A3LSMG130HNGSM/WCDMA Phone + Bluetooth, WLAN 2.4GHz b/g/n & NFC

User manual SM-G130HN D Draft 6.1 2012-09-08 Only for Approval using this manual This user manual has been specially designed to guide you through the functions and features of your mobile phone. To get started quickly, refer to “introducing your mobile phone, Instructional icons Before you start, familiarise yourself with the icons you will see in this manual: Warning—situations that could cause injury to yourself or others Caution—situations that could cause damage to your phone or other equipment Note—notes, usage tips, or additional information Refer to—pages with related information; for example: p. 12 (represents “see page 12”) Õ Followed by—the order of options or menus you must select to perform a step; for example: In Menu mode, select Messages Õ Create new message (represents Messages, followed by Create new message) [ ] Square brackets—phone keys; for example: [ ](represents the Power/ Menu exit key) < > Angled brackets—softkeys that control different functions at each screen; for example: <OK> (represents the OK softkey) Copyright information Rights to all technologies and products that comprise this device are the property of their respective owners:  Bluetooth ® is a registered trademark of the Bluetooth SIG, Inc. worldwide  Java™ is a trademark of Sun Microsystems, Inc.  Windows Media Player ® is a registered trademark of Microsoft Corporation. contents safety and usage information Safety warnings Safety precautions Important usage information introducing your mobile phone Unpack .. Phone layout Keys Display Icons assembling and preparing your mobile phone Install the SIM card and battery Charge the battery using basic functions Turn your phone on and off Access menus Customise your phone Use basic call functions Send and view messages Add and find contacts troubleshooting safety and usage information Comply with the following precautions to avoid dangerous or illegal situations and ensure peak performance of your mobile phone. Safety warnings Keep your phone away from small children and pets Keep your phone and all accessories out of the reach of small children or animals. Small parts may cause choking or serious injury if swallowed. Protect your hearing Excessive exposure to sound at high volumes can cause hearing damage. Always turn the volume down before plugging the earphones into an audio source and use only the minimum volume setting necessary to hear your conversation or music. Install mobile phones and equipment with caution Ensure that any mobile phones or related equipment installed in your vehicle are securely mounted. Avoid placing your phone and accessories near or in an air bag deployment area. Improperly installed wireless equipment can cause serious injury when air bags inflate rapidly. Handle and dispose of batteries and chargers with care  Use only Samsung-approved batteries and chargers specifically designed for your phone. Incompatible batteries and chargers can cause serious injuries or damage to your phone.  Never dispose of batteries or phones in a fire. Follow all local regulations when disposing used batteries or phones.  Never place batteries or phones on or in heating devices, such as microwave ovens, stoves, or radiators. Batteries may explode when overheated.  Never crush or puncture the battery. Avoid exposing the battery to high external pressure, which can lead to an internal short circuit and overheating. Avoid interference with pacemakers Maintain a minimum of 15 cm (6 inches) between mobile phones and pacemakers to avoid potential interference, as recommended by manufacturers and the independent research group, Wireless Technology Research. If you have any reason to suspect that your phone is interfering with a pacemaker or other medical device, turn off the phone immediately and contact the manufacturer of the pacemaker or medical device for guidance. Turn off the phone in potentially explosive environments Do not use your phone at refuelling points (service stations) or near fuels or chemicals. Turn off your phone whenever directed by warning signs or instructions. Your phone could cause explosions or fire in and around fuel or chemical storage and transfer areas or blasting areas. Do not store or carry flammable liquids, gases, or explosive materials in the same compartment as the phone, its parts, or accessories. Reduce the risk of repetitive motion injuries When sending text messages or playing games on your phone, hold the phone with a relaxed grip, press the keys lightly, use special features that reduce the number of keys you have to press (such as templates and predictive text), and take frequent breaks. Safety precautions Drive safely at all times Avoid using your phone while driving and obey all regulations that restrict the use of mobile phones while driving. Use hands-free accessories to increase your safety when possible. Follow all safety warnings and regulations Comply with any regulations that restrict the use of a mobile phone in a certain area. Use only Samsung-approved accessories Using incompatible accessories may damage your phone or cause injury. Turn off the phone near medical equipment Your phone can interfere with medical equipment in hospitals or health care facilities. Follow all regulations, posted warnings, and directions from medical personnel. Turn off the phone or disable the wireless functions when in an aircraft Your phone can cause interference with aircraft equipment. Follow all airline regulations and turn off your phone or switch to a mode that disables the wireless functions when directed by airline personnel. Protect batteries and chargers from damage Avoid exposing batteries to very cold or very hot temperatures (below 0° C/32° F or above 45° C/ 113° F). Extreme temperatures can reduce the charging capacity and life of your batteries. Prevent batteries from contacting metal objects, as this can create a connection between the + and - terminals of your batteries and lead to temporary or per…

Text truncated - open the document above for the full version.

June 11, 2014 Fe deral C omm unications Commission 7435 O akland Mills Road Columbia MD 21046 Subject: Attestation Letter of WLAN channels FCC ID: A3LSMG130HN The WLAN channels in USA Mode Channel Frequency (MHz) Ad-Hoc support or AP mode 802.11b/g/n 1-11 2412-2462 Yes (AP support as wireless hot spot when configured with WWAN module) 12, 13 2467-2472 Channels not supported on US. a. The device only uses Ch. 1-11 and FCC TX power table by S/W in Production. Best Regards Sang Kyung (Peter), Ra/ General Manager Samsung Electronics CO. LTD TEL: 973-808-6362 FAX: 973-808-6361 E-mail: [email protected]

B1_TRXB8_TRX 2G_HB_PA / 2G_LB_PA B8_PA_INB1_PA_IN Transceiver SR3131B 3G PAM Tx ModuleSKY77585 GPS RF TX: RED RF RX: BLUE TX & RX : GREEN CONTROL,CLK: BLACK %7B:$.( ANT DPX Filter (B8)RX_LB2P,N FM_IN GSM_PA_EN, PA_RAMP 2G_TRX_3G_RX_I,Q_N,P R FSDA SM-G130H N  1 Block Diagram ANT RFSCKRFSEN0 &/.0B6,1( 26 MHz SQ2D02600B2QBG 3G_TX_I,Q_N,P WGPRS (B1)SAYRF1G95HJ0F0A(B8)SFX897UZ102 (B1)RX_HBA1P,N SKY77758 PA_COUPLE_OUT B1_PA_EN / B8_PA_EN B8_PA_OUTB1_PA_OUT DCS, PCS SAW SFWG42MB002 GSM850 SAW SFH881PA002 PCS_RXP,MDCS_RXP,M GSM850_RXP,M BCM4752 0 GPS_CAL_CLK 2G/3G Band GPS_LNA_EN GPS SAWSFHG89DA002 GPS_LNA_IN ANTGPS GPS_RST SLEEP_CLK_32K 26 MHz KT2106A26000ACW18TAG GPS_TCXO_OUT GPS_PWONGPS_TXD,RXD MODEM 6&$ WIFI / BT / FM BCM43 43 %7B5(*B21%7B567B1 )0B/)0B5 ANT (Headset -E/P) %7B3&0B,1287 %7B3&0B&/.%7B3&0B6<1& :/$1B6',2B'a :/$1B6',2B&/.:/$1B6',2B&0' %7B8$57B7;5;' %7B8$57B&76B1 %7B8$57B576B1 :/$1B+267B:$.( :/$1B5(*B21 :/$1B0+=B&/. )URP65%75&9 :/$1B&/.B5(4 6/((3B&/.B. FM Radio (DCXO) =======================[All Support Band]2G : GSM850/900/1800/19003G : WCDMA2100/900- WCDMA 1 : 2100 MHz- WCDMA 8 : 900 MHz=======================[Within USA Support Band, Rx and Tx Frequency]- GSM850 :Rx 869.2 ~ 912.6 MHzTx 824.2 ~ 848.8 MHz- GSM1900 :Rx 1930.2 ~ 1989.8 MHzTx 1850.2 ~ 1909.8 MHz======================= 1.0 GHz NFC SFWRN5 2 7.12 MHz SQBF02712C6JFG NFC ANT(Inside Battery) BT/WIFI ANT LC Filter LFB182G45SG9B740 Data, Rst, Clk REQ, NFC_SWP

MODEM SC7715A WIFI / BT / FM BCM4343 Filter LFB182G45SG9B740 BT/WLAN TX/RX BT_WAKE BT_HOST_WAKE BT_REG_ON BT_RST_N FM_L, FM_R BT_OCM_IN,OUT BT_PCM_CLK BT_PCM_SYNC WLAN_SDIO_D0~3 WLAN_SDIO_CLK WLAN_SDIO_CMD BT_UART_TX,RXD BT_UART_CTS_N BT_UART_RTS_N WLAN_HOST_WAKE WLAN_CLK_REQ WLAN_REG_ON SLEEP_CLK_32K DCXO 26MHz WLAN_26M_CLK SM-G130H O REV1.1 BT/WIFI RF BLOCK DIAGRAM RF TX/RX : REDCONTROL, CLK : BLUE ANT From Transceiver

 June 11  4             !" # $  $ %   &" SMG130HN  ' () &%  "  *    )+ ,  $  - -. $)  / 0 11-2-.324#  5)    4)) )$  4 5 )   $    $ +    $ %-     ! ! !!! "! # $!%& #'$, Product equality declaration.  6 ,        %  # +  +   + +% $     +  $)# +  -')+     $ ,    5)) $    + % 4 5,  +   $, 5 ) -  &    ,      2+    * 7 68 $ )  /+ %2    +%4))  55     1-9 ) +     1-24)   5)    , $      $  )   5 $ 4% ) : ,-(#  5)   5 ) 8  $ %#  )$  4 5)    ( ')  *+!# ,!!# $ # &-!$  &    5)    + 2 &$     +    5$ ,4+  5  $       ) $   4,$ + ,4 )5  $ # +   ) :  -  ;5        5<% 50*32=>  5    5?  -@' '?@".8998 6A".8998 ?8 "B  5-      

129, Samsung-Ro, Yeongtong-Gu, Suwon-Si, Gyeonggi-Do, KOREA Date : October 22 nd , 2013 UL Verification Services Inc. Certification Division 47173 Benicia Street Fremont, CA 94538, USA To whom it may concern: I, the undersigned, hereby authorize UL Verification Services Inc. to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by UL Verification Services Inc. on our behalf shall have the same effect as acts of our own. I, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). In authorizing UL Verification Services Inc. as our agent, we still recognize that we are responsible to: comply with the relevant provisions of the certification program; b) make all necessary arrangements for the conduct of the evaluation, including provision for examining documentation and access to all areas, records (including internal audit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment, surveillance, reassessment) and resolution of complaints; c) make claims regarding certification only in respect of the scope for which certification has been granted; d) do not use our product certification in such a manner as to bring the Certification Division into disrepute and not make any statement regarding our product certification which the Certification Division may consider misleading or unauthorized; e) upon suspension or cancellation of certification, discontinue use of all advertising matter that contains any reference thereto and return any certification documents as required by the Certification Division; 129, Samsung-Ro, Yeongtong-Gu, Suwon-Si, Gyeonggi-Do, KOREA f) use certification only to indicate the products are certified as being in conformity with specified standards; g) endeavor to ensure that no certificate or report nor any part thereof is used in a misleading manner; h) ensure that any reference to our product certification in communication media such as documents, brochures or advertising, complies with the requirements of the Certification Division; i) keep a record of all complaints made known to the us relating to the product’s compliance with requirements of the relevant standard and to make these records available to the Certification Division when requested; j) take appropriate action with respect to such complaints and any deficiencies found in products or services that affect compliance with the requirements for certification; k) document the actions taken. This authorization is valid until further written notice from the applicant. Sincerely Yours, Sang Kyung (Peter), RA Head of QA Lab (General Manager) Samsung Electronics America, Inc 19 Chapin Rd, Bldg D Pine Brook, NJ 07058

Label and Location Model: SM-G130HN FCC ID: A3LSMG130HN Label: Location: Top Back of device Bottom Label is placed inside of the battery compartment. Label

SAMSUNG ELECTRONICS CO., LTD 129, Samsung-ro,Yeongtong-gu Suwon-si,Gyeonggi-do, 443-742 Korea June 11, 2014 Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 SUBJECT : Label Statement FCC ID : A3LSMG130 HN Gentlemen: We hereby provide the label statement letter for the above-mentioned device by a new label statement policy of KDB 784748 D01. The label statement is as follows: The FCC ID label is located in the battery compartment. While the battery cover is install ed when the unit is shipped from the factory, the battery is never installed prior to sale, s o the user must remove the cover in order to install the battery and operate the device. A t this time the FCC ID is readily visible to the user. The label is permanently attached by acrylic glue and not easily removed from the device. This statement could not be included in the label. So we inform you of it through this letter. Should you have any questions or comments concerning the above, please contact the undersigned. Sincerely Yours, Sang Kyung (Peter), Ra/ General Manager Samsung Electronics CO. LTD TEL: 973-808-6362 FAX: 973-808-6361 E-mail: [email protected]

Tyco Electronics Corporation 1 PRODUCT SPECIFICATION Product Name INTERNAL ANTENNA [2Shot Molding Antenna] MFG. Location China Model Samsung SM-G130HN Main Antenna Tool MP Tool Core material : STAVAX SEC Code Provider Tyco Electronics Corporation Weight Data 1.25g Part Number 2108825-1 Samsung Electronics Originated Confirmed Approved Tyco Electronics Originated Confirmed Approved Engineering Engineering Project Manager J.G.Park D.Y.Kim S.C. Lee APR 25 th , 2014 APR 25 th , 2014 APR 25 th , 2014 Tyco Electronics Corporation 4 th Fl., Seocho Bldg., 1365-10, Seocho-Dong, Seocho-Ku, Seoul, Korea Ph: +82-2-3415-4547 Fax: +82-2-3486-3808 Table of Contents Tyco Electronics Corporation 2 1. CTQ Items ---------------------------------------------------------------------------------------------------- 4 2. Critical issues during development stage ----------------------------------------------------------------- 4 3. Sample manufacturing data and yield data --------------------------------------------------------------- 5 4. Revision Sheet ------------------------------------------------------------------------------------------------ 7 5. Part Number List ---------------------------------------------------------------------------------------------- 9 6. Product Description ------------------------------------------------------------------------------------------- 10 Description Part Number Materials Applicable Documents 7. Electrical Properties ------------------------------------------------------------------------------------------- 11 Frequency Band Impedance Matching Circuit V.S.W.R. Directivity Gain Maximum Power Electrical Performance 8. Product Drawing --------------------------------------------------------------------------------------------- 18 9. Standard Test Data ------------------------------------------------------------------------------------------ 21 RF data with JIG Mechanical Data 10. Packaging ------------------------------------------------------------------------------------------------------ 38 11. Manufacturing Process / Quality Assurance--------------------------------------------------------------- 40 Process Flow Tyco Electronics Corporation 3 Process Control Plan 12. Picture of Testing with SET and Test JIG ---------------------------------------------------------------- 43 13. VSWR Comparission -------------------------------------------------------------------------------------------- 45 14. 안테나 Edge 시료 VSWR 3점 정합성 측정 DATA ---------------------------------------------------------- 53 15. TE Qingdao RF Jig -------------------------------------------------------------------------------------------- 56 16. Molding parameters-------------------------------------------------------------------------------------------- 60 17. Outgoing inspection report ----------------------------------------------------------------------------------- 61 Tyco Electronics Corporation 4 1. CTQ Items (CTF: Critical to Factor/Function) 1.1 Electrical characteristics (VSWR) (Cpk value > 1.33) Main antenna CTF Item Spec.(VSWR) Sample q’tyCpkRemark 596 MHz 2.5 < VSWR < 3.5 50pcs 1.96 Refer to page 21~28 872 MHz 2.6 < VSWR < 3.6 50pcs 2.02 Refer to page 21~28 1259 MHz 1.6 < VSWR < 2.6 50pcs2.06 Refer to page 21~28 1458 MHz 1.5 < VSWR < 2.5 50pcs 1.59 Refer to page 21~28 REAR+Main antenna CTF Item Spec.(VSWR) Sample q’tyCpkRemark 628 MHz 3.5 < VSWR < 4.5 40pcs 1.40 Refer to page 29~36 946 MHz 3.5 < VSWR < 4.5 40pcs 1.44 Refer to page 29~36 1345 MHz 3.7 < VSWR < 4.7 40pcs1.33 Refer to page 29~36 1779 MHz 3.5 < VSWR < 4.5 40pcs 1.80 Refer to page 29~36 1.2 Mechanical characteristics (Cpk value > 1.0 ) Main antenna CTF Item Spec. Sample q’ty Cpk Remark Size Pattern 2. Critical issues during development stage No need Tyco Electronics Corporation 5 3. Sample manufacturing data and yield data Molding condition(Supplier : Mobitec) Plating(Supplier : TE Qingdao) PC molding temperature 245°C Chemical supplier TE’s desiginated one Actual measured mold Temperature (Upper / Lower mold) Upper : 70~80°C Lower : Normal cooling Etching (Dilution/Temperature/ Time) 75°C/30min Resin drying (Temperatuer/time) 95~105°C/6hr Cu plating (Dilution/Temperature/ Time) 58°C/160min ◆ Sample making yield data(수율데이타) #1차 금형 Molding Plating Painting Assembly/ RF inspection RTY NG Q'ty / Input Q'ty (pcs) 971 / 1000 953/971931/ 953931/ 931 1000 Yield(%) 96.6 98.2 98.0 100..0 93.1 Worst3 NG 1. Short shot (29pcs) 1. void plating（18pcs） 1. Bubble (22pcs) Result : OK (NG mode, NG Q'ty) Tyco Electronics Corporation 6 4. Revision Sheet No. Date Rev Description of Changes Remarks Tyco Electronics Corporation 7 5. Part Number List - Part list Part Name Material & Spec Material supplier ColorManufacturing site Manufacturing method Remark Carrier 1st shot : PC (EH-1051) Cheil White MBT, Korea Injection 2nd shot : ABS (AX06437) Sabic Gray Plating Electroless plating 1) Cu : 10~14㎛ 2) Ni : 3~5㎛ Gray TE Qingdao, china Plating No. PART No. Description Remarks 1 2108825-1 Internal Antenna – SM-G130H Main Tyco Electronics Corporation 8 6. Product Description Description This specification covers the requirements for product performance, test methods and quality assurance provisions of the INTERNAL ANTENNA for the Samsung SM- G130H mobile phone hand set. Currently, the product is manufactured using 1-shot molding in conjunction with laser activation of the antenna surface and selective plating techniques. The 2-Shot MID technology will be used to manufacture this part in mass production. Part Number Tyco Electronics Part Number : 2108825-1 Materials A. Crystalline Polymer 1st shot: Cheil EH-1051 2nd shot: Sabic AX06437 B. Plating: 10.0-14.0μm of Electroless Copper over plated with 3.0-5.0μm of Low Temperature Nickel. Applicable Documents The following documents form a part of this specification to the extent specified herein. In the event of conflict between the requirements of this specification and the product drawing, the product drawing shall …

Text truncated - open the document above for the full version.

Operational Description / Schematics Note (Confidential) FCC ID: A3LSMG130HN Model: SM-G130HN Date: 2014-06-12 Please note that this Operational Description provides a complete description of the subject model. However, the chip(s) within the device may include additional capabilities that are not implemented for this device. Technical information pertaining to these additional capabilities may be shown within this document. The actual supported capabilities as implemented for this model are listed below. Please find below the capabilities that are operational for this device: Within USA:  GSM/GPRS 850  GSM/GPRS 1900  GPRS Multi-slot Class 12  2.4 GHz 802.11(b/g/n)  Bluetooth v4.0 + EDR  Mobile Hotspot  FM Receiver  EDGE Rx Only  NFC Function Non-USA:  GSM/GPRS 900  GSM/GPRS 1800  UMTS 2100  UMTS 900  HSDPA (64QAM)  HSUPA (QPSK)  EDGE Rx Only (GSM900, 1800) Although the chipset documentation may indicate possible functions, the following have been permanently hardware disabled in this device and cannot be enabled by the end user or service provider  802.11a  FM Transmitter  UMTS1900 ٛٛٛٛٛٛٛٛOperational Description 1. SM-G130HN RF Circuit Description 1.1 Transceiver : SR3131B SR3131B is a highly integrated, single-die radio transceiver IC that supports 3G WCDMA, HSDPA, HSUPA and GSM/EDGE ( HEDGE 2.5 G) operation without the need for external transmit SAW filters, baluns or LNAs. Implemented in low cost bulk CMOS, it is optimized to meet the challenges of today ’s small form factor, power efficient, high performance cellular handsets. The SR3131B has total of six transmit ports and six receive ports ( differential). The SR3131B provides multiple bands of operation. The SR3131B offers a cost competitive and small footprint radio solution for multi-mode, multi- band applications with the highest performance at the lowest power. The linear transceiver architecture of SR3131B is utilized for both 2.5G and 3G systems, offering excellent performance and design margins over 3 GPP requirements. For 2.5 G, a direct modulation scheme is used in the transmitter and performance of 2.5G receive and transmit chains is such that no additional RF filters are required to meet out-of-band noise specifications. The output driver stage for eachtransmitter chain is single-ended and matched to 50Ω. The transceiver supports analog I/Q interfaces for 2.5G and 3G with simple 3- wire bus architecture to program the radio. Features • Fully integrated single chip multi-mode, multi-band HEDGE transceiver in bulk CMOS • Quad-band GSM operation: USGSM850,EGSM900,DCS1800 and PCS1900 • Support for 3 GPP Band 1 to Band 6, Band 8, Band 9, and Band 10 • No off-chip RF SAW filters required for GSM • Fully integrated LNAs in all receive bands and all modes of operation • Completely integrated frequency synthesizer and VCO • All TX outputs are single-ended and internally matched to 50Ω • Analog IQ interface • Built-in DCXO • Ultra Low Power Consumption • Three sets of reference outputs • Single SPI operation •5.5 mm x7 mm QFN 50 pin 0.4 mm pitch package • RoHS Compliance • Halogen Free ( HF) Compliance Applications • Dual mode 3 Gand GSM Modem • Dual mode 3 Gand GSM Feature Phone •3G Smart Phone 1.2 WGPRS Tx Module : SKY77585-11 SKY77585-11 is a transmit and receive Front-End Module ( FEM) with integrated power amplifier control designed in a low profile, compact form factor for quad-band cellular handsets comprising GSM850 / GSM900 and DCS1800 / PCS1900 operation. The SKY77585-11 offers a complete Transmit VCO-to-Antenna and Antenna-to-Receive SAW filter solution. The FEM also supports Class 12 General Packet Radio Service ( GPRS) multi-slot operation and EDGE downlink. The module consists of a GSM850/GSM900 PA block and a DCS1800/PCS1900 PA block, impedance-matching circuitry for 50 ohm input and output impedances, Tx harmonics filtering, high linearity / low insertion loss RF switch, and a Power Amplifier Control ( PAC) block. One PA block supports the GSM850 / GSM900 bands and the other PA block supports the DCS1800 / PCS1900 bands. Both PA blocks share common power supply pads to distribute current. The output of each PA block and the outputs to the four receive pads are connected to the antenna pad through an RF switch. Four broadband interchangeable receive ports provide flexibility to support multimode and multiband configurations. The GaAs die, the CMOS die, the Switch die, and passive components are mounted on a multi-layer laminate substrate. The assembly is encapsulated with plastic overmold. Band selection and control of transmit and receive are performed using four external control pads. Refer to the block diagram in Figure 1 below. The band select pad, BS1, BS2, Mode, and TxEN select GSM850, GSM900, DCS, and PCS modes of operation. Transmit enable TxEN controls receive or transmit mode of the RF switch ( Tx = logic 1). Proper timing between transmit enable TxEN and Analog Power Control VRAMP allows for high isolation between the antenna and Tx – VCO while the VCO is being tuned prior to the transmit burst. The SKY77585-11 is compatible with logic levels from 1.2 V to 2.9 V for BS1, BS2, MODE, and TxEN pads. Features • High efficiency 42% ( GSM850,GSM900) 39% ( DCS1800) 38% ( PCS1900) • Low transmit supply current 1.35 A ( GSM850, GSM900) 0.94 A ( DCS1800) 0.96 A ( PCS1900) •50 ohm matched Input/Output • Tx-VCO-to-antenna and antenna-to-Rx-SAW filter RF interface • RF switch affords high linearity, low insertion loss, and 0V DC on Rx ports • Small, low profile package :6.0 mm x6.0 mm x0.9 mm, 28- pad configuration 1.3 3G PAM : SKY77758-21 The SKY77758-21 Power Amplifier Module ( PAM) is a fully matched, 14- pad, surface mount module developed for Wideband Code Division Multiple Access ( WCDMA) applications. This small and efficient module packs full coverage for WCDMA Bands I, II, IV, V, VIII into a single compact package. The SKY77758-21 meets stringent spectral linearity requirements for WCDMA…

Text truncated - open the document above for the full version.

11. WLAN Operational Description Within USA : - WLAN : 2.4GHz 802.11 b/g/n - BT : v4.0 Although the chipset documentation may indicate possible functions, The following have been permanently hardware disabled in this device and cannot be enabled by the end user or service provider : (BT) HS compliant : Not Supported (WLAN) 5GHz Features : Not Supported Channel Bonding in 2.4GHz : Not Supported (FM Radio) FM Transmitter RDS - AF : Not Supported MODEM SC7715A WIFI / BT / FM BCM4343 Filter LFB182G45SG9B740 BT/WLAN TX/RX BT_WAKE BT_HOST_WAKE BT_REG_ON BT_RST_N FM_L, FM_R BT_OCM_IN,OUT BT_PCM_CLK BT_PCM_SYNC WLAN_SDIO_D0~3 WLAN_SDIO_CLK WLAN_SDIO_CMD BT_UART_TX,RXD BT_UART_CTS_N BT_UART_RTS_N WLAN_HOST_WAKE WLAN_CLK_REQ WLAN_REG_ON SLEEP_CLK_32K DCXO WLAN_26M_CLK SM-G130H 1 BT/WIFI RF BLOCK DIAGRAM RF TX/RX : REDCONTROL, CLK : BLUE ANT From Transceiver Broadcom ® March 17, 2014 • 4343S-DS101-R Page 16 Overview BROADCOM CONFIDENTIAL BCM4343S Preliminary Data Sheet Figure 2: BCM4343S Block Diagram Common and Radio Digital SWREG LDOx2 LPO XTAL OSC. BPF WLAN SDIO gSPI JTAG* ARM CM3 Backplane BT-WLAN ECI WDT OTP GPIO UART JTAG* RAM ROM PMU Control MAC LNPPHY Radio BTFM Clock Control Sleep- time Keeping Clock Management PMU PMU Ctrl POR IF PLL BT PHY Modem Digital Demod. & Bit Sync Digital Mod. BPL Buffer APU BT Clock/ Hopper LCU RX/TX Buffer WiMax Coex PTU UART Debug UART I 2 S/PCM GPIO Wake/ Sleep Ctrl I/O Port Control AHB Bus Matrix Cortex M3 ETM JTAG* SDP RAM ROM Patch InterCtrl DMA Bus Arb ARM IP WD Timer SW Timer GPIO Ctrl FM RX FM Digital FM RF RSSI LO Gen. DPLL LNA FM Demod. MDX RDS Decode Control FM I/F APB FM_RX RF PA Digital I/O SDIO or gSPI Debug IEEE 802.11a/b/g/n GPIOUART 2.4 GHz 2.4 GHz PA Shared LNA PowerSupplySleep CLKXTAL WiMax Coex. BlueRF Interface LPO XO Buffer XTAL VBAT VREGs BT_REG_ON AHB to APB Bridge AHB ADCADC Supported over SDIO or BT PCM JTAG supported over SDIO or BT PCM * Via GPIO configuration, JTAG is supported over SDIO or BT PCM POR WL_REG_ON Confidential for Samsung WLAN System Interfaces Broadcom ® March 17, 2014 • 4343S-DS101-RPage 32 BCM4343S Preliminary Data Sheet BROADCOM CONFIDENTIAL Section 4: WLAN System Interfaces SDIO v2.0 The BCM4343S WLAN section supports SDIO version 2.0. for both 1-bit (25 Mbps) and 4-bit modes (100 Mbps), as well as high speed 4-bit mode (50 MHz clocks — 200 Mbps). It has the ability to map the interrupt signal on a GPIO pin. This out-of-band interrupt signal notifies the host when the WLAN device wants to turn on the SDIO interface. The ability to force control of the gated clocks from within the WLAN chip is also provided. SDIO mode is enabled using the strapping option pins. See Table 18 on page 92 for details. Three functions are supported: • Function 0 standard SDIO function. The maximum block size is 32 bytes. • Function 1 backplane function to access the internal System-on-a-Chip (SoC) address space. The maximum block size is 64 bytes. • Function 2 WLAN function for efficient WLAN packet transfer through DMA. The maximum block size is 512 bytes. SDIO Pin Descriptions Figure 10: Signal Connections to SDIO Host (SD 4-Bit Mode) Table 4: SDIO Pin Descriptions SD 4-Bit ModeSD 1-Bit ModegSPI Mode DATA0Data line 0DATAData lineDOData output DATA1Data line 1 or Interrupt IRQInterruptIRQInterrupt DATA2Data line 2NCNot usedNCNot used DATA3Data line 3NCNot usedCSCard select CLKClockCLKClockSCLK Clock CMDCommand lineCMDCommand lineDIData…

Text truncated - open the document above for the full version.