cube avg. = [5.92], w E ind, local = [8.36], w E ind, line avg. = [3.18] not set not set not set Warnings Sign Vector potential Boundary effect 7%31%62% 2/8 cDASY6 Module WPT Measurement Report Device under test Info: Serial number: Scenario: Tool info DASY software version: cDASY6 Module WPT 3.2.0.6673 Probe model, serial no. and configuration date: MAGPy-8H3D+E3Dv2, WP000107, 2025/08/12 Software version: 3.2.9, backend: 3.2.20 Hardware version: FPGA: 100, FW: N/A Scan info Center location: x: -16.52 mm, y: -32.96 mm, z: 28.18 mm Dimensions: x: 301.0 mm, y: 301.0 mm, z: 36.6 mm Resolution: x: 7.33 mm, y: 7.33 mm, z: 7.33 mm Completed on: 2026/03/10 14:41:51 Measurement results Maximum H-field [rms]: magnitude:4.73 A/m x: 786.63 mA/m, y: 515.59 mA/m, z: 4.63 A/m Maximum H-field location relative to DUT: x: -11.00 mm, y: -33.00 mm, z: 8.50 mm Maximum E-field [rms]: magnitude:12.80 V/m x: 890.41 mV/m, y: 1.02 V/m, z: 12.73 V/m Maximum E-field location relative to DUT: x: -44.00 mm, y: 0.00 m, z: 0.00 m Distance to -20.0 dB boundary: 51.85 mm Offset relative to DUT: x: 0.00 m, y: 0.00 m, z: 1.00 mm H-field magnitude [rms] at center locationH-field magnitude [rms] at lowest plane Incident fields and induced fields in the homogeous phantom at the peak frequency ( f = 112.65 kHz, σ = 0.750 S/m, tissue density = 1,000 kg/m 3 ) Peak incident fields [rms] Peak E ind [V/m, rms] Peak J ind [A/m 2 , rms ] psSAR [mW/kg] H-field extent Distance [mm] H inc [A/m]E inc [V/m] Cube avg.LocalLine avg. Surface avg.1g avg.10g avg. -20 dB radius [mm] 0.00 8.1312.80.05040.05150.05140.03351.18e-36.93e-460.4 Compliance evaluation (Field values at the peak frequency) (f=112.65 kHz, total field evaluation, coverage evaluation) ICNIRP 2010/2020ICNIRP 1998IEEE 2019FCCHC Code 6 RL [rms]BR [rms]RL [rms]BR [rms]ERL [rms]DRL [rms]MPE [rms]BR [rms]RL [rms]BR [rms] Distance pH inc pE inc pE indpsSAR pH inc pE inc pJ indpsSAR pH inc pE inc pE indpsSAR pH inc pE inc pE indpsSAR pH inc pE inc pE indpsSAR [mm][A/m][V/m][V/m][mW/kg][A/m][V/m] [A/m 2 ] [mW/kg][A/m][V/m][V/m][mW/kg][A/m][V/m][V/m][mW/kg][A/m][V/m][V/m][mW/kg] 0.00 8.1312.80.288 6.93e- 4 8.1312.80.0338 6.93e- 4 8.1312.80.159 6.93e- 4 8.1312.8N/A 1.18e- 3 8.1312.80.415 1.18e- 3 Coverage factors: w E ind, cube avg. = [5.71], w E ind, local = [8.06], w E ind, line avg. = [3.09] Compliance evaluation (Exposure ratios) (with multi-frequency enhancement, total field evaluation, coverage evaluation) ICNIRP 2010/2020ICNIRP 1998IEEE 2019FCCHC Code 6 RLBRRLBRERLDRLMPEBRRLBR Distance [mm] pH inc pE inc pE indpsSAR pH inc pE inc pJ indpsSAR pH inc pE inc pE indpsSAR pH inc pE inc pE indpsSAR pH inc pE inc pE indpsSAR NS TH NS TH NS TH N/A N/ANS TH NS TH NS TH NS TH N/A N/AN/ATH NS TH NS TH NS TH 0.00 0.43 0.21 0.38 0.02 0.02 <0.011.8 0.38 0.17 <0.010.06 0.03 0.05 0.01 <0.01<0.015.06 0.05 N/A <0.010.10 1.39 0.38 N/A 0.03 <0.01 Coverage factors: w E ind, cube avg. = [5.71], w E ind, local = [8.06], w E ind, line avg. = [3.09] not set not set not set Warnings Sign Vector potential Boundary effect 10%15%24% 3/8 cDASY6 Module WPT Measurement Report Device under test Info: Serial number: Scenario: Tool info DASY software version: cDASY6 Module WPT 3.2.0.6673 Probe model,…
Text truncated - open the document above for the full version.
1/2 cDASY6 Module WPT Measurement Report Device under test Info: Serial number: Scenario: Tool info DASY software version: cDASY6 Module WPT 3.2.0.6673 Probe model, serial no. and configuration date: MAGPy-8H3D+E3Dv2, WP000107, 2025/08/12 Software version: 3.2.9, backend: 3.2.20 Hardware version: FPGA: 100, FW: N/A Scan info Center location: x: -2.04 mm, y: 70.11 mm, z: 45.39 mm Dimensions: x: 124.6 mm, y: 124.9 mm, z: 36.7 mm Resolution: x: 7.33 mm, y: 7.33 mm, z: 7.33 mm Completed on: 2026/03/20 15:14:09 Measurement results Maximum H-field [rms]: magnitude:122.75 A/m x: 6.49 A/m, y: 23.58 A/m, z: 120.29 A/m Maximum H-field location relative to DUT: x: -3.67 mm, y: -3.67 mm, z: 8.50 mm Maximum E-field [rms]: magnitude:41.15 V/m x: 11.50 V/m, y: 4.65 V/m, z: 39.23 V/m Maximum E-field location relative to DUT: x: -29.33 mm, y: 14.67 mm, z: 0.00 m Distance to -20.0 dB boundary: 37.39 mm Offset relative to DUT: x: 0.00 m, y: 0.00 m, z: 1.00 mm H-field magnitude [rms] at center locationH-field magnitude [rms] at lowest plane Incident fields and induced fields in the homogeous phantom at the peak frequency ( f = 400.00 kHz, σ = 0.750 S/m, tissue density = 1,000 kg/m 3 ) Peak incident fields [rms] Peak E ind [V/m, rms] Peak J ind [A/m 2 , rms ] psSAR [mW/kg] H-field extent Distance [mm] H inc [A/m]E inc [V/m] Cube avg.LocalLine avg. Surface avg.1g avg.10g avg. -20 dB radius [mm] 0.00 23941.13.863.963.952.455.973.0839.5 Compliance evaluation (Field values at the peak frequency) (f=400.00 kHz, total field evaluation) ICNIRP 2010/2020ICNIRP 1998IEEE 2019FCCHC Code 6 RL [rms]BR [rms]RL [rms]BR [rms]ERL [rms]DRL [rms]MPE [rms]BR [rms]RL [rms]BR [rms] Distance pH inc pE inc pE indpsSAR pH inc pE inc pJ indpsSAR pH inc pE inc pE indpsSAR pH inc pE inc pE indpsSAR pH inc pE inc pE indpsSAR [mm][A/m][V/m][V/m][mW/kg][A/m][V/m] [A/m 2 ] [mW/kg][A/m][V/m][V/m][mW/kg][A/m][V/m][V/m][mW/kg][A/m][V/m][V/m][mW/kg] 0.00 23941.13.863.0823941.12.453.0823941.13.953.0823941.1N/A5.9723941.13.965.97 Compliance evaluation (Exposure ratios) (with multi-frequency enhancement, total field evaluation) ICNIRP 2010/2020ICNIRP 1998IEEE 2019FCCHC Code 6 RLBRRLBRERLDRLMPEBRRLBR Distance [mm] pH inc pE inc pE indpsSAR pH inc pE inc pJ indpsSAR pH inc pE inc pE indpsSAR pH inc pE inc pE indpsSAR pH inc pE inc pE indpsSAR NS TH NS TH NS TH N/A N/ANS TH NS TH NS TH NS TH N/A N/AN/ATH NS TH NS TH NS TH 0.00 11.4 19.5 202.044.5 0.11 <0.01131.0232.04.83 <0.011.47 2.63 27.3 123.00.07 <0.01147.083.6 N/A <0.012.66 131.0202.0N/A 0.11 <0.01 not set not set not set Warnings Sign Vector potential Boundary effect 1%9%29% Document generated at 2026/03/20 15:16:18, simulation performed at 2026/03/20 15:15:01 using Sim4Life version 9.0.0.18820 2/2 cDASY6 Module WPT Measurement Report Device under test Info: Serial number: Scenario: Tool info DASY software version: cDASY6 Module WPT 3.2.0.6673 Probe model, serial no. and configuration date: MAGPy-8H3D+E3Dv2, WP000107, 2025/08/12 Software version: 3.2.9, backend: 3.2.20 Hardware version: FPGA: 100, FW: N/A Scan info Center location: x: -2.55 mm, y: 71.83 mm, z: 45.49 mm Dimensions: x: 389.0 mm, y: 476.0 mm, z: 36.7 mm Resolution: x: 7.33 mm, y: 7.33 mm, z: 7.33 mm Completed on: 2026/03/23 09:57:18 Measurement results Maximum H-field [rms]: magnitude:146.54 A/m x: 143.14 A/m, y: 1.04 A/m, z: 31.37 A/m Maximum H-field location relative to DUT: x: -91.67 mm, y: 3.67 mm, z: 8.50 mm Maximum E-field [rms]: magnitude:251.66 V/m x: 11.01 V/m, y: 3.09 V/m, z: 251.40 V/m Maximum E-field location relative to DUT: x: -88.00 mm, y: -161.33 mm, z: 0.00 m Distance to -20.0 dB boundary: 73.33 mm Offset relative to DUT: x: 0.00 m, y: 0.00 m, z: 1.00 mm H-field magnitude [rms] at center locationH-field magnitude [rms] at lowest plane Incident fields and induced fields in the homogeous phantom at the peak frequency ( f = 85.00 kHz, σ = 0.750 S/m, tissue density = 1,000 kg/m 3 ) Peak incident fields [rms] Peak E ind [V/m, rms] Peak J ind [A/m 2 , rms ] psSAR [mW/kg] H-field extent Distance [mm] H inc [A/m]E inc [V/m] Cube avg.LocalLine avg. Surface avg.1g avg.10g avg. -20 dB radius [mm] 0.00 2242523.803.843.852.688.406.23181 Compliance evaluation (Field values at the peak frequency) (f=85.00 kHz, total field evaluation) ICNIRP 2010/2020ICNIRP 1998IEEE 2019FCCHC Code 6 RL [rms]BR [rms]RL [rms]BR [rms]ERL [rms]DRL [rms]MPE [rms]BR [rms]RL [rms]BR [rms] Distance pH inc pE inc pE indpsSAR pH inc pE inc pJ indpsSAR pH inc pE inc pE indpsSAR pH inc pE inc pE indpsSAR pH inc pE inc pE indpsSAR [mm][A/m][V/m][V/m][mW/kg][A/m][V/m] [A/m 2 ] [mW/kg][A/m][V/m][V/m][mW/kg][A/m][V/m][V/m][mW/kg][A/m][V/m][V/m][mW/kg] 0.00 2242523.816.232242522.686.232242523.856.23224252N/A8.402242523.848.40 Compliance evaluation (Exposure ratios) (with multi-frequency enhancement, total field evaluation) ICNIRP 2010/2020ICNIRP 1998IEEE 2019FCCHC Code 6 RLBRRLBRERLDRLMPEBRRLBR Distance [mm] pH inc pE inc pE indpsSAR pH inc pE inc pJ indpsSAR pH inc pE inc pE indpsSAR pH inc pE inc pE indpsSAR pH inc pE inc pE indpsSAR NS TH NS TH NS TH N/A N/ANS TH NS TH NS TH NS TH N/A N/AN/ATH NS TH NS TH NS TH 0.00 10.7 N/A 8.55 N/A 0.33 N/A 44.9 7.18 15.8 N/A 1.38 N/A 1.16 N/A 0.22 N/A 2.49 4.36 N/A N/A 2.49 N/A 8.55 N/A 0.34 N/A not set not set not set Warnings Sign Vector potential Boundary effect 1%85%36% Document generated at 2026/04/14 07:57:45, simulation performed at 2026/03/23 09:59:56 using Sim4Life version 9.0.0.18820
Testing Laboratory TL-637 FCC 47 CFR § 2.1093 RF EXPOSURE EVALUATION REPORT (Wireless Power Transfer) FOR GSM/WCDMA/LTE/NR/NTN Phone + BT/BLE, DTS/UNII a/b/g/n/ac/ax/be, NFC, UWB and WPT MODEL NUMBER: SM-F971U, SM-F971U1 FCC ID: A3LSMF971U REPORT NUMBER: S-4792147575-S6V2 ISSUE DATE: 2026-04-28 Prepared for SAMSUNG ELECTRONICS CO., LTD. 129 SAMSUNG-RO, YEONGTONG-GU, SUWON-SI, GYEONGGI-DO, 16677, KOREA Prepared by UL Korea, Ltd. 26th floor, 152, Teheran-ro, Gangnam-gu Seoul, 06236, Korea Suwon Test Site: UL Korea, Ltd. Suwon Laboratory 218 Maeyeong-ro, Yeongtong-gu, Suwon-si, Gyeonggi-do, 16675, Korea TEL: (031) 337-9902 FAX: (031) 213-5433 Report No.: S-4792147575-S6V2 Issue Date: 2026-04-28 Page 2 of 18 UL Korea, Ltd. Suwon Laboratory Doc. No.: 1.0(04) This report shall not be reproduced except in full, without the written approval of UL Korea, Ltd. Revision History Rev. Date Revisions Revised By V1 2026-04-23 Initial Issue -- V2 2026-04-28 Revised Date Test in Sec. 1. Revised Sec. 4.2. Revised Equipment & Peripherals info. in Sec. 6. Revised System verification Results in Sec. 8. Removed Scaling factor calculation Section. Revised H-field and 1-g SAR Results Table in Sec. 9. JeongYeon Won Report No.: S-4792147575-S6V2 Issue Date: 2026-04-28 Page 3 of 18 UL Korea, Ltd. Suwon Laboratory Doc. No.: 1.0(04) This report shall not be reproduced except in full, without the written approval of UL Korea, Ltd. Table of Contents 1. Attestation of SAR Characterization .......................................................................................... 4 2. Test Specification, Methods and Procedures ............................................................................ 5 3. Facilities and Accreditation ........................................................................................................ 5 4. H-field Measurement System & Test Equipment ....................................................................... 6 4.1. H-field Measurement System ...................................................................................................... 6 4.2. Simulated SAR based on DASY module WPT S/W ................................................................... 9 4.3. Test Equipment ........................................................................................................................... 9 5. Measurement Uncertainty ......................................................................................................... 10 5.1 Incident E/H-field Measurement Uncertainty ................................................................................. 10 5.2 1-g SAR Simulation Uncertainty ................................................................................................... 11 6. DUT Information ........................................................................................................................ 12 7. RF Exposure Conditions (Test Configurations) ...................................................................... 14 8. System verification ................................................................................................................... 15 9. H-field and 1-g SAR Results ..................................................................................................... 17 Appendixes .......................................................................................................................................... 18 S-4792147575-S6 FCC Report RFx WPT App A Photos ...............................................................…
Text truncated - open the document above for the full version.
19 Chapin Rd., Building D · Pine Brook, 07058 · United States
| # | Rule Parts | Frequency Range | Power Output |
|---|---|---|---|
| 1 | 15C | 0.11 MHz - 0.148 MHz | - |
Bluetooth Headset
Equipment Class
DTS - Digital Transmission SystemPortable Handset
Equipment Class
CXX - Communications Rcvr for use w/ licensed Tx and CBsPortable Handset
Equipment Class
6VL - 15E 6 GHZ Very Low Power DeviceBT,BLE Tablet DTS,UNII a,b,g,n,ac,ax,be and digitizer
Equipment Class
DTS - Digital Transmission SystemPortable Handset
Equipment Class
6CD - 15E 6 GHz Low Power Dual Client